diff options
Diffstat (limited to 'src/vendorcode')
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/apollolake/FspUpd.h | 48 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/apollolake/FspmUpd.h | 721 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/apollolake/FspsUpd.h | 1541 |
3 files changed, 2310 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspUpd.h new file mode 100644 index 0000000000..a7114ce39e --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(push, 1) + +#define FSPT_UPD_SIGNATURE 0x545F4450554C5041 /* 'APLUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F4450554C5041 /* 'APLUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F4450554C5041 /* 'APLUPD_S' */ + +#pragma pack(pop) + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspmUpd.h new file mode 100644 index 0000000000..48225e0779 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspmUpd.h @@ -0,0 +1,721 @@ +/** @file + +Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(push, 1) + + +#define MAX_CHANNELS_NUM 4 +#define MAX_DIMMS_NUM 1 + +typedef struct { + UINT8 DimmId; + UINT32 SizeInMb; + UINT16 MfgId; + /** Module part number for DRR3 is 18 bytes + but DRR4 is 20 bytes as per JEDEC Spec, so + reserving 20 bytes **/ + UINT8 ModulePartNum[20]; +} DIMM_INFO; + +typedef struct { + UINT8 ChannelId; + UINT8 DimmCount; + DIMM_INFO DimmInfo[MAX_DIMMS_NUM]; +} CHANNEL_INFO; + +typedef struct { + UINT8 Revision; + UINT8 DataWidth; + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT16 MemoryType; + UINT16 MemoryFrequencyInMHz; + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + UINT8 ChannelCount; + CHANNEL_INFO ChannelInfo[MAX_CHANNELS_NUM]; +} FSP_SMBIOS_MEMORY_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Debug Serial Port Base address + Debug serial port base address. This option will be used only when the 'Serial Port + Debug Device' option is set to 'External Device'. 0x00000000(Default). +**/ + UINT32 SerialDebugPortAddress; + +/** Offset 0x0044 - Debug Serial Port Type + 16550 compatible debug serial port resource type. NONE means no serial port support. + 0x02:MMIO(Default). + 0:NONE, 1:I/O, 2:MMIO +**/ + UINT8 SerialDebugPortType; + +/** Offset 0x0045 - Serial Port Debug Device + Select active serial port device for debug. For SOC UART devices,'Debug Serial Port + Base' options will be ignored. 0x02:SOC UART2(Default). + 0:SOC UART0, 1:SOC UART1, 2:SOC UART2, 3:External Device +**/ + UINT8 SerialDebugPortDevice; + +/** Offset 0x0046 - Debug Serial Port Stride Size + Debug serial port register map stride size in bytes. 0x00:1, 0x02:4(Default). + 0:1, 2:4 +**/ + UINT8 SerialDebugPortStrideSize; + +/** Offset 0x0047 - Memory Fast Boot + Enable/Disable MRC fast boot support. 0x00:Disable, 0x01:Enable(Default). + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x0048 - Integrated Graphics Device + Enable : Enable Integrated Graphics Device (IGD) when selected as the Primary Video + Adaptor. Disable: Always disable IGD. 0x00:Disable, 0x01:Enable(Default). + $EN_DIS +**/ + UINT8 Igd; + +/** Offset 0x0049 - DVMT Pre-Allocated + Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal + Graphics Device. 0x02:64 MB(Default). + 0x02:64 MB, 0x03:96 MB, 0x04:128 MB, 0x05:160 MB, 0x06:192 MB, 0x07:224 MB, 0x08:256 + MB, 0x09:288 MB, 0x0A:320 MB, 0x0B:352 MB, 0x0C:384 MB, 0x0D:416 MB, 0x0E:448 MB, + 0x0F:480 MB, 0x10:512 MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x004A - Aperture Size + Select the Aperture Size used by the Internal Graphics Device. 0x1:128 MB(Default), + 0x2:256 MB, 0x3:512 MB. + 0x1:128 MB, 0x2:256 MB, 0x3:512 MB +**/ + UINT8 IgdApertureSize; + +/** Offset 0x004B - GTT Size + Select the GTT Size used by the Internal Graphics Device. 0x1:2 MB, 0x2:4 MB, 0x3:8 + MB(Default). + 0x1:2 MB, 0x2:4 MB, 0x3:8 MB +**/ + UINT8 GttSize; + +/** Offset 0x004C - Primary Display + Select which of IGD/PCI Graphics device should be Primary Display. 0x0:AUTO(Default), + 0x2:IGD, 0x3:PCI + 0x0:AUTO, 0x2:IGD, 0x3:PCI +**/ + UINT8 PrimaryVideoAdaptor; + +/** Offset 0x004D - Package + NOTE: First option is CoPOP if LPDDR3/LPDDR4 is being used. It is SODIMM if DDR3L + is being used. 0x00(Default). + 0x0:CoPop, 0x1:BGA, 0x2:LP3 ACRD +**/ + UINT8 Package; + +/** Offset 0x004E - Profile + Profile list. 0x19(Default). + 0x1:WIO2_800_7_8_8, 0x2:WIO2_1066_9_10_10, 0x3:LPDDR3_1066_8_10_10, 0x4:LPDDR3_1333_10_12_12, + 0x5:LPDDR3_1600_12_15_15, 0x6:LPDDR3_1866_14_17_17, 0x7:LPDDR3_2133_16_20_20, 0x8:LPDDR4_1066_10_10_10, + 0x9:LPDDR4_1600_14_15_15, 0xA:LPDDR4_2133_20_20_20, 0xB:LPDDR4_2400_24_22_22, 0xC:LPDDR4_2666_24_24_24, + 0xD:LPDDR4_2933_28_27_27, 0xE:LPDDR4_3200_28_29_29, 0xF:DDR3_1066_6_6_6, 0x10:DDR3_1066_7_7_7, + 0x11:DDR3_1066_8_8_8, 0x12:DDR3_1333_7_7_7, 0x13:DDR3_1333_8_8_8, 0x14:DDR3_1333_9_9_9, + 0x15:DDR3_1333_10_10_10, 0x16:DDR3_1600_8_8_8, 0x17:DDR3_1600_9_9_9, 0x18:DDR3_1600_10_10_10, + 0x19:DDR3_1600_11_11_11, 0x1A:DDR3_1866_10_10_10, 0x1B:DDR3_1866_11_11_11, 0x1C:DDR3_1866_12_12_12, + 0x1D:DDR3_1866_13_13_13, 0x1E:DDR3_2133_11_11_11, 0x1F:DDR3_2133_12_12_12, 0x20:DDR3_2133_13_13_13, + 0x21:DDR3_2133_14_14_14, 0x22:DDR4_1333_10_10_10, 0x23:DDR4_1600_10_10_10, 0x24:DDR4_1600_11_11_11, + 0x25:DDR4_1600_12_12_12, 0x26:DDR4_1866_12_12_12, 0x27:DDR4_1866_13_13_13, 0x28:DDR4_1866_14_14_14, + 0x29:DDR4_2133_14_14_14, 0x2A:DDR4_2133_15_15_15, 0x2B:DDR4_2133_16_16_16, 0x2C:DDR4_2400_15_15_15, + 0x2D:DDR4_2400_16_16_16, 0x2E:DDR4_2400_17_17_17, 0x2F:DDR4_2400_18_18_18 +**/ + UINT8 Profile; + +/** Offset 0x004F - MemoryDown + Memory Down. 0x0(Default). + 0x0:No, 0x1:Yes, 0x2:1MD+SODIMM (for DDR3L only) ACRD, 0x3:1x32 LPDDR4 +**/ + UINT8 MemoryDown; + +/** Offset 0x0050 - DDR3LPageSize + NOTE: Only for memory down or downgrade DDR3L frequency. 0x01:1KB(Default), 0x02:2KB. + 0x1:1KB, 0x2:2KB +**/ + UINT8 DDR3LPageSize; + +/** Offset 0x0051 - DDR3LASR + NOTE: Only for memory down. 0x00:Not Supported(Default), 0x01:Supported. + 0x0:Not Supported, 0x1:Supported +**/ + UINT8 DDR3LASR; + +/** Offset 0x0052 - ScramblerSupport + Scrambler Support. 0x00:Not Supported, 0x01:Supported(Default). + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x0053 - ChannelHashMask + Channel Hash Mask. 0x00(Default). +**/ + UINT16 ChannelHashMask; + +/** Offset 0x0055 - SliceHashMask + Slice Hash Mask. 0x00(Default). +**/ + UINT16 SliceHashMask; + +/** Offset 0x0057 - InterleavedMode + Interleaved Mode. 0x00:Disable(Default), 0x02:Enable. + 0x0:Disable, 0x2:Enable +**/ + UINT8 InterleavedMode; + +/** Offset 0x0058 - ChannelsSlicesEnable + Channels Slices Enable. 0x00:Disable(Default), 0x01:Enable. + $EN_DIS +**/ + UINT8 ChannelsSlicesEnable; + +/** Offset 0x0059 - MinRefRate2xEnable + Provided as a means to defend against Row-Hammer attacks. 0x00:Disable(Default), + 0x01:Enable. + $EN_DIS +**/ + UINT8 MinRefRate2xEnable; + +/** Offset 0x005A - DualRankSupportEnable + Dual Rank Support Enable. 0x00:Disable, 0x01:Enable(Default). + $EN_DIS +**/ + UINT8 DualRankSupportEnable; + +/** Offset 0x005B - RmtMode + Rank Margin Tool Mode. 0x00(Default). + $EN_DIS +**/ + UINT8 RmtMode; + +/** Offset 0x005C - MemorySizeLimit + Memory Size Limit: This value is used to restrict the total amount of memory and + the calculations based on it. Value is in MB. Example encodings are: 0x400 = 1GB, + 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default) +**/ + UINT16 MemorySizeLimit; + +/** Offset 0x005E - LowMemoryMaxValue + Low Memory Max Value: This value is used to restrict the amount of memory below + 4GB and the calculations based on it. Value is in MB.Example encodings are: 0x400 + = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default). +**/ + UINT16 LowMemoryMaxValue; + +/** Offset 0x0060 - DisableFastBoot + 00:Disabled Used saved training data (if valid)(Default), 01:Enabled; Full re-train + of memory. + $EN_DIS +**/ + UINT8 DisableFastBoot; + +/** Offset 0x0061 - HighMemoryMaxValue + High Memory Max Value: This value is used to restrict the amount of memory above + 4GB and the calculations based on it. Value is in MB. Example encodings are: 0x0400:1GB, + 0x0800:2GB, 0x1000:4GB, 0x2000:8GB. 0x00(Default). +**/ + UINT16 HighMemoryMaxValue; + +/** Offset 0x0063 - DIMM0SPDAddress + DIMM0 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. 0xA0(Default). +**/ + UINT8 DIMM0SPDAddress; + +/** Offset 0x0064 - DIMM1SPDAddress + DIMM1 SPD Address (NOTE: Only for DDR3L only. Please put 0 for MemoryDown. 0xA4(Default). +**/ + UINT8 DIMM1SPDAddress; + +/** Offset 0x0065 - Ch0_RankEnable + NOTE: Only for memory down. Set to 1 to enable Ch0 rank. 0x00(Default). +**/ + UINT8 Ch0_RankEnable; + +/** Offset 0x0066 - Ch0_DeviceWidth + NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00(Default). + 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 +**/ + UINT8 Ch0_DeviceWidth; + +/** Offset 0x0067 - Ch0_DramDensity + NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00(Default). + 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb +**/ + UINT8 Ch0_DramDensity; + +/** Offset 0x0068 - Ch0_Option + Rank Select Interleaving Enable. See Address Mapping section for full description. + 0:Rank Select Interleaving disabled, 1:Rank Select Interleaving enabled. [1] Bank + Address Hashing Enable. See Address Mapping section for full description. 0:Bank + Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. [5:4] + This register specifies the address mapping to be used: 00:1KB (A), 01:2KB (B). + 0x03(Default). +**/ + UINT8 Ch0_Option; + +/** Offset 0x0069 - Ch0_OdtConfig + ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. +**/ + UINT8 Ch0_OdtConfig; + +/** Offset 0x006A - Ch0_TristateClk1 + Parameter used to determine whether to tristate CLK1. 0x00(Default). +**/ + UINT8 Ch0_TristateClk1; + +/** Offset 0x006B - Ch0_Mode2N + 2N Mode. 0x00(Default). +**/ + UINT8 Ch0_Mode2N; + +/** Offset 0x006C - Ch0_OdtLevels + Rank Select Interleaving Enable. See Address Mapping section for full description. + 0:Rank Select Interleaving disabled(Default), 1:Rank Select Interleaving enabled. + [1] Bank Address Hashing Enable. See Address Mapping section for full description. + 0:Bank Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. + [5:4] This register specifies the address mapping to be used:00:1KB (A), 01:2KB (B). +**/ + UINT8 Ch0_OdtLevels; + +/** Offset 0x006D - Ch1_RankEnable + NOTE: Only for memory down. Set to 1 to enable Ch1 rank. +**/ + UINT8 Ch1_RankEnable; + +/** Offset 0x006E - Ch1_DeviceWidth + NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00(Default). + 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 +**/ + UINT8 Ch1_DeviceWidth; + +/** Offset 0x006F - Ch1_DramDensity + NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00:4Gb(Default). + 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb +**/ + UINT8 Ch1_DramDensity; + +/** Offset 0x0070 - Ch1_Option + Rank Select Interleaving Enable. See Address Mapping section for full description. + 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] + Bank Address Hashing Enable. See Address Mapping section for full description. + 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. + [5:4] This register specifies the address mapping to be used: 00:1KB (A), 01:2KB + (B), 0x03(Default). +**/ + UINT8 Ch1_Option; + +/** Offset 0x0071 - Ch1_OdtConfig + ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. +**/ + UINT8 Ch1_OdtConfig; + +/** Offset 0x0072 - Ch1_TristateClk1 + Parameter used to determine whether to tristate CLK1. 0x00(Default). +**/ + UINT8 Ch1_TristateClk1; + +/** Offset 0x0073 - Ch1_Mode2N + 2N Mode. 0x00(Default). +**/ + UINT8 Ch1_Mode2N; + +/** Offset 0x0074 - Ch1_OdtLevels + Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), + 1:ODT_AB_HIGH_HIGH. 3:ODT_AB_HIGH_LOW. +**/ + UINT8 Ch1_OdtLevels; + +/** Offset 0x0075 - Ch2_RankEnable + NOTE: Only for memory down. Set to 1 to enable Ch2 rank. +**/ + UINT8 Ch2_RankEnable; + +/** Offset 0x0076 - Ch2_DeviceWidth + NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. + 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 +**/ + UINT8 Ch2_DeviceWidth; + +/** Offset 0x0077 - Ch2_DramDensity + NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00(Default). + 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb +**/ + UINT8 Ch2_DramDensity; + +/** Offset 0x0078 - Ch2_Option + Rank Select Interleaving Enable. See Address Mapping section for full description.. + 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] + Bank Address Hashing Enable. See Address Mapping section for full description.. + 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. + [5:4] This register specifies the address mapping to be used:. 00:1KB (A)(Default). + 01:2KB (B). +**/ + UINT8 Ch2_Option; + +/** Offset 0x0079 - Ch2_OdtConfig + ODT configuration control. 0:WEAK_ODT_CONFIG(Default), 1:STRONG_ODT_CONFIG. +**/ + UINT8 Ch2_OdtConfig; + +/** Offset 0x007A - Ch2_TristateClk1 + Parameter used to determine whether to tristate CLK1. 0x00(Default). +**/ + UINT8 Ch2_TristateClk1; + +/** Offset 0x007B - Ch2_Mode2N + 2N Mode. 0x00(Default). +**/ + UINT8 Ch2_Mode2N; + +/** Offset 0x007C - Ch2_OdtLevels + Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), + 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW. +**/ + UINT8 Ch2_OdtLevels; + +/** Offset 0x007D - Ch3_RankEnable + NOTE: Only for memory down. Set to 1 to enable Ch3 rank. 0x00(Default). +**/ + UINT8 Ch3_RankEnable; + +/** Offset 0x007E - Ch3_DeviceWidth + NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00:x8(Default), + 0x01:x16, 0x02:x32, 0x03:x64. + 0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64 +**/ + UINT8 Ch3_DeviceWidth; + +/** Offset 0x007F - Ch3_DramDensity + NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00:4Gb(Default), + 0x01:6Gb, 0x02:8Gb, 0x03:12Gb, 0x04:16Gb. + 0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb +**/ + UINT8 Ch3_DramDensity; + +/** Offset 0x0080 - Ch3_Option + Rank Select Interleaving Enable. See Address Mapping section for full description.. + 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] + Bank Address Hashing Enable. See Address Mapping section for full description.. + 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. + [5:4] This register specifies the address mapping to be used:. 00 - 1KB (A). 01 + - 2KB (B). +**/ + UINT8 Ch3_Option; + +/** Offset 0x0081 - Ch3_OdtConfig + ODT configuration control.. 0:WEAK_ODT_CONFIG(Default). 1:STRONG_ODT_CONFIG. +**/ + UINT8 Ch3_OdtConfig; + +/** Offset 0x0082 - Ch3_TristateClk1 + Parameter used to determine whether to tristate CLK1. 0x00(Default). +**/ + UINT8 Ch3_TristateClk1; + +/** Offset 0x0083 - Ch3_Mode2N + 2N Mode. 0x00(Default). +**/ + UINT8 Ch3_Mode2N; + +/** Offset 0x0084 - Ch3_OdtLevels + Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), + 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW. +**/ + UINT8 Ch3_OdtLevels; + +/** Offset 0x0085 - RmtCheckRun + RmtCheckRun: 0x00(Default). +**/ + UINT8 RmtCheckRun; + +/** Offset 0x0086 - Ch0_Bit_swizzling + Channel 0 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. +**/ + UINT8 Ch0_Bit_swizzling[32]; + +/** Offset 0x00A6 - Ch1_Bit_swizzling + Channel 1 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. +**/ + UINT8 Ch1_Bit_swizzling[32]; + +/** Offset 0x00C6 - Ch2_Bit_swizzling + Channel 2 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. +**/ + UINT8 Ch2_Bit_swizzling[32]; + +/** Offset 0x00E6 - Ch3_Bit_swizzling + Channel 3 PHY to DUnit DQ mapping (only used if not 1-1 mapping)Range: 0-32. +**/ + UINT8 Ch3_Bit_swizzling[32]; + +/** Offset 0x0106 - RmtMarginCheckScaleHighThreshold + RmtMarginCheckScaleHighThreshold. 0x0000(Default). +**/ + UINT16 RmtMarginCheckScaleHighThreshold; + +/** Offset 0x0108 - MsgLevelMask + MsgLevelMask. 0x00000000(Default). +**/ + UINT32 MsgLevelMask; + +/** Offset 0x010C +**/ + UINT32 UnusedUpdSpace0; + +/** Offset 0x0110 - PreMem GPIO Table Entry Number. Currently maximum entry number is 4 + Number of Entries in PreMem GPIO Table. 0(Default). +**/ + UINT8 PreMemGpioTableEntryNum; + +/** Offset 0x0111 - PreMem GPIO Pin Number for each table + Number of Pins in each PreMem GPIO Table. 0(Default). +**/ + UINT8 PreMemGpioTablePinNum[4]; + +/** Offset 0x0115 - PreMem GPIO Table Pointer + Pointer to Array of pointers to PreMem GPIO Table. 0x00000000(Default). +**/ + UINT32 PreMemGpioTablePtr; + +/** Offset 0x0119 - Enhance the port 8xh decoding + Enable/Disable Enhance the port 8xh decoding. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 EnhancePort8xhDecoding; + +/** Offset 0x011A - OEM File Loading Address + Determine the memory base address to load a specified file from CSE file system + after memory is available. +**/ + UINT32 OemLoadingBase; + +/** Offset 0x011E - OEM File Name to Load + Specify a file name to load from CSE file system after memory is available. Empty + indicates no file needs to be loaded. +**/ + UINT8 OemFileName[16]; + +/** Offset 0x012E - SPD Data Write + Enable/Disable SPD data write on the SMBUS. 0x00:Disable(Default), 0x01:Enable. + $EN_DIS +**/ + UINT8 SpdWriteEnable; + +/** Offset 0x012F - MRC Training Data Saving + Enable/Disable MRC training data saving in FSP. 0x00:Disable(Default), 0x01:Enable. + $EN_DIS +**/ + UINT8 MrcDataSaving; + +/** Offset 0x0130 - eMMC Trace Length + Select eMMC trace length to load OEM file from when loading OEM file name is specified. + 0x0:Long(Default), 0x1:Short. + 0x0:Long, 0x1:Short +**/ + UINT8 eMMCTraceLen; + +/** Offset 0x0131 +**/ + VOID* MrcBootDataPtr; + +/** Offset 0x0135 - Skip CSE RBP to support zero sized IBB + Enable/Disable skip CSE RBP for bootloader which loads IBB without assistance of + CSE. 0x00:Disable(Default), 0x01:Enable. + $EN_DIS +**/ + UINT8 SkipCseRbp; + +/** Offset 0x0136 - Npk Enable + Enable/Disable Npk. 0:Disable, 1:Enable, 2:Debugger, 3:Auto(Default). + 0:Disable, 1:Enable, 2:Debugger, 3:Auto +**/ + UINT8 NpkEn; + +/** Offset 0x0137 - FW Trace Enable + Enable/Disable FW Trace. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 FwTraceEn; + +/** Offset 0x0138 - FW Trace Destination + FW Trace Destination. 1-NPK_TRACE_TO_MEMORY, 2-NPK_TRACE_TO_DCI, 3-NPK_TRACE_TO_BSSB, + 4-NPK_TRACE_TO_PTI(Default). +**/ + UINT8 FwTraceDestination; + +/** Offset 0x0139 - NPK Recovery Dump + Enable/Disable NPK Recovery Dump. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 RecoverDump; + +/** Offset 0x013A - Memory Region 0 Buffer WrapAround + Memory Region 0 Buffer WrapAround. 0-n0-warp, 1-warp(Default). +**/ + UINT8 Msc0Wrap; + +/** Offset 0x013B - Memory Region 1 Buffer WrapAround + Memory Region 1 Buffer WrapAround. 0-n0-warp, 1-warp(Default). +**/ + UINT8 Msc1Wrap; + +/** Offset 0x013C - Memory Region 0 Buffer Size + Memory Region 0 Buffer Size. 0-0MB(Default), 1-1MB, 2-8MB, 3-64MB, 4-128MB, 5-256MB, + 6-512MB, 7-1GB. +**/ + UINT32 Msc0Size; + +/** Offset 0x0140 - Memory Region 1 Buffer Size + Memory Region 1 Buffer Size, 0-0MB(Default), 1-1MB, 2-8MB, 3-64MB, 4-128MB, 5-256MB, + 6-512MB, 7-1GB. +**/ + UINT32 Msc1Size; + +/** Offset 0x0144 - PTI Mode + PTI Mode. 0-0ff, 1-x4(Default), 2-x8, 3-x12, 4-x16. +**/ + UINT8 PtiMode; + +/** Offset 0x0145 - PTI Training + PTI Training. 0-off(Default), 1-6=1-6. +**/ + UINT8 PtiTraining; + +/** Offset 0x0146 - PTI Speed + PTI Speed. 0-full, 1-half, 2-quarter(Default). +**/ + UINT8 PtiSpeed; + +/** Offset 0x0147 - Punit Message Level + Punit Message Output Verbosity Level. 0, 1(Default), 2-4=2-4. +**/ + UINT8 PunitMlvl; + +/** Offset 0x0148 - PMC Message Level + PMC Message Output Verbosity Level. 0, 1(Default), 2-4=2-4. +**/ + UINT8 PmcMlvl; + +/** Offset 0x0149 - SW Trace Enable + Enable/Disable SW Trace. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 SwTraceEn; + +/** Offset 0x014A - Periodic Retraining Disable + Option to disable LPDDR4 Periodic Retraining. 0x00:Disable(Default), 0x01:Enable. + $EN_DIS +**/ + UINT8 PeriodicRetrainingDisable; + +/** Offset 0x014B +**/ + UINT8 ReservedFspmUpd[5]; +} FSP_M_CONFIG; + +/** Fsp M Test Configuration +**/ +typedef struct { + +/** Offset 0x0150 +**/ + UINT32 Signature; + +/** Offset 0x0154 +**/ + UINT8 ReservedFspmTestUpd[28]; +} FSP_M_TEST_CONFIG; + +/** Fsp M Restricted Configuration +**/ +typedef struct { + +/** Offset 0x0170 +**/ + UINT32 Signature; + +/** Offset 0x0174 +**/ + UINT8 ReservedFspmRestrictedUpd[138]; +} FSP_M_RESTRICTED_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0150 +**/ + FSP_M_TEST_CONFIG FspmTestConfig; + +/** Offset 0x0170 +**/ + FSP_M_RESTRICTED_CONFIG FspmRestrictedConfig; + +/** Offset 0x01FE +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack(pop) + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspsUpd.h new file mode 100644 index 0000000000..553eba3f18 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/apollolake/FspsUpd.h @@ -0,0 +1,1541 @@ +/** @file + +Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(push, 1) + + +/** Fsp S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - ActiveProcessorCores + Number of active cores. 0:Disable(Default), 1:Enable. +**/ + UINT8 ActiveProcessorCores; + +/** Offset 0x0021 - Disable Core1 + Disable/Enable Core1. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 DisableCore1; + +/** Offset 0x0022 - Disable Core2 + Disable/Enable Core2. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 DisableCore2; + +/** Offset 0x0023 - Disable Core3 + Disable/Enable Core3. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 DisableCore3; + +/** Offset 0x0024 - VMX Enable + Enable or Disable VMX. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x0025 - Memory region allocation for Processor Trace + Memory region allocation for Processor Trace, allowed range is from 4K (0x0) to + 128MB (0xF); <b>0xFF: Disable. 0xFF:Disable(Default) +**/ + UINT8 ProcTraceMemSize; + +/** Offset 0x0026 - Enable Processor Trace + Enable or Disable Processor Trace feature. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 ProcTraceEnable; + +/** Offset 0x0027 - Eist + Enable or Disable Intel SpeedStep Technology. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x0028 - Boot PState + Boot PState with HFM or LFM. 0:HFM(Default), 1:LFM. +**/ + UINT8 BootPState; + +/** Offset 0x0029 - CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 EnableCx; + +/** Offset 0x002A - Enhanced C-states + Enable or Disable Enhanced C-states. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x002B - Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x002C - Max Pkg Cstate + Max Pkg Cstate. 0:PkgC0C1, 1:PkgC2, 2:PkgC3(Default), 3:PkgC6, 4:PkgC7, 5:PkgC7s, + 6:PkgC8, 7:PkgC9, 8:PkgC10, 9:PkgCMax, 254:PkgCpuDefault, 255:PkgAuto. +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x002D +**/ + UINT8 UnusedUpdSpace0; + +/** Offset 0x002E - C-State auto-demotion + C-State Auto Demotion. 0:Disable(Default) C1 and C3 Auto-demotion, 1:Enable C3/C6/C7 + Auto-demotion to C1, 2:Enable C6/C7 Auto-demotion to C3, 3:Enable C6/C7 Auto-demotion + to C1 and C3. +**/ + UINT8 CStateAutoDemotion; + +/** Offset 0x002F - C-State un-demotion + C-State un-demotion. 0:Disable(Default) C1 and C3 Un-demotion, 1:Enable C1 Un-demotion, + 2:Enable C3 Un-demotion, 3:Enable C1 and C3 Un-demotion. +**/ + UINT8 CStateUnDemotion; + +/** Offset 0x0030 - Max Core C-State + Max Core C-State. 0:Unlimited, 1:C1, 2:C3, 3:C6, 4:C7, 5:C8, 6:C9, 7:C10, 8:CCx(Default). +**/ + UINT8 MaxCoreCState; + +/** Offset 0x0031 - Package C-State Demotion + Enable or Disable Package Cstate Demotion. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x0032 - Package C-State Un-demotion + Enable or Disable Package Cstate UnDemotion. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x0033 - Turbo Mode + Enable or Disable long duration Turbo Mode. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x0034 - SC HDA Verb Table Entry Number + Number of Entries in Verb Table. 0(Default). +**/ + UINT8 HdaVerbTableEntryNum; + +/** Offset 0x0035 - SC HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. 0x00000000(Default). +**/ + UINT32 HdaVerbTablePtr; + +/** Offset 0x0039 - Enable/Disable P2SB device hidden. + Enable/Disable P2SB device hidden. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 P2sbUnhide; + +/** Offset 0x003A - IPU Enable/Disable + Enable/Disable IPU Device. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 IpuEn; + +/** Offset 0x003B - IMGU ACPI mode selection + 0:Auto, 1:IGFX Child device(Default), 2:ACPI device. + 0:Disable, 1:IGFX Child device, 2:ACPI device +**/ + UINT8 IpuAcpiMode; + +/** Offset 0x003C - GttMmAdr + GttMmAdr structure for initialization. 0xBF000000(Default). +**/ + UINT32 GttMmAdr; + +/** Offset 0x0040 - GmAdr + GmAdr structure for initialization. 0xA0000000(Default). +**/ + UINT32 GmAdr; + +/** Offset 0x0044 - Enable ForceWake + Enable/disable ForceWake Models. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 ForceWake; + +/** Offset 0x0045 - Enable PavpLock + Enable/disable PavpLock. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 PavpLock; + +/** Offset 0x0046 - Enable GraphicsFreqModify + Enable/disable GraphicsFreqModify. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 GraphicsFreqModify; + +/** Offset 0x0047 - Enable GraphicsFreqReq + Enable/disable GraphicsFreqReq. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 GraphicsFreqReq; + +/** Offset 0x0048 - Enable GraphicsVideoFreq + Enable/disable GraphicsVideoFreq. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 GraphicsVideoFreq; + +/** Offset 0x0049 - Enable PmLock + Enable/disable PmLock. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 PmLock; + +/** Offset 0x004A - Enable DopClockGating + Enable/disable DopClockGating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 DopClockGating; + +/** Offset 0x004B - Enable UnsolicitedAttackOverride + Enable/disable UnsolicitedAttackOverride. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 UnsolicitedAttackOverride; + +/** Offset 0x004C - Enable WOPCMSupport + Enable/disable WOPCMSupport. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 WOPCMSupport; + +/** Offset 0x004D - Enable WOPCMSize + Enable/disable WOPCMSize. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 WOPCMSize; + +/** Offset 0x004E - Enable PowerGating + Enable/disable PowerGating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 PowerGating; + +/** Offset 0x004F - Enable UnitLevelClockGating + Enable/disable UnitLevelClockGating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 UnitLevelClockGating; + +/** Offset 0x0050 - Enable FastBoot + Enable/disable FastBoot. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 FastBoot; + +/** Offset 0x0051 - Enable DynSR + Enable/disable DynSR. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 DynSR; + +/** Offset 0x0052 - Enable SaIpuEnable + Enable/disable SaIpuEnable. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x0053 - BMP Logo Data Size + BMP logo data buffer size. 0x00000000(Default). +**/ + UINT32 LogoSize; + +/** Offset 0x0057 - BMP Logo Data Pointer + BMP logo data pointer to a BMP format buffer. 0x00000000(Default). +**/ + UINT32 LogoPtr; + +/** Offset 0x005B - Graphics Configuration Data Pointer + Graphics configuration data used for initialization. 0x00000000(Default). +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x005F - GT PM Support + Enable/Disable GT power management support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x0060 - RC6(Render Standby) + Enable/Disable render standby support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 EnableRenderStandby; + +/** Offset 0x0061 - PAVP Enable + Enable/Disable Protected Audio Visual Path (PAVP). 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x0062 - PAVP PR3 + Enable/Disable PAVP PR3 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 PavpPr3; + +/** Offset 0x0063 - CdClock Frequency selection + 0:144MHz, 1:288MHz, 2:384MHz, 3:576MHz, 4:624MHz(Default). + 0: 144 MHz, 1: 288 MHz, 2: 384 MHz, 3: 576 MHz, 4: 624 MHz +**/ + UINT8 CdClock; + +/** Offset 0x0064 - Enable/Disable PeiGraphicsPeimInit + Enable/Disable PeiGraphicsPeimInit 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x0065 - Write Protection Support + Enable/disable Write Protection. 0:Disable, 1:Enable(Default). +**/ + UINT8 WriteProtectionEnable[5]; + +/** Offset 0x006A - Read Protection Support + Enable/disable Read Protection. 0:Disable, 1:Enable(Default). +**/ + UINT8 ReadProtectionEnable[5]; + +/** Offset 0x006F - Protected Range Limitation + The address of the upper limit of protection, 0x0FFFh(Default). +**/ + UINT16 ProtectedRangeLimit[5]; + +/** Offset 0x0079 - Protected Range Base + The base address of the upper limit of protection. 0x0000(Default). +**/ + UINT16 ProtectedRangeBase[5]; + +/** Offset 0x0083 - Enable SC Gaussian Mixture Models + Enable/disable SC Gaussian Mixture Models. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 Gmm; + +/** Offset 0x0084 - GMM Clock Gating - PGCB Clock Trunk + Enable/disable PGCB Clock Trunk. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingPgcbClkTrunk; + +/** Offset 0x0085 - GMM Clock Gating - Sideband + Enable/disable Sideband. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingSb; + +/** Offset 0x0086 - GMM Clock Gating - Sideband + Enable/disable Sideband. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingSbClkTrunk; + +/** Offset 0x0087 - GMM Clock Gating - Sideband Clock Partition + Enable/disable Sideband Clock Partition. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingSbClkPartition; + +/** Offset 0x0088 - GMM Clock Gating - Core + Enable/disable Core. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingCore; + +/** Offset 0x0089 - GMM Clock Gating - DMA + Enable/disable DMA. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingDma; + +/** Offset 0x008A - GMM Clock Gating - Register Access + Enable/disable Register Access. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingRegAccess; + +/** Offset 0x008B - GMM Clock Gating - Host + Enable/disable Host. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingHost; + +/** Offset 0x008C - GMM Clock Gating - Partition + Enable/disable Partition. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingPartition; + +/** Offset 0x008D - Clock Gating - Trunk + Enable/disable Trunk. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ClkGatingTrunk; + +/** Offset 0x008E - HD Audio Support + Enable/disable HDA Audio Feature. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 HdaEnable; + +/** Offset 0x008F - HD Audio DSP Support + Enable/disable HDA Audio DSP Feature. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 DspEnable; + +/** Offset 0x0090 - Azalia wake-on-ring + Enable/disable Azalia wake-on-ring. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 Pme; + +/** Offset 0x0091 - HD-Audio I/O Buffer Ownership + Set HD-Audio I/O Buffer Ownership. 0:HD-Audio link owns all the I/O buffers(Default) + 0:HD-Audio link owns all the I/O buffers, 1:HD-Audio link owns 4 I/O buffers and + I2S port owns 4 I/O buffers, 3:I2S port owns all the I/O buffers +**/ + UINT8 HdAudioIoBufferOwnership; + +/** Offset 0x0092 - HD-Audio I/O Buffer Voltage + HD-Audio I/O Buffer Voltage Mode Selectiton . 0:3.3V(Default), 1:1.8V. + 0: 3.3V, 1: 1.8V +**/ + UINT8 HdAudioIoBufferVoltage; + +/** Offset 0x0093 - HD-Audio Virtual Channel Type + HD-Audio Virtual Channel Type Selectiton. 0:VC0(Default), 1:VC1. + 0: VC0, 1: VC1 +**/ + UINT8 HdAudioVcType; + +/** Offset 0x0094 - HD-Audio Link Frequency + HD-Audio Virtual Channel Type Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, + 4:96MHz, 5:Invalid. + 0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid +**/ + UINT8 HdAudioLinkFrequency; + +/** Offset 0x0095 - HD-Audio iDisp-Link Frequency + HD-Audio iDisp-Link Frequency Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, + 4:96MHz, 5:Invalid. + 0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid +**/ + UINT8 HdAudioIDispLinkFrequency; + +/** Offset 0x0096 - HD-Audio iDisp-Link T-Mode + HD-Audio iDisp-Link T-Mode Selectiton. 0:2T(Default), 1:1T. + 0: 2T, 1: 1T +**/ + UINT8 HdAudioIDispLinkTmode; + +/** Offset 0x0097 - HD-Audio Disp DMIC + HD-Audio Disp DMIC Selectiton. 0:Disable, 1:2ch array(Default), 2:4ch array. + 0: Disable, 1: 2ch array, 2: 4ch array +**/ + UINT8 DspEndpointDmic; + +/** Offset 0x0098 - HD-Audio Bluetooth + Enable/Disable HD-Audio bluetooth. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 DspEndpointBluetooth; + +/** Offset 0x0099 - HD-Audio I2S SHK + Enable/Disable HD-Audio I2S SHK. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 DspEndpointI2sSkp; + +/** Offset 0x009A - HD-Audio I2S HP + Enable/Disable HD-Audio I2S HP. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 DspEndpointI2sHp; + +/** Offset 0x009B - HD-Audio Controller Power Gating + Enable/Disable HD-Audio Controller Power Gating. This option is deprecated. + $EN_DIS +**/ + UINT8 AudioCtlPwrGate; + +/** Offset 0x009C - HD-Audio ADSP Power Gating + Enable/Disable HD-Audio ADSP Power Gating. This option is deprecated. + $EN_DIS +**/ + UINT8 AudioDspPwrGate; + +/** Offset 0x009D - HD-Audio CSME Memory Transfers + Enable/Disable HD-Audio CSME Memory Transfers. 0:VC0(Default), 1:VC2. + 0: VC0, 1: VC2 +**/ + UINT8 Mmt; + +/** Offset 0x009E - HD-Audio Host Memory Transfers + Enable/Disable HD-Audio Host Memory Transfers. 0:VC0(Default), 1:VC2. + 0: VC0, 1: VC2 +**/ + UINT8 Hmt; + +/** Offset 0x009F - HD-Audio BIOS Configuration Lock Down + Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 BiosCfgLockDown; + +/** Offset 0x00A0 - HD-Audio Power Gating + Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 HDAudioPwrGate; + +/** Offset 0x00A1 - HD-Audio Clock Gatingn + Enable/Disable HD-Audio Clock Gating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 HDAudioClkGate; + +/** Offset 0x00A2 - Bitmask of DSP Feature + Set Bitmask of HD-Audio DSP Feature. 0x00000000(Default). + [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] + - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: + Intel WoV, 1: Windows Voice Activation +**/ + UINT32 DspFeatureMask; + +/** Offset 0x00A6 - Bitmask of supported DSP Post-Processing Modules + Set HD-Audio Bitmask of supported DSP Post-Processing Modules. 0x00000000(Default). + [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] + - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: + Intel WoV, 1: Windows Voice Activation +**/ + UINT32 DspPpModuleMask; + +/** Offset 0x00AA - Enable High Precision Timer + Enable/Disable Hpet. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 Hpet; + +/** Offset 0x00AB - Hpet Valid BDF Value + Enable/Disable Hpet Valid BDF Value. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 HpetBdfValid; + +/** Offset 0x00AC - Bus Number of Hpet + Completer ID of Bus Number of Hpet. Default = 0xFA(Default). +**/ + UINT8 HpetBusNumber; + +/** Offset 0x00AD - Device Number of Hpet + Completer ID of Device Number of Hpet. 0x1F(Default). +**/ + UINT8 HpetDeviceNumber; + +/** Offset 0x00AE - Function Number of Hpet + Completer ID of Function Number of Hpet. 0x00(Default). +**/ + UINT8 HpetFunctionNumber; + +/** Offset 0x00AF +**/ + UINT32 UnusedUpdSpace1; + +/** Offset 0x00B3 - IoApic Valid BDF Value + Enable/Disable IoApic Valid BDF Value. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 IoApicBdfValid; + +/** Offset 0x00B4 - Bus Number of IoApic + Completer ID of Bus Number of IoApic. 0xFA(Default). +**/ + UINT8 IoApicBusNumber; + +/** Offset 0x00B5 - Device Number of IoApic + Completer ID of Device Number of IoApic. 0x0F(Default). +**/ + UINT8 IoApicDeviceNumber; + +/** Offset 0x00B6 - Function Number of IoApic + Completer ID of Function Number of IoApic. 0x00(Default). +**/ + UINT8 IoApicFunctionNumber; + +/** Offset 0x00B7 - IOAPIC Entry 24-119 + Enable/Disable IOAPIC Entry 24-119. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 IoApicEntry24_119; + +/** Offset 0x00B8 - IO APIC ID + This member determines IOAPIC ID. 0x01(Default). +**/ + UINT8 IoApicId; + +/** Offset 0x00B9 - IoApic Range + Define address bits 19:12 for the IOxAPIC range. 0x00(Default). +**/ + UINT8 IoApicRangeSelect; + +/** Offset 0x00BA - ISH Controller + Enable/Disable ISH Controller. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 IshEnable; + +/** Offset 0x00BB - BIOS Interface Lock Down + Enable/Disable BIOS Interface Lock Down bit to prevent writes to the Backup Control + Register. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 BiosInterface; + +/** Offset 0x00BC - Bios LockDown Enable + Enable the BIOS Lock Enable (BLE) feature and set EISS bit. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 BiosLock; + +/** Offset 0x00BD - SPI EISS Status + Enable/Disable InSMM.STS (EISS) in SPI. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 SpiEiss; + +/** Offset 0x00BE - BiosLock SWSMI Number + This member describes the SwSmi value for Bios Lock. 0xA9(Default). +**/ + UINT8 BiosLockSwSmiNumber; + +/** Offset 0x00BF - LPSS IOSF PMCTL S0ix Enable + Enable/Disable LPSS IOSF Bridge PMCTL Register S0ix Bits. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 LPSS_S0ixEnable; + +/** Offset 0x00C0 - LPSS I2C Clock Gating Configuration + Enable/Disable LPSS I2C Clock Gating. 0:Disable, 1:Enable(Default). +**/ + UINT8 I2cClkGateCfg[8]; + +/** Offset 0x00C8 - PSS HSUART Clock Gating Configuration + Enable/Disable LPSS HSUART Clock Gating. 0:Disable, 1:Enable(Default). +**/ + UINT8 HsuartClkGateCfg[4]; + +/** Offset 0x00CC - LPSS SPI Clock Gating Configuration + Enable/Disable LPSS SPI Clock Gating. 0:Disable, 1:Enable(Default). +**/ + UINT8 SpiClkGateCfg[3]; + +/** Offset 0x00CF - I2C Device 0 + Enable/Disable I2C Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 I2c0Enable; + +/** Offset 0x00D0 - I2C Device 1 + Enable/Disable I2C Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 I2c1Enable; + +/** Offset 0x00D1 - I2C Device 2 + Enable/Disable I2C Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 I2c2Enable; + +/** Offset 0x00D2 - I2C Device 3 + Enable/Disable I2C Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 I2c3Enable; + +/** Offset 0x00D3 - I2C Device 4 + Enable/Disable I2C Device 4. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 I2c4Enable; + +/** Offset 0x00D4 - I2C Device 5 + Enable/Disable I2C Device 5. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 I2c5Enable; + +/** Offset 0x00D5 - I2C Device 6 + Enable/Disable I2C Device 6. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 I2c6Enable; + +/** Offset 0x00D6 - I2C Device 7 + Enable/Disable I2C Device 7. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 I2c7Enable; + +/** Offset 0x00D7 - UART Device 0 + Enable/Disable UART Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 Hsuart0Enable; + +/** Offset 0x00D8 - UART Device 1 + Enable/Disable UART Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 Hsuart1Enable; + +/** Offset 0x00D9 - UART Device 2 + Enable/Disable UART Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 Hsuart2Enable; + +/** Offset 0x00DA - UART Device 3 + Enable/Disable UART Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 Hsuart3Enable; + +/** Offset 0x00DB - SPI UART Device 0 + Enable/Disable SPI Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 Spi0Enable; + +/** Offset 0x00DC - SPI UART Device 1 + Enable/Disable SPI Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 Spi1Enable; + +/** Offset 0x00DD - SPI UART Device 2 + Enable/Disable SPI Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode. + 0: Disabled, 1: PCI Mode, 2: ACPI Mode +**/ + UINT8 Spi2Enable; + +/** Offset 0x00DE - UART Debug Base Address + UART Debug Base Address. 0x00000000(Default). +**/ + UINT32 Uart2KernelDebugBaseAddress; + +/** Offset 0x00E2 - OS Debug Feature + Enable/Disable OS Debug Feature. 0:Disable(Default), 1: Enable. + $EN_DIS +**/ + UINT8 OsDbgEnable; + +/** Offset 0x00E3 - DCI Feature + Enable/Disable DCI Feature. 0:Disable(Default), 1: Enable. + $EN_DIS +**/ + UINT8 DciEn; + +/** Offset 0x00E4 - Enable PCIE Clock Gating + Enable/disable PCIE Clock Gating. 0:Enable, 1:Disable(Default). + 0:Enable, 1:Disable +**/ + UINT8 PcieClockGatingDisabled; + +/** Offset 0x00E5 - Enable PCIE Root Port 8xh Decode + Enable/disable PCIE Root Port 8xh Decode. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 PcieRootPort8xhDecode; + +/** Offset 0x00E6 - PCIE 8xh Decode Port Index + PCIE 8xh Decode Port Index. 0x00(Default). +**/ + UINT8 Pcie8xhDecodePortIndex; + +/** Offset 0x00E7 - Enable PCIE Root Port Peer Memory Write + Enable/disable PCIE root port peer memory write. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 PcieRootPortPeerMemoryWriteEnable; + +/** Offset 0x00E8 - PCIE SWSMI Number + This member describes the SwSmi value for override PCIe ASPM table. 0xAA(Default). +**/ + UINT8 PcieAspmSwSmiNumber; + +/** Offset 0x00E9 - PCI Express Root Port + Control the PCI Express Root Port . 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRootPortEn[6]; + +/** Offset 0x00EF - Hide PCIE Root Port Configuration Space + Enable/disable Hide PCIE Root Port Configuration Space. 0:Disable(Default), 1:Enable. +**/ + UINT8 PcieRpHide[6]; + +/** Offset 0x00F5 - PCIE Root Port Slot Implement + Enable/disable PCIE Root Port Slot Implement. 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRpSlotImplemented[6]; + +/** Offset 0x00FB - Hot Plug + PCI Express Hot Plug Enable/Disable. 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRpHotPlug[6]; + +/** Offset 0x0101 - PCIE PM SCI + Enable/Disable PCI Express PME SCI. 0:Disable(Default), 1:Enable. +**/ + UINT8 PcieRpPmSci[6]; + +/** Offset 0x0107 - PCIE Root Port Extended Sync + Enable/Disable PCIE Root Port Extended Sync. 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRpExtSync[6]; + +/** Offset 0x010D - Transmitter Half Swing + Transmitter Half Swing Enable/Disable. 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRpTransmitterHalfSwing[6]; + +/** Offset 0x0113 - ACS + Enable/Disable Access Control Services Extended Capability. 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRpAcsEnabled[6]; + +/** Offset 0x0119 - Clock Request Support + Enable/Disable CLKREQ# Support. 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRpClkReqSupported[6]; + +/** Offset 0x011F - Configure CLKREQ Number + Configure Root Port CLKREQ Number if CLKREQ is supported. Default=0x04, 0x05, 0x00, + 0x01, 0x02, 0x03. +**/ + UINT8 PcieRpClkReqNumber[6]; + +/** Offset 0x0125 - CLKREQ# Detection + Enable/Disable CLKREQ# Detection Probe. 0: Disable(Default), 1: Enable. +**/ + UINT8 PcieRpClkReqDetect[6]; + +/** Offset 0x012B - Advanced Error Reporting + Enable/Disable Advanced Error Reporting. 0: Disable(Default), 1: Enable. +**/ + UINT8 AdvancedErrorReporting[6]; + +/** Offset 0x0131 - PME Interrupt + Enable/Disable PME Interrupt. 0: Disable(Default), 1: Enable. +**/ + UINT8 PmeInterrupt[6]; + +/** Offset 0x0137 - URR + PCI Express Unsupported Request Reporting Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + UINT8 UnsupportedRequestReport[6]; + +/** Offset 0x013D - FER + PCI Express Device Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + UINT8 FatalErrorReport[6]; + +/** Offset 0x0143 - NFER + PCI Express Device Non-Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + UINT8 NoFatalErrorReport[6]; + +/** Offset 0x0149 - CER + PCI Express Device Correctable Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + UINT8 CorrectableErrorReport[6]; + +/** Offset 0x014F - SEFE + Root PCI Express System Error on Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + UINT8 SystemErrorOnFatalError[6]; + +/** Offset 0x0155 - SENFE + Root PCI Express System Error on Non-Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + UINT8 SystemErrorOnNonFatalError[6]; + +/** Offset 0x015B - SECE + Root PCI Express System Error on Correctable Error Enable/Disable. 0:Disable(Default), 1:Enable. +**/ + UINT8 SystemErrorOnCorrectableError[6]; + +/** Offset 0x0161 - PCIe Speed + Configure PCIe Speed. 0:Auto(Default), 1:Gen1, 2:Gen2, 3:Gen3. +**/ + UINT8 PcieRpSpeed[6]; + +/** Offset 0x0167 - Physical Slot Number + Physical Slot Number for PCIE Root Port. Default=0x00, 0x01, 0x02, 0x03, 0x04, 0x05. +**/ + UINT8 PhysicalSlotNumber[6]; + +/** Offset 0x016D - CTO + Enable/Disable PCI Express Completion Timer TO . 0:Disable(Default), 1:Enable. +**/ + UINT8 PcieRpCompletionTimeout[6]; + +/** Offset 0x0173 - PTM Support + Enable/Disable PTM Support. 0:Disable(Default), 1:Enable. +**/ + UINT8 PtmEnable[6]; + +/** Offset 0x0179 - ASPM + PCI Express Active State Power Management settings. 0:Disable, 1:L0s, 2:L1, 3:L0sL1, + 4:Auto(Default). +**/ + UINT8 PcieRpAspm[6]; + +/** Offset 0x017F - L1 Substates + PCI Express L1 Substates settings. 0:Disable, 1:L1.1, 2:L1.2, 3:L1.1 & L1.2(Default). +**/ + UINT8 PcieRpL1Substates[6]; + +/** Offset 0x0185 - PCH PCIe LTR + PCH PCIE Latency Reporting Enable/Disable. 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRpLtrEnable[6]; + +/** Offset 0x018B - PCIE LTR Lock + PCIE LTR Configuration Lock. 0:Disable(Default), 1:Enable. +**/ + UINT8 PcieRpLtrConfigLock[6]; + +/** Offset 0x0191 - PME_B0_S5 Disable bit + PME_B0_S5_DIS bit in the General PM Configuration B (GEN_PMCON_B) register. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 PmeB0S5Dis; + +/** Offset 0x0192 - PCI Clock Run + This member describes whether or not the PCI ClockRun feature of SC should be enabled. + 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 PciClockRun; + +/** Offset 0x0193 - Enable/Disable Timer 8254 Clock Setting + Enable/Disable Timer 8254 Clock. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 Timer8254ClkSetting; + +/** Offset 0x0194 - Chipset SATA + Enables or Disables the Chipset SATA Controller. The Chipset SATA controller supports + the 2 black internal SATA ports (up to 3Gb/s supported per port). 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 EnableSata; + +/** Offset 0x0195 - SATA Mode Selection + Determines how SATA controller(s) operate. 0:AHCI(Default), 1:RAID. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x0196 - Aggressive LPM Support + Enable PCH to aggressively enter link power state. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x0197 - SATA Power Optimization + Enable SATA Power Optimizer on SC side. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x0198 - eSATA Speed Limit + Enable/Disable eSATA Speed Limit. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 eSATASpeedLimit; + +/** Offset 0x0199 - SATA Speed Limit + SATA Speed Limit. 0h:ScSataSpeed(Default), 1h:1.5Gb/s(Gen 1), 2h:3Gb/s(Gen 2), 3h:6Gb/s(Gen 3). + 0:Default, 1: 1.5 Gb/s (Gen 1), 2: 3 Gb/s(Gen 2), 3: 6 Gb/s (Gen 1) +**/ + UINT8 SpeedLimit; + +/** Offset 0x019A - SATA Port + Enable or Disable SATA Port. 0:Disable, 1:Enable(Default). +**/ + UINT8 SataPortsEnable[2]; + +/** Offset 0x019C - SATA Port DevSlp + Enable/Disable SATA Port DevSlp. Board rework for LP needed before enable. 0:Disable(Default), 1:Enable. +**/ + UINT8 SataPortsDevSlp[2]; + +/** Offset 0x019E - SATA Port HotPlug + Enable/Disable SATA Port Hotplug . 0:Disable(Default), 1:Enable. +**/ + UINT8 SataPortsHotPlug[2]; + +/** Offset 0x01A0 - Mechanical Presence Switch + Controls reporting if this port has an Mechanical Presence Switch.\n + Note:Requires hardware support. 0:Disable, 1:Enable(Default). +**/ + UINT8 SataPortsInterlockSw[2]; + +/** Offset 0x01A2 - External SATA Ports + Enable/Disable External SATA Ports. 0:Disable(Default), 1:Enable. +**/ + UINT8 SataPortsExternal[2]; + +/** Offset 0x01A4 - Spin Up Device + Enable/Disable device spin up at boot on selected Sata Ports. 0:Disable(Default), 1:Enable. +**/ + UINT8 SataPortsSpinUp[2]; + +/** Offset 0x01A6 - SATA Solid State + Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. 0:Hard + Disk Drive(Default), 1:Solid State Drive. +**/ + UINT8 SataPortsSolidStateDrive[2]; + +/** Offset 0x01A8 - DITO Configuration + Enable/Disable DITO Configuration. 0:Disable(Default), 1:Enable. +**/ + UINT8 SataPortsEnableDitoConfig[2]; + +/** Offset 0x01AA - DM Value + DM Value. 0:Minimum, 0x0F:Maximum(Default). +**/ + UINT8 SataPortsDmVal[2]; + +/** Offset 0x01AC - DITO Value + DEVSLP Idle Timeout Value. 0:Minimum, 0x03FF:Maximum, 0x0271(Default). +**/ + UINT16 SataPortsDitoVal[2]; + +/** Offset 0x01B0 - Subsystem Vendor ID + Subsystem Vendor ID. 0x8086(Default). +**/ + UINT16 SubSystemVendorId; + +/** Offset 0x01B2 - Subsystem ID + Subsystem ID. 0x7270(Default). +**/ + UINT16 SubSystemId; + +/** Offset 0x01B4 +**/ + UINT8 UnusedUpdSpace2[10]; + +/** Offset 0x01BE - CRIDSettings + PMC CRID setting. 0:Disable(Default), 1:CRID_1, 2:CRID_2, 3:CRID_3. +**/ + UINT8 CRIDSettings; + +/** Offset 0x01BF - ResetSelect + ResetSelect. 0x6:warm reset(Default), 0xE:cold reset. +**/ + UINT8 ResetSelect; + +/** Offset 0x01C0 - SD Card Support (D27:F0) + Enable/Disable SD Card Support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 SdcardEnabled; + +/** Offset 0x01C1 - SeMMC Support (D28:F0) + Enable/Disable eMMC Support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 eMMCEnabled; + +/** Offset 0x01C2 - eMMC Max Speed + Select the eMMC max Speed allowed. 0:HS400(Default), 1:HS200, 2:DDR50. + 0:HS400, 1: HS200, 2:DDR50 +**/ + UINT8 eMMCHostMaxSpeed; + +/** Offset 0x01C3 - UFS Support (D29:F0) + Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 UfsEnabled; + +/** Offset 0x01C4 - SDIO Support (D30:F0) + Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 SdioEnabled; + +/** Offset 0x01C5 - GPP Lock Feature + Enable/Disable GPP lock. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 GppLock; + +/** Offset 0x01C6 - Serial IRQ + Enable/Disable Serial IRQ. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 SirqEnable; + +/** Offset 0x01C7 - Serial IRQ Mode + Serial IRQ Mode Selection. 0:Quiet mode(Default), 1:Continuous mode. + $EN_DIS +**/ + UINT8 SirqMode; + +/** Offset 0x01C8 - Start Frame Pulse Width + Start Frame Pulse Width Value. 0:ScSfpw4Clk(Default), 1: ScSfpw6Clk, 2:ScSfpw8Clk. + 0:ScSfpw4Clk, 1:ScSfpw6Clk, 2:ScSfpw8Clk +**/ + UINT8 StartFramePulse; + +/** Offset 0x01C9 - Enable SMBus + Enable/disable SMBus controller. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x01CA - SMBus ARP Support + Enable/disable SMBus ARP Support. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 ArpEnable; + +/** Offset 0x01CB +**/ + UINT16 UnusedUpdSpace3; + +/** Offset 0x01CD - SMBus Table Elements + The number of elements in the Reserved SMBus Address Table. 0x0080(Default). +**/ + UINT16 NumRsvdSmbusAddresses; + +/** Offset 0x01CF - Reserved SMBus Address Table + Array of addresses reserved for non-ARP-capable SMBus devices. 0x00(Default). +**/ + UINT8 RsvdSmbusAddressTable[128]; + +/** Offset 0x024F - XHCI Disable Compliance Mode + Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance + Mode. Set TRUE to disable Compliance Mode. 0:FALSE(Default), 1:True. + $EN_DIS +**/ + UINT8 DisableComplianceMode; + +/** Offset 0x0250 - USB Per-Port Control + Control each of the USB ports enable/disable. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 UsbPerPortCtl; + +/** Offset 0x0251 - xHCI Mode + Mode of operation of xHCI controller. 0:Disable, 1:Enable, 2:Auto(Default) + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Usb30Mode; + +/** Offset 0x0252 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. 0x01(Default). +**/ + UINT8 PortUsb20Enable[8]; + +/** Offset 0x025A - USB20 Over Current Pin + Over Current Pin number of USB 2.0 Port. 0x00(Default). +**/ + UINT8 PortUs20bOverCurrentPin[8]; + +/** Offset 0x0262 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. 0x01(Default). +**/ + UINT8 PortUsb30Enable[6]; + +/** Offset 0x0268 - USB20 Over Current Pin + Over Current Pin number of USB 3.0 Port. 0x01(Default). +**/ + UINT8 PortUs30bOverCurrentPin[6]; + +/** Offset 0x026E - XDCI Support + Enable/Disable XDCI. 0:Disable, 1:PCI_Mode(Default), 2:ACPI_mode. + 0:Disable, 1:PCI_Mode, 2:ACPI_mode +**/ + UINT8 UsbOtg; + +/** Offset 0x026F - Enable XHCI HSIC Support + Enable/Disable USB HSIC1. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 HsicSupportEnable; + +/** Offset 0x0270 - Enable XHCI SSIC Support + Enable/disable XHCI SSIC ports. One byte for each port, byte0 for port0, byte1 for + port1. 0x00(Default). +**/ + UINT8 SsicPortEnable[2]; + +/** Offset 0x0272 - SSIC Dlane PowerGating + Enable/Disable SSIC Data lane Power Gating. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT16 DlanePwrGating; + +/** Offset 0x0274 - VT-d + Enable/Disable VT-d. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 VtdEnable; + +/** Offset 0x0275 - HDAudio Delay Timer + The delay timer after Azalia reset. 0x012C(Default). +**/ + UINT16 ResetWaitTimer; + +/** Offset 0x0277 - SMI Lock bit + Enable/Disable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. 0:Disable, + 1:Enable(Default). + $EN_DIS +**/ + UINT8 LockDownGlobalSmi; + +/** Offset 0x0278 - RTC Lock Bits + Enable/Disable RTC Lock Bits. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 RtcLock; + +/** Offset 0x0279 - XHCI SSIC RATE + Set XHCI SSIC1 Rate to A Series or B Series. 1:A Series(Default), 2:B Series. +**/ + UINT8 SsicRate[2]; + +/** Offset 0x027B - SATA Test Mode Selection + Enable/Disable SATA Test Mode. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x027C - SMBus Dynamic Power Gating + Enable/Disable SMBus dynamic power gating. 0:Disable(Default), 1:Enable. + $EN_DIS +**/ + UINT16 DynamicPowerGating; + +/** Offset 0x027E - Max Snoop Latency + Latency Tolerance Reporting Max Snoop Latency. 0x0000(Default). +**/ + UINT16 PcieRpLtrMaxSnoopLatency[6]; + +/** Offset 0x028A - Snoop Latency Override + Snoop Latency Override for PCH PCIE. \n + Disabled:Disable override.\n + Manual:Manually enter override values.\n + Auto:Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default). +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[6]; + +/** Offset 0x0290 - Snoop Latency Value + LTR Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[6]; + +/** Offset 0x029C - Snoop Latency Multiplier + LTR Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns, + 4:1048576ns, 5:33554432ns. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[6]; + +/** Offset 0x02A2 - Max Non-Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. 0x0000(Default). +**/ + UINT16 PcieRpLtrMaxNonSnoopLatency[6]; + +/** Offset 0x02AE - Non Snoop Latency Override + Non Snoop Latency Override for PCH PCIE. \n + Disabled:Disable override.\n + Manual:Manually enter override values.\n + Auto: Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default). +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[6]; + +/** Offset 0x02B4 - Non Snoop Latency Value + LTR Non Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default). +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[6]; + +/** Offset 0x02C0 - Non Snoop Latency Multiplier + LTR Non Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), + 3:32768ns, 4:1048576ns, 5:33554432ns. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[6]; + +/** Offset 0x02C6 - PCIE Root Port Slot Power Limit Scale + Specifies scale used for slot power limit value. 0x00(Default). +**/ + UINT8 PcieRpSlotPowerLimitScale[6]; + +/** Offset 0x02CC - PCIE Root Port Slot Power Limit Value + Specifies upper limit on power supplie by slot. 0x00(Default). +**/ + UINT8 PcieRpSlotPowerLimitValue[6]; + +/** Offset 0x02D2 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. 0: Initialize(Default), <b>1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x02D3 - DCI Auto Detect + Enable/disable DCI AUTO mode. Enabled(Default). + $EN_DIS +**/ + UINT8 DciAutoDetect; + +/** Offset 0x02D4 - Halt and Lock TCO Timer + Halt and Lock the TCO Timer (Watchdog). + 0:No, 1:Yes (default) +**/ + UINT8 TcoTimerHaltLock; + +/** Offset 0x02D5 - Power Button Override Period + specifies how long will PMC wait before initiating a global reset. 000b-4s(default), + 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.) + 0x0:4s, 0x1:6s, 0x2:8s, 0x3:10s, 0x4:12s, 0x5:14s +**/ + UINT8 PwrBtnOverridePeriod; + +/** Offset 0x02D6 - Power Button Native Mode Disable + Disable power button native mode, when 1, this will result in the PMC logic constantly + seeing the power button as de-asserted. 0 (default)) + $EN_DIS +**/ + UINT8 DisableNativePowerButton; + +/** Offset 0x02D7 - Power Button Debounce Mode + Enable interrupt when PWRBTN# is asserted. 0:Disabled, 1:Enabled(default) + $EN_DIS +**/ + UINT8 PowerButterDebounceMode; + +/** Offset 0x02D8 - SDIO_TX_CMD_DLL_CNTL + SDIO_TX_CMD_DLL_CNTL. 0x505(Default). +**/ + UINT32 SdioTxCmdCntl; + +/** Offset 0x02DC - SDIO_TX_DATA_DLL_CNTL1 + SDIO_TX_DATA_DLL_CNTL1. 0xE(Default). +**/ + UINT32 SdioTxDataCntl1; + +/** Offset 0x02E0 - SDIO_TX_DATA_DLL_CNTL2 + SDIO_TX_DATA_DLL_CNTL2. 0x22272828(Default). +**/ + UINT32 SdioTxDataCntl2; + +/** Offset 0x02E4 - SDIO_RX_CMD_DATA_DLL_CNTL1 + SDIO_RX_CMD_DATA_DLL_CNTL1. 0x16161616(Default). +**/ + UINT32 SdioRxCmdDataCntl1; + +/** Offset 0x02E8 - SDIO_RX_CMD_DATA_DLL_CNTL2 + SDIO_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default). +**/ + UINT32 SdioRxCmdDataCntl2; + +/** Offset 0x02EC - SDCARD_TX_CMD_DLL_CNTL + SDCARD_TX_CMD_DLL_CNTL. 0x505(Default). +**/ + UINT32 SdcardTxCmdCntl; + +/** Offset 0x02F0 - SDCARD_TX_DATA_DLL_CNTL1 + SDCARD_TX_DATA_DLL_CNTL1. 0xA13(Default). +**/ + UINT32 SdcardTxDataCntl1; + +/** Offset 0x02F4 - SDCARD_TX_DATA_DLL_CNTL2 + SDCARD_TX_DATA_DLL_CNTL2. 0x24242828(Default). +**/ + UINT32 SdcardTxDataCntl2; + +/** Offset 0x02F8 - SDCARD_RX_CMD_DATA_DLL_CNTL1 + SDCARD_RX_CMD_DATA_DLL_CNTL1. 0x73A3637(Default). +**/ + UINT32 SdcardRxCmdDataCntl1; + +/** Offset 0x02FC - SDCARD_RX_STROBE_DLL_CNTL + SDCARD_RX_STROBE_DLL_CNTL. 0x0(Default). +**/ + UINT32 SdcardRxStrobeCntl; + +/** Offset 0x0300 - SDCARD_RX_CMD_DATA_DLL_CNTL2 + SDCARD_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default). +**/ + UINT32 SdcardRxCmdDataCntl2; + +/** Offset 0x0304 - EMMC_TX_CMD_DLL_CNTL + EMMC_TX_CMD_DLL_CNTL. 0x505(Default). +**/ + UINT32 EmmcTxCmdCntl; + +/** Offset 0x0308 - EMMC_TX_DATA_DLL_CNTL1 + EMMC_TX_DATA_DLL_CNTL1. 0xC11(Default). +**/ + UINT32 EmmcTxDataCntl1; + +/** Offset 0x030C - EMMC_TX_DATA_DLL_CNTL2 + EMMC_TX_DATA_DLL_CNTL2. 0x1C2A2927(Default). +**/ + UINT32 EmmcTxDataCntl2; + +/** Offset 0x0310 - EMMC_RX_CMD_DATA_DLL_CNTL1 + EMMC_RX_CMD_DATA_DLL_CNTL1. 0x000D162F(Default). +**/ + UINT32 EmmcRxCmdDataCntl1; + +/** Offset 0x0314 - EMMC_RX_STROBE_DLL_CNTL + EMMC_RX_STROBE_DLL_CNTL. 0x0a0a(Default). +**/ + UINT32 EmmcRxStrobeCntl; + +/** Offset 0x0318 - EMMC_RX_CMD_DATA_DLL_CNTL2 + EMMC_RX_CMD_DATA_DLL_CNTL2. 0x1003b(Default). +**/ + UINT32 EmmcRxCmdDataCntl2; + +/** Offset 0x031C - EMMC_MASTER_DLL_CNTL + EMMC_MASTER_DLL_CNTL. 0x001(Default). +**/ + UINT32 EmmcMasterSwCntl; + +/** Offset 0x0320 - PCIe Selectable De-emphasis + When the Link is operating at 5.0 GT/s speed, this bit selects the level of de-emphasis + for an Upstream component. 1b:-3.5 dB 0b:-6 dB. 0:Disable, 1:Enable(Default). +**/ + UINT8 PcieRpSelectableDeemphasis[6]; + +/** Offset 0x0326 +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x0327 - Monitor Mwait Enable + Enable/Disable Monitor Mwait. For Windows* OS, this should be Enabled. For Linux + based OS, this should be Disabled. 0:Disable, 1:Enable(Default). + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x0328 +**/ + UINT8 ReservedFspsUpd[8]; +} FSP_S_CONFIG; + +/** Fsp S Test Configuration +**/ +typedef struct { + +/** Offset 0x0330 +**/ + UINT32 Signature; + +/** Offset 0x0334 +**/ + UINT8 ReservedFspsTestUpd[12]; +} FSP_S_TEST_CONFIG; + +/** Fsp S Restricted Configuration +**/ +typedef struct { + +/** Offset 0x0340 +**/ + UINT32 Signature; + +/** Offset 0x0344 +**/ + UINT8 ReservedFspsRestrictedUpd[12]; +} FSP_S_RESTRICTED_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x0330 +**/ + FSP_S_TEST_CONFIG FspsTestConfig; + +/** Offset 0x0340 +**/ + FSP_S_RESTRICTED_CONFIG FspsRestrictedConfig; + +/** Offset 0x0350 +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack(pop) + +#endif |