diff options
Diffstat (limited to 'src/vendorcode')
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h | 137 | ||||
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h | 251 |
2 files changed, 308 insertions, 80 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h index b623ba0b65..962463e425 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h @@ -37,19 +37,19 @@ are permitted provided that the following conditions are met: #pragma pack(1) -
-#include <MemInfoHob.h>
-
-///
-/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
-///
-typedef struct {
- UINT8 Revision; ///< Chipset Init Info Revision
- UINT8 Rsvd[3]; ///< Reserved
- UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
- UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
-} CHIPSET_INIT_INFO;
-
+ +#include <MemInfoHob.h> + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + /** Fsp M Configuration **/ @@ -1464,11 +1464,96 @@ typedef struct { **/ UINT8 SerialIoUartDebugDataBits; -/** Offset 0x0457 - ReservedPchPreMem +/** Offset 0x0457 - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x0458 - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x0459 - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x045A - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHda; + +/** Offset 0x045B - Enable HD Audio DMIC0 Link + Deprecated. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkDmic0; + +/** Offset 0x045C - Enable HD Audio DMIC1 Link + Deprecated. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkDmic1; + +/** Offset 0x045D - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP0/I2S link. Muxed with HDA. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp0; + +/** Offset 0x045E - Enable HD Audio SSP1 Link + Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp1; + +/** Offset 0x045F - Enable HD Audio SSP2 Link + Enable/disable HD Audio SSP2/I2S link. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp2; + +/** Offset 0x0460 - Enable HD Audio SoundWire#1 Link + Enable/disable HD Audio SNDW1 link. Muxed with HDA. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw1; + +/** Offset 0x0461 - Enable HD Audio SoundWire#2 Link + Enable/disable HD Audio SNDW2 link. Muxed with SSP1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw2; + +/** Offset 0x0462 - Enable HD Audio SoundWire#3 Link + Enable/disable HD Audio SNDW3 link. Muxed with DMIC1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw3; + +/** Offset 0x0463 - Enable HD Audio SoundWire#4 Link + Enable/disable HD Audio SNDW4 link. Muxed with DMIC0. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw4; + +/** Offset 0x0464 - Soundwire Clock Buffer GPIO RCOMP Setting + 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance. + $EN_DIS +**/ + UINT8 PchHdaSndwBufferRcomp; + +/** Offset 0x0465 - ReservedPchPreMem Reserved for Pch Pre-Mem $EN_DIS **/ - UINT8 ReservedPchPreMem[16]; + UINT8 ReservedPchPreMem[2]; /** Offset 0x0467 - ISA Serial Base selection Select ISA Serial Base address. Default is 0x3F8. @@ -2284,7 +2369,7 @@ typedef struct { Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, Info & Verbose. 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load - Error Warnings and Info, 5:Load Error Warnings Info and Verbose + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose **/ UINT8 PcdSerialDebugLevel; @@ -2390,13 +2475,27 @@ typedef struct { **/ UINT8 Ddr4SkipRefreshEn; -/** Offset 0x0510 +/** Offset 0x0510 - SerialDebugMrcLevel + MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 SerialDebugMrcLevel; + +/** Offset 0x0511 - Enable HD Audio Sndw Link IO Control + deprecated +**/ + UINT8 PchHdaSndwLinkIoControlEnabled[4]; + +/** Offset 0x0515 **/ UINT8 UnusedUpdSpace8[2]; -/** Offset 0x0512 +/** Offset 0x0517 **/ - UINT8 ReservedFspmUpd[6]; + UINT8 ReservedFspmUpd[1]; } FSP_M_CONFIG; /** Fsp M Test Configuration diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h index 49da429b47..0df3063e5c 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h @@ -37,49 +37,49 @@ are permitted provided that the following conditions are met: #pragma pack(1) -
-///
-/// Azalia Header structure
-///
-typedef struct {
- UINT16 VendorId; ///< Codec Vendor ID
- UINT16 DeviceId; ///< Codec Device ID
- UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision.
- UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI.
- UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer.
- UINT32 Reserved; ///< Reserved for future use. Must be set to 0.
-} AZALIA_HEADER;
-
-///
-/// Audio Azalia Verb Table structure
-///
-typedef struct {
- AZALIA_HEADER Header; ///< AZALIA PCH header
- UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header
-} AUDIO_AZALIA_VERB_TABLE;
-
-///
-/// Refer to the definition of PCH_INT_PIN
-///
-typedef enum {
- SiPchNoInt, ///< No Interrupt Pin
- SiPchIntA,
- SiPchIntB,
- SiPchIntC,
- SiPchIntD
-} SI_PCH_INT_PIN;
-///
-/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device.
-///
-typedef struct {
- UINT8 Device; ///< Device number
- UINT8 Function; ///< Device function
- UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN)
- UINT8 Irq; ///< IRQ to be set for device.
-} SI_PCH_DEVICE_INTERRUPT_CONFIG;
-
-#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices
-
+ +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + /** Fsp S Configuration **/ @@ -1319,8 +1319,8 @@ typedef struct { UINT8 PmcModPhySusPgEnable; /** Offset 0x036F - SlpS0WithGbeSupport - Enable/Disable SLP_S0 with GBE Support. Default is 0 when paired with WHL V0 stepping - CPU and 1 for all other CPUs. 0: Disable, 1: Enable + Enable/Disable SLP_S0 with GBE Support. Default is 0 for PCH-LP, WHL V0 Stepping + CPU and 1 for PCH-H Series. 0: Disable, 1: Enable $EN_DIS **/ UINT8 SlpS0WithGbeSupport; @@ -2053,23 +2053,23 @@ typedef struct { UINT8 PchScsEmmcHs400TuningRequired; /** Offset 0x06A0 - Set HS400 Tuning Data Valid - Set if HS400 Tuning Data Valid. + Deprecated $EN_DIS **/ UINT8 PchScsEmmcHs400DllDataValid; /** Offset 0x06A1 - Rx Strobe Delay Control - Rx Strobe Delay Control - Rx Strobe Delay DLL 1 (HS400 Mode). + Deprecated **/ UINT8 PchScsEmmcHs400RxStrobeDll1; /** Offset 0x06A2 - Tx Data Delay Control - Tx Data Delay Control 1 - Tx Data Delay (HS400 Mode). + Deprecated **/ UINT8 PchScsEmmcHs400TxDataDll; /** Offset 0x06A3 - I/O Driver Strength - Deprecated. + Deprecated 0:33 Ohm, 1:40 Ohm, 2:50 Ohm **/ UINT8 PchScsEmmcHs400DriverStrength; @@ -2440,11 +2440,30 @@ typedef struct { **/ UINT8 ScsSdCardWpPinEnabled; -/** Offset 0x074F - ReservedPchPostMem +/** Offset 0x074F - Set SATA DEVSLP GPIO Reset Config + Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset, + 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte + for each port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlpResetConfig[8]; + +/** Offset 0x0757 - Flash Configuration Lock Down + Enable/disable flash lock down. If platform decides to skip this programming, it + must lock SPI flash register DLOCK, FLOCKDN, and WRSDIS before end of post. + $EN_DIS +**/ + UINT8 SpiFlashCfgLockDown; + +/** Offset 0x0758 - Enable HD Audio Sndw Link IO Control + 0:Disabled, 1:Enabled. Enables IO Control to Sndw link if it is Enabled +**/ + UINT8 PchHdaSndwLinkIoControlEnabled[4]; + +/** Offset 0x075C - ReservedPchPostMem Reserved for Pch Post-Mem $EN_DIS **/ - UINT8 ReservedPchPostMem[16]; + UINT8 ReservedPchPostMem[3]; /** Offset 0x075F **/ @@ -3326,11 +3345,51 @@ typedef struct { **/ UINT8 C3StateUnDemotion; -/** Offset 0x08BF - ReservedCpuPostMemTest +/** Offset 0x08BF - Ratio Limit Num Core 0 + Ratio Limit Num Core0: This register defines the active core ranges for each frequency point +**/ + UINT8 RatioLimitNumCore0; + +/** Offset 0x08C0 - Ratio Limit Num Core 1 + Ratio Limit Num Core1: This register defines the active core ranges for each frequency point +**/ + UINT8 RatioLimitNumCore1; + +/** Offset 0x08C1 - Ratio Limit Num Core 2 + Ratio Limit Num Core2: This register defines the active core ranges for each frequency point +**/ + UINT8 RatioLimitNumCore2; + +/** Offset 0x08C2 - Ratio Limit Core 3 + Ratio Limit Num Core3: This register defines the active core ranges for each frequency point +**/ + UINT8 RatioLimitNumCore3; + +/** Offset 0x08C3 - Ratio Limit Num Core 4 + Ratio Limit Num Core4: This register defines the active core ranges for each frequency point +**/ + UINT8 RatioLimitNumCore4; + +/** Offset 0x08C4 - Ratio Limit Num Core 5 + Ratio Limit Num Core5: This register defines the active core ranges for each frequency point +**/ + UINT8 RatioLimitNumCore5; + +/** Offset 0x08C5 - Ratio Limit Num Core 6 + Ratio Limit Num Core6: This register defines the active core ranges for each frequency point +**/ + UINT8 RatioLimitNumCore6; + +/** Offset 0x08C6 - Ratio Limit Num Core 7 + Ratio Limit Num Core7: This register defines the active core ranges for each frequency point +**/ + UINT8 RatioLimitNumCore7; + +/** Offset 0x08C7 - ReservedCpuPostMemTest Reserved for CPU Post-Mem Test $EN_DIS **/ - UINT8 ReservedCpuPostMemTest[19]; + UINT8 ReservedCpuPostMemTest[11]; /** Offset 0x08D2 - SgxSinitDataFromTpm SgxSinitDataFromTpm default values @@ -3338,8 +3397,7 @@ typedef struct { UINT8 SgxSinitDataFromTpm; /** Offset 0x08D3 - End of Post message - Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): - EOP send in PEI, Send in DXE(0x2)(Default): EOP send in PEI + Deprecated 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved **/ UINT8 EndOfPostMessage; @@ -3488,11 +3546,82 @@ typedef struct { **/ UINT8 MctpBroadcastCycle; -/** Offset 0x0A8A +/** Offset 0x0A8A - Use DLL values from policy + Set if FSP should use HS400 DLL values from policy + $EN_DIS +**/ + UINT8 EmmcUseCustomDlls; + +/** Offset 0x0A8B +**/ + UINT8 UnusedUpdSpace29; + +/** Offset 0x0A8C - Emmc Tx CMD Delay control register value + Please see Tx CMD Delay Control register definition for help +**/ + UINT32 EmmcTxCmdDelayRegValue; + +/** Offset 0x0A90 - Emmc Tx DATA Delay control 1 register value + Please see Tx DATA Delay control 1 register definition for help +**/ + UINT32 EmmcTxDataDelay1RegValue; + +/** Offset 0x0A94 - Emmc Tx DATA Delay control 2 register value + Please see Tx DATA Delay control 2 register definition for help +**/ + UINT32 EmmcTxDataDelay2RegValue; + +/** Offset 0x0A98 - Emmc Rx CMD + DATA Delay control 1 register value + Please see Rx CMD + DATA Delay control 1 register definition for help +**/ + UINT32 EmmcRxCmdDataDelay1RegValue; + +/** Offset 0x0A9C - Emmc Rx CMD + DATA Delay control 2 register value + Please see Rx CMD + DATA Delay control 2 register definition for help +**/ + UINT32 EmmcRxCmdDataDelay2RegValue; + +/** Offset 0x0AA0 - Emmc Rx Strobe Delay control register value + Please see Rx Strobe Delay control register definition for help +**/ + UINT32 EmmcRxStrobeDelayRegValue; + +/** Offset 0x0AA4 - Use tuned DLL values from policy + Set if FSP should use HS400 DLL values from policy + $EN_DIS +**/ + UINT8 SdCardUseCustomDlls; + +/** Offset 0x0AA5 +**/ + UINT8 UnusedUpdSpace30[3]; + +/** Offset 0x0AA8 - SdCard Tx CMD Delay control register value + Please see Tx CMD Delay Control register definition for help +**/ + UINT32 SdCardTxCmdDelayRegValue; + +/** Offset 0x0AAC - SdCard Tx DATA Delay control 1 register value + Please see Tx DATA Delay control 1 register definition for help +**/ + UINT32 SdCardTxDataDelay1RegValue; + +/** Offset 0x0AB0 - SdCard Tx DATA Delay control 2 register value + Please see Tx DATA Delay control 2 register definition for help +**/ + UINT32 SdCardTxDataDelay2RegValue; + +/** Offset 0x0AB4 - SdCard Rx CMD + DATA Delay control 1 register value + Please see Rx CMD + DATA Delay control 1 register definition for help +**/ + UINT32 SdCardRxCmdDataDelay1RegValue; + +/** Offset 0x0AB8 - SdCard Rx CMD + DATA Delay control 2 register value + Please see Rx CMD + DATA Delay control 2 register definition for help **/ - UINT8 UnusedUpdSpace29[2]; + UINT32 SdCardRxCmdDataDelay2RegValue; -/** Offset 0x0A8C +/** Offset 0x0ABC **/ UINT8 ReservedFspsTestUpd[12]; } FSP_S_TEST_CONFIG; @@ -3513,11 +3642,11 @@ typedef struct { **/ FSP_S_TEST_CONFIG FspsTestConfig; -/** Offset 0x0A98 +/** Offset 0x0AC8 **/ - UINT8 UnusedUpdSpace30[6]; + UINT8 UnusedUpdSpace31[6]; -/** Offset 0x0A9E +/** Offset 0x0ACE **/ UINT16 UpdTerminator; } FSPS_UPD; |