diff options
Diffstat (limited to 'src/vendorcode/intel')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h | 16 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h | 673 |
2 files changed, 345 insertions, 344 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h index 8f40c14067..32b6a327b5 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h @@ -251,7 +251,7 @@ typedef struct { UINT8 Reserved1[3]; /** Offset 0x0130 - Intel Enhanced Debug - DEPRECATED + <b>@deprecated</b> - Not used and has no effect 0 : Disable, 0x400000 : Enable **/ UINT32 IedSize; @@ -310,8 +310,8 @@ typedef struct { **/ UINT8 DciDbcMode; -/** Offset 0x014F - Enable DCI ModPHY Pwoer Gate - Enable ModPHY Pwoer Gate when DCI is enabled +/** Offset 0x014F - Enable DCI ModPHY Power Gate + Enable ModPHY Power Gate when DCI is enabled $EN_DIS **/ UINT8 DciModphyPg; @@ -797,7 +797,7 @@ typedef struct { **/ UINT8 RealtimeMemoryTiming; -/** Offset 0x025A - This is policy to control iTBT PCIe Multiple Segment setting. +/** Offset 0x025A - iTBT PCIe Multiple Segment setting When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable. $EN_DIS @@ -1468,7 +1468,7 @@ typedef struct { **/ UINT8 PchSataHsioTxGen3DeEmph[8]; -/** Offset 0x056F - PCH LPC Enhance the port 8xh decoding +/** Offset 0x056F - PCH LPC Enhanced Port 80 Decoding Original LPC only decodes one byte of port 80h. $EN_DIS **/ @@ -1476,7 +1476,7 @@ typedef struct { /** Offset 0x0570 - PCH Port80 Route Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. - $EN_DIS + 0:LPC, 1:PCI **/ UINT8 PchPort80Route; @@ -2036,7 +2036,7 @@ typedef struct { UINT16 ChHashMask; /** Offset 0x0630 - Base reference clock value - Base reference clock value, in Hertz(Default is 125Hz) + Base reference clock value, in Hertz(Default is 100Hz) 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz **/ UINT32 BClkFrequency; @@ -2508,7 +2508,7 @@ typedef struct { /** Offset 0x0920 **/ - UINT8 UnusedUpdSpace25[6]; + UINT8 UnusedUpdSpace26[6]; /** Offset 0x0926 **/ diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h index c7086cd4a6..b0d9ca9f80 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h @@ -1190,7 +1190,7 @@ typedef struct { **/ UINT8 Reserved28[10]; -/** Offset 0x0555 - Enable multi phases silicon initial +/** Offset 0x0555 - Enable multi phases silicon initialization A switch to determine MultiPhaseSiInit will be executed or not $EN_DIS **/ @@ -1340,796 +1340,796 @@ typedef struct { /** Offset 0x05DE - Reserved **/ - UINT8 Reserved33[8]; + UINT8 Reserved33[10]; -/** Offset 0x05E6 - Enable Power Optimizer +/** Offset 0x05E8 - Enable Power Optimizer Enable DMI Power Optimizer on PCH side. $EN_DIS **/ UINT8 PchPwrOptEnable; -/** Offset 0x05E7 - PCH Flash Protection Ranges Write Enble +/** Offset 0x05E9 - PCH Flash Protection Ranges Write Enble Write or erase is blocked by hardware. **/ UINT8 PchWriteProtectionEnable[5]; -/** Offset 0x05EC - PCH Flash Protection Ranges Read Enble +/** Offset 0x05EE - PCH Flash Protection Ranges Read Enble Read is blocked by hardware. **/ UINT8 PchReadProtectionEnable[5]; -/** Offset 0x05F1 - Reserved +/** Offset 0x05F3 - Reserved **/ UINT8 Reserved34; -/** Offset 0x05F2 - PCH Protect Range Limit +/** Offset 0x05F4 - PCH Protect Range Limit Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for limit comparison. **/ UINT16 PchProtectedRangeLimit[5]; -/** Offset 0x05FC - PCH Protect Range Base +/** Offset 0x05FE - PCH Protect Range Base Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. **/ UINT16 PchProtectedRangeBase[5]; -/** Offset 0x0606 - Enable Pme +/** Offset 0x0608 - Enable Pme Enable Azalia wake-on-ring. $EN_DIS **/ UINT8 PchHdaPme; -/** Offset 0x0607 - HD Audio Link Frequency +/** Offset 0x0609 - HD Audio Link Frequency HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. 0: 6MHz, 1: 12MHz, 2: 24MHz **/ UINT8 PchHdaLinkFrequency; -/** Offset 0x0608 - Reserved +/** Offset 0x060A - Reserved **/ UINT8 Reserved35[3]; -/** Offset 0x060B - Enable PCH ISH SPI Cs0 pins assigned +/** Offset 0x060D - Enable PCH ISH SPI Cs0 pins assigned Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable. **/ UINT8 PchIshSpiCs0Enable[1]; -/** Offset 0x060C - Enable PCH Io Apic Entry 24-119 +/** Offset 0x060E - Enable PCH Io Apic Entry 24-119 0: Disable; 1: Enable. $EN_DIS **/ UINT8 PchIoApicEntry24_119; -/** Offset 0x060D - PCH Io Apic ID +/** Offset 0x060F - PCH Io Apic ID This member determines IOAPIC ID. Default is 0x02. **/ UINT8 PchIoApicId; -/** Offset 0x060E - Enable PCH ISH SPI pins assigned +/** Offset 0x0610 - Enable PCH ISH SPI pins assigned Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable. **/ UINT8 PchIshSpiEnable[1]; -/** Offset 0x060F - Enable PCH ISH UART pins assigned +/** Offset 0x0611 - Enable PCH ISH UART pins assigned Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable. **/ UINT8 PchIshUartEnable[2]; -/** Offset 0x0611 - Enable PCH ISH I2C pins assigned +/** Offset 0x0613 - Enable PCH ISH I2C pins assigned Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. **/ UINT8 PchIshI2cEnable[3]; -/** Offset 0x0614 - Enable PCH ISH GP pins assigned +/** Offset 0x0616 - Enable PCH ISH GP pins assigned Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable. **/ UINT8 PchIshGpEnable[8]; -/** Offset 0x061C - PCH ISH PDT Unlock Msg +/** Offset 0x061E - PCH ISH PDT Unlock Msg 0: False; 1: True. $EN_DIS **/ UINT8 PchIshPdtUnlock; -/** Offset 0x061D - Enable PCH Lan LTR capabilty of PCH internal LAN +/** Offset 0x061F - Enable PCH Lan LTR capabilty of PCH internal LAN 0: Disable; 1: Enable. $EN_DIS **/ UINT8 PchLanLtrEnable; -/** Offset 0x061E - Enable LOCKDOWN BIOS LOCK +/** Offset 0x0620 - Enable LOCKDOWN BIOS LOCK Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region protection. $EN_DIS **/ UINT8 PchLockDownBiosLock; -/** Offset 0x061F - PCH Compatibility Revision ID +/** Offset 0x0621 - PCH Compatibility Revision ID This member describes whether or not the CRID feature of PCH should be enabled. $EN_DIS **/ UINT8 PchCrid; -/** Offset 0x0620 - Reserved +/** Offset 0x0622 - Reserved **/ UINT8 Reserved36; -/** Offset 0x0621 - RTC Cmos Memory Lock +/** Offset 0x0623 - RTC Cmos Memory Lock Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper and and lower 128-byte bank of RTC RAM. $EN_DIS **/ UINT8 RtcMemoryLock; -/** Offset 0x0622 - Enable PCIE RP HotPlug +/** Offset 0x0624 - Enable PCIE RP HotPlug Indicate whether the root port is hot plug available. **/ UINT8 PcieRpHotPlug[24]; -/** Offset 0x063A - Enable PCIE RP Pm Sci +/** Offset 0x063C - Enable PCIE RP Pm Sci Indicate whether the root port power manager SCI is enabled. **/ UINT8 PcieRpPmSci[24]; -/** Offset 0x0652 - Enable PCIE RP Transmitter Half Swing +/** Offset 0x0654 - Enable PCIE RP Transmitter Half Swing Indicate whether the Transmitter Half Swing is enabled. **/ UINT8 PcieRpTransmitterHalfSwing[24]; -/** Offset 0x066A - Enable PCIE RP Clk Req Detect +/** Offset 0x066C - Enable PCIE RP Clk Req Detect Probe CLKREQ# signal before enabling CLKREQ# based power management. **/ UINT8 PcieRpClkReqDetect[24]; -/** Offset 0x0682 - PCIE RP Advanced Error Report +/** Offset 0x0684 - PCIE RP Advanced Error Report Indicate whether the Advanced Error Reporting is enabled. **/ UINT8 PcieRpAdvancedErrorReporting[24]; -/** Offset 0x069A - PCIE RP Unsupported Request Report +/** Offset 0x069C - PCIE RP Unsupported Request Report Indicate whether the Unsupported Request Report is enabled. **/ UINT8 PcieRpUnsupportedRequestReport[24]; -/** Offset 0x06B2 - PCIE RP Fatal Error Report +/** Offset 0x06B4 - PCIE RP Fatal Error Report Indicate whether the Fatal Error Report is enabled. **/ UINT8 PcieRpFatalErrorReport[24]; -/** Offset 0x06CA - PCIE RP No Fatal Error Report +/** Offset 0x06CC - PCIE RP No Fatal Error Report Indicate whether the No Fatal Error Report is enabled. **/ UINT8 PcieRpNoFatalErrorReport[24]; -/** Offset 0x06E2 - PCIE RP Correctable Error Report +/** Offset 0x06E4 - PCIE RP Correctable Error Report Indicate whether the Correctable Error Report is enabled. **/ UINT8 PcieRpCorrectableErrorReport[24]; -/** Offset 0x06FA - PCIE RP System Error On Fatal Error +/** Offset 0x06FC - PCIE RP System Error On Fatal Error Indicate whether the System Error on Fatal Error is enabled. **/ UINT8 PcieRpSystemErrorOnFatalError[24]; -/** Offset 0x0712 - PCIE RP System Error On Non Fatal Error +/** Offset 0x0714 - PCIE RP System Error On Non Fatal Error Indicate whether the System Error on Non Fatal Error is enabled. **/ UINT8 PcieRpSystemErrorOnNonFatalError[24]; -/** Offset 0x072A - PCIE RP System Error On Correctable Error +/** Offset 0x072C - PCIE RP System Error On Correctable Error Indicate whether the System Error on Correctable Error is enabled. **/ UINT8 PcieRpSystemErrorOnCorrectableError[24]; -/** Offset 0x0742 - PCIE RP Max Payload +/** Offset 0x0744 - PCIE RP Max Payload Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. **/ UINT8 PcieRpMaxPayload[24]; -/** Offset 0x075A - Touch Host Controller Port 0 Assignment +/** Offset 0x075C - Touch Host Controller Port 0 Assignment Assign THC Port 0 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0 **/ UINT8 ThcPort0Assignment; -/** Offset 0x075B - Reserved +/** Offset 0x075D - Reserved **/ - UINT8 Reserved37[5]; + UINT8 Reserved37[7]; -/** Offset 0x0760 - Touch Host Controller Port 1 Assignment +/** Offset 0x0764 - Touch Host Controller Port 1 Assignment Assign THC Port 1 0x0:ThcAssignmentNone, 0x1:ThcPort1AssignmentThc0, 0x2:ThcAssignmentThc1 **/ UINT8 ThcPort1Assignment; -/** Offset 0x0761 - Reserved +/** Offset 0x0765 - Reserved **/ UINT8 Reserved38[7]; -/** Offset 0x0768 - PCIE RP Pcie Speed +/** Offset 0x076C - PCIE RP Pcie Speed Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: PCIE_SPEED). **/ UINT8 PcieRpPcieSpeed[24]; -/** Offset 0x0780 - PCIE RP Physical Slot Number +/** Offset 0x0784 - PCIE RP Physical Slot Number Indicates the slot number for the root port. Default is the value as root port index. **/ UINT8 PcieRpPhysicalSlotNumber[24]; -/** Offset 0x0798 - PCIE RP Completion Timeout +/** Offset 0x079C - PCIE RP Completion Timeout The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default. **/ UINT8 PcieRpCompletionTimeout[24]; -/** Offset 0x07B0 - PCIE RP Aspm +/** Offset 0x07B4 - PCIE RP Aspm The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is PchPcieAspmAutoConfig. **/ UINT8 PcieRpAspm[24]; -/** Offset 0x07C8 - PCIE RP L1 Substates +/** Offset 0x07CC - PCIE RP L1 Substates The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). Default is PchPcieL1SubstatesL1_1_2. **/ UINT8 PcieRpL1Substates[24]; -/** Offset 0x07E0 - PCIE RP Ltr Enable +/** Offset 0x07E4 - PCIE RP Ltr Enable Latency Tolerance Reporting Mechanism. **/ UINT8 PcieRpLtrEnable[24]; -/** Offset 0x07F8 - PCIE RP Ltr Config Lock +/** Offset 0x07FC - PCIE RP Ltr Config Lock 0: Disable; 1: Enable. **/ UINT8 PcieRpLtrConfigLock[24]; -/** Offset 0x0810 - Reserved +/** Offset 0x0814 - Reserved **/ UINT8 Reserved39[45]; -/** Offset 0x083D - PCIE Enable Peer Memory Write +/** Offset 0x0841 - PCIE Enable Peer Memory Write This member describes whether Peer Memory Writes are enabled on the platform. $EN_DIS **/ UINT8 PcieEnablePeerMemoryWrite; -/** Offset 0x083E - PCIE Compliance Test Mode +/** Offset 0x0842 - PCIE Compliance Test Mode Compliance Test Mode shall be enabled when using Compliance Load Board. $EN_DIS **/ UINT8 PcieComplianceTestMode; -/** Offset 0x083F - PCIE Rp Function Swap +/** Offset 0x0843 - PCIE Rp Function Swap Allows BIOS to use root port function number swapping when root port of function 0 is disabled. $EN_DIS **/ UINT8 PcieRpFunctionSwap; -/** Offset 0x0840 - Reserved +/** Offset 0x0844 - Reserved **/ UINT8 Reserved40[2]; -/** Offset 0x0842 - PCH Pm PME_B0_S5_DIS +/** Offset 0x0846 - PCH Pm PME_B0_S5_DIS When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. $EN_DIS **/ UINT8 PchPmPmeB0S5Dis; -/** Offset 0x0843 - PCIE IMR +/** Offset 0x0847 - PCIE IMR Enables Isolated Memory Region for PCIe. $EN_DIS **/ UINT8 PcieRpImrEnabled; -/** Offset 0x0844 - PCIE IMR port number +/** Offset 0x0848 - PCIE IMR port number Selects PCIE root port number for IMR feature. **/ UINT8 PcieRpImrSelection; -/** Offset 0x0845 - PCH Pm Wol Enable Override +/** Offset 0x0849 - PCH Pm Wol Enable Override Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. $EN_DIS **/ UINT8 PchPmWolEnableOverride; -/** Offset 0x0846 - PCH Pm Pcie Wake From DeepSx +/** Offset 0x084A - PCH Pm Pcie Wake From DeepSx Determine if enable PCIe to wake from deep Sx. $EN_DIS **/ UINT8 PchPmPcieWakeFromDeepSx; -/** Offset 0x0847 - PCH Pm WoW lan Enable +/** Offset 0x084B - PCH Pm WoW lan Enable Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. $EN_DIS **/ UINT8 PchPmWoWlanEnable; -/** Offset 0x0848 - PCH Pm WoW lan DeepSx Enable +/** Offset 0x084C - PCH Pm WoW lan DeepSx Enable Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the PWRM_CFG3 register. $EN_DIS **/ UINT8 PchPmWoWlanDeepSxEnable; -/** Offset 0x0849 - PCH Pm Lan Wake From DeepSx +/** Offset 0x084D - PCH Pm Lan Wake From DeepSx Determine if enable LAN to wake from deep Sx. $EN_DIS **/ UINT8 PchPmLanWakeFromDeepSx; -/** Offset 0x084A - PCH Pm Deep Sx Pol +/** Offset 0x084E - PCH Pm Deep Sx Pol Deep Sx Policy. $EN_DIS **/ UINT8 PchPmDeepSxPol; -/** Offset 0x084B - PCH Pm Slp S3 Min Assert +/** Offset 0x084F - PCH Pm Slp S3 Min Assert SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. **/ UINT8 PchPmSlpS3MinAssert; -/** Offset 0x084C - PCH Pm Slp S4 Min Assert +/** Offset 0x0850 - PCH Pm Slp S4 Min Assert SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. **/ UINT8 PchPmSlpS4MinAssert; -/** Offset 0x084D - PCH Pm Slp Sus Min Assert +/** Offset 0x0851 - PCH Pm Slp Sus Min Assert SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. **/ UINT8 PchPmSlpSusMinAssert; -/** Offset 0x084E - PCH Pm Slp A Min Assert +/** Offset 0x0852 - PCH Pm Slp A Min Assert SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. **/ UINT8 PchPmSlpAMinAssert; -/** Offset 0x084F - USB Overcurrent Override for DbC +/** Offset 0x0853 - USB Overcurrent Override for DbC This option overrides USB Over Current enablement state that USB OC will be disabled after enabling this option. Enable when DbC is used to avoid signaling conflicts. $EN_DIS **/ UINT8 PchEnableDbcObs; -/** Offset 0x0850 - PCH Pm Slp Strch Sus Up +/** Offset 0x0854 - PCH Pm Slp Strch Sus Up Enable SLP_X Stretching After SUS Well Power Up. $EN_DIS **/ UINT8 PchPmSlpStrchSusUp; -/** Offset 0x0851 - PCH Pm Slp Lan Low Dc +/** Offset 0x0855 - PCH Pm Slp Lan Low Dc Enable/Disable SLP_LAN# Low on DC Power. $EN_DIS **/ UINT8 PchPmSlpLanLowDc; -/** Offset 0x0852 - PCH Pm Pwr Btn Override Period +/** Offset 0x0856 - PCH Pm Pwr Btn Override Period PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. **/ UINT8 PchPmPwrBtnOverridePeriod; -/** Offset 0x0853 - PCH Pm Disable Dsx Ac Present Pulldown +/** Offset 0x0857 - PCH Pm Disable Dsx Ac Present Pulldown When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. $EN_DIS **/ UINT8 PchPmDisableDsxAcPresentPulldown; -/** Offset 0x0854 - PCH Pm Disable Native Power Button +/** Offset 0x0858 - PCH Pm Disable Native Power Button Power button native mode disable. $EN_DIS **/ UINT8 PchPmDisableNativePowerButton; -/** Offset 0x0855 - PCH Pm ME_WAKE_STS +/** Offset 0x0859 - PCH Pm ME_WAKE_STS Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. $EN_DIS **/ UINT8 PchPmMeWakeSts; -/** Offset 0x0856 - PCH Pm WOL_OVR_WK_STS +/** Offset 0x085A - PCH Pm WOL_OVR_WK_STS Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. $EN_DIS **/ UINT8 PchPmWolOvrWkSts; -/** Offset 0x0857 - PCH Pm Reset Power Cycle Duration +/** Offset 0x085B - PCH Pm Reset Power Cycle Duration Could be customized in the unit of second. Please refer to EDS for all support settings. 0 is default, 1 is 1 second, 2 is 2 seconds, ... **/ UINT8 PchPmPwrCycDur; -/** Offset 0x0858 - PCH Pm Pcie Pll Ssc +/** Offset 0x085C - PCH Pm Pcie Pll Ssc Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No BIOS override. **/ UINT8 PchPmPciePllSsc; -/** Offset 0x0859 - PCH Legacy IO Low Latency Enable +/** Offset 0x085D - PCH Legacy IO Low Latency Enable Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable $EN_DIS **/ UINT8 PchLegacyIoLowLatency; -/** Offset 0x085A - PCH Sata Pwr Opt Enable +/** Offset 0x085E - PCH Sata Pwr Opt Enable SATA Power Optimizer on PCH side. $EN_DIS **/ UINT8 SataPwrOptEnable; -/** Offset 0x085B - PCH Sata eSATA Speed Limit +/** Offset 0x085F - PCH Sata eSATA Speed Limit When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. $EN_DIS **/ UINT8 EsataSpeedLimit; -/** Offset 0x085C - PCH Sata Speed Limit +/** Offset 0x0860 - PCH Sata Speed Limit Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. **/ UINT8 SataSpeedLimit; -/** Offset 0x085D - Enable SATA Port HotPlug +/** Offset 0x0861 - Enable SATA Port HotPlug Enable SATA Port HotPlug. **/ UINT8 SataPortsHotPlug[8]; -/** Offset 0x0865 - Enable SATA Port Interlock Sw +/** Offset 0x0869 - Enable SATA Port Interlock Sw Enable SATA Port Interlock Sw. **/ UINT8 SataPortsInterlockSw[8]; -/** Offset 0x086D - Enable SATA Port External +/** Offset 0x0871 - Enable SATA Port External Enable SATA Port External. **/ UINT8 SataPortsExternal[8]; -/** Offset 0x0875 - Enable SATA Port SpinUp +/** Offset 0x0879 - Enable SATA Port SpinUp Enable the COMRESET initialization Sequence to the device. **/ UINT8 SataPortsSpinUp[8]; -/** Offset 0x087D - Enable SATA Port Solid State Drive +/** Offset 0x0881 - Enable SATA Port Solid State Drive 0: HDD; 1: SSD. **/ UINT8 SataPortsSolidStateDrive[8]; -/** Offset 0x0885 - Enable SATA Port Enable Dito Config +/** Offset 0x0889 - Enable SATA Port Enable Dito Config Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). **/ UINT8 SataPortsEnableDitoConfig[8]; -/** Offset 0x088D - Enable SATA Port DmVal +/** Offset 0x0891 - Enable SATA Port DmVal DITO multiplier. Default is 15. **/ UINT8 SataPortsDmVal[8]; -/** Offset 0x0895 - Reserved +/** Offset 0x0899 - Reserved **/ UINT8 Reserved41; -/** Offset 0x0896 - Enable SATA Port DmVal +/** Offset 0x089A - Enable SATA Port DmVal DEVSLP Idle Timeout (DITO), Default is 625. **/ UINT16 SataPortsDitoVal[8]; -/** Offset 0x08A6 - Enable SATA Port ZpOdd +/** Offset 0x08AA - Enable SATA Port ZpOdd Support zero power ODD. **/ UINT8 SataPortsZpOdd[8]; -/** Offset 0x08AE - PCH Sata Rst Raid Alternate Id +/** Offset 0x08B2 - PCH Sata Rst Raid Alternate Id Enable RAID Alternate ID. $EN_DIS **/ UINT8 SataRstRaidDeviceId; -/** Offset 0x08AF - PCH Sata Rst Raid0 +/** Offset 0x08B3 - PCH Sata Rst Raid0 RAID0. $EN_DIS **/ UINT8 SataRstRaid0; -/** Offset 0x08B0 - PCH Sata Rst Raid1 +/** Offset 0x08B4 - PCH Sata Rst Raid1 RAID1. $EN_DIS **/ UINT8 SataRstRaid1; -/** Offset 0x08B1 - PCH Sata Rst Raid10 +/** Offset 0x08B5 - PCH Sata Rst Raid10 RAID10. $EN_DIS **/ UINT8 SataRstRaid10; -/** Offset 0x08B2 - PCH Sata Rst Raid5 +/** Offset 0x08B6 - PCH Sata Rst Raid5 RAID5. $EN_DIS **/ UINT8 SataRstRaid5; -/** Offset 0x08B3 - PCH Sata Rst Irrt +/** Offset 0x08B7 - PCH Sata Rst Irrt Intel Rapid Recovery Technology. $EN_DIS **/ UINT8 SataRstIrrt; -/** Offset 0x08B4 - PCH Sata Rst Orom Ui Banner +/** Offset 0x08B8 - PCH Sata Rst Orom Ui Banner OROM UI and BANNER. $EN_DIS **/ UINT8 SataRstOromUiBanner; -/** Offset 0x08B5 - PCH Sata Rst Orom Ui Delay +/** Offset 0x08B9 - PCH Sata Rst Orom Ui Delay 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). **/ UINT8 SataRstOromUiDelay; -/** Offset 0x08B6 - PCH Sata Rst Hdd Unlock +/** Offset 0x08BA - PCH Sata Rst Hdd Unlock Indicates that the HDD password unlock in the OS is enabled. $EN_DIS **/ UINT8 SataRstHddUnlock; -/** Offset 0x08B7 - PCH Sata Rst Led Locate +/** Offset 0x08BB - PCH Sata Rst Led Locate Indicates that the LED/SGPIO hardware is attached and ping to locate feature is enabled on the OS. $EN_DIS **/ UINT8 SataRstLedLocate; -/** Offset 0x08B8 - PCH Sata Rst Irrt Only +/** Offset 0x08BC - PCH Sata Rst Irrt Only Allow only IRRT drives to span internal and external ports. $EN_DIS **/ UINT8 SataRstIrrtOnly; -/** Offset 0x08B9 - PCH Sata Rst Smart Storage +/** Offset 0x08BD - PCH Sata Rst Smart Storage RST Smart Storage caching Bit. $EN_DIS **/ UINT8 SataRstSmartStorage; -/** Offset 0x08BA - PCH Sata Rst Pcie Storage Remap enable +/** Offset 0x08BE - PCH Sata Rst Pcie Storage Remap enable Enable Intel RST for PCIe Storage remapping. **/ UINT8 SataRstPcieEnable[3]; -/** Offset 0x08BD - PCH Sata Rst Pcie Storage Port +/** Offset 0x08C1 - PCH Sata Rst Pcie Storage Port Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). **/ UINT8 SataRstPcieStoragePort[3]; -/** Offset 0x08C0 - PCH Sata Rst Pcie Device Reset Delay +/** Offset 0x08C4 - PCH Sata Rst Pcie Device Reset Delay PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms **/ UINT8 SataRstPcieDeviceResetDelay[3]; -/** Offset 0x08C3 - UFS enable/disable +/** Offset 0x08C7 - UFS enable/disable PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms $EN_DIS **/ UINT8 UfsEnable[2]; -/** Offset 0x08C5 - Reserved +/** Offset 0x08C9 - Reserved **/ UINT8 Reserved42; -/** Offset 0x08C6 - Thermal Throttling Custimized T0Level Value +/** Offset 0x08CA - Thermal Throttling Custimized T0Level Value Custimized T0Level value. **/ UINT16 PchT0Level; -/** Offset 0x08C8 - Thermal Throttling Custimized T1Level Value +/** Offset 0x08CC - Thermal Throttling Custimized T1Level Value Custimized T1Level value. **/ UINT16 PchT1Level; -/** Offset 0x08CA - Thermal Throttling Custimized T2Level Value +/** Offset 0x08CE - Thermal Throttling Custimized T2Level Value Custimized T2Level value. **/ UINT16 PchT2Level; -/** Offset 0x08CC - Enable The Thermal Throttle +/** Offset 0x08D0 - Enable The Thermal Throttle Enable the thermal throttle function. $EN_DIS **/ UINT8 PchTTEnable; -/** Offset 0x08CD - PMSync State 13 +/** Offset 0x08D1 - PMSync State 13 When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force at least T2 state. $EN_DIS **/ UINT8 PchTTState13Enable; -/** Offset 0x08CE - Thermal Throttle Lock +/** Offset 0x08D2 - Thermal Throttle Lock Thermal Throttle Lock. $EN_DIS **/ UINT8 PchTTLock; -/** Offset 0x08CF - Thermal Throttling Suggested Setting +/** Offset 0x08D3 - Thermal Throttling Suggested Setting Thermal Throttling Suggested Setting. $EN_DIS **/ UINT8 TTSuggestedSetting; -/** Offset 0x08D0 - Enable PCH Cross Throttling +/** Offset 0x08D4 - Enable PCH Cross Throttling Enable/Disable PCH Cross Throttling $EN_DIS **/ UINT8 TTCrossThrottling; -/** Offset 0x08D1 - DMI Thermal Sensor Autonomous Width Enable +/** Offset 0x08D5 - DMI Thermal Sensor Autonomous Width Enable DMI Thermal Sensor Autonomous Width Enable. $EN_DIS **/ UINT8 PchDmiTsawEn; -/** Offset 0x08D2 - DMI Thermal Sensor Suggested Setting +/** Offset 0x08D6 - DMI Thermal Sensor Suggested Setting DMT thermal sensor suggested representative values. $EN_DIS **/ UINT8 DmiSuggestedSetting; -/** Offset 0x08D3 - Thermal Sensor 0 Target Width +/** Offset 0x08D7 - Thermal Sensor 0 Target Width Thermal Sensor 0 Target Width. 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 **/ UINT8 DmiTS0TW; -/** Offset 0x08D4 - Thermal Sensor 1 Target Width +/** Offset 0x08D8 - Thermal Sensor 1 Target Width Thermal Sensor 1 Target Width. 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 **/ UINT8 DmiTS1TW; -/** Offset 0x08D5 - Thermal Sensor 2 Target Width +/** Offset 0x08D9 - Thermal Sensor 2 Target Width Thermal Sensor 2 Target Width. 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 **/ UINT8 DmiTS2TW; -/** Offset 0x08D6 - Thermal Sensor 3 Target Width +/** Offset 0x08DA - Thermal Sensor 3 Target Width Thermal Sensor 3 Target Width. 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 **/ UINT8 DmiTS3TW; -/** Offset 0x08D7 - Port 0 T1 Multipler +/** Offset 0x08DB - Port 0 T1 Multipler Port 0 T1 Multipler. **/ UINT8 SataP0T1M; -/** Offset 0x08D8 - Port 0 T2 Multipler +/** Offset 0x08DC - Port 0 T2 Multipler Port 0 T2 Multipler. **/ UINT8 SataP0T2M; -/** Offset 0x08D9 - Port 0 T3 Multipler +/** Offset 0x08DD - Port 0 T3 Multipler Port 0 T3 Multipler. **/ UINT8 SataP0T3M; -/** Offset 0x08DA - Port 0 Tdispatch +/** Offset 0x08DE - Port 0 Tdispatch Port 0 Tdispatch. **/ UINT8 SataP0TDisp; -/** Offset 0x08DB - Port 1 T1 Multipler +/** Offset 0x08DF - Port 1 T1 Multipler Port 1 T1 Multipler. **/ UINT8 SataP1T1M; -/** Offset 0x08DC - Port 1 T2 Multipler +/** Offset 0x08E0 - Port 1 T2 Multipler Port 1 T2 Multipler. **/ UINT8 SataP1T2M; -/** Offset 0x08DD - Port 1 T3 Multipler +/** Offset 0x08E1 - Port 1 T3 Multipler Port 1 T3 Multipler. **/ UINT8 SataP1T3M; -/** Offset 0x08DE - Port 1 Tdispatch +/** Offset 0x08E2 - Port 1 Tdispatch Port 1 Tdispatch. **/ UINT8 SataP1TDisp; -/** Offset 0x08DF - Port 0 Tinactive +/** Offset 0x08E3 - Port 0 Tinactive Port 0 Tinactive. **/ UINT8 SataP0Tinact; -/** Offset 0x08E0 - Port 0 Alternate Fast Init Tdispatch +/** Offset 0x08E4 - Port 0 Alternate Fast Init Tdispatch Port 0 Alternate Fast Init Tdispatch. $EN_DIS **/ UINT8 SataP0TDispFinit; -/** Offset 0x08E1 - Port 1 Tinactive +/** Offset 0x08E5 - Port 1 Tinactive Port 1 Tinactive. **/ UINT8 SataP1Tinact; -/** Offset 0x08E2 - Port 1 Alternate Fast Init Tdispatch +/** Offset 0x08E6 - Port 1 Alternate Fast Init Tdispatch Port 1 Alternate Fast Init Tdispatch. $EN_DIS **/ UINT8 SataP1TDispFinit; -/** Offset 0x08E3 - Sata Thermal Throttling Suggested Setting +/** Offset 0x08E7 - Sata Thermal Throttling Suggested Setting Sata Thermal Throttling Suggested Setting. $EN_DIS **/ UINT8 SataThermalSuggestedSetting; -/** Offset 0x08E4 - Enable Memory Thermal Throttling +/** Offset 0x08E8 - Enable Memory Thermal Throttling Enable Memory Thermal Throttling. $EN_DIS **/ UINT8 PchMemoryThrottlingEnable; -/** Offset 0x08E5 - Memory Thermal Throttling +/** Offset 0x08E9 - Memory Thermal Throttling Enable Memory Thermal Throttling. **/ UINT8 PchMemoryPmsyncEnable[2]; -/** Offset 0x08E7 - Enable Memory Thermal Throttling +/** Offset 0x08EB - Enable Memory Thermal Throttling Enable Memory Thermal Throttling. **/ UINT8 PchMemoryC0TransmitEnable[2]; -/** Offset 0x08E9 - Enable Memory Thermal Throttling +/** Offset 0x08ED - Enable Memory Thermal Throttling Enable Memory Thermal Throttling. **/ UINT8 PchMemoryPinSelection[2]; -/** Offset 0x08EB - Reserved +/** Offset 0x08EF - Reserved **/ UINT8 Reserved43; -/** Offset 0x08EC - Thermal Device Temperature +/** Offset 0x08F0 - Thermal Device Temperature Decides the temperature. **/ UINT16 PchTemperatureHotLevel; -/** Offset 0x08EE - USB2 Port Over Current Pin +/** Offset 0x08F2 - USB2 Port Over Current Pin Describe the specific over current pin number of USB 2.0 Port N. **/ UINT8 Usb2OverCurrentPin[16]; -/** Offset 0x08FE - USB3 Port Over Current Pin +/** Offset 0x0902 - USB3 Port Over Current Pin Describe the specific over current pin number of USB 3.0 Port N. **/ UINT8 Usb3OverCurrentPin[10]; -/** Offset 0x0908 - Enable xHCI LTR override +/** Offset 0x090C - Enable xHCI LTR override Enables override of recommended LTR values for xHCI $EN_DIS **/ UINT8 PchUsbLtrOverrideEnable; -/** Offset 0x0909 - Reserved +/** Offset 0x090D - Reserved **/ UINT8 Reserved44[3]; -/** Offset 0x090C - xHCI High Idle Time LTR override +/** Offset 0x0910 - xHCI High Idle Time LTR override Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting **/ UINT32 PchUsbLtrHighIdleTimeOverride; -/** Offset 0x0910 - xHCI Medium Idle Time LTR override +/** Offset 0x0914 - xHCI Medium Idle Time LTR override Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting **/ UINT32 PchUsbLtrMediumIdleTimeOverride; -/** Offset 0x0914 - xHCI Low Idle Time LTR override +/** Offset 0x0918 - xHCI Low Idle Time LTR override Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting **/ UINT32 PchUsbLtrLowIdleTimeOverride; -/** Offset 0x0918 - Enable 8254 Static Clock Gating +/** Offset 0x091C - Enable 8254 Static Clock Gating Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support legacy OS using 8254 timer. Also enable this while S0ix is enabled. @@ -2137,7 +2137,7 @@ typedef struct { **/ UINT8 Enable8254ClockGating; -/** Offset 0x0919 - Enable 8254 Static Clock Gating On S3 +/** Offset 0x091D - Enable 8254 Static Clock Gating On S3 This is only applicable when Enable8254ClockGating is disabled. FSP will do the 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This avoids the SMI requirement for the programming. @@ -2145,19 +2145,19 @@ typedef struct { **/ UINT8 Enable8254ClockGatingOnS3; -/** Offset 0x091A - PCH Sata Rst Optane Memory +/** Offset 0x091E - PCH Sata Rst Optane Memory Optane Memory $EN_DIS **/ UINT8 SataRstOptaneMemory; -/** Offset 0x091B - PCH Sata Rst CPU Attached Storage +/** Offset 0x091F - PCH Sata Rst CPU Attached Storage CPU Attached Storage $EN_DIS **/ UINT8 SataRstCpuAttachedStorage; -/** Offset 0x091C - Enable TCO timer. +/** Offset 0x0920 - Enable TCO timer. When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer emulation must be enabled, and WDAT table must not be exposed to the OS. @@ -2165,106 +2165,107 @@ typedef struct { **/ UINT8 EnableTcoTimer; -/** Offset 0x091D - Hybrid Storage Detection and Configuration Mode +/** Offset 0x0921 - Hybrid Storage Detection and Configuration Mode Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration. Default is 0: Disabled 0: Disabled, 1: Dynamic Configuration **/ UINT8 HybridStorageMode; -/** Offset 0x091E - Reserved +/** Offset 0x0922 - Reserved **/ - UINT8 Reserved45[2]; + UINT8 Reserved45[6]; -/** Offset 0x0920 - BgpdtHash[4] +/** Offset 0x0928 - BgpdtHash[4] BgpdtHash values **/ UINT64 BgpdtHash[4]; -/** Offset 0x0940 - BiosGuardAttr +/** Offset 0x0948 - BiosGuardAttr BiosGuardAttr default values **/ UINT32 BiosGuardAttr; -/** Offset 0x0944 - Reserved +/** Offset 0x094C - Reserved **/ UINT8 Reserved46[4]; -/** Offset 0x0948 - BiosGuardModulePtr +/** Offset 0x0950 - BiosGuardModulePtr BiosGuardModulePtr default values **/ UINT64 BiosGuardModulePtr; -/** Offset 0x0950 - SendEcCmd +/** Offset 0x0958 - SendEcCmd SendEcCmd function pointer. \n @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode **/ UINT64 SendEcCmd; -/** Offset 0x0958 - EcCmdProvisionEav +/** Offset 0x0960 - EcCmdProvisionEav Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC **/ UINT8 EcCmdProvisionEav; -/** Offset 0x0959 - EcCmdLock +/** Offset 0x0961 - EcCmdLock EcCmdLock default values. Locks Ephemeral Authorization Value sent previously **/ UINT8 EcCmdLock; -/** Offset 0x095A - Reserved +/** Offset 0x0962 - Reserved **/ UINT8 Reserved47[6]; -/** Offset 0x0960 - SgxEpoch0 +/** Offset 0x0968 - SgxEpoch0 SgxEpoch0 default values **/ UINT64 SgxEpoch0; -/** Offset 0x0968 - SgxEpoch1 +/** Offset 0x0970 - SgxEpoch1 SgxEpoch1 default values **/ UINT64 SgxEpoch1; -/** Offset 0x0970 - SgxSinitNvsData +/** Offset 0x0978 - SgxSinitNvsData SgxSinitNvsData default values **/ UINT8 SgxSinitNvsData; -/** Offset 0x0971 - Si Config CSM Flag. - Platform specific common policies that used by several silicon components. CSM status flag. +/** Offset 0x0979 - Si Config CSM Flag. + <b>@deprecated</b> Platform specific common policies that used by several silicon + components. CSM status flag. $EN_DIS **/ UINT8 SiCsmFlag; -/** Offset 0x0972 - Reserved +/** Offset 0x097A - Reserved **/ UINT8 Reserved48[6]; -/** Offset 0x0978 - SVID SDID table Poniter. +/** Offset 0x0980 - SVID SDID table Poniter. The address of the table of SVID SDID to customize each SVID SDID entry. This is only valid when SkipSsidProgramming is FALSE. **/ UINT32 SiSsidTablePtr; -/** Offset 0x097C - Number of ssid table. +/** Offset 0x0984 - Number of ssid table. SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. This is only valid when SkipSsidProgramming is FALSE. **/ UINT16 SiNumberOfSsidTableEntry; -/** Offset 0x097E - USB2 Port Reset Message Enable +/** Offset 0x0986 - USB2 Port Reset Message Enable 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message **/ UINT8 PortResetMessageEnable[16]; -/** Offset 0x098E - SATA RST Interrupt Mode +/** Offset 0x0996 - SATA RST Interrupt Mode Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. 0:Msix, 1:Msi, 2:Legacy **/ UINT8 SataRstInterrupt; -/** Offset 0x098F - ME Unconfig on RTC clear +/** Offset 0x0997 - ME Unconfig on RTC clear 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. 2: Cmos is clear, status unkonwn. 3: Reserved 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos @@ -2272,7 +2273,7 @@ typedef struct { **/ UINT8 MeUnconfigOnRtcClear; -/** Offset 0x0990 - Enable PS_ON. +/** Offset 0x0998 - Enable PS_ON. PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power target that will be required by the California Energy Commission (CEC). When FALSE, PS_ON is to be disabled. @@ -2280,124 +2281,124 @@ typedef struct { **/ UINT8 PsOnEnable; -/** Offset 0x0991 - Pmc Cpu C10 Gate Pin Enable +/** Offset 0x0999 - Pmc Cpu C10 Gate Pin Enable Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO and VccSTG rails instead of SLP_S0# pin. $EN_DIS **/ UINT8 PmcCpuC10GatePinEnable; -/** Offset 0x0992 - Pch Dmi Aspm Ctrl +/** Offset 0x099A - Pch Dmi Aspm Ctrl ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b> 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto **/ UINT8 PchDmiAspmCtrl; -/** Offset 0x0993 - PchDmiCwbEnable +/** Offset 0x099B - PchDmiCwbEnable Central Write Buffer feature configurable and enabled by default $EN_DIS **/ UINT8 PchDmiCwbEnable; -/** Offset 0x0994 - OS IDLE Mode Enable +/** Offset 0x099C - OS IDLE Mode Enable Enable/Disable OS Idle Mode $EN_DIS **/ UINT8 PmcOsIdleEnable; -/** Offset 0x0995 - Reserved +/** Offset 0x099D - Reserved **/ UINT8 Reserved49[315]; -/** Offset 0x0AD0 - RpPtmBytes +/** Offset 0x0AD8 - RpPtmBytes **/ UINT8 RpPtmBytes[4]; -/** Offset 0x0AD4 - Reserved +/** Offset 0x0ADC - Reserved **/ UINT8 Reserved50[16]; -/** Offset 0x0AE4 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 +/** Offset 0x0AEC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each value in array can be between 0-1. One byte for each port. **/ UINT8 Usb3HsioTxRate3UniqTranEnable[10]; -/** Offset 0x0AEE - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 +/** Offset 0x0AF6 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default = 4Ch</b>. One byte for each port. **/ UINT8 Usb3HsioTxRate3UniqTran[10]; -/** Offset 0x0AF8 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 +/** Offset 0x0B00 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each value in array can be between 0-1. One byte for each port. **/ UINT8 Usb3HsioTxRate2UniqTranEnable[10]; -/** Offset 0x0B02 - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 +/** Offset 0x0B0A - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], <b>Default = 4Ch</b>. One byte for each port. **/ UINT8 Usb3HsioTxRate2UniqTran[10]; -/** Offset 0x0B0C - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 +/** Offset 0x0B14 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each value in array can be between 0-1. One byte for each port. **/ UINT8 Usb3HsioTxRate1UniqTranEnable[10]; -/** Offset 0x0B16 - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 +/** Offset 0x0B1E - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], <b>Default = 4Ch</b>. One byte for each port. **/ UINT8 Usb3HsioTxRate1UniqTran[10]; -/** Offset 0x0B20 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 +/** Offset 0x0B28 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each value in array can be between 0-1. One byte for each port. **/ UINT8 Usb3HsioTxRate0UniqTranEnable[10]; -/** Offset 0x0B2A - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 +/** Offset 0x0B32 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], <b>Default = 4Ch</b>. One byte for each port. **/ UINT8 Usb3HsioTxRate0UniqTran[10]; -/** Offset 0x0B34 - Skip PAM regsiter lock +/** Offset 0x0B3C - Skip PAM regsiter lock Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): PAM registers will be locked by RC $EN_DIS **/ UINT8 SkipPamLock; -/** Offset 0x0B35 - EDRAM Test Mode +/** Offset 0x0B3D - EDRAM Test Mode Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): PAM registers will be locked by RC 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode **/ UINT8 EdramTestMode; -/** Offset 0x0B36 - Enable/Disable IGFX RenderStandby +/** Offset 0x0B3E - Enable/Disable IGFX RenderStandby Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby $EN_DIS **/ UINT8 RenderStandby; -/** Offset 0x0B37 - Enable/Disable IGFX PmSupport +/** Offset 0x0B3F - Enable/Disable IGFX PmSupport Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport $EN_DIS **/ UINT8 PmSupport; -/** Offset 0x0B38 - Enable/Disable CdynmaxClamp +/** Offset 0x0B40 - Enable/Disable CdynmaxClamp Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp $EN_DIS **/ UINT8 CdynmaxClampEnable; -/** Offset 0x0B39 - GT Frequency Limit +/** Offset 0x0B41 - GT Frequency Limit 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, @@ -2411,105 +2412,105 @@ typedef struct { **/ UINT8 GtFreqMax; -/** Offset 0x0B3A - Disable Turbo GT +/** Offset 0x0B42 - Disable Turbo GT 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency $EN_DIS **/ UINT8 DisableTurboGt; -/** Offset 0x0B3B - Enable/Disable CdClock Init +/** Offset 0x0B43 - Enable/Disable CdClock Init Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full CD clock if not initialized by Gfx PEIM $EN_DIS **/ UINT8 SkipCdClockInit; -/** Offset 0x0B3C - Reserved +/** Offset 0x0B44 - Reserved **/ UINT8 Reserved51[16]; -/** Offset 0x0B4C - 1-Core Ratio Limit +/** Offset 0x0B54 - 1-Core Ratio Limit 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83 **/ UINT8 OneCoreRatioLimit; -/** Offset 0x0B4D - 2-Core Ratio Limit +/** Offset 0x0B55 - 2-Core Ratio Limit 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 83 **/ UINT8 TwoCoreRatioLimit; -/** Offset 0x0B4E - 3-Core Ratio Limit +/** Offset 0x0B56 - 3-Core Ratio Limit 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 83 **/ UINT8 ThreeCoreRatioLimit; -/** Offset 0x0B4F - 4-Core Ratio Limit +/** Offset 0x0B57 - 4-Core Ratio Limit 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 83 **/ UINT8 FourCoreRatioLimit; -/** Offset 0x0B50 - Enable or Disable HWP +/** Offset 0x0B58 - Enable or Disable HWP Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b> 2-3:Reserved $EN_DIS **/ UINT8 Hwp; -/** Offset 0x0B51 - Hardware Duty Cycle Control +/** Offset 0x0B59 - Hardware Duty Cycle Control Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved $EN_DIS **/ UINT8 HdcControl; -/** Offset 0x0B52 - Package Long duration turbo mode time +/** Offset 0x0B5A - Package Long duration turbo mode time Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 **/ UINT8 PowerLimit1Time; -/** Offset 0x0B53 - Short Duration Turbo Mode +/** Offset 0x0B5B - Short Duration Turbo Mode Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 PowerLimit2; -/** Offset 0x0B54 - Turbo settings Lock +/** Offset 0x0B5C - Turbo settings Lock Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable $EN_DIS **/ UINT8 TurboPowerLimitLock; -/** Offset 0x0B55 - Package PL3 time window +/** Offset 0x0B5D - Package PL3 time window Package PL3 time window range for this policy from 0 to 64ms **/ UINT8 PowerLimit3Time; -/** Offset 0x0B56 - Package PL3 Duty Cycle +/** Offset 0x0B5E - Package PL3 Duty Cycle Package PL3 Duty Cycle; Valid Range is 0 to 100 **/ UINT8 PowerLimit3DutyCycle; -/** Offset 0x0B57 - Package PL3 Lock +/** Offset 0x0B5F - Package PL3 Lock Package PL3 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable $EN_DIS **/ UINT8 PowerLimit3Lock; -/** Offset 0x0B58 - Package PL4 Lock +/** Offset 0x0B60 - Package PL4 Lock Package PL4 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable $EN_DIS **/ UINT8 PowerLimit4Lock; -/** Offset 0x0B59 - TCC Activation Offset +/** Offset 0x0B61 - TCC Activation Offset TCC Activation Offset. Offset from factory set TCC activation temperature at which the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation Temperature, in volts.For SKL Y SKU, the recommended default for this policy is @@ -2517,7 +2518,7 @@ typedef struct { **/ UINT8 TccActivationOffset; -/** Offset 0x0B5A - Tcc Offset Clamp Enable/Disable +/** Offset 0x0B62 - Tcc Offset Clamp Enable/Disable Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle below P1.For SKL Y SKU, the recommended default for this policy is <b>1: Enabled</b>, For all other SKUs the recommended default are <b>0: Disabled</b>. @@ -2525,317 +2526,317 @@ typedef struct { **/ UINT8 TccOffsetClamp; -/** Offset 0x0B5B - Tcc Offset Lock +/** Offset 0x0B63 - Tcc Offset Lock Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature target; <b>0: Disabled</b>; 1: Enabled. $EN_DIS **/ UINT8 TccOffsetLock; -/** Offset 0x0B5C - Custom Ratio State Entries +/** Offset 0x0B64 - Custom Ratio State Entries The number of custom ratio state entries, ranges from 0 to 40 for a valid custom ratio table.Sets the number of custom P-states. At least 2 states must be present **/ UINT8 NumberOfEntries; -/** Offset 0x0B5D - Custom Short term Power Limit time window +/** Offset 0x0B65 - Custom Short term Power Limit time window Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 **/ UINT8 Custom1PowerLimit1Time; -/** Offset 0x0B5E - Custom Turbo Activation Ratio +/** Offset 0x0B66 - Custom Turbo Activation Ratio Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 **/ UINT8 Custom1TurboActivationRatio; -/** Offset 0x0B5F - Custom Config Tdp Control +/** Offset 0x0B67 - Custom Config Tdp Control Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 **/ UINT8 Custom1ConfigTdpControl; -/** Offset 0x0B60 - Custom Short term Power Limit time window +/** Offset 0x0B68 - Custom Short term Power Limit time window Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 **/ UINT8 Custom2PowerLimit1Time; -/** Offset 0x0B61 - Custom Turbo Activation Ratio +/** Offset 0x0B69 - Custom Turbo Activation Ratio Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 **/ UINT8 Custom2TurboActivationRatio; -/** Offset 0x0B62 - Custom Config Tdp Control +/** Offset 0x0B6A - Custom Config Tdp Control Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 **/ UINT8 Custom2ConfigTdpControl; -/** Offset 0x0B63 - Custom Short term Power Limit time window +/** Offset 0x0B6B - Custom Short term Power Limit time window Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 **/ UINT8 Custom3PowerLimit1Time; -/** Offset 0x0B64 - Custom Turbo Activation Ratio +/** Offset 0x0B6C - Custom Turbo Activation Ratio Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 **/ UINT8 Custom3TurboActivationRatio; -/** Offset 0x0B65 - Custom Config Tdp Control +/** Offset 0x0B6D - Custom Config Tdp Control Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 **/ UINT8 Custom3ConfigTdpControl; -/** Offset 0x0B66 - ConfigTdp mode settings Lock +/** Offset 0x0B6E - ConfigTdp mode settings Lock Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable $EN_DIS **/ UINT8 ConfigTdpLock; -/** Offset 0x0B67 - Load Configurable TDP SSDT +/** Offset 0x0B6F - Load Configurable TDP SSDT Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 ConfigTdpBios; -/** Offset 0x0B68 - PL1 Enable value +/** Offset 0x0B70 - PL1 Enable value PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 PsysPowerLimit1; -/** Offset 0x0B69 - PL1 timewindow +/** Offset 0x0B71 - PL1 timewindow PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 **/ UINT8 PsysPowerLimit1Time; -/** Offset 0x0B6A - PL2 Enable Value +/** Offset 0x0B72 - PL2 Enable Value PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 PsysPowerLimit2; -/** Offset 0x0B6B - Enable or Disable MLC Streamer Prefetcher +/** Offset 0x0B73 - Enable or Disable MLC Streamer Prefetcher Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. $EN_DIS **/ UINT8 MlcStreamerPrefetcher; -/** Offset 0x0B6C - Enable or Disable MLC Spatial Prefetcher +/** Offset 0x0B74 - Enable or Disable MLC Spatial Prefetcher Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 MlcSpatialPrefetcher; -/** Offset 0x0B6D - Enable or Disable Monitor /MWAIT instructions +/** Offset 0x0B75 - Enable or Disable Monitor /MWAIT instructions Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>. $EN_DIS **/ UINT8 MonitorMwaitEnable; -/** Offset 0x0B6E - Enable or Disable initialization of machine check registers +/** Offset 0x0B76 - Enable or Disable initialization of machine check registers Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. $EN_DIS **/ UINT8 MachineCheckEnable; -/** Offset 0x0B6F - AP Idle Manner of waiting for SIPI +/** Offset 0x0B77 - AP Idle Manner of waiting for SIPI AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop. 1: HALT loop, 2: MWAIT loop, 3: RUN loop **/ UINT8 ApIdleManner; -/** Offset 0x0B70 - Control on Processor Trace output scheme +/** Offset 0x0B78 - Control on Processor Trace output scheme Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. 0: Single Range Output, 1: ToPA Output **/ UINT8 ProcessorTraceOutputScheme; -/** Offset 0x0B71 - Enable or Disable Processor Trace feature +/** Offset 0x0B79 - Enable or Disable Processor Trace feature Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 ProcessorTraceEnable; -/** Offset 0x0B72 - Enable or Disable Intel SpeedStep Technology +/** Offset 0x0B7A - Enable or Disable Intel SpeedStep Technology Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 Eist; -/** Offset 0x0B73 - Enable or Disable Energy Efficient P-state +/** Offset 0x0B7B - Enable or Disable Energy Efficient P-state Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 EnergyEfficientPState; -/** Offset 0x0B74 - Enable or Disable Energy Efficient Turbo +/** Offset 0x0B7C - Enable or Disable Energy Efficient Turbo Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 EnergyEfficientTurbo; -/** Offset 0x0B75 - Enable or Disable T states +/** Offset 0x0B7D - Enable or Disable T states Enable or Disable T states; <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 TStates; -/** Offset 0x0B76 - Enable or Disable Bi-Directional PROCHOT# +/** Offset 0x0B7E - Enable or Disable Bi-Directional PROCHOT# Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 BiProcHot; -/** Offset 0x0B77 - Enable or Disable PROCHOT# signal being driven externally +/** Offset 0x0B7F - Enable or Disable PROCHOT# signal being driven externally Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>. $EN_DIS **/ UINT8 DisableProcHotOut; -/** Offset 0x0B78 - Enable or Disable PROCHOT# Response +/** Offset 0x0B80 - Enable or Disable PROCHOT# Response Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 ProcHotResponse; -/** Offset 0x0B79 - Enable or Disable VR Thermal Alert +/** Offset 0x0B81 - Enable or Disable VR Thermal Alert Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 DisableVrThermalAlert; -/** Offset 0x0B7A - Reserved +/** Offset 0x0B82 - Reserved **/ UINT8 Reserved52; -/** Offset 0x0B7B - Enable or Disable Thermal Monitor +/** Offset 0x0B83 - Enable or Disable Thermal Monitor Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 ThermalMonitor; -/** Offset 0x0B7C - Enable or Disable CPU power states (C-states) +/** Offset 0x0B84 - Enable or Disable CPU power states (C-states) Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 Cx; -/** Offset 0x0B7D - Configure C-State Configuration Lock +/** Offset 0x0B85 - Configure C-State Configuration Lock Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>. $EN_DIS **/ UINT8 PmgCstCfgCtrlLock; -/** Offset 0x0B7E - Enable or Disable Enhanced C-states +/** Offset 0x0B86 - Enable or Disable Enhanced C-states Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 C1e; -/** Offset 0x0B7F - Enable or Disable Package Cstate Demotion +/** Offset 0x0B87 - Enable or Disable Package Cstate Demotion Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 PkgCStateDemotion; -/** Offset 0x0B80 - Enable or Disable Package Cstate UnDemotion +/** Offset 0x0B88 - Enable or Disable Package Cstate UnDemotion Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 PkgCStateUnDemotion; -/** Offset 0x0B81 - Enable or Disable CState-Pre wake +/** Offset 0x0B89 - Enable or Disable CState-Pre wake Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 CStatePreWake; -/** Offset 0x0B82 - Enable or Disable TimedMwait Support. +/** Offset 0x0B8A - Enable or Disable TimedMwait Support. Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable $EN_DIS **/ UINT8 TimedMwait; -/** Offset 0x0B83 - Enable or Disable IO to MWAIT redirection +/** Offset 0x0B8B - Enable or Disable IO to MWAIT redirection Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 CstCfgCtrIoMwaitRedirection; -/** Offset 0x0B84 - Set the Max Pkg Cstate +/** Offset 0x0B8C - Set the Max Pkg Cstate Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto **/ UINT8 PkgCStateLimit; -/** Offset 0x0B85 - TimeUnit for C-State Latency Control0 +/** Offset 0x0B8D - TimeUnit for C-State Latency Control0 TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns **/ UINT8 CstateLatencyControl0TimeUnit; -/** Offset 0x0B86 - TimeUnit for C-State Latency Control1 +/** Offset 0x0B8E - TimeUnit for C-State Latency Control1 TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns **/ UINT8 CstateLatencyControl1TimeUnit; -/** Offset 0x0B87 - TimeUnit for C-State Latency Control2 +/** Offset 0x0B8F - TimeUnit for C-State Latency Control2 TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns **/ UINT8 CstateLatencyControl2TimeUnit; -/** Offset 0x0B88 - TimeUnit for C-State Latency Control3 +/** Offset 0x0B90 - TimeUnit for C-State Latency Control3 TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns **/ UINT8 CstateLatencyControl3TimeUnit; -/** Offset 0x0B89 - TimeUnit for C-State Latency Control4 +/** Offset 0x0B91 - TimeUnit for C-State Latency Control4 Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns **/ UINT8 CstateLatencyControl4TimeUnit; -/** Offset 0x0B8A - TimeUnit for C-State Latency Control5 +/** Offset 0x0B92 - TimeUnit for C-State Latency Control5 TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns **/ UINT8 CstateLatencyControl5TimeUnit; -/** Offset 0x0B8B - Interrupt Redirection Mode Select +/** Offset 0x0B93 - Interrupt Redirection Mode Select Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: No change. **/ UINT8 PpmIrmSetting; -/** Offset 0x0B8C - Lock prochot configuration +/** Offset 0x0B94 - Lock prochot configuration Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable $EN_DIS **/ UINT8 ProcHotLock; -/** Offset 0x0B8D - Configuration for boot TDP selection +/** Offset 0x0B95 - Configuration for boot TDP selection Deprecated. Move to premem. **/ UINT8 ConfigTdpLevel; -/** Offset 0x0B8E - Max P-State Ratio +/** Offset 0x0B96 - Max P-State Ratio Max P-State Ratio, Valid Range 0 to 0x7F **/ UINT8 MaxRatio; -/** Offset 0x0B8F - P-state ratios for custom P-state table +/** Offset 0x0B97 - P-state ratios for custom P-state table P-state ratios for custom P-state table. NumberOfEntries has valid range between 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] are configurable. Valid Range of each entry is 0 to 0x7F **/ UINT8 StateRatio[40]; -/** Offset 0x0BB7 - P-state ratios for max 16 version of custom P-state table +/** Offset 0x0BBF - P-state ratios for max 16 version of custom P-state table P-state ratios for max 16 version of custom P-state table. This table is used for OS versions limited to a max of 16 P-States. If the first entry of this table is 0, or if Number of Entries is 16 or less, then this table will be ignored, and @@ -2844,125 +2845,125 @@ typedef struct { **/ UINT8 StateRatioMax16[16]; -/** Offset 0x0BC7 - Reserved +/** Offset 0x0BCF - Reserved **/ UINT8 Reserved53; -/** Offset 0x0BC8 - Platform Power Pmax +/** Offset 0x0BD0 - Platform Power Pmax PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. Range 0-1024 Watts. Value of 800 = 100W **/ UINT16 PsysPmax; -/** Offset 0x0BCA - Interrupt Response Time Limit of C-State LatencyContol1 +/** Offset 0x0BD2 - Interrupt Response Time Limit of C-State LatencyContol1 Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF. 0 is Auto. **/ UINT16 CstateLatencyControl1Irtl; -/** Offset 0x0BCC - Interrupt Response Time Limit of C-State LatencyContol2 +/** Offset 0x0BD4 - Interrupt Response Time Limit of C-State LatencyContol2 Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF. 0 is Auto. **/ UINT16 CstateLatencyControl2Irtl; -/** Offset 0x0BCE - Interrupt Response Time Limit of C-State LatencyContol3 +/** Offset 0x0BD6 - Interrupt Response Time Limit of C-State LatencyContol3 Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF. 0 is Auto. **/ UINT16 CstateLatencyControl3Irtl; -/** Offset 0x0BD0 - Interrupt Response Time Limit of C-State LatencyContol4 +/** Offset 0x0BD8 - Interrupt Response Time Limit of C-State LatencyContol4 Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF. 0 is Auto. **/ UINT16 CstateLatencyControl4Irtl; -/** Offset 0x0BD2 - Interrupt Response Time Limit of C-State LatencyContol5 +/** Offset 0x0BDA - Interrupt Response Time Limit of C-State LatencyContol5 Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF. 0 is Auto. **/ UINT16 CstateLatencyControl5Irtl; -/** Offset 0x0BD4 - Package Long duration turbo mode power limit +/** Offset 0x0BDC - Package Long duration turbo mode power limit Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 PowerLimit1; -/** Offset 0x0BD8 - Package Short duration turbo mode power limit +/** Offset 0x0BE0 - Package Short duration turbo mode power limit Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 PowerLimit2Power; -/** Offset 0x0BDC - Package PL3 power limit +/** Offset 0x0BE4 - Package PL3 power limit Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 PowerLimit3; -/** Offset 0x0BE0 - Package PL4 power limit +/** Offset 0x0BE8 - Package PL4 power limit Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 PowerLimit4; -/** Offset 0x0BE4 - Tcc Offset Time Window for RATL +/** Offset 0x0BEC - Tcc Offset Time Window for RATL Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 TccOffsetTimeWindowForRatl; -/** Offset 0x0BE8 - Short term Power Limit value for custom cTDP level 1 +/** Offset 0x0BF0 - Short term Power Limit value for custom cTDP level 1 Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 Custom1PowerLimit1; -/** Offset 0x0BEC - Long term Power Limit value for custom cTDP level 1 +/** Offset 0x0BF4 - Long term Power Limit value for custom cTDP level 1 Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 Custom1PowerLimit2; -/** Offset 0x0BF0 - Short term Power Limit value for custom cTDP level 2 +/** Offset 0x0BF8 - Short term Power Limit value for custom cTDP level 2 Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 Custom2PowerLimit1; -/** Offset 0x0BF4 - Long term Power Limit value for custom cTDP level 2 +/** Offset 0x0BFC - Long term Power Limit value for custom cTDP level 2 Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 Custom2PowerLimit2; -/** Offset 0x0BF8 - Short term Power Limit value for custom cTDP level 3 +/** Offset 0x0C00 - Short term Power Limit value for custom cTDP level 3 Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 Custom3PowerLimit1; -/** Offset 0x0BFC - Long term Power Limit value for custom cTDP level 3 +/** Offset 0x0C04 - Long term Power Limit value for custom cTDP level 3 Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 Custom3PowerLimit2; -/** Offset 0x0C00 - Platform PL1 power +/** Offset 0x0C08 - Platform PL1 power Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 PsysPowerLimit1Power; -/** Offset 0x0C04 - Platform PL2 power +/** Offset 0x0C0C - Platform PL2 power Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 **/ UINT32 PsysPowerLimit2Power; -/** Offset 0x0C08 - Race To Halt +/** Offset 0x0C10 - Race To Halt Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency in order to enter pkg C-State faster to reduce overall power. (RTH is controlled through MSR 1FC bit 20)Disable; <b>1: Enable</b> @@ -2970,20 +2971,20 @@ typedef struct { **/ UINT8 RaceToHalt; -/** Offset 0x0C09 - Set Three Strike Counter Disable +/** Offset 0x0C11 - Set Three Strike Counter Disable False (default): Three Strike counter will be incremented and True: Prevents Three Strike counter from incrementing; <b>0: False</b>; 1: True. 0: False, 1: True **/ UINT8 ThreeStrikeCounterDisable; -/** Offset 0x0C0A - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT +/** Offset 0x0C12 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 HwpInterruptControl; -/** Offset 0x0C0B - 5-Core Ratio Limit +/** Offset 0x0C13 - 5-Core Ratio Limit 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 83 @@ -2991,7 +2992,7 @@ typedef struct { **/ UINT8 FiveCoreRatioLimit; -/** Offset 0x0C0C - 6-Core Ratio Limit +/** Offset 0x0C14 - 6-Core Ratio Limit 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 83 @@ -2999,7 +3000,7 @@ typedef struct { **/ UINT8 SixCoreRatioLimit; -/** Offset 0x0C0D - 7-Core Ratio Limit +/** Offset 0x0C15 - 7-Core Ratio Limit 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 83 @@ -3007,7 +3008,7 @@ typedef struct { **/ UINT8 SevenCoreRatioLimit; -/** Offset 0x0C0E - 8-Core Ratio Limit +/** Offset 0x0C16 - 8-Core Ratio Limit 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 83 @@ -3015,217 +3016,217 @@ typedef struct { **/ UINT8 EightCoreRatioLimit; -/** Offset 0x0C0F - Intel Turbo Boost Max Technology 3.0 +/** Offset 0x0C17 - Intel Turbo Boost Max Technology 3.0 Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b> $EN_DIS **/ UINT8 EnableItbm; -/** Offset 0x0C10 - Intel Turbo Boost Max Technology 3.0 Driver +/** Offset 0x0C18 - Intel Turbo Boost Max Technology 3.0 Driver @Deprecated: Intel Turbo Boost Max Technology 3.0 Driver doesn't support for TGL $EN_DIS **/ UINT8 EnableItbmDriver; -/** Offset 0x0C11 - Enable or Disable C1 Cstate Demotion +/** Offset 0x0C19 - Enable or Disable C1 Cstate Demotion Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 C1StateAutoDemotion; -/** Offset 0x0C12 - Enable or Disable C1 Cstate UnDemotion +/** Offset 0x0C1A - Enable or Disable C1 Cstate UnDemotion Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 C1StateUnDemotion; -/** Offset 0x0C13 - Minimum Ring ratio limit override +/** Offset 0x0C1B - Minimum Ring ratio limit override Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo ratio limit **/ UINT8 MinRingRatioLimit; -/** Offset 0x0C14 - Maximum Ring ratio limit override +/** Offset 0x0C1C - Maximum Ring ratio limit override Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo ratio limit **/ UINT8 MaxRingRatioLimit; -/** Offset 0x0C15 - Enable or Disable Per Core P State OS control +/** Offset 0x0C1D - Enable or Disable Per Core P State OS control Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 EnablePerCorePState; -/** Offset 0x0C16 - Enable or Disable HwP Autonomous Per Core P State OS control +/** Offset 0x0C1E - Enable or Disable HwP Autonomous Per Core P State OS control Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 EnableHwpAutoPerCorePstate; -/** Offset 0x0C17 - Enable or Disable HwP Autonomous EPP Grouping +/** Offset 0x0C1F - Enable or Disable HwP Autonomous EPP Grouping Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b> $EN_DIS **/ UINT8 EnableHwpAutoEppGrouping; -/** Offset 0x0C18 - Enable or Disable EPB override over PECI +/** Offset 0x0C20 - Enable or Disable EPB override over PECI Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable $EN_DIS **/ UINT8 EnableEpbPeciOverride; -/** Offset 0x0C19 - Enable or Disable Fast MSR for IA32_HWP_REQUEST +/** Offset 0x0C21 - Enable or Disable Fast MSR for IA32_HWP_REQUEST Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable;<b> 1: Enable</b> $EN_DIS **/ UINT8 EnableFastMsrHwpReq; -/** Offset 0x0C1A - Reserved +/** Offset 0x0C22 - Reserved **/ UINT8 Reserved54[17]; -/** Offset 0x0C2B - SgxSinitDataFromTpm +/** Offset 0x0C33 - SgxSinitDataFromTpm SgxSinitDataFromTpm default values **/ UINT8 SgxSinitDataFromTpm; -/** Offset 0x0C2C - Reserved +/** Offset 0x0C34 - Reserved **/ UINT8 Reserved55[16]; -/** Offset 0x0C3C - End of Post message +/** Offset 0x0C44 - End of Post message Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved **/ UINT8 EndOfPostMessage; -/** Offset 0x0C3D - D0I3 Setting for HECI Disable +/** Offset 0x0C45 - D0I3 Setting for HECI Disable Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all HECI devices $EN_DIS **/ UINT8 DisableD0I3SettingForHeci; -/** Offset 0x0C3E - Enable LOCKDOWN SMI +/** Offset 0x0C46 - Enable LOCKDOWN SMI Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. $EN_DIS **/ UINT8 PchLockDownGlobalSmi; -/** Offset 0x0C3F - Enable LOCKDOWN BIOS Interface +/** Offset 0x0C47 - Enable LOCKDOWN BIOS Interface Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. $EN_DIS **/ UINT8 PchLockDownBiosInterface; -/** Offset 0x0C40 - Unlock all GPIO pads +/** Offset 0x0C48 - Unlock all GPIO pads Force all GPIO pads to be unlocked for debug purpose. $EN_DIS **/ UINT8 PchUnlockGpioPads; -/** Offset 0x0C41 - PCH Unlock SideBand access +/** Offset 0x0C49 - PCH Unlock SideBand access The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. $EN_DIS **/ UINT8 PchSbAccessUnlock; -/** Offset 0x0C42 - PCIE RP Ltr Max Snoop Latency +/** Offset 0x0C4A - PCIE RP Ltr Max Snoop Latency Latency Tolerance Reporting, Max Snoop Latency. **/ UINT16 PcieRpLtrMaxSnoopLatency[24]; -/** Offset 0x0C72 - PCIE RP Ltr Max No Snoop Latency +/** Offset 0x0C7A - PCIE RP Ltr Max No Snoop Latency Latency Tolerance Reporting, Max Non-Snoop Latency. **/ UINT16 PcieRpLtrMaxNoSnoopLatency[24]; -/** Offset 0x0CA2 - PCIE RP Snoop Latency Override Mode +/** Offset 0x0CAA - PCIE RP Snoop Latency Override Mode Latency Tolerance Reporting, Snoop Latency Override Mode. **/ UINT8 PcieRpSnoopLatencyOverrideMode[24]; -/** Offset 0x0CBA - PCIE RP Snoop Latency Override Multiplier +/** Offset 0x0CC2 - PCIE RP Snoop Latency Override Multiplier Latency Tolerance Reporting, Snoop Latency Override Multiplier. **/ UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; -/** Offset 0x0CD2 - PCIE RP Snoop Latency Override Value +/** Offset 0x0CDA - PCIE RP Snoop Latency Override Value Latency Tolerance Reporting, Snoop Latency Override Value. **/ UINT16 PcieRpSnoopLatencyOverrideValue[24]; -/** Offset 0x0D02 - PCIE RP Non Snoop Latency Override Mode +/** Offset 0x0D0A - PCIE RP Non Snoop Latency Override Mode Latency Tolerance Reporting, Non-Snoop Latency Override Mode. **/ UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; -/** Offset 0x0D1A - PCIE RP Non Snoop Latency Override Multiplier +/** Offset 0x0D22 - PCIE RP Non Snoop Latency Override Multiplier Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. **/ UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; -/** Offset 0x0D32 - PCIE RP Non Snoop Latency Override Value +/** Offset 0x0D3A - PCIE RP Non Snoop Latency Override Value Latency Tolerance Reporting, Non-Snoop Latency Override Value. **/ UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; -/** Offset 0x0D62 - PCIE RP Slot Power Limit Scale +/** Offset 0x0D6A - PCIE RP Slot Power Limit Scale Specifies scale used for slot power limit value. Leave as 0 to set to default. **/ UINT8 PcieRpSlotPowerLimitScale[24]; -/** Offset 0x0D7A - PCIE RP Slot Power Limit Value +/** Offset 0x0D82 - PCIE RP Slot Power Limit Value Specifies upper limit on power supplie by slot. Leave as 0 to set to default. **/ UINT16 PcieRpSlotPowerLimitValue[24]; -/** Offset 0x0DAA - PCIE RP Enable Port8xh Decode +/** Offset 0x0DB2 - PCIE RP Enable Port8xh Decode This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; 1: Enable. $EN_DIS **/ UINT8 PcieEnablePort8xhDecode; -/** Offset 0x0DAB - PCIE Port8xh Decode Port Index +/** Offset 0x0DB3 - PCIE Port8xh Decode Port Index The Index of PCIe Port that is selected for Port8xh Decode (0 Based). **/ UINT8 PchPciePort8xhDecodePortIndex; -/** Offset 0x0DAC - PCH Energy Reporting +/** Offset 0x0DB4 - PCH Energy Reporting Disable/Enable PCH to CPU energy report feature. $EN_DIS **/ UINT8 PchPmDisableEnergyReport; -/** Offset 0x0DAD - PCH Sata Test Mode +/** Offset 0x0DB5 - PCH Sata Test Mode Allow entrance to the PCH SATA test modes. $EN_DIS **/ UINT8 SataTestMode; -/** Offset 0x0DAE - PCH USB OverCurrent mapping lock enable +/** Offset 0x0DB6 - PCH USB OverCurrent mapping lock enable If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. $EN_DIS **/ UINT8 PchXhciOcLock; -/** Offset 0x0DAF - LpmStateEnableMask +/** Offset 0x0DB7 - LpmStateEnableMask **/ UINT8 LpmStateEnableMask; -/** Offset 0x0DB0 - Mctp Broadcast Cycle +/** Offset 0x0DB8 - Mctp Broadcast Cycle Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable. $EN_DIS **/ UINT8 MctpBroadcastCycle; -/** Offset 0x0DB1 - Reserved +/** Offset 0x0DB9 - Reserved **/ UINT8 Reserved56[231]; } FSP_S_CONFIG; @@ -3242,11 +3243,11 @@ typedef struct { **/ FSP_S_CONFIG FspsConfig; -/** Offset 0x0E98 +/** Offset 0x0EA0 **/ UINT8 UnusedUpdSpace35[6]; -/** Offset 0x0E9E +/** Offset 0x0EA6 **/ UINT16 UpdTerminator; } FSPS_UPD; |