diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrcSeedTrain.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrcSeedTrain.c | 624 |
1 files changed, 0 insertions, 624 deletions
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrcSeedTrain.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrcSeedTrain.c deleted file mode 100644 index 044e0bf3dd..0000000000 --- a/src/vendorcode/amd/agesa/f15/Proc/Mem/Tech/mtthrcSeedTrain.c +++ /dev/null @@ -1,624 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mtthrcSt.c - * - * Phy assisted DQS receiver enable seedless training - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Mem/Tech) - * @e \$Revision: 42643 $ @e \$Date: 2010-11-24 13:51:41 -0600 (Wed, 24 Nov 2010) $ - * - **/ -/***************************************************************************** -* -* Copyright (C) 2012 Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "mm.h" -#include "mn.h" -#include "mt.h" -#include "mttEdgeDetect.h" -#include "Filecode.h" -CODE_GROUP (G1_PEICC) -RDATA_GROUP (G2_PEI) - -#define FILECODE PROC_MEM_TECH_MTTHRCSEEDTRAIN_FILECODE -/*---------------------------------------------------------------------------- -3 * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -VOID -STATIC -MemTRdPosRxEnSeedSetDly3 ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN OUT UINT16 RcvEnDly, - IN OUT UINT8 ByteLane - ); - -VOID -STATIC -MemTRdPosRxEnSeedCheckRxEndly3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ); -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ -/*----------------------------------------------------------------------------- - * - * - * This function checks each bytelane for no window error. - * - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * @param[in,out] OptParam - Optional parameter - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemTTrackRxEnSeedlessRdWrNoWindBLError ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN OUT VOID *OptParam - ) -{ - UINT8 i; - SWEEP_INFO SweepData; - SweepData = *(SWEEP_INFO*)OptParam; - for (i = 0; i < ((TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8) ; i++) { - // - /// Skip Bytelanes that have already reached the desired result - // - if ((SweepData.ResultFound & ((UINT16)1 << i)) == 0) { - if (SweepData.TrnDelays[i] == SweepData.EndDelay) { - if ((SweepData.EndResult & ((UINT16) (1 << i))) != 0) { - TechPtr->ByteLaneError[i] = TRUE; - } else { - TechPtr->ByteLaneError[i] = FALSE; - } - } - } - } - return TRUE; -} -/*----------------------------------------------------------------------------- - * - * - * This function checks each bytelane for small window error. - * - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * @param[in,out] OptParam - Optional parameter(Unused) - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemTTrackRxEnSeedlessRdWrSmallWindBLError ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN OUT VOID *OptParam - ) -{ - TechPtr->ByteLaneError[TechPtr->Bytelane] = TRUE; - return TRUE; -} -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the RxEn delay - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * @param[in,out] *RcvEnDly - Receiver Enable Delay - * @param[in,out] *ByteLane - Bytelane - * -*/ -VOID -STATIC -MemTRdPosRxEnSeedSetDly3 ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN OUT UINT16 RcvEnDly, - IN OUT UINT8 ByteLane - ) -{ - TechPtr->NBPtr->ChannelPtr->RcvEnDlys[(TechPtr->ChipSel >> 1) * TechPtr->DlyTableWidth () + ByteLane] = RcvEnDly; - TechPtr->NBPtr->SetTrainDly (TechPtr->NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS ((TechPtr->ChipSel >> 1), ByteLane), RcvEnDly); - TechPtr->NBPtr->FamilySpecificHook[ResetRxFifoPtr] (TechPtr->NBPtr, TechPtr->NBPtr); -} -/* -----------------------------------------------------------------------------*/ -/** - * - * This function determines if the currert RxEn delay settings have failed - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * -*/ -VOID -STATIC -MemTRdPosRxEnSeedCheckRxEndly3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 MaxDlyDimm; - TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &MaxDlyDimm); - TechPtr->NBPtr->SetMaxLatency (TechPtr->NBPtr, TechPtr->MaxDlyForMaxRdLat); - TechPtr->DqsRdWrPosSaved = 0; - MemTTrainDQSEdgeDetect (TechPtr); -} -/* -----------------------------------------------------------------------------*/ -/** - * - * This function executes RdDQS training and if fails adjusts the RxEn Gross results for - * each bytelane - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - * @return TRUE - All bytelanes pass - * @return FALSE - Some bytelanes fail -*/ -BOOLEAN -MemTRdPosWithRxEnDlySeeds3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 ByteLane; - UINT16 PassTestRxEnDly[MAX_BYTELANES_PER_CHANNEL + 1]; - UINT16 FailTestRxEnDly[MAX_BYTELANES_PER_CHANNEL + 1]; - UINT16 FinalRxEnCycle[MAX_BYTELANES_PER_CHANNEL + 1]; - UINT16 RxOrig[MAX_BYTELANES_PER_CHANNEL]; - UINT8 i; - UINT8 j; - UINT8 NumBLWithTargetFound; - UINT8 MaxByteLanes; - INT16 RxEn; - BOOLEAN status; - BOOLEAN EsbNoDqsPosSave; - BOOLEAN OutOfRange[MAX_BYTELANES_PER_CHANNEL]; - BOOLEAN ByteLanePass[MAX_BYTELANES_PER_CHANNEL]; - BOOLEAN ByteLaneFail[MAX_BYTELANES_PER_CHANNEL]; - BOOLEAN RxEnMemClkTested[MAX_BYTELANES_PER_CHANNEL][MAX_POS_RX_EN_SEED_GROSS_RANGE]; - BOOLEAN RxEnMemClkSt[MAX_BYTELANES_PER_CHANNEL][MAX_POS_RX_EN_SEED_GROSS_RANGE]; - BOOLEAN RxEnDlyTargetFound[MAX_BYTELANES_PER_CHANNEL]; - BOOLEAN DlyWrittenToReg[MAX_BYTELANES_PER_CHANNEL]; - UINT16 RxEnDlyTargetValue[MAX_BYTELANES_PER_CHANNEL]; - UINT8 AllByteLanesOutOfRange; - UINT8 AllByteLanesSaved; - UINT8 TotalByteLanesCheckedForSaved; - UINT8 MemClkCycle; - MEM_NB_BLOCK *NBPtr; - CH_DEF_STRUCT *ChannelPtr; - NBPtr = TechPtr->NBPtr; - ChannelPtr = TechPtr->NBPtr->ChannelPtr; - NumBLWithTargetFound = 0; - status = FALSE; - EsbNoDqsPosSave = TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos]; - NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_SUSPEND; - IDS_HDT_CONSOLE (MEM_FLOW, "\n\nStart HW RxEn Seedless training\n\n"); - // 1. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[1:0][BlockRxDqsLock] = 1. - NBPtr->SetBitField (NBPtr, BFBlockRxDqsLock, 0x0100); - IDS_HDT_CONSOLE (MEM_FLOW, "\tChip Select: %02x \n", TechPtr->ChipSel); - IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t Byte: 00 01 02 03 04 05 06 07 ECC\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tRxEn Orig: "); - // - // Start sweep loops for RxEn Seedless Training - // - MaxByteLanes = (TechPtr->NBPtr->MCTPtr->Status[SbEccDimms] && TechPtr->NBPtr->IsSupported[EccByteTraining]) ? 9 : 8; //dmach - // - //Initialialize BL variables - // - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - OutOfRange[ByteLane] = FALSE; - ByteLanePass[ByteLane] = FALSE; - ByteLaneFail[ByteLane] = FALSE; - // 2. RxEnOrig = D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] result - // from 2.10.6.8.2 [Phy Assisted DQS Receiver Enable Training] - RxOrig[ByteLane] = TechPtr->RxOrig[ByteLane]; // Original RxEn Dly based on PRE results - RxEnDlyTargetFound[ByteLane] = FALSE; - RxEnDlyTargetValue[ByteLane] = 0; - IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RxOrig[ByteLane]); - for (i = 0; i < MAX_POS_RX_EN_SEED_GROSS_RANGE; i++) { - RxEnMemClkTested[ByteLane][i] = FALSE; - } - } - // Start MemClk delay sweep - for (i = 0; i < MAX_POS_RX_EN_SEED_GROSS_RANGE; i++) { - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\ti: %02x\n", i); - // Start direction sweep (0, - Positive, 1 - negative) - for (j = 0; j < MAX_POS_RX_EN_SEED_GROSS_DIR; j++) { - // Edge detect may run twice to see Pass to fail transition - // It is not run if the value are already saved - // Fail test is only done if pass is found - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tj: %02x\n", j); - // Reset Bytelane Flags for next sweep - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - ByteLaneFail[ByteLane] = FALSE; - ByteLanePass[ByteLane] = FALSE; - OutOfRange[ByteLane] = FALSE; - } - if (i == 0 && j == 1) { - continue; // Since i & j are the same skip - } - IDS_HDT_CONSOLE_DEBUG_CODE ( - IDS_HDT_CONSOLE (MEM_FLOW, "\t Byte: 00 01 02 03 04 05 06 07 ECC\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t Target BL Found: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", ((RxEnDlyTargetFound[ByteLane] == TRUE) ? 'Y' : 'N')); - } - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t Target BL Value: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", RxEnDlyTargetValue[ByteLane]); - } - ); - // - // Find the RxEn Delay for the Pass condition in the Pass to Fail transition - // "PassTestRxEnDly" - // - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t Setting PassTestRxEnDly\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t PassTestRxEnDly: "); - PassTestRxEnDly[ByteLane] = RxOrig[ByteLane]; - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (RxEnDlyTargetFound[ByteLane] == FALSE) { - // Calculate "PassTestRxEnDly" from current "RxEnDly" - // 3. RxEnOffset = MOD(RxEnOrig + 0x10, 0x40) - RxEn = (j == 0) ? ((INT16)RxOrig[ByteLane] + 0x10 + (0x40*i)) : ((INT16)RxOrig[ByteLane] + 0x10 - (0x40*i)); - // Check if RxEnDly is in a valid range - if ((RxEn >= NBPtr->MinRxEnSeedGross) && (RxEn <= NBPtr->MaxRxEnSeedTotal)) { - PassTestRxEnDly[ByteLane] = (UINT16)RxEn; - // 4. For each DqsRcvEn value beginning from RxEnOffset incrementing by 1 MEMCLK: - // A. Program D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] with - // the current value. - MemTRdPosRxEnSeedSetDly3 (TechPtr, PassTestRxEnDly[ByteLane], ByteLane); - OutOfRange[ByteLane] = FALSE; - } else { - OutOfRange[ByteLane] = TRUE; - } - } else { - PassTestRxEnDly[ByteLane] = RxEnDlyTargetValue[ByteLane]; - } - IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", PassTestRxEnDly[ByteLane]); - } - // Check if all BLs out of Range at "PassTestRxEnDly" - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t OutOfRange: "); - AllByteLanesOutOfRange = 0; - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (OutOfRange[ByteLane]) { - AllByteLanesOutOfRange++; - } - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N'); - } - if (AllByteLanesOutOfRange == MaxByteLanes) { - continue; // All BLs out of range, so skip - } - // Check if all BLs saved Results at "PassTestRxEnDly" - AllByteLanesSaved = 0; - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5); - if (RxEnDlyTargetFound[ByteLane] == FALSE) { - if (!RxEnMemClkTested[ByteLane][MemClkCycle]) { - AllByteLanesSaved++; - } - } - } - // Check if "RxEnDlyValueForPassCond" passed - if (AllByteLanesSaved != 0) { - // At least one BL has not been saved, so check if "PassTestRxEnDly" passed - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t Checking if PassTestRxEnDly Passes?\n\n"); - // 4B. Perform 2.10.6.8.5 [DQS Position Training]. - // Record the result for the current DqsRcvEn setting as a pass or fail depending if a data eye is found. - MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr); - IDS_HDT_CONSOLE_DEBUG_CODE ( - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t Byte: 00 01 02 03 04 05 06 07 ECC\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t\t Err Status: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (TechPtr->ByteLaneError[ByteLane] == TRUE) ? 'F' : 'P'); - } - ); - } else { - // All BLs saved, so use saved results for "PassTestRxEnDly" - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tAll BLs Saved at PassTestRxEnDly\n"); - IDS_HDT_CONSOLE_DEBUG_CODE ( - IDS_HDT_CONSOLE (MEM_FLOW, "\t Byte: 00 01 02 03 04 05 06 07 ECC\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t Save Err Stat: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5); - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", ((RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE) ? 'F' : 'P')); - } - ); - } - // Update Saved values for "PassTestRxEnDly" - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (RxEnDlyTargetFound[ByteLane] == FALSE) { - if (OutOfRange[ByteLane] == FALSE) { - MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5); - if (!RxEnMemClkTested[ByteLane][MemClkCycle]) { - RxEnMemClkTested[ByteLane][MemClkCycle] = TRUE; - RxEnMemClkSt[ByteLane][MemClkCycle] = TechPtr->ByteLaneError[ByteLane]; - } - } - } - } - // - // Find the RxEn Delay for the Fail condition in the Pass to Fail transition - // "FailTestRxEnDly" - // - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - DlyWrittenToReg[ByteLane] = FALSE; - } - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - FailTestRxEnDly[ByteLane] = PassTestRxEnDly[ByteLane] + 0x40; - } - IDS_HDT_CONSOLE_DEBUG_CODE ( - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t Byte: 00 01 02 03 04 05 06 07 ECC\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t FailTestRxEnDly: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", FailTestRxEnDly[ByteLane]); - } - ); - // Check if all BLs Saved Results at FailTestRxEnDly - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tSetting FailTestRxEnDly"); - AllByteLanesSaved = 0; - TotalByteLanesCheckedForSaved = 0; - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (RxEnDlyTargetFound[ByteLane] == FALSE) { - MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5); - // Check if RxEnDly + 40 is valid - if ((FailTestRxEnDly[ByteLane] >= NBPtr->MinRxEnSeedGross) && (FailTestRxEnDly[ByteLane] <= NBPtr->MaxRxEnSeedTotal)) { - if (RxEnMemClkTested[ByteLane][MemClkCycle]) { - AllByteLanesSaved++; - } - OutOfRange[ByteLane] = FALSE; - } else { - OutOfRange[ByteLane] = TRUE; - } - TotalByteLanesCheckedForSaved++; - } - } - // Check if all BLs out of Range condition at FailTestRxEnDly - AllByteLanesOutOfRange = 0; - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t OutOfRange: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (OutOfRange[ByteLane]) { - AllByteLanesOutOfRange++; - } - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N'); - } - if (AllByteLanesOutOfRange == MaxByteLanes) { - continue; // All BLs out of range, so skip - } - // Setting FailTestRxEnDly for any BL that was not saved - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t FailTestRxEnDly: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (RxEnDlyTargetFound[ByteLane] == FALSE) { - MemClkCycle = (UINT8) (PassTestRxEnDly[ByteLane] >> 5); - // Check if New RxEnDly has Passed - if ((RxEnMemClkTested[ByteLane][MemClkCycle] ? RxEnMemClkSt[ByteLane][MemClkCycle] : TechPtr->ByteLaneError[ByteLane]) == FALSE) { - if (OutOfRange[ByteLane] == FALSE) { - // BL has passed at "New RxEnDly", so check if "New RxEnDly" + 0x40 fails - MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5); - if (!RxEnMemClkTested[ByteLane][MemClkCycle]) { - // Only Set Delays for ByteLanes that have not been already tested - MemTRdPosRxEnSeedSetDly3 (TechPtr, FailTestRxEnDly[ByteLane], ByteLane); - DlyWrittenToReg[ByteLane] = TRUE; - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'Y'); - } else { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'N'); - } - ByteLanePass[ByteLane] = TRUE; - } else { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'O'); - } - } else { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'F'); - } - } else { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'N'); - } - } - // Check if BLs that passed at PassTestRxEnDly fail at FailTestRxEnDly - if (AllByteLanesSaved != TotalByteLanesCheckedForSaved) { - // At least one BL has not been saved, so check if FailTestRxEnDly passed - IDS_HDT_CONSOLE (MEM_FLOW, "\n\n\t\t Checking if FailTestRxEnDly Fails?\n"); - MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr); - IDS_HDT_CONSOLE_DEBUG_CODE ( - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t Byte: 00 01 02 03 04 05 06 07 ECC\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t Err Status: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (TechPtr->ByteLaneError[ByteLane] == TRUE) ? 'F' : 'P'); - } - ); - } else { - // All BLs saved, so use saved results for FailTestRxEnDly - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tAll BLs Saved at PassTestRxEnDly\n"); - IDS_HDT_CONSOLE_DEBUG_CODE ( - IDS_HDT_CONSOLE (MEM_FLOW, "\t Byte: 00 01 02 03 04 05 06 07 ECC\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t Save Err Stat: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5); - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE) ? 'F' : 'P'); - } - ); - } - // - // If BL failes at "FailTestRxEnDly" set FinalRxEnCycle - // - // Setting FinalRxEnCycle for any BL that Failed at FailTestRxEnDly - IDS_HDT_CONSOLE (MEM_FLOW, "\n Set FinalRxEnCycle: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (RxEnDlyTargetFound[ByteLane] == FALSE) { - MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5); - if (RxEnMemClkTested[ByteLane][MemClkCycle] ? RxEnMemClkSt[ByteLane][MemClkCycle] == TRUE : (TechPtr->ByteLaneError[ByteLane] && DlyWrittenToReg[ByteLane])) { - FinalRxEnCycle[ByteLane] = PassTestRxEnDly[ByteLane] - 0x10; - if (((UINT16) FinalRxEnCycle[ByteLane] >= NBPtr->MinRxEnSeedGross) && ((UINT16) FinalRxEnCycle[ByteLane] <= NBPtr->MaxRxEnSeedTotal)) { - // Since FailTestRxEnDly, we can set FinalRxEnCycle - MemTRdPosRxEnSeedSetDly3 (TechPtr, (UINT16) FinalRxEnCycle[ByteLane], ByteLane); - ByteLaneFail[ByteLane] = TRUE; - OutOfRange[ByteLane] = FALSE; - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'Y'); - } else { - OutOfRange[ByteLane] = TRUE; - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'N'); - } - } else { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'F'); - OutOfRange[ByteLane] = FALSE; - } - } else { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", 'Y'); - } - } - // Update Saved values for FailTestRxEnDly - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (RxEnDlyTargetFound[ByteLane] == FALSE) { - if (OutOfRange[ByteLane] == FALSE) { - MemClkCycle = (UINT8) (FailTestRxEnDly[ByteLane] >> 5); - if (!RxEnMemClkTested[ByteLane][MemClkCycle] && DlyWrittenToReg[ByteLane]) { - RxEnMemClkTested[ByteLane][MemClkCycle] = TRUE; - RxEnMemClkSt[ByteLane][MemClkCycle] = TechPtr->ByteLaneError[ByteLane]; - } - } - } - } - // Check for out of Range condition - AllByteLanesOutOfRange = 0; - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t OutOfRange: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (OutOfRange[ByteLane]) { - AllByteLanesOutOfRange++; - } - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (OutOfRange[ByteLane] == TRUE) ? 'Y' : 'N'); - } - if (AllByteLanesOutOfRange == MaxByteLanes) { - continue; // All BLs out of range so skip - } - IDS_HDT_CONSOLE_DEBUG_CODE ( - IDS_HDT_CONSOLE (MEM_FLOW, "\n FinalRxEnCycle: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - IDS_HDT_CONSOLE (MEM_FLOW, "%03x ", (UINT16) FinalRxEnCycle[ByteLane]); - } - IDS_HDT_CONSOLE (MEM_FLOW, "\n ByteLaneFail: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (ByteLaneFail[ByteLane] == TRUE) ? 'Y' : 'N'); - } - IDS_HDT_CONSOLE (MEM_FLOW, "\n ByteLanePass: "); - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - IDS_HDT_CONSOLE (MEM_FLOW, " %c ", (ByteLanePass[ByteLane] == TRUE) ? 'Y' : 'N'); - } - ); - // - // Check for exit condition - // PassTestRxEnDly = Pass and FailTestRxEnDly[ByteLane] = Fail - // If found, use "FinalRxEnCycle" as final RxEnDly value - // - // 5. Process the array of results and determine a pass-to-fail transition. - NumBLWithTargetFound = 0; - for (ByteLane = 0; ByteLane < MaxByteLanes; ByteLane++) { - if (RxEnDlyTargetFound[ByteLane] == FALSE) { - // Check if the current BL has found its target - if (ByteLanePass[ByteLane] == TRUE && ByteLaneFail[ByteLane] == TRUE) { - RxEnDlyTargetFound[ByteLane] = TRUE; - NumBLWithTargetFound++; - RxEnDlyTargetValue[ByteLane] = FinalRxEnCycle[ByteLane]; - } else { - RxEnDlyTargetFound[ByteLane] = FALSE; - } - } else { - // BL has already failed and passed, so increment both flags - NumBLWithTargetFound++; - } - } - IDS_HDT_CONSOLE (MEM_FLOW, "\n"); - // Check for exit condition - if (NumBLWithTargetFound == MaxByteLanes) { - // Exit condition found, so setting new RDQS based on RxEn-0x10 \n\n - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Setting new RDQS based on FinalRxEnCycle \n\n"); - // 5 A. DqsRcvEnCycle = the total delay value of the pass result. - // B. Program D18F2x9C_x0000_00[2A:10]_dct[1:0][DqsRcvEnGrossDelay, DqsRcvEnFineDelay] = - // DqsRcvEnCycle - 0x10. - NBPtr->RdDqsDlyRetrnStat = RDDQSDLY_RTN_NEEDED; - MemTRdPosRxEnSeedCheckRxEndly3 (TechPtr); - IDS_HDT_CONSOLE (MEM_FLOW, "\n"); - status = TRUE; - break; - } else { - status = FALSE; - } - } - // Check for exit condition - if (NumBLWithTargetFound == MaxByteLanes) { - status = TRUE; - break; - } else { - status = FALSE; - } - IDS_HDT_CONSOLE (MEM_FLOW, "\n"); - } - TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos] = EsbNoDqsPosSave; - if (i == MAX_POS_RX_EN_SEED_GROSS_RANGE) { - TechPtr->NBPtr->MCTPtr->ErrStatus[EsbNoDqsPos] = TRUE; - } - - // 6. Program D18F2x9C_x0D0F_0[F,8:0]30_dct[1:0][BlockRxDqsLock] = 0. - NBPtr->SetBitField (NBPtr, BFBlockRxDqsLock, 0); - IDS_HDT_CONSOLE (MEM_FLOW, "\nEnd HW RxEn Seedless training\n\n"); - return status; -} |