diff options
Diffstat (limited to 'src/vendorcode/amd')
25 files changed, 5834 insertions, 0 deletions
diff --git a/src/vendorcode/amd/cimx/Makefile.inc b/src/vendorcode/amd/cimx/Makefile.inc index 36223127ec..7051ea2330 100644 --- a/src/vendorcode/amd/cimx/Makefile.inc +++ b/src/vendorcode/amd/cimx/Makefile.inc @@ -1,3 +1,4 @@ +subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800) += sb800 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900) += sb900 subdirs-$(CONFIG_NORTHBRIDGE_AMD_CIMX_RD890) += rd890 diff --git a/src/vendorcode/amd/cimx/sb700/ACPILIB.c b/src/vendorcode/amd/cimx/sb700/ACPILIB.c new file mode 100644 index 0000000000..807b166146 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/ACPILIB.c @@ -0,0 +1,120 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +/*++ + +Routine Description: + + Locate ACPI table + +Arguments: + + Signature - table signature + +Returns: + + pointer to ACPI table + +--*/ +void* ACPI_LocateTable( + UINT32 Signature +) +{ + UINT32 i; + UINT32* RsdPtr = (UINT32*)0xe0000; + UINT32* Rsdt = NULL; + DESCRIPTION_HEADER* CurrentTable; + do{ +// if (*RsdPtr == ' DSR' && *(RsdPtr+1) == ' RTP'){ + if ((*RsdPtr == Int32FromChar ('R', 'S', 'D', ' ')) && (*(RsdPtr+1) == Int32FromChar ('R', 'T', 'P', ' '))){ + Rsdt = (UINT32*)((RSDP*)RsdPtr)->RsdtAddress; + break; + } + RsdPtr+=4; + }while (RsdPtr <= (UINT32*)0xffff0); + if(Rsdt != NULL && ACPI_GetTableChecksum(Rsdt)==0){ + for (i = 0;i < (((DESCRIPTION_HEADER*)Rsdt)->Length - sizeof(DESCRIPTION_HEADER))/4;i++){ + CurrentTable = (DESCRIPTION_HEADER*)*(UINT32*)((UINT8*)Rsdt + sizeof(DESCRIPTION_HEADER) + i*4); + if (CurrentTable->Signature == Signature) return CurrentTable; + } + } + return NULL; +} + +/*++ + +Routine Description: + + Update table checksum + +Arguments: + + TablePtr - table pointer + +Returns: + + none + +--*/ +void ACPI_SetTableChecksum( + void* TablePtr +) +{ + UINT8 Checksum = 0; + ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0; + Checksum = ACPI_GetTableChecksum(TablePtr); + ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0x100 - Checksum; +} + +/*++ + +Routine Description: + + Get table checksum + +Arguments: + + TablePtr - table pointer + +Returns: + + none + +--*/ +UINT8 ACPI_GetTableChecksum( + void* TablePtr +) +{ + return GetByteSum(TablePtr,((DESCRIPTION_HEADER*)TablePtr)->Length); +} + diff --git a/src/vendorcode/amd/cimx/sb700/ACPILIB.h b/src/vendorcode/amd/cimx/sb700/ACPILIB.h new file mode 100644 index 0000000000..5f2734fafd --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/ACPILIB.h @@ -0,0 +1,61 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_ACPILIB_H_ +#define _AMD_ACPILIB_H_ + +typedef struct _RSDP{ + UINT64 Signature; + UINT8 Checksum; + UINT8 OEMID[6]; + UINT8 Revision; + UINT32 RsdtAddress; + UINT32 Length; + UINT64 XsdtAddress; + UINT8 ExtendedChecksum; + UINT8 Reserved[3]; +}RSDP; + +typedef struct _DESCRIPTION_HEADER{ + UINT32 Signature; + UINT32 Length; + UINT8 Revision; + UINT8 Checksum; + UINT8 OEMID[6]; + UINT8 OEMTableID[8]; + UINT32 OEMRevision; + UINT32 CreatorID; + UINT32 CreatorRevision; +}DESCRIPTION_HEADER; + +void* ACPI_LocateTable(UINT32 Signature); +void ACPI_SetTableChecksum(void* TablePtr); +UINT8 ACPI_GetTableChecksum(void* TablePtr); + +#endif //ifndef _AMD_ACPILIB_H_ diff --git a/src/vendorcode/amd/cimx/sb700/AMDLIB.c b/src/vendorcode/amd/cimx/sb700/AMDLIB.c new file mode 100644 index 0000000000..b2332595f9 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/AMDLIB.c @@ -0,0 +1,434 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + + +#include "Platform.h" + +VOID +ReadIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + switch ( OpFlag ) { + case AccWidthUint8: + *(UINT8*)Value = ReadIo8 (Address); + break; + case AccWidthUint16: + *(UINT16*)Value = ReadIo16 (Address); + break; + case AccWidthUint32: + *(UINT32*)Value = ReadIo32 (Address); + break; + default: + break; + } +} + +VOID +WriteIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + switch ( OpFlag ) { + case AccWidthUint8: + WriteIo8 (Address, *(UINT8*)Value); + break; + case AccWidthUint16: + WriteIo16 (Address, *(UINT16*)Value); + break; + case AccWidthUint32: + WriteIo32 (Address, *(UINT32*)Value); + break; + default: + break; + } +} + +VOID +RWIO ( + IN UINT16 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data + ) +{ + UINT32 Result; + ReadIO (Address, OpFlag, &Result); + Result = (Result & Mask) | Data; + WriteIO (Address, OpFlag, &Result); +} + + +VOID +ReadPCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + + if ( (UINT16)Address < 0xff ) { + //Normal Config Access + UINT32 AddrCf8; + AddrCf8 = (1 << 31) + ((Address >> 8) & 0x0FFFF00) + (Address & 0xFC); + WriteIO (0xCf8, AccWidthUint32, &AddrCf8); + ReadIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); + } +} + +VOID +WritePCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN VOID* Value + ) +{ + OpFlag = OpFlag & 0x7f; + if ( (UINT16)Address < 0xff ) { + //Normal Config Access + UINT32 AddrCf8; + AddrCf8 = (1 << 31) + ((Address >> 8)&0x0FFFF00) + (Address & 0xFC); + WriteIO (0xCf8, AccWidthUint32, &AddrCf8); + WriteIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value); + } +} + +VOID +RWPCI ( + IN UINT32 Address, + IN UINT8 OpFlag, + IN UINT32 Mask, + IN UINT32 Data + ) +{ + UINT32 Result; + Result = 0; + OpFlag = OpFlag & 0x7f; + ReadPCI (Address, OpFlag, &Result); + Result = (Result & Mask) | Data; + WritePCI (Address, OpFlag, &Result); +} + +void +ReadIndexPCI32 ( +UINT32 PciAddress, +UINT32 IndexAddress, +void* Value +) +{ + WritePCI(PciAddress,AccWidthUint32,&IndexAddress); + ReadPCI(PciAddress+4,AccWidthUint32,Value); +} + +void +WriteIndexPCI32 ( +UINT32 PciAddress, +UINT32 IndexAddress, +UINT8 OpFlag, +void* Value +) +{ + + WritePCI(PciAddress,AccWidthUint32 | (OpFlag & 0x80),&IndexAddress); + WritePCI(PciAddress+4,AccWidthUint32 | (OpFlag & 0x80) ,Value); +} + +void +RWIndexPCI32 ( +UINT32 PciAddress, +UINT32 IndexAddress, +UINT8 OpFlag, +UINT32 Mask, +UINT32 Data +) +{ + UINT32 Result; + ReadIndexPCI32(PciAddress,IndexAddress,&Result); + Result = (Result & Mask)| Data; + WriteIndexPCI32(PciAddress,IndexAddress,(OpFlag & 0x80),&Result); + +} + +void +ReadMEM ( +UINT32 Address, +UINT8 OpFlag, +void* Value +) +{ + OpFlag = OpFlag & 0x7f; + switch (OpFlag){ + case AccWidthUint8 : *((UINT8*)Value)=*((UINT8*)Address);break; + case AccWidthUint16: *((UINT16*)Value)=*((UINT16*)Address);break; + case AccWidthUint32: *((UINT32*)Value)=*((UINT32*)Address);break; + } +} + +void +WriteMEM ( +UINT32 Address, +UINT8 OpFlag, +void* Value +) +{ + OpFlag = OpFlag & 0x7f; + switch (OpFlag){ + case AccWidthUint8 : *((UINT8*)Address)=*((UINT8*)Value);break; + case AccWidthUint16: *((UINT16*)Address)=*((UINT16*)Value);break; + case AccWidthUint32: *((UINT32*)Address)=*((UINT32*)Value);break; + } +} + +void +RWMEM ( +UINT32 Address, +UINT8 OpFlag, +UINT32 Mask, +UINT32 Data +) +{ + UINT32 Result; + ReadMEM(Address,OpFlag,&Result); + Result = (Result & Mask)| Data; + WriteMEM(Address,OpFlag,&Result); +} + + +void +RWMSR( +UINT32 Address, +UINT64 Mask, +UINT64 Value +) +{ + MsrWrite(Address,(MsrRead(Address)& Mask)|Value); +} + +UINT32 +IsFamily10() +{ + CPUID_DATA Cpuid; + CpuidRead(0x1,(CPUID_DATA *)&Cpuid); + + return Cpuid.REG_EAX & 0xff00000; +} + + +UINT8 GetNumberOfCpuCores(void) +{ + UINT8 Result=1; + Result=ReadNumberOfCpuCores(); + return Result; +} + + +void +Stall( +UINT32 uSec +) +{ + UINT16 timerAddr; + UINT32 startTime, elapsedTime; + ReadPMIO(SB_PMIO_REG24, AccWidthUint16, &timerAddr); + + if (timerAddr ==0){ + uSec = uSec/2; + while (uSec!=0){ + ReadIO(0x80,AccWidthUint8,(UINT8 *)(&startTime)); + uSec--; + } + } + else{ + ReadIO(timerAddr, AccWidthUint32,&startTime); + while (1){ + ReadIO(timerAddr, AccWidthUint32,&elapsedTime); + if (elapsedTime < startTime) + elapsedTime = elapsedTime+0xFFFFFFFF-startTime; + else + elapsedTime = elapsedTime-startTime; + if ((elapsedTime*28/100)>uSec) + break; + } + } +} + + +void +Reset( +) +{ + RWIO(0xcf9,AccWidthUint8,0x0,0x06); +} + + +CIM_STATUS +RWSMBUSBlock( +UINT8 Controller, +UINT8 Address, +UINT8 Offset, +UINT8 BufferSize, +UINT8* BufferPrt +) +{ + UINT16 SmbusPort; + UINT8 i; + UINT8 Status; + ReadPCI(PCI_ADDRESS(0,0x14,0,Controller?0x58:0x10),AccWidthUint16,&SmbusPort); + SmbusPort &= 0xfffe; + RWIO(SmbusPort + 0,AccWidthUint8,0x0,0xff); + RWIO(SmbusPort + 4,AccWidthUint8,0x0,Address); + RWIO(SmbusPort + 3,AccWidthUint8,0x0,Offset); + RWIO(SmbusPort + 2,AccWidthUint8,0x0,0x14); + RWIO(SmbusPort + 5,AccWidthUint8,0x0,BufferSize); + if(!(Address & 0x1)){ + for (i = 0 ;i < BufferSize;i++){ + WriteIO(SmbusPort + 7,AccWidthUint8,&BufferPrt[i]); + } + } + RWIO(SmbusPort + 2,AccWidthUint8,0x0,0x54); + do{ + ReadIO(SmbusPort + 0,AccWidthUint8,&Status); + if (Status & 0x1C) return CIM_ERROR; + if (Status & 0x02) break; + }while(!(Status & 0x1)); + + do{ + ReadIO(SmbusPort + 0,AccWidthUint8,&Status); + }while(Status & 0x1); + + if(Address & 0x1){ + for (i = 0 ;i < BufferSize;i++){ + ReadIO(SmbusPort + 7,AccWidthUint8,&BufferPrt[i]); + } + } + return CIM_SUCCESS; +} + + + +void outPort80(UINT32 pcode) +{ + WriteIO(0x80, AccWidthUint8, &pcode); + return; +} + + +UINT8 +GetByteSum( + void* pData, + UINT32 Length +) +{ + UINT32 i; + UINT8 Checksum = 0; + for (i = 0;i < Length;i++){ + Checksum += *((UINT8*)pData+i); + } + return Checksum; +} + + +UINT32 +readAlink( + UINT32 Index +){ + UINT32 Data; + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + ReadIO(ALINK_ACCESS_DATA, AccWidthUint32, &Data); + //Clear Index + Index=0; + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + return Data; +} + + +void +writeAlink( + UINT32 Index, + UINT32 Data +){ + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + WriteIO(ALINK_ACCESS_DATA, AccWidthUint32, &Data); + //Clear Index + Index=0; + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32, &Index); + +} + + +/** + * + * IsServer - Determine if southbridge type is SP5100 (server) or SB7x0 (non-server) + * + * A SP5100 is determined when both following two items are true: + * 1) Revision >= A14; + * 2) A server north bridge chipset is detected; + * + * A list of server north bridge chipset: + * + * Family DeviceID + * ---------------------- + * SR5690 0x5A10 + * SR5670 0x5A12 + * SR5650 0x5A13 + * + */ +UINT8 +IsServer (void){ + UINT16 DevID; + + if (getRevisionID () < SB700_A14) { + return 0; + } + ReadPCI ((NB_BDF << 16) + 2, AccWidthUint16, &DevID); + return ((DevID == 0x5a10) || (DevID == 0x5a12) || (DevID == 0x5a13))? 1: 0; +} + +/** + * + * IsLS2Mode - Determine if LS2 mode is enabled or not in northbridge. + * + */ +UINT8 +IsLs2Mode (void) +{ + UINT32 HT3LinkTraining0; + + ReadPCI ((NB_BDF << 16) + 0xAC, AccWidthUint32, &HT3LinkTraining0); + return ( HT3LinkTraining0 & 0x100 )? 1: 0; +} diff --git a/src/vendorcode/amd/cimx/sb700/AMDSBLIB.c b/src/vendorcode/amd/cimx/sb700/AMDSBLIB.c new file mode 100644 index 0000000000..bf4f06aad5 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/AMDSBLIB.c @@ -0,0 +1,276 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + + +void +ReadPMIO ( +UINT8 Address, +UINT8 OpFlag, +void* Value +) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i=0;i<=OpFlag;i++){ + WriteIO(0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + Address++; + ReadIO(0xCD7, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD7 + } +} + + +void +WritePMIO ( +UINT8 Address, +UINT8 OpFlag, +void* Value +) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i=0;i<=OpFlag;i++){ + WriteIO(0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + Address++; + WriteIO(0xCD7, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD7 + } +} + + +void +RWPMIO ( +UINT8 Address, +UINT8 OpFlag, +UINT32 AndMask, +UINT32 OrMask +) +{ + UINT32 Result; + + OpFlag = OpFlag & 0x7f; + ReadPMIO(Address,OpFlag,&Result); + Result = (Result & AndMask)| OrMask; + WritePMIO(Address,OpFlag,&Result); +} + + +void +ReadPMIO2 ( +UINT8 Address, +UINT8 OpFlag, +void* Value +) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i=0;i<=OpFlag;i++){ + WriteIO(0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 + Address++; + ReadIO(0xCD1, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD1 + } +} + + +void +WritePMIO2 ( +UINT8 Address, +UINT8 OpFlag, +void* Value +) +{ + UINT8 i; + + OpFlag = OpFlag & 0x7f; + if (OpFlag == 0x02) OpFlag = 0x03; + for (i=0;i<=OpFlag;i++){ + WriteIO(0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0 + Address++; + WriteIO(0xCD1, AccWidthUint8, (UINT8 *)Value+i); // SB_IOMAP_REGCD1 + } +} + + +void +RWPMIO2 ( +UINT8 Address, +UINT8 OpFlag, +UINT32 AndMask, +UINT32 OrMask +) +{ + UINT32 Result; + + OpFlag = OpFlag & 0x7f; + ReadPMIO2(Address,OpFlag,&Result); + Result = (Result & AndMask)| OrMask; + WritePMIO2(Address,OpFlag,&Result); +} + + +void +EnterEcConfig() +{ + UINT16 dwEcIndexPort; + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(UINT16)(BIT0); + RWIO(dwEcIndexPort, AccWidthUint8, 0x00, 0x5A); +} + +void +ExitEcConfig() +{ + UINT16 dwEcIndexPort; + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(UINT16)(BIT0); + RWIO(dwEcIndexPort, AccWidthUint8, 0x00, 0xA5); +} + + +void +ReadEC8 ( +UINT8 Address, +UINT8* Value +) +{ + UINT16 dwEcIndexPort; + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(UINT16)(BIT0); + WriteIO(dwEcIndexPort, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + ReadIO(dwEcIndexPort+1, AccWidthUint8, Value); // SB_IOMAP_REGCD7 +} + + +void +WriteEC8 ( +UINT8 Address, +UINT8* Value +) +{ + UINT16 dwEcIndexPort; + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort); + dwEcIndexPort &= ~(UINT16)(BIT0); + WriteIO(dwEcIndexPort, AccWidthUint8, &Address); // SB_IOMAP_REGCD6 + WriteIO(dwEcIndexPort+1, AccWidthUint8, Value); // SB_IOMAP_REGCD7 +} + + +void +RWEC8 ( +UINT8 Address, +UINT8 AndMask, +UINT8 OrMask +) +{ + UINT8 Result; + ReadEC8(Address,&Result); + Result = (Result & AndMask)| OrMask; + WriteEC8(Address, &Result); +} + + +void +programPciByteTable ( +REG8MASK* pPciByteTable, +UINT16 dwTableSize +) +{ + UINT8 i, dbBusNo, dbDevFnNo; + UINT32 ddBDFR; + + dbBusNo = pPciByteTable->bRegIndex; + dbDevFnNo = pPciByteTable->bANDMask; + pPciByteTable++; + for (i = 1; i < dwTableSize; i++){ + if ( (pPciByteTable->bRegIndex==0xFF) && (pPciByteTable->bANDMask==0xFF) && (pPciByteTable->bORMask==0xFF) ){ + pPciByteTable++; + dbBusNo = pPciByteTable->bRegIndex; + dbDevFnNo = pPciByteTable->bANDMask; + } + else{ + ddBDFR = (dbBusNo << 24) + (dbDevFnNo << 16) + (pPciByteTable->bRegIndex) ; + TRACE((DMSG_SB_TRACE, "PFA=%X AND=%X, OR=%X\n", ddBDFR, pPciByteTable->bANDMask, pPciByteTable->bORMask)); + RWPCI(ddBDFR, AccWidthUint8 | S3_SAVE, pPciByteTable->bANDMask, pPciByteTable->bORMask); + pPciByteTable++; + } + } +} + + +void +programPmioByteTable ( +REG8MASK* pPmioByteTable, +UINT16 dwTableSize +) +{ + UINT8 i; + for (i = 0; i < dwTableSize; i++){ + TRACE((DMSG_SB_TRACE, "PMIO Reg = %X AndMask = %X OrMask = %X\n",pPmioByteTable->bRegIndex,pPmioByteTable->bANDMask, pPmioByteTable->bORMask)); + RWPMIO(pPmioByteTable->bRegIndex, AccWidthUint8 , pPmioByteTable->bANDMask, pPmioByteTable->bORMask); + pPmioByteTable++; + } +} + + +UINT8 +getClockMode ( +void +) +{ + UINT8 dbTemp=0; + + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); + ReadPMIO(SB_PMIO_REGB0, AccWidthUint8, &dbTemp); + return(dbTemp&BIT4); +} + + +UINT16 +readStrapStatus ( +void +) +{ + UINT16 dwTemp=0; + + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); + ReadPMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTemp); + return(dwTemp); +} diff --git a/src/vendorcode/amd/cimx/sb700/AZALIA.c b/src/vendorcode/amd/cimx/sb700/AZALIA.c new file mode 100644 index 0000000000..cc72858521 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/AZALIA.c @@ -0,0 +1,304 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + + +#include "Platform.h" + +void configureAzaliaPinCmd (AMDSBCFG* pConfig, UINT32 ddBAR0, UINT8 dbChannelNum); +void configureAzaliaSetConfigD4Dword(CODECENTRY* tempAzaliaCodecEntryPtr, UINT32 ddChannelNum, UINT32 ddBAR0); + +//Pin Config for ALC880, ALC882 and ALC883: +CODECENTRY AzaliaCodecAlc882Table[] = { + {0x14, 0x01014010}, + {0x15, 0x01011012}, + {0x16, 0x01016011}, + {0x17, 0x01012014}, + {0x18, 0x01A19030}, + {0x19, 0x411111F0}, + {0x1a, 0x01813080}, + {0x1b, 0x411111F0}, + {0x1C, 0x411111F0}, + {0x1d, 0x411111F0}, + {0x1e, 0x01441150}, + {0x1f, 0x01C46160}, + {0xff, 0xffffffff} +}; + + +//Pin Config for ALC262 +CODECENTRY AzaliaCodecAlc262Table[] = { + {0x14, 0x01014010}, + {0x15, 0x411111F0}, + {0x16, 0x411111F0}, +// {0x17, 0x01012014}, + {0x18, 0x01A19830}, + {0x19, 0x02A19C40}, + {0x1a, 0x01813031}, + {0x1b, 0x02014C20}, + {0x1c, 0x411111F0}, + {0x1d, 0x411111F0}, + {0x1e, 0x0144111E}, + {0x1f, 0x01C46150}, + {0xff, 0xffffffff} +}; + +//Pin Config for ALC0861: +CODECENTRY AzaliaCodecAlc861Table[] = { + {0x01, 0x8086C601}, + {0x0B, 0x01014110}, + {0x0C, 0x01813140}, + {0x0D, 0x01A19941}, + {0x0E, 0x411111F0}, + {0x0F, 0x02214420}, + {0x10, 0x02A1994E}, + {0x11, 0x99330142}, + {0x12, 0x01451130}, + {0x1F, 0x411111F0}, + {0x20, 0x411111F0}, + {0x23, 0x411111F0}, + {0xff, 0xffffffff} +}; + +//Pin Config for ADI1984: +CODECENTRY AzaliaCodecAd1984Table[] = { + {0x11, 0x0221401F}, + {0x12, 0x90170110}, + {0x13, 0x511301F0}, + {0x14, 0x02A15020}, + {0x15, 0x50A301F0}, + {0x16, 0x593301F0}, + {0x17, 0x55A601F0}, + {0x18, 0x55A601F0}, + {0x1A, 0x91F311F0}, + {0x1B, 0x014511A0}, + {0x1C, 0x599301F0}, + {0xff, 0xffffffff} +}; + + +CODECENTRY FrontPanelAzaliaCodecTableList[] = { + {0x19, 0x02A19040}, + {0x1b, 0x02214020}, + {0xff, 0xffffffff} +}; + + +CODECTBLLIST azaliaCodecTableList[] = { + {0x010ec0880, &AzaliaCodecAlc882Table[0]}, + {0x010ec0882, &AzaliaCodecAlc882Table[0]}, + {0x010ec0883, &AzaliaCodecAlc882Table[0]}, + {0x010ec0885, &AzaliaCodecAlc882Table[0]}, + {0x010ec0262, &AzaliaCodecAlc262Table[0]}, + {0x010ec0861, &AzaliaCodecAlc861Table[0]}, + {0x011d41984, &AzaliaCodecAd1984Table[0]}, + {(UINT32)0x0FFFFFFFF, (CODECENTRY*)0xFFFFFFFF} +}; + + +/*------------------------------------------------------------------------------- +; Procedure: azaliaInitAfterPciEnum +; +; Description: This routine detects Azalia and, if present, initializes Azalia +; This routine is called from atiSbAfterPciInit +; +; +; Exit: None +; +; Modified: None +; +;----------------------------------------------------------------------------- +*/ +void azaliaInitAfterPciEnum (AMDSBCFG* pConfig){ + UINT8 i, dbEnableAzalia=0, dbPinRouting, dbChannelNum=0, dbTempVariable = 0; + UINT16 dwTempVariable = 0; + UINT32 ddBAR0, ddTempVariable = 0; + + if (pConfig->AzaliaController == 1) return; + + if (pConfig->AzaliaController != 1){ + RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT1, BIT1); + ReadPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG10, AccWidthUint32, &ddBAR0); + + if (ddBAR0 != 0){ //Keep the flag as disabled if BAR is 0 or all "F"s. + if (ddBAR0 != 0xFFFFFFFF){ + ddBAR0 &= ~(0x03FFF); + dbEnableAzalia = 1; + TRACE((DMSG_SB_TRACE, "CIMxSB - Enabling Azalia controller (BAR setup is ok) \n")); + } + } + } + + if (dbEnableAzalia){ //if Azalia is enabled + //Get SDIN Configuration + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGF8, AccWidthUint32 | S3_SAVE, 0, ddTempVariable); + ddTempVariable |= (pConfig->AzaliaSdin3 << 6); + ddTempVariable |= (pConfig->AzaliaSdin2 << 4); + ddTempVariable |= (pConfig->AzaliaSdin1 << 2); + ddTempVariable |= pConfig->AzaliaSdin0; + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, (ddTempVariable & 0xFF)); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+3, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), 0); + + i=11; + do{ + ReadMEM( ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + dbTempVariable |= BIT0; + WriteMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + Stall(1000); + ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + i--; + } while ( (!(dbTempVariable & BIT0)) && (i > 0) ); + + if (i==0){ + TRACE((DMSG_SB_TRACE, "CIMxSB - Problem in resetting Azalia controller\n")); + return; + } + + Stall(1000); + ReadMEM( ddBAR0+SB_AZ_BAR_REG0E, AccWidthUint16, &dwTempVariable); + if (dwTempVariable & 0x0F){ + TRACE((DMSG_SB_TRACE, "CIMxSB - Atleast One Azalia CODEC found \n")); + //atleast one azalia codec found + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8, &dbPinRouting); + do{ + if ( ( !(dbPinRouting & BIT0) ) && (dbPinRouting & BIT1) ) + configureAzaliaPinCmd(pConfig, ddBAR0, dbChannelNum); + dbPinRouting >>= 2; + dbChannelNum++; + } while (dbChannelNum != 4); + } + else{ + TRACE((DMSG_SB_TRACE, "CIMxSB - Azalia CODEC NOT found \n")); + //No Azalia codec found + if (pConfig->AzaliaController != 2) + dbEnableAzalia = 0; //set flag to disable Azalia + } + } + + if (dbEnableAzalia){ + //redo clear reset + do{ + dwTempVariable = 0; + WriteMEM( ddBAR0+SB_AZ_BAR_REG0C, AccWidthUint16 | S3_SAVE, &dwTempVariable); + ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + dbTempVariable &= ~(UINT8)(BIT0); + WriteMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + ReadMEM(ddBAR0+SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable); + } while (dbTempVariable & BIT0); + + if (pConfig->AzaliaSnoop == 1) + RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG42, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); + } + else{ + //disable Azalia controller + RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint16 | S3_SAVE, 0, 0); + RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, 0x55); + } +} + + +void configureAzaliaPinCmd (AMDSBCFG* pConfig, UINT32 ddBAR0, UINT8 dbChannelNum){ + UINT32 ddTempVariable, ddChannelNum; + CODECTBLLIST* ptempAzaliaOemCodecTablePtr; + CODECENTRY* tempAzaliaCodecEntryPtr; + + if ((pConfig->AzaliaPinCfg) != 1) + return; + + ddChannelNum = dbChannelNum << 28; + ddTempVariable = 0xF0000; + ddTempVariable |= ddChannelNum; + WriteMEM(ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddTempVariable); + Stall(60); + ReadMEM(ddBAR0 + SB_AZ_BAR_REG64, AccWidthUint32 | S3_SAVE, &ddTempVariable); + + if ( ((pConfig->pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) 0xFFFFFFFF)) ) + ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) FIXUP_PTR(&azaliaCodecTableList[0]); + else + ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) pConfig->pAzaliaOemCodecTablePtr; + + TRACE((DMSG_SB_TRACE, "CIMxSB - Azalia CODEC table pointer is %x \n", (UINT32)ptempAzaliaOemCodecTablePtr)); + + while ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF){ + if ( ptempAzaliaOemCodecTablePtr->CodecID == ddTempVariable) + break; + else + ++ptempAzaliaOemCodecTablePtr; + } + + if ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF){ + TRACE((DMSG_SB_TRACE, "CIMxSB - Matching CODEC ID found \n")); + tempAzaliaCodecEntryPtr = (CODECENTRY*) ptempAzaliaOemCodecTablePtr->CodecTablePtr; + TRACE((DMSG_SB_TRACE, "CIMxSB - Matching Azalia CODEC table pointer is %x \n", (UINT32)tempAzaliaCodecEntryPtr)); + + if ( ((pConfig->pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) 0xFFFFFFFF)) ) + tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR(tempAzaliaCodecEntryPtr); + + configureAzaliaSetConfigD4Dword(tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); + if (pConfig->AzaliaFrontPanel != 1){ + if ( (pConfig->AzaliaFrontPanel == 2) || (pConfig->FrontPanelDetected == 1) ){ + if ( ((pConfig->pAzaliaOemFpCodecTableptr) == NULL) || ((pConfig->pAzaliaOemFpCodecTableptr) == 0xFFFFFFFF)) + tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR(&FrontPanelAzaliaCodecTableList[0]); + else + tempAzaliaCodecEntryPtr = (CODECENTRY*) pConfig->pAzaliaOemFpCodecTableptr; + configureAzaliaSetConfigD4Dword(tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0); + } + } + } +} + + +void configureAzaliaSetConfigD4Dword(CODECENTRY* tempAzaliaCodecEntryPtr, UINT32 ddChannelNum, UINT32 ddBAR0){ + UINT8 dbtemp1,dbtemp2, i; + UINT32 ddtemp=0,ddtemp2=0; + + while ((tempAzaliaCodecEntryPtr->Nid) != 0xFF){ + dbtemp1=0x20; + if ((tempAzaliaCodecEntryPtr->Nid) == 0x1) + dbtemp1=0x24; + ddtemp = tempAzaliaCodecEntryPtr->Nid; + ddtemp &= 0xff; + ddtemp <<= 20; + ddtemp |= ddChannelNum; + ddtemp |= (0x700 << 8); + for(i=4; i>0; i--){ + do{ + ReadMEM(ddBAR0 + SB_AZ_BAR_REG68, AccWidthUint32, &ddtemp2); + } while (ddtemp2 & BIT0); + dbtemp2 = ( (tempAzaliaCodecEntryPtr->Byte40) >> ((4-i) * 8 ) ) & 0xff; + ddtemp = (ddtemp & 0xFFFF0000)+ ((dbtemp1 - i) << 8) + dbtemp2; + WriteMEM(ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddtemp); + Stall(60); + } + ++tempAzaliaCodecEntryPtr; + } +} + diff --git a/src/vendorcode/amd/cimx/sb700/DEBUG.c b/src/vendorcode/amd/cimx/sb700/DEBUG.c new file mode 100644 index 0000000000..f40682eac9 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/DEBUG.c @@ -0,0 +1,169 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +#define COM_BASE_ADDRESS 0x3f8 +#define DIVISOR 115200 +#define LF 0x0a +#define CR 0x0d + + +#ifdef CIM_DEBUG + #ifndef CIM_DEBUG_LEVEL + #define CIM_DEBUG_LEVEL 0xf +#endif + +void +TraceCode( UINT32 Level, UINT32 Code){ + + if (!(Level & CIM_DEBUG_LEVEL)){ + return; + } +#if CIM_DEBUG & 1 + if (Code != 0xFF){ + WriteIO(0x80,AccWidthUint8,&Code); + } +#endif + +} + + +void +TraceDebug( UINT32 Level, CHAR8 *Format, ...){ + CHAR8 temp[16]; + va_list ArgList; + + if (!(Level & CIM_DEBUG_LEVEL)){ + return; + } + +#if CIM_DEBUG & 2 + ArgList = va_start(ArgList,Format); + Format= (CHAR8*) FIXUP_PTR(Format); + while (1){ + if (*Format == 0) break; + if (*Format == '%'){ + int Radix = 0; + if(*(Format+1)=='s'||*(Format+1)=='S'){ + SendStringPort((CHAR8*) FIXUP_PTR(va_arg(ArgList,CHAR8*))); + Format+=2; + continue; + } + + if(*(Format+1)=='d'||*(Format+1)=='D'){ + Radix = 10; + } + if(*(Format+1)=='x'||*(Format+1)=='X'){ + Radix = 16; + } + if (Radix){ + ItoA(va_arg(ArgList,int),Radix,temp); + SendStringPort(temp); + Format+=2; + continue; + } + } + SendBytePort(*Format); + if(*(Format)==0x0a) SendBytePort(0x0d); + Format++; + } + va_end(ArgList); +#endif +} + + +void +ItoA( UINT32 Value, int Radix, char* pstr) +{ + char* tsptr = pstr; + char* rsptr = pstr; + char ch1,ch2; + unsigned int Reminder; +//Create String + do{ + Reminder = Value%Radix; + Value = Value/Radix; + if (Reminder<0xa) *tsptr=Reminder+'0'; + else *tsptr=Reminder-0xa+'a'; + tsptr++; + } while(Value); +//Reverse String + *tsptr = 0; + tsptr--; + while(tsptr>rsptr){ + ch1 = *tsptr; + ch2 = *rsptr; + *rsptr = ch1; + *tsptr = ch2; + tsptr--; + rsptr++; + } +} + +void +InitSerialOut(){ + UINT8 Data; + UINT16 Divisor; + Data = 0x87; + WriteIO(COM_BASE_ADDRESS + 0x3,AccWidthUint8, &Data); + Divisor = 115200 / DIVISOR; + Data = Divisor & 0xFF; + WriteIO(COM_BASE_ADDRESS + 0x00,AccWidthUint8, &Data); + Data = Divisor >> 8; + WriteIO(COM_BASE_ADDRESS + 0x01,AccWidthUint8, &Data); + Data = 0x07; + WriteIO(COM_BASE_ADDRESS + 0x3,AccWidthUint8, &Data); +} + + +void +SendStringPort(char* pstr){ + + while (*pstr!=0){ + SendBytePort(*pstr); + pstr++; + } +} + +void +SendBytePort(UINT8 Data) +{ + int Count = 80; + UINT8 Status; + do { + ReadIO((COM_BASE_ADDRESS + 0x05),AccWidthUint8, &Status); + if(Status == 0xff) break; + // Loop port is ready + } while ( (Status & 0x20) == 0 && (--Count) != 0); + WriteIO(COM_BASE_ADDRESS + 0x00,AccWidthUint8, &Data); +} +#endif diff --git a/src/vendorcode/amd/cimx/sb700/DISPATCHER.c b/src/vendorcode/amd/cimx/sb700/DISPATCHER.c new file mode 100644 index 0000000000..ae5f9b8365 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/DISPATCHER.c @@ -0,0 +1,208 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +void DispatcherEntry(void *pConfig){ + +#ifdef B1_IMAGE + void *pB2ImagePtr = NULL; + CIM_IMAGE_ENTRY pB2ImageEntry; +#endif + +//#if CIM_DEBUG +// InitSerialOut(); +//#endif + + TRACE((DMSG_SB_TRACE, "CIM - SB700 Entry\n")); + +#ifdef B1_IMAGE + if ((UINT32)(((STDCFG*)pConfig)->pB2ImageBase) != 0xffffffff){ + if (((STDCFG*)pConfig)->pB2ImageBase) + pB2ImagePtr = CheckImage('007S',(void*)((STDCFG*)pConfig)->pB2ImageBase); + if (pB2ImagePtr == NULL) + pB2ImagePtr = LocateImage('007S'); + if (pB2ImagePtr!=NULL){ + TRACE((DMSG_SB_TRACE, "CIM - SB700 Redirect to B2 Image\n")); + ((STDCFG*)pConfig)->pImageBase = (UINT32)pB2ImagePtr; + pB2ImageEntry = (CIM_IMAGE_ENTRY)(*((UINT32*)pB2ImagePtr+1) + (UINT32)pB2ImagePtr); + (*pB2ImageEntry)(pConfig); + return; + } + } +#endif + saveConfigPointer(pConfig); + + if (((STDCFG*)pConfig)->Func == SB_POWERON_INIT) + sbPowerOnInit((AMDSBCFG*)pConfig); + +#ifndef B1_IMAGE + if (((STDCFG*)pConfig)->Func == SB_BEFORE_PCI_INIT) + sbBeforePciInit((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_AFTER_PCI_INIT) + sbAfterPciInit((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_LATE_POST_INIT) + sbLatePost((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT) + sbBeforePciRestoreInit((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT) + sbAfterPciRestoreInit((AMDSBCFG*)pConfig); + if (((STDCFG*)pConfig)->Func == SB_SMM_SERVICE) + { + // sbSmmService((AMDSBCFG*)pConfig); + } + if (((STDCFG*)pConfig)->Func == SB_SMM_ACPION) + sbSmmAcpiOn((AMDSBCFG*)pConfig); +#endif + TRACE((DMSG_SB_TRACE, "CIMx - SB Exit\n")); +} + + +void* LocateImage(UINT32 Signature){ + void *Result; + UINT8 *ImagePtr = (UINT8*)(0xffffffff - (IMAGE_ALIGN-1)); + while ((UINT32)ImagePtr>=(0xfffffff - (NUM_IMAGE_LOCATION*IMAGE_ALIGN -1))){ + Result = CheckImage(Signature,(void*)ImagePtr); + if (Result != NULL) + return Result; + ImagePtr -= IMAGE_ALIGN; + } + return NULL; +} + + +void* CheckImage(UINT32 Signature, void* ImagePtr){ + UINT8 *TempImagePtr; + UINT8 Sum = 0; + UINT32 i; +// if ((*((UINT32*)ImagePtr) == 'ITA$' && ((CIMFILEHEADER*)ImagePtr)->ModuleLogo == Signature)){ + if ((*((UINT32*)ImagePtr) == Int32FromChar ('$', 'A', 'T', 'I')) && (((CIMFILEHEADER*)ImagePtr)->ModuleLogo == Signature)){ + //GetImage Image size + TempImagePtr = (UINT8*)ImagePtr; + for (i=0;i<(((CIMFILEHEADER*)ImagePtr)->ImageSize);i++){ + Sum += *TempImagePtr; + TempImagePtr++; + } + if (Sum == 0) + return ImagePtr; + } + return NULL; +} + + +UINT32 GetPciebase(){ + AMDSBCFG* Result; + Result = getConfigPointer(); + return Result->StdHeader.pPcieBase; +} + + +void saveConfigPointer(AMDSBCFG* pConfig){ + UINT8 dbReg, i; + UINT32 ddValue; + + ddValue = ((UINT32) pConfig); + dbReg = SB_ECMOS_REG08; + + for (i=0; i<=3; i++){ + WriteIO(SB_IOMAP_REG72, AccWidthUint8, &dbReg); + WriteIO(SB_IOMAP_REG73, AccWidthUint8, (UINT8 *)&ddValue); + ddValue >>= 8; + dbReg++; + } +} + + +AMDSBCFG* getConfigPointer(){ + UINT8 dbReg, dbValue, i; + UINT32 ddValue=0; + + dbReg = SB_ECMOS_REG08; + for (i=0; i<=3; i++){ + WriteIO(SB_IOMAP_REG72, AccWidthUint8, &dbReg); + ReadIO(SB_IOMAP_REG73, AccWidthUint8, &dbValue); + ddValue |= (dbValue<<(i*8)); + dbReg++; + } + return( (AMDSBCFG*) ddValue); +} + +/** + * AmdSbDispatcher - Dispatch Southbridge function + * + * + * + * @param[in] pConfig Southbridge configuration structure pointer. + * + */ +AGESA_STATUS +AmdSbDispatcher ( + IN VOID *pConfig + ) +{ + AGESA_STATUS Status = AGESA_SUCCESS; + + saveConfigPointer (pConfig); + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_POWERON_INIT ) { + sbPowerOnInit ((AMDSBCFG*) pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_INIT ) { + sbBeforePciInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_INIT ) { + sbAfterPciInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_LATE_POST_INIT ) { + sbLatePost ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT ) { + sbBeforePciRestoreInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT ) { + sbAfterPciRestoreInit ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_SERVICE ) { + sbSmmService ((AMDSBCFG*)pConfig); + } + + if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_ACPION ) { + sbSmmAcpiOn ((AMDSBCFG*)pConfig); + } + + return Status; +} diff --git a/src/vendorcode/amd/cimx/sb700/EC.c b/src/vendorcode/amd/cimx/sb700/EC.c new file mode 100644 index 0000000000..3ad15e1146 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/EC.c @@ -0,0 +1,132 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +#ifndef NO_EC_SUPPORT + +REG8MASK sb710PorInitPciTable[] = { + // SMBUS Device(Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make some hidden registers of smbus visible. + {SB_SMBUS_REG38, (UINT8)~(BIT7+BIT5+BIT4+BIT3+BIT2+BIT1), 0x0D}, + {SB_SMBUS_REG38+1, ~(UINT8)(BIT2+BIT1), BIT3 }, + {SB_SMBUS_REGE1, 0xFF, BIT1}, + {SB_SMBUS_REG43, 0xFF, BIT3}, //Make some hidden registers of smbus invisible. + {0xFF, 0xFF, 0xFF}, + + // LPC Device(Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REGB8+3, ~(UINT8)(BIT1), BIT7+BIT2}, + {0xFF, 0xFF, 0xFF}, +}; + +REG8MASK sb710PorPmioInitTbl[]={ + // index andmask ormask + {SB_PMIO_REGD7, 0xFF, BIT5}, + {SB_PMIO_REGBB, 0xFF, BIT5}, +}; + + +void ecPowerOnInit(BUILDPARAM *pBuildOptPtr, AMDSBCFG* pConfig){ + UINT8 dbVar0, i=0; + + if (!(isEcPresent())) + return; //return if EC is not enabled + + for(i=0;i<0xFF;i++){ + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG40, AccWidthUint8 | S3_SAVE, &dbVar0); + if ( dbVar0 & BIT7 ) break; //break if EC is ready + Stall(500); //wait for EC to become ready + } + + if (getRevisionID() >= SB700_A14){ + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sb710PorInitPciTable[0]), sizeof(sb710PorInitPciTable)/sizeof(REG8MASK) ); + programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sb710PorPmioInitTbl[0]), (sizeof(sb710PorPmioInitTbl)/sizeof(REG8MASK)) ); + } + + RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBA), AccWidthUint8 | S3_SAVE, 0xFF, BIT2); //Enable SPI Prefetch in EC + + //Enable config mode + EnterEcConfig(); + + //Do settings for mailbox - logical device 0x09 + RWEC8(0x07, 0x00, 0x09); //switch to device 9 (Mailbox) + RWEC8(0x60, 0x00, (pBuildOptPtr->EcLdn9MailBoxAddr >> 8)); //set MSB of Mailbox port + RWEC8(0x61, 0x00, (pBuildOptPtr->EcLdn9MailBoxAddr & 0xFF)); //set LSB of Mailbox port + RWEC8(0x30, 0x00, 0x01); //;Enable Mailbox Registers Interface, bit0=1 + + if (pBuildOptPtr->EcKbd == CIMX_OPTION_ENABLED){ + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+3), AccWidthUint8 | S3_SAVE, 0xFF, BIT7+BIT3); + //Enable KBRST#, IRQ1 & IRQ12, GateA20 Function signal from IMC + RWPMIO(SB_PMIO_REGBB, AccWidthUint8, 0xFF, BIT3+BIT2+BIT1+BIT0); + //Disable LPC Decoding of port 60/64 + RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG47), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT5, 0); + //Enable logical device 0x07 (Keyboard controller) + RWEC8(0x07, 0x00, 0x07); + RWEC8(0x30, 0x00, 0x01); + } + + if (pBuildOptPtr->EcChannel0 == CIMX_OPTION_ENABLED){ + //Logical device 0x08 + RWEC8(0x07, 0x00, 0x08); + RWEC8(0x60, 0x00, 0x00); + RWEC8(0x61, 0x00, 0x62); + RWEC8(0x30, 0x00, 0x01); //;Enable Device 8 + } + //Logical device 0x05 + RWEC8(0x07, 0x00, 0x05); //Select logical device 05, IR controller + RWEC8(0x60, 0x00, pBuildOptPtr->EcLdn5MailBoxAddr >> 8); + RWEC8(0x61, 0x00, (pBuildOptPtr->EcLdn5MailBoxAddr & 0xFF)); + RWEC8(0x70, 0xF0, (pBuildOptPtr->EcLdn5Irq)); //Set IRQ to 05h + RWEC8(0x30, 0x00, 0x01); //Enable logical device 5, IR controller + + RWPMIO(SB_PMIO_REGBB, AccWidthUint8, 0xFF, BIT4); //Enable EC(IMC) to generate SMI to BIOS + ExitEcConfig(); +} + + +void ecInitBeforePciEnum(AMDSBCFG* pConfig){ + if (!(isEcPresent())) + return; //return if EC is not enabled +} + + +void ecInitLatePost(AMDSBCFG* pConfig){ + if (!(isEcPresent()) ) + return; //return if EC is not enabled + //Enable config mode + EnterEcConfig(); //Enable config mode + //for future use + ExitEcConfig(); +} + +#endif diff --git a/src/vendorcode/amd/cimx/sb700/FLASH.c b/src/vendorcode/amd/cimx/sb700/FLASH.c new file mode 100644 index 0000000000..0d842453cc --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/FLASH.c @@ -0,0 +1,58 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +void fcInitBeforePciEnum(AMDSBCFG* pConfig){ + + TRACE((DMSG_SB_TRACE, "Entering PreInit Flash \n")); + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)BIT1, 00); + + //Enable IDE and disable flash + //Enable IDE and disable flash + RWPMIO(SB_PMIO_REG59, AccWidthUint8, ~(UINT32)(BIT1+BIT0), 0); + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)(BIT3), BIT0); //Configure GPIO3 as IDE_RST# and release RST + if (pConfig->IdeController){ + //Disabling IDE controller + RWPCI((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG04, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), 0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAE, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + } + else{ + //Enable IDE controller + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAE, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT3), 0); + } + + //RPR 8.2 Enable IDE Data bus DD7 Pull down Resistor if IDE is enabled and FC is disabled + RWPMIO2(SB_PMIO2_REGE5, AccWidthUint8, 0xFF, BIT2); + //Slowdown the clock to FC if FC is not enabled, this is a power savings feature + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)(BIT4), BIT4); + RWPMIO(SB_PMIO_REGBC, AccWidthUint8, 0xC0, 0); +} diff --git a/src/vendorcode/amd/cimx/sb700/LEGACY.c b/src/vendorcode/amd/cimx/sb700/LEGACY.c new file mode 100644 index 0000000000..c904d595d2 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/LEGACY.c @@ -0,0 +1,38 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +UINT32 GetFixUp(){ + STDCFG* Result; + Result = (STDCFG*) getConfigPointer(); + return Result->pImageBase; +} diff --git a/src/vendorcode/amd/cimx/sb700/Makefile.inc b/src/vendorcode/amd/cimx/sb700/Makefile.inc new file mode 100644 index 0000000000..89541337cf --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/Makefile.inc @@ -0,0 +1,77 @@ +#***************************************************************************** +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of Advanced Micro Devices, Inc. nor the names of +# its contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +#***************************************************************************** + +# CIMX Root directory +CIMX_ROOT = $(src)/vendorcode/amd/cimx + +SB_CIMX_INC = -I$(src)/mainboard/$(MAINBOARDDIR) +SB_CIMX_INC += -I$(src)/southbridge/amd/cimx/sb700 +SB_CIMX_INC += -I$(CIMX_ROOT)/sb700 + +romstage-y += ACPILIB.c +romstage-y += AMDLIB.c +romstage-y += AMDSBLIB.c +romstage-y += AZALIA.c +romstage-y += DEBUG.c +romstage-y += DISPATCHER.c +romstage-y += EC.c +romstage-y += FLASH.c +romstage-y += SATA.c +romstage-y += SBCMN.c +romstage-y += SBCMNLIB.c +romstage-y += SBMAIN.c +romstage-y += SBPOR.c +romstage-y += SMM.c +romstage-y += USB.c + +ramstage-y += ACPILIB.c +ramstage-y += AMDLIB.c +ramstage-y += AMDSBLIB.c +ramstage-y += AZALIA.c +ramstage-y += DEBUG.c +ramstage-y += DISPATCHER.c +ramstage-y += EC.c +ramstage-y += FLASH.c +ramstage-y += SATA.c +ramstage-y += SBCMN.c +ramstage-y += SBCMNLIB.c +ramstage-y += SBMAIN.c +ramstage-y += SBPOR.c +ramstage-y += SMM.c +ramstage-y += USB.c +ramstage-y += LEGACY.c + +SB_CIMX_CFLAGS = +export CIMX_ROOT +export SB_CIMX_INC +export SB_CIMX_CFLAGS +CC := $(CC) $(SB_CIMX_CFLAGS) $(SB_CIMX_INC) + +####################################################################### + diff --git a/src/vendorcode/amd/cimx/sb700/OEM.h b/src/vendorcode/amd/cimx/sb700/OEM.h new file mode 100644 index 0000000000..74604c0280 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/OEM.h @@ -0,0 +1,87 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ +#ifndef _AMD_SB_CIMx_OEM_H_ +#define _AMD_SB_CIMx_OEM_H_ + +#define BIOS_SIZE 0x04 //04 - 1MB +#define LEGACY_FREE 0x00 + +/** + * PCIEX_BASE_ADDRESS - Define PCIE base address + * + * @param[Option] MOVE_PCIEBAR_TO_F0000000 Set PCIe base address to 0xF7000000 + */ +#ifdef MOVE_PCIEBAR_TO_F0000000 + #define PCIEX_BASE_ADDRESS 0xF7000000 +#else + #define PCIEX_BASE_ADDRESS 0xE0000000 +#endif + + +#define SMBUS0_BASE_ADDRESS 0xB00 +#define SMBUS1_BASE_ADDRESS 0xB20 +#define SIO_PME_BASE_ADDRESS 0xE00 +#define SPI_BASE_ADDRESS 0xFEC10000 + +#define WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 // Watchdog Timer Base Address +#define HPET_BASE_ADDRESS 0xFED00000 // HPET Base address + +#define PM1_EVT_BLK_ADDRESS 0x800 // AcpiPm1EvtBlkAddr; +#define PM1_CNT_BLK_ADDRESS 0x804 // AcpiPm1CntBlkAddr; +#define PM1_TMR_BLK_ADDRESS 0x808 // AcpiPmTmrBlkAddr; +#define CPU_CNT_BLK_ADDRESS 0x810 // CpuControlBlkAddr; +#define GPE0_BLK_ADDRESS 0x820 // AcpiGpe0BlkAddr; +#define SMI_CMD_PORT 0xB0 // SmiCmdPortAddr; +#define ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 // AcpiPmaCntBlkAddr; + +#define EC_LDN5_MAILBOX_ADDRESS 0x550 +#define EC_LDN5_IRQ 0x05 +#define EC_LDN9_MAILBOX_ADDRESS 0x3E + +#define SATA_IDE_MODE_SSID 0x43901002 +#define SATA_RAID_MODE_SSID 0x43921002 +#define SATA_RAID5_MODE_SSID 0x43931002 +#define SATA_AHCI_SSID 0x43911002 +#define OHCI0_SSID 0x43971002 +#define OHCI1_SSID 0x43981002 +#define EHCI0_SSID 0x43961002 +#define OHCI2_SSID 0x43971002 +#define OHCI3_SSID 0x43981002 +#define EHCI1_SSID 0x43961002 +#define OHCI4_SSID 0x43991002 + +#define SMBUS_SSID 0x43851002 +#define IDE_SSID 0x439C1002 +#define AZALIA_SSID 0x43831002 +#define LPC_SSID 0x439D1002 +#define P2P_SSID 0x43841002 + +#define RESERVED_VALUE 0x00 + +#endif //ifndef _AMD_SB_CIMx_OEM_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SATA.c b/src/vendorcode/amd/cimx/sb700/SATA.c new file mode 100644 index 0000000000..09d49237ea --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SATA.c @@ -0,0 +1,453 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +//Table for class code of SATA Controller in different modes +UINT32 sataIfCodeTable[] = { + 0x01018f00, //sata class ID of IDE + 0x01040000, //sata class ID of RAID + 0x01060100, //sata class ID of AHCI + 0x01018a00, //sata class ID of Legacy IDE + 0x01018f00, //sata class ID of IDE to AHCI mode + 0x01060100, //sata class ID of AMD-AHCI mode + 0x01018f00 //sata class ID of IDE to AMD-AHCI mode +}; + +//Table for device id of SATA Controller in different modes +UINT16 sataDeviceIDTable[] = { + 0x4390, //sata device ID of IDE + 0x4392, //sata device ID of RAID + 0x4391, //sata class ID of AHCI + 0x4390, //sata device ID of Legacy IDE + 0x4390, //sata device ID of IDE->AHCI mode + 0x4394, //sata device ID for AMD-AHCI mode + 0x4390 //sata device ID of IDE->AMDAHCI mode +}; + + +void sataInitBeforePciEnum(AMDSBCFG* pConfig){ + UINT32 ddValue, *tempptr; + UINT16 *pDeviceIdptr, dwDeviceId; + UINT8 dbValue, dbOrMask, dbAndMask; + + + dbAndMask=0; + dbOrMask=0; + // Enable/Disable Combined mode & do primary/secondary selections, enable/disable + if (pConfig->SataIdeCombinedMode == CIMX_OPTION_DISABLED) dbAndMask= BIT3; //Clear BIT3 + if (pConfig->SataIdeCombMdPriSecOpt == 1) dbOrMask = BIT4; //Set BIT4 + if (pConfig->SataSmbus == 0) dbOrMask = BIT1; + + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAD), AccWidthUint8 | S3_SAVE, ~(dbAndMask), dbOrMask); + + if (pConfig->SataController == 0){ + // SATA Controller Disabled & set Power Saving mode to disabled + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGAD), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, BIT1); + return; + } + + restrictSataCapabilities(pConfig); + + // Get the appropriate class code from the table and write it to PCI register 08h-0Bh + // Set the appropriate SATA class based on the input parameters + dbValue=pConfig->SataClass; + tempptr= (UINT32 *) FIXUP_PTR (&sataIfCodeTable[0]); + ddValue=tempptr[dbValue]; + + // BIT0: Enable write access to PCI header (reg 08h-0Bh) by setting SATA PCI register 40h, bit 0 + // BIT4:disable fast boot + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT4+BIT0); + + // Write the class code to SATA PCI register 08h-0Bh + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); + + if (pConfig->SataClass == LEGACY_IDE_MODE) //SATA = Legacy IDE + //Set PATA controller to native mode + RWPCI(((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG09), AccWidthUint8 | S3_SAVE, 0x00, 0x08F); + + //Change the appropriate device id + if (pConfig->SataClass == AMD_AHCI_MODE) { + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 3), AccWidthUint8 | S3_SAVE, 0xff, BIT0); + } + pDeviceIdptr= (UINT16 *) FIXUP_PTR (&sataDeviceIDTable[0]); + + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwDeviceId); + if ( !((dwDeviceId==SB750_SATA_DEFAULT_DEVICE_ID) && (pConfig->SataClass == RAID_MODE)) ){ + //if not (SB750 & RAID mode), then program the device id + dwDeviceId=pDeviceIdptr[dbValue]; + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, dwDeviceId); + } + + if (pConfig->AcpiS1Supported) + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG34), AccWidthUint8 | S3_SAVE, 00, 0x70);//Disable SATA PM & MSI capability + else + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG60+1), AccWidthUint8 | S3_SAVE, 00, 0x70);//Disable SATA MSI capability + + if (getRevisionID() >= SB700_A13){ + //Enable test/enhancement mode for A13 + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+3), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT5, 00); + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG48), AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT24+BIT21), 0xBF80); + } + + if (getRevisionID() >= SB700_A14){ + //Fix for TT SB01352 - LED Stays On When ODD Attached To Slave Port In IDE Mode + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG48), AccWidthUint8 | S3_SAVE, 0xFF, BIT6); + } + + // Disable write access to PCI header + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); + + // RPR 6.5 SATA PHY Programming Sequence + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG86, AccWidthUint16 | S3_SAVE, 0x00, 0x2C00); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG88, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG8C, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG90, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG94, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG98, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG9C, AccWidthUint32 | S3_SAVE, 0x00, 0x01B48016); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA0, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA4, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REGA8, AccWidthUint32 | S3_SAVE, 0x00, 0xA07AA07A); + + CallBackToOEM(SATA_PHY_PROGRAMMING, NULL, pConfig); +} + +void sataInitAfterPciEnum(AMDSBCFG* pConfig){ + UINT32 ddAndMask=0, ddOrMask=0, ddBar5=0; + UINT8 dbVar, dbPortNum; + + if (pConfig->SataController == 0) return; //return if SATA controller is disabled. + + //Enable write access to pci header, pm capabilities + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + + //Disable AHCI enhancement function (RPR 7.2) + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0xFF, BIT7); + + restrictSataCapabilities(pConfig); + + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + + if ( (ddBar5 == 0) || (ddBar5 == -1) ) { + //assign temporary BAR5 + if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == -1)) + ddBar5 = 0xFEC01000; + else + ddBar5=pConfig->TempMMIO; + + WritePCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + } + + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + RWPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8,0xFF, 0x03); //memory and io access enable + + ddBar5 &= 0xFFFFFC00; //Clear Bits 9:0 + if (!pConfig->SataPortMultCap) + ddAndMask |= BIT12; + if (!pConfig->SataAggrLinkPmCap) + ddAndMask |= BIT11; + if (pConfig->SataSscPscCap) + ddOrMask |= BIT1; + + RWMEM((ddBar5 + SB_SATA_BAR5_REGFC),AccWidthUint32 | S3_SAVE, ~ddAndMask, ddOrMask); + + + //Clear HPCP and ESP by default + RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, 0xFFFC0FC0, 0); + + if (pConfig->SataHpcpButNonESP !=0) { + RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, 0xFFFFFFC0, pConfig->SataHpcpButNonESP); + } + + // SATA ESP port setting + // These config bits are set for SATA driver to identify which ports are external SATA ports and need to + // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will + // not enable power management(HIPM & DIPM) for these ports. + if (pConfig->SataEspPort !=0) { + RWMEM((ddBar5 + SB_SATA_BAR5_REGFC),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT20); + RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, ~(pConfig->SataEspPort), 0); + RWMEM((ddBar5 + SB_SATA_BAR5_REGF8),AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT17+BIT16+BIT15+BIT14+BIT13+BIT12),(pConfig->SataEspPort << 12)); + } + + if ( ((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE) ) + RWPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50+2), AccWidthUint8, ~(UINT32)(BIT3+BIT2+BIT1), BIT2+BIT1); //set MSI to 8 messages + + if ( ((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE) && ((pConfig->SataIdeCombinedMode) == CIMX_OPTION_DISABLED) ){ + RWMEM((ddBar5 + SB_SATA_BAR5_REG00),AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT2+BIT1+BIT0), BIT2+BIT0); + RWMEM((ddBar5 + SB_SATA_BAR5_REG0C),AccWidthUint8 | S3_SAVE, 0xC0, 0x3F); + } + + for (dbPortNum=0;dbPortNum<=5;dbPortNum++){ + if (pConfig->SataPortMode & (1 << dbPortNum)){ + //downgrade to GEN1 + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x10); + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); + Stall(1000); + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); + } + } + + //If this is not S3 resume and also if SATA set to one of IDE mode, then implement drive detection workaround. + if ( !(pConfig->S3Resume) && ( ((pConfig->SataClass) != AHCI_MODE) && ((pConfig->SataClass) != RAID_MODE) && ((pConfig->SataClass) != AMD_AHCI_MODE) ) ) + sataDriveDetection(pConfig, ddBar5); + + if ( (pConfig->SataPhyWorkaround==1) || ( (pConfig->SataPhyWorkaround==0) && (getRevisionID() < SB700_A13)) ) + sataPhyWorkaround(pConfig, ddBar5); + + // Set the handshake bit for IDE driver to detect the disabled IDE channel correctly. + // Set IDE PCI Config 0x63 [3] if primary channel disabled, [4] if secondary channel disabled. + if (pConfig->SataIdeCombinedMode == CIMX_OPTION_DISABLED) + RWPCI( ((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG63), AccWidthUint8 , 0xF9, (0x02 << (pConfig->SataIdeCombMdPriSecOpt)) ); + + WritePCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + + //Disable write access to pci header, pm capabilities + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); +} + + +void sataDriveDetection(AMDSBCFG* pConfig, UINT32 ddBar5){ + UINT32 ddVar0; + UINT8 dbPortNum, dbVar0; + UINT16 dwIoBase, dwVar0; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering sata drive detection procedure\n\n")); + TRACE((DMSG_SB_TRACE, "SATA BAR5 is %X \n", ddBar5)); + + if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) ){ + for (dbPortNum=0;dbPortNum<4;dbPortNum++){ + ReadMEM(ddBar5+ SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint32, &ddVar0); + if ( ( ddVar0 & 0x0F ) == 0x03){ + if ( dbPortNum & BIT0) + //this port belongs to secondary channel + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG18), AccWidthUint16, &dwIoBase); + else + //this port belongs to primary channel + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG10), AccWidthUint16, &dwIoBase); + + //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them + if (pConfig->SataClass == LEGACY_IDE_MODE) + dwIoBase = ( (0x170) | ( (~((dbPortNum & BIT0) << 7)) & 0x80 ) ); + + if ( dbPortNum & BIT1) + //this port is slave + dbVar0=0xB0; + else + //this port is master + dbVar0=0xA0; + dwIoBase &= 0xFFF8; + WriteIO(dwIoBase+6, AccWidthUint8, &dbVar0); + + //Wait in loop for 30s for the drive to become ready + for (dwVar0=0;dwVar0<3000;dwVar0++){ + ReadIO(dwIoBase+7, AccWidthUint8, &dbVar0); + if ( (dbVar0 & 0x88) == 0) + break; + Stall(10000); + } + } //end of if ( ( ddVar0 & 0x0F ) == 0x03) + } //for (dbPortNum=0;dbPortNum<4;dbPortNum++) + } //if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) ) +} + + +//This patch is to workaround the SATA PHY logic hardware issue in the SB700. +//Internally this workaround is called as 7NewA +void sataPhyWorkaround(AMDSBCFG* pConfig, UINT32 ddBar5){ + + UINT8 dbPortNum, dbVar0; + + if (pConfig->Gen1DeviceShutdownDuringPhyWrknd == 0x01){ + for (dbPortNum=0;dbPortNum<=5;dbPortNum++){ + ReadMEM(ddBar5+ SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint8, &dbVar0); + if ( (dbVar0 & 0xF0) == 0x10){ + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+2, AccWidthUint8 | S3_SAVE, 0xFF, (01 << dbPortNum)); + } + + } + } + + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)(BIT4+BIT3), BIT4+BIT3);//set PMIO_D0[4:3] = 11b // this is to tell SATA PHY to use the internal 100MHz clock + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG86, AccWidthUint8 | S3_SAVE, 0x00, 0x40);// set SATA PCI_CFG 0x86[7:0] = 0x40 //after the reset is done, perform this to turn on the diff clock path into SATA PHY + Stall(2000);// Wait for 2ms + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)(BIT4+BIT3), 00);//13. set PMIO_D0[4:3] = 00b + Stall(20000);// Wait 20ms + forceOOB(ddBar5);// Force OOB + + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40+2, AccWidthUint8 | S3_SAVE, ~(0x03F), 00); +} + + +void forceOOB(UINT32 ddBar5){ + UINT8 dbPortNum; + for (dbPortNum=0;dbPortNum<=5;dbPortNum++) + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); + Stall(2000); + for (dbPortNum=0;dbPortNum<=5;dbPortNum++) + RWMEM(ddBar5+ SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); + Stall(2000);// Wait for 2ms +} + +/*++ + +Routine Description: + + SATA Late Configuration + + if the mode is selected as IDE->AHCI + { 1. Set class ID to AHCI + 2. Enable AHCI interrupt + } + +Arguments: + + pConfig - SBconfiguration + +Returns: + + void + +--*/ +void sataInitLatePost(AMDSBCFG* pConfig){ + UINT32 ddBar5; + UINT8 dbVar; + + //Return immediately is sata controller is not enabled + if (pConfig->SataController == 0) return; + + restrictSataCapabilities(pConfig); + + //Get BAR5 value + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + + //Assign temporary BAR if is not already assigned + if ( (ddBar5 == 0) || (ddBar5 == -1) ){ + //assign temporary BAR5 + if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == -1)) + ddBar5 = 0xFEC01000; + else + ddBar5=pConfig->TempMMIO; + WritePCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + } + + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); + //Enable memory and io access + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, 0xFF, 0x03); + //Enable write access to pci header, pm capabilities + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); + + shutdownUnconnectedSataPortClock(pConfig, ddBar5); + + if ( (pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE)){ + //program the AHCI class code + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, 0x01060100); + //Set interrupt enable bit + RWMEM((ddBar5 + 0x04),AccWidthUint8,~(UINT32)0,BIT1); + //program the correct device id for AHCI mode + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4391); + + if (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE) + //program the correct device id for AMD-AHCI mode + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 3), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + } + + //Disable write access to pci header and pm capabilities + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); + //Clear error status + RWMEM((ddBar5 + SB_SATA_BAR5_REG130),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM((ddBar5 + SB_SATA_BAR5_REG1B0),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM((ddBar5 + SB_SATA_BAR5_REG230),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + RWMEM((ddBar5 + SB_SATA_BAR5_REG2B0),AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); + //Restore memory and io access bits + WritePCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar ); +} + + +void shutdownUnconnectedSataPortClock(AMDSBCFG* pConfig, UINT32 ddBar5){ + UINT8 dbPortNum, dbPortSataStatus, NumOfPorts=0; + UINT8 UnusedPortBitMap; + UINT8 SataType; + UINT8 ClockOffEnabled ; + + UnusedPortBitMap = 0; + + // First scan for all unused SATA ports + for (dbPortNum = 5; dbPortNum <= 5; dbPortNum--) { + ReadMEM (ddBar5 + SB_SATA_BAR5_REG128 + (dbPortNum * 0x80), AccWidthUint8, &dbPortSataStatus); + if ((!(dbPortSataStatus & 0x01)) && (!((pConfig->SataEspPort) & (1 << dbPortNum)))) { + UnusedPortBitMap |= (1 << dbPortNum); + } + } + + // Decide if we need to shutdown the clock for all unused ports + SataType = pConfig->SataClass; + ClockOffEnabled = (pConfig->SataClkAutoOff && ((SataType == NATIVE_IDE_MODE) || (SataType == LEGACY_IDE_MODE) || \ + (SataType == IDE_TO_AHCI_MODE) || (SataType == IDE_TO_AMD_AHCI_MODE))) || \ + (pConfig->SataClkAutoOffAhciMode && ((SataType == AHCI_MODE) || (SataType == AMD_AHCI_MODE))); + + if (ClockOffEnabled) { + //Shutdown the clock for the port and do the necessary port reporting changes. + TRACE((DMSG_SB_TRACE, "Shutting down clock for SATA ports %X \n", UnusedPortBitMap)); + RWPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, UnusedPortBitMap); + RWMEM(ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~UnusedPortBitMap, 00); + } + + // If all ports are in disabled state, report at least one + ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); + if ( (dbPortSataStatus & 0x3F) == 0) { + dbPortSataStatus = 1; + RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~(0x3F), dbPortSataStatus); + } + + // Decide if we need to hide unused ports from being seen by OS (this saves OS startup time) + if (pConfig->SataHideUnusedPort && ClockOffEnabled) { + dbPortSataStatus &= ~UnusedPortBitMap; // Mask off unused ports + for (dbPortNum = 0; dbPortNum <= 6; dbPortNum++) { + if (dbPortSataStatus & (1 << dbPortNum)) + NumOfPorts++; + } + if (NumOfPorts == 0 ) { + NumOfPorts = 0x01; + } + RWMEM (ddBar5 + SB_SATA_BAR5_REG00, AccWidthUint8, 0xE0, NumOfPorts - 1); + } +} + + +void restrictSataCapabilities(AMDSBCFG* pConfig){ + //Restrict capabilities + if ( ((getSbCapability(Sb_Raid0_1_Capability)== 0x02) && (pConfig->SataClass == RAID_MODE)) || \ + ((getSbCapability(Sb_Raid5_Capability)== 0x02) && (pConfig->SataClass == RAID_MODE)) || \ + ((getSbCapability(Sb_Ahci_Capability)== 0x02) && ((pConfig->SataClass == AHCI_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE)))){ + pConfig->SataClass = NATIVE_IDE_MODE; + } +} diff --git a/src/vendorcode/amd/cimx/sb700/SB700.h b/src/vendorcode/amd/cimx/sb700/SB700.h new file mode 100644 index 0000000000..f9e71e8945 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SB700.h @@ -0,0 +1,1028 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_SB700_H_ +#define _AMD_SB700_H_ + +#pragma pack(push,1) + +#define CIMx_Version 0x0660 +#define RC_Information 0x00 +#define Additional_Changes_Indicator 0x00 + +#define SB_POWERON_INIT 0x001 +#define OUTDEBUG_PORT 0x002 +#define SB_BEFORE_PCI_INIT 0x010 +#define SB_AFTER_PCI_INIT 0x020 +#define SB_LATE_POST_INIT 0x030 +#define SB_BEFORE_PCI_RESTORE_INIT 0x040 +#define SB_AFTER_PCI_RESTORE_INIT 0x050 +#define SB_SMM_SERVICE 0x060 +#define SB_SMM_ACPION 0x061 + +#ifndef OEM_CALLBACK_BASE + #define OEM_CALLBACK_BASE 0x100 +#endif + +//0x00 - 0x0F callback functions are reserved for bootblock +#define SATA_PHY_PROGRAMMING OEM_CALLBACK_BASE + 0x10 +#define PULL_UP_PULL_DOWN_SETTINGS OEM_CALLBACK_BASE + 0x20 + +#define CFG_ADDR_PORT 0xCF8 +#define CFG_DATA_PORT 0xCFC +#define ATI_AZALIA_ExtBlk_Addr 0x0F8 +#define ATI_AZALIA_ExtBlk_DATA 0x0FC + +#define ALINK_ACCESS_INDEX 0x0CD8 +#define ALINK_ACCESS_DATA ALINK_ACCESS_INDEX + 4 + +/*------------------------------------------------------------------ +; I/O Base Address - Should be set by host BIOS +;------------------------------------------------------------------ */ +#define DELAY_PORT 0x0E0 + +/*------------------------------------------------------------------ +; DEBUG_PORT = 8-bit I/O Port Address for POST Code Display +;------------------------------------------------------------------ */ +#define SB7XX_DEVICE_ID 0x4385 + +#define SB700_A11 0x39 +#define SB700_A12 0x3A +#define SB700_A13 0x3B +#define SB700_A14 0x3C +#define SB700_A15 0x3D + +#define SATA_BUS_DEV_FUN ((0x11 << 3) + 0) +#define FC_BUS_DEV_FUN ((0x11 << 3) + 1) +#define USB1_OHCI0_BUS_DEV_FUN ((0x12 << 3) + 0) +#define USB1_OHCI1_BUS_DEV_FUN ((0x12 << 3) + 1) +#define USB2_OHCI0_BUS_DEV_FUN ((0x13 << 3) + 0) +#define USB2_OHCI1_BUS_DEV_FUN ((0x13 << 3) + 1) +#define USB3_OHCI_BUS_DEV_FUN ((0x14 << 3) + 5) +#define USB1_EHCI_BUS_DEV_FUN ((0x12 << 3) + 2) +#define USB2_EHCI_BUS_DEV_FUN ((0x13 << 3) + 2) + +#define SMBUS_BUS_DEV_FUN ((0x14 << 3) + 0) +#define IDE_BUS_DEV_FUN ((0x14 << 3) + 1) +#define AZALIA_BUS_DEV_FUN ((0x14 << 3) + 2) +#define LPC_BUS_DEV_FUN ((0x14 << 3) + 3) +#define SBP2P_BUS_DEV_FUN ((0x14 << 3) + 4) +#define NB_BDF ((0 << 3) + 0) +#define HT_LINK_BUS_DEV_FUN ((0x18 << 3) + 0) +#define DCT1_BUS_DEV_FUN ((0x18 << 3) + 2) +#define DCT2_BUS_DEV_FUN ((0x19 << 3) + 2) +#define DCT3_BUS_DEV_FUN ((0x1A << 3) + 2) +#define DCT4_BUS_DEV_FUN ((0x1B << 3) + 2) + + +//Sata Controller Mode +#define NATIVE_IDE_MODE 0 +#define RAID_MODE 1 +#define AHCI_MODE 2 +#define LEGACY_IDE_MODE 3 +#define IDE_TO_AHCI_MODE 4 +#define AMD_AHCI_MODE 5 +#define IDE_TO_AMD_AHCI_MODE 6 + +//Sata Port Configuration +#define SIX_PORTS 0 +#define FOUR_PORTS 1 + +#define SB750_SATA_DEFAULT_DEVICE_ID 0x4393 + +#define SB_AX_INDXC_REG30 0x30 +#define SB_AX_DATAC_REG34 0x34 +#define SB_AX_INDXP_REG38 0x38 +#define SB_AX_DATAP_REG3C 0x3C + +#define AX_INDXC 0 +#define AX_INDXP 1 +#define AXCFG 2 +#define ABCFG 3 + +#define SB_AB_REG02 0x02 +#define SB_AB_REG04 0x04 +#define SB_AB_REG40 0x40 // +#define SB_AB_REG54 0x54 //;miscCtr54 +#define SB_AB_REG58 0x58 //;RAB Control - RW - 32 bits - [RegAddr:58] +#define SB_AB_REG60 0x60 //;DMA Prefetch Enable Port 0 - RW - 32 bits - [RegAddr:60] +#define SB_AB_REG64 0x64 //;DMA Prefetch Flush Port 0 - RW - 32 bits - [RegAddr:64] +#define SB_AB_REG6C 0x6C //;DMA Prefetch Flush Port 0 - RW - 32 bits - [RegAddr:6C] +#define SB_AB_REG80 0x80 //;DMA Prefetch Control Port 1 - RW - 32 bits - [RegAddr:80] +#define SB_AB_REG88 0x88 //;DMA Prefetch Control Port 2 - RW - 32 bits - [RegAddr:88] +#define SB_AB_REG8C 0x8C //;AB Enhancement - RW - 16 bits - [RegAddr:88] +#define SB_AB_REG90 0x90 //;BIF Control - RW - 32 bits - [RegAddr:90] +#define SB_AB_REG94 0x94 //;MSI Control - RW - 32 bits +#define SB_AB_REG98 0x98 //;BIF Control 1 - RW - 32 bits +#define SB_AB_REG9C 0x9C //; +#define SB_AB_REG10050 BIT16+0x50 +#define SB_AB_REG10054 BIT16+0x54 //;AL_Arb_Ctl, AL_Clk_Ctl +#define SB_AB_REG10060 BIT16+0x60 //;DMA Prefetch Enable Port 0 - RW - 32 bits - [RegAddr:10060] +#define SB_AB_REG10064 BIT16+0x64 //;DMA Prefetch Flush Port 0 - RW - 32 bits - [RegAddr:64] +#define SB_AB_REG10090 BIT16+0x90 //; +#define SB_AB_REG1009C BIT16+0x9C //; + + +#define SB_PMIO_REG00 0x000 // MiscControl +#define SB_PMIO_REG01 0x001 // MiscStatus +#define SB_PMIO_REG02 0x002 // SmiWakeUpEventEnable1 +#define SB_PMIO_REG03 0x003 // SmiWakeUpEventEnable2 +#define SB_PMIO_REG04 0x004 // SmiWakeUpEventEnable3 +#define SB_PMIO_REG05 0x005 // SmiWakeUpEventStatus1 +#define SB_PMIO_REG06 0x006 // SmiWakeUpEventStatus2 +#define SB_PMIO_REG07 0x007 // SmiWakeUpEventStatus3 +#define SB_PMIO_REG08 0x008 // InactiveTmrEventEnable1 +#define SB_PMIO_REG09 0x009 // InactiveTmrEventEnable2 +#define SB_PMIO_REG0A 0x00A // InactiveTmrEventEnable3 +#define SB_PMIO_REG0B 0x00B // PmTmr1InitValue +#define SB_PMIO_REG0C 0x00C // PmTmr1CurValue +#define SB_PMIO_REG0D 0x00D // PwrLedExtEvent +#define SB_PMIO_REG0E 0x00E // AcpiControl +#define SB_PMIO_REG0F 0x00F // AcpiStatus +#define SB_PMIO_REG10 0x010 // AcpiEn +#define SB_PMIO_REG11 0x011 // S1AgpStpEn +#define SB_PMIO_REG12 0x012 // PmTmr2InitValue +#define SB_PMIO_REG13 0x013 // PmTmr2CurValue +#define SB_PMIO_REG14 0x014 // Programlo0RangeLo +#define SB_PMIO_REG15 0x015 // ProgramIo0Rangei +#define SB_PMIO_REG16 0x016 // ProgramIo1RangeLo +#define SB_PMIO_REG17 0x017 // ProgramIo1Rangei +#define SB_PMIO_REG18 0x018 // ProgramIo2RangeLo +#define SB_PMIO_REG19 0x019 // ProgramIo2Rangei +#define SB_PMIO_REG1A 0x01A // ProgramIo3RangeLo +#define SB_PMIO_REG1B 0x01B // ProgramIo3Rangei +#define SB_PMIO_REG1C 0x01C // ProgramIoEnable +#define SB_PMIO_REG1D 0x01D // IOMonitorStatus +#define SB_PMIO_REG1E 0x01E // InactiveTmrEventEnable4 +#define SB_PMIO_REG20 0x020 // AcpiPm1EvtBlkLo +#define SB_PMIO_REG21 0x021 // AcpiPm1EvtBlki +#define SB_PMIO_REG22 0x022 // AcpiPm1CntBlkLo +#define SB_PMIO_REG23 0x023 // AcpiPm1CntBlki +#define SB_PMIO_REG24 0x024 // AcpiPmTmrBlkLo +#define SB_PMIO_REG25 0x025 // AcpiPmTmrBlki +#define SB_PMIO_REG26 0x026 // CpuControlLo +#define SB_PMIO_REG27 0x027 // CpuControli +#define SB_PMIO_REG28 0x028 // AcpiGpe0BlkLo +#define SB_PMIO_REG29 0x029 // AcpiGpe0Blki +#define SB_PMIO_REG2A 0x02A // AcpiSmiCmdLo +#define SB_PMIO_REG2B 0x02B // AcpiSmiCmdi +#define SB_PMIO_REG2C 0x02C // AcpiPmaCntBlkLo +#define SB_PMIO_REG2D 0x02D // AcpiPmaCntBlki +#define SB_PMIO_REG2E 0x02E // AcpiSsCntBlkLo +#define SB_PMIO_REG2F 0x02F // AcpiSsCntBlki +#define SB_PMIO_REG30 0x030 // GEvtConfig0 +#define SB_PMIO_REG31 0x031 // GEvtConfig1 +#define SB_PMIO_REG32 0x032 // GPMConfig0 +#define SB_PMIO_REG33 0x033 // GPMConfig1 +#define SB_PMIO_REG34 0x034 // GPMConfig2 +#define SB_PMIO_REG35 0x035 // GPMConfig3 +#define SB_PMIO_REG36 0x036 // GEvtLevelConfig +#define SB_PMIO_REG37 0x037 // GPMLevelConfig0 +#define SB_PMIO_REG38 0x038 // GPMLevelConfig1 +#define SB_PMIO_REG39 0x039 // GEvtStatus +#define SB_PMIO_REG3A 0x03A // PMEStatus0 +#define SB_PMIO_REG3B 0x03B // PMEStatus1 +#define SB_PMIO_REG3C 0x03C // OtersConfig +#define SB_PMIO_REG3E 0x03E // VRT_T1 +#define SB_PMIO_REG3F 0x03F // VRT_T2 +#define SB_PMIO_REG40 0x040 // Fan0DutyCycle +#define SB_PMIO_REG41 0x041 // Fan0Control +#define SB_PMIO_REG42 0x042 // Fan1DutyCycle +#define SB_PMIO_REG43 0x043 // Reserved for internal use +#define SB_PMIO_REG50 0x050 // PM_Enable +#define SB_PMIO_REG51 0x051 // TPRESET1 +#define SB_PMIO_REG52 0x052 // TPRESET2 +#define SB_PMIO_REG53 0x053 // TESTENABLE +#define SB_PMIO_REG54 0x054 // PWRBTTN_CLR +#define SB_PMIO_REG55 0x055 // SoftPciRst +#define SB_PMIO_REG56 0x056 // Reserved +#define SB_PMIO_REG59 0x059 // Ac97Mask +#define SB_PMIO_REG60 0x060 // Options_0 +#define SB_PMIO_REG61 0x061 // Options_1 +#define SB_PMIO_REG62 0x062 // Sadow_SCI +#define SB_PMIO_REG63 0x063 // SwitcVoltageTime +#define SB_PMIO_REG64 0x064 // SwitchGI_Time +#define SB_PMIO_REG65 0x065 // UsbPMControl +#define SB_PMIO_REG66 0x066 // MiscEnable66 +#define SB_PMIO_REG67 0x067 // MiscEnable67 +#define SB_PMIO_REG68 0x068 // MiscEnable68 +#define SB_PMIO_REG69 0x069 // WatcDogTimerControl +#define SB_PMIO_REG6C 0x06C // WatcDogTimerBase0 +#define SB_PMIO_REG6D 0x06D // WatcDogTimerBase1 +#define SB_PMIO_REG6E 0x06E // WatcDogTimerBase2 +#define SB_PMIO_REG6F 0x06F // WatcDogTimerBase3 +#define SB_PMIO_REG70 0x070 // S_LdtStartTime +#define SB_PMIO_REG71 0x071 // FidVidOption +#define SB_PMIO_REG72 0x072 // Spare4 +#define SB_PMIO_REG73 0x073 // Spare5 +#define SB_PMIO_REG74 0x074 // PwrFailSadow +#define SB_PMIO_REG75 0x075 // Tpreset1b +#define SB_PMIO_REG76 0x076 // S0S3ToS5Enable0 +#define SB_PMIO_REG77 0x077 // S0S3ToS5Enable1 +#define SB_PMIO_REG78 0x078 // S0S3ToS5Enable2 +#define SB_PMIO_REG79 0x079 // S0S3ToS5Enable3 +#define SB_PMIO_REG7A 0x07A // NoStatusControl0 +#define SB_PMIO_REG7B 0x07B // NoStatusControl1 +#define SB_PMIO_REG7C 0x07C // MiscEnable7C +#define SB_PMIO_REG80 0x080 // SMAF0 +#define SB_PMIO_REG81 0x081 // SMAF1 +#define SB_PMIO_REG82 0x082 // SMAF2 +#define SB_PMIO_REG83 0x083 // SMAF3 +#define SB_PMIO_REG84 0x084 // WakePinCntl +#define SB_PMIO_REG85 0x085 // CF9Rst +#define SB_PMIO_REG86 0x086 // ThermTrotCntl +#define SB_PMIO_REG87 0x087 // LdtStpCmd +#define SB_PMIO_REG88 0x088 // LdtStartTime +#define SB_PMIO_REG89 0x089 // AgpStartTime +#define SB_PMIO_REG8A 0x08A // LdtAgpTimeCntl +#define SB_PMIO_REG8B 0x08B // StutterTime +#define SB_PMIO_REG8C 0x08C // StpClkDlyTime +#define SB_PMIO_REG8D 0x08D // AbPmeCntl +#define SB_PMIO_REG8E 0x08E // FakeAsr +#define SB_PMIO_REG8F 0x08F // FakeAsrEn +#define SB_PMIO_REG90 0x090 // GEVENTOUT +#define SB_PMIO_REG91 0x091 // GEVENTEnable +#define SB_PMIO_REG92 0x092 // GEVENTIN +#define SB_PMIO_REG95 0x095 // GPM98EN +#define SB_PMIO_REG9A 0x09A // EnanceControl +#define SB_PMIO_REG9E 0x09E // EnanceControl +#define SB_PMIO_REG9F 0x09F // EnanceControl +#define SB_PMIO_REGA0 0x0A0 // Programlo4RangeLo +#define SB_PMIO_REGA1 0x0A1 // ProgramIo4Rangei +#define SB_PMIO_REGA2 0x0A2 // Programlo5RangeLo +#define SB_PMIO_REGA3 0x0A3 // ProgramIo5Rangei +#define SB_PMIO_REGA4 0x0A4 // Programlo6RangeLo +#define SB_PMIO_REGA5 0x0A5 // ProgramIo6Rangei +#define SB_PMIO_REGA6 0x0A6 // Programlo7RangeLo +#define SB_PMIO_REGA7 0x0A7 // ProgramIo7Rangei +#define SB_PMIO_REGA8 0x0A8 // PIO7654Enable +#define SB_PMIO_REGA9 0x0A9 // PIO7654Status +#define SB_PMIO_REGB0 0x0B0 +#define SB_PMIO_REGB1 0x0B1 +#define SB_PMIO_REGB2 0x0B2 // MiscControl3 +#define SB_PMIO_REGB4 0x0B4 // HPET BAR +#define SB_PMIO_REGB6 0x0B6 +#define SB_PMIO_REGB7 0x0B7 +#define SB_PMIO_REGBB 0x0BB // IMC_ACPI_Enable +#define SB_PMIO_REGBC 0x0BC // +#define SB_PMIO_REGBD 0x0BD // +#define SB_PMIO_REGC9 0x0C9 // MultiK8Control +#define SB_PMIO_REGCA 0x0CA // +#define SB_PMIO_REGCB 0x0CB // +#define SB_PMIO_REGCC 0x0CC // +#define SB_PMIO_REGCD 0x0CD // +#define SB_PMIO_REGD0 0x0D0 // +#define SB_PMIO_REGD2 0x0D2 // +#define SB_PMIO_REGD4 0x0D4 // +#define SB_PMIO_REGD7 0x0D7 // + + +#define SB_RTC_REG00 0x00 // Seconds - RW +#define SB_RTC_REG01 0x01 // Seconds Alarm - RW +#define SB_RTC_REG02 0x02 // Minutes - RW +#define SB_RTC_REG03 0x03 // Minutes Alarm - RW +#define SB_RTC_REG04 0x04 // ours - RW +#define SB_RTC_REG05 0x05 // ours Alarm- RW +#define SB_RTC_REG06 0x06 // Day of Week - RW +#define SB_RTC_REG07 0x07 // Date of Mont - RW +#define SB_RTC_REG08 0x08 // Mont - RW +#define SB_RTC_REG09 0x09 // Year - RW +#define SB_RTC_REG0A 0x0A // Register A - RW +#define SB_RTC_REG0B 0x0B // Register B - RW +#define SB_RTC_REG0C 0x0C // Register C - R +#define SB_RTC_REG0D 0x0D // DateAlarm - RW +#define SB_RTC_REG32 0x32 // AltCentury - RW +#define SB_RTC_REG48 0x48 // Century - RW +#define SB_RTC_REG50 0x50 // Extended RAM Address Port - RW +#define SB_RTC_REG53 0x53 // Extended RAM Data Port - RW +#define SB_RTC_REG7E 0x7E // RTC Time Clear - RW +#define SB_RTC_REG7F 0x7F // RTC RAM Enable - RW + +#define B_ECMOS_REG00 0x00 // scratc-reg + //;BIT0=0 AsicDebug is enabled + //;BIT1=0 SLT S3 runs +#define SB_ECMOS_REG01 0x01 +#define SB_ECMOS_REG02 0x02 +#define SB_ECMOS_REG03 0x03 +#define SB_ECMOS_REG04 0x04 +#define SB_ECMOS_REG05 0x05 +#define SB_ECMOS_REG06 0x06 +#define SB_ECMOS_REG07 0x07 +#define SB_ECMOS_REG08 0x08 // save 32BIT Pysical address of Config structure +#define SB_ECMOS_REG09 0x09 +#define SB_ECMOS_REG0A 0x0A +#define SB_ECMOS_REG0B 0x0B + +#define SB_ECMOS_REG0C 0x0C //;save MODULE_ID +#define SB_ECMOS_REG0D 0x0D //;Reserve for NB + +#define SB_IOMAP_REG00 0x000 // Dma_C 0 +#define SB_IOMAP_REG02 0x002 // Dma_C 1 +#define SB_IOMAP_REG04 0x004 // Dma_C 2 +#define SB_IOMAP_REG06 0x006 // Dma_C 3 +#define SB_IOMAP_REG08 0x008 // Dma_Status +#define SB_IOMAP_REG09 0x009 // Dma_WriteRest +#define SB_IOMAP_REG0A 0x00A // Dma_WriteMask +#define SB_IOMAP_REG0B 0x00B // Dma_WriteMode +#define SB_IOMAP_REG0C 0x00C // Dma_Clear +#define SB_IOMAP_REG0D 0x00D // Dma_MasterClr +#define SB_IOMAP_REG0E 0x00E // Dma_ClrMask +#define SB_IOMAP_REG0F 0x00F // Dma_AllMask +#define SB_IOMAP_REG20 0x020 // IntrCntrlReg1 +#define SB_IOMAP_REG21 0x021 // IntrCntrlReg2 +#define SB_IOMAP_REG40 0x040 // TimerC0 +#define SB_IOMAP_REG41 0x041 // TimerC1 +#define SB_IOMAP_REG42 0x042 // TimerC2 +#define SB_IOMAP_REG43 0x043 // Tmr1CntrlWord +#define SB_IOMAP_REG61 0x061 // Nmi_Status +#define SB_IOMAP_REG70 0x070 // Nmi_Enable +#define SB_IOMAP_REG71 0x071 // RtcDataPort +#define SB_IOMAP_REG72 0x072 // AlternatRtcAddrPort +#define SB_IOMAP_REG73 0x073 // AlternatRtcDataPort +#define SB_IOMAP_REG80 0x080 // Dma_Page_Reserved0 +#define SB_IOMAP_REG81 0x081 // Dma_PageC2 +#define SB_IOMAP_REG82 0x082 // Dma_PageC3 +#define SB_IOMAP_REG83 0x083 // Dma_PageC1 +#define SB_IOMAP_REG84 0x084 // Dma_Page_Reserved1 +#define SB_IOMAP_REG85 0x085 // Dma_Page_Reserved2 +#define SB_IOMAP_REG86 0x086 // Dma_Page_Reserved3 +#define SB_IOMAP_REG87 0x087 // Dma_PageC0 +#define SB_IOMAP_REG88 0x088 // Dma_Page_Reserved4 +#define SB_IOMAP_REG89 0x089 // Dma_PageC6 +#define SB_IOMAP_REG8A 0x08A // Dma_PageC7 +#define SB_IOMAP_REG8B 0x08B // Dma_PageC5 +#define SB_IOMAP_REG8C 0x08C // Dma_Page_Reserved5 +#define SB_IOMAP_REG8D 0x08D // Dma_Page_Reserved6 +#define SB_IOMAP_REG8E 0x08E // Dma_Page_Reserved7 +#define SB_IOMAP_REG8F 0x08F // Dma_Refres +#define SB_IOMAP_REG92 0x092 // FastInit +#define SB_IOMAP_REGA0 0x0A0 // IntrCntrl2Reg1 +#define SB_IOMAP_REGA1 0x0A1 // IntrCntrl2Reg2 +#define SB_IOMAP_REGC0 0x0C0 // Dma2_C4Addr +#define SB_IOMAP_REGC2 0x0C2 // Dma2_C4Cnt +#define SB_IOMAP_REGC4 0x0C4 // Dma2_C5Addr +#define SB_IOMAP_REGC6 0x0C6 // Dma2_C5Cnt +#define SB_IOMAP_REGC8 0x0C8 // Dma2_C6Addr +#define SB_IOMAP_REGCA 0x0CA // Dma2_C6Cnt +#define SB_IOMAP_REGCC 0x0CC // Dma2_C7Addr +#define SB_IOMAP_REGCE 0x0CE // Dma2_C7Cnt +#define SB_IOMAP_REGD0 0x0D0 // Dma_Status +#define SB_IOMAP_REGD2 0x0D2 // Dma_WriteRest +#define SB_IOMAP_REGD4 0x0D4 // Dma_WriteMask +#define SB_IOMAP_REGD6 0x0D6 // Dma_WriteMode +#define SB_IOMAP_REGD8 0x0D8 // Dma_Clear +#define SB_IOMAP_REGDA 0x0DA // Dma_Clear +#define SB_IOMAP_REGDC 0x0DC // Dma_ClrMask +#define SB_IOMAP_REGDE 0x0DE // Dma_ClrMask +#define SB_IOMAP_REGF0 0x0F0 // NCP_Error +#define SB_IOMAP_REG40B 0x040B // DMA1_Extend +#define SB_IOMAP_REG4D0 0x04D0 // IntrEdgeControl +#define SB_IOMAP_REG4D6 0x04D6 // DMA2_Extend +#define SB_IOMAP_REGC00 0x0C00 // Pci_Intr_Index +#define SB_IOMAP_REGC01 0x0C01 // Pci_Intr_Data +#define SB_IOMAP_REGC14 0x0C14 // Pci_Error +#define SB_IOMAP_REGC50 0x0C50 // CMIndex +#define SB_IOMAP_REGC51 0x0C51 // CMData +#define SB_IOMAP_REGC52 0x0C52 // GpmPort +#define SB_IOMAP_REGC6F 0x0C6F // Isa_Misc +#define SB_IOMAP_REGCD0 0x0CD0 // PMio2_Index +#define SB_IOMAP_REGCD1 0x0CD1 // PMio2_Data +#define SB_IOMAP_REGCD4 0x0CD4 // BIOSRAM_Index +#define SB_IOMAP_REGCD5 0x0CD5 // BIOSRAM_Data +#define SB_IOMAP_REGCD6 0x0CD6 // PM_Index +#define SB_IOMAP_REGCD7 0x0CD7 // PM_Data +#define SB_IOMAP_REGCF9 0x0CF9 // CF9Rst reg + + +#define SB_CM_REG02 0x002 // TempStatus (via SB_IOMAP_REGC50) +#define SB_CM_REG03 0x003 // TempInterrupt (via SB_IOMAP_REGC50) + +#define SB_SATA_REG00 0x000 // Vendor ID - R- 16 bits +#define SB_SATA_REG02 0x002 // Device ID - RW -16 bits +#define SB_SATA_REG04 0x004 // PCI Command - RW - 16 bits +#define SB_SATA_REG06 0x006 // PCI Status - RW - 16 bits +#define SB_SATA_REG08 0x008 // Revision ID/PCI Class Code - R - 32 bits - Offset: 08 +#define SB_SATA_REG0C 0x00C // Cace Line Size - R/W - 8bits +#define SB_SATA_REG0D 0x00D // Latency Timer - RW - 8 bits +#define SB_SATA_REG0E 0x00E // eader Type - R - 8 bits +#define SB_SATA_REG0F 0x00F // BIST - R - 8 bits +#define SB_SATA_REG10 0x010 // Base Address Register 0 - RW - 32 bits +#define SB_SATA_REG14 0x014 // Base Address Register 1 - RW- 32 bits +#define SB_SATA_REG18 0x018 // Base Address Register 2 - RW - 32 bits +#define SB_SATA_REG1C 0x01C // Base Address Register 3 - RW - 32 bits +#define SB_SATA_REG20 0x020 // Base Address Register 4 - RW - 32 bits +#define SB_SATA_REG24 0x024 // Base Address Register 5 - RW - 32 bits +#define SB_SATA_REG2C 0x02C // Subsystem Vendor ID - R - 16 bits +#define SB_SATA_REG2D 0x02D // Subsystem ID - R - 16 bits +#define SB_SATA_REG30 0x030 // Expansion ROM Base Address - 32 bits +#define SB_SATA_REG34 0x034 // Capabilities Pointer - R - 32 bits +#define SB_SATA_REG3C 0x03C // Interrupt Line - RW - 8 bits +#define SB_SATA_REG3D 0x03D // Interrupt Pin - R - 8 bits +#define SB_SATA_REG3E 0x03E // Min Grant - R - 8 bits +#define SB_SATA_REG3F 0x03F // Max Latency - R - 8 bits +#define SB_SATA_REG40 0x040 // Configuration - RW - 32 bits +#define SB_SATA_REG44 0x044 // Software Data Register - RW - 32 bits +#define SB_SATA_REG48 0x048 +#define SB_SATA_REG50 0x050 // Message Capability - R - 16 bits +#define SB_SATA_REG52 0x052 // Message Control - R/W - 16 bits +#define SB_SATA_REG54 0x054 // Message Address - R/W - 32 bits +#define SB_SATA_REG58 0x058 // Message Data - R/W - 16 bits +#define SB_SATA_REG5C 0x05C // RAMBIST Control Register - R/W - 8 bits +#define SB_SATA_REG5D 0x05D // RAMBIST Status0 Register - R - 8 bits +#define SB_SATA_REG5E 0x05E // RAMBIST Status1 Register - R - 8 bits +#define SB_SATA_REG60 0x060 // Power Management Capabilities - R - 32 bits +#define SB_SATA_REG64 0x064 // Power Management Control + Status - RW - 32 bits +#define SB_SATA_REG68 0x068 // MSI Program Weigt - R/W - 8 bits +#define SB_SATA_REG69 0x069 // PCI Burst Timer - R/W - 8 bits +#define SB_SATA_REG70 0x070 // PCI Bus Master - IDE0 - RW - 32 bits +#define SB_SATA_REG74 0x074 // PRD Table Address - IDE0 - RW - 32 bits +#define SB_SATA_REG78 0x078 // PCI Bus Master - IDE1 - RW - 32 bits +#define SB_SATA_REG7C 0x07C // PRD Table Address - IDE1 - RW - 32 bits +#define SB_SATA_REG80 0x080 // Data Transfer Mode - IDE0 - RW - 32 bits +#define SB_SATA_REG84 0x084 // Data Transfer Mode - IDE1 - RW - 32 bits +#define SB_SATA_REG86 0x086 // PY Global Control +#define SB_SATA_REG87 0x087 +#define SB_SATA_REG88 0x088 // PHY Port0 Control - Port0 PY fine tune(0:23) +#define SB_SATA_REG8A 0x08A +#define SB_SATA_REG8C 0x08C // PHY Port1 Control - Port0 PY fine tune(0:23) +#define SB_SATA_REG8E 0x08E +#define SB_SATA_REG90 0x090 // PHY Port2 Control - Port0 PY fine tune(0:23) +#define SB_SATA_REG92 0x092 +#define SB_SATA_REG94 0x094 // PHY Port3 Control - Port0 PY fine tune(0:23) +#define SB_SATA_REG96 0x096 +#define SB_SATA_REG98 0x098 // EEPROM Memory Address - Command + Status - RW - 32 bits +#define SB_SATA_REG9C 0x09C // EEPROM Memory Data - RW - 32 bits +#define SB_SATA_REGA0 0x0A0 // +#define SB_SATA_REGA4 0x0A4 // +#define SB_SATA_REGA5 0x0A5 //; +#define SB_SATA_REGA8 0x0A8 // +#define SB_SATA_REGAD 0x0AD //; +#define SB_SATA_REGB0 0x0B0 // IDE1 Task File Configuration + Status - RW - 32 bits +#define SB_SATA_REGB5 0x0B5 //; +#define SB_SATA_REGBD 0x0BD //; +#define SB_SATA_REGC0 0x0C0 // BA5 Indirect Address - RW - 32 bits +#define SB_SATA_REGC4 0x0C4 // BA5 Indirect Access - RW - 32 bits + +#define SB_SATA_BAR5_REG00 0x000 // PCI Bus Master - IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REG04 0x004 // PRD Table Address - IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REG08 0x008 // PCI Bus Master - IDE1 - RW - 32 bits +#define SB_SATA_BAR5_REG0C 0x00C // PRD Table Address - IDE1 - RW - 32 bits +#define SB_SATA_BAR5_REG10 0x010 // PCI Bus Master2 - IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REG18 0x018 // PCI Bus Master2 - IDE1 - RW - 32 bits +#define SB_SATA_BAR5_REG20 0x020 // PRD Address - IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REG24 0x024 // PCI Bus Master Byte Count - IDE0- RW - 32 bits +#define SB_SATA_BAR5_REG28 0x028 // PRD Address - IDE1 - RW - 32 bits +#define SB_SATA_BAR5_REG2C 0x02C // PCI Bus Master Byte Count - IDE1 - RW - 32 bits +#define SB_SATA_BAR5_REG40 0x040 // FIFO Valid Byte Count and Control - IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REG44 0x044 // FIFO Valid Byte Count and Control - IDE1 - RW - 32 bits +#define SB_SATA_BAR5_REG48 0x048 // System Configuration Status - Command - RW - 32 bits +#define SB_SATA_BAR5_REG4C 0x04C // System Software Data Register - RW - 32 bits +#define SB_SATA_BAR5_REG50 0x050 // FLAS Memory Address - Command + Status - RW - 32 bits +#define SB_SATA_BAR5_REG54 0x054 // FLAS Memory Data - RW - 32 bits +#define SB_SATA_BAR5_REG58 0x058 // EEPROM Memory Address - Command + Status - RW - 32 bits +#define SB_SATA_BAR5_REG5C 0x05C // EEPROM Memory Data - RW - 32 bits +#define SB_SATA_BAR5_REG60 0x060 // FIFO Port - IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REG68 0x068 // FIFO Pointers1- IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REG6C 0x06C // FIFO Pointers2- IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REG70 0x070 // FIFO Port - IDE1- RW - 32 bits +#define SB_SATA_BAR5_REG78 0x078 // FIFO Pointers1- IDE1- RW - 32 bits +#define SB_SATA_BAR5_REG7C 0x07C // FIFO Pointers2- IDE1- RW - 32 bits +#define SB_SATA_BAR5_REG80 0x080 // IDE0 Task File Register 0- RW - 32 bits +#define SB_SATA_BAR5_REG84 0x084 // IDE0 Task File Register 1- RW - 32 bits +#define SB_SATA_BAR5_REG88 0x088 // IDE0 Task File Register 2- RW - 32 bits +#define SB_SATA_BAR5_REG8C 0x08C // IDE0 Read Aead Data - RW - 32 bits +#define SB_SATA_BAR5_REG90 0x090 // IDE0 Task File Register 0 - Command Buffering - RW - 32 bits +#define SB_SATA_BAR5_REG94 0x094 // IDE0 Task File Register 1 - Command Buffering - RW - 32 bits +#define SB_SATA_BAR5_REG9C 0x09C // IDE0 Virtual DMA/PIO Read Aead Byte Count - RW - 32 bits +#define SB_SATA_BAR5_REGA0 0x0A0 // IDE0 Task File Configuration + Status - RW - 32 bits +#define SB_SATA_BAR5_REGB4 0x0B4 // Data Transfer Mode -IDE0 - RW - 32 bits +#define SB_SATA_BAR5_REGC0 0x0C0 // IDE1 Task File Register 0 - RW - 32 bits +#define SB_SATA_BAR5_REGC4 0x0C4 // IDE1 Task File Register 1 - RW - 32 bits +#define SB_SATA_BAR5_REGC8 0x0C8 // IDE1 Task File Register 2 - RW - 32 bits +#define SB_SATA_BAR5_REGCC 0x0CC // Read/Write Aead Data - RW - 32 bits +#define SB_SATA_BAR5_REGD0 0x0D0 // IDE1 Task File Register 0 - Command Buffering - RW - 32 bits +#define SB_SATA_BAR5_REGD4 0x0D4 // IDE1 Task File Register 1 - Command Buffering - RW - 32 bits +#define SB_SATA_BAR5_REGDC 0x0DC // IDE1 Virtual DMA/PIO Read Aead Byte Count - RW - 32 bits +#define SB_SATA_BAR5_REGE0 0x0E0 // IDE1 Task File Configuration + Status - RW - 32 bits +#define SB_SATA_BAR5_REGF4 0x0F4 // Data Transfer Mode - IDE1 - RW - 32 bits +#define SB_SATA_BAR5_REGF8 0x0F8 // PORT Configuration +#define SB_SATA_BAR5_REGFC 0x0FC + +#define SB_SATA_BAR5_REG100 0x0100 //;Serial ATA SControl - RW - 32 bits - [Offset: 100h (channel 1) / 180 +#define SB_SATA_BAR5_REG104 0x0104 //;Serial ATA Sstatus - RW - 32 bits - [Offset: 104h (channel 1) / 184h (cannel +#define SB_SATA_BAR5_REG108 0x0108 //;Serial ATA Serror - RW - 32 bits - [Offset: 108h (channel 1) / 188h (cannel +#define SB_SATA_BAR5_REG10C 0x010C //;Serial ATA Sdevice - RW - 32 bits - [Offset: 10Ch (channel 1) / 18Ch (cannel +#define SB_SATA_BAR5_REG110 0x0110 // Port-N Interrupt Status +#define SB_SATA_BAR5_REG144 0x0144 //;Serial ATA PY Configuration - RW - 32 bits +#define SB_SATA_BAR5_REG148 0x0148 //;SIEN - RW - 32 bits - [Offset: 148 (channel 1) / 1C8 (cannel 2)] +#define SB_SATA_BAR5_REG14C 0x014C //;SFISCfg - RW - 32 bits - [Offset: 14C (channel 1) / 1CC (cannel 2)] +#define SB_SATA_BAR5_REG120 0x0120 // Port Task Fike Data +#define SB_SATA_BAR5_REG128 0x0128 // Port Serial ATA Status +#define SB_SATA_BAR5_REG12C 0x012C // Port Serial ATA Control + +#define SB_SATA_BAR5_REG130 0x0130 +#define SB_SATA_BAR5_REG1B0 0x01B0 +#define SB_SATA_BAR5_REG230 0x0230 +#define SB_SATA_BAR5_REG2B0 0x02B0 + +#define SB_FC_REG00 0x00 // Device/Vendor ID - R +#define SB_FC_REG04 0x04 // Command - RW +#define SB_FC_REG10 0x10 // BAR + +#define SB_FC_MMIO_REG70 0x070 +#define SB_FC_MMIO_REG200 0x200 + +#define SB_OHCI_REG00 0x00 // Device/Vendor ID - R +#define SB_OHCI_REG04 0x04 // Command - RW +#define SB_OHCI_REG06 0x06 // Status - R +#define SB_OHCI_REG08 0x08 // Revision ID/Class Code - R +#define SB_OHCI_REG0C 0x0C // Miscellaneous - RW +#define SB_OHCI_REG10 0x10 // Bar_OCI - RW +#define SB_OHCI_REG2C 0x2C // Subsystem Vendor ID/ Subsystem ID - RW +#define SB_OHCI_REG34 0x34 // Capability Pointer - R +#define SB_OHCI_REG3C 0x3C // Interrupt Line - RW +#define SB_OHCI_REG3D 0x3D // Interrupt Line - RW + +#define SB_OHCI_REG40 0x40 // Config Timers - RW +#define SB_OHCI_REG4C 0x4C // MSI Weigt - RW +#define SB_OHCI_REG50 0x50 // ATI Misc Control - RW +#define SB_OHCI_REG51 0x51 +#define SB_OHCI_REG58 0x58 // Over Current Control - RW +#define SB_OHCI_REG5C 0x5C // Over Current Control - RW +#define SB_OHCI_REG60 0x60 // Serial Bus Release Number - R +#define SB_OHCI_REG68 0x68 // Over Current Enable - RW +#define SB_OHCI_REGD0 0x0D0 // MSI Control - RW +#define SB_OHCI_REGD4 0x0D4 // MSI Address - RW +#define SB_OHCI_REGD8 0x0D8 // MSI Data - RW +#define SB_OHCI_BAR_REG00 0x00 // cRevision - R +#define SB_OHCI_BAR_REG04 0x04 // cControl +#define SB_OHCI_BAR_REG08 0x08 // cCommandStatus +#define SB_OHCI_BAR_REG0C 0x0C // cInterruptStatus RW +#define SB_OHCI_BAR_REG10 0x10 // cInterruptEnable +#define SB_OHCI_BAR_REG14 0x14 // cInterruptDisable +#define SB_OHCI_BAR_REG18 0x18 // HcCCA +#define SB_OHCI_BAR_REG1C 0x1C // cPeriodCurrentED +#define SB_OHCI_BAR_REG20 0x20 // HcControleadED +#define SB_OHCI_BAR_REG24 0x24 // cControlCurrentED RW +#define SB_OHCI_BAR_REG28 0x28 // HcBulkeadED +#define SB_OHCI_BAR_REG2C 0x2C // cBulkCurrentED- RW +#define SB_OHCI_BAR_REG30 0x30 // HcDoneead +#define SB_OHCI_BAR_REG34 0x34 // cFmInterval +#define SB_OHCI_BAR_REG38 0x38 // cFmRemaining +#define SB_OHCI_BAR_REG3C 0x3C // cFmNumber +#define SB_OHCI_BAR_REG40 0x40 // cPeriodicStart +#define SB_OHCI_BAR_REG44 0x44 // HcLSThresold +#define SB_OHCI_BAR_REG48 0x48 // HcRDescriptorA +#define SB_OHCI_BAR_REG4C 0x4C // HcRDescriptorB +#define SB_OHCI_BAR_REG50 0x50 // HcRStatus +#define SB_OHCI_BAR_REG160 0x160 + +#define SB_EHCI_REG00 0x00 // DEVICE/VENDOR ID - R +#define SB_EHCI_REG04 0x04 // Command - RW +#define SB_EHCI_REG06 0x06 // Status - R +#define SB_EHCI_REG08 0x08 // Revision ID/Class Code - R +#define SB_EHCI_REG0C 0x0C // Miscellaneous - RW +#define SB_EHCI_REG10 0x10 // BAR - RW +#define SB_EHCI_REG2C 0x2C // Subsystem ID/Subsystem Vendor ID - RW +#define SB_EHCI_REG34 0x34 // Capability Pointer - R +#define SB_EHCI_REG3C 0x3C // Interrupt Line - RW +#define SB_EHCI_REG3D 0x3D // Interrupt Line - RW +#define SB_EHCI_REG40 0x40 // Config Timers - RW +#define SB_EHCI_REG4C 0x4C // MSI Weigt - RW +#define SB_EHCI_REG50 0x50 // ATI Misc Control - RW +#define SB_EHCI_REG54 0x54 // ATI Misc Control - RW +#define SB_EHCI_REG58 0x58 // Over Current Control - R +#define SB_EHCI_REG60 0x60 // SBRN - R +#define SB_EHCI_REG61 0x61 // FLADJ - RW +#define SB_EHCI_REG62 0x62 // PORTWAKECAP - RW +#define SB_EHCI_REGD0 0x0D0 // MSI Control - RW +#define SB_EHCI_REGD4 0x0D4 // MSI Address - RW +#define SB_EHCI_REGD8 0x0D8 // MSI Data - RW +#define SB_EHCI_REGDC 0x0DC // PME Control - RW +#define SB_EHCI_REGE0 0x0E0 // PME Data / Status - RW +#define SB_EHCI_BAR_REG00 0x00 // CAPLENGT - R +#define SB_EHCI_BAR_REG02 0x002 // CIVERSION- R +#define SB_EHCI_BAR_REG04 0x004 // CSPARAMS - R +#define SB_EHCI_BAR_REG08 0x008 // CCPARAMS - R +#define SB_EHCI_BAR_REG0C 0x00C // CSP-PORTROUTE - R +#define SB_EHCI_BAR_REG20 0x020 // USBCMD - RW - 32 bits +#define SB_EHCI_BAR_REG24 0x024 // USBSTS - RW - 32 bits +#define SB_EHCI_BAR_REG28 0x028 // USBINTR -RW - 32 bits +#define SB_EHCI_BAR_REG2C 0x02C // FRINDEX -RW - 32 bits +#define SB_EHCI_BAR_REG30 0x030 // CTRLDSSEGMENT -RW - 32 bits +#define SB_EHCI_BAR_REG34 0x034 // PERIODICLISTBASE -RW - 32 bits +#define SB_EHCI_BAR_REG38 0x038 // ASYNCLISTADDR -RW - 32 bits +#define SB_EHCI_BAR_REG60 0x060 // CONFIGFLAG -RW - 32 bits +#define SB_EHCI_BAR_REG64 0x064 // PORTSC(1-N_PORTS) -RW - 32 bits +#define SB_EHCI_BAR_REG84 0x084 // Packet Buffer Thresold Values - RW - 32 bits +#define SB_EHCI_BAR_REG88 0x088 // Packet Buffer Dept Value - RW - 32 bits +#define SB_EHCI_BAR_REG94 0x094 // UTMI Control and Status - RW - 32 bits +#define SB_EHCI_BAR_REG98 0x098 // Bist Control - RW - 32 bits +#define SB_EHCI_BAR_REG9C 0x09C // ATI EOR Control - RW - 32 bits +#define SB_EHCI_BAR_REGA4 0x0A4 // USB IN/OUT FIFO Thresold Setting +#define SB_EHCI_BAR_REGBC 0x0BC // ECI misc Setting +#define SB_EHCI_BAR_REGC0 0x0C0 // USB PHY Auto Calibration Setting + +#define SB_SMBUS_REG00 0x000 //;VendorID - R +#define SB_SMBUS_REG02 0x002 //;DeviceID - R +#define SB_SMBUS_REG04 0x004 // Command- RW +#define SB_SMBUS_REG05 0x005 // Command- RW +#define SB_SMBUS_REG06 0x006 // STATUS- RW +#define SB_SMBUS_REG08 0x008 // Revision ID/Class Code- R +#define SB_SMBUS_REG0A 0x00A //; +#define SB_SMBUS_REG0B 0x00B //; +#define SB_SMBUS_REG0C 0x00C // Cace Line Size- R +#define SB_SMBUS_REG0D 0x00D // Latency Timer- R +#define SB_SMBUS_REG0E 0x00E // eader Type- R +#define SB_SMBUS_REG0F 0x00F // BIST- R +#define SB_SMBUS_REG10 0x010 // Base Address 0- R +#define SB_SMBUS_REG11 0x011 //; +#define SB_SMBUS_REG12 0x012 //; +#define SB_SMBUS_REG13 0x013 //; +#define SB_SMBUS_REG14 0x014 // Base Address 1- R +#define SB_SMBUS_REG18 0x018 // Base Address 2- R +#define SB_SMBUS_REG1C 0x01C // Base Address 3- R +#define SB_SMBUS_REG20 0x020 // Base Address 4- R +#define SB_SMBUS_REG24 0x024 // Base Address 5- R +#define SB_SMBUS_REG28 0x028 // Cardbus CIS Pointer- R +#define SB_SMBUS_REG2C 0x02C // Subsystem Vendor ID- W +#define SB_SMBUS_REG2E 0x02E // Subsystem ID- W +#define SB_SMBUS_REG30 0x030 // Expansion ROM Base Address - R +#define SB_SMBUS_REG34 0x034 // Capability Pointer - R +#define SB_SMBUS_REG38 0x038 +#define SB_SMBUS_REG3C 0x03C // Interrupt Line - R +#define SB_SMBUS_REG3D 0x03D // Interrupt Pin - R +#define SB_SMBUS_REG3E 0x03E // Min_Gnt - R +#define SB_SMBUS_REG3F 0x03F // Max_Lat - R +#define SB_SMBUS_REG40 0x040 // PCI Control- RW +#define SB_SMBUS_REG41 0x041 // MiscFunction- RW +#define SB_SMBUS_REG42 0x042 // DmaLimit- RW +#define SB_SMBUS_REG43 0x043 // DmaEnanceEnable RW +#define SB_SMBUS_REG48 0x048 // ISA Address Decode Control Register #1- RW +#define SB_SMBUS_REG49 0x049 // ISA Address Decode Control Register #2- RW +#define SB_SMBUS_REG4A 0x04A // Scratc Pad- RW +#define SB_SMBUS_REG50 0x050 // PciGpioOutControl- RW +#define SB_SMBUS_REG54 0x054 // PciGpioConfig- RW +#define SB_SMBUS_REG58 0x058 // ASFSMBusIoBase +#define SB_SMBUS_REG59 0x059 //; +#define SB_SMBUS_REG5C 0x05C // Smart Power Control1 +#define SB_SMBUS_REG60 0x060 // MiscEnable- RW +#define SB_SMBUS_REG64 0x064 // Features Enable- RW +#define SB_SMBUS_REG68 0x068 // UsbEnable - RW +#define SB_SMBUS_REG6C 0x06C // TestMode- RW +#define SB_SMBUS_REG70 0x070 // RunTimeTest- R +#define SB_SMBUS_REG74 0x074 // IoApic_Conf- RW +#define SB_SMBUS_REG78 0x078 // IoAddrEnable - R/W +#define SB_SMBUS_REG79 0x079 //; +#define SB_SMBUS_REG7C 0x07C // RTC Control ;VSJ-2005-06-16 +#define SB_SMBUS_REG80 0x080 // GPIO_Out_Cntrl - RW +#define SB_SMBUS_REG81 0x081 // GPIO_Status - R +#define SB_SMBUS_REG90 0x090 // Smbus Base Address - R +#define SB_SMBUS_REG94 0x094 // Reserved - R +#define SB_SMBUS_REG98 0x098 // +#define SB_SMBUS_REGA0 0x0A0 // MoreGPIOIn +C R +#define SB_SMBUS_REGA4 0x0A4 // MoreGPIOIn +C R +#define SB_SMBUS_REGA8 0x0A8 // GPIOControl +C RW +#define SB_SMBUS_REGAC 0x0AC // MiscUsbEt - RW +#define SB_SMBUS_REGAD 0x0AD // MiscSata +#define SB_SMBUS_REGAE 0x0AE +#define SB_SMBUS_REGAF 0x0AF // SataIntMap - RW +#define SB_SMBUS_REGB0 0x0B0 // MSI Mapping Capability - R +#define SB_SMBUS_REGB4 0x0B4 //HPET BASE Address +#define SB_SMBUS_REGBC 0x0BC // PciIntGpio - RW +#define SB_SMBUS_REGBE 0x0BE // UsbIntMap - RW +#define SB_SMBUS_REGC0 0x0C0 // IokHiDrvSt - RW +#define SB_SMBUS_REGD0 0x0D0 // +#define SB_SMBUS_REGD2 0x0D2 // I2CbusConfig - RW +#define SB_SMBUS_REGD3 0x0D3 // I2CCommand - RW +#define SB_SMBUS_REGD4 0x0D4 // I2CSadow1- RW +#define SB_SMBUS_REGD5 0x0D5 // I2Csadow2- RW +#define SB_SMBUS_REGD6 0x0D6 // I2CBusRevision - RW +#define SB_SMBUS_REGE0 0x0E0 // MSI_Weigt +#define SB_SMBUS_REGE1 0x0E1 // MSI_Weigt +#define SB_SMBUS_REGF0 0x0F0 // AB_REG_BAR - RW +#define SB_SMBUS_REGF1 0x0F1 +#define SB_SMBUS_REGF4 0x0F4 // WakeIoAddr- RW +#define SB_SMBUS_REGF8 0x0F8 // ExtendedAddrPort- RW +#define SB_SMBUS_REGFC 0x0FC // ExtendedDataPort- RW + + +#define SB_IDE_REG00 0x00 // Vendor ID +#define SB_IDE_REG02 0x02 // Device ID +#define SB_IDE_REG04 0x04 // Command +#define SB_IDE_REG06 0x06 // Status +#define SB_IDE_REG08 0x08 // Revision ID/Class Code +#define SB_IDE_REG09 0x09 // Class Code +#define SB_IDE_REG0A 0x0A +#define SB_IDE_REG0C 0x0C // Cace Link Size +#define SB_IDE_REG0D 0x0D // Master Latency Timer +#define SB_IDE_REG0E 0x0E // eader Type +#define SB_IDE_REG0F 0x0F // BIST Mode Type +#define SB_IDE_REG10 0x10 // Base Address 0 +#define SB_IDE_REG14 0x14 // Base Address 1 +#define SB_IDE_REG18 0x18 // Base Address 2 +#define SB_IDE_REG1C 0x1C // Base Address 3 +#define SB_IDE_REG20 0x20 // Bus Master Interface Base Address +#define SB_IDE_REG2C 0x2C // Subsystem ID and Subsystem Vendor ID +#define SB_IDE_REG34 0x34 // MSI Capabilities Pointer +#define SB_IDE_REG3C 0x3C // Interrupt Line +#define SB_IDE_REG3D 0x3D // Interrupt Pin +#define SB_IDE_REG3E 0x3E // Min_gnt +#define SB_IDE_REG3F 0x3F // Max_latency +#define SB_IDE_REG40 0x40 // IDE PIO Timing +#define SB_IDE_REG44 0x44 // IDE Legacy DMA (Multi-words DMA) Timing Modes +#define SB_IDE_REG48 0x48 // IDE PIO Control +#define SB_IDE_REG4A 0x4A // IDE PIO Mode +#define SB_IDE_REG4C 0x4C // IDE Status +#define SB_IDE_REG54 0x54 // IDE Ultra DMAControl +#define SB_IDE_REG55 0x55 // IDE Ultra DMA Status +#define SB_IDE_REG56 0x56 // IDE Ultra DMA Mode +#define SB_IDE_REG60 0x60 // IDE PCI Retry Timing Counter +#define SB_IDE_REG61 0x61 // PCI Error Control +#define SB_IDE_REG62 0x62 // IDE Internal Control +#define SB_IDE_REG63 0x63 // IDE Internal Control +#define SB_IDE_REG64 0x64 // IDE PLL Control +#define SB_IDE_REG68 0x68 // IDE MSI Programmable Weigt +#define SB_IDE_REG6C 0x6C // IDE Dynamic Clocking +#define SB_IDE_REG70 0x70 // IDE MSI Control +#define SB_IDE_REG74 0x74 // IDE MSI Address Register +#define SB_IDE_REG78 0x78 // IDE MSI Data Register + + +#define SB_AZ_REG00 0x00 // Vendor ID - R +#define SB_AZ_REG02 0x02 // Device ID - R/W +#define SB_AZ_REG04 0x04 // PCI Command +#define SB_AZ_REG06 0x06 // PCI Status - R/W +#define SB_AZ_REG08 0x08 // Revision ID +#define SB_AZ_REG09 0x09 // Programming Interface +#define SB_AZ_REG0A 0x0A // Sub Class Code +#define SB_AZ_REG0B 0x0B // Base Class Code +#define SB_AZ_REG0C 0x0C // Cace Line Size - R/W +#define SB_AZ_REG0D 0x0D // Latency Timer +#define SB_AZ_REG0E 0x0E // eader Type +#define SB_AZ_REG0F 0x0F // BIST +#define SB_AZ_REG10 0x10 // Lower Base Address Register +#define SB_AZ_REG14 0x14 // Upper Base Address Register +#define SB_AZ_REG2C 0x2C // Subsystem Vendor ID +#define SB_AZ_REG2D 0x2D // Subsystem ID +#define SB_AZ_REG34 0x34 // Capabilities Pointer +#define SB_AZ_REG3C 0x3C // Interrupt Line +#define SB_AZ_REG3D 0x3D // Interrupt Pin +#define SB_AZ_REG3E 0x3E // Minimum Grant +#define SB_AZ_REG3F 0x3F // Maximum Latency +#define SB_AZ_REG40 0x40 // Misc Control 1 +#define SB_AZ_REG42 0x42 // Misc Control 2 Register +#define SB_AZ_REG43 0x43 // Misc Control 3 Register +#define SB_AZ_REG44 0x44 // Interrupt Pin Control Register +#define SB_AZ_REG46 0x46 // Debug Control Register +#define SB_AZ_REG4C 0x4C +#define SB_AZ_REG50 0x50 // Power Management Capability ID +#define SB_AZ_REG52 0x52 // Power Management Capabilities +#define SB_AZ_REG54 0x54 // Power Management Control/Status +#define SB_AZ_REG60 0x60 // MSI Capability ID +#define SB_AZ_REG62 0x62 // MSI Message Control +#define SB_AZ_REG64 0x64 // MSI Message Lower Address +#define SB_AZ_REG68 0x68 // MSI Message Upper Address +#define SB_AZ_REG6C 0x6C // MSI Message Data + +#define SB_AZ_BAR_REG00 0x00 // Global Capabilities - R +#define SB_AZ_BAR_REG02 0x02 // Minor Version - R +#define SB_AZ_BAR_REG03 0x03 // Major Version - R +#define SB_AZ_BAR_REG04 0x04 // Output Payload Capability - R +#define SB_AZ_BAR_REG06 0x06 // Input Payload Capability - R +#define SB_AZ_BAR_REG08 0x08 // Global Control - R/W +#define SB_AZ_BAR_REG0C 0x0C // Wake Enable - R/W +#define SB_AZ_BAR_REG0E 0x0E // State Cange Status - R/W +#define SB_AZ_BAR_REG10 0x10 // Global Status - R/W +#define SB_AZ_BAR_REG18 0x18 // Output Stream Payload Capability - R +#define SB_AZ_BAR_REG1A 0x1A // Input Stream Payload Capability - R +#define SB_AZ_BAR_REG20 0x20 // Interrupt Control - R/W +#define SB_AZ_BAR_REG24 0x24 // Interrupt Status - R/W +#define SB_AZ_BAR_REG30 0x30 // Wall Clock Counter - R +#define SB_AZ_BAR_REG38 0x38 // Stream Syncronization - R/W +#define SB_AZ_BAR_REG40 0x40 // CORB Lower Base Address - R/W +#define SB_AZ_BAR_REG44 0x44 // CORB Upper Base Address - RW +#define SB_AZ_BAR_REG48 0x48 // CORB Write Pointer - R/W +#define SB_AZ_BAR_REG4A 0x4A // CORB Read Pointer - R/W +#define SB_AZ_BAR_REG4C 0x4C // CORB Control - R/W +#define SB_AZ_BAR_REG4D 0x4D // CORB Status - R/W +#define SB_AZ_BAR_REG4E 0x4E // CORB Size - R/W +#define SB_AZ_BAR_REG50 0x50 // RIRB Lower Base Address - RW +#define SB_AZ_BAR_REG54 0x54 // RIRB Upper Address - RW +#define SB_AZ_BAR_REG58 0x58 // RIRB Write Pointer - RW +#define SB_AZ_BAR_REG5A 0x5A // RIRB Response Interrupt Count - R/W +#define SB_AZ_BAR_REG5C 0x5C // RIRB Control - R/W +#define SB_AZ_BAR_REG5D 0x5D // RIRB Status - R/W +#define SB_AZ_BAR_REG5E 0x5E // RIRB Size - R/W +#define SB_AZ_BAR_REG60 0x60 // Immediate Command Output Interface - R/W +#define SB_AZ_BAR_REG64 0x64 // Immediate Command Input Interface - R/W +#define SB_AZ_BAR_REG68 0x68 // Immediate Command Input Interface - R/W +#define SB_AZ_BAR_REG70 0x70 // DMA Position Lower Base Address - R/W +#define SB_AZ_BAR_REG74 0x74 // DMA Position Upper Base Address - R/W +#define SB_AZ_BAR_REG2030 0x2030 // Wall Clock Counter Alias - R + + +#define SB_LPC_REG00 0x00 // VID- R +#define SB_LPC_REG02 0x02 // DID- R +#define SB_LPC_REG04 0x04 // CMD- RW +#define SB_LPC_REG06 0x06 // STATUS- RW +#define SB_LPC_REG08 0x08 // Revision ID/Class Code - R +#define SB_LPC_REG0C 0x0C // Cace Line Size - R +#define SB_LPC_REG0D 0x0D // Latency Timer - R +#define SB_LPC_REG0E 0x0E // eader Type - R +#define SB_LPC_REG0F 0x0F // BIST- R +#define SB_LPC_REG10 0x10 // Base Address Reg 0- RW* +#define SB_LPC_REG2C 0x2C // Subsystem ID & Subsystem Vendor ID - Wo/Ro +#define SB_LPC_REG34 0x34 // Capabilities Pointer - Ro +#define SB_LPC_REG40 0x40 // PCI Control - RW +#define SB_LPC_REG44 0x44 // IO Port Decode Enable Register 1- RW +#define SB_LPC_REG45 0x45 // IO Port Decode Enable Register 2- RW +#define SB_LPC_REG46 0x46 // IO Port Decode Enable Register 3- RW +#define SB_LPC_REG47 0x47 // IO Port Decode Enable Register 4- RW +#define SB_LPC_REG48 0x48 // IO/Mem Port Decode Enable Register 5- RW +#define SB_LPC_REG49 0x49 // LPC Sync Timeout Count - RW +#define SB_LPC_REG4A 0x4A // IO/Mem Port Decode Enable Register 6- RW +#define SB_LPC_REG4C 0x4C // Memory Range Register - RW +#define SB_LPC_REG50 0x50 // Rom Protect 0 - RW +#define SB_LPC_REG54 0x54 // Rom Protect 1 - RW +#define SB_LPC_REG58 0x58 // Rom Protect 2 - RW +#define SB_LPC_REG5C 0x5C // Rom Protect 3 - RW +#define SB_LPC_REG60 0x60 // PCI Memory Start Address of LPC Target Cycles - +#define SB_LPC_REG62 0x62 // PCI Memory End Address of LPC Target Cycles - +#define SB_LPC_REG64 0x64 // PCI IO base Address of Wide Generic Port - RW +#define SB_LPC_REG65 0x65 +#define SB_LPC_REG66 0x66 +#define SB_LPC_REG67 0x67 +#define SB_LPC_REG68 0x68 // LPC ROM Address Range 1 (Start Address) - RW +#define SB_LPC_REG69 0x69 +#define SB_LPC_REG6A 0x6A // LPC ROM Address Range 1 (End Address) - RW +#define SB_LPC_REG6B 0x6B +#define SB_LPC_REG6C 0x6C // LPC ROM Address Range 2 (Start Address)- RW +#define SB_LPC_REG6D 0x6D +#define SB_LPC_REG6E 0x6E // LPC ROM Address Range 2 (End Address) - RW +#define SB_LPC_REG6F 0x6F +#define SB_LPC_REG70 0x70 // Firmware ub Select - RW* +#define SB_LPC_REG71 0x71 +#define SB_LPC_REG72 0x72 +#define SB_LPC_REG73 0x73 +#define SB_LPC_REG74 0x74 // Alternative Wide IO Range Enable- W/R +#define SB_LPC_REG78 0x78 // Miscellaneous Control Bits- W/R +#define SB_LPC_REG7C 0x7C // TPM (trusted plant form module) reg- W/R +#define SB_LPC_REG9C 0x9C +#define SB_LPC_REG80 0x80 // MSI Capability Register- R +#define SB_LPC_REG8C 0x8C +#define SB_LPC_REGA0 0x0A0 // SPI base address +#define SB_LPC_REGA1 0x0A1 // SPI base address +#define SB_LPC_REGA2 0x0A2 // SPI base address +#define SB_LPC_REGA3 0x0A3 // SPI base address +#define SB_LPC_REGA4 0x0A4 +#define SB_LPC_REGB8 0x0B8 +#define SB_LPC_REGBA 0x0BA // EcControl +#define SB_LPC_REGBB 0x0BB // HostControl + + +#define SB_P2P_REG00 0x00 // VID - R +#define SB_P2P_REG02 0x02 // DID - R +#define SB_P2P_REG04 0x04 // CMD- RW +#define SB_P2P_REG06 0x06 // STATUS- RW +#define SB_P2P_REG08 0x08 // Revision ID/Class Code- R +#define SB_P2P_REG0C 0x0C // CSIZE- RW +#define SB_P2P_REG0D 0x0D // LTIMER- RW +#define SB_P2P_REG0E 0x0E // TYPE- R +#define SB_P2P_REG18 0x18 // PBN- RW +#define SB_P2P_REG19 0x19 // SBN- RW +#define SB_P2P_REG1A 0x1A // SUBBN- RW +#define SB_P2P_REG1B 0x1B // SLTIMER- RW +#define SB_P2P_REG1C 0x1C // IOBASE- RW +#define SB_P2P_REG1D 0x1D // IOLMT- RW +#define SB_P2P_REG1E 0x1E // SSTATUS- RW +#define SB_P2P_REG20 0x20 // MBASE- RW +#define SB_P2P_REG21 0x21 +#define SB_P2P_REG22 0x22 // MLMT- RW +#define SB_P2P_REG23 0x23 +#define SB_P2P_REG24 0x24 // PMBASE- RW +#define SB_P2P_REG25 0x25 +#define SB_P2P_REG26 0x26 // PMLMT- RW +#define SB_P2P_REG27 0x27 +#define SB_P2P_REG30 0x30 // IOBU16- RW +#define SB_P2P_REG32 0x32 // IOLU16- RW +#define SB_P2P_REG34 0x34 // ECP_PTR- R +#define SB_P2P_REG3C 0x3C // INTLN- RW +#define SB_P2P_REG3D 0x3D // INTPN- R +#define SB_P2P_REG3E 0x3E // BCTRL- RW +#define SB_P2P_REG40 0x40 // CPCTRL- R/W +#define SB_P2P_REG41 0x41 // DCTRL- RW +#define SB_P2P_REG42 0x42 // CLKCTRL- R/W +#define SB_P2P_REG43 0x43 // ARCTRL- RW +#define SB_P2P_REG44 0x44 // SMLT_PERF- RW +#define SB_P2P_REG46 0x46 // PMLT_PERF- RW +#define SB_P2P_REG48 0x48 // PCDMA- RW +#define SB_P2P_REG49 0x49 // Additional Priority- Bits RW +#define SB_P2P_REG4A 0x4A // PCICLK Enable- Bits RW +#define SB_P2P_REG4B 0x4B // Misc Control RW +#define SB_P2P_REG4C 0x4C // AutoClockRun control RW +#define SB_P2P_REG50 0x50 // Dual Address Cycle Enable and PCIB_CLK_Stop +#define SB_P2P_REG54 0x54 // MSI Mapping Capability +#define SB_P2P_REG58 0x58 // Signature Register of Microsoft Rework +#define SB_P2P_REG64 0x64 // Misc Control Register +#define SB_P2P_REG65 0x65 // Misc Control Register + +#define SB_PMIO2_REG00 0x00 +#define SB_PMIO2_REG01 0x01 +#define SB_PMIO2_REG31 0x31 +#define SB_PMIO2_REG32 0x32 +#define SB_PMIO2_REG33 0x33 +#define SB_PMIO2_REG34 0x34 +#define SB_PMIO2_REG35 0x35 +#define SB_PMIO2_REG36 0x36 +#define SB_PMIO2_REG37 0x37 +#define SB_PMIO2_REG38 0x38 +#define SB_PMIO2_REG39 0x39 +#define SB_PMIO2_REG3A 0x3A +#define SB_PMIO2_REG3B 0x3B +#define SB_PMIO2_REG3C 0x3C +#define SB_PMIO2_REG3D 0x3D +#define SB_PMIO2_REG3E 0x3E +#define SB_PMIO2_REG3F 0x3F +#define SB_PMIO2_REG40 0x40 +#define SB_PMIO2_REG41 0x41 +#define SB_PMIO2_REG42 0x42 +#define SB_PMIO2_REG43 0x43 +#define SB_PMIO2_REG44 0x44 +#define SB_PMIO2_REG45 0x45 +#define SB_PMIO2_REG46 0x46 +#define SB_PMIO2_REG47 0x47 +#define SB_PMIO2_REG48 0x48 +#define SB_PMIO2_REG49 0x49 +#define SB_PMIO2_REG54 0x54 +#define SB_PMIO2_REG58 0x58 +#define SB_PMIO2_REG59 0x59 +#define SB_PMIO2_REG5A 0x5A +#define SB_PMIO2_REG5B 0x5B +#define SB_PMIO2_REG5C 0x5C +#define SB_PMIO2_REG70 0x70 +#define SB_PMIO2_REGE5 0xE5 + +#define SB_SPI_MMIO_REG0C 0x0C //SPI_Cntrl1 Register + + +//Bus 0 Device 0x18 Function 0 HyperTransfer +//Link Frequency/Revision Register 0x88/0xA8/0xC8/0xE8 - 32 bits. +#define HT_LINK_REG89 0x89 +#define HT_LINK_REGA9 0xA9 +#define HT_LINK_REGC9 0xC9 +#define HT_LINK_REGE9 0xE9 + +//Link Type Register 0x98/0xB8/0xD8/0xF8 - 32 bits. +#define HT_LINK_REG98 0x98 +#define HT_LINK_REGB8 0xB8 +#define HT_LINK_REGD8 0xD8 +#define HT_LINK_REGF8 0xF8 + +//Link Frequency Extension Register 0x9C/0xBC/0xDC/0xFC - 32 bits. +#define HT_LINK_REG9C 0x9C +#define HT_LINK_REGBC 0xBC +#define HT_LINK_REGDC 0xDC +#define HT_LINK_REGFC 0xFC + +//DRAM CS Base Address Register D18F2x40/x48/x50/x58 +#define DCT_REG40 0x40 +#define DCT_REG48 0x48 +#define DCT_REG50 0x50 +#define DCT_REG58 0x58 + +//DRAM Configuration Low Register D18F2x90/x91/x92/x93 +#define DCT_REG90 0x90 +#define DCT_REG91 0x91 +#define DCT_REG92 0x92 +#define DCT_REG93 0x93 + +#pragma pack(pop) + +#endif //#ifndef _AMD_SB700_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SBCMN.c b/src/vendorcode/amd/cimx/sb700/SBCMN.c new file mode 100644 index 0000000000..7d5b4f4a74 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SBCMN.c @@ -0,0 +1,572 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + + +REG8MASK sbEarlyPostByteInitTable[]={ + // SMBUS Device(Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make BAR registers of smbus visible. + {SB_SMBUS_REG24, 0X00, (CIMx_Version & 0xFF)}, //Program the version information + {SB_SMBUS_REG24+1, 0x00, (CIMx_Version >> 8)}, + {SB_SMBUS_REG24+2, 0x00, RC_Information}, + {SB_SMBUS_REG24+3, 0x00, Additional_Changes_Indicator}, + {SB_SMBUS_REG43, ~(UINT8)BIT3, BIT3}, //Make BAR registers of smbus invisible. + {SB_SMBUS_REGAE, ~(UINT8)(BIT6 + BIT5), BIT6 + BIT5}, //Disable Timer IRQ enhancement for proper operation of the 8254 timer. + // [6] - IoApicPicArbEn, set 1 to enable arbiter between APIC and PIC interrupts + {SB_SMBUS_REGAD, ~(UINT8)(BIT0+BIT1+BIT2+BIT4), BIT0+BIT3}, // Initialize SATA to default values, SATA Enabled, + // Combined mode enabled, SATA as primary, power saving enable + {SB_SMBUS_REGAF, 0xE3, 6 << 2}, // Set SATA Interrupt to INTG# + {SB_SMBUS_REG68, BIT3, 0 }, // First disable all usb controllers and then enable then according to setup selection + {0xFF, 0xFF, 0xFF}, + + // IDE Device(Bus 0, Dev 20, Func 1) + {0x00, IDE_BUS_DEV_FUN, 0}, + {SB_IDE_REG62+1, ~(UINT8)BIT0, BIT5}, // Enabling IDE Explicit Pre-Fetch IDE PCI Config 0x62[8]=0 + // Allow MSI capability of IDE controller to be visible. IDE PCI Config 0x62[13]=1 + {0xFF, 0xFF, 0xFF}, + + // Azalia Device(Bus 0, Dev 20, Func 2) + {0x00, AZALIA_BUS_DEV_FUN, 0}, + {SB_AZ_REG4C, ~(UINT8)BIT0, BIT0}, + {0xFF, 0xFF, 0xFF}, + + // LPC Device(Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + + {SB_LPC_REG40, ~(UINT8)BIT2, BIT2}, // Enabling LPC DMA Function 0x40[2] + {SB_LPC_REG78, ~(UINT8)BIT1, 00}, // Disables MSI capability + {0xFF, 0xFF, 0xFF}, + + // P2P Bridge(Bus 0, Dev 20, Func 4) + {0x00, SBP2P_BUS_DEV_FUN, 0}, + + {SB_P2P_REG64+1, 0xFF, BIT7+BIT6}, //Adjusting CLKRUN#, PCIB_PCI_Config 0x64[15]=01 + //Enabling arbiter fix, PCIB_PCI_Config 0x64[14]=01 + {SB_P2P_REG64+2, 0xFF, BIT4}, //Enabling One-Prefetch-Channel Mode, PCIB_PCI_config 0x64 [20] + + {SB_P2P_REG0D, 0x00, 0x40}, //Setting Latency Timers to 0x40, Enables the PCIB to retain ownership + {SB_P2P_REG1B, 0x00, 0x40}, // of the bus on the Primary side and on the Secondary side when GNT# is deasserted. + + {0xFF, 0xFF, 0xFF}, + + // SATA Device(Bus 0, Dev 17, Func 0) + {0x00, SATA_BUS_DEV_FUN, 0}, + {SB_SATA_REG44, 0xff, BIT0}, // Enables the SATA watchdog timer register prior to the SATA BIOS post + {SB_SATA_REG40+3, 0xff, BIT5}, // RPR setting: Disable the testing/enhancement mode SATA_PCI_config 0x40 [29] = 1 + {SB_SATA_REG48+2, 0xff, BIT5}, // RPR setting: Disable the testing/enhancement mode SATA_PCI_config 0x48 [24] = 1, [21] = 1 + {SB_SATA_REG48+3, 0xff, BIT0}, + {SB_SATA_REG44 + 2, 0, 0x10}, // Program watchdog timer with 16 retries before timer time-out. + {0xFF, 0xFF, 0xFF}, +}; + + +REG8MASK sbEarlyPostPmioInitTbl[]={ + // index andmask ormask + {SB_PMIO_REG55, ~(UINT8)(BIT3+BIT4+BIT5), BIT5+BIT3}, //BIT3(PcieNative)=1b, BIT4(Pcie_Wak_Mask)=0b, BIT5(Pcie_WAK_Sci)=1b + {SB_PMIO_REG01, 0xff, BIT1}, + {SB_PMIO_REG0E, 0xff, BIT2 + BIT3}, + {SB_PMIO_REG10, 0x3E, (BIT6+BIT5+BIT3+BIT1)}, // RTC_En_En + TMR_En_En + GLB_EN_EN and clear EOS_EN + PciExpWakeDisEn + {SB_PMIO_REG61, 0xFF, 0x40}, // USB Device Support to Wakeup System from S3/S4 state, USB PME & PCI Act from NB + {SB_PMIO_REG59, 0xFC, 0x00 }, // Clear the flash controller bits BIT1:0 + {SB_PMIO_REG01, 0xFF, 0x97 }, // Clear all the status + {SB_PMIO_REG05, 0xFF, 0xFF }, + {SB_PMIO_REG06, 0xFF, 0xFF }, + {SB_PMIO_REG07, 0xFF, 0xFF }, + {SB_PMIO_REG0F, 0xFF, 0x1F }, + {SB_PMIO_REG1D, 0xFF, 0xFF }, + {SB_PMIO_REG39, 0xFF, 0xFF }, + {SB_PMIO_REG7C, ~(UINT8)(BIT5+BIT3+BIT2), BIT3+BIT2}, //Turn on BLink LED + {SB_PMIO_REG67, 0xFF, 0x06}, // C State enable, must be set in order to exercise C state + {SB_PMIO_REG68, 0x38, 0x84}, + {SB_PMIO_REG8D, 0xFF, 0x01}, // Set PM_Reg_0x8D[0] to enable PmeTurnOff/PmeMsgAck handshake to fix PCIE LAN S3/S4 wake failure + {SB_PMIO_REG84, 0xFD, BIT3+BIT0}, + {SB_PMIO_REG53, 0xFF, BIT7+BIT6}, //ACPI System Clock setting, PMIO Reg 0x53[6]=1. Our reference clock + //is either 25 or 100Mhz and so the default acpi clock is actually + //running at 12.5Mhz and so the system time will run slow. We have + //generated another internal clock which runs at 14.318Mhz which is the + //correct frequency. We should set this bit to turn on this feature PMIO_REG53[6]=1 + //PCI Clock Period, PM_IO 0x53 [7] = 1. By setting this, PCI clock period + //increase to 30.8 ns. + {SB_PMIO_REG95, ~(UINT8)(BIT2+BIT1+BIT0), BIT2+BIT1}, //USB Advanced Sleep Control, Enables USB EHCI controller + //to sleep for 6 uframes in stead of the standard 10us to + //improve power saving. + {SB_PMIO_REGD7, 0xFF, BIT6+BIT1}, + +}; + + +// commonInitEarlyBoot - set /SMBUS/ACPI/IDE/LPC/PCIB. This settings should be done during S3 resume also +void commonInitEarlyBoot(AMDSBCFG* pConfig) { + UINT16 dwTempVar; + CPUID_DATA CpuId; + CPUID_DATA CpuId_Brand; + UINT8 dbValue; + UINT32 ddValue; + UINT8 Family, Model, Stepping; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering commonInitEarlyBoot \n")); + CpuidRead (0x01, &CpuId); + CpuidRead (0x80000001, &CpuId_Brand); //BrandID + + //Early post initialization of pci config space + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbEarlyPostByteInitTable[0]), sizeof(sbEarlyPostByteInitTable)/sizeof(REG8MASK) ); + + // RPR 5.5 Clear PM_IO 0x65[4] UsbResetByPciRstEnable, Set this bit so that usb gets reset whenever there is PCIRST. + RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT4, BIT4); + + + #if 0 //KZ [083011]-It's used wrong BIOS SIZE for Coreboot. + //For being compatible with earlier revision, check whether ROM decoding is changed already outside CIMx before + //changing it. + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG68, AccWidthUint16 | S3_SAVE, &dwTempVar); + if ( (dwTempVar == 0x08) || (dwTempVar == 0x00)) + RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG68, AccWidthUint8 | S3_SAVE, 0, 0x0E);// Change the 1Mb below ROM decoding range to 0xE0000 to 0xFFFFF + #endif + + if (pConfig->AzaliaController == 1) + RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 0); + else + RWPMIO(SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + + //Disable or Enable PCI Clks based on input + RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG42, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT5+BIT4+BIT3+BIT2), ((pConfig->PciClks) & 0x0F) << 2 ); + RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG4A, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), ((pConfig->PciClks) >> 4) | ((pConfig->PciClk5) << 1) ); + ReadPMIO(SB_PMIO_REG2C, AccWidthUint16, &dwTempVar); // Read Arbiter address, Arbiter address is in PMIO 2Ch + RWIO(dwTempVar, AccWidthUint8, 0, 0); // Write 0 to enable the arbiter + + abLinkInitBeforePciEnum(pConfig); // Set ABCFG registers + // Set LDTSTP# duration to 10us for HydraD CPU model 8, 9 or A; or when HT link is 200MHz; or Family15 Orochi CPU C32/G34 package + ddValue = CpuId.REG_EAX & 0x00FF00F0; + dbValue = 1; + + if((CpuId.REG_EAX & 0x00F00F00) == 0x00600F00) { + if(((CpuId_Brand.REG_EBX & 0xF0000000) == 0x30000000) || ((CpuId_Brand.REG_EBX & 0xF0000000) == 0x50000000)) { + //Orochi processor G34/C32, set to 10us + dbValue = 10; + } + else { + // Orochi processor AM3, set to 5us + dbValue = 5; + } + } + + if ((pConfig->AnyHT200MhzLink) || (ddValue == 0x100080) || (ddValue == 0x100090) || (ddValue == 0x1000A0)) { + //any kind of CPU run HT at 200Mhz , or HydraD CPU model 8, 9 or A, set to 10us + dbValue = 10; + } + + + RWPMIO(SB_PMIO_REG8B, AccWidthUint8 | S3_SAVE, 0x00, dbValue); + + // Enable/Disable watchdog timer + RWPMIO(SB_PMIO_REG69, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, (UINT8)(!pConfig->WatchDogTimerEnable)); + + // Per SB700/SP5100 RPR 2.5 + // + // Enable C1e stutter timer for any system with chip revision >= A14 + // Set SMBUS:0x5c[22:16] = 16 -- Set amount of idle time to 16ms + // + + if (getRevisionID() >= SB700_A14) { + dwTempVar = 0x0010; + + // Set PMIO:0xcb[5] = 1 -- AutoStutterTimerEn, set 1 to enable + // Set PMIO:0xcb[6] = 1 -- AutoStutterTimeSel, 1=1ms timer tick increment; 0=2us increment + RWPMIO(SB_PMIO_REGCB, AccWidthUint8 | S3_SAVE, 0xff, BIT6 + BIT5); + + Family = (UINT8)((CpuId.REG_EAX & 0x00ff0000)>> 16); + Model = (UINT8)((CpuId.REG_EAX & 0x000000f0)>> 4); + Stepping = (UINT8) (CpuId.REG_EAX & 0x0000000f); + + // For Server system (SP5100) with CPU type = Family 10h with LS2 mode enabled: + // Model=6 && Stepping=2 || Model=(4I5|6) && Stepping >=3 || Model=(8|9) && Stepping >= 1 || Model Ah + // Set SMBUS:0x5c[22:16] = 20 -- Set amount of idle time to 20ms + if (IsLs2Mode() && (Family == 0x10)) { + switch( Model ){ + case 0x4: + case 0x5: + if( Stepping >= 3 ) dwTempVar = 0x14; + break; + case 0x6: + if( Stepping >= 2 ) dwTempVar = 0x14; + break; + case 0x8: + if( Stepping >= 1 ) dwTempVar = 0x14; + break; + case 0x9: + if( Stepping >= 1 ) dwTempVar = 0x14; + break; + case 0xA: + dwTempVar = 0x14; + break; + } + } + // Set SMBUS:0x5c[7] = 1 -- CheckC3, set 1 to check for C3 state + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG5C, AccWidthUint32 | S3_SAVE, ~(0x7F << 16), (dwTempVar << 16) + BIT7); + } + + //Message-Triggered C1E is not supported in Family 10h G34r1 HY-D0 (0x00100F90) and Family 10h C32 HY-D0 (0x00100F80) processor. + ddValue = CpuId.REG_EAX; + if ((getRevisionID() == SB700_A15) && (pConfig->MTC1e == CIMX_OPTION_ENABLED) && (ddValue != 0x00100F90) && (ddValue != 0x00100F80)) { + // + // MTC1e: For A15 (server only) - The settings here borrow the existing legacy ACPI BM_STS and BM_RLD bits as a + // mechanism to break out from C1e under a non-OS controlled C3 state. Under this scheme, the logic will automatically + // clear the BM_STS bit whenever it enters C1e state. Whenever BM_REQ#/IDLE_EXIT# is detected, it will cause the + // BM_STS bit to be set and therefore causing the C state logic to exit. + // + // Set BMReqEnable (SMBUS:0x64[5]=1) to enable the pin as BM_REQ#/IDLE_EXIT# to the C state logic + // Set CheckOwnReq (SMBUS:0x64[4]=0) to force IDLE_EXIT# to set BM_STS and wake from C3 + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, 0xEF, BIT5); + + // Set PCI_Active_enable (PMIO:0x61[2]=1), the secondary enable bit for SB to monitor BM_REQ#/IDLE_EXIT# + RWPMIO(SB_PMIO_REG61, AccWidthUint8 | S3_SAVE, 0xff, BIT2); + + // Set auto_bm_rld (PMIO:0x9a[4]=1) so that assertion on BM_REQ#/IDLE_EXIT# pin will cause C state logic to break out from C1e + // Set auto_clr_bm_sts (PMIO:0x9a[5]=1) will cause the C state logic to automatically clear the BM_STS bit whenever it sees a C1e entry + RWPMIO(SB_PMIO_REG9A, AccWidthUint8 | S3_SAVE, 0xff, BIT5 + BIT4); + + + // MTC1e: The logic basically counts the number of HALT_ENTER messages. When it has received the number of HALT_ENTER + // messages equal to NumOfCpu (PMIO:0xc9[3:0]), it will generate an internal C1e command to the C state logic. + // The count increments when it sees HALT_ENTER message after it has generated the C1e command, and it treats the + // HALT_EXIT message as a break event. + // + // Set ServerCEn + RWPMIO(SB_PMIO_REGBB, AccWidthUint8 | S3_SAVE, 0xFF, BIT7); + + // Enable counting HALT + // PMIO:0xc9[4] = CountHaltMsgEn + // PMIO:0xc9[3:0] = NumOfCpu, set to 1 since CPU logic will coordinate among cores and only generate one HALT message + RWPMIO(SB_PMIO_REGC9, AccWidthUint8 | S3_SAVE, 0xE0, BIT4 + 1); + } + + c3PopupSetting(pConfig); + + TRACE((DMSG_SB_TRACE, "CIMx - Exiting commonInitEarlyBoot \n")); +} + + +void commonInitEarlyPost(AMDSBCFG* pConfig){ + //early post initialization of pmio space + programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbEarlyPostPmioInitTbl[0]), (sizeof(sbEarlyPostPmioInitTbl)/sizeof(REG8MASK)) ); + CallBackToOEM(PULL_UP_PULL_DOWN_SETTINGS, NULL, pConfig); +} + + +// AB-Link Configuration Table +ABTBLENTRY abTblEntry600[]={ + // Enabling Downstream Posted Transactions to Pass Non-Posted Transactions for the K8 Platform ABCFG 0x10090[8] = 1 + // ABCFG 0x10090 [16] = 1, ensures the SMI# message to be sent before the IO command is completed. The ordering of + // SMI# and IO is important for the IO trap to work properly. + {ABCFG,SB_AB_REG10090 ,BIT16+BIT8 ,BIT16+BIT8 }, + // Enabling UpStream DMA Access AXCFG: 0x04[2]=1 + {AXCFG,SB_AB_REG04 ,BIT2 ,BIT2 }, + // Setting B-Link Prefetch Mode ABCFG 0x80 [17] = 1 ABCFG 0x80 [18] = 1 + {ABCFG,SB_AB_REG80 ,BIT17+BIT18 ,BIT17+BIT18 }, + // Disable B-Link client's credit variable in downstream arbitration equation (for All Revisions) + // ABCFG 0x9C[0] = 1 Disable credit variable in downstream arbitration equation + // Enabling Additional Address Bits Checking in Downstream Register Programming + // ABCFG 0x9C[1] = 1 + {ABCFG,SB_AB_REG9C ,BIT8+BIT1+BIT0 ,BIT8+BIT1+BIT0 }, + // Enabling IDE/PCIB Prefetch for Performance Enhancement + // IDE prefetch ABCFG 0x10060 [17] = 1 ABCFG 0x10064 [17] = 1 + // PCIB prefetch ABCFG 0x10060 [20] = 1 ABCFG 0x10064 [20] = 1 + {ABCFG,SB_AB_REG10060 ,BIT17+BIT20 ,BIT17+BIT20 }, // IDE+PCIB prefetch enable + {ABCFG,SB_AB_REG10064 ,BIT17+BIT20 ,BIT17+BIT20 }, // IDE+PCIB prefetch enable + // Enabling Detection of Upstream Interrupts ABCFG 0x94 [20] = 1 + // ABCFG 0x94 [19:0] = cpu interrupt delivery address [39:20] + {ABCFG,SB_AB_REG94 ,BIT20 ,BIT20+0x00FEE }, + // Programming cycle delay for AB and BIF clock gating + // Enabling AB and BIF Clock Gating + // Enabling AB Int_Arbiter Enhancement + // Enabling Requester ID + {ABCFG,SB_AB_REG10054, 0x00FFFFFF , 0x010407FF }, + {ABCFG,SB_AB_REG98 , 0xFFFF00FF , 0x00014700 }, // Enable the requestor ID for upstream traffic ABCFG 0x98[16]=1 +// {ABCFG,SB_AB_REG54 , 0x00FF0000 , 0x01040000 }, + {ABCFG,SB_AB_REG54 , 0x00FF0000 , 0x00040000 }, + + {ABCFG,0,0,-1}, // This dummy entry is to clear ab index + {-1, -1, -1, -1 }, +}; + + +// AB-Link Configuration Table +ABTBLENTRY abTblForA15[]={ + + //SMI Reordering fix + {ABCFG, SB_AB_REG90 ,BIT21 , BIT21 }, + {ABCFG, SB_AB_REG9C ,BIT15+BIT9+BIT5 ,BIT15+BIT9+BIT5}, + + //Posted pass NP Downstream feature + {AX_INDXC, SB_AB_REG02, BIT9 ,BIT9 }, + {ABCFG, SB_AB_REG9C, BIT14+BIT13+BIT12+BIT11+BIT10+BIT7+BIT6 , BIT14+BIT13+BIT12+BIT11+BIT10+BIT7+BIT6}, + {ABCFG, SB_AB_REG1009C, BIT5+BIT4 , BIT5+BIT4}, + + //Posted pass NP upstream feature + {ABCFG, SB_AB_REG58, BIT15+BIT14+BIT13+BIT12+BIT11, BIT15+BIT14+BIT13+BIT11}, + + //64 bit Non-posted memory write support + {AX_INDXC, SB_AB_REG02, BIT10 ,BIT10 }, + + {ABCFG, SB_AB_REG10090, BIT12+BIT11+BIT10+BIT9 , BIT12+BIT11+BIT10+BIT9}, + + {ABCFG,0,0,-1}, // This dummy entry is to clear ab index + {-1, -1, -1, -1 }, +}; + + +// abLinkInitBeforePciEnum - Set ABCFG registers +void abLinkInitBeforePciEnum(AMDSBCFG* pConfig){ + ABTBLENTRY *pAbTblPtr; + + // disable PMIO decoding when AB is set + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, 0); + + pAbTblPtr = (ABTBLENTRY *)FIXUP_PTR(&abTblEntry600[0]); + abcfgTbl(pAbTblPtr); + + if (getRevisionID() > SB700_A11){ + //Enable OHCI Prefetch + writeAlink( (SB_AB_REG80 | (ABCFG << 30)), (readAlink((SB_AB_REG80 | (ABCFG << 30)))) | BIT0); + //Register bit to maintain correct ordering of SMI and IO write completion + writeAlink( (SB_AB_REG8C | (ABCFG << 30)), (readAlink((SB_AB_REG8C | (ABCFG << 30)))) | BIT8); + } + + if (getRevisionID() >= SB700_A14){ + //Enable fix for TT SB01345 + writeAlink( (SB_AB_REG90 | (ABCFG << 30)), (readAlink((SB_AB_REG90 | (ABCFG << 30)))) | BIT17); + //Disable IO Write and SMI ordering enhancement + writeAlink( (SB_AB_REG9C | (ABCFG << 30)), (readAlink((SB_AB_REG9C | (ABCFG << 30)))) & (0xFFFFFEFF)); + } + + if (getRevisionID() >= SB700_A15) { + pAbTblPtr = (ABTBLENTRY *)FIXUP_PTR(&abTblForA15[0]); + abcfgTbl(pAbTblPtr); + } + + + // enable pmio decoding after ab is configured + // or BYTE PTR es:[ebp+SMBUS_BUS_DEV_FUN shl 12 + SB_SMBUS_REG64], BIT2 + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, BIT2); +} + + +void abcfgTbl(ABTBLENTRY* pABTbl){ + UINT32 ddValue; + + while ((pABTbl->regType) != 0xFF){ + TRACE((DMSG_SB_TRACE, "RegType: %X, RegNumber:%X, AndMask=%X, OrMask=%X \n",pABTbl->regType , pABTbl->regIndex, pABTbl->regMask, pABTbl->regData)); + if (pABTbl->regType > AX_INDXP){ + ddValue = pABTbl->regIndex | (pABTbl->regType << 30); + writeAlink(ddValue, ((readAlink(ddValue)) & (0xFFFFFFFF^(pABTbl->regMask)))|pABTbl->regData); + } + else{ + ddValue = 0x30 | (pABTbl->regType << 30); + writeAlink(ddValue, pABTbl->regIndex); + ddValue = 0x34 | (pABTbl->regType << 30); + writeAlink(ddValue, ((readAlink(ddValue)) & (0xFFFFFFFF^(pABTbl->regMask)))|pABTbl->regData); + } + ++pABTbl; + } + + //Clear ALink Access Index + ddValue = 0; + WriteIO(ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &ddValue); + TRACE((DMSG_SB_TRACE, "Exiting abcfgTbl\n")); +} + + +// programSubSystemIDs - Config Subsystem ID for all SB devices. +void programSubSystemIDs(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions){ + UINT32 ddTempVar; + UINT16 dwDeviceId; + + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci0Ssid); + RWPCI((USB1_OHCI1_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci1Ssid); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci2Ssid); + RWPCI((USB2_OHCI1_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci3Ssid); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ohci4Ssid); + + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ehci0Ssid); + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->Ehci1Ssid); + + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->SmbusSsid); + RWPCI((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->IdeSsid); + RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->LpcSsid); + RWPCI((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pStaticOptions->AzaliaSsid); + + ddTempVar = pStaticOptions->SataIDESsid; + if ( ((pConfig->SataClass) == AHCI_MODE) || ((pConfig->SataClass)== IDE_TO_AHCI_MODE) ) + ddTempVar = pStaticOptions->SataAHCISsid; + + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwDeviceId); + if ((pConfig->SataClass) == RAID_MODE){ + ddTempVar = pStaticOptions->SataRAIDSsid; + if (dwDeviceId==SB750_SATA_DEFAULT_DEVICE_ID) + ddTempVar = pStaticOptions->SataRAID5Ssid; + } + + if ( ((pConfig->SataClass) == AMD_AHCI_MODE) || ((pConfig->SataClass) == IDE_TO_AMD_AHCI_MODE) ) { + ddTempVar = pStaticOptions->SataAHCISsid; + } + RWPCI((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG2C, AccWidthUint32 | S3_SAVE, 0x00, ddTempVar); +} + +void commonInitLateBoot(AMDSBCFG* pConfig){ + UINT8 dbValue; + UINT32 ddVar; + + // We need to do the following setting in late post also because some bios core pci enumeration changes these values + // programmed during early post. + // RPR 4.5 Master Latency Timer + // Master Latency Timer PCIB_PCI_config 0x0D/0x1B = 0x40 + // Enables the PCIB to retain ownership of the bus on the + // Primary side and on the Secondary side when GNT# is deasserted. + //mov BYTE PTR es:[ebp+SBP2P_BUS_DEV_FUN shl 12 + SB_P2P_REG0D], 40h + //mov BYTE PTR es:[ebp+SBP2P_BUS_DEV_FUN shl 12 + SB_P2P_REG1B], 40h + dbValue = 0x40; + WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG0D, AccWidthUint8, &dbValue); + WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG1B, AccWidthUint8, &dbValue); + + //SB P2P AutoClock control settings. + ddVar = (pConfig->PcibAutoClkCtrlLow) | (pConfig->PcibAutoClkCtrlLow); + WritePCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG4C, AccWidthUint32, &ddVar); + ddVar = (pConfig->PcibClkStopOverride); + RWPCI((SBP2P_BUS_DEV_FUN << 16) + SB_P2P_REG50, AccWidthUint16, 0x3F, (UINT16) (ddVar << 6)); + + if (pConfig->MobilePowerSavings){ + //If RTC clock is not driven to any chip, it should be shut-off. If system uses external RTC, then SB needs to + //drive out RTC clk to external RTC chip. If system uses internal RTC, then this clk can be shut off. + RWPMIO(SB_PMIO_REG68, AccWidthUint8, ~(UINT32)BIT4, (pConfig->ExternalRTCClock)<<4); + if (!getClockMode()){ + if (!(pConfig->UsbIntClock) ){ + //If the external clock is used, the second PLL should be shut down + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, 0xFF, BIT0); + // If external clock mode is used, the 25Mhz oscillator buffer can be turned-off by setting PMIO 0xD4[7]=1 + RWPMIO(SB_PMIO_REGD4, AccWidthUint8, 0xFF, BIT7); + //Disable unused clocks + RWPMIO(SB_PMIO_REGCA, AccWidthUint8, 0xFF, 0x7E); + } + } + writeAlink(0x30, SB_AB_REG40); + writeAlink(0x34, ((readAlink(0x34)) & 0xFFFF0000) | 0x008A); + + } + else{ + //Don't shutoff RTC clock + RWPMIO(SB_PMIO_REG68, AccWidthUint8, ~(UINT32)BIT4, 0); + //Dont disable second PLL + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)BIT0, 0); + //Enable the 25Mhz oscillator + RWPMIO(SB_PMIO_REGD4, AccWidthUint8, ~(UINT32)BIT7, 0); + RWPMIO(SB_PMIO_REGCA, AccWidthUint8, 0xFF, 0x00); + } +} + + +void +hpetInit (AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions) +{ + DESCRIPTION_HEADER* pHpetTable; + + if (pConfig->HpetTimer == 1) { + UINT8 dbTemp; + + RWPMIO(SB_PMIO_REG9A, AccWidthUint8, 0xFF, BIT7); + // Program the HPET BAR address + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGB4, AccWidthUint32 | S3_SAVE, 0, pStaticOptions->HpetBase); + + // Enable HPET MMIO decoding: SMBUS:0x43[4] = 1 + // Enable HPET MSI support only when HpetMsiDis == 0 + dbTemp = (pConfig->HpetMsiDis)? BIT4 : BIT7 + BIT6 + BIT5 + BIT4; + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, dbTemp); + // Program HPET default clock period + if (getRevisionID() >= SB700_A13) { + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG34, AccWidthUint32 | S3_SAVE, 0x00, 0x429B17E); + } + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + // Enable High Precision Event Timer (also called Multimedia Timer) interrupt + RWPCI((SMBUS_BUS_DEV_FUN << 16) + (SB_SMBUS_REG64+1), AccWidthUint8 | S3_SAVE, ~(UINT32)BIT2, BIT2); + } + else { + if (!(pConfig->S3Resume)) { +// pHpetTable = (DESCRIPTION_HEADER*)ACPI_LocateTable('TEPH'); + pHpetTable = (DESCRIPTION_HEADER*)ACPI_LocateTable(Int32FromChar ('T', 'E', 'P', 'H')); + if (pHpetTable != NULL) { +// pHpetTable->Signature = 'HPET'; + pHpetTable->Signature = Int32FromChar ('T', 'E', 'P', 'H'); + } + } + } +} + + +void c3PopupSetting(AMDSBCFG* pConfig){ + UINT8 dbTemp; + CPUID_DATA CpuId; + + CpuidRead (0x01, &CpuId); + //RPR 2.3 C-State and VID/FID Change + dbTemp = GetNumberOfCpuCores(); + if (dbTemp > 1){ + //PM_IO 0x9A[5]=1, For system with dual core CPU, set this bit to 1 to automatically clear BM_STS when the C3 state is being initiated. + //PM_IO 0x9A[4]=1, For system with dual core CPU, set this bit to 1 and BM_STS will cause C3 to wakeup regardless of BM_RLD + //PM_IO 0x9A[2]=1, Enable pop-up for C3. For internal bus mastering or BmReq# from the NB, the SB will de-assert + //LDTSTP# (pop-up) to allow DMA traffic, then assert LDTSTP# again after some idle time. + RWPMIO(SB_PMIO_REG9A, AccWidthUint8, 0xFF, BIT5+BIT4+BIT2); + } + + //SB700 needs to changed for RD790 support + //PM_IO 0x8F [4] = 0 for system with RS690 + //Note: RS690 north bridge has AllowLdtStop built for both display and PCIE traffic to wake up the HT link. + //BmReq# needs to be ignored otherwise may cause LDTSTP# not to toggle. + //PM_IO 0x8F[5]=1, Ignore BM_STS_SET message from NB + RWPMIO(SB_PMIO_REG8F, AccWidthUint8, ~(UINT32)(BIT5+BIT4), BIT5); + + //LdtStartTime = 10h for minimum LDTSTP# de-assertion duration of 16us in StutterMode. This is to guarantee that + //the HT link has been safely reconnected before it can be disconnected again. If C3 pop-up is enabled, the 16us also + //serves as the minimum idle time before LDTSTP# can be asserted again. This allows DMA to finish before the HT + //link is disconnected. + //Increase LDTSTOP Deassertion time for SP5100 to 20us, SB700 remains the same + dbTemp = (IsServer())? 0x14 : 0x10; + RWPMIO(SB_PMIO_REG88, AccWidthUint8, 0x00, dbTemp); + + //This setting provides 16us delay before the assertion of LDTSTOP# when C3 is entered. The + //delay will allow USB DMA to go on in a continous manner + RWPMIO(SB_PMIO_REG89, AccWidthUint8, 0x00, 0x10); + + //Set this bit to allow pop-up request being latched during the minimum LDTSTP# assertion time + RWPMIO(SB_PMIO_REG52, AccWidthUint8, 0xFF, BIT7); + +} + diff --git a/src/vendorcode/amd/cimx/sb700/SBCMNLIB.c b/src/vendorcode/amd/cimx/sb700/SBCMNLIB.c new file mode 100644 index 0000000000..130dbc4235 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SBCMNLIB.c @@ -0,0 +1,108 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +UINT8 isEcPresent(){ + UINT8 dbFlag; + UINT16 dwVar0; + + //Read the EC configuration register base address from LPCCfg_A4[15:1] + //Write 0x5A to the EC config index register to unlock the access + //Write 0x20 to the EC config index register to select the device ID register + //Read the value of device ID register from the EC config data register + //If the value read is 0xB7, then EC is enabled. + //Write 0xA5 to re-lock the EC config index register if EC is enabled. + + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwVar0); + dwVar0 &= 0xFFFE; + RWIO(dwVar0, AccWidthUint8, 0, 0x5A); + RWIO(dwVar0, AccWidthUint8, 0, 0x20); + ReadIO(dwVar0+1, AccWidthUint8, &dbFlag); + RWIO(dwVar0, AccWidthUint8, 0, 0xA5); + + return ( dbFlag == 0xB7); +} + +void +getSbInformation ( +SB_INFORMATION *sbInfo){ + UINT16 dwDevId; + UINT8 dbRev; + + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG02, AccWidthUint16 | S3_SAVE, &dwDevId); + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08, AccWidthUint8 | S3_SAVE, &dbRev); + sbInfo->sbModelMask = SB_MODEL_UNKNOWN; + if ( (dwDevId == SB7XX_DEVICE_ID) && (dbRev <= SB_Rev_Sb7xx_A14) ){ + sbInfo->sbModelMask |= SB_MODEL_SB700; + sbInfo->sbModelMask |= SB_MODEL_SR5690; + sbInfo->sbRev = dbRev; + ReadPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint8 | S3_SAVE, &dbRev); + if (dbRev & 01) + sbInfo->sbModelMask |= SB_MODEL_SB750; + if (isEcPresent()) + sbInfo->sbModelMask |= SB_MODEL_SB710; + return; + } +} + + +SB_CAPABILITY_SETTING +getSbCapability ( +SB_CAPABILITY_ITEM sbCapabilityItem +) +{ + SB_CAPABILITY_SETTING sbCapSetting=SB_UNKNOWN; + UINT32 ddTemp0; + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 00); + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); + + if (sbCapabilityItem < Sb_Unknown_Capability) + sbCapSetting = ((ddTemp0 >> (sbCapabilityItem << 1) ) & 0x03); + + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + return sbCapSetting; +} + + +void +setSbCapability ( +SB_CAPABILITY_ITEM sbCapabilityItem, SB_CAPABILITY_SETTING sbCapSetting +) +{ + UINT32 ddTemp0; + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT3, 00); + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); + if ( (sbCapabilityItem < Sb_Unknown_Capability) & (sbCapSetting < Sb_Cap_Setting_Unknown) ) + ddTemp0 = (ddTemp0 & ~(0x03 << (sbCapabilityItem << 1))) | ( (sbCapSetting & 0x03) << (sbCapabilityItem << 1)); + WritePCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG10, AccWidthUint32, &ddTemp0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); +} diff --git a/src/vendorcode/amd/cimx/sb700/SBCMNLIB.h b/src/vendorcode/amd/cimx/sb700/SBCMNLIB.h new file mode 100644 index 0000000000..e737bc971e --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SBCMNLIB.h @@ -0,0 +1,89 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_SBLIB_H_ +#define _AMD_SBLIB_H_ + +//SB7xx Family +#define SB7xx_DEVICE_ID 0x4385 +#define SB700 0x00 +#define SB750 0x01 +#define SB710 0x02 + +//SB800 Family +#define SB800 0x10 + +#define SB_UNKNOWN 0xFF + +//SB700 Revision IDs +#define SB700_A11 0x39 +#define SB700_A12 0x3A +#define SB700_A13 0x3B +#define SB700_A14 0x3C + +#define SB_Rev_Sb7xx_A11 0x39 +#define SB_Rev_Sb7xx_A12 0x3A +#define SB_Rev_Sb7xx_A13 0x3B +#define SB_Rev_Sb7xx_A14 0x3C + + +typedef enum { + Sb_Raid0_1_Capability, /// + Sb_Raid5_Capability, /// + Sb_Ahci_Capability, /// + Sb_Unknown_Capability +} SB_CAPABILITY_ITEM; + + +typedef enum { + Sb_Cap_Setting_Auto, + Sb_Cap_Setting_Enabled, + Sb_Cap_Setting_Disabled, + Sb_Cap_Setting_Unknown +} SB_CAPABILITY_SETTING; + + +#define SB_MODEL_SB700 BIT0 +#define SB_MODEL_SB750 BIT1 +#define SB_MODEL_SB710 BIT2 +#define SB_MODEL_SR5690 BIT3 +#define SB_MODEL_UNKNOWN BIT31 + +typedef struct +{ + UINT32 sbModelMask; + UINT8 sbRev; +}SB_INFORMATION; + + +void getSbInformation (SB_INFORMATION *sbInfo); +SB_CAPABILITY_SETTING getSbCapability (SB_CAPABILITY_ITEM sbCapabilityItem); +void setSbCapability (SB_CAPABILITY_ITEM sbCapabilityItem, SB_CAPABILITY_SETTING sbCapSetting); + +#endif //#ifndef _AMD_SBLIB_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SBDEF.h b/src/vendorcode/amd/cimx/sb700/SBDEF.h new file mode 100644 index 0000000000..01fc1b5daa --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SBDEF.h @@ -0,0 +1,166 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_SBDEF_H_ +#define _AMD_SBDEF_H_ + +//AMD Library Routines + +UINT64 +MsrRead ( + IN UINT32 MsrAddress + ); + +VOID +MsrWrite ( + IN UINT32 MsrAddress, + IN UINT64 Value + ); + +void ReadIO(UINT16 Address, UINT8 OpFlag, void *Value); +void WriteIO(UINT16 Address, UINT8 OpFlag, void *Value); +void ReadPCI(UINT32 Address, UINT8 OpFlag, void *Value); +void WritePCI(UINT32 Address,UINT8 OpFlag, void *Value); +void RWPCI(UINT32 Address,UINT8 OpFlag,UINT32 Mask,UINT32 Data); +void ReadIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,void* Value); +void WriteIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,UINT8 OpFlag,void* Value); +void RWIndexPCI32(UINT32 PciAddress,UINT32 IndexAddress,UINT8 OpFlag,UINT32 Mask,UINT32 Data); +void RWIO (UINT16 Address, UINT8 OpFlag, UINT32 Mask, UINT32 Data); +void ReadMEM(UINT32 Address,UINT8 OpFlag, void* Value); +void WriteMEM(UINT32 Address,UINT8 OpFlag, void* Value); +void RWMEM(UINT32 Address,UINT8 OpFlag,UINT32 Mask,UINT32 Data); +UINT32 IsFamily10(void); +UINT64 ReadMSR(UINT32 Address); +void WriteMSR(UINT32 Address,UINT64 Value); +void RWMSR(UINT32 Address, UINT64 Mask, UINT64 Value); +void* LocateImage(UINT32 Signature); +void* CheckImage( UINT32 Signature, void* ImagePtr); +void Stall(UINT32 uSec); +void Reset(void); +CIM_STATUS RWSMBUSBlock(UINT8 Controller, UINT8 Address, UINT8 Offset, UINT8 BufferSize, UINT8* BufferPrt); +void InitSerialOut(void); +void ReadPMIO(UINT8 Address, UINT8 OpFlag, void* Value); +void WritePMIO(UINT8 Address, UINT8 OpFlag, void* Value); +void RWPMIO(UINT8 Address, UINT8 OpFlag, UINT32 AndMask, UINT32 OrMask); +void ReadPMIO2(UINT8 Address, UINT8 OpFlag, void* Value); +void WritePMIO2(UINT8 Address, UINT8 OpFlag, void* Value); +void RWPMIO2(UINT8 Address, UINT8 OpFlag, UINT32 AndMask, UINT32 OrMask); +void outPort80(UINT32 pcode); +UINT8 GetNumberOfCpuCores(void); +UINT8 ReadNumberOfCpuCores(void); +UINT8 GetByteSum(void* pData, UINT32 Length); +UINT32 readAlink(UINT32 Index); +void writeAlink(UINT32 Index,UINT32 Data); + +//---------------------------------------------------------------------------------------------- +//---------------------------------------------------------------------------------------------- +void azaliaInitAfterPciEnum (AMDSBCFG* pConfig); + +void SendBytePort(UINT8 Data); +void SendStringPort(char* pstr); +void ItoA(UINT32 Value,int Radix,char* pstr); +AMDSBCFG* getConfigPointer(void); +void saveConfigPointer(AMDSBCFG* pConfig); + + +UINT32 GetFixUp(void); + +void sataInitAfterPciEnum(AMDSBCFG* pConfig); +void sataInitBeforePciEnum(AMDSBCFG* pConfig); +void sataInitLatePost(AMDSBCFG* pConfig); +void sataDriveDetection(AMDSBCFG* pConfig, UINT32 ddBar5); +void sataPhyWorkaround(AMDSBCFG* pConfig, UINT32 ddBar5); +void forceOOB(UINT32 ddBar5); +void shutdownUnconnectedSataPortClock(AMDSBCFG* pConfig, UINT32 ddBar5); +void restrictSataCapabilities(AMDSBCFG* pConfig); + + +void commonInitEarlyBoot(AMDSBCFG* pConfig); +void commonInitEarlyPost(AMDSBCFG* pConfig); +void setRevisionID(void); +UINT8 getRevisionID(void); +UINT8 IsServer (void); +UINT8 IsLs2Mode (void); +void abLinkInitBeforePciEnum(AMDSBCFG* pConfig); +void abcfgTbl(ABTBLENTRY* pABTbl); +void programSubSystemIDs(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions); +void commonInitLateBoot(AMDSBCFG* pConfig); +void hpetInit(AMDSBCFG* pConfig, BUILDPARAM *pStaticOptions); +void c3PopupSetting(AMDSBCFG* pConfig); + +void sbBeforePciInit (AMDSBCFG* pConfig); +void sbAfterPciInit(AMDSBCFG* pConfig); +void sbLatePost(AMDSBCFG* pConfig); +void sbBeforePciRestoreInit(AMDSBCFG* pConfig); +void sbAfterPciRestoreInit(AMDSBCFG* pConfig); +void sbSmmAcpiOn(AMDSBCFG* pConfig); +UINT32 GetPciebase(void); +UINT32 CallBackToOEM(UINT32 Func, UINTN Data,AMDSBCFG* pConfig); +void sbSmmService(AMDSBCFG* pConfig); +void softwareSMIservice(void); + +void sbPowerOnInit (AMDSBCFG *pConfig); +void programPciByteTable(REG8MASK* pPciByteTable, UINT16 dwTableSize); +void programPmioByteTable(REG8MASK* pPmioByteTable, UINT16 dwTableSize); +UINT8 getClockMode(void); +UINT16 readStrapStatus (void); + +void usbInitBeforePciEnum(AMDSBCFG* pConfig); +void usbInitAfterPciInit(AMDSBCFG* pConfig); +void usbInitMidPost(AMDSBCFG* pConfig); +void programOhciMmioForEmulation(void); + +void fcInitBeforePciEnum(AMDSBCFG* pConfig); + +unsigned char ReadIo8 (IN unsigned short Address); +unsigned short ReadIo16 (IN unsigned short Address); +unsigned int ReadIo32 (IN unsigned short Address); +void WriteIo8 (IN unsigned short Address, IN unsigned char Data); +void WriteIo16 (IN unsigned short Address, IN unsigned short Data); +void WriteIo32 (IN unsigned short Address, IN unsigned int Data); +unsigned long long ReadTSC (void); +void CpuidRead (IN unsigned int Func, IN OUT CPUID_DATA* Data); + +#ifndef NO_EC_SUPPORT +void EnterEcConfig(void); +void ExitEcConfig(void); +void ReadEC8(UINT8 Address, UINT8* Value); +void WriteEC8(UINT8 Address, UINT8* Value); +void RWEC8(UINT8 Address, UINT8 AndMask, UINT8 OrMask); +void ecPowerOnInit(BUILDPARAM *pBuildOptPtr, AMDSBCFG *pConfig); +void ecInitBeforePciEnum(AMDSBCFG* pConfig); +void ecInitLatePost(AMDSBCFG* pConfig); +#endif +UINT8 isEcPresent(void); + +void DispatcherEntry(void *pConfig); +AGESA_STATUS AmdSbDispatcher(void *pConfig); +void AMDFamily15CpuLdtStopReq(void); + +#endif //#ifndef _AMD_SBDEF_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SBMAIN.c b/src/vendorcode/amd/cimx/sb700/SBMAIN.c new file mode 100644 index 0000000000..7468eb2d4c --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SBMAIN.c @@ -0,0 +1,289 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +#ifndef B1_IMAGE + +BUILDPARAM DfltStaticOptions={ + BIOS_SIZE, // BIOS Size + LEGACY_FREE, // Legacy Free Option + 0x00, // Dummy space holder + + 0x00, // ECKbd disable/enable + 0x00, // EcChannel0 disable/enable + 0x00, // Dummy space holder1 + + SMBUS0_BASE_ADDRESS, // Smbus Base Address; + SMBUS1_BASE_ADDRESS, // Smbus Base Address; + SIO_PME_BASE_ADDRESS, // SIO PME Base Address + WATCHDOG_TIMER_BASE_ADDRESS, // Watchdog Timer Base Address + SPI_BASE_ADDRESS, + + PM1_EVT_BLK_ADDRESS, // AcpiPm1EvtBlkAddr; + PM1_CNT_BLK_ADDRESS, // AcpiPm1CntBlkAddr; + PM1_TMR_BLK_ADDRESS, // AcpiPmTmrBlkAddr; + CPU_CNT_BLK_ADDRESS, // CpuControlBlkAddr; + GPE0_BLK_ADDRESS, // AcpiGpe0BlkAddr; + SMI_CMD_PORT, // SmiCmdPortAddr; + ACPI_PMA_CNT_BLK_ADDRESS, // AcpiPmaCntBlkAddr; + + EC_LDN5_MAILBOX_ADDRESS, + EC_LDN5_IRQ, + EC_LDN9_MAILBOX_ADDRESS, // EC LDN9 Mailbox address + RESERVED_VALUE, + RESERVED_VALUE, + RESERVED_VALUE, + RESERVED_VALUE, + + HPET_BASE_ADDRESS, // HPET Base address + + SATA_IDE_MODE_SSID, + SATA_RAID_MODE_SSID, + SATA_RAID5_MODE_SSID, + SATA_AHCI_SSID, + + OHCI0_SSID, + OHCI1_SSID, + EHCI0_SSID, + OHCI2_SSID, + OHCI3_SSID, + EHCI1_SSID, + OHCI4_SSID, + SMBUS_SSID, + IDE_SSID, + AZALIA_SSID, + LPC_SSID, + P2P_SSID, +}; + + +/********************************************************************************* +* +* Routine Description: Config SB Before PCI INIT +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: +* +* void +* +**********************************************************************************/ +void sbBeforePciInit (AMDSBCFG* pConfig){ + BUILDPARAM *pStaticOptions; + + pStaticOptions = &pConfig->BuildParameters; + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbBeforePciInit \n")); + commonInitEarlyBoot(pConfig); + commonInitEarlyPost(pConfig); +#ifndef NO_EC_SUPPORT + ecInitBeforePciEnum(pConfig); +#endif + usbInitBeforePciEnum(pConfig); // USB POST TIME Only + fcInitBeforePciEnum(pConfig); // Preinit flash controller + sataInitBeforePciEnum(pConfig); // Init SATA class code and PHY + programSubSystemIDs(pConfig, pStaticOptions); // Set subsystem/vendor ID + + TRACE((DMSG_SB_TRACE, "CIMx - Exiting sbBeforePciInit \n")); +} + + +/********************************************************************************* +* +* Routine Description: Config SB After PCI INIT +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: void +* +* Reference: atiSbAfterPciInit +* +**********************************************************************************/ +void sbAfterPciInit(AMDSBCFG* pConfig){ + BUILDPARAM *pStaticOptions; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbAfterPciInit \n")); + + pStaticOptions = &pConfig->BuildParameters; + usbInitMidPost(pConfig); //usb initialization which is required only during post + usbInitAfterPciInit(pConfig); // Init USB MMIO + sataInitAfterPciEnum(pConfig); // SATA port enumeration + azaliaInitAfterPciEnum(pConfig); // Detect and configure High Definition Audio + + TRACE((DMSG_SB_TRACE, "CIMx - Exiting sbAfterPciInit \n")); +} + + +/********************************************************************************* +* +* Routine Description: Config SB during late POST +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: void +* +* Reference: atiSbLatePost +* +**********************************************************************************/ +void sbLatePost(AMDSBCFG* pConfig){ + UINT16 dwVar; + BUILDPARAM *pStaticOptions; + pStaticOptions = &pConfig->BuildParameters; + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbLatePost \n")); + ReadPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG02, AccWidthUint16, &dwVar); + if (dwVar != SB7XX_DEVICE_ID){ + // Display message that the SB is wrong and stop the system + TRACE((DMSG_SB_TRACE, "Current system does not have SB700 chipset. Stopping\n")); + for(;;); + } + commonInitLateBoot(pConfig); + sataInitLatePost(pConfig); + hpetInit(pConfig, pStaticOptions); // SB Configure HPET base and enable bit +#ifndef NO_EC_SUPPORT + ecInitLatePost(pConfig); +#endif +} + +/********************************************************************************* +* +* Routine Description: Config SB before ACPI S3 resume PCI config device restore +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: void +* +* Reference: AtiSbBfPciRestore +* +**********************************************************************************/ +void sbBeforePciRestoreInit(AMDSBCFG* pConfig){ + BUILDPARAM *pStaticOptions; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbBeforePciRestoreInit \n")); + + pConfig->S3Resume = 1; + + pStaticOptions = &pConfig->BuildParameters; + commonInitEarlyBoot(pConfig); // set /SMBUS/ACPI/IDE/LPC/PCIB + abLinkInitBeforePciEnum(pConfig); // Set ABCFG registers + usbInitBeforePciEnum(pConfig); // USB POST TIME Only + fcInitBeforePciEnum(pConfig); // Preinit flash controller + sataInitBeforePciEnum(pConfig); + programSubSystemIDs(pConfig, pStaticOptions); // Set subsystem/vendor ID +} + + +/********************************************************************************* +* +* Routine Description: Config SB after ACPI S3 resume PCI config device restore +* +* Arguments: +* +* pConfig - SBconfiguration +* +* Returns: void +* +* Reference: AtiSbAfPciRestore +* +**********************************************************************************/ +void sbAfterPciRestoreInit(AMDSBCFG* pConfig){ + BUILDPARAM *pStaticOptions; + + pConfig->S3Resume = 1; + + pStaticOptions = &pConfig->BuildParameters; + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbAfterPciRestoreInit \n")); + + commonInitLateBoot(pConfig); + sataInitAfterPciEnum(pConfig); + azaliaInitAfterPciEnum(pConfig); // Detect and configure High Definition Audio + hpetInit(pConfig, pStaticOptions); // SB Configure HPET base and enable bit + sataInitLatePost(pConfig); + sbSmmAcpiOn(pConfig); +} + + +/*++ + +Routine Description: + + SB config hook during ACPI_ON + +Arguments: + + pConfig - SBconfiguration + +Returns: + + void + +--*/ + +void sbSmmAcpiOn(AMDSBCFG* pConfig){ + UINT32 ddBar5; + UINT8 dbPort; + + //RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), 0); + if (getRevisionID() >= SB700_A13) + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG43, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); //Enable Legacy DMA prefetch enhancement + + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT1+BIT0), 0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64+3, AccWidthUint8| S3_SAVE, ~(UINT32)BIT7, 0); + programOhciMmioForEmulation(); + + // For IDE_TO_AHCI_MODE and IDE_TO_AMD_AHCI_MODE, clear Interrupt Status register for all ports + ReadPCI( ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, &ddBar5); + if ((pConfig->SataClass == IDE_TO_AHCI_MODE) || (pConfig->SataClass == IDE_TO_AMD_AHCI_MODE)){ + for (dbPort = 0; dbPort <= 5; dbPort++) { + RWMEM(ddBar5 + SB_SATA_BAR5_REG110 + dbPort * 0x80, AccWidthUint32, 0x00, 0xFFFFFFFF); + } + } +} + + +UINT32 CallBackToOEM(UINT32 Func, UINTN Data,AMDSBCFG* pConfig){ + UINT32 Result=0; + TRACE((DMSG_SB_TRACE,"OEM Call Back Func [%x] Data [%x]\n",Func,Data)); + if (pConfig->StdHeader.pCallBack==NULL) + return Result; + Result = (*(pConfig->StdHeader.pCallBack))(Func,Data,pConfig); + TRACE((DMSG_SB_TRACE,"SB Hook Status [%x]\n",Result)); + return Result; +} + +#endif diff --git a/src/vendorcode/amd/cimx/sb700/SBPOR.c b/src/vendorcode/amd/cimx/sb700/SBPOR.c new file mode 100644 index 0000000000..6c5740bf37 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SBPOR.c @@ -0,0 +1,441 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +REG8MASK sbPorInitPciTable[] = { + // SMBUS Device(Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_SMBUS_REGD0+2, 0x00, 0x01}, + {SB_SMBUS_REG40, 0x00, 0x44}, + {SB_SMBUS_REG40+1, 0xFF, 0xE9}, //Set smbus pci config 0x40[14]=1, This bit is used for internal bus flow control. + {SB_SMBUS_REG64, 0x00, 0xBF}, //SB_SMBUS_REG64[13]=1, delays back to back interrupts to the CPU + {SB_SMBUS_REG64+1, 0x00, 0x78}, + {SB_SMBUS_REG64+2, ~(UINT8)BIT6, 0x9E}, + {SB_SMBUS_REG64+3, 0x0F, 0x02}, + {SB_SMBUS_REG68+1, 0x00, 0x90}, + {SB_SMBUS_REG6C, 0x00, 0x20}, + {SB_SMBUS_REG78, 0x00, 0xFF}, + {SB_SMBUS_REG04, 0x00, 0x07}, + {SB_SMBUS_REG04+1, 0x00, 0x04}, + {SB_SMBUS_REGE1, 0x00, 0x99}, //RPR recommended setting, Sections "SMBUS Pci Config" & "IMC Access Control" + {SB_SMBUS_REGAC, ~(UINT8)BIT4, BIT1}, + {SB_SMBUS_REG60+2, ~(UINT8)(BIT1+BIT0) , 0x24}, // Disabling Legacy USB Fast SMI# Smbus_PCI_config 0x62 [5] = 1. Legacy USB + // can request SMI# to be sent out early before IO completion. + // Some applications may have problems with this feature. The BIOS should set this bit + // to 1 to disable the feature. Enabling Legacy Interrupt Smbus_PCI_Config 0x62[2]=1. + {0xFF, 0xFF, 0xFF}, + + // LPC Device(Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REG40, 0x00, 0x04}, + {SB_LPC_REG48, 0x00, 0x07}, + {SB_LPC_REG4A, 0x00, 0x20}, // Port Enable for IO Port 80h. + {SB_LPC_REG78, ~(UINT8)BIT0, 0x00}, + {SB_LPC_REG7C, 0x00, 0x05}, + {SB_LPC_REGB8+3, ~(UINT8)BIT0, BIT7+BIT6+BIT5+BIT3+BIT0}, //RPR recommended setting,Section "IO / Mem Decoding" & "SPI bus" + {0xFF, 0xFF, 0xFF}, + + // P2P Bridge(Bus 0, Dev 20, Func 4) + {0x00, SBP2P_BUS_DEV_FUN, 0}, + {SB_P2P_REG40, 0x00, 0x26}, // Enabling PCI-bridge subtractive decoding & PCI Bus 64-byte DMA Read Access + {SB_P2P_REG4B, 0xFF, BIT6+BIT7+BIT4}, + {SB_P2P_REG1C, 0x00, 0x11}, + {SB_P2P_REG1D, 0x00, 0x11}, + {SB_P2P_REG04, 0x00, 0x21}, + {SB_P2P_REG50, 0x02, 0x01}, // PCI Bridge upstream dual address window + {0xFF, 0xFF, 0xFF}, +}; + + +REG8MASK sbA13PorInitPciTable[] = { + // SMBUS Device(Bus 0, Dev 20, Func 0) + {0x00, SMBUS_BUS_DEV_FUN, 0}, + {SB_SMBUS_REG43, ~(UINT8)BIT3, 0x00}, //Make some hidden registers of smbus visible. + {SB_SMBUS_REG38, (UINT8)~BIT7, 00}, + {SB_SMBUS_REGAC+1, ~(UINT8)BIT5, 0}, //Enable SATA test/enhancement mode + {SB_SMBUS_REG43, 0xFF, BIT3}, //Make some hidden registers of smbus invisible. + {0xFF, 0xFF, 0xFF}, +}; + + +REG8MASK sbA14PorInitPciTable[] = { + // LPC Device(Bus 0, Dev 20, Func 3) + {0x00, LPC_BUS_DEV_FUN, 0}, + {SB_LPC_REG8C+2, ~(UINT8)BIT1, 00}, + {0xFF, 0xFF, 0xFF}, +}; + +REG8MASK sbPorPmioInitTbl[] = { + // index andmask ormask + {SB_PMIO_REG67, 0xFF, 0x02}, + {SB_PMIO_REG37, 0xFF, 0x04}, // Configure pciepme as rising edge + {SB_PMIO_REG50, 0x00, 0xE0}, // Enable CPU_STP (except S5) & PCI_STP + {SB_PMIO_REG60, 0xFF, 0x20}, // Enable Speaker + {SB_PMIO_REG65, (UINT8)~(BIT4+BIT7), 0x00},// Clear PM_IO 0x65[4] UsbResetByPciRstEnable to avoid S3 reset to reset USB + {SB_PMIO_REG55, ~(UINT8)BIT6, 0x07}, // Select CIR wake event to ACPI.GEVENT[23] & Clear BIT6 SoftPciRst for safety + {SB_PMIO_REG66, 0xFF, BIT5}, // Configure keyboard reset to generate pci reset + {SB_PMIO_REGB2, 0xFF, BIT7}, + {SB_PMIO_REG0E, 0xFF, BIT3}, // Enable ACPI IO decoding + {SB_PMIO_REGD7, 0xF6, 0x80}, + {SB_PMIO_REG7C, 0xFF, BIT4}, // enable RTC AltCentury register + + {SB_PMIO_REG75, 0xC0, 0x05}, // PME_TURN_OFF_MSG during ASF shutdown + {SB_PMIO_REG52, 0xC0, 0x08}, + + {SB_PMIO_REG8B, 0x00, 0x10}, + {SB_PMIO_REG69, 0xF9, 0x01 << 1}, // [Updated RPR] Set default WDT resolution to 10ms +}; + +REG8MASK sbA13PorPmioInitTbl[]={ + // index andmask ormask + {SB_PMIO_REGD7, 0xFF, BIT5+BIT0}, //Fixes for TT SB00068 & SB01054 (BIT5 & BIT0 correspondingly) + {SB_PMIO_REGBB, (UINT8)~BIT7, BIT6+BIT5}, //Fixes for TT SB00866 & SB00696 (BIT6 & BIT5 correspondingly) + // Always clear [7] to begin with SP5100 C1e disabled + +// {SB_PMIO_REG65, 0xFF, BIT7}, +// {SB_PMIO_REG75, 0xC0, 0x01}, // PME_TURN_OFF_MSG during ASF shutdown +// {SB_PMIO_REG52, 0xC0, 0x02}, + +}; + + +void sbPowerOnInit (AMDSBCFG *pConfig){ + UINT8 dbVar0, dbVar1, dbValue; + UINT16 dwTempVar; + BUILDPARAM *pBuildOptPtr; + + TRACE((DMSG_SB_TRACE, "CIMx - Entering sbPowerOnInit \n")); + + setRevisionID(); + ReadPCI(((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, &dwTempVar); + if (dwTempVar == SB750_SATA_DEFAULT_DEVICE_ID) + RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint8 | S3_SAVE, 0xFF, 0x01); + + // Set A-Link bridge access address. This address is set at device 14h, function 0, + // register 0f0h. This is an I/O address. The I/O address must be on 16-byte boundry. + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGF0, AccWidthUint32, 00, ALINK_ACCESS_INDEX); + + writeAlink(0x80000004, 0x04); // RPR 3.3 Enabling upstream DMA Access + writeAlink(0x30, 0x10); //AXINDC 0x10[9]=1, Enabling Non-Posted memory write for K8 platform. + writeAlink(0x34, readAlink(0x34) | BIT9); + + if (!(pConfig->ResetCpuOnSyncFlood)){ + //Enable reset on sync flood + writeAlink( (UINT32)( ((UINT32)SB_AB_REG10050) | ((UINT32)ABCFG << 30)), + (UINT32)( readAlink((((UINT32)SB_AB_REG10050) | ((UINT32)ABCFG << 30))) | ((UINT32)BIT2) )); + } + + pBuildOptPtr = &(pConfig->BuildParameters); + + WritePCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG90, AccWidthUint32 | S3_SAVE, &(pBuildOptPtr->Smbus0BaseAddress) ); + + dwTempVar = pBuildOptPtr->Smbus1BaseAddress & (UINT16)~BIT0; + if( dwTempVar != 0 ){ + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG58, AccWidthUint16 | S3_SAVE, 00, (dwTempVar|BIT0)); + // Disable ASF Slave controller on SB700 rev A15. + if (getRevisionID() == SB700_A15) { + RWIO((dwTempVar+0x0D), AccWidthUint8, (UINT8)~BIT6, BIT6); + } + } + + WritePCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG64, AccWidthUint16 | S3_SAVE, &(pBuildOptPtr->SioPmeBaseAddress)); + RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA0, AccWidthUint32 | S3_SAVE, 0x001F,(pBuildOptPtr->SpiRomBaseAddress)); + + WritePMIO(SB_PMIO_REG20, AccWidthUint16, &(pBuildOptPtr->AcpiPm1EvtBlkAddr)); + WritePMIO(SB_PMIO_REG22, AccWidthUint16, &(pBuildOptPtr->AcpiPm1CntBlkAddr)); + WritePMIO(SB_PMIO_REG24, AccWidthUint16, &(pBuildOptPtr->AcpiPmTmrBlkAddr)); + WritePMIO(SB_PMIO_REG26, AccWidthUint16, &(pBuildOptPtr->CpuControlBlkAddr)); + WritePMIO(SB_PMIO_REG28, AccWidthUint16, &(pBuildOptPtr->AcpiGpe0BlkAddr)); + WritePMIO(SB_PMIO_REG2A, AccWidthUint16, &(pBuildOptPtr->SmiCmdPortAddr)); + WritePMIO(SB_PMIO_REG2C, AccWidthUint16, &(pBuildOptPtr->AcpiPmaCntBlkAddr)); + RWPMIO(SB_PMIO_REG2E, AccWidthUint16, 0x00,(pBuildOptPtr->SmiCmdPortAddr)+8); + WritePMIO(SB_PMIO_REG6C, AccWidthUint32, &(pBuildOptPtr->WatchDogTimerBase)); + + //Program power on pci init table + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbPorInitPciTable[0]), sizeof(sbPorInitPciTable)/sizeof(REG8MASK) ); + //Program power on pmio init table + programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbPorPmioInitTbl[0]), (sizeof(sbPorPmioInitTbl)/sizeof(REG8MASK)) ); + + dbValue = 0x00; + ReadIO (SB_IOMAP_REGC14, AccWidthUint8, &dbValue); + dbValue &= 0xF3; + WriteIO (SB_IOMAP_REGC14, AccWidthUint8, &dbValue); + + dbValue = 0x0A; + WriteIO (SB_IOMAP_REG70, AccWidthUint8, &dbValue); + ReadIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); + dbValue &= 0xEF; + WriteIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue); + + + if (getRevisionID() >= SB700_A13){ + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbA13PorInitPciTable[0]), sizeof(sbA13PorInitPciTable)/sizeof(REG8MASK) ); + programPmioByteTable( (REG8MASK *)FIXUP_PTR(&sbA13PorPmioInitTbl[0]), (sizeof(sbA13PorPmioInitTbl)/sizeof(REG8MASK)) ); + } + + if ((getRevisionID() >= SB700_A14) ) + programPciByteTable( (REG8MASK*)FIXUP_PTR(&sbA14PorInitPciTable[0]), sizeof(sbA14PorInitPciTable)/sizeof(REG8MASK) ); + + if ( (getRevisionID() >= SB700_A14) && ( (pConfig->TimerClockSource == 1) || (pConfig->TimerClockSource == 2) )){ + ReadPMIO(SB_PMIO_REGD4, AccWidthUint8, &dbVar1); + if (!(dbVar1 & BIT6)){ + RWPMIO(SB_PMIO_REGD4, AccWidthUint8, 0xFF, BIT6); + pConfig->RebootRequired=1; + } + } + + if (getRevisionID() > SB700_A11) { + if (pConfig->PciClk5 == 1) + RWPMIO(SB_PMIO_REG41, AccWidthUint8, ~(UINT32)BIT1, BIT1); // Enabled PCICLK5 for A12 + } + + dbVar0 = (pBuildOptPtr->BiosSize + 1) & 7; + if (dbVar0 > 4) { + dbVar0 = 0; + } + //KZ [061811]-It's used wrong BIOS SIZE for Coreboot. RWPCI((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG6C, AccWidthUint8 | S3_SAVE, 0x00, 0xF8 << dbVar0); + + if (pConfig->Spi33Mhz) + //spi reg0c[13:12] to 01h to run spi 33Mhz in system bios + RWMEM((pBuildOptPtr->SpiRomBaseAddress)+SB_SPI_MMIO_REG0C,AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT13+BIT12), BIT12); + + //SB internal spread spectrum settings. A reboot is required if the spread spectrum settings have to be changed + //from the existing value. + ReadPMIO(SB_PMIO_REG42, AccWidthUint8, &dbVar0); + if (pConfig->SpreadSpectrum != (dbVar0 >> 7) ) + pConfig->RebootRequired = 1; + if (pConfig->SpreadSpectrum) + RWPMIO(SB_PMIO_REG42, AccWidthUint8, ~(UINT32)BIT7, BIT7); + else + RWPMIO(SB_PMIO_REG42, AccWidthUint8, ~(UINT32)BIT7, 0); + + if ( !(pConfig->S3Resume) ){ + //To detect whether internal clock chip is used, do the following procedure + //set PMIO_B2[7]=1, then read PMIO_B0[4]; if it is 1, we are strapped to CLKGEN mode. + //if it is 0, we are using clock chip on board. + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT7); + + //Do the following programming only for SB700-A11. + //1. Set PMIO_B2 [7]=1 and read B0 and B1 and save those values. + //2. Set PMIO_B2 [7]=0 + //3. Write the saved values from step 1, back to B0 and B1. + //4. Set PMIO_B2 [6]=1. + ReadPMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTempVar); + if (getRevisionID() == SB700_A11){ + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, ~(UINT32)BIT7, 00); + WritePMIO(SB_PMIO_REGB0, AccWidthUint16, &dwTempVar); + RWPMIO(SB_PMIO_REGB2, AccWidthUint8, 0xFF, BIT6); + } + + if (!(dwTempVar & BIT4)){ + RWPMIO(SB_PMIO_REGD0, AccWidthUint8, ~(UINT32)BIT0, 0); //Enable PLL2 + + //we are in external clock chip on the board + if (pConfig->UsbIntClock == CIMX_OPTION_ENABLED){ + //Configure usb clock to come from internal PLL + RWPMIO(SB_PMIO_REGD2, AccWidthUint8, 0xFF, BIT3); //Enable 48Mhz clock from PLL2 + RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, BIT4); //Tell USB PHY to use internal 48Mhz clock from PLL2 + } + else{ + //Configure usb clock to come from external clock + RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, 0); //Tell USB PHY to use external 48Mhz clock from PLL2 + RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, 00); //Disable 48Mhz clock from PLL2 + } + } + else{ + //we are using internal clock chip on this board + if (pConfig->UsbIntClock == CIMX_OPTION_ENABLED){ + //Configure usb clock to come from internal PLL + RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, 0); //Enable 48Mhz clock from PLL2 + RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, BIT4); //Tell USB PHY to use internal 48Mhz clock from PLL2 + } + else{ + //Configure usb clock to come from external clock + RWPMIO(SB_PMIO_REGBD, AccWidthUint8, ~(UINT32)BIT4, 0); //Tell USB PHY to use external 48Mhz clock from PLL2 + RWPMIO(SB_PMIO_REGD2, AccWidthUint8, ~(UINT32)BIT3, BIT3); //Disable 48Mhz clock from PLL2 + } + } + + ReadPMIO(SB_PMIO_REG43, AccWidthUint8, &dbVar0); + RWPMIO(SB_PMIO_REG43, AccWidthUint8, ~(UINT32)(BIT6+BIT5+BIT0), (pConfig->UsbIntClock << 5)); + //Check whether our usb clock settings changed compared to previous boot, if yes then we need to reboot. + if ( (dbVar0 & BIT0) || ( (pConfig->UsbIntClock) != ((dbVar0 & (BIT6+BIT5)) >> 5)) ) pConfig->RebootRequired = 1; + } + + if (pBuildOptPtr->LegacyFree) //if LEGACY FREE system + RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0x0003C000); + else + RWPCI(((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0xFF03FFD5); + + if ( (getRevisionID() == SB700_A14) || (getRevisionID() == SB700_A13)){ + RWPMIO(SB_PMIO_REG65, AccWidthUint8, 0xFF, BIT7); + RWPMIO(SB_PMIO_REG75, AccWidthUint8, 0xC0, BIT0); + RWPMIO(SB_PMIO_REG52, AccWidthUint8, 0xC0, BIT1); + } + + if (getRevisionID() >= SB700_A15) { + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40+3, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT3), 0); + //Enable unconditional shutdown fix in A15 + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG38+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT4); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40+3, AccWidthUint8 | S3_SAVE, 0xFF, BIT3); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG06+1, AccWidthUint8 | S3_SAVE, 0xFF, 0xD0); + } + + // [Updated RPR] Set ImcHostSmArbEn(SMBUS:0xE1[5]) only when IMC is enabled + if (isEcPresent()) { + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGE1, AccWidthUint8 | S3_SAVE, 0xFF, BIT5); + } + + //According to AMD Family 15h Models 00h-0fh processor BKDG section 2.12.8 LDTSTOP requirement + // to program VID/FID LDTSTP# duration selection register + AMDFamily15CpuLdtStopReq(); + +#ifndef NO_EC_SUPPORT + ecPowerOnInit(pBuildOptPtr, pConfig); +#endif +} + + +void setRevisionID(void){ + UINT8 dbVar0, dbVar1; + + ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); + ReadPMIO(SB_PMIO_REG53, AccWidthUint8, &dbVar1); + if ( (dbVar0 == 0x39) && (dbVar1 & BIT6) && !(dbVar1 & BIT7)){ + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40), AccWidthUint8, ~(UINT32)BIT0, BIT0); + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, 00, SB700_A12); + RWPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG40), AccWidthUint8, ~(UINT32)BIT0, 00); + } + ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); +} + + +UINT8 getRevisionID(void){ + UINT8 dbVar0; + + ReadPCI(((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG08), AccWidthUint8, &dbVar0); + return dbVar0; +} + + +void AMDFamily15CpuLdtStopReq(void) { + CPUID_DATA CpuId; + CPUID_DATA CpuId_Brand; + UINT8 dbVar0, dbVar1, dbVar2; + + //According to AMD Family 15h Models 00h-0fh processor BKDG section 2.12.8 LDTSTOP requirement + //to program VID/FID LDTSTP# duration selection register + //If any of the following system configuration properties are true LDTSTP# assertion time required by the processor is 10us: + // 1. Any link in the system operating at a Gen 1 Frequency. + // 2. Also for server platform (G34/C32) set PM_REG8A[6:4]=100b (16us) + + CpuidRead (0x01, &CpuId); + CpuidRead (0x80000001, &CpuId_Brand); //BrandID, to read socket type + if ((CpuId.REG_EAX & 0xFFFFFF00) == 0x00600F00) { + + //Program to Gen 3 default value - 001b + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x10); //set [6:4]=001b + + //Any link in the system operating at a Gen 1 Frequency. + //Check Link 0 - Link connected regsister + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG98), AccWidthUint8, &dbVar2); + dbVar2 = dbVar2 & 0x01; + + if(dbVar2 == 0x01) { + //Check Link 0 - Link Frequency Freq[4:0] + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG89), AccWidthUint8, &dbVar0); + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REG9C), AccWidthUint8, &dbVar1); + dbVar0 = dbVar0 & 0x0F; //Freq[3:0] + dbVar1 = dbVar1 & 0x01; //Freq[4] + dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] + //Value 6 or less indicate Gen1 + if(dbVar0 <= 0x6) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + + //Check Link 1 - Link connected regsister + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGB8), AccWidthUint8, &dbVar2); + dbVar2 = dbVar2 & 0x01; + if(dbVar2 == 0x01) { + //Check Link 1 - Link Frequency Freq[4:0] + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGA9), AccWidthUint8, &dbVar0); + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGBC), AccWidthUint8, &dbVar1); + dbVar0 = dbVar0 & 0x0F; //Freq[3:0] + dbVar1 = dbVar1 & 0x01; //Freq[4] + dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] + //Value 6 or less indicate Gen1 + if(dbVar0 <= 0x6) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + + //Check Link 2 - Link connected regsister + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGD8), AccWidthUint8, &dbVar2); + dbVar2 = dbVar2 & 0x01; + if(dbVar2 == 0x01) { + //Check Link 2 - Link Frequency Freq[4:0] + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGC9), AccWidthUint8, &dbVar0); + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGDC), AccWidthUint8, &dbVar1); + dbVar0 = dbVar0 & 0x0F; //Freq[3:0] + dbVar1 = dbVar1 & 0x01; //Freq[4] + dbVar0 = (dbVar1 << 4) | dbVar0; //Freq[4:0] + //Value 6 or less indicate Gen1 + if(dbVar0 <= 0x6) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + + //Check Link 3 - Link connected regsister + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGF8), AccWidthUint8, &dbVar2); + dbVar2 = dbVar2 & 0x01; + if(dbVar2 == 0x01) { + //Check Link 3 - Link Frequency Freq[4:0] + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGE9), AccWidthUint8, &dbVar0); + ReadPCI(((HT_LINK_BUS_DEV_FUN << 16) + HT_LINK_REGFC), AccWidthUint8, &dbVar1); + dbVar0 = dbVar0 & 0x0F; //Freq[3:0] + dbVar1 = dbVar1 & 0x01; //Freq[4] + dbVar0 = ((dbVar1 << 4) | dbVar0); //Freq[4:0] + //Value 6 or less indicate Gen1 + if(dbVar0 <= 0x6) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + + // Server platform (G34/C32) set PM_REG8A[6:4]=100b (16us) + if(((CpuId_Brand.REG_EBX & 0xF0000000) == 0x30000000) || ((CpuId_Brand.REG_EBX & 0xF0000000) == 0x50000000)) { + RWPMIO(SB_PMIO_REG8A, AccWidthUint8, 0x8F, 0x40); //set [6:4]=100b + } + } + +} + diff --git a/src/vendorcode/amd/cimx/sb700/SBTYPE.h b/src/vendorcode/amd/cimx/sb700/SBTYPE.h new file mode 100644 index 0000000000..faeae5d5a8 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SBTYPE.h @@ -0,0 +1,249 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_SBTYPE_H_ +#define _AMD_SBTYPE_H_ + +#pragma pack(push,1) + +typedef UINT32 (*CIM_HOOK_ENTRY)(UINT32 Param1, UINTN Param2, void* pConfig); +typedef void (*SMM_SERVICE_ROUTINE) (void); + +typedef struct _STDCFG{ + UINT32 pImageBase; + UINT32 pPcieBase; + UINT8 Func; + CIM_HOOK_ENTRY pCallBack; + UINT32 pB2ImageBase; +}STDCFG; //Size of stdcfg is 17 bytes + +typedef struct _BUILDPARAM +{ + UINT16 BiosSize:3; //0-1MB, 1-2MB, 2-4MB, 3-8MB, 7-512KB, all other values reserved + UINT16 LegacyFree:1; + UINT16 Dummy0:12; + + UINT16 EcKbd:1; + UINT16 EcChannel0:1; + UINT16 Dummy1:14; + + UINT32 Smbus0BaseAddress; + UINT16 Smbus1BaseAddress; + UINT32 SioPmeBaseAddress; + UINT32 WatchDogTimerBase; + UINT32 SpiRomBaseAddress; + + UINT16 AcpiPm1EvtBlkAddr; + UINT16 AcpiPm1CntBlkAddr; + UINT16 AcpiPmTmrBlkAddr; + UINT16 CpuControlBlkAddr; + UINT16 AcpiGpe0BlkAddr; + UINT16 SmiCmdPortAddr; + UINT16 AcpiPmaCntBlkAddr; + + UINT16 EcLdn5MailBoxAddr; + UINT8 EcLdn5Irq; + UINT16 EcLdn9MailBoxAddr; + UINT32 ReservedDword0; + UINT32 ReservedDword1; + UINT32 ReservedDword2; + UINT32 ReservedDword3; + + UINT32 HpetBase; //HPET Base address + + UINT32 SataIDESsid; + UINT32 SataRAIDSsid; + UINT32 SataRAID5Ssid; + UINT32 SataAHCISsid; + + UINT32 Ohci0Ssid; + UINT32 Ohci1Ssid; + UINT32 Ehci0Ssid; + UINT32 Ohci2Ssid; + UINT32 Ohci3Ssid; + UINT32 Ehci1Ssid; + UINT32 Ohci4Ssid; + UINT32 SmbusSsid; + UINT32 IdeSsid; + UINT32 AzaliaSsid; + UINT32 LpcSsid; + UINT32 P2PSsid; +}BUILDPARAM; + +typedef struct _CODECENTRY{ + UINT8 Nid; + UINT32 Byte40; +}CODECENTRY; + +typedef struct _CODECTBLLIST{ + UINT32 CodecID; + CODECENTRY* CodecTablePtr; +}CODECTBLLIST; + +typedef struct _AMDSBCFG +{ + STDCFG StdHeader; //offset 0:16 - 17 bytes + //UINT32 MsgXchgBiosCimx; //offset 17:20 - 4 bytes + UINT32 S3Resume:1; + UINT32 RebootRequired:1; + UINT32 Spi33Mhz:1; + UINT32 SpreadSpectrum:1; + UINT32 UsbIntClock:1; //0:Use external clock, 1:Use internal clock + UINT32 PciClk5:1; //0:disable, 1:enable + UINT32 TimerClockSource:2; //0:100Mhz PCIE Reference clock (same as SB700-A12, + //1: 14Mhz using 25M_48M_66M_OSC pin, 2: Auto (100Mhz for SB700-A12, 14Mhz + //using 25M_48m_66m_0SC pin for SB700-A14, SB710, SP5100 + UINT32 ResetCpuOnSyncFlood:1; //0:Reset CPU on Sync Flood, 1:Do not reset CPU on sync flood + UINT32 MsgXchgBiosCimxDummyBB:23; + + /** BuildParameters - The STATIC platform information for CIMx Module. */ + BUILDPARAM BuildParameters; + + //SATA Configuration + UINT32 SataController :1; //0, 0:disable 1:enable* //offset 25:28 - 4 bytes + UINT32 SataClass :3; //1, 0:IDE* 1:RAID 2:AHCI 3:Legacy IDE 4:IDE->AHCI 5:AMD_AHCI, 6:IDE->AMD_AHCI + UINT32 SataSmbus :1; //4, 0:disable 1:enable* + UINT32 SataAggrLinkPmCap:1; //5, 0:OFF 1:ON + UINT32 SataPortMultCap :1; //6, 0:OFF 1:ON + UINT32 SataReserved :2; //8:7, Reserved + UINT32 SataClkAutoOff :1; //9, AutoClockOff for IDE modes 0:Disabled, 1:Enabled + UINT32 SataIdeCombinedMode :1; //10, SataIDECombinedMode 0:Disabled, 1:Enabled + UINT32 SataIdeCombMdPriSecOpt:1; //11, Combined Mode, SATA as primary or secondary 0:primary 1:secondary + UINT32 SataReserved1 :6; //17:12, Not used currently + UINT32 SataEspPort :6; //23:18 SATA port is external accessiable on a signal only connector (eSATA:) + UINT32 SataClkAutoOffAhciMode:1; //24: Sata Auto clock off for AHCI mode + UINT32 SataHpcpButNonESP:6; //25:30 Hotplug capable but not e-sata port + UINT32 SataHideUnusedPort:1; //31, 0:Disabled 1:Enabled + + //Flash Configuration //offset 29:30 - 2 bytes + UINT16 FlashController :1; //0, 0:disable FC & enable IDE 1:enable FC & disable IDE + UINT16 FlashControllerMode:1; //1, 0:Flash behind SATA 1:Flash as standalone + UINT16 FlashHcCrc:1; //2, + UINT16 FlashErrorMode:1; //3 + UINT16 FlashNumOfBankMode:1; //4 + UINT16 FlashDummy:11; //5:15 + + //USB Configuration //offset 31:32 - 2 bytes + UINT16 Usb1Ohci0 :1; //0, 0:disable 1:enable* Bus 0 Dev 18 Func0 + UINT16 Usb1Ohci1 :1; //1, 0:disable 1:enable* Bus 0 Dev 18 Func1 + UINT16 Usb1Ehci :1; //2, 0:disable 1:enable* Bus 0 Dev 18 Func2 + UINT16 Usb2Ohci0 :1; //3, 0:disable 1:enable* Bus 0 Dev 19 Func0 + UINT16 Usb2Ohci1 :1; //4, 0:disable 1:enable* Bus 0 Dev 19 Func1 + UINT16 Usb2Ehci :1; //5, 0:disable 1:enable* Bus 0 Dev 19 Func2 + UINT16 Usb3Ohci :1; //6, 0:disable 1:enable* Bus 0 Dev 20 Func5 + UINT16 UsbOhciLegacyEmulation:1; //7, 0:Enabled, 1:Disabled + UINT16 UsbDummy :8; //8:15 + + //Azalia Configuration //offset 33:36 - 4 bytes + UINT32 AzaliaController:2; //0, 0:AUTO, 1:disable, 2:enable + UINT32 AzaliaPinCfg :1; //2, 0:disable, 1:enable + UINT32 AzaliaFrontPanel:2; //3, 0:AUTO, 1:disable, 2:enable + UINT32 FrontPanelDetected:1; //5, 0:Not detected, 1:detected + UINT32 AzaliaSdin0 :2; //6 + UINT32 AzaliaSdin1 :2; //8 + UINT32 AzaliaSdin2 :2; //10 + UINT32 AzaliaSdin3 :2; //12 + UINT32 AzaliaDummy :18; //14:31 + + CODECTBLLIST* pAzaliaOemCodecTablePtr; //offset 37:40 - 4 bytes + UINT32 pAzaliaOemFpCodecTableptr; //offset 41:44 - 4 bytes + + //Miscellaneous Configuration //offset 45:48 - 4 bytes + UINT32 MiscReserved0:1; //0 + UINT32 HpetTimer:1; //1, 0:disable 1:enable + UINT32 PciClks:5; //2:6, 0:disable, 1:enable + UINT32 MiscReserved1:3; //9:7, Reserved + UINT32 IdeController:1; //10, 0:Enable, 1:Disabled + UINT32 MobilePowerSavings:1; //11, 0:Disable, 1:Enable Power saving features especially for Mobile platform + UINT32 ExternalRTCClock:1; //12, 0:Don't Shut Off, 1:Shut Off, external RTC clock + UINT32 AcpiS1Supported:1; //13, 0:S1 not supported, 1:S1 supported + UINT32 AnyHT200MhzLink:1; //14, 0:No HT 200Mhz Link in platform, 1; There is 200MHz HT Link in platform + UINT32 WatchDogTimerEnable:1; //15, [0]: WDT disabled; 1: WDT enabled + UINT32 MTC1e:1; //16, Message Triggered C1e - 0:Disabled*, 1:Enabled + UINT32 HpetMsiDis:1; //17, HPET MSI - 0:Enable HPET MSI, 1:Disable + UINT32 EhciDataCacheDis:1; //18, 0:Date Cache Enabled, 1:Date Cache Disabled /** EHCI Async Data Cache Disable */ + UINT32 MiscDummy:13; + + UINT32 AsmAslInfoExchange0; //offset 49:52 - 4 bytes + UINT32 AsmAslInfoExchange1; //offset 53:56 + + //DebugOptions_1 //offset 57:60 + UINT32 FlashPinConfig :1; //0, 0:desktop mode 1:mobile mode + UINT32 UsbPhyPowerDown :1; //1 + UINT32 PcibClkStopOverride :10; //11:2 + UINT32 Debug1Reserved0:4; //15:11 + UINT32 AzaliaSnoop:1; //16 0:Disable, 1:Enable + UINT32 SataSscPscCap:1; //17, 0:Enable SSC/PSC capability, 1:Disable SSC/PSC capability + UINT32 SataPortMode:6; //23:18, 0: AUTO, 1:Force SATA port(6/5/4/3/2/1) to GEN1 + UINT32 SataPhyWorkaround:2; //25:24, 0:AUTO, 1:Enable, 2:Disable + UINT32 Gen1DeviceShutdownDuringPhyWrknd:2; //27:26, 0:AUTO, 1:YES, 2:NO + UINT32 OhciIsoOutPrefetchDis:1; //28, 0:Enable OHCI ISO OUT prefetch, 1:Disable + UINT32 Debug1Dummy:3; // + + //DebugOptions_2 + UINT32 PcibAutoClkCtrlLow:16; + UINT32 PcibAutoClkCtrlHigh:16; + + //TempMMIO + UINT32 TempMMIO:32; + +}AMDSBCFG; + +typedef struct _SMMSERVICESTRUC +{ + UINT8 enableRegNum; + UINT8 enableBit; + UINT8 statusRegNum; + UINT8 statusBit; + CHAR8 *debugMessage; + SMM_SERVICE_ROUTINE serviceRoutine; +}SMMSERVICESTRUC; + +typedef struct _ABTblEntry +{ + UINT8 regType; + UINT32 regIndex; + UINT32 regMask; + UINT32 regData; +}ABTBLENTRY; + +#define PCI_ADDRESS(bus,dev,func,reg) \ +(UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) + +typedef UINT32 CIM_STATUS; +#define CIM_SUCCESS 0x00000000 +#define CIM_ERROR 0x80000000 +#define CIM_UNSUPPORTED 0x80000001 + +#pragma pack(pop) + +#define CIMX_OPTION_DISABLED 0 +#define CIMX_OPTION_ENABLED 1 + +#endif // _AMD_SBTYPE_H_ diff --git a/src/vendorcode/amd/cimx/sb700/SMM.c b/src/vendorcode/amd/cimx/sb700/SMM.c new file mode 100644 index 0000000000..0d752fb13a --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/SMM.c @@ -0,0 +1,91 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + +SMMSERVICESTRUC smmItemsTable[]={ + {SB_PMIO_REG0E, BIT2, SB_PMIO_REG0F, BIT2, (CHAR8 *)"Software SMI through SMI CMD port \n ", softwareSMIservice}, + {SB_PMIO_REG00, BIT4, SB_PMIO_REG01, BIT4, (CHAR8 *)"Software initiated SMI \n ", NULL}, + {SB_PMIO_REG02, 0xFF, SB_PMIO_REG05, 0xFF, (CHAR8 *)"SMI on IRQ15-8 \n ", NULL}, + {SB_PMIO_REG03, 0xFF, SB_PMIO_REG06, 0xFF, (CHAR8 *)"SMI on IRQ7-0 \n ", NULL}, + {SB_PMIO_REG04, 0xFF, SB_PMIO_REG07, 0xFF, (CHAR8 *)"SMI on legacy devices activity(Serial, FDD etc) \n ", NULL}, + {SB_PMIO_REG1C, 0xFF, SB_PMIO_REG1D, 0xFF, (CHAR8 *)"SMI on PIO 0123 \n ", NULL}, + {SB_PMIO_REGA8, 0x0F, SB_PMIO_REGA9, 0xFF, (CHAR8 *)"SMI on PIO 4567 \n ", NULL}, +}; + + +/*++ + +Routine Description: + + SB SMI service + +Arguments: + + pConfig - SBconfiguration + +Returns: + + void + +--*/ + +void sbSmmService(AMDSBCFG* pConfig){ + UINT8 i, dbEnableValue, dbStatusValue; + SMMSERVICESTRUC *pSmmItems; + SMM_SERVICE_ROUTINE serviceRoutine; + + pSmmItems = (SMMSERVICESTRUC *)FIXUP_PTR(&smmItemsTable[0]); + TRACE((DMSG_SB_TRACE, "CIMx - Entering SMM services \n")); + for (i = 1; i <= (sizeof(smmItemsTable)/sizeof(SMMSERVICESTRUC)); i++){ + dbEnableValue = pSmmItems->enableRegNum; + ReadPMIO(pSmmItems->enableRegNum, AccWidthUint8, &dbEnableValue); + ReadPMIO(pSmmItems->statusRegNum, AccWidthUint8, &dbStatusValue); + if ( (dbEnableValue & (pSmmItems->enableBit)) && (dbStatusValue & (pSmmItems->statusBit)) ){ + TRACE((DMSG_SB_TRACE, "\n \nSmi source is: %s \n", pSmmItems->debugMessage)); + TRACE((DMSG_SB_TRACE, "Enable Reg:%d Value:%d\n", pSmmItems->enableRegNum, dbEnableValue)); + TRACE((DMSG_SB_TRACE, "Status Reg:%d Value:%d\n\n", pSmmItems->statusRegNum, dbStatusValue)); + if ( (pSmmItems->serviceRoutine)!= NULL){ + serviceRoutine = (void *)FIXUP_PTR(pSmmItems->serviceRoutine); + serviceRoutine(); + } + } + } + TRACE((DMSG_SB_TRACE, "CIMx - Exiting SMM services \n")); +} + + +void softwareSMIservice(void){ + UINT16 dwSmiCmdPort, dwVar; + ReadPMIO(SB_PMIO_REG2A, AccWidthUint16, &dwSmiCmdPort); + ReadIO(dwSmiCmdPort, AccWidthUint16, &dwVar); + TRACE((DMSG_SB_TRACE, "SMI CMD Port Address: %X SMICMD Port value is %X \n", dwSmiCmdPort, dwVar)); +} diff --git a/src/vendorcode/amd/cimx/sb700/USB.c b/src/vendorcode/amd/cimx/sb700/USB.c new file mode 100644 index 0000000000..9c5e7b3be4 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/USB.c @@ -0,0 +1,187 @@ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + ***************************************************************************/ + + +#include "Platform.h" + + +void usbInitBeforePciEnum(AMDSBCFG* pConfig){ + UINT8 dbVar=0; + + TRACE((DMSG_SB_TRACE, "Entering PreInit Usb \n")); + if (pConfig->Usb1Ohci0){ + dbVar = (pConfig->Usb1Ehci << 2); + dbVar |= ((pConfig->Usb1Ohci0) << 0); + dbVar |= ((pConfig->Usb1Ohci1) << 1); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT0+BIT1+BIT2), dbVar ); + } + if (pConfig->Usb2Ohci0){ + dbVar = (pConfig->Usb2Ehci << 6) ; + dbVar |= ((pConfig->Usb2Ohci0) << 4); + dbVar |= ((pConfig->Usb2Ohci1) << 5); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT6+BIT4+BIT5), dbVar ); + } + if (pConfig->Usb3Ohci) + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG68, AccWidthUint8 | S3_SAVE, ~(UINT32)(BIT7), ((pConfig->Usb3Ohci) << 7) ); + + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+1, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT4), BIT4); +} + + +void usbInitAfterPciInit(AMDSBCFG* pConfig){ + UINT32 ddBarAddress, ddVar; + + ReadPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + if ( (ddBarAddress != -1) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG04, AccWidthUint8, 0, BIT1); + //USB Common PHY CAL & Control Register setting + ddVar = 0x00020F00; + WriteMEM(ddBarAddress+SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar); + //RPR - IN AND OUT DATA PACKET FIFO THRESHOLD + //EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 + RWMEM(ddBarAddress+SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040); + //RPR - EHCI dynamic clock gating feature + //EHCI_BAR 0xBC Bit[12] = 0, For normal operation, the clock gating feature must be disabled. + // Disables HS uFrame babble detection for erratum: EHCI_EOR + 9Ch [11] = 1 + RWMEM(ddBarAddress+SB_EHCI_BAR_REGBC, AccWidthUint16, ~(UINT32)(BIT12+BIT11), BIT11); + } + + ReadPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + if ( (ddBarAddress != -1) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG04, AccWidthUint8, 0, BIT1); + //USB Common PHY CAL & Control Register setting + ddVar = 0x00020F00; + WriteMEM(ddBarAddress+SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar); + //RPR - IN AND OUT DATA PACKET FIFO THRESHOLD + //EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 + RWMEM(ddBarAddress+SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040); + //RPR - EHCI dynamic clock gating feature + //EHCI_BAR 0xBC Bit[12] = 0, For normal operation, the clock gating feature must be disabled. + // Disables HS uFrame babble detection for erratum: EHCI_EOR + 9Ch [11] = 1 + RWMEM(ddBarAddress+SB_EHCI_BAR_REGBC, AccWidthUint16, ~(UINT32)(BIT12+BIT11), BIT11); + } + + if (pConfig->UsbPhyPowerDown) + RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, BIT0); + else + RWPMIO(SB_PMIO_REG65, AccWidthUint8 | S3_SAVE, ~(UINT32)BIT0, 0); + + // Disable the MSI capability of USB host controllers + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG40+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + + //RPR recommended setting "EHCI Advance Asynchronous Enhancement DISABLE" + //Set EHCI_pci_configx50[28]='1' to disable the advance async enhancement feature to avoid the bug found in Linux. + //Set EHCI_pci_configx50[6]='1' to disable EHCI MSI support + //RPR recommended setting "EHCI Async Park Mode" + //Set EHCI_pci_configx50[23]='1' to disable "EHCI Async Park Mode support" + // RPR recommended setting "EHCI Advance PHY Power Savings" + // Set EHCI_pci_configx50[31]='1' if SB700 A12 & above + // Fix for EHCI controller driver yellow sign issue under device manager + // when used in conjunction with HSET tool driver. EHCI PCI config 0x50[20]=1 + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT31+BIT28+BIT23+BIT20+BIT6); + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT31+BIT28+BIT23+BIT20+BIT6); + + //RPR recommended setting to, enable fix to cover the corner case S3 wake up issue from some USB 1.1 devices + //OHCI 0_PCI_Config 0x50[16] = 1 + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT0); + + if (getRevisionID() >= SB700_A14){ + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT28), BIT8+BIT7+BIT4+BIT3); + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)(BIT28), BIT8+BIT7+BIT4+BIT3); + + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25+BIT17); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25+BIT17); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, BIT26+BIT25); + } + + if (getRevisionID() >= SB700_A15) { + //USB PID Error checking + RWPCI((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1); + RWPCI((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50+1, AccWidthUint8 | S3_SAVE, 0xFF, BIT1); + } + + // RPR 6.25 - Optionally disable OHCI isochronous out prefetch + if (pConfig->OhciIsoOutPrefetchDis) { + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint16 | S3_SAVE, ~(UINT32)(BIT9 + BIT8), 0); + } + + if ( pConfig->EhciDataCacheDis ) { + // Disable Async Data Cache, EHCI_pci_configx50[26]='1' + RWPCI ((USB1_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)BIT26, BIT26); + RWPCI ((USB2_EHCI_BUS_DEV_FUN << 16) + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(UINT32)BIT26, BIT26); + } +} + + +void usbInitMidPost(AMDSBCFG* pConfig){ + if (pConfig->UsbOhciLegacyEmulation == 0){ + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG60+2, AccWidthUint8 | S3_SAVE, 0xFF, BIT1+BIT0); + RWPCI((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REG64+3, AccWidthUint8 | S3_SAVE, 0xFF, BIT7); + } + else{ + programOhciMmioForEmulation(); + } +} + + +void programOhciMmioForEmulation(void){ + UINT32 ddBarAddress; + + ReadPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + ddBarAddress &= 0xFFFFF000; + if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB1_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); + RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); + } + + ReadPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + ddBarAddress &= 0xFFFFF000; + if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB2_OHCI0_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); + RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); + } + + ReadPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG10, AccWidthUint32, &ddBarAddress);//Get BAR address + if ( (ddBarAddress != 0xFFFFF000) && (ddBarAddress != 0) ){ + //Enable Memory access + RWPCI((USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG04, AccWidthUint8, 0, BIT1); + RWMEM(ddBarAddress+SB_OHCI_BAR_REG160, AccWidthUint32, 0, 0); + } +} diff --git a/src/vendorcode/amd/cimx/sb700/sbAMDLIB.h b/src/vendorcode/amd/cimx/sb700/sbAMDLIB.h new file mode 100644 index 0000000000..e8f6b38a77 --- /dev/null +++ b/src/vendorcode/amd/cimx/sb700/sbAMDLIB.h @@ -0,0 +1,196 @@ +/*;******************************************************************************** +; +; Copyright (C) 2012 Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;*********************************************************************************/ + +#ifndef _AMD_AMDLIB_H_ +#define _AMD_AMDLIB_H_ + +typedef CHAR8 *va_list; +#ifndef _INTSIZEOF + #define _INTSIZEOF(n)( (sizeof(n) + sizeof(UINTN) - 1) & ~(sizeof(UINTN) - 1) ) +#endif + +// Also support coding convention rules for var arg macros +#ifndef va_start +#define va_start(ap,v) ( ap = (va_list)&(v) + _INTSIZEOF(v) ) +#endif +#define va_arg(ap,t) ( *(t *)((ap += _INTSIZEOF(t)) - _INTSIZEOF(t)) ) +#define va_end(ap) ( ap = (va_list)0 ) + +#ifndef CIMx_DEBUG + #define CIMx_DEBUG 0 +#endif + + +#pragma pack(push,1) + +#define IMAGE_ALIGN 32*1024 +#define NUM_IMAGE_LOCATION 32 + +//Entry Point Call +typedef void (*CIM_IMAGE_ENTRY)(void* pConfig); + +//Hook Call + +typedef struct _Reg8Mask +{ + UINT8 bRegIndex; + UINT8 bANDMask; + UINT8 bORMask; +}REG8MASK; + + +typedef struct _CIMFILEHEADER{ + UINT32 AtiLogo; + UINT32 EntryPoint; + UINT32 ModuleLogo; + UINT32 ImageSize; + UINT16 Version; + UINT8 CheckSum; + UINT8 Reserved1; + UINT32 Reserved2; +}CIMFILEHEADER; + +typedef struct _CPUID_DATA{ + UINT32 REG_EAX; + UINT32 REG_EBX; + UINT32 REG_ECX; + UINT32 REG_EDX; +}CPUID_DATA; + +#ifndef BIT0 + #define BIT0 (1 << 0) +#endif +#ifndef BIT1 + #define BIT1 (1 << 1) +#endif +#ifndef BIT2 + #define BIT2 (1 << 2) +#endif +#ifndef BIT3 + #define BIT3 (1 << 3) +#endif +#ifndef BIT4 + #define BIT4 (1 << 4) +#endif +#ifndef BIT5 + #define BIT5 (1 << 5) +#endif +#ifndef BIT6 + #define BIT6 (1 << 6) +#endif +#ifndef BIT7 + #define BIT7 (1 << 7) +#endif +#ifndef BIT8 + #define BIT8 (1 << 8) +#endif +#ifndef BIT9 + #define BIT9 (1 << 9) +#endif +#ifndef BIT10 + #define BIT10 (1 << 10) +#endif +#ifndef BIT11 + #define BIT11 (1 << 11) +#endif +#ifndef BIT12 + #define BIT12 (1 << 12) +#endif +#ifndef BIT13 + #define BIT13 (1 << 13) +#endif +#ifndef BIT14 + #define BIT14 (1 << 14) +#endif +#ifndef BIT15 + #define BIT15 (1 << 15) +#endif +#ifndef BIT16 + #define BIT16 (1 << 16) +#endif +#ifndef BIT17 + #define BIT17 (1 << 17) +#endif +#ifndef BIT18 + #define BIT18 (1 << 18) +#endif +#ifndef BIT19 + #define BIT19 (1 << 19) +#endif +#ifndef BIT20 + #define BIT20 (1 << 20) +#endif +#ifndef BIT21 + #define BIT21 (1 << 21) +#endif +#ifndef BIT22 + #define BIT22 (1 << 22) +#endif +#ifndef BIT23 + #define BIT23 (1 << 23) +#endif +#ifndef BIT24 + #define BIT24 (1 << 24) +#endif +#ifndef BIT25 + #define BIT25 (1 << 25) +#endif +#ifndef BIT26 + #define BIT26 (1 << 26) +#endif +#ifndef BIT27 + #define BIT27 (1 << 27) +#endif +#ifndef BIT28 + #define BIT28 (1 << 28) +#endif +#ifndef BIT29 + #define BIT29 (1 << 29) +#endif +#ifndef BIT30 + #define BIT30 (1 << 30) +#endif +#ifndef BIT31 + #define BIT31 (1 << 31) +#endif + +#define PCI_ADDRESS(bus,dev,func,reg) \ +(UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) ) + +#pragma pack(pop) + +typedef enum { + AccWidthUint8 = 0, + AccWidthUint16, + AccWidthUint32, +} ACC_WIDTH; + +#define S3_SAVE 0x80 + +#endif //#ifndef _AMD_AMDLIB_H_ |