diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.c | 329 |
1 files changed, 0 insertions, 329 deletions
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.c deleted file mode 100644 index ea7f20a908..0000000000 --- a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/cpuCommonF10Utilities.c +++ /dev/null @@ -1,329 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * AMD Family_10 specific utility functions. - * - * Provides numerous utility functions specific to family 10h. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: CPU/F10 - * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $ - * - */ -/* - ***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/*---------------------------------------------------------------------------------------- - * M O D U L E S U S E D - *---------------------------------------------------------------------------------------- - */ -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "cpuRegisters.h" -#include "cpuServices.h" -#include "GeneralServices.h" -#include "cpuFamilyTranslation.h" -#include "cpuCommonF10Utilities.h" -#include "Filecode.h" -CODE_GROUP (G1_PEICC) -RDATA_GROUP (G2_PEI) - -#define FILECODE PROC_CPU_FAMILY_0X10_CPUCOMMONF10UTILITIES_FILECODE - -/*---------------------------------------------------------------------------------------- - * D E F I N I T I O N S A N D M A C R O S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * T Y P E D E F S A N D S T R U C T U R E S - *---------------------------------------------------------------------------------------- - */ -/** - * Node ID MSR register fields. - * Provide the layout of fields in the Node ID MSR. - */ -typedef struct { - UINT64 NodeId:3; ///< The core is on the node with this node id. - UINT64 NodesPerProcessor:3; ///< The number of Nodes in this processor. - UINT64 HeapIndex:6; ///< The AP core heap index. - UINT64 :(63 - 11); ///< Reserved. -} NODE_ID_MSR_FIELDS; - -/// Node ID MSR. -typedef union { - NODE_ID_MSR_FIELDS Fields; ///< Access the register as individual fields - UINT64 Value; ///< Access the register value. -} NODE_ID_MSR; - -/*---------------------------------------------------------------------------------------- - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * E X P O R T E D F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------*/ -/** - * Set warm reset status and count - * - * @CpuServiceMethod{::F_CPU_SET_WARM_RESET_FLAG}. - * - * This function will use bit9, and bit 10 of register F0x6C as a warm reset status and count. - * - * @param[in] FamilySpecificServices The current Family Specific Services. - * @param[in] StdHeader Handle of Header for calling lib functions and services. - * @param[in] Request Indicate warm reset status - * - */ -VOID -F10SetAgesaWarmResetFlag ( - IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, - IN AMD_CONFIG_PARAMS *StdHeader, - IN WARM_RESET_REQUEST *Request - ) -{ - PCI_ADDR PciAddress; - UINT32 PciData; - - PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_0, HT_INIT_CTRL); - LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader); - - // bit[5] - indicate a warm reset is or is not required - PciData &= ~(HT_INIT_BIOS_RST_DET_0); - PciData = PciData | (Request->RequestBit << 5); - - // bit[10,9] - indicate warm reset status and count - PciData &= ~(HT_INIT_BIOS_RST_DET_1 | HT_INIT_BIOS_RST_DET_2); - PciData |= Request->StateBits << 9; - - LibAmdPciWrite (AccessWidth32, PciAddress, &PciData, StdHeader); -} - -/*---------------------------------------------------------------------------------------*/ -/** - * Get warm reset status and count - * - * @CpuServiceMethod{::F_CPU_GET_WARM_RESET_FLAG}. - * - * This function will bit9, and bit 10 of register F0x6C as a warm reset status and count. - * - * @param[in] FamilySpecificServices The current Family Specific Services. - * @param[in] StdHeader Config handle for library and services - * @param[out] Request Indicate warm reset status - * - */ -VOID -F10GetAgesaWarmResetFlag ( - IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, - IN AMD_CONFIG_PARAMS *StdHeader, - OUT WARM_RESET_REQUEST *Request - ) -{ - PCI_ADDR PciAddress; - UINT32 PciData; - - PciAddress.AddressValue = MAKE_SBDFO (0, 0 , PCI_DEV_BASE, FUNC_0, HT_INIT_CTRL); - LibAmdPciRead (AccessWidth32, PciAddress, &PciData, StdHeader); - - // bit[5] - indicate a warm reset is or is not required - Request->RequestBit = (UINT8) ((PciData & HT_INIT_BIOS_RST_DET_0) >> 5); - // bit[10,9] - indicate warm reset status and count - Request->StateBits = (UINT8) ((PciData & (HT_INIT_BIOS_RST_DET_1 | HT_INIT_BIOS_RST_DET_2)) >> 9); -} - -/*---------------------------------------------------------------------------------------*/ -/** - * Use the Mailbox Register to get the Ap Mailbox info for the current core. - * - * @CpuServiceMethod{::F_CPU_AMD_GET_AP_MAILBOX_FROM_HARDWARE}. - * - * Access the mailbox register used with this NB family. This is valid until the - * point that some init code initializes the mailbox register for its normal use. - * The Machine Check Misc (Thresholding) register is available as both a PCI config - * register and a MSR, so it can be used as a mailbox from HT to other functions. - * - * @param[in] FamilySpecificServices The current Family Specific Services. - * @param[out] ApMailboxInfo The AP Mailbox info - * @param[in] StdHeader Handle of Header for calling lib functions and services. - * - */ -VOID -F10GetApMailboxFromHardware ( - IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, - OUT AP_MAILBOXES *ApMailboxInfo, - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - UINT64 MailboxInfo; - - LibAmdMsrRead (MSR_MC_MISC_LINK_THRESHOLD, &MailboxInfo, StdHeader); - // Mailbox info is in bits 32 thru 43, 12 bits. - ApMailboxInfo->ApMailInfo.Info = (((UINT32) (MailboxInfo >> 32)) & (UINT32)0x00000FFF); - LibAmdMsrRead (MSR_MC_MISC_L3_THRESHOLD, &MailboxInfo, StdHeader); - // Mailbox info is in bits 32 thru 43, 12 bits. - ApMailboxInfo->ApMailExtInfo.Info = (((UINT32) (MailboxInfo >> 32)) & (UINT32)0x00000FFF); -} - - -/*---------------------------------------------------------------------------------------*/ -/** - * Set the system AP core number in the AP's Mailbox. - * - * @CpuServiceMethod{::F_CPU_SET_AP_CORE_NUMBER}. - * - * Access the mailbox register used with this NB family. This is only intended to - * run on the BSC at the time of initial AP launch. - * - * @param[in] FamilySpecificServices The current Family Specific Services. - * @param[in] Socket The AP's socket - * @param[in] Module The AP's module - * @param[in] ApCoreNumber The AP's unique core number - * @param[in] StdHeader Handle of Header for calling lib functions and services. - * - */ -VOID -F10SetApCoreNumber ( - IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, - IN UINT32 Socket, - IN UINT32 Module, - IN UINT32 ApCoreNumber, - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - UINT32 LocalPciRegister; - PCI_ADDR PciAddress; - AGESA_STATUS IgnoredStatus; - - GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredStatus); - PciAddress.Address.Function = FUNC_3; - PciAddress.Address.Register = 0x170; - LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); - ((AP_MAIL_EXT_INFO *) &LocalPciRegister)->Fields.HeapIndex = ApCoreNumber; - LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); -} - - -/*---------------------------------------------------------------------------------------*/ -/** - * Get this AP's system core number from hardware. - * - * @CpuServiceMethod{::F_CPU_GET_AP_CORE_NUMBER}. - * - * Returns the system core number from the scratch MSR, where - * it was saved at heap initialization. - * - * @param[in] FamilySpecificServices The current Family Specific Services. - * @param[in] StdHeader Handle of Header for calling lib functions and services. - * - * @return The AP's unique core number - */ -UINT32 -F10GetApCoreNumber ( - IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - NODE_ID_MSR NodeIdMsr; - - LibAmdMsrRead (0xC001100C, &NodeIdMsr.Value, StdHeader); - return (UINT32) NodeIdMsr.Fields.HeapIndex; -} - - -/*---------------------------------------------------------------------------------------*/ -/** - * Move the AP's core number from the mailbox to hardware. - * - * @CpuServiceMethod{::F_CPU_TRANSFER_AP_CORE_NUMBER}. - * - * Transfers this AP's system core number from the mailbox to - * the NodeId MSR and initializes the other NodeId fields. - * - * @param[in] FamilySpecificServices The current Family Specific Services. - * @param[in] StdHeader Handle of Header for calling lib functions and services. - * - */ -VOID -F10TransferApCoreNumber ( - IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - AP_MAILBOXES Mailboxes; - NODE_ID_MSR NodeIdMsr; - UINT64 ExtFeatures; - - NodeIdMsr.Value = 0; - FamilySpecificServices->GetApMailboxFromHardware (FamilySpecificServices, &Mailboxes, StdHeader); - NodeIdMsr.Fields.HeapIndex = Mailboxes.ApMailExtInfo.Fields.HeapIndex; - NodeIdMsr.Fields.NodeId = Mailboxes.ApMailInfo.Fields.Node; - NodeIdMsr.Fields.NodesPerProcessor = Mailboxes.ApMailInfo.Fields.ModuleType; - LibAmdMsrWrite (0xC001100C, &NodeIdMsr.Value, StdHeader); - - // Indicate that the NodeId MSR is supported. - LibAmdMsrRead (MSR_CPUID_EXT_FEATS, &ExtFeatures, StdHeader); - ExtFeatures = (ExtFeatures | BIT51); - LibAmdMsrWrite (MSR_CPUID_EXT_FEATS, &ExtFeatures, StdHeader); -} - - -/*---------------------------------------------------------------------------------------*/ -/** - * Return a number zero or one, based on the Core ID position in the initial APIC Id. - * - * @CpuServiceMethod{::F_CORE_ID_POSITION_IN_INITIAL_APIC_ID}. - * - * @param[in] FamilySpecificServices The current Family Specific Services. - * @param[in] StdHeader Handle of Header for calling lib functions and services. - * - * @retval CoreIdPositionZero Core Id is not low - * @retval CoreIdPositionOne Core Id is low - */ -CORE_ID_POSITION -F10CpuAmdCoreIdPositionInInitialApicId ( - IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - UINT64 InitApicIdCpuIdLo; - - // Check bit_54 [InitApicIdCpuIdLo] to find core id position. - LibAmdMsrRead (MSR_NB_CFG, &InitApicIdCpuIdLo, StdHeader); - InitApicIdCpuIdLo = ((InitApicIdCpuIdLo & BIT54) >> 54); - return ((InitApicIdCpuIdLo == 0) ? CoreIdPositionZero : CoreIdPositionOne); -} |