summaryrefslogtreecommitdiff
path: root/src/vendorcode
diff options
context:
space:
mode:
Diffstat (limited to 'src/vendorcode')
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FirmwareVersionInfoHob.h68
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspUpd.h48
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h637
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h656
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/FsptUpd.h186
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/jasperlake/MemInfoHob.h274
6 files changed, 1869 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FirmwareVersionInfoHob.h
new file mode 100644
index 0000000000..373c167186
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FirmwareVersionInfoHob.h
@@ -0,0 +1,68 @@
+/** @file
+ Header file for Firmware Version Information
+
+ @copyright
+ Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License which accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _FIRMWARE_VERSION_INFO_HOB_H_
+#define _FIRMWARE_VERSION_INFO_HOB_H_
+
+#include <Uefi/UefiMultiPhase.h>
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#pragma pack(1)
+///
+/// Firmware Version Structure
+///
+typedef struct {
+ UINT8 MajorVersion;
+ UINT8 MinorVersion;
+ UINT8 Revision;
+ UINT16 BuildNumber;
+} FIRMWARE_VERSION;
+
+///
+/// Firmware Version Information Structure
+///
+typedef struct {
+ UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name
+ UINT8 VersionStringIndex; ///< Offset 1 Index of Version String
+ FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version
+} FIRMWARE_VERSION_INFO;
+
+#ifndef __SMBIOS_STANDARD_H__
+///
+/// The Smbios structure header.
+///
+typedef struct {
+ UINT8 Type;
+ UINT8 Length;
+ UINT16 Handle;
+} SMBIOS_STRUCTURE;
+#endif
+
+///
+/// Firmware Version Information HOB Structure
+///
+typedef struct {
+ EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB
+ SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB
+ UINT8 Count; ///< Offset 28 Number of FVI elements included.
+///
+/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer
+///
+} FIRMWARE_VERSION_INFO_HOB;
+#pragma pack()
+
+#endif // _FIRMWARE_VERSION_INFO_HOB_H_
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspUpd.h
new file mode 100644
index 0000000000..b28ba78ea0
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspUpd.h
@@ -0,0 +1,48 @@
+/** @file
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPUPD_H__
+#define __FSPUPD_H__
+
+#include <FspEas.h>
+
+#pragma pack(1)
+
+#define FSPT_UPD_SIGNATURE 0x545F4450554C534A /* 'JSLUPD_T' */
+
+#define FSPM_UPD_SIGNATURE 0x4D5F4450554C534A /* 'JSLUPD_M' */
+
+#define FSPS_UPD_SIGNATURE 0x535F4450554C534A /* 'JSLUPD_S' */
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h
new file mode 100644
index 0000000000..cce959cb15
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h
@@ -0,0 +1,637 @@
+/** @file
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPMUPD_H__
+#define __FSPMUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+#include <MemInfoHob.h>
+
+///
+/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
+///
+typedef struct {
+ UINT8 Revision; ///< Chipset Init Info Revision
+ UINT8 Rsvd[3]; ///< Reserved
+ UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
+ UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
+} CHIPSET_INIT_INFO;
+
+
+/** Fsp M Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - Reserved
+**/
+ UINT8 Reserved0[8];
+
+/** Offset 0x0048 - SPD Data Length
+ Length of SPD Data
+ 0x100:256 Bytes, 0x200:512 Bytes
+**/
+ UINT16 MemorySpdDataLen;
+
+/** Offset 0x004A - Reserved
+**/
+ UINT8 Reserved1[2];
+
+/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr00;
+
+/** Offset 0x0050 - Reserved
+**/
+ UINT8 Reserved2[4];
+
+/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr10;
+
+/** Offset 0x0058 - Reserved
+**/
+ UINT8 Reserved3[4];
+
+/** Offset 0x005C - Dq Byte Map CH0
+ Dq byte mapping between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqByteMapCh0[12];
+
+/** Offset 0x0068 - Dq Byte Map CH1
+ Dq byte mapping between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqByteMapCh1[12];
+
+/** Offset 0x0074 - Dqs Map CPU to DRAM CH 0
+ Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqsMapCpu2DramCh0[8];
+
+/** Offset 0x007C - Dqs Map CPU to DRAM CH 1
+ Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqsMapCpu2DramCh1[8];
+
+/** Offset 0x0084 - RcompResister settings
+ Indicates RcompReister settings: Board-dependent
+**/
+ UINT16 RcompResistor[3];
+
+/** Offset 0x008A - RcompTarget settings
+ RcompTarget settings: board-dependent
+**/
+ UINT16 RcompTarget[5];
+
+/** Offset 0x0094 - Dqs Pins Interleaved Setting
+ Indicates DqPinsInterleaved setting: board-dependent
+ $EN_DIS
+**/
+ UINT8 DqPinsInterleaved;
+
+/** Offset 0x0095 - VREF_CA
+ CA Vref routing: board-dependent
+ 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B,
+ 2:VREF_CA to CH_A and VREF_DQ_B to CH_B
+**/
+ UINT8 CaVrefConfig;
+
+/** Offset 0x0096 - Reserved
+**/
+ UINT8 Reserved4[6];
+
+/** Offset 0x009C - Intel Enhanced Debug
+ Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied
+ 0 : Disable, 0x400000 : Enable
+**/
+ UINT32 IedSize;
+
+/** Offset 0x00A0 - Tseg Size
+ Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build
+ 0x0400000:4MB, 0x01000000:16MB
+**/
+ UINT32 TsegSize;
+
+/** Offset 0x00A4 - Reserved
+**/
+ UINT8 Reserved5[6];
+
+/** Offset 0x00AA - Enable SMBus
+ Enable/disable SMBus controller.
+ $EN_DIS
+**/
+ UINT8 SmbusEnable;
+
+/** Offset 0x00AB - Spd Address Tabl
+ Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used
+ if SPD Address is 00
+**/
+ UINT8 SpdAddressTable[4];
+
+/** Offset 0x00AF - Platform Debug Consent
+ To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type.
+ Enabling this BIOS option may alter the default value of other debug-related BIOS
+ options.\Manual: Do not use Platform Debug Consent to override other debug-relevant
+ policies, but the user must set each debug option manually, aimed at advanced users.\n
+ Note: DCI OOB (aka BSSB) uses CCA probe.
+ 0:Disabled, 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), 4:Enabled (XDP/MIPI60), 5:Enabled
+ (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual
+**/
+ UINT8 PlatformDebugConsent;
+
+/** Offset 0x00B0 - Reserved
+**/
+ UINT8 Reserved6[2];
+
+/** Offset 0x00B2 - Enable DCI ModPHY Pwoer Gate
+ Enable ModPHY Pwoer Gate when DCI is enabled
+ $EN_DIS
+**/
+ UINT8 DciModphyPg;
+
+/** Offset 0x00B3 - Reserved
+**/
+ UINT8 Reserved7;
+
+/** Offset 0x00B4 - PCH Trace Hub Mode
+ Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
+ if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
+ 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode
+**/
+ UINT8 PchTraceHubMode;
+
+/** Offset 0x00B5 - Reserved
+**/
+ UINT8 Reserved8[47];
+
+/** Offset 0x00E4 - Disable VT-d
+ 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
+ $EN_DIS
+**/
+ UINT8 VtdDisable;
+
+/** Offset 0x00E5 - Reserved
+**/
+ UINT8 Reserved9[3];
+
+/** Offset 0x00E8 - Internal Graphics Pre-allocated Memory
+ Size of memory preallocated for internal graphics.
+ 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB,
+ 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB,
+ 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB
+**/
+ UINT8 IgdDvmt50PreAlloc;
+
+/** Offset 0x00E9 - Internal Graphics
+ Enable/disable internal graphics.
+ $EN_DIS
+**/
+ UINT8 InternalGfx;
+
+/** Offset 0x00EA - Reserved
+**/
+ UINT8 Reserved10;
+
+/** Offset 0x00EB - Board Type
+ MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile
+ Halo, 7=UP Server
+ 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server
+**/
+ UINT8 UserBd;
+
+/** Offset 0x00EC - Reserved
+**/
+ UINT8 Reserved11[2];
+
+/** Offset 0x00EE - SA GV
+ System Agent dynamic frequency support and when enabled memory will be training
+ at three different frequencies.
+ 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled
+**/
+ UINT8 SaGv;
+
+/** Offset 0x00EF - Reserved
+**/
+ UINT8 Reserved12[5];
+
+/** Offset 0x00F4 - Rank Margin Tool
+ Enable/disable Rank Margin Tool.
+ $EN_DIS
+**/
+ UINT8 RMT;
+
+/** Offset 0x00F5 - Reserved
+**/
+ UINT8 Reserved13[24];
+
+/** Offset 0x010D - Memory Reference Clock
+ 100MHz, 133MHz.
+ 0:133MHz, 1:100MHz
+**/
+ UINT8 RefClk;
+
+/** Offset 0x010E - Reserved
+**/
+ UINT8 Reserved14[26];
+
+/** Offset 0x0128 - Enable Intel HD Audio (Azalia)
+ 0: Disable, 1: Enable (Default) Azalia controller
+ $EN_DIS
+**/
+ UINT8 PchHdaEnable;
+
+/** Offset 0x0129 - CPU Trace Hub Mode
+ Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
+ if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
+ 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode
+**/
+ UINT8 CpuTraceHubMode;
+
+/** Offset 0x012A - Reserved
+**/
+ UINT8 Reserved15[98];
+
+/** Offset 0x018C - Program GPIOs for LFP on DDI port-A device
+ 0=Disabled,1(Default)=eDP, 2=MIPI DSI
+ 0:Disabled, 1:eDP, 2:MIPI DSI
+**/
+ UINT8 DdiPortAConfig;
+
+/** Offset 0x018D - Reserved
+**/
+ UINT8 Reserved16[2];
+
+/** Offset 0x018F - Enable or disable HPD of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBHpd;
+
+/** Offset 0x0190 - Enable or disable HPD of DDI port C
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCHpd;
+
+/** Offset 0x0191 - Reserved
+**/
+ UINT8 Reserved17[5];
+
+/** Offset 0x0196 - Enable or disable DDC of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBDdc;
+
+/** Offset 0x0197 - Enable or disable DDC of DDI port C
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCDdc;
+
+/** Offset 0x0198 - Reserved
+**/
+ UINT8 Reserved18[165];
+
+/** Offset 0x023D - C6DRAM power gating feature
+ This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM
+ power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating
+ feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>.
+ $EN_DIS
+**/
+ UINT8 EnableC6Dram;
+
+/** Offset 0x023E - Reserved
+**/
+ UINT8 Reserved19[7];
+
+/** Offset 0x0245 - CPU ratio value
+ CPU ratio value. Valid Range 0 to 63
+**/
+ UINT8 CpuRatio;
+
+/** Offset 0x0246 - Reserved
+**/
+ UINT8 Reserved20[4];
+
+/** Offset 0x024A - Enable or Disable VMX
+ Enable or Disable VMX; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 VmxEnable;
+
+/** Offset 0x024B - Reserved
+**/
+ UINT8 Reserved21[31];
+
+/** Offset 0x026A - BiosGuard
+ Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 BiosGuard;
+
+/** Offset 0x026B - Reserved
+**/
+ UINT8 Reserved22[5];
+
+/** Offset 0x0270 - PrmrrSize
+ Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
+**/
+ UINT32 PrmrrSize;
+
+/** Offset 0x0274 - SinitMemorySize
+ Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable
+**/
+ UINT32 SinitMemorySize;
+
+/** Offset 0x0278 - Reserved
+**/
+ UINT8 Reserved23[543];
+
+/** Offset 0x0497 - Usage type for ClkSrc
+ 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
+ (free running), 0xFF: not used
+**/
+ UINT8 PcieClkSrcUsage[16];
+
+/** Offset 0x04A7 - ClkReq-to-ClkSrc mapping
+ Number of ClkReq signal assigned to ClkSrc
+**/
+ UINT8 PcieClkSrcClkReq[16];
+
+/** Offset 0x04B7 - Reserved
+**/
+ UINT8 Reserved24[5];
+
+/** Offset 0x04BC - Enable PCIE RP Mask
+ Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
+ for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpEnableMask;
+
+/** Offset 0x04C0 - Debug Interfaces
+ Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub,
+ BIT2 - Not used.
+**/
+ UINT8 PcdDebugInterfaceFlags;
+
+/** Offset 0x04C1 - Serial Io Uart Debug Controller Number
+ Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
+ Core interface, it cannot be used for debug purpose.
+ 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
+**/
+ UINT8 SerialIoUartDebugControllerNumber;
+
+/** Offset 0x04C2 - Reserved
+**/
+ UINT8 Reserved25[22];
+
+/** Offset 0x04D8 - Early Command Training
+ Enables/Disable Early Command Training
+ $EN_DIS
+**/
+ UINT8 ECT;
+
+/** Offset 0x04D9 - Reserved
+**/
+ UINT8 Reserved26[2];
+
+/** Offset 0x04DB - Read MPR Training
+ Enables/Disable Read MPR Training
+ $EN_DIS
+**/
+ UINT8 RDMPRT;
+
+/** Offset 0x04DC - Reserved
+**/
+ UINT8 Reserved27[7];
+
+/** Offset 0x04E3 - Dimm ODT Training
+ Enables/Disable Dimm ODT Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTT;
+
+/** Offset 0x04E4 - DIMM RON Training
+ Enables/Disable DIMM RON Training
+ $EN_DIS
+**/
+ UINT8 DIMMRONT;
+
+/** Offset 0x04E5 - Reserved
+**/
+ UINT8 Reserved28;
+
+/** Offset 0x04E6 - Write Slew Rate Training
+ Enables/Disable Write Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 WRSRT;
+
+/** Offset 0x04E7 - Read ODT Training
+ Enables/Disable Read ODT Training
+ $EN_DIS
+**/
+ UINT8 RDODTT;
+
+/** Offset 0x04E8 - Read Equalization Training
+ Enables/Disable Read Equalization Training
+ $EN_DIS
+**/
+ UINT8 RDEQT;
+
+/** Offset 0x04E9 - Read Amplifier Training
+ Enables/Disable Read Amplifier Training
+ $EN_DIS
+**/
+ UINT8 RDAPT;
+
+/** Offset 0x04EA - Reserved
+**/
+ UINT8 Reserved29[3];
+
+/** Offset 0x04ED - Read Voltage Centering 2D
+ Enables/Disable Read Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDVC2D;
+
+/** Offset 0x04EE - Reserved
+**/
+ UINT8 Reserved30[3];
+
+/** Offset 0x04F1 - Turn Around Timing Training
+ Enables/Disable Turn Around Timing Training
+ $EN_DIS
+**/
+ UINT8 TAT;
+
+/** Offset 0x04F2 - Reserved
+**/
+ UINT8 Reserved31[6];
+
+/** Offset 0x04F8 - Receive Enable Centering 1D
+ Enables/Disable Receive Enable Centering 1D
+ $EN_DIS
+**/
+ UINT8 RCVENC1D;
+
+/** Offset 0x04F9 - Retrain Margin Check
+ Enables/Disable Retrain Margin Check
+ $EN_DIS
+**/
+ UINT8 RMC;
+
+/** Offset 0x04FA - Reserved
+**/
+ UINT8 Reserved32[60];
+
+/** Offset 0x0536 - RAPL PL 1 WindowX
+ Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim1WindX;
+
+/** Offset 0x0537 - RAPL PL 1 WindowY
+ Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim1WindY;
+
+/** Offset 0x0538 - Reserved
+**/
+ UINT8 Reserved33[2];
+
+/** Offset 0x053A - RAPL PL 1 Power
+ range[0;2^14-1]= [2047.875;0]in W, (224= Def)
+**/
+ UINT16 RaplLim1Pwr;
+
+/** Offset 0x053C - Reserved
+**/
+ UINT8 Reserved34[68];
+
+/** Offset 0x0580 - LpDdrDqDqsReTraining
+ Enables/Disable LpDdrDqDqsReTraining
+ $EN_DIS
+**/
+ UINT8 LpDdrDqDqsReTraining;
+
+/** Offset 0x0581 - Reserved
+**/
+ UINT8 Reserved35[172];
+
+/** Offset 0x062D - Enable HD Audio Link
+ Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkHdaEnable;
+
+/** Offset 0x062E - Reserved
+**/
+ UINT8 Reserved36[3];
+
+/** Offset 0x0631 - Enable HD Audio DMIC_N Link
+ Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
+**/
+ UINT8 PchHdaAudioLinkDmicEnable[2];
+
+/** Offset 0x0633 - Reserved
+**/
+ UINT8 Reserved37[17];
+
+/** Offset 0x0644 - Enable HD Audio DSP
+ Enable/disable HD Audio DSP feature.
+ $EN_DIS
+**/
+ UINT8 PchHdaDspEnable;
+
+/** Offset 0x0645 - Reserved
+**/
+ UINT8 Reserved38[11];
+
+/** Offset 0x0650 - Enable HD Audio SSP0 Link
+ Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5
+**/
+ UINT8 PchHdaAudioLinkSspEnable[6];
+
+/** Offset 0x0656 - Enable HD Audio SoundWire#N Link
+ Enable/disable HD Audio SNDW#N link. Muxed with HDA.
+**/
+ UINT8 PchHdaAudioLinkSndwEnable[4];
+
+/** Offset 0x065A - Reserved
+**/
+ UINT8 Reserved39[7];
+
+/** Offset 0x0661 - Skip MBP HOB
+ Test, 0: disable, 1: enable, Enable/Disable MOB HOB.
+ $EN_DIS
+**/
+ UINT8 SkipMbpHob;
+
+/** Offset 0x0662 - Reserved
+**/
+ UINT8 Reserved40[22];
+} FSP_M_CONFIG;
+
+/** Fsp M UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSPM_ARCH_UPD FspmArchUpd;
+
+/** Offset 0x0040
+**/
+ FSP_M_CONFIG FspmConfig;
+
+/** Offset 0x0678
+**/
+ UINT8 UnusedUpdSpace19[6];
+
+/** Offset 0x067E
+**/
+ UINT16 UpdTerminator;
+} FSPM_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h
new file mode 100644
index 0000000000..d01ae6ab46
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h
@@ -0,0 +1,656 @@
+/** @file
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPSUPD_H__
+#define __FSPSUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+///
+/// Azalia Header structure
+///
+typedef struct {
+ UINT16 VendorId; ///< Codec Vendor ID
+ UINT16 DeviceId; ///< Codec Device ID
+ UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision.
+ UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI.
+ UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer.
+ UINT32 Reserved; ///< Reserved for future use. Must be set to 0.
+} AZALIA_HEADER;
+
+///
+/// Audio Azalia Verb Table structure
+///
+typedef struct {
+ AZALIA_HEADER Header; ///< AZALIA PCH header
+ UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header
+} AUDIO_AZALIA_VERB_TABLE;
+
+///
+/// Refer to the definition of PCH_INT_PIN
+///
+typedef enum {
+ SiPchNoInt, ///< No Interrupt Pin
+ SiPchIntA,
+ SiPchIntB,
+ SiPchIntC,
+ SiPchIntD
+} SI_PCH_INT_PIN;
+///
+/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device.
+///
+typedef struct {
+ UINT8 Device; ///< Device number
+ UINT8 Function; ///< Device function
+ UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN)
+ UINT8 Irq; ///< IRQ to be set for device.
+} SI_PCH_DEVICE_INTERRUPT_CONFIG;
+
+#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices
+
+
+/** Fsp S Configuration
+**/
+typedef struct {
+
+/** Offset 0x0020 - Reserved
+**/
+ UINT8 Reserved0[16];
+
+/** Offset 0x0030 - Graphics Configuration Ptr
+ Points to VBT
+**/
+ UINT32 GraphicsConfigPtr;
+
+/** Offset 0x0034 - Enable Device 4
+ Enable/disable Device 4
+ $EN_DIS
+**/
+ UINT8 Device4Enable;
+
+/** Offset 0x0035 - Enable eMMC Controller
+ Enable/disable eMMC Controller.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcEnabled;
+
+/** Offset 0x0036 - Enable eMMC HS400 Mode
+ Enable eMMC HS400 Mode.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcHs400Enabled;
+
+/** Offset 0x0037 - Use DLL values from policy
+ Set if FSP should use HS400 DLL values from policy
+ $EN_DIS
+**/
+ UINT8 EmmcUseCustomDlls;
+
+/** Offset 0x0038 - Emmc Tx CMD Delay control register value
+ Please see Tx CMD Delay Control register definition for help
+**/
+ UINT32 EmmcTxCmdDelayRegValue;
+
+/** Offset 0x003C - Emmc Tx DATA Delay control 1 register value
+ Please see Tx DATA Delay control 1 register definition for help
+**/
+ UINT32 EmmcTxDataDelay1RegValue;
+
+/** Offset 0x0040 - Emmc Tx DATA Delay control 2 register value
+ Please see Tx DATA Delay control 2 register definition for help
+**/
+ UINT32 EmmcTxDataDelay2RegValue;
+
+/** Offset 0x0044 - Emmc Rx CMD + DATA Delay control 1 register value
+ Please see Rx CMD + DATA Delay control 1 register definition for help
+**/
+ UINT32 EmmcRxCmdDataDelay1RegValue;
+
+/** Offset 0x0048 - Emmc Rx CMD + DATA Delay control 2 register value
+ Please see Rx CMD + DATA Delay control 2 register definition for help
+**/
+ UINT32 EmmcRxCmdDataDelay2RegValue;
+
+/** Offset 0x004C - Emmc Rx Strobe Delay control register value
+ Please see Rx Strobe Delay control register definition for help
+**/
+ UINT32 EmmcRxStrobeDelayRegValue;
+
+/** Offset 0x0050 - Enable SdCard Controller
+ Enable/disable SD Card Controller.
+ $EN_DIS
+**/
+ UINT8 ScsSdCardEnabled;
+
+/** Offset 0x0051 - SdCard power enable polarity
+ Choose SD_PWREN# polarity
+ 0: Active low, 1: Active high
+**/
+ UINT8 SdCardPowerEnableActiveHigh;
+
+/** Offset 0x0052 - Reserved
+**/
+ UINT8 Reserved1[34];
+
+/** Offset 0x0074 - SdCard Command Pad Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up
+**/
+ UINT8 SdCardGpioCmdPadTermination;
+
+/** Offset 0x0075 - Reserved
+**/
+ UINT8 Reserved2[136];
+
+/** Offset 0x00FD - Enable SATA SALP Support
+ Enable/disable SATA Aggressive Link Power Management.
+ $EN_DIS
+**/
+ UINT8 SataSalpSupport;
+
+/** Offset 0x00FE - Enable SATA ports
+ Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1,
+ and so on.
+**/
+ UINT8 SataPortsEnable[8];
+
+/** Offset 0x0106 - Enable SATA DEVSLP Feature
+ Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each
+ port, byte0 for port0, byte1 for port1, and so on.
+**/
+ UINT8 SataPortsDevSlp[8];
+
+/** Offset 0x010E - Enable USB2 ports
+ Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb20Enable[16];
+
+/** Offset 0x011E - Enable USB3 ports
+ Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb30Enable[10];
+
+/** Offset 0x0128 - Enable xDCI controller
+ Enable/disable to xDCI controller.
+ $EN_DIS
+**/
+ UINT8 XdciEnable;
+
+/** Offset 0x0129 - Reserved
+**/
+ UINT8 Reserved3[28];
+
+/** Offset 0x0145 - Enable SATA
+ Enable/disable SATA controller.
+ $EN_DIS
+**/
+ UINT8 SataEnable;
+
+/** Offset 0x0146 - SATA Mode
+ Select SATA controller working mode.
+ 0:AHCI, 1:RAID
+**/
+ UINT8 SataMode;
+
+/** Offset 0x0147 - SPIn Device Mode
+ Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available
+ modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden
+**/
+ UINT8 SerialIoSpiMode[7];
+
+/** Offset 0x014E - SPI<N> Chip Select Polarity
+ Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow,
+ 1:SerialIoSpiCsActiveHigh
+**/
+ UINT8 SerialIoSpiCsPolarity[14];
+
+/** Offset 0x015C - Reserved
+**/
+ UINT8 Reserved4[21];
+
+/** Offset 0x0171 - SPIn Default Chip Select Mode HW/SW
+ Sets Default CS Mode Hardware or Software. N represents controller index: SPI0,
+ SPI1, ... Available options: 0:HW, 1:SW
+**/
+ UINT8 SerialIoSpiCsMode[7];
+
+/** Offset 0x0178 - SPIn Default Chip Select State Low/High
+ Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ...
+ Available options: 0:Low, 1:High
+**/
+ UINT8 SerialIoSpiCsState[7];
+
+/** Offset 0x017F - UARTn Device Mode
+ Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available
+ modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
+ 4:SerialIoUartSkipInit
+**/
+ UINT8 SerialIoUartMode[7];
+
+/** Offset 0x0186 - Reserved
+**/
+ UINT8 Reserved5[186];
+
+/** Offset 0x0240 - UART Number For Debug Purpose
+ UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5,
+ 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used
+ for debug purpose.
+ 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6
+**/
+ UINT8 SerialIoDebugUartNumber;
+
+/** Offset 0x0241 - Reserved
+**/
+ UINT8 Reserved6[7];
+
+/** Offset 0x0248 - I2Cn Device Mode
+ Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available
+ modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden
+**/
+ UINT8 SerialIoI2cMode[8];
+
+/** Offset 0x0250 - Reserved
+**/
+ UINT8 Reserved7[72];
+
+/** Offset 0x0298 - USB Per Port HS Preemphasis Bias
+ USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port.
+**/
+ UINT8 Usb2PhyPetxiset[16];
+
+/** Offset 0x02A8 - USB Per Port HS Transmitter Bias
+ USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port.
+**/
+ UINT8 Usb2PhyTxiset[16];
+
+/** Offset 0x02B8 - USB Per Port HS Transmitter Emphasis
+ USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
+ 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
+**/
+ UINT8 Usb2PhyPredeemp[16];
+
+/** Offset 0x02C8 - USB Per Port Half Bit Pre-emphasis
+ USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
+ One byte for each port.
+**/
+ UINT8 Usb2PhyPehalfbit[16];
+
+/** Offset 0x02D8 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
+ Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmphEnable[10];
+
+/** Offset 0x02E2 - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
+ USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16],
+ <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmph[10];
+
+/** Offset 0x02EC - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
+ Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmpEnable[10];
+
+/** Offset 0x02F6 - USB 3.0 TX Output Downscale Amplitude Adjustment
+ USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default
+ = 00h</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmp[10];
+
+/** Offset 0x0300 - Enable LAN
+ Enable/disable LAN controller.
+ $EN_DIS
+**/
+ UINT8 PchLanEnable;
+
+/** Offset 0x0301 - Reserved
+**/
+ UINT8 Reserved8[83];
+
+/** Offset 0x0354 - External V1P05 Voltage Value that will be used in S0i2/S0i3 states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtV1p05RailVoltage;
+
+/** Offset 0x0356 - External V1P05 Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtV1p05RailIccMax;
+
+/** Offset 0x0357 - Reserved
+**/
+ UINT8 Reserved9;
+
+/** Offset 0x0358 - External Vnn Voltage Value that will be used in S0ix/Sx states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtVnnRailVoltage;
+
+/** Offset 0x035A - External Vnn Icc Max Value that will be used in S0ix/Sx states
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailIccMax;
+
+/** Offset 0x035B - Reserved
+**/
+ UINT8 Reserved10;
+
+/** Offset 0x035C - External Vnn Voltage Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments
+ (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtVnnRailSxVoltage;
+
+/** Offset 0x035E - External Vnn Icc Max Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
+ is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailSxIccMax;
+
+/** Offset 0x035F - Reserved
+**/
+ UINT8 Reserved11[3];
+
+/** Offset 0x0362 - Transition time in microseconds from Off (0V) to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 Transition to 0V is disabled.
+**/
+ UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime;
+
+/** Offset 0x0364 - Reserved
+**/
+ UINT8 Reserved12[22];
+
+/** Offset 0x037A - CNVi BT Audio Offload
+ Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE
+ $EN_DIS
+**/
+ UINT8 CnviBtAudioOffload;
+
+/** Offset 0x037B - Reserved
+**/
+ UINT8 Reserved13;
+
+/** Offset 0x037C - CNVi RF_RESET pin muxing
+ Select CNVi RF_RESET# pin depending on board routing. ICP-N: GPP_H12 = 0x2746E40C(default)
+ or GPP_H1 = 0x3746E401. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h.
+**/
+ UINT32 CnviRfResetPinMux;
+
+/** Offset 0x0380 - CNVi CLKREQ pin muxing
+ Select CNVi CLKREQ pin depending on board routing. ICP-N: GPP_H13 = 0x2746E60D(default)
+ or GPP_H2 = 0x3746E602. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in GpioPins*.h.
+**/
+ UINT32 CnviClkreqPinMux;
+
+/** Offset 0x0384 - Reserved
+**/
+ UINT8 Reserved14[6];
+
+/** Offset 0x038A - HECI3 state
+ The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
+ 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 Heci3Enabled;
+
+/** Offset 0x038B - Reserved
+**/
+ UINT8 Reserved15[141];
+
+/** Offset 0x0418 - CdClock Frequency selection
+ 0: (Default) Auto (Max based on reference clock frequency), 1: 172.8 Mhz, 2: 180
+ Mhz, 3: 190 Mhz, 4: 307.2 Mhz, 5: 312 Mhz, 6: 552 Mhz, 7: 556.8 Mhz, 8: 648 Mhz,
+ 9: 652.8 Mhz
+ 0: Auto (Max based on reference clock frequency), 1: 172.8 Mhz, 2: 180 Mhz, 3: 190
+ Mhz, 4: 307.2 Mhz, 5: 312 Mhz, 6: 552 Mhz, 7: 556.8 Mhz, 8: 648 Mhz, 9: 652.8 Mhz
+**/
+ UINT8 CdClock;
+
+/** Offset 0x0419 - Enable/Disable PeiGraphicsPeimInit
+ Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit
+ $EN_DIS
+**/
+ UINT8 PeiGraphicsPeimInit;
+
+/** Offset 0x041A - Reserved
+**/
+ UINT8 Reserved16[160];
+
+/** Offset 0x04BA - Skip Multi-Processor Initialization
+ When this is skipped, boot loader must initialize processors before SilicionInit
+ API. </b>0: Initialize; <b>1: Skip
+ $EN_DIS
+**/
+ UINT8 SkipMpInit;
+
+/** Offset 0x04BB - Reserved
+**/
+ UINT8 Reserved17[9];
+
+/** Offset 0x04C4 - CpuMpPpi
+ Pointer for CpuMpPpi
+**/
+ UINT32 CpuMpPpi;
+
+/** Offset 0x04C8 - Reserved
+**/
+ UINT8 Reserved18[86];
+
+/** Offset 0x051E - RTC Cmos Memory Lock
+ Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
+ and and lower 128-byte bank of RTC RAM.
+ $EN_DIS
+**/
+ UINT8 RtcMemoryLock;
+
+/** Offset 0x051F - Reserved
+**/
+ UINT8 Reserved19[24];
+
+/** Offset 0x0537 - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 PcieRpPmSci[24];
+
+/** Offset 0x054F - Reserved
+**/
+ UINT8 Reserved20[24];
+
+/** Offset 0x0567 - Enable PCIE RP Clk Req Detect
+ Probe CLKREQ# signal before enabling CLKREQ# based power management.
+**/
+ UINT8 PcieRpClkReqDetect[24];
+
+/** Offset 0x057F - Reserved
+**/
+ UINT8 Reserved21[455];
+
+/** Offset 0x0746 - PCH Pm Slp S3 Min Assert
+ SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
+**/
+ UINT8 PchPmSlpS3MinAssert;
+
+/** Offset 0x0747 - Reserved
+**/
+ UINT8 Reserved22;
+
+/** Offset 0x0748 - PCH Pm Slp Sus Min Assert
+ SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
+**/
+ UINT8 PchPmSlpSusMinAssert;
+
+/** Offset 0x0749 - PCH Pm Slp A Min Assert
+ SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
+**/
+ UINT8 PchPmSlpAMinAssert;
+
+/** Offset 0x074A - Reserved
+**/
+ UINT8 Reserved23[11];
+
+/** Offset 0x0755 - PCH Sata Pwr Opt Enable
+ SATA Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 SataPwrOptEnable;
+
+/** Offset 0x0756 - Reserved
+**/
+ UINT8 Reserved24[146];
+
+/** Offset 0x07E8 - USB2 Port Over Current Pin
+ Describe the specific over current pin number of USB 2.0 Port N.
+**/
+ UINT8 Usb2OverCurrentPin[16];
+
+/** Offset 0x07F8 - USB3 Port Over Current Pin
+ Describe the specific over current pin number of USB 3.0 Port N.
+**/
+ UINT8 Usb3OverCurrentPin[10];
+
+/** Offset 0x0802 - Enable 8254 Static Clock Gating
+ Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
+ might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
+ legacy OS using 8254 timer. Also enable this while S0ix is enabled.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGating;
+
+/** Offset 0x0803 - Enable 8254 Static Clock Gating On S3
+ This is only applicable when Enable8254ClockGating is disabled. FSP will do the
+ 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
+ avoids the SMI requirement for the programming.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGatingOnS3;
+
+/** Offset 0x0804 - Reserved
+**/
+ UINT8 Reserved25[531];
+
+/** Offset 0x0A17 - Enable/Disable IGFX PmSupport
+ Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
+ $EN_DIS
+**/
+ UINT8 PmSupport;
+
+/** Offset 0x0A18 - Reserved
+**/
+ UINT8 Reserved26[32];
+
+/** Offset 0x0A38 - TCC Activation Offset
+ TCC Activation Offset. Offset from factory set TCC activation temperature at which
+ the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
+ Temperature, in volts.For SKL Y SKU, the recommended default for this policy is
+ <b>10</b>, For all other SKUs the recommended default are <b>0</b>
+**/
+ UINT8 TccActivationOffset;
+
+/** Offset 0x0A39 - Reserved
+**/
+ UINT8 Reserved27[34];
+
+/** Offset 0x0A5B - Enable or Disable CPU power states (C-states)
+ Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Cx;
+
+/** Offset 0x0A5C - Reserved
+**/
+ UINT8 Reserved28[74];
+
+/** Offset 0x0AA6 - Platform Power Pmax
+ PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
+ Range 0-1024 Watts. Value of 800 = 100W
+**/
+ UINT16 PsysPmax;
+
+/** Offset 0x0AA8 - Reserved
+**/
+ UINT8 Reserved29[116];
+
+/** Offset 0x0B1C - End of Post message
+ Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
+ EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE
+ 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
+**/
+ UINT8 EndOfPostMessage;
+
+/** Offset 0x0B1D - Reserved
+**/
+ UINT8 Reserved30[3];
+
+/** Offset 0x0B20 - Unlock all GPIO pads
+ Force all GPIO pads to be unlocked for debug purpose.
+ $EN_DIS
+**/
+ UINT8 PchUnlockGpioPads;
+
+/** Offset 0x0B21 - Reserved
+**/
+ UINT8 Reserved31[447];
+} FSP_S_CONFIG;
+
+/** Fsp S UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSP_S_CONFIG FspsConfig;
+
+/** Offset 0x0CE0
+**/
+ UINT8 UnusedUpdSpace37[6];
+
+/** Offset 0x0CE6
+**/
+ UINT16 UpdTerminator;
+} FSPS_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FsptUpd.h
new file mode 100644
index 0000000000..508705c13f
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FsptUpd.h
@@ -0,0 +1,186 @@
+/** @file
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPTUPD_H__
+#define __FSPTUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+/** Fsp T Core UPD
+**/
+typedef struct {
+
+/** Offset 0x0020
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x0024
+**/
+ UINT32 MicrocodeRegionSize;
+
+/** Offset 0x0028
+**/
+ UINT32 CodeRegionBase;
+
+/** Offset 0x002C
+**/
+ UINT32 CodeRegionSize;
+
+/** Offset 0x0030
+**/
+ UINT8 Reserved[16];
+} FSPT_CORE_UPD;
+
+/** Fsp T Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - PcdSerialIoUartDebugEnable
+ Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP.
+ 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
+**/
+ UINT8 PcdSerialIoUartDebugEnable;
+
+/** Offset 0x0041 - PcdSerialIoUartNumber - FSPT
+ Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
+ Core interface, it cannot be used for debug purpose.
+ 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
+**/
+ UINT8 PcdSerialIoUartNumber;
+
+/** Offset 0x0042 - PcdSerialIoUartMode - FSPT
+ Select SerialIo Uart Controller mode
+ 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
+ 4:SerialIoUartSkipInit
+**/
+ UINT8 PcdSerialIoUartMode;
+
+/** Offset 0x0043
+**/
+ UINT8 UnusedUpdSpace0;
+
+/** Offset 0x0044 - PcdSerialIoUartBaudRate - FSPT
+ Set default BaudRate Supported from 0 - default to 6000000
+**/
+ UINT32 PcdSerialIoUartBaudRate;
+
+/** Offset 0x0048 - Pci Express Base Address
+ Base address to be programmed for Pci Express
+**/
+ UINT64 PcdPciExpressBaseAddress;
+
+/** Offset 0x0050 - Pci Express Region Length
+ Region Length to be programmed for Pci Express
+**/
+ UINT32 PcdPciExpressRegionLength;
+
+/** Offset 0x0054 - PcdSerialIoUartParity - FSPT
+ Set default Parity.
+ 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 PcdSerialIoUartParity;
+
+/** Offset 0x0055 - PcdSerialIoUartDataBits - FSPT
+ Set default word length. 0: Default, 5,6,7,8
+**/
+ UINT8 PcdSerialIoUartDataBits;
+
+/** Offset 0x0056 - PcdSerialIoUartStopBits - FSPT
+ Set default stop bits.
+ 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
+**/
+ UINT8 PcdSerialIoUartStopBits;
+
+/** Offset 0x0057 - PcdSerialIoUartAutoFlow - FSPT
+ Enables UART hardware flow control, CTS and RTS lines.
+ 0: Disable, 1:Enable
+**/
+ UINT8 PcdSerialIoUartAutoFlow;
+
+/** Offset 0x0058 - PcdSerialIoUartRxPinMux - FSPT
+ Select RX pin muxing for SerialIo UART used for debug
+**/
+ UINT32 PcdSerialIoUartRxPinMux;
+
+/** Offset 0x005C - PcdSerialIoUartTxPinMux - FSPT
+ Select TX pin muxing for SerialIo UART used for debug
+**/
+ UINT32 PcdSerialIoUartTxPinMux;
+
+/** Offset 0x0060 - PcdSerialIoUartRtsPinMux - FSPT
+ Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
+ for possible values.
+**/
+ UINT32 PcdSerialIoUartRtsPinMux;
+
+/** Offset 0x0064 - PcdSerialIoUartCtsPinMux - FSPT
+ Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
+ for possible values.
+**/
+ UINT32 PcdSerialIoUartCtsPinMux;
+
+/** Offset 0x0068
+**/
+ UINT8 ReservedFsptUpd1[24];
+} FSP_T_CONFIG;
+
+/** Fsp T UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSPT_CORE_UPD FsptCoreUpd;
+
+/** Offset 0x0040
+**/
+ FSP_T_CONFIG FsptConfig;
+
+/** Offset 0x0080
+**/
+ UINT8 UnusedUpdSpace1[6];
+
+/** Offset 0x0086
+**/
+ UINT16 UpdTerminator;
+} FSPT_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/MemInfoHob.h
new file mode 100644
index 0000000000..c590409f02
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/MemInfoHob.h
@@ -0,0 +1,274 @@
+/** @file
+ This file contains definitions required for creation of
+ Memory S3 Save data, Memory Info data and Memory Platform
+ data hobs.
+
+ @copyright
+ Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License that accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+@par Specification Reference:
+**/
+#ifndef _MEM_INFO_HOB_H_
+#define _MEM_INFO_HOB_H_
+
+#include <Uefi/UefiMultiPhase.h>
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#pragma pack (push, 1)
+
+extern EFI_GUID gSiMemoryS3DataGuid;
+extern EFI_GUID gSiMemoryInfoDataGuid;
+extern EFI_GUID gSiMemoryPlatformDataGuid;
+
+#define MAX_NODE 1
+#define MAX_CH 2
+#define MAX_DIMM 2
+
+///
+/// Host reset states from MRC.
+///
+#define WARM_BOOT 2
+
+#define R_MC_CHNL_RANK_PRESENT 0x7C
+#define B_RANK0_PRS BIT0
+#define B_RANK1_PRS BIT1
+#define B_RANK2_PRS BIT4
+#define B_RANK3_PRS BIT5
+
+///
+/// Defines taken from MRC so avoid having to include MrcInterface.h
+///
+
+//
+// Matches MAX_SPD_SAVE define in MRC
+//
+#ifndef MAX_SPD_SAVE
+#define MAX_SPD_SAVE 29
+#endif
+
+//
+// MRC version description.
+//
+typedef struct {
+ UINT8 Major; ///< Major version number
+ UINT8 Minor; ///< Minor version number
+ UINT8 Rev; ///< Revision number
+ UINT8 Build; ///< Build number
+} SiMrcVersion;
+
+//
+// Matches MrcChannelSts enum in MRC
+//
+#ifndef CHANNEL_NOT_PRESENT
+#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller.
+#endif
+#ifndef CHANNEL_DISABLED
+#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled.
+#endif
+#ifndef CHANNEL_PRESENT
+#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled.
+#endif
+
+//
+// Matches MrcDimmSts enum in MRC
+//
+#ifndef DIMM_ENABLED
+#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected.
+#endif
+#ifndef DIMM_DISABLED
+#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence.
+#endif
+#ifndef DIMM_PRESENT
+#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used.
+#endif
+#ifndef DIMM_NOT_PRESENT
+#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair.
+#endif
+
+//
+// Matches MrcBootMode enum in MRC
+//
+#ifndef bmCold
+#define bmCold 0 // Cold boot
+#endif
+#ifndef bmWarm
+#define bmWarm 1 // Warm boot
+#endif
+#ifndef bmS3
+#define bmS3 2 // S3 resume
+#endif
+#ifndef bmFast
+#define bmFast 3 // Fast boot
+#endif
+
+//
+// Matches MrcDdrType enum in MRC
+//
+#ifndef MRC_DDR_TYPE_DDR4
+#define MRC_DDR_TYPE_DDR4 0
+#endif
+#ifndef MRC_DDR_TYPE_DDR3
+#define MRC_DDR_TYPE_DDR3 1
+#endif
+#ifndef MRC_DDR_TYPE_LPDDR3
+#define MRC_DDR_TYPE_LPDDR3 2
+#endif
+#ifndef CPU_CFL//CNL
+#ifndef MRC_DDR_TYPE_LPDDR4
+#define MRC_DDR_TYPE_LPDDR4 3
+#endif
+#else//CFL
+#ifndef MRC_DDR_TYPE_UNKNOWN
+#define MRC_DDR_TYPE_UNKNOWN 3
+#endif
+#endif//CPU_CFL-endif
+
+#define MAX_PROFILE_NUM 4 // number of memory profiles supported
+#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported
+
+//
+// DIMM timings
+//
+typedef struct {
+ UINT32 tCK; ///< Memory cycle time, in femtoseconds.
+ UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode.
+ UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency.
+ UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time.
+ UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time.
+ UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time.
+ UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time.
+ UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval.
+ UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time.
+ UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks.
+ UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time.
+ UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups.
+ UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups.
+ UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time.
+ UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time.
+ UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time.
+ UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups.
+ UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups.
+ UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group.
+} MRC_CH_TIMING;
+
+typedef struct {
+ UINT8 SG; ///< Number of tCK cycles between transactions in the same bank group.
+ UINT8 DG; ///< Number of tCK cycles between transactions when switching bank groups.
+ UINT8 DR; ///< Number of tCK cycles between transactions when switching between Ranks (in the same DIMM).
+ UINT8 DD; ///< Number of tCK cycles between transactions when switching between DIMMs.
+} MRC_TA_TIMING;
+
+///
+/// Memory SMBIOS & OC Memory Data Hob
+///
+typedef struct {
+ UINT8 Status; ///< See MrcDimmStatus for the definition of this field.
+ UINT8 DimmId;
+ UINT32 DimmCapacity; ///< DIMM size in MBytes.
+ UINT16 MfgId;
+ UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes
+ UINT8 RankInDimm; ///< The number of ranks in this DIMM.
+ UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation.
+ UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation.
+ UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation.
+ UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation.
+ UINT16 Speed; ///< The maximum capable speed of the device, in MHz.
+} DIMM_INFO;
+
+typedef struct {
+ UINT8 Status; ///< Indicates whether this channel should be used.
+ UINT8 ChannelId;
+ UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel.
+ MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values.
+ DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics.
+ MRC_TA_TIMING tRd2Rd; ///< Read-to-Read Turn Around Timings
+ MRC_TA_TIMING tRd2Wr; ///< Read-to-Write Turn Around Timings
+ MRC_TA_TIMING tWr2Rd; ///< Write-to-Read Turn Around Timings
+ MRC_TA_TIMING tWr2Wr; ///< Write-to-Write Turn Around Timings
+} CHANNEL_INFO;
+
+typedef struct {
+ UINT8 Status; ///< Indicates whether this controller should be used.
+ UINT16 DeviceId; ///< The PCI device id of this memory controller.
+ UINT8 RevisionId; ///< The PCI revision id of this memory controller.
+ UINT8 ChannelCount; ///< Number of valid channels that exist on the controller.
+ CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions.
+ MRC_TA_TIMING tRd2Rd; ///< Deprecated and moved to CHANNEL_INFO. Read-to-Read Turn Around Timings
+ MRC_TA_TIMING tRd2Wr; ///< Deprecated and moved to CHANNEL_INFO. Read-to-Write Turn Around Timings
+ MRC_TA_TIMING tWr2Rd; ///< Deprecated and moved to CHANNEL_INFO. Write-to-Read Turn Around Timings
+ MRC_TA_TIMING tWr2Wr; ///< Deprecated and moved to CHANNEL_INFO. Write-to-Write Turn Around Timings
+} CONTROLLER_INFO;
+
+typedef struct {
+ UINT8 Revision;
+ UINT16 DataWidth; ///< Data width, in bits, of this memory device
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.18.2 and Table 75
+ **/
+ UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3
+ UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz)
+ UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz)
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.17.3 and Table 72
+ **/
+ UINT8 ErrorCorrectionType;
+
+ SiMrcVersion Version;
+ BOOLEAN EccSupport;
+ UINT8 MemoryProfile;
+ UINT32 TotalPhysicalMemorySize;
+ UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist.
+ UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs.
+ UINT8 Ratio;
+ UINT8 RefClk;
+ UINT32 VddVoltage[MAX_PROFILE_NUM];
+ CONTROLLER_INFO Controller[MAX_NODE];
+} MEMORY_INFO_DATA_HOB;
+
+/**
+ Memory Platform Data Hob
+
+ <b>Revision 1:</b>
+ - Initial version.
+ <b>Revision 2:</b>
+ - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields
+**/
+typedef struct {
+ UINT8 Revision;
+ UINT8 Reserved[3];
+ UINT32 BootMode;
+ UINT32 TsegSize;
+ UINT32 TsegBase;
+ UINT32 PrmrrSize;
+ UINT32 PrmrrBase;
+ UINT32 GttBase;
+ UINT32 MmioSize;
+ UINT32 PciEBaseAddress;
+#ifdef CPU_CFL
+ UINT32 GdxcIotBase;
+ UINT32 GdxcIotSize;
+ UINT32 GdxcMotBase;
+ UINT32 GdxcMotSize;
+#endif //CPU_CFL
+} MEMORY_PLATFORM_DATA;
+
+typedef struct {
+ EFI_HOB_GUID_TYPE EfiHobGuidType;
+ MEMORY_PLATFORM_DATA Data;
+ UINT8 *Buffer;
+} MEMORY_PLATFORM_DATA_HOB;
+
+#pragma pack (pop)
+
+#endif // _MEM_INFO_HOB_H_