summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/soc/intel/Kconfig1
-rw-r--r--src/soc/intel/Makefile.inc1
-rw-r--r--src/soc/intel/fsp_baytrail/Kconfig162
-rw-r--r--src/soc/intel/fsp_baytrail/Makefile.inc90
-rw-r--r--src/soc/intel/fsp_baytrail/acpi.c574
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/cpu.asl77
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/device_nvs.asl87
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/globalnvs.asl103
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/gpio.asl110
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/irq_helper.h55
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/irqlinks.asl493
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/irqroute.asl43
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/lpc.asl167
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/lpe.asl119
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/lpss.asl712
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/platform.asl73
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/scc.asl187
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/sleepstates.asl26
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/southcluster.asl284
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/usb.asl54
-rw-r--r--src/soc/intel/fsp_baytrail/acpi/xhci.asl36
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/acpi.h34
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/baytrail.h74
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/device_nvs.h67
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/ehci.h44
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/gfx.h48
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/gpio.h387
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/iomap.h90
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/iosf.h195
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/irq.h165
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/lpc.h112
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/msr.h41
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/nvm.h34
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/nvs.h73
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/pattrs.h65
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/pci_devs.h241
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/pcie.h102
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/pmc.h307
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/ramstage.h35
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/reset.h36
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/romstage.h52
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/smm.h48
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/spi.h68
-rw-r--r--src/soc/intel/fsp_baytrail/baytrail/xhci.h56
-rw-r--r--src/soc/intel/fsp_baytrail/bootblock/bootblock.c112
-rw-r--r--src/soc/intel/fsp_baytrail/chip.c116
-rw-r--r--src/soc/intel/fsp_baytrail/chip.h183
-rw-r--r--src/soc/intel/fsp_baytrail/cpu.c278
-rw-r--r--src/soc/intel/fsp_baytrail/fsp/Kconfig31
-rw-r--r--src/soc/intel/fsp_baytrail/fsp/Makefile.inc22
-rw-r--r--src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c335
-rw-r--r--src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.h49
-rw-r--r--src/soc/intel/fsp_baytrail/gpio.c239
-rw-r--r--src/soc/intel/fsp_baytrail/iosf.c111
-rw-r--r--src/soc/intel/fsp_baytrail/memmap.c28
-rw-r--r--src/soc/intel/fsp_baytrail/microcode/Makefile.inc25
-rw-r--r--src/soc/intel/fsp_baytrail/microcode/microcode_blob.c25
-rw-r--r--src/soc/intel/fsp_baytrail/northcluster.c222
-rw-r--r--src/soc/intel/fsp_baytrail/nvm.c88
-rw-r--r--src/soc/intel/fsp_baytrail/placeholders.c15
-rw-r--r--src/soc/intel/fsp_baytrail/pmutil.c364
-rw-r--r--src/soc/intel/fsp_baytrail/raminit.c48
-rw-r--r--src/soc/intel/fsp_baytrail/ramstage.c138
-rw-r--r--src/soc/intel/fsp_baytrail/reset.c47
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/Makefile.inc26
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/pmc.c41
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/report_platform.c88
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/romstage.c232
-rw-r--r--src/soc/intel/fsp_baytrail/romstage/uart.c38
-rw-r--r--src/soc/intel/fsp_baytrail/smihandler.c406
-rw-r--r--src/soc/intel/fsp_baytrail/smm.c132
-rw-r--r--src/soc/intel/fsp_baytrail/southcluster.c661
-rw-r--r--src/soc/intel/fsp_baytrail/spi.c652
-rw-r--r--src/soc/intel/fsp_baytrail/tsc_freq.c84
74 files changed, 10664 insertions, 0 deletions
diff --git a/src/soc/intel/Kconfig b/src/soc/intel/Kconfig
index 07099b32b6..3ddbf2841e 100644
--- a/src/soc/intel/Kconfig
+++ b/src/soc/intel/Kconfig
@@ -1 +1,2 @@
source src/soc/intel/baytrail/Kconfig
+source src/soc/intel/fsp_baytrail/Kconfig
diff --git a/src/soc/intel/Makefile.inc b/src/soc/intel/Makefile.inc
index ad798174be..b2f3cde20b 100644
--- a/src/soc/intel/Makefile.inc
+++ b/src/soc/intel/Makefile.inc
@@ -1 +1,2 @@
subdirs-$(CONFIG_SOC_INTEL_BAYTRAIL) += baytrail
+subdirs-$(CONFIG_SOC_INTEL_FSP_BAYTRAIL) += fsp_baytrail
diff --git a/src/soc/intel/fsp_baytrail/Kconfig b/src/soc/intel/fsp_baytrail/Kconfig
new file mode 100644
index 0000000000..220edf79eb
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/Kconfig
@@ -0,0 +1,162 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config SOC_INTEL_FSP_BAYTRAIL
+ bool
+ help
+ Bay Trail I part support using the Intel FSP.
+
+if SOC_INTEL_FSP_BAYTRAIL
+
+config CPU_SPECIFIC_OPTIONS
+ def_bool y
+ select ARCH_BOOTBLOCK_X86_32
+ select ARCH_ROMSTAGE_X86_32
+ select ARCH_RAMSTAGE_X86_32
+ select DYNAMIC_CBMEM
+ select HAVE_HARD_RESET
+ select MMCONF_SUPPORT
+ select MMCONF_SUPPORT_DEFAULT
+ select RELOCATABLE_MODULES
+ select PARALLEL_MP
+ select REG_SCRIPT
+ select SMP
+ select SPI_FLASH
+ select SSE2
+ select TSC_CONSTANT_RATE
+ select TSC_SYNC_MFENCE
+ select UDELAY_TSC
+ select SUPPORT_CPU_UCODE_IN_CBFS if INCLUDE_MICROCODE_IN_BUILD
+ select CPU_MICROCODE_ADDED_DURING_BUILD if INCLUDE_MICROCODE_IN_BUILD
+ select ROMSTAGE_RTC_INIT
+
+config BOOTBLOCK_CPU_INIT
+ string
+ default "soc/intel/fsp_baytrail/bootblock/bootblock.c"
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0x80000000
+ help
+ This is set by the FSP
+
+config MAX_CPUS
+ int
+ default 4
+
+config CPU_ADDR_BITS
+ int
+ default 36
+
+config SMM_TSEG_SIZE
+ hex
+ default 0x100000
+ help
+ This is set by the FSP
+
+config SMM_RESERVED_SIZE
+ hex
+ default 0x100000
+
+config VGA_BIOS_ID
+ string
+ default "8086,0f31"
+ help
+ This is the default PCI ID for the Bay Trail graphics
+ devices. This string names the vbios rom in cbfs.
+
+config INCLUDE_MICROCODE_IN_BUILD
+ bool "Build in microcode patch"
+ default n
+ help
+ Enable if the microcode patch is available. For the
+ BayTrail - I processors, the filename should start with
+ "M01". Using a microcode patch for the incorrect BayTrail
+ SKU will lead to unpredictable results.
+
+config MICROCODE_INCLUDE_PATH
+ string "Microcode Include path"
+ default "../intel/cpu/baytrail/microcode"
+ depends on SUPPORT_CPU_UCODE_IN_CBFS
+
+config CPU_MICROCODE_CBFS_LOC
+ hex
+ default 0xfff10040
+
+config CPU_MICROCODE_CBFS_LEN
+ hex
+ default 0xcc00
+ help
+ This should be updated when the microcode patch changes.
+
+config CBFS_SIZE
+ hex
+ default 0x200000
+ help
+ On Bay Trail systems the firmware image has to store a lot more
+ than just coreboot, including:
+ - a firmware descriptor
+ - Intel Trusted Execution Engine firmware
+ This option specifies the maximum size of the CBFS portion in the
+ firmware image.
+
+config INCLUDE_ME
+ bool "Include the TXE"
+ default n
+ help
+ Build the TXE and descriptor.bin into the ROM image. If you want to use a
+ descriptor.bin and TXE file from the previous ROM image, you may not want
+ to build it in here.
+
+config ME_PATH
+ string
+ depends on INCLUDE_ME
+ help
+ The path of the TXE and Descriptor files.
+
+config LOCK_MANAGEMENT_ENGINE
+ bool "Lock TXE section"
+ default n
+ depends on INCLUDE_ME
+ help
+ The Intel Trusted Execution Engine supports preventing write accesses
+ from the host to the Management Engine section in the firmware
+ descriptor. If the ME section is locked, it can only be overwritten
+ with an external SPI flash programmer. You will want this if you
+ want to increase security of your ROM image once you are sure
+ that the ME firmware is no longer going to change.
+
+ If unsure, say N.
+
+config ENABLE_BUILTIN_COM1
+ bool "Enable built-in legacy Serial Port"
+ help
+ The Baytrail SOC has one legacy serial port. Choose this option to
+ configure the pads and enable it. This serial port can be used for
+ the debug console.
+
+config VGA_BIOS_FILE
+ string
+ default "../intel/cpu/baytrail/vbios/Baytrail_I_36_2_2/Vga.dat" if VGA_BIOS
+
+## Baytrail Specific FSP Kconfig
+source src/soc/intel/fsp_baytrail/fsp/Kconfig
+
+endif #SOC_INTEL_FSP_BAYTRAIL
diff --git a/src/soc/intel/fsp_baytrail/Makefile.inc b/src/soc/intel/fsp_baytrail/Makefile.inc
new file mode 100644
index 0000000000..e0f1e1dfc0
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/Makefile.inc
@@ -0,0 +1,90 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2010 Google Inc.
+# Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+subdirs-y += microcode
+subdirs-y += romstage
+subdirs-y += ../../../cpu/x86/lapic
+subdirs-y += ../../../cpu/x86/mtrr
+subdirs-$(CONFIG_HAVE_SMI_HANDLER) += ../../../cpu/x86/smm
+subdirs-y += ../../../cpu/x86/tsc
+subdirs-y += ../../../cpu/x86/cache
+subdirs-y += ../../../cpu/intel/turbo
+subdirs-y += ../../../lib/fsp
+subdirs-y += fsp
+
+ramstage-y += memmap.c
+romstage-y += memmap.c
+ramstage-y += tsc_freq.c
+romstage-y += tsc_freq.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += tsc_freq.c
+ramstage-$(CONFIG_CACHE_MRC_SETTINGS) += nvm.c
+ramstage-y += spi.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += spi.c
+ramstage-y += chip.c
+ramstage-y += iosf.c
+romstage-y += iosf.c
+ramstage-y += northcluster.c
+ramstage-y += ramstage.c
+ramstage-y += gpio.c
+ramstage-y += pmutil.c
+romstage-y += raminit.c
+ramstage-y += raminit.c
+ramstage-y += southcluster.c
+romstage-y += reset.c
+ramstage-y += reset.c
+ramstage-y += cpu.c
+ramstage-y += acpi.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += pmutil.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c
+ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smm.c
+
+ramstage-y += placeholders.c
+
+CPPFLAGS_common += -I$(src)/soc/intel/fsp_baytrail/
+CPPFLAGS_common += -I$(src)/soc/intel/fsp_baytrail/fsp
+
+# Run an intermediate step when producing coreboot.rom
+# that adds additional components to the final firmware
+# image outside of CBFS
+ifeq ($(CONFIG_INCLUDE_ME),y)
+ifneq ($(CONFIG_ME_PATH),)
+INTERMEDIATE:=baytrail_add_txe
+
+baytrail_add_txe: $(obj)/coreboot.pre $(IFDTOOL)
+ printf " DD Adding Intel Firmware Descriptor\n"
+ dd if=$(call strip_quotes,$(CONFIG_ME_PATH))/descriptor.bin \
+ of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
+ printf " IFDTOOL txe.bin -> coreboot.pre\n"
+ $(objutil)/ifdtool/ifdtool \
+ -i ME:$(call strip_quotes,$(CONFIG_ME_PATH))/txe.bin \
+ $(obj)/coreboot.pre
+ mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
+ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y)
+ printf " IFDTOOL Locking Management Engine\n"
+ $(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre
+ mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
+else
+ printf " IFDTOOL Unlocking Management Engine\n"
+ $(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre
+ mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
+endif
+
+endif
+endif
+
diff --git a/src/soc/intel/fsp_baytrail/acpi.c b/src/soc/intel/fsp_baytrail/acpi.c
new file mode 100644
index 0000000000..dece178ba5
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi.c
@@ -0,0 +1,574 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/cpu.h>
+#include <cpu/x86/msr.h>
+#include <cpu/intel/speedstep.h>
+#include <cpu/intel/turbo.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <baytrail/baytrail.h>
+#include <device/pci_ids.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/acpi.h>
+#include <string.h>
+#include <baytrail/iomap.h>
+#include <baytrail/lpc.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/pmc.h>
+#include <baytrail/irq.h>
+#include <baytrail/iosf.h>
+#include <arch/io.h>
+#include <baytrail/msr.h>
+#include <baytrail/pattrs.h>
+#include <baytrail/pmc.h>
+#include <cbmem.h>
+
+#include "chip.h"
+
+#define MWAIT_RES(state, sub_state) \
+ { \
+ .addrl = (((state) << 4) | (sub_state)), \
+ .space_id = ACPI_ADDRESS_SPACE_FIXED, \
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, \
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, \
+ .access_size = ACPI_FFIXEDHW_FLAG_HW_COORD, \
+ }
+
+/* C-state map without S0ix */
+static acpi_cstate_t cstate_map[] = {
+ {
+ /* C1 */
+ .ctype = 1, /* ACPI C1 */
+ .latency = 1,
+ .power = 1000,
+ .resource = MWAIT_RES(0, 0),
+ },
+ {
+ /* C6NS with no L2 shrink */
+ /* NOTE: this substate is above CPUID limit */
+ .ctype = 2, /* ACPI C2 */
+ .latency = 500,
+ .power = 10,
+ .resource = MWAIT_RES(5, 1),
+ },
+ {
+ /* C6FS with full L2 shrink */
+ .ctype = 3, /* ACPI C3 */
+ .latency = 1500, /* 1.5ms worst case */
+ .power = 10,
+ .resource = MWAIT_RES(5, 2),
+ }
+};
+
+void acpi_init_gnvs(global_nvs_t *gnvs)
+{
+ /* CPU core count */
+ gnvs->pcnt = dev_count_cpu();
+
+ /* Top of Low Memory (start of resource allocation) */
+ gnvs->tolm = nc_read_top_of_low_memory();
+
+#if IS_ENABLED(CONFIG_CONSOLE_CBMEM)
+ /* Update the mem console pointer. */
+ gnvs->cbmc = (u32)cbmem_find(CBMEM_ID_CONSOLE);
+#endif
+}
+
+static int acpi_sci_irq(void)
+{
+ const unsigned long actl = ILB_BASE_ADDRESS + ACTL;
+ int scis;
+ static int sci_irq;
+
+ if (sci_irq)
+ return sci_irq;
+
+ /* Determine how SCI is routed. */
+ scis = read32(actl) & SCIS_MASK;
+ switch (scis) {
+ case SCIS_IRQ9:
+ case SCIS_IRQ10:
+ case SCIS_IRQ11:
+ sci_irq = scis - SCIS_IRQ9 + 9;
+ break;
+ case SCIS_IRQ20:
+ case SCIS_IRQ21:
+ case SCIS_IRQ22:
+ case SCIS_IRQ23:
+ sci_irq = scis - SCIS_IRQ20 + 20;
+ break;
+ default:
+ printk(BIOS_DEBUG, "Invalid SCI route! Defaulting to IRQ9.\n");
+ sci_irq = 9;
+ break;
+ }
+
+ printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq);
+ return sci_irq;
+}
+
+void acpi_create_intel_hpet(acpi_hpet_t * hpet)
+{
+ acpi_header_t *header = &(hpet->header);
+ acpi_addr_t *addr = &(hpet->addr);
+
+ memset((void *) hpet, 0, sizeof(acpi_hpet_t));
+
+ /* fill out header fields */
+ memcpy(header->signature, "HPET", 4);
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+
+ header->length = sizeof(acpi_hpet_t);
+ header->revision = 1;
+
+ /* fill out HPET address */
+ addr->space_id = 0; /* Memory */
+ addr->bit_width = 64;
+ addr->bit_offset = 0;
+ addr->addrl = (unsigned long long)HPET_BASE_ADDRESS & 0xffffffff;
+ addr->addrh = (unsigned long long)HPET_BASE_ADDRESS >> 32;
+
+ hpet->id = 0x8086a201; /* Intel */
+ hpet->number = 0x00;
+ hpet->min_tick = 0x0080;
+
+ header->checksum =
+ acpi_checksum((void *) hpet, sizeof(acpi_hpet_t));
+}
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)current,
+ MCFG_BASE_ADDRESS, 0, 0, 255);
+ return current;
+}
+
+/**
+ * Fill in the fadt with generic values that can be overridden later.
+ */
+
+typedef struct soc_intel_fsp_baytrail_config config_t;
+
+void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+ struct device *lpcdev = dev_find_slot(FADT_SOC_LPC_DEV);
+ u16 pmbase = pci_read_config16(lpcdev, ABASE) & 0xfff0;
+ config_t *config = lpcdev->chip_info;
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+
+ /*
+ * Reference section 5.2.9 Fixed ACPI Description Table (FADT)
+ * in the ACPI 3.0b specification.
+ */
+
+ /* FADT Header Structure */
+ memcpy(header->signature, "FACP", 4);
+ header->length = sizeof(acpi_fadt_t);
+ header->revision = ACPI_FADT_REV_ACPI_3_0;
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+ header->asl_compiler_revision = 1;
+
+ /* ACPI Pointers */
+ fadt->firmware_ctrl = (unsigned long) facs;
+ fadt->dsdt = (unsigned long) dsdt;
+
+ fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */
+ fadt->preferred_pm_profile = config->fadt_pm_profile; /* unknown is default */
+
+ /* System Management */
+ fadt->sci_int = acpi_sci_irq();
+#if IS_ENABLED(CONFIG_BAYTRAIL_SMM)
+ fadt->smi_cmd = APM_CNT;
+ fadt->acpi_enable = APM_CNT_ACPI_ENABLE;
+ fadt->acpi_disable = APM_CNT_ACPI_DISABLE;
+#else
+ fadt->smi_cmd = 0x00; /* disable SMM */
+ fadt->acpi_enable = 0x00; /* unused if SMI_CMD = 0 */
+ fadt->acpi_disable = 0x00; /* unused if SMI_CMD = 0 */
+
+ /* Enable ACPI */
+ outl(inl(pmbase + 4) | 0x01, pmbase + 4);
+#endif
+
+ /* Power Control */
+ fadt->s4bios_req = 0x00;
+ fadt->pstate_cnt = 0x00;
+
+ /* Control Registers - Base Address */
+ fadt->pm1a_evt_blk = pmbase + PM1_STS;
+ fadt->pm1b_evt_blk = 0x00; /* Not Used */
+ fadt->pm1a_cnt_blk = pmbase + PM1_CNT;
+ fadt->pm1b_cnt_blk = 0x00; /* Not Used */
+ fadt->pm2_cnt_blk = pmbase + PM2A_CNT_BLK;
+ fadt->pm_tmr_blk = pmbase + PM1_TMR;
+ fadt->gpe0_blk = pmbase + GPE0_STS;
+ fadt->gpe1_blk = 0x00; /* Not Used */
+
+ /* Control Registers - Length */
+ fadt->pm1_evt_len = 4; /* 32 bits */
+ fadt->pm1_cnt_len = 2; /* 32 bit register, 16 bits used */
+ fadt->pm2_cnt_len = 1; /* 8 bits */
+ fadt->pm_tmr_len = 4; /* 32 bits */
+ fadt->gpe0_blk_len = 8; /* 64 bits */
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = 0;
+ fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED;
+ fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED;
+ fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */
+ fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */
+ fadt->duty_offset = 1;
+ fadt->duty_width = 0;
+
+ /* RTC Registers */
+ fadt->day_alrm = 0x0D;
+ fadt->mon_alrm = 0x00;
+ fadt->century = 0x00;
+ fadt->iapc_boot_arch = config->fadt_boot_arch; /* legacy free default */
+
+ fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
+ ACPI_FADT_RESET_REGISTER | ACPI_FADT_SLEEP_TYPE |
+ ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
+
+ /* Reset Register */
+ fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->reset_reg.bit_width = 8;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+ fadt->reset_reg.addrl = 0xCF9;
+ fadt->reset_reg.addrh = 0x00;
+ fadt->reset_value = 6;
+
+ /* Reserved Bits */
+ fadt->res3 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */
+ fadt->res4 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */
+ fadt->res5 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */
+
+ /* Extended ACPI Pointers */
+ fadt->x_firmware_ctl_l = (unsigned long)facs;
+ fadt->x_firmware_ctl_h = 0x00;
+ fadt->x_dsdt_l = (unsigned long)dsdt;
+ fadt->x_dsdt_h = 0x00;
+
+ /* PM1 Status & PM1 Enable */
+ fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+ fadt->x_pm1a_evt_blk.addrl = fadt->pm1a_evt_blk;
+ fadt->x_pm1a_evt_blk.addrh = 0x00;
+
+ fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm1b_evt_blk.bit_width = 0;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.access_size = 0;
+ fadt->x_pm1b_evt_blk.addrl = fadt->pm1b_evt_blk;
+ fadt->x_pm1b_evt_blk.addrh = 0x00;
+
+ /* PM1 Control Registers */
+ fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
+ fadt->x_pm1a_cnt_blk.addrl = fadt->pm1a_cnt_blk;
+ fadt->x_pm1a_cnt_blk.addrh = 0x00;
+
+ fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm1b_cnt_blk.bit_width = 0;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.access_size = 0;
+ fadt->x_pm1b_cnt_blk.addrl = fadt->pm1b_cnt_blk;
+ fadt->x_pm1b_cnt_blk.addrh = 0x00;
+
+ /* PM2 Control Registers */
+ fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm2_cnt_blk.bit_width = 8;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+ fadt->x_pm2_cnt_blk.addrl = fadt->pm2_cnt_blk;
+ fadt->x_pm2_cnt_blk.addrh = 0x00;
+
+ /* PM1 Timer Register */
+ fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+ fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk;
+ fadt->x_pm_tmr_blk.addrh = 0x00;
+
+ /* General-Purpose Event Registers */
+ fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + EventEnable */
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+ fadt->x_gpe0_blk.addrl = fadt->gpe0_blk;
+ fadt->x_gpe0_blk.addrh = 0x00;
+
+ fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.access_size = 0;
+ fadt->x_gpe1_blk.addrl = fadt->gpe1_blk;
+ fadt->x_gpe1_blk.addrh = 0x00;
+
+ header->checksum =
+ acpi_checksum((void *) fadt, sizeof(acpi_fadt_t));
+}
+static acpi_tstate_t baytrail_tss_table[] = {
+ { 100, 1000, 0, 0x00, 0 },
+ { 88, 875, 0, 0x1e, 0 },
+ { 75, 750, 0, 0x1c, 0 },
+ { 63, 625, 0, 0x1a, 0 },
+ { 50, 500, 0, 0x18, 0 },
+ { 38, 375, 0, 0x16, 0 },
+ { 25, 250, 0, 0x14, 0 },
+ { 13, 125, 0, 0x12, 0 },
+};
+
+static int generate_T_state_entries(int core, int cores_per_package)
+{
+ int len;
+
+ /* Indicate SW_ALL coordination for T-states */
+ len = acpigen_write_TSD_package(core, cores_per_package, SW_ALL);
+
+ /* Indicate FFixedHW so OS will use MSR */
+ len += acpigen_write_empty_PTC();
+
+ /* Set NVS controlled T-state limit */
+ len += acpigen_write_TPC("\\TLVL");
+
+ /* Write TSS table for MSR access */
+ len += acpigen_write_TSS_package(
+ ARRAY_SIZE(baytrail_tss_table), baytrail_tss_table);
+
+ return len;
+}
+
+static int calculate_power(int tdp, int p1_ratio, int ratio)
+{
+ u32 m;
+ u32 power;
+
+ /*
+ * M = ((1.1 - ((p1_ratio - ratio) * 0.00625)) / 1.1) ^ 2
+ *
+ * Power = (ratio / p1_ratio) * m * tdp
+ */
+
+ m = (110000 - ((p1_ratio - ratio) * 625)) / 11;
+ m = (m * m) / 1000;
+
+ power = ((ratio * 100000 / p1_ratio) / 100);
+ power *= (m / 100) * (tdp / 1000);
+ power /= 1000;
+
+ return (int)power;
+}
+
+static int generate_P_state_entries(int core, int cores_per_package)
+{
+ int len, len_pss;
+ int ratio_min, ratio_max, ratio_turbo, ratio_step, ratio_range_2;
+ int coord_type, power_max, power_unit, num_entries;
+ int ratio, power, clock, clock_max;
+ int vid, vid_turbo, vid_min, vid_max, vid_range_2;
+ u32 control_status;
+ const struct pattrs *pattrs = pattrs_get();
+ msr_t msr;
+
+ /* Inputs from CPU attributes */
+ ratio_max = pattrs->iacore_ratios[IACORE_MAX];
+ ratio_min = pattrs->iacore_ratios[IACORE_LFM];
+ vid_max = pattrs->iacore_vids[IACORE_MAX];
+ vid_min = pattrs->iacore_vids[IACORE_LFM];
+
+ /* Hardware coordination of P-states */
+ coord_type = HW_ALL;
+
+ /* Max Non-Turbo Frequency */
+ clock_max = (ratio_max * pattrs->bclk_khz) / 1000;
+
+ /* Calculate CPU TDP in mW */
+ msr = rdmsr(MSR_PKG_POWER_SKU_UNIT);
+ power_unit = 1 << (msr.lo & 0xf);
+ msr = rdmsr(MSR_PKG_POWER_LIMIT);
+ power_max = ((msr.lo & 0x7fff) / power_unit) * 1000;
+
+ /* Write _PCT indicating use of FFixedHW */
+ len = acpigen_write_empty_PCT();
+
+ /* Write _PPC with NVS specified limit on supported P-state */
+ len += acpigen_write_PPC_NVS();
+
+ /* Write PSD indicating configured coordination type */
+ len += acpigen_write_PSD_package(core, 1, coord_type);
+
+ /* Add P-state entries in _PSS table */
+ len += acpigen_write_name("_PSS");
+
+ /* Determine ratio points */
+ ratio_step = 1;
+ num_entries = (ratio_max - ratio_min) / ratio_step;
+ while (num_entries > 15) { /* ACPI max is 15 ratios */
+ ratio_step <<= 1;
+ num_entries >>= 1;
+ }
+
+ /* P[T] is Turbo state if enabled */
+ if (get_turbo_state() == TURBO_ENABLED) {
+ /* _PSS package count including Turbo */
+ len_pss = acpigen_write_package(num_entries + 2);
+
+ ratio_turbo = pattrs->iacore_ratios[IACORE_TURBO];
+ vid_turbo = pattrs->iacore_vids[IACORE_TURBO];
+ control_status = (ratio_turbo << 8) | vid_turbo;
+
+ /* Add entry for Turbo ratio */
+ len_pss += acpigen_write_PSS_package(
+ clock_max + 1, /*MHz*/
+ power_max, /*mW*/
+ 10, /*lat1*/
+ 10, /*lat2*/
+ control_status, /*control*/
+ control_status); /*status*/
+ } else {
+ /* _PSS package count without Turbo */
+ len_pss = acpigen_write_package(num_entries + 1);
+ ratio_turbo = ratio_max;
+ vid_turbo = vid_max;
+ }
+
+ /* First regular entry is max non-turbo ratio */
+ control_status = (ratio_max << 8) | vid_max;
+ len_pss += acpigen_write_PSS_package(
+ clock_max, /*MHz*/
+ power_max, /*mW*/
+ 10, /*lat1*/
+ 10, /*lat2*/
+ control_status, /*control */
+ control_status); /*status*/
+
+ /* Set up ratio and vid ranges for VID calculation */
+ ratio_range_2 = (ratio_turbo - ratio_min) * 2;
+ vid_range_2 = (vid_turbo - vid_min) * 2;
+
+ /* Generate the remaining entries */
+ for (ratio = ratio_min + ((num_entries - 1) * ratio_step);
+ ratio >= ratio_min; ratio -= ratio_step) {
+
+ /* Calculate VID for this ratio */
+ vid = ((ratio - ratio_min) * vid_range_2) /
+ ratio_range_2 + vid_min;
+ /* Round up if remainder */
+ if (((ratio - ratio_min) * vid_range_2) % ratio_range_2)
+ vid++;
+
+ /* Calculate power at this ratio */
+ power = calculate_power(power_max, ratio_max, ratio);
+ clock = (ratio * pattrs->bclk_khz) / 1000;
+ control_status = (ratio << 8) | (vid & 0xff);
+
+ len_pss += acpigen_write_PSS_package(
+ clock, /*MHz*/
+ power, /*mW*/
+ 10, /*lat1*/
+ 10, /*lat2*/
+ control_status, /*control*/
+ control_status); /*status*/
+ }
+
+ /* Fix package length */
+ len_pss--;
+ acpigen_patch_len(len_pss);
+
+ return len + len_pss;
+}
+
+void generate_cpu_entries(void)
+{
+ int len_pr, core;
+ int pcontrol_blk = get_pmbase(), plen = 6;
+ const struct pattrs *pattrs = pattrs_get();
+
+ for (core=0; core<pattrs->num_cpus; core++) {
+ if (core > 0) {
+ pcontrol_blk = 0;
+ plen = 0;
+ }
+
+ /* Generate processor \_PR.CPUx */
+ len_pr = acpigen_write_processor(
+ core, pcontrol_blk, plen);
+
+ /* Generate P-state tables */
+ len_pr += generate_P_state_entries(
+ core, pattrs->num_cpus);
+
+ /* Generate C-state tables */
+ len_pr += acpigen_write_CST_package(
+ cstate_map, ARRAY_SIZE(cstate_map));
+
+ /* Generate T-state tables */
+ len_pr += generate_T_state_entries(
+ core, pattrs->num_cpus);
+
+ len_pr--;
+ acpigen_patch_len(len_pr);
+ }
+}
+
+unsigned long acpi_madt_irq_overrides(unsigned long current)
+{
+ int sci_irq = acpi_sci_irq();
+ acpi_madt_irqoverride_t *irqovr;
+ uint16_t sci_flags = MP_IRQ_TRIGGER_LEVEL;
+
+ /* INT_SRC_OVR */
+ irqovr = (void *)current;
+ current += acpi_create_madt_irqoverride(irqovr, 0, 0, 2, 0);
+
+ if (sci_irq >= 20)
+ sci_flags |= MP_IRQ_POLARITY_LOW;
+ else
+ sci_flags |= MP_IRQ_POLARITY_HIGH;
+
+ irqovr = (void *)current;
+ current += acpi_create_madt_irqoverride(irqovr, 0, sci_irq, sci_irq,
+ sci_flags);
+
+ return current;
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/cpu.asl b/src/soc/intel/fsp_baytrail/acpi/cpu.asl
new file mode 100644
index 0000000000..16f62ba309
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/cpu.asl
@@ -0,0 +1,77 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* These devices are created at runtime */
+External (\_PR.CPU0, DeviceObj)
+External (\_PR.CPU1, DeviceObj)
+External (\_PR.CPU2, DeviceObj)
+External (\_PR.CPU3, DeviceObj)
+
+/* Notify OS to re-read CPU tables, assuming ^2 CPU count */
+Method (PNOT)
+{
+ If (LGreaterEqual (\PCNT, 2)) {
+ Notify (\_PR.CPU0, 0x81) // _CST
+ Notify (\_PR.CPU1, 0x81) // _CST
+ }
+ If (LGreaterEqual (\PCNT, 4)) {
+ Notify (\_PR.CPU2, 0x81) // _CST
+ Notify (\_PR.CPU3, 0x81) // _CST
+ }
+}
+
+/* Notify OS to re-read CPU _PPC limit, assuming ^2 CPU count */
+Method (PPCN)
+{
+ If (LGreaterEqual (\PCNT, 2)) {
+ Notify (\_PR.CPU0, 0x80) // _PPC
+ Notify (\_PR.CPU1, 0x80) // _PPC
+ }
+ If (LGreaterEqual (\PCNT, 4)) {
+ Notify (\_PR.CPU2, 0x80) // _PPC
+ Notify (\_PR.CPU3, 0x80) // _PPC
+ }
+}
+
+/* Notify OS to re-read Throttle Limit tables, assuming ^2 CPU count */
+Method (TNOT)
+{
+ If (LGreaterEqual (\PCNT, 2)) {
+ Notify (\_PR.CPU0, 0x82) // _TPC
+ Notify (\_PR.CPU1, 0x82) // _TPC
+ }
+ If (LGreaterEqual (\PCNT, 4)) {
+ Notify (\_PR.CPU2, 0x82) // _TPC
+ Notify (\_PR.CPU3, 0x82) // _TPC
+ }
+}
+
+/* Return a package containing enabled processor entries */
+Method (PPKG)
+{
+ If (LGreaterEqual (\PCNT, 4)) {
+ Return (Package() {\_PR.CPU0, \_PR.CPU1, \_PR.CPU2, \_PR.CPU3})
+ } ElseIf (LGreaterEqual (\PCNT, 2)) {
+ Return (Package() {\_PR.CPU0, \_PR.CPU1})
+ } Else {
+ Return (Package() {\_PR.CPU0})
+ }
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/device_nvs.asl b/src/soc/intel/fsp_baytrail/acpi/device_nvs.asl
new file mode 100644
index 0000000000..fce7b53054
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/device_nvs.asl
@@ -0,0 +1,87 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Device Enabled in ACPI Mode */
+
+S0EN, 8, // SDMA Enable
+S1EN, 8, // I2C1 Enable
+S2EN, 8, // I2C2 Enable
+S3EN, 8, // I2C3 Enable
+S4EN, 8, // I2C4 Enable
+S5EN, 8, // I2C5 Enable
+S6EN, 8, // I2C6 Enable
+S7EN, 8, // I2C7 Enable
+S8EN, 8, // SDMA2 Enable
+S9EN, 8, // SPI Enable
+SAEN, 8, // PWM1 Enable
+SBEN, 8, // PWM2 Enable
+SCEN, 8, // UART2 Enable
+SDEN, 8, // UART2 Enable
+C0EN, 8, // MMC Enable
+C1EN, 8, // SDIO Enable
+C2EN, 8, // SD Card Enable
+LPEN, 8, // LPE Enable
+
+/* BAR 0 */
+
+S0B0, 32, // SDMA BAR0
+S1B0, 32, // I2C1 BAR0
+S2B0, 32, // I2C2 BAR0
+S3B0, 32, // I2C3 BAR0
+S4B0, 32, // I2C4 BAR0
+S5B0, 32, // I2C5 BAR0
+S6B0, 32, // I2C6 BAR0
+S7B0, 32, // I2C7 BAR0
+S8B0, 32, // SDMA2 BAR0
+S9B0, 32, // SPI BAR0
+SAB0, 32, // PWM1 BAR0
+SBB0, 32, // PWM2 BAR0
+SCB0, 32, // UART1 BAR0
+SDB0, 32, // UART2 BAR0
+C0B0, 32, // MMC BAR0
+C1B0, 32, // SDIO BAR0
+C2B0, 32, // SD Card BAR0
+LPB0, 32, // LPE BAR0
+
+/* BAR 1 */
+
+S0B1, 32, // SDMA BAR1
+S1B1, 32, // I2C1 BAR1
+S2B1, 32, // I2C2 BAR1
+S3B1, 32, // I2C3 BAR1
+S4B1, 32, // I2C4 BAR1
+S5B1, 32, // I2C5 BAR1
+S6B1, 32, // I2C6 BAR1
+S7B1, 32, // I2C7 BAR1
+S8B1, 32, // SDMA2 BAR1
+S9B1, 32, // SPI BAR1
+SAB1, 32, // PWM1 BAR1
+SBB1, 32, // PWM2 BAR1
+SCB1, 32, // UART1 BAR1
+SDB1, 32, // UART2 BAR1
+C0B1, 32, // MMC BAR1
+C1B1, 32, // SDIO BAR1
+C2B1, 32, // SD Card BAR1
+LPB1, 32, // LPE BAR1
+
+/* Extra */
+
+LPFW, 32, // LPE BAR2 Firmware
diff --git a/src/soc/intel/fsp_baytrail/acpi/globalnvs.asl b/src/soc/intel/fsp_baytrail/acpi/globalnvs.asl
new file mode 100644
index 0000000000..696390d6b0
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/globalnvs.asl
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Global Variables */
+
+Name(\PICM, 0) // IOAPIC/8259
+
+/* Global ACPI memory region. This region is used for passing information
+ * between coreboot (aka "the system bios"), ACPI, and the SMI handler.
+ * Since we don't know where this will end up in memory at ACPI compile time,
+ * we have to fix it up in coreboot's ACPI creation phase.
+ */
+
+
+OperationRegion (GNVS, SystemMemory, 0xC0DEBABE, 0x2000)
+Field (GNVS, ByteAcc, NoLock, Preserve)
+{
+ /* Miscellaneous */
+ Offset (0x00),
+ OSYS, 16, // 0x00 - Operating System
+ SMIF, 8, // 0x02 - SMI function
+ PRM0, 8, // 0x03 - SMI function parameter
+ PRM1, 8, // 0x04 - SMI function parameter
+ SCIF, 8, // 0x05 - SCI function
+ PRM2, 8, // 0x06 - SCI function parameter
+ PRM3, 8, // 0x07 - SCI function parameter
+ LCKF, 8, // 0x08 - Global Lock function for EC
+ PRM4, 8, // 0x09 - Lock function parameter
+ PRM5, 8, // 0x0a - Lock function parameter
+ P80D, 32, // 0x0b - Debug port (IO 0x80) value
+ LIDS, 8, // 0x0f - LID state (open = 1)
+ PWRS, 8, // 0x10 - Power State (AC = 1)
+ PCNT, 8, // 0x11 - Processor count
+ TPMP, 8, // 0x12 - TPM Present and Enabled
+ TLVL, 8, // 0x13 - Throttle Level
+ PPCM, 8, // 0x14 - Maximum P-state usable by OS
+
+ /* Device Config */
+ Offset (0x20),
+ S5U0, 8, // 0x20 - Enable USB0 in S5
+ S5U1, 8, // 0x21 - Enable USB1 in S5
+ S3U0, 8, // 0x22 - Enable USB0 in S3
+ S3U1, 8, // 0x23 - Enable USB1 in S3
+ TACT, 8, // 0x24 - Thermal Active trip point
+ TPSV, 8, // 0x25 - Thermal Passive trip point
+ TCRT, 8, // 0x26 - Thermal Critical trip point
+ DPTE, 8, // 0x27 - Enable DPTF
+
+ /* Base addresses */
+ Offset (0x30),
+ CMEM, 32, // 0x30 - CBMEM TOC
+ TOLM, 32, // 0x34 - Top of Low Memory
+ CBMC, 32, // 0x38 - coreboot mem console pointer
+
+ Offset (0x1000),
+ #include <soc/intel/fsp_baytrail/acpi/device_nvs.asl>
+}
+
+/* Set flag to enable USB charging in S3 */
+Method (S3UE)
+{
+ Store (One, \S3U0)
+ Store (One, \S3U1)
+}
+
+/* Set flag to disable USB charging in S3 */
+Method (S3UD)
+{
+ Store (Zero, \S3U0)
+ Store (Zero, \S3U1)
+}
+
+/* Set flag to enable USB charging in S5 */
+Method (S5UE)
+{
+ Store (One, \S5U0)
+ Store (One, \S5U1)
+}
+
+/* Set flag to disable USB charging in S5 */
+Method (S5UD)
+{
+ Store (Zero, \S5U0)
+ Store (Zero, \S5U1)
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/gpio.asl b/src/soc/intel/fsp_baytrail/acpi/gpio.asl
new file mode 100644
index 0000000000..f2618a81f2
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/gpio.asl
@@ -0,0 +1,110 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <soc/intel/fsp_baytrail/baytrail/iomap.h>
+#include <soc/intel/fsp_baytrail/baytrail/irq.h>
+
+/* SouthCluster GPIO */
+Device (GPSC)
+{
+ Name (_HID, "INT33FC")
+ Name (_CID, "INT33FC")
+ Name (_UID, 1)
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, RMEM)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,,)
+ {
+ GPIO_SC_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
+ Add (IO_BASE_ADDRESS, IO_BASE_OFFSET_GPSCORE, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ Return (0xF)
+ }
+}
+
+/* NorthCluster GPIO */
+Device (GPNC)
+{
+ Name (_HID, "INT33FC")
+ Name (_CID, "INT33FC")
+ Name (_UID, 2)
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, RMEM)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,,)
+ {
+ GPIO_NC_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
+ Add (IO_BASE_ADDRESS, IO_BASE_OFFSET_GPNCORE, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ Return (0xF)
+ }
+}
+
+/* SUS GPIO */
+Device (GPSS)
+{
+ Name (_HID, "INT33FC")
+ Name (_CID, "INT33FC")
+ Name (_UID, 3)
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, RMEM)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,,)
+ {
+ GPIO_SUS_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^RMEM._BAS, RBAS)
+ Add (IO_BASE_ADDRESS, IO_BASE_OFFSET_GPSSUS, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ Return (0xF)
+ }
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/irq_helper.h b/src/soc/intel/fsp_baytrail/acpi/irq_helper.h
new file mode 100644
index 0000000000..e3a23d8eee
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/irq_helper.h
@@ -0,0 +1,55 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2014 Sage Electronics Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * This file will use arch/x86/acpi/irqroute.asl and mainboard/irqroute.h
+ * to generate the ACPI IRQ routing for the mainboard being compiled.
+ * This method uses #defines in irqroute.h along with the macros contained
+ * in this file to generate an IRQ routing for each PCI device in the system.
+ */
+#undef PCI_DEV_PIRQ_ROUTES
+#undef ACPI_DEV_IRQ
+#undef PCI_DEV_PIRQ_ROUTE
+#undef PIRQ_PIC_ROUTES
+#undef PIRQ_PIC
+
+#if defined(PIC_MODE)
+
+#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \
+ Package() { ## dev_ ## ffff, pin_, \_SB.PCI0.LPCB.LNK ## pin_name_, 0 }
+
+#else /* defined(PIC_MODE) */
+
+#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \
+ Package() { ## dev_ ## ffff, pin_, 0, PIRQ ## pin_name_ ## _APIC_IRQ }
+
+#endif
+
+#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \
+ ACPI_DEV_IRQ(dev_, 0, a_), \
+ ACPI_DEV_IRQ(dev_, 1, b_), \
+ ACPI_DEV_IRQ(dev_, 2, c_), \
+ ACPI_DEV_IRQ(dev_, 3, d_)
+
+/* Empty PIRQ_PIC definition. */
+#define PIRQ_PIC(pirq_, pic_irq_)
+
+/* Include the mainboard irq route definition */
+#include "irqroute.h"
diff --git a/src/soc/intel/fsp_baytrail/acpi/irqlinks.asl b/src/soc/intel/fsp_baytrail/acpi/irqlinks.asl
new file mode 100644
index 0000000000..5fcee45f29
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/irqlinks.asl
@@ -0,0 +1,493 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device (LNKA)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 1)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTA)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLA, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLA, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTA
+ ShiftLeft(1, And(PRTA, 0x0f), IRQ0)
+
+ Return (RTLA)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTA)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTA, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKB)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 2)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTB)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLB, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLB, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTB
+ ShiftLeft(1, And(PRTB, 0x0f), IRQ0)
+
+ Return (RTLB)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTB)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTB, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKC)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 3)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTC)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLC, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLC, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTC
+ ShiftLeft(1, And(PRTC, 0x0f), IRQ0)
+
+ Return (RTLC)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTC)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTC, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKD)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 4)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTD)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLD, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLD, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTD
+ ShiftLeft(1, And(PRTD, 0x0f), IRQ0)
+
+ Return (RTLD)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTD)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTD, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKE)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 5)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTE)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLE, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLE, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTE
+ ShiftLeft(1, And(PRTE, 0x0f), IRQ0)
+
+ Return (RTLE)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTE)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTE, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKF)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 6)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTF)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLF, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLF, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTF
+ ShiftLeft(1, And(PRTF, 0x0f), IRQ0)
+
+ Return (RTLF)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTF)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTF, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKG)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 7)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTG)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 10, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLG, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLG, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTG
+ ShiftLeft(1, And(PRTG, 0x0f), IRQ0)
+
+ Return (RTLG)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTG)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTG, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
+Device (LNKH)
+{
+ Name (_HID, EISAID("PNP0C0F"))
+ Name (_UID, 8)
+
+ // Disable method
+ Method (_DIS, 0, Serialized)
+ {
+ Store (0x80, PRTH)
+ }
+
+ // Possible Resource Settings for this Link
+ Name (_PRS, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared)
+ { 1, 3, 4, 5, 6, 7, 11, 12, 14, 15 }
+ })
+
+ // Current Resource Settings for this link
+ Method (_CRS, 0, Serialized)
+ {
+ Name (RTLH, ResourceTemplate()
+ {
+ IRQ(Level, ActiveLow, Shared) {}
+ })
+ CreateWordField(RTLH, 1, IRQ0)
+
+ // Clear the WordField
+ Store (Zero, IRQ0)
+
+ // Set the bit from PRTH
+ ShiftLeft(1, And(PRTH, 0x0f), IRQ0)
+
+ Return (RTLH)
+ }
+
+ // Set Resource Setting for this IRQ link
+ Method (_SRS, 1, Serialized)
+ {
+ CreateWordField(Arg0, 1, IRQ0)
+
+ // Which bit is set?
+ FindSetRightBit(IRQ0, Local0)
+
+ Decrement(Local0)
+ Store(Local0, PRTH)
+ }
+
+ // Status
+ Method (_STA, 0, Serialized)
+ {
+ If(And(PRTH, 0x80)) {
+ Return (0x9)
+ } Else {
+ Return (0xb)
+ }
+ }
+}
+
diff --git a/src/soc/intel/fsp_baytrail/acpi/irqroute.asl b/src/soc/intel/fsp_baytrail/acpi/irqroute.asl
new file mode 100644
index 0000000000..940f853e5a
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/irqroute.asl
@@ -0,0 +1,43 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+// PCI Interrupt Routing
+Method(_PRT)
+{
+ /*
+ * PICM comes from _PIC, which returns the following:
+ * 0 – PIC mode
+ * 1 – APIC mode
+ * 2 – SAPIC mode
+ */
+ If (PICM) {
+ Return (Package() {
+ #undef PIC_MODE
+ #include "irq_helper.h"
+ PCI_DEV_PIRQ_ROUTES
+ })
+ } Else {
+ Return (Package() {
+ #define PIC_MODE
+ #include "irq_helper.h"
+ PCI_DEV_PIRQ_ROUTES
+ })
+ }
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/lpc.asl b/src/soc/intel/fsp_baytrail/acpi/lpc.asl
new file mode 100644
index 0000000000..408d2b420f
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/lpc.asl
@@ -0,0 +1,167 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// Intel LPC Bus Device - 0:1f.0
+
+Device (LPCB)
+{
+ Name(_ADR, 0x001f0000)
+
+ #include "irqlinks.asl"
+
+ #include "acpi/ec.asl"
+
+ Device (DMAC) // DMA Controller
+ {
+ Name(_HID, EISAID("PNP0200"))
+ Name(_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x00, 0x00, 0x01, 0x20)
+ IO (Decode16, 0x81, 0x81, 0x01, 0x11)
+ IO (Decode16, 0x93, 0x93, 0x01, 0x0d)
+ IO (Decode16, 0xc0, 0xc0, 0x01, 0x20)
+ DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 }
+ })
+ }
+
+ Device (FWH) // Firmware Hub
+ {
+ Name (_HID, EISAID("INT0800"))
+ Name (_CRS, ResourceTemplate()
+ {
+ Memory32Fixed(ReadOnly, 0xff000000, 0x01000000)
+ })
+ }
+
+ Device (HPET)
+ {
+ Name (_HID, EISAID("PNP0103"))
+ Name (_CID, 0x010CD041)
+
+ Method (_STA, 0) // Device Status
+ {
+ Return (0xf) // Enable and show device
+ }
+
+ Name(_CRS, ResourceTemplate()
+ {
+ Memory32Fixed(ReadOnly, 0xfed00000, 0x400)
+ })
+ }
+
+ Device(PIC) // 8259 Interrupt Controller
+ {
+ Name(_HID,EISAID("PNP0000"))
+ Name(_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x20, 0x20, 0x01, 0x02)
+ IO (Decode16, 0x24, 0x24, 0x01, 0x02)
+ IO (Decode16, 0x28, 0x28, 0x01, 0x02)
+ IO (Decode16, 0x2c, 0x2c, 0x01, 0x02)
+ IO (Decode16, 0x30, 0x30, 0x01, 0x02)
+ IO (Decode16, 0x34, 0x34, 0x01, 0x02)
+ IO (Decode16, 0x38, 0x38, 0x01, 0x02)
+ IO (Decode16, 0x3c, 0x3c, 0x01, 0x02)
+ IO (Decode16, 0xa0, 0xa0, 0x01, 0x02)
+ IO (Decode16, 0xa4, 0xa4, 0x01, 0x02)
+ IO (Decode16, 0xa8, 0xa8, 0x01, 0x02)
+ IO (Decode16, 0xac, 0xac, 0x01, 0x02)
+ IO (Decode16, 0xb0, 0xb0, 0x01, 0x02)
+ IO (Decode16, 0xb4, 0xb4, 0x01, 0x02)
+ IO (Decode16, 0xb8, 0xb8, 0x01, 0x02)
+ IO (Decode16, 0xbc, 0xbc, 0x01, 0x02)
+ IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02)
+ IRQNoFlags () { 2 }
+ })
+ }
+
+ Device(LDRC) // LPC device: Resource consumption
+ {
+ Name (_HID, EISAID("PNP0C02"))
+ Name (_UID, 2)
+
+ Name (RBUF, ResourceTemplate()
+ {
+ IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status
+ IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved
+ IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved
+ IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved
+ IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post
+ IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved
+ IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI
+ })
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Return (RBUF)
+ }
+ }
+
+ Device (RTC) // Real Time Clock
+ {
+ Name (_HID, EISAID("PNP0B00"))
+ Name (_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x70, 0x70, 1, 8)
+// Disable as Windows doesn't like it, and systems don't seem to use it.
+// IRQNoFlags() { 8 }
+ })
+ }
+
+ Device (TIMR) // Intel 8254 timer
+ {
+ Name(_HID, EISAID("PNP0100"))
+ Name(_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x40, 0x40, 0x01, 0x04)
+ IO (Decode16, 0x50, 0x50, 0x10, 0x04)
+ IRQNoFlags() {0}
+ })
+ }
+
+ // Include mainboard's superio.asl file.
+ #include "acpi/superio.asl"
+
+#ifdef ENABLE_TPM
+ Device (TPM) // Trusted Platform Module
+ {
+ Name(_HID, EISAID("IFX0102"))
+ Name(_CID, 0x310cd041)
+ Name(_UID, 1)
+
+ Method(_STA, 0)
+ {
+ If (TPMP) {
+ Return (0xf)
+ }
+ Return (0x0)
+ }
+
+ Name(_CRS, ResourceTemplate() {
+ IO (Decode16, 0x2e, 0x2e, 0x01, 0x02)
+ IO (Decode16, 0x6f0, 0x6f0, 0x01, 0x10)
+ Memory32Fixed (ReadWrite, 0xfed40000, 0x5000)
+ IRQ (Edge, Activehigh, Exclusive) { 6 }
+ })
+ }
+#endif
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/lpe.asl b/src/soc/intel/fsp_baytrail/acpi/lpe.asl
new file mode 100644
index 0000000000..71a2746533
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/lpe.asl
@@ -0,0 +1,119 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device (LPEA)
+{
+ Name (_HID, "80860F28")
+ Name (_CID, "80860F28")
+ Name (_UID, 1)
+ Name (_DDN, "Low Power Audio Controller")
+ Name (_PR0, Package () { PLPE })
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x00200000, BAR0)
+ Memory32Fixed (ReadWrite, 0, 0x00001000, BAR1)
+ Memory32Fixed (ReadWrite, 0, 0x00100000, BAR2)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPE_DMA0_IRQ
+ }
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPE_DMA1_IRQ
+ }
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPE_SSP0_IRQ
+ }
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPE_SSP1_IRQ
+ }
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPE_SSP2_IRQ
+ }
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPE_IPC2HOST_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ /* Update BAR0 from NVS */
+ CreateDwordField (^RBUF, ^BAR0._BAS, BAS0)
+ Store (\LPB0, BAS0)
+
+ /* Update BAR1 from NVS */
+ CreateDwordField (^RBUF, ^BAR1._BAS, BAS1)
+ Store (\LPB1, BAS1)
+
+ /* Update LPE FW from NVS */
+ CreateDwordField (^RBUF, ^BAR2._BAS, BAS2)
+ Store (\LPFW, BAS2)
+
+ /* Append any Mainboard defined GPIOs */
+ If (CondRefOf (^GBUF, Local0)) {
+ ConcatenateResTemplate (^RBUF, Local0, Local1)
+ Return (Local1)
+ }
+
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\LPEN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, LPB1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ PowerResource (PLPE, 0, 0)
+ {
+ Method (_STA)
+ {
+ Return (1)
+ }
+
+ Method (_OFF)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_ON)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+ }
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/lpss.asl b/src/soc/intel/fsp_baytrail/acpi/lpss.asl
new file mode 100644
index 0000000000..0f8f7465f9
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/lpss.asl
@@ -0,0 +1,712 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device (SDM1)
+{
+ Name (_HID, "INTL9C60")
+ Name (_UID, 1)
+ Name (_DDN, "DMA Controller #1")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_DMA1_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S0B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S0EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+}
+
+Device (SDM2)
+{
+ Name (_HID, "INTL9C60")
+ Name (_UID, 2)
+ Name (_DDN, "DMA Controller #2")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_DMA2_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S8B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S8EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+}
+
+Device (I2C1)
+{
+ Name (_HID, "80860F41")
+ Name (_UID, 1)
+ Name (_DDN, "I2C Controller #1")
+
+ /* Standard Mode: HCNT, LCNT, SDA Hold Time */
+ Name (SSCN, Package () { 0x200, 0x200, 0x6 })
+
+ /* Fast Mode: HCNT, LCNT, SDA Hold Time */
+ Name (FMCN, Package () { 0x55, 0x99, 0x6 })
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_I2C1_IRQ
+ }
+ FixedDMA (0x10, 0x0, Width32Bit, )
+ FixedDMA (0x11, 0x1, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S1B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S1EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, S1B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (I2C2)
+{
+ Name (_HID, "80860F41")
+ Name (_UID, 2)
+ Name (_DDN, "I2C Controller #2")
+
+ /* Standard Mode: HCNT, LCNT, SDA Hold Time */
+ Name (SSCN, Package () { 0x200, 0x200, 0x6 })
+
+ /* Fast Mode: HCNT, LCNT, SDA Hold Time */
+ Name (FMCN, Package () { 0x55, 0x99, 0x6 })
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_I2C2_IRQ
+ }
+ FixedDMA (0x10, 0x0, Width32Bit, )
+ FixedDMA (0x11, 0x1, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S2B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S2EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, S2B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (I2C3)
+{
+ Name (_HID, "80860F41")
+ Name (_UID, 3)
+ Name (_DDN, "I2C Controller #3")
+
+ /* Standard Mode: HCNT, LCNT, SDA Hold Time */
+ Name (SSCN, Package () { 0x200, 0x200, 0x6 })
+
+ /* Fast Mode: HCNT, LCNT, SDA Hold Time */
+ Name (FMCN, Package () { 0x55, 0x99, 0x6 })
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_I2C3_IRQ
+ }
+ FixedDMA (0x10, 0x0, Width32Bit, )
+ FixedDMA (0x11, 0x1, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S3B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S3EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, S3B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (I2C4)
+{
+ Name (_HID, "80860F41")
+ Name (_UID, 4)
+ Name (_DDN, "I2C Controller #4")
+
+ /* Standard Mode: HCNT, LCNT, SDA Hold Time */
+ Name (SSCN, Package () { 0x200, 0x200, 0x6 })
+
+ /* Fast Mode: HCNT, LCNT, SDA Hold Time */
+ Name (FMCN, Package () { 0x55, 0x99, 0x6 })
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_I2C4_IRQ
+ }
+ FixedDMA (0x10, 0x0, Width32Bit, )
+ FixedDMA (0x11, 0x1, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S4B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S4EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, S4B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (I2C5)
+{
+ Name (_HID, "80860F41")
+ Name (_UID, 5)
+ Name (_DDN, "I2C Controller #5")
+
+ /* Standard Mode: HCNT, LCNT, SDA Hold Time */
+ Name (SSCN, Package () { 0x200, 0x200, 0x6 })
+
+ /* Fast Mode: HCNT, LCNT, SDA Hold Time */
+ Name (FMCN, Package () { 0x55, 0x99, 0x6 })
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_I2C5_IRQ
+ }
+ FixedDMA (0x10, 0x0, Width32Bit, )
+ FixedDMA (0x11, 0x1, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S5B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S5EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, S5B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (I2C6)
+{
+ Name (_HID, "80860F41")
+ Name (_UID, 6)
+ Name (_DDN, "I2C Controller #6")
+
+ /* Standard Mode: HCNT, LCNT, SDA Hold Time */
+ Name (SSCN, Package () { 0x200, 0x200, 0x6 })
+
+ /* Fast Mode: HCNT, LCNT, SDA Hold Time */
+ Name (FMCN, Package () { 0x55, 0x99, 0x6 })
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_I2C6_IRQ
+ }
+ FixedDMA (0x10, 0x0, Width32Bit, )
+ FixedDMA (0x11, 0x1, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S6B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S6EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, S6B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (I2C7)
+{
+ Name (_HID, "80860F41")
+ Name (_UID, 7)
+ Name (_DDN, "I2C Controller #7")
+
+ /* Standard Mode: HCNT, LCNT, SDA Hold Time */
+ Name (SSCN, Package () { 0x200, 0x200, 0x6 })
+
+ /* Fast Mode: HCNT, LCNT, SDA Hold Time */
+ Name (FMCN, Package () { 0x55, 0x99, 0x6 })
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_I2C7_IRQ
+ }
+ FixedDMA (0x10, 0x0, Width32Bit, )
+ FixedDMA (0x11, 0x1, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S7B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S7EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, S7B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (SPI1)
+{
+ Name (_HID, "80860F0E")
+ Name (_UID, 1)
+ Name (_DDN, "SPI Controller #2")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_SPI_IRQ
+ }
+ FixedDMA (0x0, 0x0, Width32Bit, )
+ FixedDMA (0x1, 0x1, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\S9B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S9EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, S9B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (PWM1)
+{
+ Name (_HID, "80860F09")
+ Name (_UID, 1)
+ Name (_DDN, "PWM Controller #1")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\SAB0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\SAEN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+}
+
+Device (PWM2)
+{
+ Name (_HID, "80860F09")
+ Name (_UID, 2)
+ Name (_DDN, "PWM Controller #2")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\SBB0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\SBEN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+}
+
+Device (UAR1)
+{
+ Name (_HID, "80860F0A")
+ Name (_UID, 1)
+ Name (_DDN, "HS-UART Controller #1")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_HSUART1_IRQ
+ }
+ FixedDMA (0x2, 0x2, Width32Bit, )
+ FixedDMA (0x3, 0x3, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\SCB0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\SCEN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, SCB1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (UAR2)
+{
+ Name (_HID, "80860F0A")
+ Name (_UID, 2)
+ Name (_DDN, "HS-UART Controller #2")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ LPSS_HSUART2_IRQ
+ }
+ FixedDMA (0x4, 0x4, Width32Bit, )
+ FixedDMA (0x5, 0x5, Width32Bit, )
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\SDB0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\SDEN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, SDB1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/platform.asl b/src/soc/intel/fsp_baytrail/acpi/platform.asl
new file mode 100644
index 0000000000..e0693928fa
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/platform.asl
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* The APM port can be used for generating software SMIs */
+
+OperationRegion (APMP, SystemIO, 0xb2, 2)
+Field (APMP, ByteAcc, NoLock, Preserve)
+{
+ APMC, 8, // APM command
+ APMS, 8 // APM status
+}
+
+/* Port 80 POST */
+
+OperationRegion (POST, SystemIO, 0x80, 1)
+Field (POST, ByteAcc, Lock, Preserve)
+{
+ DBG0, 8
+}
+
+/* SMI I/O Trap */
+Method(TRAP, 1, Serialized)
+{
+ Store (Arg0, SMIF) // SMI Function
+ Store (0, TRP0) // Generate trap
+ Return (SMIF) // Return value of SMI handler
+}
+
+/* The _PIC method is called by the OS to choose between interrupt
+ * routing via the i8259 interrupt controller or the APIC.
+ *
+ * _PIC is called with a parameter of 0 for i8259 configuration and
+ * with a parameter of 1 for Local Apic/IOAPIC configuration.
+ */
+
+Method(_PIC, 1)
+{
+ // Remember the OS' IRQ routing choice.
+ Store(Arg0, PICM)
+}
+
+/* The _PTS method (Prepare To Sleep) is called before the OS is
+ * entering a sleep state. The sleep state number is passed in Arg0
+ */
+
+Method(_PTS,1)
+{
+}
+
+/* The _WAK method is called on system wakeup */
+
+Method(_WAK,1)
+{
+ Return(Package(){0,0})
+}
+
diff --git a/src/soc/intel/fsp_baytrail/acpi/scc.asl b/src/soc/intel/fsp_baytrail/acpi/scc.asl
new file mode 100644
index 0000000000..7181fb1669
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/scc.asl
@@ -0,0 +1,187 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device (EMMC)
+{
+ Name (_HID, "80860F14")
+ Name (_CID, "PNP0D40")
+ Name (_UID, 1)
+ Name (_DDN, "eMMC Controller 4.5")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ SCC_EMMC_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\C0B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\C0EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, C0B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Device (EM45)
+ {
+ /* Slot 0, Function 8 */
+ Name (_ADR, 0x8)
+
+ Method (_RMV, 0, NotSerialized)
+ {
+ Return (0)
+ }
+ }
+}
+
+Device (SDIO)
+{
+ Name (_HID, "INT33BB")
+ Name (_CID, "PNP0D40")
+ Name (_UID, 2)
+ Name (_DDN, "SDIO Controller")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ SCC_SDIO_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\C1B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\C1EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, C1B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
+
+Device (SDCD)
+{
+ Name (_HID, "80860F16")
+ Name (_CID, "PNP0D40")
+ Name (_UID, 3)
+ Name (_DDN, "SD Card Controller")
+
+ Name (RBUF, ResourceTemplate()
+ {
+ Memory32Fixed (ReadWrite, 0, 0x1000, BAR0)
+ Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive,,,)
+ {
+ SCC_SD_IRQ
+ }
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^BAR0._BAS, RBAS)
+ Store (\C2B0, RBAS)
+ Return (^RBUF)
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\C2EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ OperationRegion (KEYS, SystemMemory, C2B1, 0x100)
+ Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
+ {
+ Offset (0x84),
+ PSAT, 32,
+ }
+
+ Method (_PS3)
+ {
+ Or (PSAT, 0x00000003, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+
+ Method (_PS0)
+ {
+ And (PSAT, 0xfffffffc, PSAT)
+ Or (PSAT, 0x00000000, PSAT)
+ }
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/sleepstates.asl b/src/soc/intel/fsp_baytrail/acpi/sleepstates.asl
new file mode 100644
index 0000000000..b21656cd6e
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/sleepstates.asl
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Name(\_S0, Package(){0x0,0x0,0x0,0x0})
+// Name(\_S1, Package(){0x1,0x1,0x0,0x0})
+Name(\_S4, Package(){0x6,0x6,0x0,0x0})
+Name(\_S5, Package(){0x7,0x7,0x0,0x0})
+
diff --git a/src/soc/intel/fsp_baytrail/acpi/southcluster.asl b/src/soc/intel/fsp_baytrail/acpi/southcluster.asl
new file mode 100644
index 0000000000..7136e142eb
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/southcluster.asl
@@ -0,0 +1,284 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <soc/intel/fsp_baytrail/baytrail/iomap.h>
+#include <soc/intel/fsp_baytrail/baytrail/irq.h>
+#include "../baytrail/baytrail.h"
+
+Scope(\)
+{
+ // IO-Trap at 0x800. This is the ACPI->SMI communication interface.
+
+ OperationRegion(IO_T, SystemIO, 0x800, 0x10)
+ Field(IO_T, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0x8),
+ TRP0, 8 // IO-Trap at 0x808
+ }
+
+ // Intel Legacy Block
+ OperationRegion(ILBS, SystemMemory, ILB_BASE_ADDRESS, ILB_BASE_SIZE)
+ Field (ILBS, AnyAcc, NoLock, Preserve)
+ {
+ Offset (0x8),
+ PRTA, 8,
+ PRTB, 8,
+ PRTC, 8,
+ PRTD, 8,
+ PRTE, 8,
+ PRTF, 8,
+ PRTG, 8,
+ PRTH, 8,
+ }
+}
+
+Name(_HID,EISAID("PNP0A08")) // PCIe
+Name(_CID,EISAID("PNP0A03")) // PCI
+
+Name(_ADR, 0)
+Name(_BBN, 0)
+
+Method (_CRS, 0, Serialized)
+{
+ Name (MCRS, ResourceTemplate()
+ {
+ // Bus Numbers
+ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+ 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00)
+
+ // IO Region 0
+ DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00)
+
+ // PCI Config Space
+ Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008)
+
+ // IO Region 1
+ DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01)
+
+ // VGA memory (0xa0000-0xbffff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000a0000, 0x000bffff, 0x00000000,
+ 0x00020000,,, ASEG)
+
+ // OPROM reserved (0xc0000-0xc3fff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000c0000, 0x000c3fff, 0x00000000,
+ 0x00004000,,, OPR0)
+
+ // OPROM reserved (0xc4000-0xc7fff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000c4000, 0x000c7fff, 0x00000000,
+ 0x00004000,,, OPR1)
+
+ // OPROM reserved (0xc8000-0xcbfff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000c8000, 0x000cbfff, 0x00000000,
+ 0x00004000,,, OPR2)
+
+ // OPROM reserved (0xcc000-0xcffff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000cc000, 0x000cffff, 0x00000000,
+ 0x00004000,,, OPR3)
+
+ // OPROM reserved (0xd0000-0xd3fff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000d0000, 0x000d3fff, 0x00000000,
+ 0x00004000,,, OPR4)
+
+ // OPROM reserved (0xd4000-0xd7fff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000d4000, 0x000d7fff, 0x00000000,
+ 0x00004000,,, OPR5)
+
+ // OPROM reserved (0xd8000-0xdbfff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000d8000, 0x000dbfff, 0x00000000,
+ 0x00004000,,, OPR6)
+
+ // OPROM reserved (0xdc000-0xdffff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000dc000, 0x000dffff, 0x00000000,
+ 0x00004000,,, OPR7)
+
+ // BIOS Extension (0xe0000-0xe3fff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000e0000, 0x000e3fff, 0x00000000,
+ 0x00004000,,, ESG0)
+
+ // BIOS Extension (0xe4000-0xe7fff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000e4000, 0x000e7fff, 0x00000000,
+ 0x00004000,,, ESG1)
+
+ // BIOS Extension (0xe8000-0xebfff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000e8000, 0x000ebfff, 0x00000000,
+ 0x00004000,,, ESG2)
+
+ // BIOS Extension (0xec000-0xeffff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000ec000, 0x000effff, 0x00000000,
+ 0x00004000,,, ESG3)
+
+ // System BIOS (0xf0000-0xfffff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0x000f0000, 0x000fffff, 0x00000000,
+ 0x00010000,,, FSEG)
+
+ // PCI Memory Region (Top of memory-0xfeafffff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0xfea00000, 0xfeafffff, 0x00000000,
+ 0x00100000,,, PMEM)
+
+ // TPM Area (0xfed40000-0xfed44fff)
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
+ Cacheable, ReadWrite,
+ 0x00000000, 0xfed40000, 0xfed44fff, 0x00000000,
+ 0x00005000,,, TPMR)
+ })
+
+ // Update PCI resource area
+ CreateDwordField(MCRS, PMEM._MIN, PMIN)
+ CreateDwordField(MCRS, PMEM._MAX, PMAX)
+ CreateDwordField(MCRS, PMEM._LEN, PLEN)
+
+ // TOLM is BMBOUND accessible from IOSF so is saved in NVS
+ Store (\TOLM, PMIN)
+ Add (Subtract (PMAX, PMIN), 1, PLEN)
+
+ Return (MCRS)
+}
+
+/* Device Resource Consumption */
+Device (PDRC)
+{
+ Name (_HID, EISAID("PNP0C02"))
+ Name (_UID, 1)
+
+ Name (PDRS, ResourceTemplate() {
+ Memory32Fixed(ReadWrite, ABORT_BASE_ADDRESS, ABORT_BASE_SIZE)
+ Memory32Fixed(ReadWrite, MCFG_BASE_ADDRESS, MCFG_BASE_SIZE)
+ Memory32Fixed(ReadWrite, PMC_BASE_ADDRESS, PMC_BASE_SIZE)
+ Memory32Fixed(ReadWrite, ILB_BASE_ADDRESS, ILB_BASE_SIZE)
+ Memory32Fixed(ReadWrite, SPI_BASE_ADDRESS, SPI_BASE_SIZE)
+ Memory32Fixed(ReadWrite, MPHY_BASE_ADDRESS, MPHY_BASE_SIZE)
+ Memory32Fixed(ReadWrite, PUNIT_BASE_ADDRESS, PUNIT_BASE_SIZE)
+ Memory32Fixed(ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE)
+ })
+
+ // Current Resource Settings
+ Method (_CRS, 0, Serialized)
+ {
+ Return(PDRS)
+ }
+}
+
+Method (_OSC, 4)
+{
+ /* Check for proper GUID */
+ If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
+ {
+ /* Let OS control everything */
+ Return (Arg3)
+ }
+ Else
+ {
+ /* Unrecognized UUID */
+ CreateDWordField (Arg3, 0, CDW1)
+ Or (CDW1, 4, CDW1)
+ Return (Arg3)
+ }
+}
+
+/* IOSF MBI Interface for kernel access */
+Device (IOSF)
+{
+ Name (_HID, "INT33BD")
+ Name (_CID, "INT33BD")
+ Name (_UID, 1)
+
+ Name (RBUF, ResourceTemplate ()
+ {
+ /* MCR / MDR / MCRX */
+ Memory32Fixed (ReadWrite, 0, 12, RBAR)
+ })
+
+ Method (_CRS)
+ {
+ CreateDwordField (^RBUF, ^RBAR._BAS, RBAS)
+ Store (Add (MCFG_BASE_ADDRESS, 0xD0), RBAS)
+ Return (^RBUF)
+ }
+}
+
+// LPC Bridge 0:1f.0
+#include "lpc.asl"
+
+#if INCLUDE_EHCI
+// USB EHCI 0:1d.0
+#include "usb.asl"
+#endif
+
+#if INCLUDE_XHCI
+// USB XHCI 0:14.0
+#include "xhci.asl"
+#endif
+
+// IRQ routing for each PCI device
+#include "irqroute.asl"
+
+Scope (\_SB)
+{
+ // GPIO Devices
+ #include "gpio.asl"
+
+#if INCLUDE_LPSS
+ // LPSS Devices
+ #include "lpss.asl"
+#endif
+
+#if INCLUDE_SCC
+ // SCC Devices
+ #include "scc.asl"
+#endif
+
+#if INCLUDE_LPE
+ // LPE Device
+ #include "lpe.asl"
+#endif
+}
diff --git a/src/soc/intel/fsp_baytrail/acpi/usb.asl b/src/soc/intel/fsp_baytrail/acpi/usb.asl
new file mode 100644
index 0000000000..ebc32ae59a
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/usb.asl
@@ -0,0 +1,54 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Intel Baytrail USB support */
+
+// EHCI Controller 0:1d.0
+
+Device (EHC1)
+{
+ Name(_ADR, 0x001d0000)
+
+ Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake
+
+ // Leave USB ports on for to allow Wake from USB
+
+ Method(_S3D,0) // Highest D State in S3 State
+ {
+ Return (2)
+ }
+
+ Method(_S4D,0) // Highest D State in S4 State
+ {
+ Return (2)
+ }
+
+ Device (HUB7)
+ {
+ Name (_ADR, 0x00000000)
+
+ Device (PRT1) { Name (_ADR, 1) } // USB Port 0
+ Device (PRT2) { Name (_ADR, 2) } // USB Port 1
+ Device (PRT3) { Name (_ADR, 3) } // USB Port 2
+ Device (PRT4) { Name (_ADR, 4) } // USB Port 3
+ }
+}
+
diff --git a/src/soc/intel/fsp_baytrail/acpi/xhci.asl b/src/soc/intel/fsp_baytrail/acpi/xhci.asl
new file mode 100644
index 0000000000..4d5367acec
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/acpi/xhci.asl
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Device (XHCI)
+{
+ Name (_ADR, 0x00140000)
+ Name (_PRW, Package () { 0x0d, 3 })
+ Name (_S3D, 3) /* Highest D state in S3 state */
+
+ Device (RHUB)
+ {
+ Name (_ADR, 0x00000000)
+ Device (PRT1) { Name (_ADR, 1) }
+ Device (PRT2) { Name (_ADR, 2) }
+ Device (PRT3) { Name (_ADR, 3) }
+ Device (PRT4) { Name (_ADR, 4) }
+ }
+}
diff --git a/src/soc/intel/fsp_baytrail/baytrail/acpi.h b/src/soc/intel/fsp_baytrail/baytrail/acpi.h
new file mode 100644
index 0000000000..d796873048
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/acpi.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_ACPI_H_
+#define _BAYTRAIL_ACPI_H_
+
+#include <arch/acpi.h>
+#include <baytrail/nvs.h>
+
+void acpi_create_intel_hpet(acpi_hpet_t * hpet);
+void acpi_create_serialio_ssdt(acpi_header_t *ssdt);
+void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt);
+unsigned long acpi_madt_irq_overrides(unsigned long current);
+void acpi_init_gnvs(global_nvs_t *gnvs);
+
+#endif /* _BAYTRAIL_ACPI_H_ */
+
diff --git a/src/soc/intel/fsp_baytrail/baytrail/baytrail.h b/src/soc/intel/fsp_baytrail/baytrail/baytrail.h
new file mode 100644
index 0000000000..d3a23770dd
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/baytrail.h
@@ -0,0 +1,74 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __SOC_INTEL_FSP_BAYTRAIL_BAYTRAIL_H__
+#define __SOC_INTEL_FSP_BAYTRAIL_BAYTRAIL_H__
+
+#define DEFAULT_ECBASE CONFIG_MMCONF_BASE_ADDRESS
+#define CPU_MICROCODE_CBFS_LEN 0x26000
+
+/* Southbridge internal device IO BARs (Set to match FSP settings) */
+#define SMBUS_IO_BASE 0xefa0
+#define SMBUS_SLAVE_ADDR 0x24
+#define DEFAULT_GPIOBASE 0x0500
+#define DEFAULT_ABASE 0x0400
+
+/* Southbridge internal device MEM BARs (Set to match FSP settings) */
+#define DEFAULT_IBASE 0xfed08000
+#define DEFAULT_PBASE 0xfed03000
+#define DEFAULT_RCBA 0xfed1c000
+
+/* Everything below this line is ignored in the DSDT */
+#ifndef __ACPI__
+
+/* Device 0:0.0 PCI configuration space (Host Bridge) */
+
+/* SOC types */
+#define SOC_TYPE_BAYTRAIL 0x0F1C
+
+#ifndef __ASSEMBLER__
+static inline void barrier(void) { asm("" ::: "memory"); }
+
+#define SKPAD 0xFC
+
+int bridge_silicon_revision(void);
+void rangeley_early_initialization(void);
+
+#ifndef __PRE_RAM__
+/* soc.c */
+int soc_silicon_revision(void);
+int soc_silicon_type(void);
+int soc_silicon_supported(int type, int rev);
+void soc_enable(device_t dev);
+
+/* debugging functions */
+void print_pci_devices(void);
+void dump_pci_device(unsigned dev);
+void dump_pci_devices(void);
+void dump_spd_registers(void);
+void dump_mem(unsigned start, unsigned end);
+void report_platform_info(void);
+
+#endif /* __PRE_RAM__ */
+#endif /* __ASSEMBLER__ */
+
+#endif /* __ACPI__ */
+#endif
diff --git a/src/soc/intel/fsp_baytrail/baytrail/device_nvs.h b/src/soc/intel/fsp_baytrail/baytrail/device_nvs.h
new file mode 100644
index 0000000000..a06ca70698
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/device_nvs.h
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_DEVICE_NVS_H_
+#define _BAYTRAIL_DEVICE_NVS_H_
+
+#include <stdint.h>
+
+/* Offset in Global NVS where this structure lives */
+#define DEVICE_NVS_OFFSET 0x1000
+
+#define LPSS_NVS_SIO_DMA1 0
+#define LPSS_NVS_I2C1 1
+#define LPSS_NVS_I2C2 2
+#define LPSS_NVS_I2C3 3
+#define LPSS_NVS_I2C4 4
+#define LPSS_NVS_I2C5 5
+#define LPSS_NVS_I2C6 6
+#define LPSS_NVS_I2C7 7
+#define LPSS_NVS_SIO_DMA2 8
+#define LPSS_NVS_SPI 9
+#define LPSS_NVS_PWM1 10
+#define LPSS_NVS_PWM2 11
+#define LPSS_NVS_HSUART1 12
+#define LPSS_NVS_HSUART2 13
+
+#define SCC_NVS_MMC 0
+#define SCC_NVS_SDIO 1
+#define SCC_NVS_SD 2
+
+typedef struct {
+ /* Device Enabled in ACPI Mode */
+ u8 lpss_en[14];
+ u8 scc_en[3];
+ u8 lpe_en;
+
+ /* BAR 0 */
+ u32 lpss_bar0[14];
+ u32 scc_bar0[3];
+ u32 lpe_bar0;
+
+ /* BAR 1 */
+ u32 lpss_bar1[14];
+ u32 scc_bar1[3];
+ u32 lpe_bar1;
+
+ /* Extra */
+ u32 lpe_fw; /* LPE Firmware */
+} __attribute__((packed)) device_nvs_t;
+
+#endif
diff --git a/src/soc/intel/fsp_baytrail/baytrail/ehci.h b/src/soc/intel/fsp_baytrail/baytrail/ehci.h
new file mode 100644
index 0000000000..a1edd6dffe
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/ehci.h
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef BAYTRAIL_EHCI_H
+#define BAYTRAIL_EHCI_H
+
+/* EHCI PCI Registers */
+#define EHCI_CMD_STS 0x04
+# define INTRDIS (1 << 10)
+#define EHCI_SBRN_FLA_PWC 0x60
+# define PORTWKIMP (1 << 16)
+# define PORTWKCAPMASK (0x3ff << 17)
+#define EHCI_USB2PDO 0x64
+
+/* EHCI Memory Registers */
+#define USB2CMD 0x20
+# define USB2CMD_ASE (1 << 5)
+# define USB2CMD_PSE (1 << 4)
+# define USB2CMD_HCRESET (1 << 1)
+# define USB2CMD_RS (1 << 0)
+#define USB2STS 0x24
+# define USB2STS_HCHALT (1 << 12)
+
+/* RCBA EHCI Registers */
+#define RCBA_FUNC_DIS 0x220
+# define RCBA_EHCI_DIS (1 << 0)
+
+#endif /* BAYTRAIL_EHCI_H */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/gfx.h b/src/soc/intel/fsp_baytrail/baytrail/gfx.h
new file mode 100644
index 0000000000..655615d37c
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/gfx.h
@@ -0,0 +1,48 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_GFX_H_
+#define _BAYTRAIL_GFX_H_
+
+/*
+ * PCI config registers.
+ */
+
+#define GGC 0x50
+# define GGC_VGA_DISABLE (1 << 1)
+# define GGC_GTT_SIZE_MASK (3 << 8)
+# define GGC_GTT_SIZE_0MB (0 << 8)
+# define GGC_GTT_SIZE_1MB (1 << 8)
+# define GGC_GTT_SIZE_2MB (2 << 8)
+# define GGC_GSM_SIZE_MASK (0x1f << 3)
+# define GGC_GSM_SIZE_0MB (0 << 3)
+# define GGC_GSM_SIZE_32MB (1 << 3)
+# define GGC_GSM_SIZE_64MB (2 << 3)
+# define GGC_GSM_SIZE_128MB (4 << 3)
+
+#define GSM_BASE 0x5c
+#define GTT_BASE 0x70
+
+#define MSAC 0x62
+#define APERTURE_SIZE_MASK (3 << 1)
+#define APERTURE_SIZE_128MB (0 << 1)
+#define APERTURE_SIZE_256MB (1 << 1)
+#define APERTURE_SIZE_512MB (3 << 1)
+
+#endif /* _BAYTRAIL_GFX_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/gpio.h b/src/soc/intel/fsp_baytrail/baytrail/gpio.h
new file mode 100644
index 0000000000..4c9e8a821d
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/gpio.h
@@ -0,0 +1,387 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_GPIO_H_
+#define _BAYTRAIL_GPIO_H_
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <baytrail/iomap.h>
+
+/* #define GPIO_DEBUG */
+
+/* Pad base, ex. PAD_CONF0[n]= PAD_BASE+16*n */
+#define GPSCORE_PAD_BASE (IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSCORE)
+#define GPNCORE_PAD_BASE (IO_BASE_ADDRESS + IO_BASE_OFFSET_GPNCORE)
+#define GPSSUS_PAD_BASE (IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSSUS)
+
+/* DIRQ registers start at pad base + 0x980 */
+#define PAD_BASE_DIRQ_OFFSET 0x980
+
+/* Pad register offset */
+#define PAD_CONF0_REG 0x0
+#define PAD_CONF1_REG 0x4
+#define PAD_VAL_REG 0x8
+
+/* Legacy IO register base */
+#define GPSCORE_LEGACY_BASE (GPIO_BASE_ADDRESS + 0x00)
+#define GPSSUS_LEGACY_BASE (GPIO_BASE_ADDRESS + 0x80)
+/* Some banks have no legacy GPIO interface */
+#define GP_LEGACY_BASE_NONE 0xFFFF
+
+#define LEGACY_USE_SEL_REG 0x00
+#define LEGACY_IO_SEL_REG 0x04
+#define LEGACY_GP_LVL_REG 0x08
+#define LEGACY_TPE_REG 0x0C
+#define LEGACY_TNE_REG 0x10
+#define LEGACY_TS_REG 0x14
+#define LEGACY_WAKE_EN_REG 0x18
+
+/* Number of GPIOs in each bank */
+#define GPNCORE_COUNT 27
+#define GPSCORE_COUNT 102
+#define GPSSUS_COUNT 44
+
+/* GPIO legacy IO register settings */
+#define GPIO_USE_MMIO 0
+#define GPIO_USE_LEGACY 1
+
+#define GPIO_DIR_OUTPUT 0
+#define GPIO_DIR_INPUT 1
+
+#define GPIO_LEVEL_LOW 0
+#define GPIO_LEVEL_HIGH 1
+
+#define GPIO_PEDGE_DISABLE 0
+#define GPIO_PEDGE_ENABLE 1
+
+#define GPIO_NEDGE_DISABLE 0
+#define GPIO_NEDGE_ENABLE 1
+
+/* config0[29] - Disable second mask */
+#define PAD_MASK2_DISABLE (1 << 29)
+
+/* config0[27] - Direct Irq En */
+#define PAD_IRQ_EN (1 << 27)
+
+/* config0[26] - gd_tne */
+#define PAD_TNE_IRQ (1 << 26)
+
+/* config0[25] - gd_tpe */
+#define PAD_TPE_IRQ (1 << 25)
+
+/* config0[24] - Gd Level */
+#define PAD_LEVEL_IRQ (1 << 24)
+#define PAD_EDGE_IRQ (0 << 24)
+
+/* config0[17] - Slow clkgate / glitch filter */
+#define PAD_SLOWGF_ENABLE (1 << 17)
+
+/* config0[16] - Fast clkgate / glitch filter */
+#define PAD_FASTGF_ENABLE (1 << 16)
+
+/* config0[15] - Hysteresis enable (inverted) */
+#define PAD_HYST_DISABLE (1 << 15)
+#define PAD_HYST_ENABLE (0 << 15)
+
+/* config0[14:13] - Hysteresis control */
+#define PAD_HYST_CTRL_DEFAULT (2 << 13)
+
+/* config0[11] - Bypass Flop */
+#define PAD_FLOP_BYPASS (1 << 11)
+#define PAD_FLOP_ENABLE (0 << 11)
+
+/* config0[10:9] - Pull str */
+#define PAD_PU_2K (0 << 9)
+#define PAD_PU_10K (1 << 9)
+#define PAD_PU_20K (2 << 9)
+#define PAD_PU_40K (3 << 9)
+
+/* config0[8:7] - Pull assign */
+#define PAD_PULL_DISABLE (0 << 7)
+#define PAD_PULL_UP (1 << 7)
+#define PAD_PULL_DOWN (2 << 7)
+
+/* config0[2:0] - Func. pin mux */
+#define PAD_FUNC0 0x0
+#define PAD_FUNC1 0x1
+#define PAD_FUNC2 0x2
+#define PAD_FUNC3 0x3
+#define PAD_FUNC4 0x4
+#define PAD_FUNC5 0x5
+#define PAD_FUNC6 0x6
+
+/* pad config0 power-on values - We will not often want to change these */
+#define PAD_CONFIG0_DEFAULT (PAD_MASK2_DISABLE | PAD_SLOWGF_ENABLE | \
+ PAD_FASTGF_ENABLE | PAD_HYST_DISABLE | \
+ PAD_HYST_CTRL_DEFAULT | PAD_FLOP_BYPASS)
+
+/* pad config1 reg power-on values - Shouldn't need to change this */
+#define PAD_CONFIG1_DEFAULT 0x8000
+
+/* pad_val[2] - Iinenb - active low */
+#define PAD_VAL_INPUT_DISABLE (1 << 2)
+#define PAD_VAL_INPUT_ENABLE (0 << 2)
+
+/* pad_val[1] - Ioutenb - active low */
+#define PAD_VAL_OUTPUT_DISABLE (1 << 1)
+#define PAD_VAL_OUTPUT_ENABLE (0 << 1)
+
+/* Input / Output state should usually be mutually exclusive */
+#define PAD_VAL_INPUT (PAD_VAL_INPUT_ENABLE | PAD_VAL_OUTPUT_DISABLE)
+#define PAD_VAL_OUTPUT (PAD_VAL_OUTPUT_ENABLE | PAD_VAL_INPUT_DISABLE)
+
+/* pad_val[0] - Value */
+#define PAD_VAL_HIGH (1 << 0)
+#define PAD_VAL_LOW (0 << 0)
+
+/* pad_val reg power-on default varies by pad, and apparently can cause issues
+ * if not set correctly, even if the pin isn't configured as GPIO. */
+#define PAD_VAL_DEFAULT PAD_VAL_INPUT
+
+/* Configure GPIOs as MMIO by default */
+#define GPIO_INPUT_PU_10K \
+ { .pad_conf0 = PAD_PU_10K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_MMIO, \
+ .is_gpio = 1 }
+
+#define GPIO_INPUT_PD_10K \
+ { .pad_conf0 = PAD_PU_10K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_MMIO, \
+ .is_gpio = 1 }
+
+#define GPIO_INPUT_NOPU \
+ { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_MMIO, \
+ .is_gpio = 1 }
+
+#define GPIO_INPUT_LEGACY_NOPU \
+ { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_LEGACY, \
+ .io_sel = GPIO_DIR_INPUT, \
+ .is_gpio = 1 }
+
+/* Direct / dedicated IRQ input - pass signal directly to apic */
+#define GPIO_DIRQ \
+ { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
+ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_LEVEL_IRQ, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, }
+
+
+#define GPIO_OUT_LOW \
+ { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_OUTPUT | PAD_VAL_LOW, \
+ .use_sel = GPIO_USE_LEGACY, \
+ .io_sel = GPIO_DIR_OUTPUT, \
+ .gp_lvl = GPIO_LEVEL_LOW, \
+ .is_gpio = 1 }
+
+#define GPIO_OUT_HIGH \
+ { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_OUTPUT | PAD_VAL_HIGH, \
+ .use_sel = GPIO_USE_LEGACY, \
+ .io_sel = GPIO_DIR_OUTPUT, \
+ .gp_lvl = GPIO_LEVEL_HIGH, \
+ .is_gpio = 1 }
+
+/* Define no-pull / PU / PD configs for each functional config option */
+#define GPIO_FUNC(_func, _pudir, _str) \
+ { .use_sel = GPIO_USE_MMIO, \
+ .pad_conf0 = PAD_FUNC##_func | PAD_##_pudir | PAD_PU_##_str | \
+ PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_DEFAULT }
+
+/* Default functional configs -- no PU */
+#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 10K)
+#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 10K)
+#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 10K)
+#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 10K)
+#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 10K)
+#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 10K)
+#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 10K)
+
+/* ACPI GPIO routing. Assume everything is externally pulled and negative edge
+ * triggered. SCI implies WAKE, but WAKE doesn't imply SCI. */
+#define GPIO_ACPI_SCI \
+ { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_LEGACY, \
+ .io_sel = GPIO_DIR_INPUT, \
+ .tne = 1, \
+ .sci = 1, \
+ .wake_en = 1, }
+#define GPIO_ACPI_WAKE \
+ { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_LEGACY, \
+ .io_sel = GPIO_DIR_INPUT, \
+ .tne = 1, \
+ .wake_en = 1, }
+#define GPIO_ACPI_SMI \
+ { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_LEGACY, \
+ .io_sel = GPIO_DIR_INPUT, \
+ .tne = 1, \
+ .smi = 1}
+
+/* End marker */
+#define GPIO_LIST_END 0xffffffff
+
+#define GPIO_END \
+ { .pad_conf0 = GPIO_LIST_END }
+
+/* Common default GPIO settings */
+#define GPIO_INPUT GPIO_INPUT_NOPU
+#define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU
+#define GPIO_INPUT_PU GPIO_INPUT_PU_10K
+#define GPIO_INPUT_PD GPIO_INPUT_PD_10K
+#define GPIO_NC GPIO_INPUT_PU_10K
+#define GPIO_DEFAULT GPIO_FUNC0
+
+/* 16 DirectIRQs per supported bank */
+#define GPIO_MAX_DIRQS 16
+
+/* Most pins are GPIO function 0. Some banks have a range of pins with GPIO
+ * function 1. Indicate first / last GPIOs with function 1. */
+#define GPIO_NONE 255
+/* All NCORE GPIOs are function 0 */
+#define GPNCORE_GPIO_F1_RANGE_START GPIO_NONE
+#define GPNCORE_GPIO_F1_RANGE_END GPIO_NONE
+/* SCORE GPIO [92:93] are function 1 */
+#define GPSCORE_GPIO_F1_RANGE_START 92
+#define GPSCORE_GPIO_F1_RANGE_END 93
+/* SSUS GPIO [11:21] are function 1 */
+#define GPSSUS_GPIO_F1_RANGE_START 11
+#define GPSSUS_GPIO_F1_RANGE_END 21
+
+struct soc_gpio_map {
+ u32 pad_conf0;
+ u32 pad_conf1;
+ u32 pad_val;
+ u32 use_sel : 1;
+ u32 io_sel : 1;
+ u32 gp_lvl : 1;
+ u32 tpe : 1;
+ u32 tne : 1;
+ u32 wake_en : 1;
+ u32 smi : 1;
+ u32 is_gpio : 1;
+ u32 sci : 1;
+} __attribute__ ((packed));
+
+struct soc_gpio_config {
+ const struct soc_gpio_map *ncore;
+ const struct soc_gpio_map *score;
+ const struct soc_gpio_map *ssus;
+ const u8 (*core_dirq)[GPIO_MAX_DIRQS];
+ const u8 (*sus_dirq)[GPIO_MAX_DIRQS];
+};
+
+/* Description of GPIO 'bank' ex. {ncore, score. ssus} */
+struct gpio_bank {
+ const int gpio_count;
+ const u8* gpio_to_pad;
+ const int legacy_base;
+ const unsigned long pad_base;
+ const u8 has_wake_en :1;
+ const u8 gpio_f1_range_start;
+ const u8 gpio_f1_range_end;
+};
+
+void setup_soc_gpios(struct soc_gpio_config *config);
+/* This function is weak and can be overridden by a mainboard function. */
+struct soc_gpio_config* mainboard_get_gpios(void);
+
+/* Functions / defines for changing GPIOs in romstage */
+/* SCORE Pad definitions. */
+#define UART_RXD_PAD 82
+#define UART_TXD_PAD 83
+#define PCU_SMB_CLK_PAD 88
+#define PCU_SMB_DATA_PAD 90
+
+static inline unsigned int score_pconf0(int pad_num)
+{
+ return GPSCORE_PAD_BASE + pad_num * 16;
+}
+
+static inline unsigned int ssus_pconf0(int pad_num)
+{
+ return GPSSUS_PAD_BASE + pad_num * 16;
+}
+
+static inline void score_select_func(int pad, int func)
+{
+ uint32_t reg;
+ uint32_t pconf0_addr = score_pconf0(pad);
+
+ reg = read32(pconf0_addr);
+ reg &= ~0x7;
+ reg |= func & 0x7;
+ write32(pconf0_addr, reg);
+}
+
+static inline void ssus_select_func(int pad, int func)
+{
+ uint32_t reg;
+ uint32_t pconf0_addr = ssus_pconf0(pad);
+
+ reg = read32(pconf0_addr);
+ reg &= ~0x7;
+ reg |= func & 0x7;
+ write32(pconf0_addr, reg);
+}
+
+/* These functions require that the input pad be configured as an input GPIO */
+static inline int score_get_gpio(int pad)
+{
+ uint32_t val_addr = score_pconf0(pad) + PAD_VAL_REG;
+
+ return read32(val_addr) & PAD_VAL_HIGH;
+}
+
+static inline int ssus_get_gpio(int pad)
+{
+ uint32_t val_addr = ssus_pconf0(pad) + PAD_VAL_REG;
+
+ return read32(val_addr) & PAD_VAL_HIGH;
+}
+
+static inline void ssus_disable_internal_pull(int pad)
+{
+ const uint32_t pull_mask = ~(0xf << 7);
+ write32(ssus_pconf0(pad), read32(ssus_pconf0(pad)) & pull_mask);
+}
+
+#endif /* _BAYTRAIL_GPIO_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/iomap.h b/src/soc/intel/fsp_baytrail/baytrail/iomap.h
new file mode 100644
index 0000000000..867484b178
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/iomap.h
@@ -0,0 +1,90 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_IOMAP_H_
+#define _BAYTRAIL_IOMAP_H_
+
+
+/*
+ * Memory Mapped IO bases.
+ */
+
+/* PCI Configuration Space */
+#define MCFG_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS
+#define MCFG_BASE_SIZE 0x10000000
+
+/* Transactions in this range will abort */
+#define ABORT_BASE_ADDRESS 0xfeb00000
+#define ABORT_BASE_SIZE 0x00100000
+
+/* Power Management Controller */
+#define PMC_BASE_ADDRESS 0xfed03000
+#define PMC_BASE_SIZE 0x400
+
+/* IO Memory */
+#define IO_BASE_ADDRESS 0xfed0c000
+#define IO_BASE_OFFSET_GPSCORE 0x0000
+#define IO_BASE_OFFSET_GPNCORE 0x1000
+#define IO_BASE_OFFSET_GPSSUS 0x2000
+#define IO_BASE_SIZE 0x4000
+
+/* Intel Legacy Block */
+#define ILB_BASE_ADDRESS 0xfed08000
+#define ILB_BASE_SIZE 0x400
+
+/* SPI Bus */
+#define SPI_BASE_ADDRESS 0xfed01000
+#define SPI_BASE_SIZE 0x400
+
+/* MODPHY */
+#define MPHY_BASE_ADDRESS 0xfef00000
+#define MPHY_BASE_SIZE 0x100000
+
+/* Power Management Unit */
+#define PUNIT_BASE_ADDRESS 0xfed05000
+#define PUNIT_BASE_SIZE 0x800
+
+/* Root Complex Base Address */
+#define RCBA_BASE_ADDRESS 0xfed1c000
+#define RCBA_BASE_SIZE 0x400
+
+/* High Performance Event Timer */
+#define HPET_BASE_ADDRESS 0xfed00000
+#define HPET_BASE_SIZE 0x400
+
+/* Temporary Base Address */
+#define TEMP_BASE_ADDRESS 0xfd000000
+
+/*
+ * IO Port bases.
+ */
+#define ACPI_BASE_ADDRESS 0x0400
+#define ACPI_BASE_SIZE 0x80
+
+#define GPIO_BASE_ADDRESS 0x0500
+#define GPIO_BASE_SIZE 0x100
+
+#define SMBUS_BASE_ADDRESS 0xefa0
+
+#ifndef __ACPI__
+/* Read Top of Low Memory (BMBOUND) */
+uint32_t nc_read_top_of_low_memory(void);
+#endif
+
+#endif /* _BAYTRAIL_IOMAP_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/iosf.h b/src/soc/intel/fsp_baytrail/baytrail/iosf.h
new file mode 100644
index 0000000000..8fd1e24384
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/iosf.h
@@ -0,0 +1,195 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_IOSF_H_
+#define _BAYTRAIL_IOSF_H_
+
+#include <stdint.h>
+#include <baytrail/pci_devs.h>
+
+/*
+ * The Bay Trail SoC has a message network called IOSF Sideband. The access
+ * routines are through 3 registers in PCI config space of 00:00.0:
+ * MCR - control register
+ * MDR - data register
+ * MCRX - control register extension
+ * The extension register is only used for addresses that don't fit into the
+ * 8 bit register address.
+ */
+
+#ifndef PCI_DEV
+#define PCI_DEV(SEGBUS, DEV, FN) ( \
+ (((SEGBUS) & 0xFFF) << 20) | \
+ (((DEV) & 0x1F) << 15) | \
+ (((FN) & 0x07) << 12))
+#endif
+#define IOSF_PCI_DEV PCI_DEV(0,SOC_DEV,SOC_FUNC)
+
+#define MCR_REG 0xd0
+#define IOSF_OPCODE(x) ((x) << 24)
+#define IOSF_PORT(x) ((0xff & (x)) << 16)
+#define IOSF_REG(x) ((0xff & (x)) << 8)
+#define IOSF_REG_UPPER(x) (((~0xff) & (x)))
+#define IOSF_BYTE_EN_0 0x10
+#define IOSF_BYTE_EN_1 0x20
+#define IOSF_BYTE_EN_2 0x40
+#define IOSF_BYTE_EN_3 0x80
+#define IOSF_BYTE_EN \
+ (IOSF_BYTE_EN_0 | IOSF_BYTE_EN_1 | IOSF_BYTE_EN_2 | IOSF_BYTE_EN_3)
+#define MDR_REG 0xd4
+#define MCRX_REG 0xd8
+
+uint32_t iosf_bunit_read(int reg);
+void iosf_bunit_write(int reg, uint32_t val);
+uint32_t iosf_dunit_read(int reg);
+void iosf_dunit_write(int reg, uint32_t val);
+/* Some registers are per channel while the gloals live in dunit 0 */
+uint32_t iosf_dunit_ch0_read(int reg);
+uint32_t iosf_dunit_ch1_read(int reg);
+uint32_t iosf_punit_read(int reg);
+uint32_t iosf_lpss_read(int reg);
+void iosf_lpss_write(int reg, uint32_t val);
+
+/* IOSF ports. */
+#define IOSF_PORT_AUNIT 0x00 /* IO Arbiter unit */
+#define IOSF_PORT_SYSMEMC 0x01 /* System Memory Controller */
+#define IOSF_PORT_BUNIT 0x03 /* System Memroy Arbiter/Bunit */
+#define IOSF_PORT_DUNIT_CH1 0x07 /* DUNIT Channel 1 */
+#define IOSF_PORT_USBPHY 0x43 /* USB PHY */
+#define IOSF_PORT_USHPHY 0x61 /* USB XHCI PHY */
+#define IOSF_PORT_LPSS 0xa0 /* LPSS - Low Power Subsystem */
+
+/* Read and write opcodes differ per port. */
+#define IOSF_OP_READ_SYSMEMC 0x10
+#define IOSF_OP_WRITE_SYSMEMC (IOSF_OP_READ_SYSMEMC | 1)
+#define IOSF_OP_READ_BUNIT 0x10
+#define IOSF_OP_WRITE_BUNIT (IOSF_OP_READ_BUNIT | 1)
+#define IOSF_OP_READ_LPSS 0x06
+#define IOSF_OP_WRITE_LPSS (IOSF_OP_READ_LPSS | 1)
+
+/*
+ * BUNIT Registers.
+ */
+
+#define BNOCACHE 0x23
+/* BMBOUND has a 128MiB granularity. Highest address is 0xf8000000. */
+#define BUNIT_BMBOUND 0x25
+/* BMBOUND_HI describes the available ram above 4GiB. It has a
+ * 256MiB granularity. Physical address bits 35:28 are compared with 31:24
+ * bits in the BMBOUND_HI register. Also note that since BMBOUND has 128MiB
+ * granularity care needs to be taken with the e820 map to account for a hole
+ * in the ram. */
+#define BUNIT_BMBOUND_HI 0x26
+#define BUNIT_MMCONF_REG 0x27
+/* The SMMRR registers define the SMM region in MiB granularity. */
+#define BUNIT_SMRRL 0x2e
+#define BUNIT_SMRRH 0x2f
+# define BUNIT_SMRR_ENABLE (1 << 31)
+
+/*
+ * DUNIT Registers.
+ */
+
+#define DRP 0x00
+# define DRP_DIMM0_RANK0_EN (0x01 << 0)
+# define DRP_DIMM0_RANK1_EN (0x01 << 1)
+# define DRP_DIMM1_RANK0_EN (0x01 << 2)
+# define DRP_DIMM1_RANK1_EN (0x01 << 3)
+# define DRP_RANK_MASK (DRP_DIMM0_RANK0_EN | DRP_DIMM0_RANK1_EN | \
+ DRP_DIMM1_RANK0_EN | DRP_DIMM1_RANK1_EN)
+#define DTR0 0x01
+# define DTR0_SPEED_MASK 0x03
+# define DTR0_SPEED_800 0x00
+# define DTR0_SPEED_1066 0x01
+# define DTR0_SPEED_1333 0x02
+# define DTR0_SPEED_1600 0x03
+
+
+/*
+ * LPSS Registers
+ */
+#define LPSS_SIO_DMA1_CTL 0x280
+#define LPSS_I2C1_CTL 0x288
+#define LPSS_I2C2_CTL 0x290
+#define LPSS_I2C3_CTL 0x298
+#define LPSS_I2C4_CTL 0x2a0
+#define LPSS_I2C5_CTL 0x2a8
+#define LPSS_I2C6_CTL 0x2b0
+#define LPSS_I2C7_CTL 0x2b8
+#define LPSS_SIO_DMA2_CTL 0x240
+#define LPSS_PWM1_CTL 0x248
+#define LPSS_PWM2_CTL 0x250
+#define LPSS_HSUART1_CTL 0x258
+#define LPSS_HSUART2_CTL 0x260
+#define LPSS_SPI_CTL 0x268
+# define LPSS_CTL_ACPI_INT_EN (1 << 21)
+# define LPSS_CTL_PCI_CFG_DIS (1 << 20)
+# define LPSS_CTL_SNOOP (1 << 18)
+# define LPSS_CTL_NOSNOOP (1 << 19)
+# define LPSS_CTL_PM_CAP_PRSNT (1 << 1)
+
+/*
+ * SCC Registers
+ */
+#define SCC_SD_CTL 0x504
+#define SCC_SDIO_CTL 0x508
+#define SCC_MMC_CTL 0x50c
+# define SCC_CTL_PCI_CFG_DIS (1 << 0)
+# define SCC_CTL_ACPI_INT_EN (1 << 1)
+
+/*
+ * CCU Registers
+ */
+
+#define PLT_CLK_CTRL_0 0x3c
+#define PLT_CLK_CTRL_1 0x40
+#define PLT_CLK_CTRL_2 0x44
+#define PLT_CLK_CTRL_3 0x48
+#define PLT_CLK_CTRL_4 0x4c
+#define PLT_CLK_CTRL_5 0x50
+# define PLT_CLK_CTRL_19P2MHZ_FREQ (0 << 1)
+# define PLT_CLK_CTRL_25MHZ_FREQ (1 << 1)
+# define PLT_CLK_CTRL_SELECT_FREQ (1 << 0)
+
+/*
+ * USBPHY Registers
+ */
+#define USBPHY_COMPBG 0x7f04
+#define USBPHY_PER_PORT_LANE0 0x4100
+#define USBPHY_PER_PORT_RCOMP_HS_PULLUP0 0x4122
+#define USBPHY_PER_PORT_LANE1 0x4200
+#define USBPHY_PER_PORT_RCOMP_HS_PULLUP1 0x4222
+#define USBPHY_PER_PORT_LANE2 0x4300
+#define USBPHY_PER_PORT_RCOMP_HS_PULLUP2 0x4322
+#define USBPHY_PER_PORT_LANE3 0x4400
+#define USBPHY_PER_PORT_RCOMP_HS_PULLUP3 0x4422
+
+/*
+ * USHPHY Registers
+ */
+#define USHPHY_CDN_PLL_CONTROL 0x03c0
+#define USHPHY_CDN_VCO_START_CAL_POINT 0x0054
+#define USHPHY_CCDRLF 0x8040
+#define USHPHY_PEAKING_AMP_CONFIG_DIAG 0x80a8
+#define USHPHY_OFFSET_COR_CONFIG_DIAG 0x80b0
+#define USHPHY_VGA_GAIN_CONFIG_DIAG 0x8080
+#define USHPHY_REE_DAC_CONTROL 0x80b8
+#define USHPHY_CDN_U1_POWER_STATE_DEF 0x0000
+
+#endif /* _BAYTRAIL_IOSF_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/irq.h b/src/soc/intel/fsp_baytrail/baytrail/irq.h
new file mode 100644
index 0000000000..98ca116c57
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/irq.h
@@ -0,0 +1,165 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_IRQ_H_
+#define _BAYTRAIL_IRQ_H_
+
+#define PIRQA_APIC_IRQ 16
+#define PIRQB_APIC_IRQ 17
+#define PIRQC_APIC_IRQ 18
+#define PIRQD_APIC_IRQ 19
+#define PIRQE_APIC_IRQ 20
+#define PIRQF_APIC_IRQ 21
+#define PIRQG_APIC_IRQ 22
+#define PIRQH_APIC_IRQ 23
+/* The below IRQs are for when devices are in ACPI mode. Active low. */
+#define LPE_DMA0_IRQ 24
+#define LPE_DMA1_IRQ 25
+#define LPE_SSP0_IRQ 26
+#define LPE_SSP1_IRQ 27
+#define LPE_SSP2_IRQ 28
+#define LPE_IPC2HOST_IRQ 29
+#define LPSS_I2C1_IRQ 32
+#define LPSS_I2C2_IRQ 33
+#define LPSS_I2C3_IRQ 34
+#define LPSS_I2C4_IRQ 35
+#define LPSS_I2C5_IRQ 36
+#define LPSS_I2C6_IRQ 37
+#define LPSS_I2C7_IRQ 38
+#define LPSS_HSUART1_IRQ 39
+#define LPSS_HSUART2_IRQ 40
+#define LPSS_SPI_IRQ 41
+#define LPSS_DMA1_IRQ 42
+#define LPSS_DMA2_IRQ 43
+#define SCC_EMMC_IRQ 44
+#define SCC_SDIO_IRQ 46
+#define SCC_SD_IRQ 47
+#define GPIO_NC_IRQ 48
+#define GPIO_SC_IRQ 49
+#define GPIO_SUS_IRQ 50
+/* GPIO direct / dedicated IRQs. */
+#define GPIO_S0_DED_IRQ_0 51
+#define GPIO_S0_DED_IRQ_1 52
+#define GPIO_S0_DED_IRQ_2 53
+#define GPIO_S0_DED_IRQ_3 54
+#define GPIO_S0_DED_IRQ_4 55
+#define GPIO_S0_DED_IRQ_5 56
+#define GPIO_S0_DED_IRQ_6 57
+#define GPIO_S0_DED_IRQ_7 58
+#define GPIO_S0_DED_IRQ_8 59
+#define GPIO_S0_DED_IRQ_9 60
+#define GPIO_S0_DED_IRQ_10 61
+#define GPIO_S0_DED_IRQ_11 62
+#define GPIO_S0_DED_IRQ_12 63
+#define GPIO_S0_DED_IRQ_13 64
+#define GPIO_S0_DED_IRQ_14 65
+#define GPIO_S0_DED_IRQ_15 66
+#define GPIO_S5_DED_IRQ_0 67
+#define GPIO_S5_DED_IRQ_1 68
+#define GPIO_S5_DED_IRQ_2 69
+#define GPIO_S5_DED_IRQ_3 70
+#define GPIO_S5_DED_IRQ_4 71
+#define GPIO_S5_DED_IRQ_5 72
+#define GPIO_S5_DED_IRQ_6 73
+#define GPIO_S5_DED_IRQ_7 74
+#define GPIO_S5_DED_IRQ_8 75
+#define GPIO_S5_DED_IRQ_9 76
+#define GPIO_S5_DED_IRQ_10 77
+#define GPIO_S5_DED_IRQ_11 78
+#define GPIO_S5_DED_IRQ_12 79
+#define GPIO_S5_DED_IRQ_13 80
+#define GPIO_S5_DED_IRQ_14 81
+#define GPIO_S5_DED_IRQ_15 82
+/* DIRQs - Two levels of expansion to evaluate to numeric constants for ASL. */
+#define _GPIO_S0_DED_IRQ(slot) GPIO_S0_DED_IRQ_##slot
+#define _GPIO_S5_DED_IRQ(slot) GPIO_S5_DED_IRQ_##slot
+#define GPIO_S0_DED_IRQ(slot) _GPIO_S0_DED_IRQ(slot)
+#define GPIO_S5_DED_IRQ(slot) _GPIO_S5_DED_IRQ(slot)
+
+/* PIC IRQ settings. */
+#define PIRQ_PIC_IRQ3 0x3
+#define PIRQ_PIC_IRQ4 0x4
+#define PIRQ_PIC_IRQ5 0x5
+#define PIRQ_PIC_IRQ6 0x6
+#define PIRQ_PIC_IRQ7 0x7
+#define PIRQ_PIC_IRQ9 0x9
+#define PIRQ_PIC_IRQ10 0xa
+#define PIRQ_PIC_IRQ11 0xb
+#define PIRQ_PIC_IRQ12 0xc
+#define PIRQ_PIC_IRQ14 0xe
+#define PIRQ_PIC_IRQ15 0xf
+#define PIRQ_PIC_IRQDISABLE 0x80
+#define PIRQ_PIC_UNKNOWN_UNUSED 0xff
+
+/* Overloaded term, but these values determine the per device route. */
+#define PIRQA 0
+#define PIRQB 1
+#define PIRQC 2
+#define PIRQD 3
+#define PIRQE 4
+#define PIRQF 5
+#define PIRQG 6
+#define PIRQH 7
+
+/* These registers live behind the ILB_BASE_ADDRESS */
+#define ACTL 0x00
+# define SCIS_MASK 0x07
+# define SCIS_IRQ9 0x00
+# define SCIS_IRQ10 0x01
+# define SCIS_IRQ11 0x02
+# define SCIS_IRQ20 0x04
+# define SCIS_IRQ21 0x05
+# define SCIS_IRQ22 0x06
+# define SCIS_IRQ23 0x07
+
+/* In each mainboard directory there should exist a header file irqroute.h that
+ * defines the PCI_DEV_PIRQ_ROUTES and PIRQ_PIC_ROUTES macros which
+ * consist of PCI_DEV_PIRQ_ROUTE and PIRQ_PIC entries. */
+
+#if !defined(__ASSEMBLER__) && !defined(__ACPI__)
+#include <stdint.h>
+
+#define NUM_OF_PCI_DEVS 32
+#define NUM_PIRQS 8
+
+struct baytrail_irq_route {
+ /* Per device configuration. */
+ uint16_t pcidev[NUM_OF_PCI_DEVS];
+ /* Route path for each internal PIRQx in PIC mode. */
+ uint8_t pic[NUM_PIRQS];
+};
+
+extern const struct baytrail_irq_route global_baytrail_irq_route;
+
+#define DEFINE_IRQ_ROUTES \
+ const struct baytrail_irq_route global_baytrail_irq_route = { \
+ .pcidev = { PCI_DEV_PIRQ_ROUTES, }, \
+ .pic = { PIRQ_PIC_ROUTES, }, \
+ }
+
+#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \
+ [dev_] = ((PIRQ ## d_) << 12) | ((PIRQ ## c_) << 8) | \
+ ((PIRQ ## b_) << 4) | ((PIRQ ## a_) << 0)
+
+#define PIRQ_PIC(pirq_, pic_irq_) \
+ [PIRQ ## pirq_] = PIRQ_PIC_IRQ ## pic_irq_
+
+#endif /* !defined(__ASSEMBLER__) && !defined(__ACPI__) */
+
+#endif /* _BAYTRAIL_IRQ_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/lpc.h b/src/soc/intel/fsp_baytrail/baytrail/lpc.h
new file mode 100644
index 0000000000..9dd0439304
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/lpc.h
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_LPC_H_
+#define _BAYTRAIL_LPC_H_
+
+#define FADT_SOC_LPC_DEV 0, PCI_DEVFN(0x1f,0)
+
+/* PCI config registers in LPC bridge. */
+#define REVID 0x08
+#define ABASE 0x40 /* IO BAR */
+#define PBASE 0x44 /* MEM BAR */
+#define GBASE 0x48 /* IO BAR */
+#define IOBASE 0x4c /* MEM BAR */
+#define IBASE 0x50 /* MEM BAR */
+#define SBASE 0x54 /* MEM BAR */
+#define MPBASE 0x58 /* MEM BAR */
+#define PUBASE 0x5c
+#define SET_BAR_ENABLE 0x02
+#define UART_CONT 0x80
+#define RCBA 0xf0
+#define RCBA_ENABLE 0x01
+
+#define ILB_ACTL 0
+#define ILB_MC 0x4
+#define ILB_PIRQA_ROUT 0x8
+#define ILB_PIRQB_ROUT 0x9
+#define ILB_PIRQC_ROUT 0xA
+#define ILB_PIRQD_ROUT 0xB
+#define ILB_PIRQE_ROUT 0xC
+#define ILB_PIRQF_ROUT 0xD
+#define ILB_PIRQG_ROUT 0xE
+#define ILB_PIRQH_ROUT 0xF
+#define ILB_SERIRQ_CNTL 0x10
+#define SCNT_CONTINUOUS_MODE (1 << 7)
+#define SCNT_QUIET_MODE 0
+#define ILB_IR00 0x20
+#define ILB_IR01 0x22
+#define ILB_IR02 0x24
+#define ILB_IR03 0x26
+#define ILB_IR04 0x28
+#define ILB_IR05 0x2A
+#define ILB_IR06 0x2C
+#define ILB_IR07 0x2E
+#define ILB_IR08 0x30
+#define ILB_IR09 0x32
+#define ILB_IR10 0x34
+#define ILB_IR11 0x36
+#define ILB_IR12 0x38
+#define ILB_IR13 0x3A
+#define ILB_IR14 0x3C
+#define ILB_IR15 0x3E
+#define ILB_IR16 0x40
+#define ILB_IR17 0x42
+#define ILB_IR18 0x44
+#define ILB_IR19 0x46
+#define ILB_IR20 0x48
+#define ILB_IR21 0x4A
+#define ILB_IR22 0x4C
+#define ILB_IR23 0x4E
+#define ILB_IR24 0x50
+#define ILB_IR25 0x52
+#define ILB_IR26 0x54
+#define ILB_IR27 0x56
+#define ILB_IR28 0x58
+#define ILB_IR29 0x5A
+#define ILB_IR30 0x5C
+#define ILB_IR31 0x5E
+#define ILB_OIC 0x60
+#define SIRQEN (1 << 12)
+#define AEN (1 << 8)
+
+#define RID_A_STEPPING_START 1
+#define RID_B_STEPPING_START 5
+#define RID_C_STEPPING_START 0xe
+enum baytrail_stepping {
+ STEP_A0,
+ STEP_A1,
+ STEP_B0,
+ STEP_B1,
+ STEP_B2,
+ STEP_B3,
+ STEP_C0,
+};
+
+/* Registers behind the RCBA_BASE_ADDRESS bar. */
+#define GCS 0x00
+# define BILD (1 << 0)
+
+/* Default IO range claimed by the LPC devices. The upper bound is exclusive. */
+#define LPC_DEFAULT_IO_RANGE_LOWER 0
+#define LPC_DEFAULT_IO_RANGE_UPPER 0x1000
+#define IO_APIC_RANGE_SIZE 0x1000
+
+#endif /* _BAYTRAIL_LPC_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/msr.h b/src/soc/intel/fsp_baytrail/baytrail/msr.h
new file mode 100644
index 0000000000..882346c2ad
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/msr.h
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_MSR_H_
+#define _BAYTRAIL_MSR_H_
+
+#define MSR_IA32_PLATFORM_ID 0x17
+#define MSR_BSEL_CR_OVERCLOCK_CONTROL 0xcd
+#define MSR_PLATFORM_INFO 0xce
+#define MSR_PMG_CST_CONFIG_CONTROL 0xe2
+#define MSR_POWER_MISC 0x120
+#define MSR_IA32_PERF_CTL 0x199
+#define MSR_IA32_MISC_ENABLES 0x1a0
+#define MSR_POWER_CTL 0x1fc
+#define MSR_PKG_POWER_SKU_UNIT 0x606
+#define MSR_PKG_POWER_LIMIT 0x610
+#define MSR_IACORE_RATIOS 0x66a
+#define MSR_IACORE_TURBO_RATIOS 0x66c
+#define MSR_IACORE_VIDS 0x66b
+#define MSR_IACORE_TURBO_VIDS 0x66d
+
+/* Read BCLK from MSR */
+unsigned bus_freq_khz(void);
+
+#endif /* _BAYTRAIL_MSR_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/nvm.h b/src/soc/intel/fsp_baytrail/baytrail/nvm.h
new file mode 100644
index 0000000000..d0cbf7b0e6
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/nvm.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _NVM_H_
+#define _NVM_H_
+
+#include <stddef.h>
+
+/* Determine if area is erased. returns 1 if erased. 0 otherwise. */
+int nvm_is_erased(const void *start, size_t size);
+
+/* Erase region according to start and size. Returns < 0 on error else 0. */
+int nvm_erase(void *start, size_t size);
+
+/* Write data to NVM. Returns 0 on success < 0 on error. */
+int nvm_write(void *start, const void *data, size_t size);
+
+#endif /* _NVM_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/nvs.h b/src/soc/intel/fsp_baytrail/baytrail/nvs.h
new file mode 100644
index 0000000000..1e123109c8
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/nvs.h
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2011 Google Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_NVS_H_
+#define _BAYTRAIL_NVS_H_
+
+#include <baytrail/device_nvs.h>
+
+typedef struct {
+ /* Miscellaneous */
+ u16 osys; /* 0x00 - Operating System */
+ u8 smif; /* 0x02 - SMI function call ("TRAP") */
+ u8 prm0; /* 0x03 - SMI function call parameter */
+ u8 prm1; /* 0x04 - SMI function call parameter */
+ u8 scif; /* 0x05 - SCI function call (via _L00) */
+ u8 prm2; /* 0x06 - SCI function call parameter */
+ u8 prm3; /* 0x07 - SCI function call parameter */
+ u8 lckf; /* 0x08 - Global Lock function for EC */
+ u8 prm4; /* 0x09 - Lock function parameter */
+ u8 prm5; /* 0x0a - Lock function parameter */
+ u32 p80d; /* 0x0b - Debug port (IO 0x80) value */
+ u8 lids; /* 0x0f - LID state (open = 1) */
+ u8 pwrs; /* 0x10 - Power state (AC = 1) */
+ u8 pcnt; /* 0x11 - Processor Count */
+ u8 tpmp; /* 0x12 - TPM Present and Enabled */
+ u8 tlvl; /* 0x13 - Throttle Level */
+ u8 ppcm; /* 0x14 - Maximum P-state usable by OS */
+ u8 rsvd1[11];
+
+ /* Device Config */
+ u8 s5u0; /* 0x20 - Enable USB0 in S5 */
+ u8 s5u1; /* 0x21 - Enable USB1 in S5 */
+ u8 s3u0; /* 0x22 - Enable USB0 in S3 */
+ u8 s3u1; /* 0x23 - Enable USB1 in S3 */
+ u8 tact; /* 0x24 - Thermal Active trip point */
+ u8 tpsv; /* 0x25 - Thermal Passive trip point */
+ u8 tcrt; /* 0x26 - Thermal Critical trip point */
+ u8 dpte; /* 0x27 - Enable DPTF */
+ u8 rsvd2[8];
+
+ /* Base Addresses */
+ u32 cmem; /* 0x30 - CBMEM TOC */
+ u32 tolm; /* 0x34 - Top of Low Memory */
+ u32 cbmc; /* 0x38 - coreboot memconsole */
+ u8 rsvd3[196];
+
+ /* Baytrail LPSS (0x1000) */
+ device_nvs_t dev;
+} __attribute__((packed)) global_nvs_t;
+
+#ifdef __SMM__
+/* Used in SMM to find the ACPI GNVS address */
+global_nvs_t *smm_get_gnvs(void);
+#endif
+
+#endif /* _BAYTRAIL_NVS_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/pattrs.h b/src/soc/intel/fsp_baytrail/baytrail/pattrs.h
new file mode 100644
index 0000000000..d4eb721593
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/pattrs.h
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _PATTRS_H_
+#define _PATTRS_H_
+
+#include <stdint.h>
+#include <cpu/x86/msr.h>
+
+enum {
+ IACORE_MIN,
+ IACORE_LFM,
+ IACORE_MAX,
+ IACORE_TURBO,
+ IACORE_END
+};
+
+/* The pattrs structure is a common place to stash pertinent information
+ * about the processor or platform. Instead of going to the source (msrs, cpuid)
+ * every time an attribute is needed use the pattrs structure.
+ */
+struct pattrs {
+ msr_t platform_id;
+ msr_t platform_info;
+ int iacore_ratios[IACORE_END];
+ int iacore_vids[IACORE_END];
+ uint32_t cpuid;
+ int revid;
+ int stepping;
+ const void *microcode_patch;
+ int address_bits;
+ int num_cpus;
+ unsigned bclk_khz;
+};
+
+/* This is just to hide the abstraction w/o relying on how the underlying
+ * storage is allocated. */
+#define PATTRS_GLOB_NAME __global_pattrs
+#define DEFINE_PATTRS struct pattrs PATTRS_GLOB_NAME
+extern DEFINE_PATTRS;
+
+static inline const struct pattrs *pattrs_get(void)
+{
+ return &PATTRS_GLOB_NAME;
+}
+
+
+#endif /* _PATTRS_H_ */
+
diff --git a/src/soc/intel/fsp_baytrail/baytrail/pci_devs.h b/src/soc/intel/fsp_baytrail/baytrail/pci_devs.h
new file mode 100644
index 0000000000..dc41d13767
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/pci_devs.h
@@ -0,0 +1,241 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_PCI_DEVS_H_
+#define _BAYTRAIL_PCI_DEVS_H_
+
+#define BUS0 0
+
+/* All these devices live on bus 0 with the associated device and function */
+#define DEV_FUNC(x,y) ((x<<3) | y)
+
+
+/* SoC transaction router */
+#define SOC_DEV 0x0
+#define SOC_FUNC 0
+# define SOC_DEVID 0x0f00
+# define SOC_DEV_FUNC DEV_FUNC(SOC_DEV,SOC_FUNC)
+
+
+/* Graphics and Display */
+#define GFX_DEV 0x2
+#define GFX_FUNC 0
+# define GFX_DEVID 0x0f31
+# define GFX_DEV_FUNC DEV_FUNC(GFX_DEV,GFX_FUNC)
+
+/* MIPI */
+#define MIPI_DEV 0x3
+#define MIPI_FUNC 0
+# define MIPI_DEVID 0x0f38
+# define MIPI_DEV_FUNC DEV_FUNC(MIPI_DEV,MIPI_FUNC)
+
+
+/* SDIO Port */
+#define EMMC_DEV 0x10
+#define EMMC_FUNC 0
+# define EMMC_DEVID 0x0f14
+# define EMMC_DEV_FUNC DEV_FUNC(EMMC_DEV,EMMC_FUNC)
+
+/* SDIO Port */
+#define SDIO_DEV 0x11
+#define SDIO_FUNC 0
+# define SDIO_DEVID 0x0f15
+# define SDIO_DEV_FUNC DEV_FUNC(SDIO_DEV,SDIO_FUNC)
+
+/* SD Port */
+#define SD_DEV 0x12
+#define SD_FUNC 0
+# define SD_DEVID 0x0f16
+# define SD_DEV_FUNC DEV_FUNC(SD_DEV,SD_FUNC)
+
+/* SATA */
+#define SATA_DEV 0x13
+#define SATA_FUNC 0
+# define IDE1_DEVID 0x0f20
+# define IDE2_DEVID 0x0f21
+# define AHCI1_DEVID 0x0f22
+# define AHCI2_DEVID 0x0f23
+# define SATA_MA 0x84
+# define SATA_MAP 0x90
+# define SATA_PSC 0x92
+# define SATA_SP 0xD0
+# define SATA_BIST1 0xE4
+# define SATA_BIST2 0xE8
+# define SATA_DEV_FUNC DEV_FUNC(SATA_DEV,SATA_FUNC)
+
+#define SATA_MA_BDFO PCI_DEV(BUS0, SATA_DEV, SATA_FUNC), SATA_MA
+#define SATA_SP_BDFO PCI_DEV(BUS0, SATA_DEV, SATA_FUNC), SATA_SP
+#define SATA_BIST1_BDFO PCI_DEV(BUS0, SATA_DEV, SATA_FUNC), SATA_BIST1
+#define SATA_BIST2_BDFO PCI_DEV(BUS0, SATA_DEV, SATA_FUNC), SATA_BIST2
+
+/* xHCI */
+#define XHCI_DEV 0x14
+#define XHCI_FUNC 0
+# define XHCI_DEVID 0x0f35
+# define XHCI_FUS_REG 0xE0
+# define XHCI_FUNC_DISABLE (1 << 0)
+# define XHCI_USB2PR_REG 0xD0
+# define XHCI_DEV_FUNC DEV_FUNC(XHCI_DEV,XHCI_FUNC)
+
+/* LPE Audio */
+#define LPE_DEV 0x15
+#define LPE_FUNC 0
+# define LPE_DEVID 0x0f28
+# define LPE_DEV_FUNC DEV_FUNC(LPE_DEV,LPE_FUNC)
+
+/* OTG */
+#define OTG_DEV 0x16
+#define OTG_FUNC 0
+# define OTG_DEVID 0x0f37
+# define OTG_DEV_FUNC DEV_FUNC(LPE_DEV,LPE_FUNC)
+
+/* MMC Port */
+#define MMC45_DEV 0x17
+#define MMC45_FUNC 0
+# define MMC45_DEVID 0x0f50
+# define MMC45_DEV_FUNC DEV_FUNC(MMC45_DEV,MMC45_FUNC)
+
+/* Serial IO 1 */
+#define SIO1_DEV 0x18
+# define SIO_DMA1_DEV SIO1_DEV
+# define SIO_DMA1_FUNC 0
+# define SIO_DMA1_DEVID 0x0f40
+# define I2C1_DEV SIO1_DEV
+# define I2C1_FUNC 1
+# define I2C1_DEVID 0x0f41
+# define I2C2_DEV SIO1_DEV
+# define I2C2_FUNC 2
+# define I2C2_DEVID 0x0f42
+# define I2C3_DEV SIO1_DEV
+# define I2C3_FUNC 3
+# define I2C3_DEVID 0x0f43
+# define I2C4_DEV SIO1_DEV
+# define I2C4_FUNC 4
+# define I2C4_DEVID 0x0f44
+# define I2C5_DEV SIO1_DEV
+# define I2C5_FUNC 5
+# define I2C5_DEVID 0x0f45
+# define I2C6_DEV SIO1_DEV
+# define I2C6_FUNC 6
+# define I2C6_DEVID 0x0f46
+# define I2C7_DEV SIO1_DEV
+# define I2C7_FUNC 7
+# define I2C7_DEVID 0x0f47
+# define SIO_DMA1_DEV_FUNC DEV_FUNC(SIO_DMA1_DEV,SIO_DMA1_FUNC)
+# define I2C1_DEV_FUNC DEV_FUNC(I2C1_DEV,I2C1_FUNC)
+# define I2C2_DEV_FUNC DEV_FUNC(I2C2_DEV,I2C2_FUNC)
+# define I2C3_DEV_FUNC DEV_FUNC(I2C3_DEV,I2C3_FUNC)
+# define I2C4_DEV_FUNC DEV_FUNC(I2C4_DEV,I2C4_FUNC)
+# define I2C5_DEV_FUNC DEV_FUNC(I2C5_DEV,I2C5_FUNC)
+# define I2C6_DEV_FUNC DEV_FUNC(I2C6_DEV,I2C6_FUNC)
+# define I2C7_DEV_FUNC DEV_FUNC(I2C7_DEV,I2C7_FUNC)
+
+/* Trusted Execution Engine */
+#define TXE_DEV 0x1a
+#define TXE_FUNC 0
+# define TXE_DEVID 0x0f18
+# define TXE_DEV_FUNC DEV_FUNC(TXE_DEV,TXE_FUNC)
+
+/* HD Audio */
+#define HDA_DEV 0x1b
+#define HDA_FUNC 0
+# define HDA_DEVID 0x0f04
+# define HDA_DEV_FUNC DEV_FUNC(HDA_DEV,HDA_FUNC)
+# define HDA_AZUBAR 0x14
+# define HDA_MMLA 0x64
+# define HDA_MMUA 0x68
+#define HDA_AZUBAR_BDFO PCI_DEV(BUS0, HDA_DEV, HDA_FUNC), HDA_AZUBAR
+#define HDA_MMLA_BDFO PCI_DEV(BUS0, HDA_DEV, HDA_FUNC), HDA_MMLA
+#define HDA_MMUA_BDFO PCI_DEV(BUS0, HDA_DEV, HDA_FUNC), HDA_MMUA
+
+/* PCIe Ports */
+#define PCIE_DEV 0x1c
+# define PCIE_PORT1_DEV PCIE_DEV
+# define PCIE_PORT1_FUNC 0
+# define PCIE_PORT1_DEVID 0x0f48
+# define PCIE_PORT2_DEV PCIE_DEV
+# define PCIE_PORT2_FUNC 1
+# define PCIE_PORT2_DEVID 0x0f4a
+# define PCIE_PORT3_DEV PCIE_DEV
+# define PCIE_PORT3_FUNC 2
+# define PCIE_PORT3_DEVID 0x0f4c
+# define PCIE_PORT4_DEV PCIE_DEV
+# define PCIE_PORT4_FUNC 3
+# define PCIE_PORT4_DEVID 0x0f4e
+# define PCIE_PORT1_DEV_FUNC DEV_FUNC(PCIE_DEV,PCIE_PORT1_FUNC)
+# define PCIE_PORT2_DEV_FUNC DEV_FUNC(PCIE_DEV,PCIE_PORT2_FUNC)
+# define PCIE_PORT3_DEV_FUNC DEV_FUNC(PCIE_DEV,PCIE_PORT3_FUNC)
+# define PCIE_PORT4_DEV_FUNC DEV_FUNC(PCIE_DEV,PCIE_PORT4_FUNC)
+
+/* EHCI */
+#define EHCI_DEV 0x1d
+#define EHCI_FUNC 0
+# define EHCI_DEVID 0x0f34
+# define EHCI_DEV_FUNC DEV_FUNC(EHCI_DEV,EHCI_FUNC)
+
+/* Serial IO 2 */
+#define SIO2_DEV 0x1e
+# define SIO_DMA2_DEV SIO2_DEV
+# define SIO_DMA2_FUNC 0
+# define SIO_DMA2_DEVID 0x0f06
+# define PWM1_DEV SIO2_DEV
+# define PWM1_FUNC 1
+# define PWM1_DEVID 0x0f08
+# define PWM2_DEV SIO2_DEV
+# define PWM2_FUNC 2
+# define PWM2_DEVID 0x0f09
+# define HSUART1_DEV SIO2_DEV
+# define HSUART1_FUNC 3
+# define HSUART1_DEVID 0x0f0a
+# define HSUART2_DEV SIO2_DEV
+# define HSUART2_FUNC 4
+# define HSUART2_DEVID 0x0f0c
+# define SPI_DEV SIO2_DEV
+# define SPI_FUNC 5
+# define SPI_DEVID 0xf0e
+# define SIO_DMA2_DEV_FUNC DEV_FUNC(SIO_DMA2_DEV,SIO_DMA2_FUNC)
+# define PWM1_DEV_FUNC DEV_FUNC(PWM1_DEV,PWM1_FUNC)
+# define PWM2_DEV_FUNC DEV_FUNC(PWM2_DEV,PWM2_FUNC)
+# define HSUART1_DEV_FUNC DEV_FUNC(HSUART1_DEV,HSUART1_FUNC)
+# define HSUART2_DEV_FUNC DEV_FUNC(HSUART2_DEV,HSUART2_FUNC)
+# define SPI_DEV_FUNC DEV_FUNC(SPI_DEV,SPI_FUNC)
+
+
+/* Platform Controller Unit */
+#define PCU_DEV 0x1f
+# define LPC_DEV PCU_DEV
+# define LPC_FUNC 0
+# define LPC_DEVID 0x0f1c
+# define SMBUS_DEV PCU_DEV
+# define SMBUS_FUNC 3
+# define SMBUS_DEVID 0x0f12
+# define LPC_DEV_FUNC DEV_FUNC(LPC_DEV,LPC_FUNC)
+# define LPC_BDF PCI_DEV(0, LPC_DEV, LPC_FUNC)
+# define SMBUS_DEV_FUNC DEV_FUNC(SMBUS_DEV,SMBUS_FUNC)
+
+#define INITIAL_TIMESTAMP_LOCATION HDA_MMUA_BDFO
+#define BEFORE_CAR_TIMESTAMP_LOCATION SATA_BIST1_BDFO
+#define ASM_BEFORE_CAR_TSC_LOC 0x80 << 24 | SATA_DEV_FUNC << 8 | SATA_BIST1
+#define AFTER_CAR_TIMESTAMP_LOCATION SATA_BIST2_BDFO
+#define ASM_AFTER_CAR_TSC_LOC 0x80 << 24 | SATA_DEV_FUNC << 8 | SATA_BIST2
+#define START_ROMSTAGE_TIMESTAMP_LOCATION HDA_MMLA_BDFO
+#define BEFORE_RAMINIT_TIMESTAMP_LOCATION SATA_MA_BDFO
+
+#endif /* _BAYTRAIL_PCI_DEVS_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/pcie.h b/src/soc/intel/fsp_baytrail/baytrail/pcie.h
new file mode 100644
index 0000000000..98effeaacb
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/pcie.h
@@ -0,0 +1,102 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_PCIE_H_
+#define _BAYTRAIL_PCIE_H_
+
+/* PCIe root port config space registers. */
+#define XCAP 0x40
+# define SI (1 << 24)
+#define DCAP 0x44
+# define MPS_MASK 0x7
+#define DCTL_DSTS 0x48
+# define URE (1 << 3)
+# define FEE (1 << 2)
+# define NFE (1 << 1)
+# define CEE (1 << 0)
+#define LCAP 0x4c
+# define L1EXIT_SHIFT 15
+# define L1EXIT_MASK (0x7 << L1EXIT_SHIFT)
+#define LCTL 0x50
+# define CCC (1 << 6)
+# define RL (1 << 5)
+# define LD (1 << 4)
+#define LSTS 0x52
+#define SLCAP 0x54
+# define SLN_SHIFT 19
+# define SLS_SHIFT 15
+# define SLV_SHIFT 7
+# define HPC (1 << 6)
+# define HPS (1 << 5)
+#define SLCTL_SLSTS 0x58
+# define PDS (1 << 22)
+#define DCAP2 0x64
+# define OBFFS (0x3 << 18)
+# define LTRMS (1 << 11)
+#define DSTS2 0x68
+# define OBFFEN (3 << 13)
+# define LTRME (1 << 10)
+# define CTD (1 << 4)
+#define CHCFG 0xd0
+# define UPSD (1 << 24)
+# define UNRS (1 << 15)
+# define UPRS (1 << 14)
+#define MPC2 0xd4
+# define IPF (1 << 11)
+# define LSTP (1 << 6)
+# define EOIFD (1 << 1)
+#define MPC 0xd8
+# define CCEL_SHIFT 15
+# define CCEL_MASK (0x7 << CCEL_SHIFT)
+#define RPPGEN 0xe0
+# define RPSCGEN (1 << 15)
+# define LCLKREQEN (1 << 13)
+# define BBCLKREQEN (1 << 12)
+# define SRDLCGEN (1 << 11)
+# define SRDBCGEN (1 << 10)
+# define RPDLCGEN (1 << 9)
+# define RPDBCGEN (1 << 8)
+#define PWRCTL 0xe8
+# define RPL1SQPOL (1 << 1)
+# define RPDTSQPOL (1 << 0)
+#define PHYCTL2_IOSFBCTL 0xf4
+# define PLL_OFF_EN (1 << 8)
+# define TDFT (3 << 14)
+# define TXCFGCHWAIT (3 << 12)
+# define SIID (3 << 26)
+#define STRPFUSECFG 0xfc
+# define LANECFG_SHIFT 14
+# define LANECFG_MASK (0x3 << LANECFG_SHIFT)
+#define AERCH 0x100
+#define NFTS 0x314
+#define L0SC 0x318
+#define CFG2 0x320
+# define CSREN (1 << 22)
+# define LATGC_SHIFT 6
+# define LATGC_MASK (0x7 << LATGC_SHIFT)
+#define PCIEDBG 0x324
+# define SPCE (1 << 5)
+#define PCIESTS1 0x328
+#define PCIEALC 0x338
+#define RTP 0x33c
+#define PHYCTL4 0x408
+# define SQDIS (1 << 27)
+
+
+#endif /* _BAYTRAIL_PCIE_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/pmc.h b/src/soc/intel/fsp_baytrail/baytrail/pmc.h
new file mode 100644
index 0000000000..ee15dd92a7
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/pmc.h
@@ -0,0 +1,307 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_PMC_H_
+#define _BAYTRAIL_PMC_H_
+
+
+#define IOCOM1 0x3f8
+
+/* Memory mapped IO registers behind PMC_BASE_ADDRESS */
+#define PRSTS 0x00
+# define PMC_WDT_STS (1 << 15)
+# define SEC_GBLRST_STS (1 << 7)
+# define SEC_WDT_STS (1 << 6)
+# define WOL_OVR_WK_STS (1 << 5)
+# define PMC_WAKE_STS (1 << 4)
+#define PMC_CFG 0x08
+# define SPS (1 << 5)
+# define NO_REBOOT (1 << 4)
+# define SX_ENT_TO_EN (1 << 3)
+# define TIMING_T581_SHIFT (0)
+# define TIMING_T581_MASK (3 << TIMING_T581_SHIFT)
+# define TIMING_T581_10uS (0 << TIMING_T581_SHIFT)
+# define TIMING_T581_100uS (1 << TIMING_T581_SHIFT)
+# define TIMING_T581_1mS (2 << TIMING_T581_SHIFT)
+# define TIMING_T581_10mS (3 << TIMING_T581_SHIFT)
+#define VLV_PM_STS 0x0c
+# define PMC_MSG_FULL_STS (1 << 24)
+# define PMC_MSG_4_FULL_STS (1 << 23)
+# define PMC_MSG_3_FULL_STS (1 << 22)
+# define PMC_MSG_2_FULL_STS (1 << 21)
+# define PMC_MSG_1_FULL_STS (1 << 20)
+# define CODE_REQ (1 << 8)
+# define HPR_ENT_TO (1 << 2)
+# define SX_ENT_TO (1 << 1)
+#define GEN_PMCON1 0x20
+# define UART_EN (1 << 24)
+# define DISB (1 << 23)
+# define MEM_SR (1 << 21)
+# define SRS (1 << 20)
+# define CTS (1 << 19)
+# define MS4V (1 << 18)
+# define PWR_FLR (1 << 16)
+# define PME_B0_S5_DIS (1 << 15)
+# define SUS_PWR_FLR (1 << 14)
+# define WOL_EN_OVRD (1 << 13)
+# define DIS_SLP_X_STRCH_SUS_UP (1 << 12)
+# define GEN_RST_STS (1 << 9)
+# define RPS (1 << 2)
+# define AFTERG3_EN (1 << 0)
+#define GEN_PMCON2 0x24
+# define SLPSX_STR_POL_LOCK (1 << 18)
+# define BIOS_PCI_EXP_EN (1 << 10)
+# define PWRBTN_LVL (1 << 9)
+# define SMI_LOCK (1 << 4)
+#define ETR 0x48
+# define CF9LOCK (1 << 31)
+# define LTR_DEF (1 << 22)
+# define IGNORE_HPET (1 << 21)
+# define CF9GR (1 << 20)
+# define CWORWRE (1 << 18)
+#define FUNC_DIS 0x34
+# define SIO_DMA2_DIS (1 << 0)
+# define PWM1_DIS (1 << 1)
+# define PWM2_DIS (1 << 2)
+# define HSUART1_DIS (1 << 3)
+# define HSUART2_DIS (1 << 4)
+# define SPI_DIS (1 << 5)
+# define MMC45_DIS (1 << 8)
+# define EMMC_DIS (1 << 8)
+# define SDIO_DIS (1 << 9)
+# define SD_DIS (1 << 10)
+# define MIPI_DIS (1 << 11)
+# define HDA_DIS (1 << 12)
+# define LPE_DIS (1 << 13)
+# define OTG_DIS (1 << 14)
+# define XHCI_DIS (1 << 15)
+# define SATA_DIS (1 << 17)
+# define EHCI_DIS (1 << 18)
+# define TXE_DIS (1 << 19)
+# define PCIE_PORT1_DIS (1 << 20)
+# define PCIE_PORT2_DIS (1 << 21)
+# define PCIE_PORT3_DIS (1 << 22)
+# define PCIE_PORT4_DIS (1 << 23)
+# define SIO_DMA1_DIS (1 << 24)
+# define I2C1_DIS (1 << 25)
+# define I2C2_DIS (1 << 26)
+# define I2C3_DIS (1 << 27)
+# define I2C4_DIS (1 << 28)
+# define I2C5_DIS (1 << 29)
+# define I2C6_DIS (1 << 30)
+# define I2C7_DIS (1 << 31)
+#define FUNC_DIS2 0x38
+# define USH_SS_PHY_DIS (1 << 2)
+# define OTG_SS_PHY_DIS (1 << 1)
+# define SMBUS_DIS (1 << 0)
+#define GPIO_ROUT 0x58
+# define ROUTE_MASK 3
+# define ROUTE_NONE 0
+# define ROUTE_SMI 1
+# define ROUTE_SCI 2
+#define PLT_CLK_CTL_0 0x60
+#define PLT_CLK_CTL_1 0x64
+#define PLT_CLK_CTL_2 0x68
+#define PLT_CLK_CTL_3 0x6c
+#define PLT_CLK_CTL_4 0x70
+#define PLT_CLK_CTL_5 0x74
+# define CLK_FREQ_25MHZ (0x0 << 2)
+# define CLK_FREQ_19P2MHZ (0x1 << 2)
+# define CLK_CTL_D3_LPE (0x0 << 0)
+# define CLK_CTL_ON (0x1 << 0)
+# define CLK_CTL_OFF (0x2 << 0)
+#define PME_STS 0xc0
+#define GPE_LEVEL_EDGE 0xc4
+# define GPE_EDGE 0
+# define GPE_LEVEL 1
+#define GPE_POLARITY 0xc8
+# define GPE_ACTIVE_HIGH 1
+# define GPE_ACTIVE_LOW 0
+#define LOCK 0xcc
+
+/* IO Mapped registers behind ACPI_BASE_ADDRESS */
+#define PM1_STS 0x00
+#define WAK_STS (1 << 15)
+#define PCIEXPWAK_STS (1 << 14)
+#define USB_STS (1 << 13)
+#define PRBTNOR_STS (1 << 11)
+#define RTC_STS (1 << 10)
+#define PWRBTN_STS (1 << 8)
+#define GBL_STS (1 << 5)
+#define TMROF_STS (1 << 0)
+#define PM1_EN 0x02
+#define PCIEXPWAK_DIS (1 << 14)
+#define USB_WAKE_EN (1 << 13)
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
+#define PM1_CNT 0x04
+#define SLP_EN (1 << 13)
+#define SLP_TYP_SHIFT 10
+#define SLP_TYP (7 << SLP_TYP_SHIFT)
+#define SLP_TYP_S0 0
+#define SLP_TYP_S1 1
+#define SLP_TYP_S3 5
+#define SLP_TYP_S4 6
+#define SLP_TYP_S5 7
+#define GBL_RLS (1 << 2)
+#define BM_RLD (1 << 1)
+#define SCI_EN (1 << 0)
+#define PM1_TMR 0x08
+#define GPE0_STS 0x20
+#define CORE_GPIO_STS7 (1 << 31)
+#define CORE_GPIO_STS6 (1 << 30)
+#define CORE_GPIO_STS5 (1 << 29)
+#define CORE_GPIO_STS4 (1 << 28)
+#define CORE_GPIO_STS3 (1 << 27)
+#define CORE_GPIO_STS2 (1 << 26)
+#define CORE_GPIO_STS1 (1 << 25)
+#define CORE_GPIO_STS0 (1 << 24)
+#define SUS_GPIO_STS7 (1 << 23)
+#define SUS_GPIO_STS6 (1 << 22)
+#define SUS_GPIO_STS5 (1 << 21)
+#define SUS_GPIO_STS4 (1 << 20)
+#define SUS_GPIO_STS3 (1 << 19)
+#define SUS_GPIO_STS2 (1 << 18)
+#define SUS_GPIO_STS1 (1 << 17)
+#define SUS_GPIO_STS0 (1 << 16)
+#define PME_B0_STS_BIT 13
+#define PME_B0_STS (1 << PME_B0_STS_BIT)
+#define BATLOW_STS (1 << 10)
+#define PCI_EXP_STS (1 << 9)
+#define PCIE_WAKE3_STS (1 << 8)
+#define PCIE_WAKE2_STS (1 << 7)
+#define PCIE_WAKE1_STS (1 << 6)
+#define GUNIT_SCI_STS (1 << 5)
+#define PUNIT_SCI_STS (1 << 4)
+#define PCIE_WAKE0_STS (1 << 3)
+#define SWGPE_STS (1 << 2)
+#define HOT_PLUG_STS (1 << 1)
+#define GPE0_EN 0x28
+#define CORE_GPIO_EN7 (1 << 31)
+#define CORE_GPIO_EN6 (1 << 30)
+#define CORE_GPIO_EN5 (1 << 29)
+#define CORE_GPIO_EN4 (1 << 28)
+#define CORE_GPIO_EN3 (1 << 27)
+#define CORE_GPIO_EN2 (1 << 26)
+#define CORE_GPIO_EN1 (1 << 25)
+#define CORE_GPIO_EN0 (1 << 24)
+#define SUS_GPIO_EN7_BIT 23
+#define SUS_GPIO_EN7 (1 << SUS_GPIO_EN7_BIT)
+#define SUS_GPIO_EN6_BIT 22
+#define SUS_GPIO_EN6 (1 << SUS_GPIO_EN6_BIT)
+#define SUS_GPIO_EN5_BIT 21
+#define SUS_GPIO_EN5 (1 << SUS_GPIO_EN5_BIT)
+#define SUS_GPIO_EN4_BIT 20
+#define SUS_GPIO_EN4 (1 << SUS_GPIO_EN4_BIT)
+#define SUS_GPIO_EN3_BIT 19
+#define SUS_GPIO_EN3 (1 << SUS_GPIO_EN3_BIT)
+#define SUS_GPIO_EN2_BIT 18
+#define SUS_GPIO_EN2 (1 << SUS_GPIO_EN2_BIT)
+#define SUS_GPIO_EN1_BIT 17
+#define SUS_GPIO_EN1 (1 << SUS_GPIO_EN1_BIT)
+#define SUS_GPIO_EN0_BIT 16
+#define SUS_GPIO_EN0 (1 << SUS_GPIO_EN0_BIT)
+#define PME_B0_EN (1 << 13)
+#define BATLOW_EN (1 << 10)
+#define PCI_EXP_EN (1 << 9)
+#define PCIE_WAKE3_EN (1 << 8)
+#define PCIE_WAKE2_EN (1 << 7)
+#define PCIE_WAKE1_EN (1 << 6)
+#define PCIE_WAKE0_EN (1 << 3)
+#define SWGPE_EN (1 << 2)
+#define HOT_PLUG_EN (1 << 1)
+#define _ACPI_ENABLE_WAKE_SUS_GPIO(x) SUS_GPIO_EN##x##_BIT
+#define ACPI_ENABLE_WAKE_SUS_GPIO(x) _ACPI_ENABLE_WAKE_SUS_GPIO(x)
+#define SMI_EN 0x30
+#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
+#define USB_EN (1 << 17) // Legacy USB2 SMI logic
+#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS
+#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al)
+#define BIOS_RLS (1 << 7) // asserts SCI on bit set
+#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set
+#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI#
+#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI#
+#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit
+#define EOS (1 << 1) // End of SMI (deassert SMI#)
+#define GBL_SMI_EN (1 << 0) // SMI# generation at all?
+#define SMI_STS 0x34
+#define ALT_GPIO_SMI 0x38
+#define UPRWC 0x3c
+# define UPRWC_WR_EN (1 << 1) // USB Per-Port Registers Write Enable
+#define GPE_CTRL 0x40
+#define PM2A_CNT_BLK 0x50
+#define TCO_RLD 0x60
+#define TCO_STS 0x64
+# define SECOND_TO_STS (1 << 17)
+# define TCO_TIMEOUT (1 << 3)
+#define TCO1_CNT 0x68
+# define TCO_LOCK (1 << 12)
+# define TCO_TMR_HALT (1 << 11)
+#define TCO_TMR 0x70
+
+/* I/O ports */
+#define RST_CNT 0xcf9
+# define FULL_RST (1 << 3)
+# define RST_CPU (1 << 2)
+# define SYS_RST (1 << 1)
+
+#if !defined(__ASSEMBLER__) && !defined(__ACPI__)
+
+/* Track power state from reset to log events. */
+struct chipset_power_state {
+ uint16_t pm1_sts;
+ uint16_t pm1_en;
+ uint32_t pm1_cnt;
+ uint32_t gpe0_sts;
+ uint32_t gpe0_en;
+ uint32_t tco_sts;
+ uint32_t prsts;
+ uint32_t gen_pmcon1;
+ uint32_t gen_pmcon2;
+} __attribute__((packed));
+
+/* Power Management Utility Functions. */
+uint16_t get_pmbase(void);
+uint32_t clear_smi_status(void);
+uint16_t clear_pm1_status(void);
+uint32_t clear_tco_status(void);
+uint32_t clear_gpe_status(void);
+uint32_t clear_alt_status(void);
+void clear_pmc_status(void);
+void enable_smi(uint32_t mask);
+void disable_smi(uint32_t mask);
+void enable_pm1(uint16_t events);
+void enable_pm1_control(uint32_t mask);
+void disable_pm1_control(uint32_t mask);
+void enable_gpe(uint32_t mask);
+void disable_gpe(uint32_t mask);
+void disable_all_gpe(void);
+
+#if IS_ENABLED(CONFIG_ELOG)
+void southcluster_log_state(void);
+#else
+static inline void southcluster_log_state(void) {}
+#endif
+
+#endif /* !defined(__ASSEMBLER__) && !defined(__ACPI__) */
+
+#endif /* _BAYTRAIL_PMC_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/ramstage.h b/src/soc/intel/fsp_baytrail/baytrail/ramstage.h
new file mode 100644
index 0000000000..095f09cdc1
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/ramstage.h
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_RAMSTAGE_H_
+#define _BAYTRAIL_RAMSTAGE_H_
+
+#include <device/device.h>
+
+/* The baytrail_init_pre_device() function is called prior to device
+ * initialization, but it's after console and cbmem has been reinitialized. */
+void baytrail_init_pre_device(void);
+void baytrail_init_cpus(device_t dev);
+void set_max_freq(void);
+void southcluster_enable_dev(device_t dev);
+void scc_enable_acpi_mode(device_t dev, int iosf_reg, int nvs_index);
+
+extern struct pci_operations soc_pci_ops;
+
+#endif /* _BAYTRAIL_RAMSTAGE_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/reset.h b/src/soc/intel/fsp_baytrail/baytrail/reset.h
new file mode 100644
index 0000000000..dbf0fd23cf
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/reset.h
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_RESET_H_
+#define _BAYTRAIL_RESET_H_
+#include <reset.h>
+
+/* Bay Trail has the following types of resets:
+ * - Soft reset (INIT# to cpu) - write 0x1 to I/O 0x92
+ * - Soft reset (INIT# to cpu)- write 0x4 to I/0 0xcf9
+ * - Cold reset (S0->S5->S0) - write 0xe to I/0 0xcf9
+ * - Warm reset (PMC_PLTRST# assertion) - write 0x6 to I/O 0xcf9
+ * - Global reset (S0->S5->S0 with TXE reset) - write 0x6 or 0xe to 0xcf9 but
+ * with ETR[20] set.
+ */
+
+void cold_reset(void);
+void warm_reset(void);
+
+#endif /* _BAYTRAIL_RESET_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/romstage.h b/src/soc/intel/fsp_baytrail/baytrail/romstage.h
new file mode 100644
index 0000000000..8feab8a3b4
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/romstage.h
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_ROMSTAGE_H_
+#define _BAYTRAIL_ROMSTAGE_H_
+
+#if !defined(__PRE_RAM__)
+#error "Don't include romstage.h from a ramstage compilation unit!"
+#endif
+
+void report_platform_info(void);
+
+#include <stdint.h>
+#include <arch/cpu.h>
+
+#include <fsptypes.h>
+
+void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr);
+
+#define NUM_ROMSTAGE_TS 4
+
+void tco_disable(void);
+void punit_init(void);
+void set_max_freq(void);
+void early_mainboard_romstage_entry(void);
+void late_mainboard_romstage_entry(void);
+void get_func_disables(uint32_t *mask, uint32_t *mask2);
+
+#if IS_ENABLED(CONFIG_ENABLE_BUILTIN_COM1)
+void byt_config_com1_and_enable(void);
+#else
+static inline void byt_config_com1_and_enable(void) { }
+#endif
+
+#endif /* _BAYTRAIL_ROMSTAGE_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/smm.h b/src/soc/intel/fsp_baytrail/baytrail/smm.h
new file mode 100644
index 0000000000..0208c9f290
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/smm.h
@@ -0,0 +1,48 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_SMM_H_
+#define _BAYTRAIL_SMM_H_
+
+/* There is a bug in the order of Kconfig includes in that arch/x86/Kconfig
+ * is included after chipset code. This causes the chipset's Kconfig to be
+ * clobbered by the arch/x86/Kconfig if they have the same name. */
+static inline int smm_region_size(void)
+{
+#ifndef CONFIG_SMM_TSEG_SIZE
+#error CONFIG_SMM_TSEG_SIZE must be set.
+#endif
+
+ /* Make it 8MiB by default. */
+ if (CONFIG_SMM_TSEG_SIZE == 0)
+ return (8 << 20);
+ return CONFIG_SMM_TSEG_SIZE;
+}
+
+void *smm_region_start(void);
+
+#if !defined(__PRE_RAM__) && !defined(__SMM___)
+#include <stdint.h>
+void southcluster_smm_clear_state(void);
+void southcluster_smm_enable_smi(void);
+void southcluster_smm_save_gpio_route(uint32_t route);
+#endif
+
+#endif /* _BAYTRAIL_SMM_H_ */
diff --git a/src/soc/intel/fsp_baytrail/baytrail/spi.h b/src/soc/intel/fsp_baytrail/baytrail/spi.h
new file mode 100644
index 0000000000..ee1648a135
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/spi.h
@@ -0,0 +1,68 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BAYTRAIL_SPI_H_
+#define _BAYTRAIL_SPI_H_
+
+#include <stdint.h>
+
+/* These registers live behind SPI_BASE_ADDRESS. */
+#define HSFSTS 0x04
+# define FLOCKDN (0x1 << 15)
+#define PREOP 0x94
+#define OPTYPE 0x96
+#define OPMENU0 0x98
+#define OPMENU1 0x9c
+#define LVSCC 0xc4
+# define VCL (0x1 << 23)
+# define EO(x) (((x) & 0xff) << 8)
+# define WG_1_BYTE (0x0 << 2)
+# define WG_64_BYTE (0x1 << 2)
+# define BES_256_BYTE (0x0 << 0)
+# define BES_4_KB (0x1 << 0)
+# define BES_8_KB (0x2 << 0)
+# define BES_64_KB (0x3 << 0)
+#define UVSCC 0xc8
+#define SCS 0xf8
+# define SMIWPEN (0x1 << 7)
+#define BCR 0xfc
+# define EISS (0x1 << 5)
+# define SRC_MASK (0x3 << 2)
+# define SRC_CACHE_NO_PREFETCH (0x0 << 2)
+# define SRC_NO_CACHE_NO_PREFETCH (0x1 << 2)
+# define SRC_CACHE_PREFETCH (0x2 << 2)
+# define BCR_LE (0x1 << 1)
+# define BCR_WPD (0x1 << 0)
+
+/*
+ * SPI lockdown configuration.
+ */
+struct spi_config {
+ uint16_t preop;
+ uint16_t optype;
+ uint32_t opmenu[2];
+ uint32_t lvscc;
+ uint32_t uvscc;
+};
+
+/* Return 0 on success < 0 on failure. */
+int mainboard_get_spi_config(struct spi_config *cfg);
+
+#endif /* _BAYTRAIL_SPI_H_ */
+
diff --git a/src/soc/intel/fsp_baytrail/baytrail/xhci.h b/src/soc/intel/fsp_baytrail/baytrail/xhci.h
new file mode 100644
index 0000000000..b317361c08
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/baytrail/xhci.h
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef BAYTRAIL_XHCI_H
+#define BAYTRAIL_XHCI_H
+
+/* XHCI PCI Registers */
+#define XHCI_PWR_CTL_STS 0x74
+#define XHCI_USB2PR 0xd0
+#define XHCI_USB2PRM 0xd4
+#define XHCI_USB3PR 0xd8
+#define XHCI_USB3PRM 0xdc
+#define XHCI_USB2PDO 0xe4
+#define XHCI_USB3PDO 0xe8
+
+/* XHCI Memory Registers */
+#define XHCI_USB3_PORTSC(port) (0x4e0 + (port * 0x10))
+# define XHCI_USB3_PORTSC_CHST (0x7f << 17)
+# define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */
+# define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */
+# define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */
+# define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */
+# define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */
+# define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */
+# define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */
+# define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */
+# define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */
+# define XHCI_PLSR_RXDETECT (5 << 5) /* Port is disconnected */
+# define XHCI_PLSR_POLLING (7 << 5) /* Port is polling */
+# define XHCI_PLSW_ENABLE (5 << 5) /* Enable port */
+
+/* The Fuse register is incorrect for Baytrail-M so use hardcoded values */
+#define BYTM_USB2_PORT_COUNT 4
+#define BYTM_USB2_PORT_MAP 0xf
+#define BYTM_USB3_PORT_COUNT 1
+#define BYTM_USB3_PORT_MAP 0x1
+
+#define XHCI_RESET_TIMEOUT 100000 /* 100ms */
+
+#endif /* BAYTRAIL_XHCI_H */
diff --git a/src/soc/intel/fsp_baytrail/bootblock/bootblock.c b/src/soc/intel/fsp_baytrail/bootblock/bootblock.c
new file mode 100644
index 0000000000..1623f04da1
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/bootblock/bootblock.c
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google, Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/mtrr.h>
+#include <baytrail/iosf.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/spi.h>
+#include <baytrail/iomap.h>
+#include <baytrail/lpc.h>
+#include <reset.h>
+
+/*
+ * check for a warm reset and do a hard reset instead.
+ */
+static void check_for_warm_reset(void)
+{
+
+ /*
+ * Check if INIT# is asserted by port 0xCF9 and whether RCBA has been set.
+ * If either is true, then this is a warm reset so execute a Hard Reset
+ */
+ if ( (inb(0xcf9) == 0x04) ||
+ (pci_io_read_config32(LPC_BDF, RCBA) & RCBA_ENABLE) ) {
+ outb(0x00, 0xcf9);
+ outb(0x06, 0xcf9);
+ }
+}
+
+static void set_var_mtrr(int reg, uint32_t base, uint32_t size, int type)
+{
+ msr_t basem, maskm;
+ basem.lo = base | type;
+ basem.hi = 0;
+ wrmsr(MTRRphysBase_MSR(reg), basem);
+ maskm.lo = ~(size - 1) | MTRRphysMaskValid;
+ maskm.hi = (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1;
+ wrmsr(MTRRphysMask_MSR(reg), maskm);
+}
+
+/*
+ * Enable Prefetching and Caching.
+ */
+static void enable_spi_prefetch(void)
+{
+ uint32_t bcr = SPI_BASE_ADDRESS + BCR;
+ /* Enable caching and prefetching in the SPI controller. */
+ write32(bcr, (read32(bcr) & ~SRC_MASK) | SRC_CACHE_PREFETCH);
+}
+
+static void enable_rom_caching(void)
+{
+ msr_t msr;
+
+ disable_cache();
+ set_var_mtrr(1, 0xffffffff - CACHE_ROM_SIZE + 1,
+ CACHE_ROM_SIZE, MTRR_TYPE_WRPROT);
+ enable_cache();
+
+ /* Enable Variable MTRRs */
+ msr.hi = 0x00000000;
+ msr.lo = 0x00000800;
+ wrmsr(MTRRdefType_MSR, msr);
+}
+
+static void setup_mmconfig(void)
+{
+ uint32_t reg;
+
+ /* Set up the MMCONF range. The register lives in the BUNIT. The
+ * IO variant of the config access needs to be used initially to
+ * properly configure as the IOSF access registers live in PCI
+ * config space. */
+ reg = 0;
+ /* Clear the extended register. */
+ pci_io_write_config32(IOSF_PCI_DEV, MCRX_REG, reg);
+ reg = CONFIG_MMCONF_BASE_ADDRESS | 1;
+ pci_io_write_config32(IOSF_PCI_DEV, MDR_REG, reg);
+ reg = IOSF_OPCODE(IOSF_OP_WRITE_BUNIT) | IOSF_PORT(IOSF_PORT_BUNIT) |
+ IOSF_REG(BUNIT_MMCONF_REG) | IOSF_BYTE_EN;
+ pci_io_write_config32(IOSF_PCI_DEV, MCR_REG, reg);
+}
+
+static void bootblock_cpu_init(void)
+{
+
+ check_for_warm_reset();
+
+ /* Allow memory-mapped PCI config access. */
+ setup_mmconfig();
+ enable_rom_caching();
+ enable_spi_prefetch();
+}
diff --git a/src/soc/intel/fsp_baytrail/chip.c b/src/soc/intel/fsp_baytrail/chip.c
new file mode 100644
index 0000000000..839e8dc1a4
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/chip.c
@@ -0,0 +1,116 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/ramstage.h>
+#include <drivers/intel/fsp/fsp_util.h>
+#include "chip.h"
+
+static void pci_domain_set_resources(device_t dev)
+{
+ assign_resources(dev->link_list);
+}
+
+static void finalize_dev (device_t dev)
+{
+ /*
+ * Notify FSP for PostPciEnumeration.
+ * Northbridge APIC init should be early and late enough...
+ */
+ printk(BIOS_DEBUG, "FspNotify(EnumInitPhaseAfterPciEnumeration)\n");
+ FspNotify(EnumInitPhaseAfterPciEnumeration);
+}
+
+static struct device_operations pci_domain_ops = {
+ .read_resources = pci_domain_read_resources,
+ .set_resources = pci_domain_set_resources,
+ .enable_resources = NULL,
+ .init = NULL,
+ .final = &finalize_dev,
+ .scan_bus = pci_domain_scan_bus,
+ .ops_pci_bus = pci_bus_default_ops,
+};
+
+static void cpu_bus_noop(device_t dev) { }
+
+static struct device_operations cpu_bus_ops = {
+ .read_resources = cpu_bus_noop,
+ .set_resources = cpu_bus_noop,
+ .enable_resources = cpu_bus_noop,
+ .init = baytrail_init_cpus,
+ .scan_bus = NULL,
+};
+
+static void enable_dev(device_t dev)
+{
+ printk(BIOS_DEBUG, "enable_dev(%s, %d)\n",
+ dev_name(dev), dev->path.type);
+
+ /* Set the operations if it is a special bus type */
+ if (dev->path.type == DEVICE_PATH_DOMAIN) {
+ dev->ops = &pci_domain_ops;
+ } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
+ dev->ops = &cpu_bus_ops;
+ } else if (dev->path.type == DEVICE_PATH_PCI) {
+ /* Handle south cluster enablement. */
+ if (PCI_SLOT(dev->path.pci.devfn) > GFX_DEV &&
+ (dev->ops == NULL || dev->ops->enable == NULL)) {
+ southcluster_enable_dev(dev);
+ }
+ }
+}
+
+static void finalize_chip(void *chip_info)
+{
+ /* Notify FSP for ReadyToBoot */
+ printk(BIOS_DEBUG, "FspNotify(EnumInitPhaseReadyToBoot)\n");
+ FspNotify(EnumInitPhaseReadyToBoot);
+
+}
+
+/* Called at BS_DEV_INIT_CHIPS time -- very early. Just after BS_PRE_DEVICE. */
+static void soc_init(void *chip_info)
+{
+ baytrail_init_pre_device();
+}
+
+struct chip_operations soc_intel_fsp_baytrail_ops = {
+ CHIP_NAME("Intel BayTrail SoC")
+ .enable_dev = enable_dev,
+ .init = soc_init,
+ .final = &finalize_chip,
+};
+
+static void pci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+struct pci_operations soc_pci_ops = {
+ .set_subsystem = &pci_set_subsystem,
+};
diff --git a/src/soc/intel/fsp_baytrail/chip.h b/src/soc/intel/fsp_baytrail/chip.h
new file mode 100644
index 0000000000..7e868629f3
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/chip.h
@@ -0,0 +1,183 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _FSP_BAYTRAIL_CHIP_H_
+#define _FSP_BAYTRAIL_CHIP_H_
+
+#include <arch/acpi.h>
+
+/* The devicetree parser expects chip.h to reside directly in the path
+ * specified by the devicetree. */
+
+struct soc_intel_fsp_baytrail_config {
+
+/* ***** UPD Configuration ***** */
+
+ /* Spd addresses */
+ uint8_t MrcInitSPDAddr1;
+ uint8_t MrcInitSPDAddr2;
+ #define SPD_ADDR_DEFAULT 0x00
+ #define SPD_ADDR_DISABLED 0xFF
+
+ /* SataMode
+ * NOTE: These are offset by 1 to set 0 as "use default". This is so that
+ * if the register value is not set in the devicetree.cb file, the default
+ * value gets used. This is fixed up in the chipset_fsp_util.c code.
+ *
+ * 0x0 "IDE"
+ * 0x1 "AHCI"
+ */
+ uint8_t SataMode;
+ #define SATA_MODE_DEFAULT 0x00
+ #define SATA_MODE_IDE 0x01
+ #define SATA_MODE_AHCI 0x02
+
+ /*
+ * MrcInitTsegSize
+ * 0x01, "1 MB"
+ * 0x02, "2 MB"
+ * 0x04, "4 MB"
+ * 0x08, "8 MB"
+ */
+ uint16_t MrcInitTsegSize;
+ #define TSEG_SIZE_DEFAULT 0
+ #define TSEG_SIZE_1_MB 1
+ #define TSEG_SIZE_2_MB 2
+ #define TSEG_SIZE_4_MB 4
+ #define TSEG_SIZE_8_MB 8
+
+ /*
+ * MrcInitMmioSize
+ * 0x400, "1.0 GB"s
+ * 0x600, "1.5 GB"
+ * 0x800, "2.0 GB"
+ */
+ uint16_t MrcInitMmioSize;
+ #define MMIO_SIZE_DEFAULT 0x00
+ #define MMIO_SIZE_1_0_GB 0x400
+ #define MMIO_SIZE_1_5_GB 0x600
+ #define MMIO_SIZE_2_0_GB 0x800
+
+ /*
+ * eMMCBootMode
+ * NOTE: These are offset by 1 to set 0 as "use default". This is so that
+ * if the register value is not set in the devicetree.cb file, the default
+ * value gets used. This is fixed up in the chipset_fsp_util.c code
+ *
+ * 0x0 "Disabled"
+ * 0x1 "Auto"
+ * 0x2 "eMMC 4.1"
+ * 0x3 "eMMC 4.5"
+ */
+ uint8_t eMMCBootMode;
+ #define EMMC_USE_DEFAULT 0
+ #define EMMC_DISABLED 1
+ #define EMMC_AUTO 2
+ #define EMMC_4_1 3
+ #define EMMC_4_5 4
+ #define EMMC_FOLLOWS_DEVICETREE 5
+
+ /*
+ * IgdDvmt50PreAlloc
+ * 0x01, "32 MB"
+ * 0x02, "64 MB"
+ * 0x03, "96 MB"
+ * 0x04, "128 MB"
+ * 0x05, "160 MB"
+ * 0x06, "192 MB"
+ * 0x07, "224 MB"
+ * 0x08, "256 MB"
+ * 0x09, "288 MB"
+ * 0x0A, "320 MB"
+ * 0x0B, "352 MB"
+ * 0x0C, "384 MB"
+ * 0x0D, "416 MB"
+ * 0x0E, "448 MB"
+ * 0x0F, "480 MB"
+ * 0x10, "512 MB"
+ */
+ uint8_t IgdDvmt50PreAlloc;
+ #define IGD_MEMSIZE_DEFAULT 0x00
+ #define IGD_MEMSIZE_32MB 0x01
+ #define IGD_MEMSIZE_64MB 0x02
+ #define IGD_MEMSIZE_96MB 0x03
+ #define IGD_MEMSIZE_128MB 0x04
+ #define IGD_MEMSIZE_160MB 0x05
+ #define IGD_MEMSIZE_192MB 0x06
+ #define IGD_MEMSIZE_224MB 0x07
+ #define IGD_MEMSIZE_256MB 0x08
+ #define IGD_MEMSIZE_288MB 0x09
+ #define IGD_MEMSIZE_320MB 0x0A
+ #define IGD_MEMSIZE_352MB 0x0B
+ #define IGD_MEMSIZE_384MB 0x0C
+ #define IGD_MEMSIZE_416MB 0x0D
+ #define IGD_MEMSIZE_448MB 0x0E
+ #define IGD_MEMSIZE_480MB 0x0F
+ #define IGD_MEMSIZE_512MB 0x10
+ #define IGD_MEMSIZE_MULTIPLIER 32
+
+ /*
+ * Selection 0x1 , "128 MB"
+ * Selection 0x2 , "256 MB"
+ * Selection 0x3 , "512 MB"
+ */
+ uint8_t ApertureSize;
+ #define APERTURE_SIZE_DEFAULT 0
+ #define APERTURE_SIZE_128MB 1
+ #define APERTURE_SIZE_256MB 2
+ #define APERTURE_SIZE_512MB 3
+ #define APERTURE_SIZE_BASE 64
+
+ /*
+ * Selection 0x1 , "1 MB"
+ * Selection 0x2 , "2 MB"
+ */
+ uint8_t GttSize;
+ #define GTT_SIZE_DEFAULT 0
+ #define GTT_SIZE_1MB 1
+ #define GTT_SIZE_2MB 2
+
+ /*
+ * Enable PCI Mode for LPSS SIO devices.
+ * If disabled, LPSS SIO devices will run in ACPI mode.
+ */
+ uint8_t LpssSioEnablePciMode;
+ #define LPSS_PCI_MODE_DEFAULT 0x00
+ #define LPSS_PCI_MODE_DISABLE 0x01
+ #define LPSS_PCI_MODE_ENABLE 0x02
+
+ /* modifiers for various enables */
+ uint8_t AzaliaAutoEnable;
+ #define AZALIA_FOLLOWS_DEVICETREE 0
+ #define AZALIA_FSP_AUTO_ENABLE 1
+
+ uint8_t LpeAcpiModeEnable;
+ #define LPE_ACPI_MODE_DISABLED 1
+ #define LPE_ACPI_MODE_ENABLED 2
+
+/* ***** ACPI configuration ***** */
+ /* Options for these are in src/arch/x86/include/arch/acpi.h */
+ uint8_t fadt_pm_profile;
+ uint16_t fadt_boot_arch;
+
+};
+
+extern struct chip_operations soc_intel_fsp_baytrail_ops;
+#endif /* _FSP_BAYTRAIL_CHIP_H_ */
diff --git a/src/soc/intel/fsp_baytrail/cpu.c b/src/soc/intel/fsp_baytrail/cpu.c
new file mode 100644
index 0000000000..f260880d39
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/cpu.c
@@ -0,0 +1,278 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <console/console.h>
+#include <cpu/cpu.h>
+#include <cpu/intel/microcode.h>
+#include <cpu/intel/turbo.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/mp.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/smm.h>
+#include <reg_script.h>
+
+#include <baytrail/msr.h>
+#include <baytrail/pattrs.h>
+#include <baytrail/ramstage.h>
+#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
+#include <baytrail/smm.h>
+
+static void smm_relocate(void *unused);
+static void enable_smis(void *unused);
+
+static struct mp_flight_record mp_steps[] = {
+ MP_FR_BLOCK_APS(smm_relocate, NULL, smm_relocate, NULL),
+ MP_FR_BLOCK_APS(mp_initialize_cpu, NULL, mp_initialize_cpu, NULL),
+ /* Wait for APs to finish initialization before proceeding. */
+ MP_FR_BLOCK_APS(NULL, NULL, enable_smis, NULL),
+};
+#else /* CONFIG_HAVE_SMI_HANDLER */
+static struct mp_flight_record mp_steps[] = {
+ MP_FR_BLOCK_APS(mp_initialize_cpu, NULL, mp_initialize_cpu, NULL),
+};
+#endif
+
+/* The APIC id space on Bay Trail is sparse. Each id is separated by 2. */
+static int adjust_apic_id(int index, int apic_id)
+{
+ return 2 * index;
+}
+
+/* Core level MSRs */
+const struct reg_script core_msr_script[] = {
+ /* Dynamic L2 shrink enable and threshold */
+ REG_MSR_RMW(MSR_PMG_CST_CONFIG_CONTROL, ~0x3f000f, 0xe0008),
+ /* Disable C1E */
+ REG_MSR_RMW(MSR_POWER_CTL, ~0x2, 0),
+ REG_MSR_OR(MSR_POWER_MISC, 0x44),
+ REG_SCRIPT_END
+};
+
+void baytrail_init_cpus(device_t dev)
+{
+ struct bus *cpu_bus = dev->link_list;
+ const struct pattrs *pattrs = pattrs_get();
+ struct mp_params mp_params;
+
+ x86_mtrr_check();
+
+ /* Enable the local cpu apics */
+ setup_lapic();
+
+ mp_params.num_cpus = pattrs->num_cpus,
+ mp_params.parallel_microcode_load = 0,
+ mp_params.adjust_apic_id = adjust_apic_id;
+ mp_params.flight_plan = &mp_steps[0];
+ mp_params.num_records = ARRAY_SIZE(mp_steps);
+ mp_params.microcode_pointer = 0;
+
+ if (mp_init(cpu_bus, &mp_params)) {
+ printk(BIOS_ERR, "MP initialization failure.\n");
+ }
+}
+
+static void baytrail_core_init(device_t cpu)
+{
+ printk(BIOS_DEBUG, "Init BayTrail core.\n");
+
+ /* On bay trail the turbo disable bit is actually scoped at building
+ * block level -- not package. For non-bsp cores that are within a
+ * building block enable turbo. The cores within the BSP's building
+ * block will just see it already enabled and move on. */
+ if (lapicid())
+ enable_turbo();
+
+ /* Set core MSRs */
+ reg_script_run(core_msr_script);
+
+ /* Set this core to max frequency ratio */
+ set_max_freq();
+}
+
+static struct device_operations cpu_dev_ops = {
+ .init = baytrail_core_init,
+};
+
+static struct cpu_device_id cpu_table[] = {
+ { X86_VENDOR_INTEL, 0x30671 },
+ { X86_VENDOR_INTEL, 0x30672 },
+ { X86_VENDOR_INTEL, 0x30673 },
+ { X86_VENDOR_INTEL, 0x30678 },
+ { 0, 0 },
+};
+
+static const struct cpu_driver driver __cpu_driver = {
+ .ops = &cpu_dev_ops,
+ .id_table = cpu_table,
+};
+
+#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
+/*
+ * SMM loading and initialization.
+ */
+
+struct smm_relocation_attrs {
+ uint32_t smbase;
+ uint32_t smrr_base;
+ uint32_t smrr_mask;
+};
+
+static struct smm_relocation_attrs relo_attrs;
+
+static void adjust_apic_id_map(struct smm_loader_params *smm_params)
+{
+ int i;
+ struct smm_runtime *runtime = smm_params->runtime;
+
+ for (i = 0; i < CONFIG_MAX_CPUS; i++)
+ runtime->apic_id_to_cpu[i] = mp_get_apic_id(i);
+}
+
+static void asmlinkage
+cpu_smm_do_relocation(void *arg, int cpu, const struct smm_runtime *runtime)
+{
+#ifndef CONFIG_MAX_CPUS
+#error CONFIG_MAX_CPUS must be set.
+#endif
+ msr_t smrr;
+ em64t100_smm_state_save_area_t *smm_state;
+
+ if (cpu >= CONFIG_MAX_CPUS) {
+ printk(BIOS_CRIT,
+ "Invalid CPU number assigned in SMM stub: %d\n", cpu);
+ return;
+ }
+
+ /* Set up SMRR. */
+ smrr.lo = relo_attrs.smrr_base;
+ smrr.hi = 0;
+ wrmsr(SMRRphysBase_MSR, smrr);
+ smrr.lo = relo_attrs.smrr_mask;
+ smrr.hi = 0;
+ wrmsr(SMRRphysMask_MSR, smrr);
+
+ /* The relocated handler runs with all CPUs concurrently. Therefore
+ * stagger the entry points adjusting SMBASE downwards by save state
+ * size * CPU num. */
+ smm_state = (void *)(SMM_EM64T100_SAVE_STATE_OFFSET + runtime->smbase);
+ smm_state->smbase = relo_attrs.smbase - cpu * runtime->save_state_size;
+ printk(BIOS_DEBUG, "New SMBASE 0x%08x\n", smm_state->smbase);
+}
+
+static int install_relocation_handler(int num_cpus)
+{
+ const int save_state_size = sizeof(em64t100_smm_state_save_area_t);
+
+ struct smm_loader_params smm_params = {
+ .per_cpu_stack_size = save_state_size,
+ .num_concurrent_stacks = num_cpus,
+ .per_cpu_save_state_size = save_state_size,
+ .num_concurrent_save_states = 1,
+ .handler = (smm_handler_t)&cpu_smm_do_relocation,
+ };
+
+ if (smm_setup_relocation_handler(&smm_params))
+ return -1;
+
+ adjust_apic_id_map(&smm_params);
+
+ return 0;
+}
+
+static int install_permanent_handler(int num_cpus)
+{
+#ifndef CONFIG_SMM_RESERVED_SIZE
+#error CONFIG_SMM_RESERVED_SIZE must be set.
+#endif
+ /* There are num_cpus concurrent stacks and num_cpus concurrent save
+ * state areas. Lastly, set the stack size to the save state size. */
+ int save_state_size = sizeof(em64t100_smm_state_save_area_t);
+ struct smm_loader_params smm_params = {
+ .per_cpu_stack_size = save_state_size,
+ .num_concurrent_stacks = num_cpus,
+ .per_cpu_save_state_size = save_state_size,
+ .num_concurrent_save_states = num_cpus,
+ };
+ const int tseg_size = smm_region_size() - CONFIG_SMM_RESERVED_SIZE;
+
+ printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n",
+ relo_attrs.smbase);
+
+ if (smm_load_module((void *)relo_attrs.smbase, tseg_size, &smm_params))
+ return -1;
+
+ adjust_apic_id_map(&smm_params);
+
+ return 0;
+}
+
+static int smm_load_handlers(void)
+{
+ /* All range registers are aligned to 4KiB */
+ const uint32_t rmask = ~((1 << 12) - 1);
+ const struct pattrs *pattrs = pattrs_get();
+
+ /* Initialize global tracking state. */
+ relo_attrs.smbase = (uint32_t)smm_region_start();
+ relo_attrs.smrr_base = relo_attrs.smbase | MTRR_TYPE_WRBACK;
+ relo_attrs.smrr_mask = ~(smm_region_size() - 1) & rmask;
+ relo_attrs.smrr_mask |= MTRRphysMaskValid;
+
+ /* Install handlers. */
+ if (install_relocation_handler(pattrs->num_cpus) < 0) {
+ printk(BIOS_ERR, "Unable to install SMM relocation handler.\n");
+ return -1;
+ }
+
+ if (install_permanent_handler(pattrs->num_cpus) < 0) {
+ printk(BIOS_ERR, "Unable to install SMM permanent handler.\n");
+ return -1;
+ }
+
+ /* Ensure the SMM handlers hit DRAM before performing first SMI. */
+ wbinvd();
+
+ return 0;
+}
+
+static void smm_relocate(void *unused)
+{
+
+ /* Load relocation and permanent handler. */
+ if (boot_cpu()) {
+ if (smm_load_handlers() < 0) {
+ printk(BIOS_ERR, "Error loading SMM handlers.\n");
+ return;
+ }
+ southcluster_smm_clear_state();
+ }
+
+ /* Relocate SMM space. */
+ smm_initiate_relocation();
+}
+
+static void enable_smis(void *unused)
+{
+ southcluster_smm_enable_smi();
+}
+#endif
diff --git a/src/soc/intel/fsp_baytrail/fsp/Kconfig b/src/soc/intel/fsp_baytrail/fsp/Kconfig
new file mode 100644
index 0000000000..5df6374d0d
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/fsp/Kconfig
@@ -0,0 +1,31 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2014 Sage Electronic Engineering, LLC.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config BAYTRAIL_FSP_SPECIFIC_OPTIONS
+ def_bool y
+ select PLATFORM_USES_FSP
+ select USE_GENERIC_FSP_CAR_INC
+ select FSP_USES_UPD
+
+config FSP_FILE
+ string
+ default "../intel/fsp/baytrail/FvFsp.bin"
+ help
+ The path and filename of the Intel FSP binary for this platform.
+
diff --git a/src/soc/intel/fsp_baytrail/fsp/Makefile.inc b/src/soc/intel/fsp_baytrail/fsp/Makefile.inc
new file mode 100644
index 0000000000..ebdc80a721
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/fsp/Makefile.inc
@@ -0,0 +1,22 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+ramstage-y += chipset_fsp_util.c
+romstage-y += chipset_fsp_util.c
+
diff --git a/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c b/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c
new file mode 100644
index 0000000000..87fe5aec50
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c
@@ -0,0 +1,335 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <string.h>
+#include <cpu/x86/stack.h>
+#include <console/console.h>
+#include <bootstate.h>
+#include <cbmem.h>
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <baytrail/pci_devs.h>
+#include <drivers/intel/fsp/fsp_util.h>
+#include "../chip.h"
+#include <baytrail/reset.h>
+
+#ifdef __PRE_RAM__
+#include <baytrail/romstage.h>
+#endif
+
+#ifdef __PRE_RAM__
+
+/* Copy the default UPD region and settings to a buffer for modification */
+static void GetUpdDefaultFromFsp (FSP_INFO_HEADER *FspInfo, UPD_DATA_REGION *UpdData)
+{
+ VPD_DATA_REGION *VpdDataRgnPtr;
+ UPD_DATA_REGION *UpdDataRgnPtr;
+ VpdDataRgnPtr = (VPD_DATA_REGION *)(UINT32)(FspInfo->CfgRegionOffset + FspInfo->ImageBase);
+ UpdDataRgnPtr = (UPD_DATA_REGION *)(UINT32)(VpdDataRgnPtr->PcdUpdRegionOffset + FspInfo->ImageBase);
+ memcpy((void*)UpdData, (void*)UpdDataRgnPtr, sizeof(UPD_DATA_REGION));
+}
+
+/* default to just enabling HDMI audio */
+const PCH_AZALIA_CONFIG mAzaliaConfig = {
+ .Pme = 1,
+ .DS = 1,
+ .DA = 0,
+ .HdmiCodec = 1,
+ .AzaliaVCi = 1,
+ .Rsvdbits = 0,
+ .AzaliaVerbTableNum = 0,
+ .AzaliaVerbTable = NULL,
+ .ResetWaitTimer = 300
+};
+
+typedef struct soc_intel_fsp_baytrail_config config_t;
+
+/**
+ * Update the UPD data based on values from devicetree.cb
+ *
+ * @param UpdData Pointer to the UPD Data structure
+ */
+static void ConfigureDefaultUpdData(UPD_DATA_REGION *UpdData)
+{
+ ROMSTAGE_CONST struct device *dev;
+ ROMSTAGE_CONST config_t *config;
+ printk(BIOS_DEBUG, "Configure Default UPD Data\n");
+
+ dev = dev_find_slot(0, SOC_DEV_FUNC);
+ config = dev->chip_info;
+
+ /* Set up default verb tables - Just HDMI audio */
+ UpdData->AzaliaConfigPtr = (UINT32)&mAzaliaConfig;
+
+ /* Set SPD addresses */
+ if (config->MrcInitSPDAddr1 == SPD_ADDR_DISABLED)
+ UpdData->PcdMrcInitSPDAddr1 = 0x00;
+ else if (config->MrcInitSPDAddr1 != SPD_ADDR_DEFAULT)
+ UpdData->PcdMrcInitSPDAddr1 = config->MrcInitSPDAddr1;
+ printk(BIOS_DEBUG, "SPD Addr1:\t\t0x%02x\n", UpdData->PcdMrcInitSPDAddr1);
+
+ if (config->MrcInitSPDAddr2 == SPD_ADDR_DISABLED)
+ UpdData->PcdMrcInitSPDAddr2 = 0x00;
+ else if (config->MrcInitSPDAddr2 != SPD_ADDR_DEFAULT)
+ UpdData->PcdMrcInitSPDAddr2 = config->MrcInitSPDAddr2;
+ printk(BIOS_DEBUG, "SPD Addr2:\t\t0x%02x\n", UpdData->PcdMrcInitSPDAddr2);
+
+ if (config->SataMode != SATA_MODE_DEFAULT)
+ UpdData->PcdSataMode = config->SataMode - SATA_MODE_IDE;
+
+ if ((config->eMMCBootMode != EMMC_USE_DEFAULT) ||
+ (config->eMMCBootMode != EMMC_FOLLOWS_DEVICETREE))
+ UpdData->PcdeMMCBootMode = config->eMMCBootMode;
+
+ if (config->LpssSioEnablePciMode != LPSS_PCI_MODE_DEFAULT)
+ UpdData->PcdLpssSioEnablePciMode = config->LpssSioEnablePciMode -
+ LPSS_PCI_MODE_DISABLE;
+
+ if (config->MrcInitTsegSize != TSEG_SIZE_DEFAULT)
+ UpdData->PcdMrcInitTsegSize = config->MrcInitTsegSize;
+ printk(BIOS_DEBUG, "Tseg Size:\t\t%d MB\n", UpdData->PcdMrcInitTsegSize);
+
+ if (config->MrcInitMmioSize != MMIO_SIZE_DEFAULT)
+ UpdData->PcdMrcInitMmioSize = config->MrcInitMmioSize;
+ printk(BIOS_DEBUG, "MMIO Size:\t\t%d MB\n", UpdData->PcdMrcInitMmioSize);
+
+ if (config->IgdDvmt50PreAlloc != IGD_MEMSIZE_DEFAULT)
+ UpdData->PcdIgdDvmt50PreAlloc = config->IgdDvmt50PreAlloc;
+ printk(BIOS_DEBUG, "IGD Memory Size:\t%d MB\n",
+ UpdData->PcdIgdDvmt50PreAlloc * IGD_MEMSIZE_MULTIPLIER);
+
+ if (config->ApertureSize != APERTURE_SIZE_DEFAULT)
+ UpdData->PcdApertureSize = config->ApertureSize;
+ printk(BIOS_DEBUG, "Aperture Size:\t\t%d MB\n",
+ APERTURE_SIZE_BASE << UpdData->PcdApertureSize);
+
+ if (config->GttSize != GTT_SIZE_DEFAULT)
+ UpdData->PcdGttSize = config->GttSize;
+ printk(BIOS_DEBUG, "GTT Size:\t\t%d MB\n", UpdData->PcdGttSize);
+
+ /* Advance dev to PCI device 0.0 */
+ for (dev = &dev_root; dev; dev = dev_find_next_pci_device(dev)){
+ if (dev->path.type != DEVICE_PATH_PCI)
+ continue;
+ if (dev->path.pci.devfn == PCI_DEVFN(0x0,0))
+ break;
+ }
+
+ /*
+ * Loop through all the SOC devices in the devicetree
+ * enabling and disabling them as requested.
+ */
+ for (; dev; dev = dev->sibling) {
+
+ if (dev->path.type != DEVICE_PATH_PCI)
+ continue;
+
+ switch (dev->path.pci.devfn) {
+ case MIPI_DEV_FUNC: /* Camera / Image Signal Processing */
+ UpdData->ISPEnable = dev->enabled;
+ printk(BIOS_DEBUG, "MIPI/ISP:\t\t%s\n",
+ UpdData->PcdEnableSdio?"Enabled":"Disabled");
+ break;
+ case EMMC_DEV_FUNC: /* EMMC 4.1*/
+ if ((dev->enabled) &&
+ (config->eMMCBootMode == EMMC_FOLLOWS_DEVICETREE))
+ UpdData->PcdeMMCBootMode = EMMC_4_1 - EMMC_DISABLED;
+ break;
+ case SDIO_DEV_FUNC:
+ UpdData->PcdEnableSdio = dev->enabled;
+ printk(BIOS_DEBUG, "Sdio:\t\t\t%s\n",
+ UpdData->PcdEnableSdio?"Enabled":"Disabled");
+ break;
+ case SD_DEV_FUNC:
+ UpdData->PcdEnableSdcard = dev->enabled;
+ printk(BIOS_DEBUG, "Sdcard:\t\t\t%s\n",
+ UpdData->PcdEnableSdcard?"Enabled":"Disabled");
+ break;
+ case SATA_DEV_FUNC:
+ UpdData->PcdEnableSata = dev->enabled;
+ printk(BIOS_DEBUG, "Sata:\t\t\t%s\n",
+ UpdData->PcdEnableSata?"Enabled":"Disabled");
+ if (UpdData->PcdEnableSata)
+ printk(BIOS_DEBUG, "SATA Mode:\t\t%s\n",
+ UpdData->PcdSataMode?"AHCI":"IDE");
+ break;
+ case XHCI_DEV_FUNC:
+ UpdData->PcdEnableXhci = dev->enabled;
+ break;
+ case LPE_DEV_FUNC:
+ if (dev->enabled && config->LpeAcpiModeEnable ==
+ LPE_ACPI_MODE_ENABLED)
+ UpdData->PcdEnableLpe = LPE_ACPI_MODE_ENABLED;
+ else
+ UpdData->PcdEnableLpe = dev->enabled;
+ printk(BIOS_DEBUG, "Lpe:\t\t\t%s\n",
+ UpdData->PcdEnableLpe?"Enabled":"Disabled");
+ printk(BIOS_DEBUG, "Lpe mode:\t\t%s\n",
+ UpdData->PcdEnableLpe == LPE_ACPI_MODE_ENABLED?
+ "ACPI":"PCI");
+ break;
+ case MMC45_DEV_FUNC: /* MMC 4.5*/
+ if ((dev->enabled) &&
+ (config->eMMCBootMode == EMMC_FOLLOWS_DEVICETREE))
+ UpdData->PcdeMMCBootMode = EMMC_4_5 - EMMC_DISABLED;
+ break;
+ case SIO_DMA1_DEV_FUNC:
+ UpdData->PcdEnableDma0 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO Dma 0:\t\t%s\n",
+ UpdData->PcdEnableDma0?"Enabled":"Disabled");
+ break;
+ case I2C1_DEV_FUNC:
+ UpdData->PcdEnableI2C0 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO I2C0:\t\t%s\n",
+ UpdData->PcdEnableI2C0?"Enabled":"Disabled");
+ break;
+ case I2C2_DEV_FUNC:
+ UpdData->PcdEnableI2C1 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO I2C1:\t\t%s\n",
+ UpdData->PcdEnableI2C1?"Enabled":"Disabled");
+ break;
+ case I2C3_DEV_FUNC:
+ UpdData->PcdEnableI2C2 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO I2C2:\t\t%s\n",
+ UpdData->PcdEnableI2C2?"Enabled":"Disabled");
+ break;
+ case I2C4_DEV_FUNC:
+ UpdData->PcdEnableI2C3 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO I2C3:\t\t%s\n",
+ UpdData->PcdEnableI2C3?"Enabled":"Disabled");
+ break;
+ case I2C5_DEV_FUNC:
+ UpdData->PcdEnableI2C4 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO I2C4:\t\t%s\n",
+ UpdData->PcdEnableI2C4?"Enabled":"Disabled");
+ break;
+ case I2C6_DEV_FUNC:
+ UpdData->PcdEnableI2C5 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO I2C5:\t\t%s\n",
+ UpdData->PcdEnableI2C5?"Enabled":"Disabled");
+ break;
+ case I2C7_DEV_FUNC:
+ UpdData->PcdEnableI2C6 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO I2C6:\t\t%s\n",
+ UpdData->PcdEnableI2C6?"Enabled":"Disabled");
+ break;
+ case TXE_DEV_FUNC: /* TXE */
+ break;
+ case HDA_DEV_FUNC:
+ if (config->AzaliaAutoEnable) {
+ UpdData->PcdEnableAzalia = 2;
+ printk(BIOS_DEBUG, "Azalia:\t\t\tAuto\n");
+ } else {
+ UpdData->PcdEnableAzalia = dev->enabled;
+ printk(BIOS_DEBUG, "Azalia:\t\t\t%s\n",
+ UpdData->PcdEnableAzalia?"Enabled":"Disabled");
+ }
+ break;
+ case PCIE_PORT1_DEV_FUNC:
+ case PCIE_PORT2_DEV_FUNC:
+ case PCIE_PORT3_DEV_FUNC:
+ case PCIE_PORT4_DEV_FUNC:
+ break;
+ case EHCI_DEV_FUNC:
+ UpdData->PcdEnableXhci = !(dev->enabled);
+ break;
+ case SIO_DMA2_DEV_FUNC:
+ UpdData->PcdEnableDma1 = dev->enabled;
+ printk(BIOS_DEBUG, "SIO Dma1:\t\t%s\n",
+ UpdData->PcdEnableDma1?"Enabled":"Disabled");
+ break;
+ case PWM1_DEV_FUNC:
+ UpdData->PcdEnablePwm0 = dev->enabled;
+ printk(BIOS_DEBUG, "Pwm0\t\t\t%s\n",
+ UpdData->PcdEnablePwm0?"Enabled":"Disabled");
+ break;
+ case PWM2_DEV_FUNC:
+ UpdData->PcdEnablePwm1 = dev->enabled;
+ printk(BIOS_DEBUG, "Pwm1:\t\t\t%s\n",
+ UpdData->PcdEnablePwm1?"Enabled":"Disabled");
+ break;
+ case HSUART1_DEV_FUNC:
+ UpdData->PcdEnableHsuart0 = dev->enabled;
+ printk(BIOS_DEBUG, "Hsuart0:\t\t%s\n",
+ UpdData->PcdEnableHsuart0?"Enabled":"Disabled");
+ break;
+ case HSUART2_DEV_FUNC:
+ UpdData->PcdEnableHsuart1 = dev->enabled;
+ printk(BIOS_DEBUG, "Hsuart1:\t\t%s\n",
+ UpdData->PcdEnableHsuart1?"Enabled":"Disabled");
+ break;
+ case SPI_DEV_FUNC:
+ UpdData->PcdEnableSpi = dev->enabled;
+ printk(BIOS_DEBUG, "Spi:\t\t\t%s\n",
+ UpdData->PcdEnableSpi?"Enabled":"Disabled");
+ break;
+ case LPC_DEV_FUNC: /* LPC */
+ break;
+ case SMBUS_DEV_FUNC:
+ break;
+ }
+ }
+
+ if(UpdData->PcdeMMCBootMode == EMMC_AUTO - EMMC_DISABLED) {
+ printk(BIOS_DEBUG, "eMMC Mode:\t\tAuto");
+ } else {
+ printk(BIOS_DEBUG, "eMMC 4.1:\t\t%s\n",
+ UpdData->PcdeMMCBootMode == EMMC_4_1 - EMMC_DISABLED?
+ "Enabled":"Disabled");
+ printk(BIOS_DEBUG, "eMMC 4.5:\t\t%s\n",
+ UpdData->PcdeMMCBootMode == EMMC_4_5 - EMMC_DISABLED?
+ "Enabled":"Disabled");
+ }
+ printk(BIOS_DEBUG, "Xhci:\t\t\t%s\n",
+ UpdData->PcdEnableXhci?"Enabled":"Disabled");
+
+}
+
+/* Set up the Baytrail specific structures for the call into the FSP */
+void chipset_fsp_early_init(FSP_INIT_PARAMS *pFspInitParams,
+ FSP_INFO_HEADER *fsp_ptr)
+{
+ FSP_INIT_RT_BUFFER *pFspRtBuffer = pFspInitParams->RtBufferPtr;
+
+ /* Initialize the UPD Data */
+ GetUpdDefaultFromFsp (fsp_ptr, pFspRtBuffer->Common.UpdDataRgnPtr);
+ ConfigureDefaultUpdData(pFspRtBuffer->Common.UpdDataRgnPtr);
+ pFspInitParams->NvsBufferPtr = NULL;
+ pFspRtBuffer->Common.BootMode = BOOT_WITH_FULL_CONFIGURATION;
+
+#if IS_ENABLED(CONFIG_ENABLE_FAST_BOOT)
+ /* Find the fastboot cache that was saved in the ROM */
+ pFspInitParams->NvsBufferPtr = find_and_set_fastboot_cache();
+#endif
+
+ return;
+}
+
+/* The FSP returns here after the fsp_early_init call */
+void ChipsetFspReturnPoint(EFI_STATUS Status,
+ VOID *HobListPtr)
+{
+ if (Status == 0xFFFFFFFF) {
+ warm_reset();
+ }
+ romstage_main_continue(Status, HobListPtr);
+}
+
+#endif /* __PRE_RAM__ */
diff --git a/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.h b/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.h
new file mode 100644
index 0000000000..1b603986ea
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.h
@@ -0,0 +1,49 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef CHIPSET_FSP_UTIL_H
+#define CHIPSET_FSP_UTIL_H
+
+#include <fsp.h>
+#include <fsptypes.h>
+#include <fspfv.h>
+#include <fspffs.h>
+#include <fspapi.h>
+#include <fspplatform.h>
+#include <fspinfoheader.h>
+#include <fsphob.h>
+#include <fspvpd.h>
+#include <azalia.h>
+
+#define FSP_RESERVE_MEMORY_SIZE 0x200000
+
+#define FSP_INFO_HEADER_GUID \
+ { \
+ 0x912740BE, 0x2284, 0x4734, {0xB9, 0x71, 0x84, 0xB0, 0x27, 0x35, 0x3F, 0x0C} \
+ }
+
+/*
+ * The FSP Image ID is different for each platform's FSP and
+ * can be used to verify that the right FSP binary is loaded.
+ * For the Bay Trail FSP, the Image Id is "VLYVIEW0".
+ */
+#define FSP_IMAGE_ID_DWORD0 0x56594C56 /* 'VLYV' */
+#define FSP_IMAGE_ID_DWORD1 0x30574549 /* 'IEW0' */
+
+#endif /* CHIPSET_FSP_UTIL_H */
diff --git a/src/soc/intel/fsp_baytrail/gpio.c b/src/soc/intel/fsp_baytrail/gpio.c
new file mode 100644
index 0000000000..69e9ac6f40
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/gpio.c
@@ -0,0 +1,239 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/pci.h>
+#include <console/console.h>
+#include <baytrail/gpio.h>
+#include <baytrail/pmc.h>
+
+/* GPIO-to-Pad LUTs */
+static const u8 gpncore_gpio_to_pad[GPNCORE_COUNT] =
+ { 19, 18, 17, 20, 21, 22, 24, 25, /* [ 0: 7] */
+ 23, 16, 14, 15, 12, 26, 27, 1, /* [ 8:15] */
+ 4, 8, 11, 0, 3, 6, 10, 13, /* [16:23] */
+ 2, 5, 9 }; /* [24:26] */
+
+static const u8 gpscore_gpio_to_pad[GPSCORE_COUNT] =
+ { 85, 89, 93, 96, 99, 102, 98, 101, /* [ 0: 7] */
+ 34, 37, 36, 38, 39, 35, 40, 84, /* [ 8: 15] */
+ 62, 61, 64, 59, 54, 56, 60, 55, /* [16: 23] */
+ 63, 57, 51, 50, 53, 47, 52, 49, /* [24: 31] */
+ 48, 43, 46, 41, 45, 42, 58, 44, /* [32: 39] */
+ 95, 105, 70, 68, 67, 66, 69, 71, /* [40: 47] */
+ 65, 72, 86, 90, 88, 92, 103, 77, /* [48: 55] */
+ 79, 83, 78, 81, 80, 82, 13, 12, /* [56: 63] */
+ 15, 14, 17, 18, 19, 16, 2, 1, /* [64: 71] */
+ 0, 4, 6, 7, 9, 8, 33, 32, /* [72: 79] */
+ 31, 30, 29, 27, 25, 28, 26, 23, /* [80: 87] */
+ 21, 20, 24, 22, 5, 3, 10, 11, /* [88: 95] */
+ 106, 87, 91, 104, 97, 100 }; /* [96:101] */
+
+static const u8 gpssus_gpio_to_pad[GPSSUS_COUNT] =
+ { 29, 33, 30, 31, 32, 34, 36, 35, /* [ 0: 7] */
+ 38, 37, 18, 7, 11, 20, 17, 1, /* [ 8:15] */
+ 8, 10, 19, 12, 0, 2, 23, 39, /* [16:23] */
+ 28, 27, 22, 21, 24, 25, 26, 51, /* [24:31] */
+ 56, 54, 49, 55, 48, 57, 50, 58, /* [32:39] */
+ 52, 53, 59, 40 }; /* [40:43] */
+
+/* GPIO bank descriptions */
+static const struct gpio_bank gpncore_bank = {
+ .gpio_count = GPNCORE_COUNT,
+ .gpio_to_pad = gpncore_gpio_to_pad,
+ .legacy_base = GP_LEGACY_BASE_NONE,
+ .pad_base = GPNCORE_PAD_BASE,
+ .has_wake_en = 0,
+ .gpio_f1_range_start = GPNCORE_GPIO_F1_RANGE_START,
+ .gpio_f1_range_end = GPNCORE_GPIO_F1_RANGE_END,
+};
+
+static const struct gpio_bank gpscore_bank = {
+ .gpio_count = GPSCORE_COUNT,
+ .gpio_to_pad = gpscore_gpio_to_pad,
+ .legacy_base = GPSCORE_LEGACY_BASE,
+ .pad_base = GPSCORE_PAD_BASE,
+ .has_wake_en = 0,
+ .gpio_f1_range_start = GPSCORE_GPIO_F1_RANGE_START,
+ .gpio_f1_range_end = GPSCORE_GPIO_F1_RANGE_END,
+};
+
+static const struct gpio_bank gpssus_bank = {
+ .gpio_count = GPSSUS_COUNT,
+ .gpio_to_pad = gpssus_gpio_to_pad,
+ .legacy_base = GPSSUS_LEGACY_BASE,
+ .pad_base = GPSSUS_PAD_BASE,
+ .has_wake_en = 1,
+ .gpio_f1_range_start = GPSSUS_GPIO_F1_RANGE_START,
+ .gpio_f1_range_end = GPSSUS_GPIO_F1_RANGE_END,
+};
+
+static void setup_gpios(const struct soc_gpio_map *gpios,
+ const struct gpio_bank *bank)
+{
+ const struct soc_gpio_map *config;
+ int gpio = 0;
+ u32 reg, pad_conf0;
+ u8 set, bit;
+
+ u32 use_sel[4] = {0};
+ u32 io_sel[4] = {0};
+ u32 gp_lvl[4] = {0};
+ u32 tpe[4] = {0};
+ u32 tne[4] = {0};
+ u32 wake_en[4] = {0};
+
+ if (!gpios)
+ return;
+
+ for (config = gpios; config->pad_conf0 != GPIO_LIST_END;
+ config++, gpio++) {
+ if (gpio > bank->gpio_count)
+ break;
+
+ set = gpio >> 5;
+ bit = gpio % 32;
+
+ if (bank->legacy_base != GP_LEGACY_BASE_NONE) {
+ /* Legacy IO configuration */
+ use_sel[set] |= config->use_sel << bit;
+ io_sel[set] |= config->io_sel << bit;
+ gp_lvl[set] |= config->gp_lvl << bit;
+ tpe[set] |= config->tpe << bit;
+ tne[set] |= config->tne << bit;
+
+ /* Some banks do not have wake_en ability */
+ if (bank->has_wake_en)
+ wake_en[set] |= config->wake_en << bit;
+ }
+
+ /* Pad configuration registers */
+ reg = bank->pad_base + 16 * bank->gpio_to_pad[gpio];
+
+ /* Add correct func to GPIO pad config */
+ pad_conf0 = config->pad_conf0;
+ if (config->is_gpio)
+ {
+ if (gpio >= bank->gpio_f1_range_start &&
+ gpio <= bank->gpio_f1_range_end)
+ pad_conf0 |= PAD_FUNC1;
+ else
+ pad_conf0 |= PAD_FUNC0;
+ }
+
+#ifdef GPIO_DEBUG
+ printk(BIOS_DEBUG, "Write Pad: Base(%x) - %x %x %x\n",
+ reg, pad_conf0, config->pad_conf1, config->pad_val);
+#endif
+
+ write32(reg + PAD_CONF0_REG, pad_conf0);
+ write32(reg + PAD_CONF1_REG, config->pad_conf1);
+ write32(reg + PAD_VAL_REG, config->pad_val);
+ }
+
+ if (bank->legacy_base != GP_LEGACY_BASE_NONE)
+ for (set = 0; set <= (bank->gpio_count - 1) / 32; ++set) {
+ reg = bank->legacy_base + 0x20 * set;
+
+#ifdef GPIO_DEBUG
+ printk(BIOS_DEBUG,
+ "Write GPIO: Reg(%x) - %x %x %x %x %x\n",
+ reg, use_sel[set], io_sel[set], gp_lvl[set],
+ tpe[set], tne[set]);
+#endif
+
+ outl(use_sel[set], reg + LEGACY_USE_SEL_REG);
+ outl(io_sel[set], reg + LEGACY_IO_SEL_REG);
+ outl(gp_lvl[set], reg + LEGACY_GP_LVL_REG);
+ outl(tpe[set], reg + LEGACY_TPE_REG);
+ outl(tne[set], reg + LEGACY_TNE_REG);
+
+ /* TS registers are WOC */
+ outl(0, reg + LEGACY_TS_REG);
+
+ if (bank->has_wake_en)
+ outl(wake_en[set], reg + LEGACY_WAKE_EN_REG);
+ }
+}
+
+static void setup_gpio_route(const struct soc_gpio_map *sus,
+ const struct soc_gpio_map *core)
+{
+ uint32_t route_reg = 0;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ /* SMI takes precedence and wake_en implies SCI. */
+ if (sus[i].smi) {
+ route_reg |= ROUTE_SMI << (2 * i);
+ } else if (sus[i].sci) {
+ route_reg |= ROUTE_SCI << (2 * i);
+ }
+
+ if (core[i].smi) {
+ route_reg |= ROUTE_SMI << (2 * (i + 8));
+ } else if (core[i].sci) {
+ route_reg |= ROUTE_SCI << (2 * (i + 8));
+ }
+ }
+
+#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
+ southcluster_smm_save_gpio_route(route_reg);
+#endif
+}
+
+static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS],
+ const struct gpio_bank *bank)
+{
+ u32 reg = bank->pad_base + PAD_BASE_DIRQ_OFFSET;
+ u32 val;
+ int i;
+
+ /* Write all four DIRQ registers */
+ for (i=0; i<4; ++i) {
+ val = dirq[i * 4 + 3] << 24 | dirq[i * 4 + 2] << 16 |
+ dirq[i * 4 + 1] << 8 | dirq[i * 4];
+ write32(reg + i * 4, val);
+#ifdef GPIO_DEBUG
+ printk(BIOS_DEBUG, "Write DIRQ reg(%x) - %x\n",
+ reg + i * 4, val);
+#endif
+ }
+}
+
+void setup_soc_gpios(struct soc_gpio_config *config)
+{
+ if (config) {
+ setup_gpios(config->ncore, &gpncore_bank);
+ setup_gpios(config->score, &gpscore_bank);
+ setup_gpios(config->ssus, &gpssus_bank);
+ setup_gpio_route(config->ssus, config->score);
+
+ if (config->core_dirq)
+ setup_dirqs(*config->core_dirq, &gpscore_bank);
+ if (config->sus_dirq)
+ setup_dirqs(*config->sus_dirq, &gpssus_bank);
+ }
+
+}
+
+struct soc_gpio_config* __attribute__((weak)) mainboard_get_gpios(void)
+{
+ printk(BIOS_DEBUG, "Default/empty GPIO config\n");
+ return NULL;
+}
diff --git a/src/soc/intel/fsp_baytrail/iosf.c b/src/soc/intel/fsp_baytrail/iosf.c
new file mode 100644
index 0000000000..f892b20a6b
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/iosf.c
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <baytrail/iosf.h>
+
+#if !defined(__PRE_RAM__)
+#ifndef CONFIG_MMCONF_BASE_ADDRESS
+#error CONFIG_MMCONF_BASE_ADDRESS must be set.
+#endif
+#define IOSF_PCI_BASE (CONFIG_MMCONF_BASE_ADDRESS + (IOSF_PCI_DEV << 12))
+
+static inline void write_iosf_reg(int reg, uint32_t value)
+{
+ write32(IOSF_PCI_BASE + reg, value);
+}
+static inline uint32_t read_iosf_reg(int reg)
+{
+ return read32(IOSF_PCI_BASE + reg);
+}
+#else
+static inline void write_iosf_reg(int reg, uint32_t value)
+{
+ pci_write_config32(IOSF_PCI_DEV, reg, value);
+}
+static inline uint32_t read_iosf_reg(int reg)
+{
+ return pci_read_config32(IOSF_PCI_DEV, reg);
+}
+#endif
+
+/* Common sequences for all the port accesses. */
+static uint32_t iosf_read_port(uint32_t cr, int reg)
+{
+ cr |= IOSF_REG(reg) | IOSF_BYTE_EN;
+ write_iosf_reg(MCRX_REG, IOSF_REG_UPPER(reg));
+ write_iosf_reg(MCR_REG, cr);
+ return read_iosf_reg(MDR_REG);
+}
+
+static void iosf_write_port(uint32_t cr, int reg, uint32_t val)
+{
+ cr |= IOSF_REG(reg) | IOSF_BYTE_EN;
+ write_iosf_reg(MDR_REG, val);
+ write_iosf_reg(MCRX_REG, IOSF_REG_UPPER(reg));
+ write_iosf_reg(MCR_REG, cr);
+}
+
+#define IOSF_READ(port) \
+ IOSF_OPCODE(IOSF_OP_READ_##port) | IOSF_PORT(IOSF_PORT_##port)
+#define IOSF_WRITE(port) \
+ IOSF_OPCODE(IOSF_OP_WRITE_##port) | IOSF_PORT(IOSF_PORT_##port)
+
+uint32_t iosf_bunit_read(int reg)
+{
+ return iosf_read_port(IOSF_READ(BUNIT), reg);
+}
+
+void iosf_bunit_write(int reg, uint32_t val)
+{
+ iosf_write_port(IOSF_WRITE(BUNIT), reg, val);
+}
+
+uint32_t iosf_dunit_read(int reg)
+{
+ return iosf_read_port(IOSF_READ(SYSMEMC), reg);
+}
+
+uint32_t iosf_dunit_ch0_read(int reg)
+{
+ return iosf_dunit_read(reg);
+}
+
+uint32_t iosf_dunit_ch1_read(int reg)
+{
+ uint32_t cr = IOSF_OPCODE(IOSF_OP_READ_SYSMEMC) |
+ IOSF_PORT(IOSF_PORT_DUNIT_CH1);
+ return iosf_read_port(cr, reg);
+}
+
+void iosf_dunit_write(int reg, uint32_t val)
+{
+ iosf_write_port(IOSF_WRITE(SYSMEMC), reg, val);
+}
+
+uint32_t iosf_lpss_read(int reg)
+{
+ return iosf_read_port(IOSF_READ(LPSS), reg);
+}
+
+void iosf_lpss_write(int reg, uint32_t val)
+{
+ return iosf_write_port(IOSF_WRITE(LPSS), reg, val);
+}
diff --git a/src/soc/intel/fsp_baytrail/memmap.c b/src/soc/intel/fsp_baytrail/memmap.c
new file mode 100644
index 0000000000..83858b89a8
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/memmap.c
@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <cbmem.h>
+#include <baytrail/iosf.h>
+#include <baytrail/smm.h>
+
+void *smm_region_start(void)
+{
+ return (void *)(iosf_bunit_read(BUNIT_SMRRL) << 20);
+}
diff --git a/src/soc/intel/fsp_baytrail/microcode/Makefile.inc b/src/soc/intel/fsp_baytrail/microcode/Makefile.inc
new file mode 100644
index 0000000000..012c712174
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/microcode/Makefile.inc
@@ -0,0 +1,25 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+cpu_microcode-$(CONFIG_CPU_MICROCODE_CBFS_GENERATE) += microcode_blob.c
+
+ifneq ($(CONFIG_MICROCODE_INCLUDE_PATH),)
+ifneq ($(wildcard $(shell realpath -q -L "$(top)/$(CONFIG_MICROCODE_INCLUDE_PATH)")),)
+CPPFLAGS_common += -I$(CONFIG_MICROCODE_INCLUDE_PATH)
+endif
+endif
diff --git a/src/soc/intel/fsp_baytrail/microcode/microcode_blob.c b/src/soc/intel/fsp_baytrail/microcode/microcode_blob.c
new file mode 100644
index 0000000000..9df84dd0e0
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/microcode/microcode_blob.c
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+unsigned microcode[] = {
+
+/* Size is 0xCC00 - update in Kconfig when the patch gets updated. */
+#include "M013067331E.h" // M0130673: Baytrail I B2 / B3
+
+};
diff --git a/src/soc/intel/fsp_baytrail/northcluster.c b/src/soc/intel/fsp_baytrail/northcluster.c
new file mode 100644
index 0000000000..19be0f6fb5
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/northcluster.c
@@ -0,0 +1,222 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <cpu/x86/smm.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/lapic.h>
+#include <baytrail/iomap.h>
+#include <baytrail/iosf.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/ramstage.h>
+#include <device/pci.h>
+#include <cbmem.h>
+#include <baytrail/baytrail.h>
+#include <drivers/intel/fsp/fsp_util.h>
+
+
+static const int legacy_hole_base_k = 0xa0000 / 1024;
+static const int legacy_hole_size_k = 384;
+
+/* Host Memory Map:
+ *
+ * +--------------------------+ BMBOUND_HI
+ * | Usable DRAM |
+ * +--------------------------+ 4GiB
+ * | PCI Address Space |
+ * +--------------------------+ BMBOUND
+ * | TPM |
+ * +--------------------------+ IMR2
+ * | TXE |
+ * +--------------------------+ IMR1
+ * | iGD |
+ * +--------------------------+
+ * | GTT |
+ * +--------------------------+ SMMRRH, IRM0
+ * | TSEG |
+ * +--------------------------+ SMMRRL
+ * | FSP |
+ * +--------------------------+ SMMRRL - 2MB
+ * | Usable DRAM |
+ * +--------------------------+ FFFFF
+ * | ROM Area |
+ * +--------------------------+ A0000
+ * | Usable DRAM |
+ * +--------------------------+ 0
+ *
+ * Note that there are really only a few regions that need to enumerated w.r.t.
+ * coreboot's resource model:
+ *
+ * +--------------------------+ BMBOUND_HI
+ * | Cacheable/Usable |
+ * +--------------------------+ 4GiB
+ *
+ * +--------------------------+ BMBOUND
+ * | Uncacheable/Reserved |
+ * +--------------------------+ SMMRRH
+ * | Cacheable/Reserved |
+ * +--------------------------+ SMMRRL - 2MB
+ * | Cacheable/Usable |
+ * +--------------------------+ 0
+ */
+
+/*
+ * Get the top of low memory for use by ACPI
+ */
+uint32_t nc_read_top_of_low_memory(void)
+{
+ uint32_t fsp_mem_base = 0;
+ GetLowMemorySize(&fsp_mem_base);
+
+ return fsp_mem_base;
+}
+
+static int get_pcie_bar(u32 *base, u32 *len)
+{
+ device_t dev;
+ u32 pciexbar_reg;
+
+ *base = 0;
+ *len = 0;
+
+ dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+ if (!dev)
+ return 0;
+
+ pciexbar_reg = iosf_bunit_read(BUNIT_MMCONF_REG);
+
+ if (!(pciexbar_reg & (1 << 0)))
+ return 0;
+
+ *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
+ (1 << 28));
+ *len = 256 * 1024 * 1024; /* 256MB ECAM range */
+ return 1;
+
+}
+
+static int add_fixed_resources(struct device *dev, int index)
+{
+ struct resource *resource;
+ u32 pcie_config_base, pcie_config_size;
+
+
+ if (get_pcie_bar(&pcie_config_base, &pcie_config_size)) {
+ printk(BIOS_DEBUG, "Adding PCIe config bar base=0x%08x "
+ "size=0x%x\n", pcie_config_base, pcie_config_size);
+ resource = new_resource(dev, index++);
+ resource->base = (resource_t) pcie_config_base;
+ resource->size = (resource_t) pcie_config_size;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE |
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+ }
+
+ resource = new_resource(dev, index++); /* Local APIC */
+ resource->base = LAPIC_DEFAULT_BASE;
+ resource->size = 0x00001000;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE |
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+
+ mmio_resource(dev, index++, legacy_hole_base_k, legacy_hole_size_k);
+
+ return index;
+}
+
+static void mc_add_dram_resources(device_t dev)
+{
+ u32 bmbound, bsmmrrl;
+ int index = 0;
+ uint64_t highmem_size = 0;
+ uint32_t fsp_mem_base = 0;
+
+ GetHighMemorySize(&highmem_size);
+ GetLowMemorySize(&fsp_mem_base);
+
+
+ bmbound = iosf_bunit_read(BUNIT_BMBOUND);
+ bsmmrrl = iosf_bunit_read(BUNIT_SMRRL) << 20;
+
+ if (bsmmrrl){
+ printk(BIOS_DEBUG, "UMA, GTT & SMM memory location: 0x%x\n"
+ "UMA, GTT & SMM memory size: %dM\n",
+ bsmmrrl, (bmbound - bsmmrrl) >> 20);
+
+ printk(BIOS_DEBUG, "FSP memory location: 0x%x\nFSP memory size: %dM\n",
+ fsp_mem_base, (bsmmrrl - fsp_mem_base) >> 20);
+
+ if ((bsmmrrl - fsp_mem_base ) != FSP_RESERVE_MEMORY_SIZE)
+ printk(BIOS_WARNING, "Warning: Fsp memory size does not match "
+ "expected memory size (%x).\n", FSP_RESERVE_MEMORY_SIZE);
+ }
+
+ printk(BIOS_INFO, "Available memory below 4GB: 0x%08x (%dM)\n",
+ fsp_mem_base, fsp_mem_base >> 20);
+
+ /* Report the memory regions. */
+ ram_resource(dev, index++, 0, legacy_hole_base_k);
+ ram_resource(dev, index++, legacy_hole_base_k + legacy_hole_size_k,
+ ((fsp_mem_base >> 10) - (legacy_hole_base_k + legacy_hole_size_k)));
+
+ /* Mark SMM & FSP regions reserved */
+ mmio_resource(dev, index++, fsp_mem_base >> 10,
+ (bmbound - fsp_mem_base) >> 10);
+
+ if (highmem_size) {
+ ram_resource(dev, index++, 0x100000000 >> 10, highmem_size >> 10 );
+ }
+ printk(BIOS_INFO, "Available memory above 4GB: %lluM\n",
+ highmem_size >> 20);
+
+ index = add_fixed_resources(dev, index);
+}
+
+static void nc_read_resources(device_t dev)
+{
+ /* Call the normal read_resources */
+ pci_dev_read_resources(dev);
+
+
+ /* Calculate and add DRAM resources. */
+ mc_add_dram_resources(dev);
+}
+
+static void nc_enable(device_t dev)
+{
+ print_fsp_info();
+}
+
+static struct device_operations nc_ops = {
+ .read_resources = nc_read_resources,
+ .set_resources = NULL,
+ .enable_resources = NULL,
+ .init = NULL,
+ .enable = &nc_enable,
+ .scan_bus = NULL,
+ .ops_pci = &soc_pci_ops,
+};
+
+static const struct pci_driver nc_driver __pci_driver = {
+ .ops = &nc_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = SOC_DEVID,
+};
+
diff --git a/src/soc/intel/fsp_baytrail/nvm.c b/src/soc/intel/fsp_baytrail/nvm.c
new file mode 100644
index 0000000000..dab87ae69f
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/nvm.c
@@ -0,0 +1,88 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <stddef.h>
+#include <console/console.h>
+#include <string.h>
+#include <spi-generic.h>
+#include <spi_flash.h>
+#include <baytrail/nvm.h>
+
+/* This module assumes the flash is memory mapped just below 4GiB in the
+ * address space for reading. Also this module assumes an area it erased
+ * when all bytes read as all 0xff's. */
+
+static struct spi_flash *flash;
+
+static int nvm_init(void)
+{
+ if (flash != NULL)
+ return 0;
+
+ spi_init();
+ flash = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+ if (!flash) {
+ printk(BIOS_DEBUG, "Could not find SPI device\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Convert memory mapped pointer to flash offset. */
+static inline uint32_t to_flash_offset(void *p)
+{
+#ifndef CONFIG_ROM_SIZE
+#error CONFIG_ROM_SIZE must be set.
+#endif
+ return CONFIG_ROM_SIZE + (uintptr_t)p;
+}
+
+int nvm_is_erased(const void *start, size_t size)
+{
+ const uint8_t *cur = start;
+ const uint8_t erased_value = 0xff;
+
+ while (size > 0) {
+ if (*cur != erased_value)
+ return 0;
+ cur++;
+ size--;
+ }
+ return 1;
+}
+
+int nvm_erase(void *start, size_t size)
+{
+ if (nvm_init() < 0)
+ return -1;
+ flash->erase(flash, to_flash_offset(start), size);
+ return 0;
+}
+
+/* Write data to NVM. Returns 0 on success < 0 on error. */
+int nvm_write(void *start, const void *data, size_t size)
+{
+ if (nvm_init() < 0)
+ return -1;
+ flash->write(flash, to_flash_offset(start), size, data);
+ return 0;
+}
diff --git a/src/soc/intel/fsp_baytrail/placeholders.c b/src/soc/intel/fsp_baytrail/placeholders.c
new file mode 100644
index 0000000000..c9a9da4e8b
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/placeholders.c
@@ -0,0 +1,15 @@
+
+#include <arch/acpi.h>
+#include <cpu/cpu.h>
+#include <device/pci_rom.h>
+#include <baytrail/acpi.h>
+
+
+void acpi_create_serialio_ssdt(acpi_header_t *ssdt) {}
+
+#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
+void smm_init(void) {}
+#endif
+
+/* Rmodules don't like weak symbols. */
+u32 map_oprom_vendev(u32 vendev) { return vendev; }
diff --git a/src/soc/intel/fsp_baytrail/pmutil.c b/src/soc/intel/fsp_baytrail/pmutil.c
new file mode 100644
index 0000000000..aee37261be
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/pmutil.c
@@ -0,0 +1,364 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <console/console.h>
+
+#include <baytrail/iomap.h>
+#include <baytrail/lpc.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/pmc.h>
+
+#if defined(__SMM__)
+
+static const device_t pcu_dev = PCI_DEV(0, PCU_DEV, 0);
+
+static inline device_t get_pcu_dev(void)
+{
+ return pcu_dev;
+}
+
+#else /* !__SMM__ */
+#include <device/device.h>
+#include <device/pci.h>
+
+static device_t pcu_dev;
+static device_t get_pcu_dev(void)
+{
+ if (pcu_dev == NULL)
+ pcu_dev = dev_find_slot(0, PCI_DEVFN(PCU_DEV, 0));
+ return pcu_dev;
+}
+#endif
+
+uint16_t get_pmbase(void)
+{
+ return pci_read_config16(get_pcu_dev(), ABASE) & 0xfff8;
+}
+
+static void print_num_status_bits(int num_bits, uint32_t status,
+ const char *bit_names[])
+{
+ int i;
+
+ if (!status)
+ return;
+
+ for (i = num_bits - 1; i >= 0; i--) {
+ if (status & (1 << i)) {
+ if (bit_names[i])
+ printk(BIOS_DEBUG, "%s ", bit_names[i]);
+ else
+ printk(BIOS_DEBUG, "BIT%d ", i);
+ }
+ }
+}
+
+static void print_status_bits(uint32_t status, const char *bit_names[])
+{
+ print_num_status_bits(32, status, bit_names);
+}
+
+static uint32_t print_smi_status(uint32_t smi_sts)
+{
+ static const char *smi_sts_bits[] = {
+ [2] = "BIOS",
+ [4] = "SLP_SMI",
+ [5] = "APM",
+ [6] = "SWSMI_TMR",
+ [8] = "PM1",
+ [9] = "GPE0",
+ [12] = "DEVMON",
+ [13] = "TCO",
+ [14] = "PERIODIC",
+ [15] = "ILB",
+ [16] = "SMBUS_SMI",
+ [17] = "LEGACY_USB2",
+ [18] = "INTEL_USB2",
+ [20] = "PCI_EXP_SMI",
+ [26] = "SPI",
+ [28] = "PUNIT",
+ [29] = "GUNIT",
+ };
+
+ if (!smi_sts)
+ return 0;
+
+ printk(BIOS_DEBUG, "SMI_STS: ");
+ print_status_bits(smi_sts, smi_sts_bits);
+ printk(BIOS_DEBUG, "\n");
+
+ return smi_sts;
+}
+
+static uint32_t reset_smi_status(void)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t smi_sts = inl(pmbase + SMI_STS);
+ outl(smi_sts, pmbase + SMI_STS);
+ return smi_sts;
+}
+
+uint32_t clear_smi_status(void)
+{
+ return print_smi_status(reset_smi_status());
+}
+
+void enable_smi(uint32_t mask)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t smi_en = inl(pmbase + SMI_EN);
+ smi_en |= mask;
+ outl(smi_en, pmbase + SMI_EN);
+}
+
+void disable_smi(uint32_t mask)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t smi_en = inl(pmbase + SMI_EN);
+ smi_en &= ~mask;
+ outl(smi_en, pmbase + SMI_EN);
+}
+
+void enable_pm1_control(uint32_t mask)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t pm1_cnt = inl(pmbase + PM1_CNT);
+ pm1_cnt |= mask;
+ outl(pm1_cnt, pmbase + PM1_CNT);
+}
+
+void disable_pm1_control(uint32_t mask)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t pm1_cnt = inl(pmbase + PM1_CNT);
+ pm1_cnt &= ~mask;
+ outl(pm1_cnt, pmbase + PM1_CNT);
+}
+
+static uint16_t reset_pm1_status(void)
+{
+ uint16_t pmbase = get_pmbase();
+ uint16_t pm1_sts = inw(pmbase + PM1_STS);
+ outw(pm1_sts, pmbase + PM1_STS);
+ return pm1_sts;
+}
+
+static uint16_t print_pm1_status(uint16_t pm1_sts)
+{
+ static const char *pm1_sts_bits[] = {
+ [0] = "TMROF",
+ [5] = "GBL",
+ [8] = "PWRBTN",
+ [10] = "RTC",
+ [11] = "PRBTNOR",
+ [13] = "USB",
+ [14] = "PCIEXPWAK",
+ [15] = "WAK",
+ };
+
+ if (!pm1_sts)
+ return 0;
+
+ printk(BIOS_SPEW, "PM1_STS: ");
+ print_status_bits(pm1_sts, pm1_sts_bits);
+ printk(BIOS_SPEW, "\n");
+
+ return pm1_sts;
+}
+
+uint16_t clear_pm1_status(void)
+{
+ return print_pm1_status(reset_pm1_status());
+}
+
+void enable_pm1(uint16_t events)
+{
+ outw(events, get_pmbase() + PM1_EN);
+}
+
+static uint32_t print_tco_status(uint32_t tco_sts)
+{
+ static const char *tco_sts_bits[] = {
+ [3] = "TIMEOUT",
+ [17] = "SECOND_TO",
+ };
+
+ if (!tco_sts)
+ return 0;
+
+ printk(BIOS_DEBUG, "TCO_STS: ");
+ print_status_bits(tco_sts, tco_sts_bits);
+ printk(BIOS_DEBUG, "\n");
+
+ return tco_sts;
+}
+
+static uint32_t reset_tco_status(void)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t tco_sts = inl(pmbase + TCO_STS);
+ uint32_t tco_en = inl(pmbase + TCO1_CNT);
+
+ outl(tco_sts, pmbase + TCO_STS);
+ return tco_sts & tco_en;
+}
+
+uint32_t clear_tco_status(void)
+{
+ return print_tco_status(reset_tco_status());
+}
+
+void enable_gpe(uint32_t mask)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t gpe0_en = inl(pmbase + GPE0_EN);
+ gpe0_en |= mask;
+ outl(gpe0_en, pmbase + GPE0_EN);
+}
+
+void disable_gpe(uint32_t mask)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t gpe0_en = inl(pmbase + GPE0_EN);
+ gpe0_en &= ~mask;
+ outl(gpe0_en, pmbase + GPE0_EN);
+}
+
+void disable_all_gpe(void)
+{
+ disable_gpe(~0);
+}
+
+
+static uint32_t reset_gpe_status(void)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t gpe_sts = inl(pmbase + GPE0_STS);
+ outl(gpe_sts, pmbase + GPE0_STS);
+ return gpe_sts;
+}
+
+static uint32_t print_gpe_sts(uint32_t gpe_sts)
+{
+ static const char *gpe_sts_bits[] = {
+ [1] = "HOTPLUG",
+ [2] = "SWGPE",
+ [3] = "PCIE_WAKE0",
+ [4] = "PUNIT",
+ [5] = "GUNIT",
+ [6] = "PCIE_WAKE1",
+ [7] = "PCIE_WAKE2",
+ [8] = "PCIE_WAKE3",
+ [9] = "PCI_EXP",
+ [10] = "BATLOW",
+ [13] = "PME_B0",
+ [16] = "SUS_GPIO_0",
+ [17] = "SUS_GPIO_1",
+ [18] = "SUS_GPIO_2",
+ [19] = "SUS_GPIO_3",
+ [20] = "SUS_GPIO_4",
+ [21] = "SUS_GPIO_5",
+ [22] = "SUS_GPIO_6",
+ [23] = "SUS_GPIO_7",
+ [24] = "CORE_GPIO_0",
+ [25] = "CORE_GPIO_1",
+ [26] = "CORE_GPIO_2",
+ [27] = "CORE_GPIO_3",
+ [28] = "CORE_GPIO_4",
+ [29] = "CORE_GPIO_5",
+ [30] = "CORE_GPIO_6",
+ [31] = "CORE_GPIO_7",
+ };
+
+ if (!gpe_sts)
+ return gpe_sts;
+
+ printk(BIOS_DEBUG, "GPE0a_STS: ");
+ print_status_bits(gpe_sts, gpe_sts_bits);
+ printk(BIOS_DEBUG, "\n");
+
+ return gpe_sts;
+}
+
+uint32_t clear_gpe_status(void)
+{
+ return print_gpe_sts(reset_gpe_status());
+}
+
+static uint32_t reset_alt_status(void)
+{
+ uint16_t pmbase = get_pmbase();
+ uint32_t alt_gpio_smi = inl(pmbase + ALT_GPIO_SMI);
+ outl(alt_gpio_smi, pmbase + ALT_GPIO_SMI);
+ return alt_gpio_smi;
+}
+
+static uint32_t print_alt_sts(uint32_t alt_gpio_smi)
+{
+ uint32_t alt_gpio_sts;
+ static const char *alt_gpio_smi_sts_bits[] = {
+ [0] = "SUS_GPIO_0",
+ [1] = "SUS_GPIO_1",
+ [2] = "SUS_GPIO_2",
+ [3] = "SUS_GPIO_3",
+ [4] = "SUS_GPIO_4",
+ [5] = "SUS_GPIO_5",
+ [6] = "SUS_GPIO_6",
+ [7] = "SUS_GPIO_7",
+ [8] = "CORE_GPIO_0",
+ [9] = "CORE_GPIO_1",
+ [10] = "CORE_GPIO_2",
+ [11] = "CORE_GPIO_3",
+ [12] = "CORE_GPIO_4",
+ [13] = "CORE_GPIO_5",
+ [14] = "CORE_GPIO_6",
+ [15] = "CORE_GPIO_7",
+ };
+
+ /* Status bits are in the upper 16 bits. */
+ alt_gpio_sts = alt_gpio_smi >> 16;
+ if (!alt_gpio_sts)
+ return alt_gpio_smi;
+
+ printk(BIOS_DEBUG, "ALT_GPIO_SMI: ");
+ print_num_status_bits(16, alt_gpio_sts, alt_gpio_smi_sts_bits);
+ printk(BIOS_DEBUG, "\n");
+
+ return alt_gpio_smi;
+}
+
+uint32_t clear_alt_status(void)
+{
+ return print_alt_sts(reset_alt_status());
+}
+
+void clear_pmc_status(void)
+{
+ uint32_t prsts;
+ uint32_t gen_pmcon1;
+
+ prsts = read32(PMC_BASE_ADDRESS + PRSTS);
+ gen_pmcon1 = read32(PMC_BASE_ADDRESS + GEN_PMCON1);
+
+ /* Clear the status bits. The RPS field is cleared on a 0 write. */
+ write32(PMC_BASE_ADDRESS + GEN_PMCON1, gen_pmcon1 & ~RPS);
+ write32(PMC_BASE_ADDRESS + PRSTS, prsts);
+}
diff --git a/src/soc/intel/fsp_baytrail/raminit.c b/src/soc/intel/fsp_baytrail/raminit.c
new file mode 100644
index 0000000000..9170f483ca
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/raminit.c
@@ -0,0 +1,48 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Google Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <cbmem.h>
+#include <device/device.h>
+#include <baytrail/baytrail.h>
+#include <baytrail/iosf.h>
+#include <cpu/x86/msr.h>
+#include <drivers/intel/fsp/fsp_util.h>
+
+unsigned long get_top_of_ram(void)
+{
+ /*
+ * Calculate the top of usable (low) DRAM.
+ * The FSP's reserved memory sits just below the SMM region,
+ * allowing calculation of the top of usable memory.
+ *
+ * The entire memory map is shown in northcluster.c
+ */
+ u32 tom = iosf_bunit_read(BUNIT_BMBOUND);
+ u32 bsmmrrl = iosf_bunit_read(BUNIT_SMRRL) << 20;
+ if (bsmmrrl) {
+ tom = bsmmrrl;
+ }
+ tom -= FSP_RESERVE_MEMORY_SIZE;
+
+ return (unsigned long) tom;
+}
+
diff --git a/src/soc/intel/fsp_baytrail/ramstage.c b/src/soc/intel/fsp_baytrail/ramstage.c
new file mode 100644
index 0000000000..e23170136e
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/ramstage.c
@@ -0,0 +1,138 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <cpu/intel/microcode.h>
+#include <cpu/x86/cr.h>
+#include <cpu/x86/msr.h>
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <device/pci_ops.h>
+#include <stdlib.h>
+
+#include <baytrail/gpio.h>
+#include <baytrail/lpc.h>
+#include <baytrail/msr.h>
+#include <baytrail/pattrs.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/ramstage.h>
+
+/* Global PATTRS */
+DEFINE_PATTRS;
+
+#define SHOW_PATTRS 1
+
+static void detect_num_cpus(struct pattrs *attrs)
+{
+ int ecx = 0;
+
+ while (1) {
+ struct cpuid_result leaf_b;
+
+ leaf_b = cpuid_ext(0xb, ecx);
+
+ /* Bay Trail doesn't have hyperthreading so just determine the
+ * number of cores by from level type (ecx[15:8] == * 2). */
+ if ((leaf_b.ecx & 0xff00) == 0x0200) {
+ attrs->num_cpus = leaf_b.ebx & 0xffff;
+ break;
+ }
+ ecx++;
+ }
+}
+
+static inline void fill_in_msr(msr_t *msr, int idx)
+{
+ *msr = rdmsr(idx);
+ if (SHOW_PATTRS) {
+ printk(BIOS_DEBUG, "msr(%x) = %08x%08x\n",
+ idx, msr->hi, msr->lo);
+ }
+}
+
+static const char *stepping_str[] = {
+ "A0", "A1", "B0", "B1", "B2", "B3"
+};
+
+static void fill_in_pattrs(void)
+{
+ device_t dev;
+ msr_t msr;
+ struct pattrs *attrs = (struct pattrs *)pattrs_get();
+
+ attrs->cpuid = cpuid_eax(1);
+ dev = dev_find_slot(0, PCI_DEVFN(LPC_DEV, LPC_FUNC));
+ attrs->revid = pci_read_config8(dev, REVID);
+ /* The revision to stepping IDs have two values per metal stepping. */
+ if (attrs->revid >= RID_B_STEPPING_START) {
+ attrs->stepping = (attrs->revid - RID_B_STEPPING_START) / 2;
+ attrs->stepping += STEP_B0;
+ } else {
+ attrs->stepping = (attrs->revid - RID_A_STEPPING_START) / 2;
+ attrs->stepping += STEP_A0;
+ }
+
+ attrs->address_bits = cpuid_eax(0x80000008) & 0xff;
+ detect_num_cpus(attrs);
+
+ if (SHOW_PATTRS) {
+ printk(BIOS_DEBUG,
+ "CPUID: %08x\nCores: %d\nRevision ID: %02x\nStepping: %s\n",
+ attrs->cpuid, attrs->num_cpus, attrs->revid,
+ (attrs->stepping >= ARRAY_SIZE(stepping_str)) ? "??" :
+ stepping_str[attrs->stepping]);
+ }
+
+ fill_in_msr(&attrs->platform_id, MSR_IA32_PLATFORM_ID);
+ fill_in_msr(&attrs->platform_info, MSR_PLATFORM_INFO);
+
+ /* Set IA core speed ratio and voltages */
+ msr = rdmsr(MSR_IACORE_RATIOS);
+ attrs->iacore_ratios[IACORE_MIN] = msr.lo & 0x7f;
+ attrs->iacore_ratios[IACORE_LFM] = (msr.lo >> 8) & 0x7f;
+ attrs->iacore_ratios[IACORE_MAX] = (msr.lo >> 16) & 0x7f;
+ msr = rdmsr(MSR_IACORE_TURBO_RATIOS);
+ attrs->iacore_ratios[IACORE_TURBO] = (msr.lo & 0xff); /* 1 core max */
+
+ msr = rdmsr(MSR_IACORE_VIDS);
+ attrs->iacore_vids[IACORE_MIN] = msr.lo & 0x7f;
+ attrs->iacore_vids[IACORE_LFM] = (msr.lo >> 8) & 0x7f;
+ attrs->iacore_vids[IACORE_MAX] = (msr.lo >> 16) & 0x7f;
+ msr = rdmsr(MSR_IACORE_TURBO_VIDS);
+ attrs->iacore_vids[IACORE_TURBO] = (msr.lo & 0xff); /* 1 core max */
+
+ /* Set bus clock speed */
+ attrs->bclk_khz = bus_freq_khz();
+}
+
+
+void baytrail_init_pre_device(void)
+{
+ struct soc_gpio_config *config;
+
+ fill_in_pattrs();
+
+ /* Allow for SSE instructions to be executed. */
+ write_cr4(read_cr4() | CR4_OSFXSR | CR4_OSXMMEXCPT);
+
+ /* Get GPIO initial states from mainboard */
+ config = mainboard_get_gpios();
+ setup_soc_gpios(config);
+}
diff --git a/src/soc/intel/fsp_baytrail/reset.c b/src/soc/intel/fsp_baytrail/reset.c
new file mode 100644
index 0000000000..a421ec9018
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/reset.c
@@ -0,0 +1,47 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <baytrail/pmc.h>
+#include <baytrail/reset.h>
+
+void cold_reset(void)
+{
+ /* S0->S5->S0 trip. */
+ outb(RST_CPU | SYS_RST | FULL_RST, RST_CNT);
+}
+
+void warm_reset(void)
+{
+ /* PMC_PLTRST# asserted. */
+ outb(RST_CPU | SYS_RST, RST_CNT);
+}
+
+void soft_reset(void)
+{
+ /* Sends INIT# to CPU */
+ outb(RST_CPU, RST_CNT);
+}
+
+void hard_reset(void)
+{
+ /* Don't power cycle on hard_reset(). It's not really clear what the
+ * semantics should be for the meaning of hard_reset(). */
+ warm_reset();
+}
diff --git a/src/soc/intel/fsp_baytrail/romstage/Makefile.inc b/src/soc/intel/fsp_baytrail/romstage/Makefile.inc
new file mode 100644
index 0000000000..ff7762eda7
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/romstage/Makefile.inc
@@ -0,0 +1,26 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2013 Google Inc.
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+romstage-y += romstage.c
+romstage-y += pmc.c
+romstage-y += report_platform.c
+romstage-$(CONFIG_ENABLE_BUILTIN_COM1) += uart.c
+
+$(obj)/soc/intel/fsp_baytrail/romstage/romstage.romstage.o : $(obj)/build.h \ No newline at end of file
diff --git a/src/soc/intel/fsp_baytrail/romstage/pmc.c b/src/soc/intel/fsp_baytrail/romstage/pmc.c
new file mode 100644
index 0000000000..678f951fe5
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/romstage/pmc.c
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stddef.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <baytrail/iomap.h>
+#include <baytrail/iosf.h>
+#include <baytrail/lpc.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/pmc.h>
+#include <baytrail/romstage.h>
+#include "../chip.h"
+
+void tco_disable(void)
+{
+ uint32_t reg;
+
+ reg = inl(ACPI_BASE_ADDRESS + TCO1_CNT);
+ reg |= TCO_TMR_HALT;
+ outl(reg, ACPI_BASE_ADDRESS + TCO1_CNT);
+}
+
diff --git a/src/soc/intel/fsp_baytrail/romstage/report_platform.c b/src/soc/intel/fsp_baytrail/romstage/report_platform.c
new file mode 100644
index 0000000000..37e40ba07c
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/romstage/report_platform.c
@@ -0,0 +1,88 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <baytrail/iosf.h>
+#include <baytrail/romstage.h>
+#include <cpu/x86/msr.h>
+#include <baytrail/msr.h>
+#include <cpu/x86/name.h>
+
+static void print_dram_info(void)
+{
+ const int mrc_ver_reg = 0xf0;
+ const uint32_t soc_dev = PCI_DEV(0, SOC_DEV, SOC_FUNC);
+ uint32_t reg;
+ int num_channels;
+ int speed;
+ uint32_t ch0;
+ uint32_t ch1;
+
+ reg = pci_read_config32(soc_dev, mrc_ver_reg);
+
+ printk(BIOS_INFO, "MRC v%d.%02d\n", (reg >> 8) & 0xff, reg & 0xff);
+
+ /* Number of channels enabled and DDR3 type. Determine number of
+ * channels by the keying of the rank enable bits [3:0]. * */
+ ch0 = iosf_dunit_ch0_read(DRP);
+ ch1 = iosf_dunit_ch1_read(DRP);
+ num_channels = 0;
+ if (ch0 & DRP_RANK_MASK)
+ num_channels++;
+ if (ch1 & DRP_RANK_MASK)
+ num_channels++;
+
+ printk(BIOS_INFO, "%d channels of %sDDR3 @ ", num_channels,
+ (reg & (1 << 22)) ? "LP" : "");
+
+ /* DRAM frequency -- all channels run at same frequency. */
+ reg = iosf_dunit_read(DTR0);
+ switch (reg & 0x3) {
+ case 0:
+ speed = 800; break;
+ case 1:
+ speed = 1066; break;
+ case 2:
+ speed = 1333; break;
+ case 3:
+ speed = 1600; break;
+ }
+ printk(BIOS_INFO, "%dMHz\n", speed);
+}
+
+#define VARIANT_ID_BYTE 18
+#define VARIANT_ID_MASK 7
+void report_platform_info(void)
+{
+ const char *baytrail_variants[4] = {
+ "Bay Trail-I (ISG/embedded)",
+ "Bay Trail-T (Tablet)",
+ "Bay Trail-D (Desktop)",
+ "Bay Trail-M (Mobile)",
+ };
+ msr_t platform_id = rdmsr(MSR_IA32_PLATFORM_ID);
+ uint8_t variant = (platform_id.hi >> VARIANT_ID_BYTE) & VARIANT_ID_MASK;
+
+ printk(BIOS_INFO, "Baytrail Chip Variant: %s\n", variant < 4 ?
+ baytrail_variants[variant] : "Unknown");
+ print_dram_info();
+
+}
diff --git a/src/soc/intel/fsp_baytrail/romstage/romstage.c b/src/soc/intel/fsp_baytrail/romstage/romstage.c
new file mode 100644
index 0000000000..a63156ff11
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/romstage/romstage.c
@@ -0,0 +1,232 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stddef.h>
+#include <arch/cpu.h>
+#include <lib.h>
+#include <arch/io.h>
+#include <arch/cbfs.h>
+#include <arch/stages.h>
+#include <console/console.h>
+#include <cbmem.h>
+#include <cpu/x86/mtrr.h>
+#include <romstage_handoff.h>
+#include <timestamp.h>
+#include <baytrail/gpio.h>
+#include <baytrail/iomap.h>
+#include <baytrail/lpc.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/romstage.h>
+#include <baytrail/acpi.h>
+#include <baytrail/baytrail.h>
+#include <drivers/intel/fsp/fsp_util.h>
+#include <baytrail/pmc.h>
+#include <baytrail/spi.h>
+#include <build.h>
+#include <pc80/mc146818rtc.h>
+#include <device/pci_def.h>
+#include <console/cbmem_console.h>
+
+static void program_base_addresses(void)
+{
+ uint32_t reg;
+
+ /* Memory Mapped IO registers. */
+ reg = PMC_BASE_ADDRESS | SET_BAR_ENABLE;
+ pci_write_config32(LPC_BDF, PBASE, reg);
+ reg = IO_BASE_ADDRESS | SET_BAR_ENABLE;
+ pci_write_config32(LPC_BDF, IOBASE, reg);
+ reg = ILB_BASE_ADDRESS | SET_BAR_ENABLE;
+ pci_write_config32(LPC_BDF, IBASE, reg);
+ reg = SPI_BASE_ADDRESS | SET_BAR_ENABLE;
+ pci_write_config32(LPC_BDF, SBASE, reg);
+ reg = MPHY_BASE_ADDRESS | SET_BAR_ENABLE;
+ pci_write_config32(LPC_BDF, MPBASE, reg);
+ reg = PUNIT_BASE_ADDRESS | SET_BAR_ENABLE;
+ pci_write_config32(LPC_BDF, PUBASE, reg);
+ reg = RCBA_BASE_ADDRESS | RCBA_ENABLE;
+ pci_write_config32(LPC_BDF, RCBA, reg);
+
+ /* IO Port Registers. */
+ reg = ACPI_BASE_ADDRESS | SET_BAR_ENABLE;
+ pci_write_config32(LPC_BDF, ABASE, reg);
+ reg = GPIO_BASE_ADDRESS | SET_BAR_ENABLE;
+ pci_write_config32(LPC_BDF, GBASE, reg);
+}
+
+static void spi_init(void)
+{
+ const uint32_t scs = SPI_BASE_ADDRESS + SCS;
+ const uint32_t bcr = SPI_BASE_ADDRESS + BCR;
+ uint32_t reg;
+
+ /* Disable generating SMI when setting WPD bit. */
+ write32(scs, read32(scs) & ~SMIWPEN);
+ /*
+ * Enable caching and prefetching in the SPI controller. Disable
+ * the SMM-only BIOS write and set WPD bit.
+ */
+ reg = (read32(bcr) & ~SRC_MASK) | SRC_CACHE_PREFETCH | BCR_WPD;
+ reg &= ~EISS;
+ write32(bcr, reg);
+}
+
+static void baytrail_rtc_init(void)
+{
+ uint32_t pbase = pci_read_config32(LPC_BDF, PBASE) & 0xfffffff0;
+ uint32_t gen_pmcon1 = read32(pbase + GEN_PMCON1);
+ int rtc_failed = !!(gen_pmcon1 & RPS);
+
+ if (rtc_failed) {
+ printk(BIOS_DEBUG,
+ "RTC Failure detected. Resetting Date to %x/%x/%x%x\n",
+ COREBOOT_BUILD_MONTH_BCD,
+ COREBOOT_BUILD_DAY_BCD,
+ 0x20,
+ COREBOOT_BUILD_YEAR_BCD);
+
+ write32(DEFAULT_PBASE + GEN_PMCON1, gen_pmcon1 & ~RPS);
+ }
+
+ rtc_init(rtc_failed);
+}
+
+/* Entry from cache-as-ram.inc. */
+void * asmlinkage main(FSP_INFO_HEADER *fsp_info_header)
+{
+ const unsigned long func_dis = PMC_BASE_ADDRESS + FUNC_DIS;
+ const unsigned long func_dis2 = PMC_BASE_ADDRESS + FUNC_DIS2;
+ uint32_t fd_mask = 0;
+ uint32_t fd2_mask = 0;
+
+ post_code(0x40);
+
+ program_base_addresses();
+
+ post_code(0x41);
+ tco_disable();
+
+ post_code(0x42);
+ byt_config_com1_and_enable();
+
+ post_code(0x43);
+ console_init();
+
+ spi_init();
+ baytrail_rtc_init();
+
+ /* Call into mainboard. */
+ early_mainboard_romstage_entry();
+
+ set_max_freq();
+
+ post_code(0x44);
+
+ /* Program any required function disables */
+ get_func_disables(&fd_mask, &fd2_mask);
+
+ if (fd_mask != 0) {
+ write32(func_dis, read32(func_dis) | fd_mask);
+ /* Ensure posted write hits. */
+ read32(func_dis);
+ }
+
+ if (fd2_mask != 0) {
+ write32(func_dis2, read32(func_dis2) | fd2_mask);
+ /* Ensure posted write hits. */
+ read32(func_dis2);
+ }
+
+ post_code(0x47);
+
+ /*
+ * Call early init to initialize memory and chipset. This function returns
+ * to the romstage_main_continue function with a pointer to the HOB
+ * structure.
+ */
+ post_code(0x48);
+ printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n");
+ fsp_early_init(fsp_info_header);
+ die("Uh Oh! fsp_early_init should not return here.\n");
+}
+
+/*******************************************************************************
+ * The FSP early_init function returns to this function.
+ * Memory is setup and the stack is set by the FSP.
+ */
+void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr) {
+ int cbmem_was_initted;
+ void *cbmem_hob_ptr;
+
+#if IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS)
+ tsc_t after_initram_time = rdtsc();
+ tsc_t base_time;
+ base_time.hi = 0;
+ base_time.lo = 0;
+#endif
+
+ post_code(0x4a);
+ printk(BIOS_DEBUG, "%s status: %x hob_list_ptr: %x\n",
+ __func__, (u32) status, (u32) hob_list_ptr);
+
+#if IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE)
+ /* FSP reconfigures USB, so reinit it to have debug */
+ usbdebug_init();
+#endif /* IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE) */
+
+ printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status);
+
+ report_platform_info();
+
+#if IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS)
+ after_initram_time = rdtsc();
+#endif
+ post_code(0x4b);
+
+ late_mainboard_romstage_entry();
+ post_code(0x4c);
+
+ quick_ram_check();
+ post_code(0x4d);
+
+ cbmem_was_initted = !cbmem_recovery(0);
+
+ /* Save the HOB pointer in CBMEM to be used in ramstage*/
+ cbmem_hob_ptr = cbmem_add (CBMEM_ID_HOB_POINTER, sizeof(*hob_list_ptr));
+ *(u32*)cbmem_hob_ptr = (u32)hob_list_ptr;
+ post_code(0x4e);
+
+#if IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS)
+ timestamp_init(base_time);
+ timestamp_reinit();
+ timestamp_add(TS_AFTER_INITRAM, after_initram_time);
+ timestamp_add_now(TS_END_ROMSTAGE);
+#endif
+
+#if IS_ENABLED(CONFIG_CONSOLE_CBMEM)
+ printk(BIOS_DEBUG, "cbmemc_reinit\n");
+ cbmemc_reinit();
+#endif
+ post_code(0x4f);
+
+ /* Load the ramstage. */
+ copy_and_run();
+ while (1);
+}
diff --git a/src/soc/intel/fsp_baytrail/romstage/uart.c b/src/soc/intel/fsp_baytrail/romstage/uart.c
new file mode 100644
index 0000000000..971067f143
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/romstage/uart.c
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <baytrail/gpio.h>
+#include <baytrail/iomap.h>
+#include <baytrail/lpc.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/romstage.h>
+
+void byt_config_com1_and_enable(void)
+{
+ uint32_t reg;
+
+ /* Enable the legacy UART hardware. */
+ reg = 1;
+ pci_write_config32(PCI_DEV(0, LPC_DEV, 0), UART_CONT, reg);
+
+ /* Set up the pads to select the UART function */
+ score_select_func(UART_RXD_PAD, 1);
+ score_select_func(UART_TXD_PAD, 1);
+}
diff --git a/src/soc/intel/fsp_baytrail/smihandler.c b/src/soc/intel/fsp_baytrail/smihandler.c
new file mode 100644
index 0000000000..2225964268
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/smihandler.c
@@ -0,0 +1,406 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <arch/hlt.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include <device/pci_def.h>
+#include <elog.h>
+
+#include <baytrail/pci_devs.h>
+#include <baytrail/pmc.h>
+#include <baytrail/nvs.h>
+
+/* GNVS needs to be set by coreboot initiating a software SMI. */
+static global_nvs_t *gnvs;
+static int smm_initialized;
+
+int southbridge_io_trap_handler(int smif)
+{
+ switch (smif) {
+ case 0x32:
+ printk(BIOS_DEBUG, "OS Init\n");
+ /* gnvs->smif:
+ * On success, the IO Trap Handler returns 0
+ * On failure, the IO Trap Handler returns a value != 0
+ */
+ gnvs->smif = 0;
+ return 1; /* IO trap handled */
+ }
+
+ /* Not handled */
+ return 0;
+}
+
+void southbridge_smi_set_eos(void)
+{
+ enable_smi(EOS);
+}
+
+global_nvs_t *smm_get_gnvs(void)
+{
+ return gnvs;
+}
+
+static void busmaster_disable_on_bus(int bus)
+{
+ int slot, func;
+ unsigned int val;
+ unsigned char hdr;
+
+ for (slot = 0; slot < 0x20; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 reg32;
+ device_t dev = PCI_DEV(bus, slot, func);
+
+ val = pci_read_config32(dev, PCI_VENDOR_ID);
+
+ if (val == 0xffffffff || val == 0x00000000 ||
+ val == 0x0000ffff || val == 0xffff0000)
+ continue;
+
+ /* Disable Bus Mastering for this one device */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 &= ~PCI_COMMAND_MASTER;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* If this is a bridge, then follow it. */
+ hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
+ hdr &= 0x7f;
+ if (hdr == PCI_HEADER_TYPE_BRIDGE ||
+ hdr == PCI_HEADER_TYPE_CARDBUS) {
+ unsigned int buses;
+ buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
+ busmaster_disable_on_bus((buses >> 8) & 0xff);
+ }
+ }
+ }
+}
+
+static void southbridge_smi_sleep(void)
+{
+ uint32_t reg32;
+ uint8_t slp_typ;
+ uint16_t pmbase = get_pmbase();
+
+ /* First, disable further SMIs */
+ disable_smi(SLP_SMI_EN);
+
+ /* Figure out SLP_TYP */
+ reg32 = inl(pmbase + PM1_CNT);
+ printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
+ slp_typ = (reg32 >> 10) & 7;
+
+ /* Do any mainboard sleep handling */
+ mainboard_smi_sleep(slp_typ-2);
+
+#if IS_ENABLED(CONFIG_ELOG_GSMI)
+ /* Log S3, S4, and S5 entry */
+ if (slp_typ >= 5)
+ elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2);
+#endif
+
+ /* Next, do the deed.
+ */
+
+ switch (slp_typ) {
+ case SLP_TYP_S0:
+ printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n");
+ break;
+ case SLP_TYP_S1:
+ printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n");
+ break;
+ case SLP_TYP_S3:
+ printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
+
+ /* Invalidate the cache before going to S3 */
+ wbinvd();
+ break;
+ case SLP_TYP_S4:
+ printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n");
+ break;
+ case SLP_TYP_S5:
+ printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
+
+ /* Disable all GPE */
+ disable_all_gpe();
+
+ /* also iterates over all bridges on bus 0 */
+ busmaster_disable_on_bus(0);
+ break;
+ default:
+ printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n");
+ break;
+ }
+
+ /* Write back to the SLP register to cause the originally intended
+ * event again. We need to set BIT13 (SLP_EN) though to make the
+ * sleep happen.
+ */
+ enable_pm1_control(SLP_EN);
+
+ /* Make sure to stop executing code here for S3/S4/S5 */
+ if (slp_typ > 1)
+ hlt();
+
+ /* In most sleep states, the code flow of this function ends at
+ * the line above. However, if we entered sleep state S1 and wake
+ * up again, we will continue to execute code in this function.
+ */
+ reg32 = inl(pmbase + PM1_CNT);
+ if (reg32 & SCI_EN) {
+ /* The OS is not an ACPI OS, so we set the state to S0 */
+ disable_pm1_control(SLP_EN | SLP_TYP);
+ }
+}
+
+/*
+ * Look for Synchronous IO SMI and use save state from that
+ * core in case we are not running on the same core that
+ * initiated the IO transaction.
+ */
+static em64t100_smm_state_save_area_t *smi_apmc_find_state_save(uint8_t cmd)
+{
+#ifndef CONFIG_MAX_CPUS
+#error CONFIG_MAX_CPUS must be set.
+#endif
+ em64t100_smm_state_save_area_t *state;
+ int node;
+
+ /* Check all nodes looking for the one that issued the IO */
+ for (node = 0; node < CONFIG_MAX_CPUS; node++) {
+ state = smm_get_save_state(node);
+
+ /* Check for Synchronous IO (bit0==1) */
+ if (!(state->io_misc_info & (1 << 0)))
+ continue;
+
+ /* Make sure it was a write (bit4==0) */
+ if (state->io_misc_info & (1 << 4))
+ continue;
+
+ /* Check for APMC IO port */
+ if (((state->io_misc_info >> 16) & 0xff) != APM_CNT)
+ continue;
+
+ /* Check AX against the requested command */
+ if ((state->rax & 0xff) != cmd)
+ continue;
+
+ return state;
+ }
+
+ return NULL;
+}
+
+#if IS_ENABLED(CONFIG_ELOG_GSMI)
+static void southbridge_smi_gsmi(void)
+{
+ u32 *ret, *param;
+ uint8_t sub_command;
+ em64t100_smm_state_save_area_t *io_smi =
+ smi_apmc_find_state_save(ELOG_GSMI_APM_CNT);
+
+ if (!io_smi)
+ return;
+
+ /* Command and return value in EAX */
+ ret = (u32*)&io_smi->rax;
+ sub_command = (uint8_t)(*ret >> 8);
+
+ /* Parameter buffer in EBX */
+ param = (u32*)&io_smi->rbx;
+
+ /* drivers/elog/gsmi.c */
+ *ret = gsmi_exec(sub_command, param);
+}
+#endif
+static void southbridge_smi_apmc(void)
+{
+ uint8_t reg8;
+ em64t100_smm_state_save_area_t *state;
+
+ /* Emulate B2 register as the FADT / Linux expects it */
+
+ reg8 = inb(APM_CNT);
+ switch (reg8) {
+ case APM_CNT_CST_CONTROL:
+ /* Calling this function seems to cause
+ * some kind of race condition in Linux
+ * and causes a kernel oops
+ */
+ printk(BIOS_DEBUG, "C-state control\n");
+ break;
+ case APM_CNT_PST_CONTROL:
+ /* Calling this function seems to cause
+ * some kind of race condition in Linux
+ * and causes a kernel oops
+ */
+ printk(BIOS_DEBUG, "P-state control\n");
+ break;
+ case APM_CNT_ACPI_DISABLE:
+ disable_pm1_control(SCI_EN);
+ printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
+ break;
+ case APM_CNT_ACPI_ENABLE:
+ enable_pm1_control(SCI_EN);
+ printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
+ break;
+ case APM_CNT_GNVS_UPDATE:
+ if (smm_initialized) {
+ printk(BIOS_DEBUG,
+ "SMI#: SMM structures already initialized!\n");
+ return;
+ }
+ state = smi_apmc_find_state_save(reg8);
+ if (state) {
+ /* EBX in the state save contains the GNVS pointer */
+ gnvs = (global_nvs_t *)((uint32_t)state->rbx);
+ smm_initialized = 1;
+ printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs);
+ }
+ break;
+#if IS_ENABLED(CONFIG_ELOG_GSMI)
+ case ELOG_GSMI_APM_CNT:
+ southbridge_smi_gsmi();
+ break;
+#endif
+ }
+
+ mainboard_smi_apmc(reg8);
+}
+
+static void southbridge_smi_pm1(void)
+{
+ uint16_t pm1_sts = clear_pm1_status();
+
+ /* While OSPM is not active, poweroff immediately
+ * on a power button event.
+ */
+ if (pm1_sts & PWRBTN_STS) {
+ // power button pressed
+#if IS_ENABLED(CONFIG_ELOG_GSMI)
+ elog_add_event(ELOG_TYPE_POWER_BUTTON);
+#endif
+ disable_pm1_control(-1UL);
+ enable_pm1_control(SLP_EN | (SLP_TYP_S5 << SLP_TYP_SHIFT));
+ }
+}
+
+static void southbridge_smi_gpe0(void)
+{
+ clear_gpe_status();
+}
+
+static void southbridge_smi_tco(void)
+{
+ uint32_t tco_sts = clear_tco_status();
+
+ /* Any TCO event? */
+ if (!tco_sts)
+ return;
+
+ if (tco_sts & TCO_TIMEOUT) { /* TIMEOUT */
+ /* Handle TCO timeout */
+ printk(BIOS_DEBUG, "TCO Timeout.\n");
+ }
+}
+
+static void southbridge_smi_periodic(void)
+{
+ uint32_t reg32;
+
+ reg32 = inl(get_pmbase() + SMI_EN);
+
+ /* Are periodic SMIs enabled? */
+ if ((reg32 & PERIODIC_EN) == 0)
+ return;
+
+ printk(BIOS_DEBUG, "Periodic SMI.\n");
+}
+
+typedef void (*smi_handler_t)(void);
+
+static const smi_handler_t southbridge_smi[32] = {
+ NULL, // [0] reserved
+ NULL, // [1] reserved
+ NULL, // [2] BIOS_STS
+ NULL, // [3] LEGACY_USB_STS
+ southbridge_smi_sleep, // [4] SLP_SMI_STS
+ southbridge_smi_apmc, // [5] APM_STS
+ NULL, // [6] SWSMI_TMR_STS
+ NULL, // [7] reserved
+ southbridge_smi_pm1, // [8] PM1_STS
+ southbridge_smi_gpe0, // [9] GPE0_STS
+ NULL, // [10] reserved
+ NULL, // [11] reserved
+ NULL, // [12] reserved
+ southbridge_smi_tco, // [13] TCO_STS
+ southbridge_smi_periodic, // [14] PERIODIC_STS
+ NULL, // [15] SERIRQ_SMI_STS
+ NULL, // [16] SMBUS_SMI_STS
+ NULL, // [17] LEGACY_USB2_STS
+ NULL, // [18] INTEL_USB2_STS
+ NULL, // [19] reserved
+ NULL, // [20] PCI_EXP_SMI_STS
+ NULL, // [21] reserved
+ NULL, // [22] reserved
+ NULL, // [23] reserved
+ NULL, // [24] reserved
+ NULL, // [25] reserved
+ NULL, // [26] SPI_STS
+ NULL, // [27] reserved
+ NULL, // [28] PUNIT
+ NULL, // [29] GUNIT
+ NULL, // [30] reserved
+ NULL // [31] reserved
+};
+
+void southbridge_smi_handler(void)
+{
+ int i;
+ uint32_t smi_sts;
+
+ /* We need to clear the SMI status registers, or we won't see what's
+ * happening in the following calls.
+ */
+ smi_sts = clear_smi_status();
+
+ /* Call SMI sub handler for each of the status bits */
+ for (i = 0; i < ARRAY_SIZE(southbridge_smi); i++) {
+ if (!(smi_sts & (1 << i)))
+ continue;
+
+ if (southbridge_smi[i] != NULL) {
+ southbridge_smi[i]();
+ } else {
+ printk(BIOS_DEBUG,
+ "SMI_STS[%d] occured, but no "
+ "handler available.\n", i);
+ }
+ }
+
+ /* The GPIO SMI events do not have a status bit in SMI_STS. Therefore,
+ * these events need to be cleared and checked unconditionally. */
+ mainboard_smi_gpi(clear_alt_status());
+}
diff --git a/src/soc/intel/fsp_baytrail/smm.c b/src/soc/intel/fsp_baytrail/smm.c
new file mode 100644
index 0000000000..d4b3d58350
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/smm.c
@@ -0,0 +1,132 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <cpu/cpu.h>
+#include <cpu/x86/smm.h>
+#include <string.h>
+
+#include <baytrail/iomap.h>
+#include <baytrail/pmc.h>
+#include <baytrail/smm.h>
+
+/* Save the gpio route register. The settings are committed from
+ * southcluster_smm_enable_smi(). */
+static uint32_t gpio_route;
+
+void southcluster_smm_save_gpio_route(uint32_t route)
+{
+ gpio_route = route;
+}
+
+void southcluster_smm_clear_state(void)
+{
+ uint32_t smi_en;
+
+ /* Log events from chipset before clearing */
+ southcluster_log_state();
+
+ printk(BIOS_DEBUG, "Initializing Southbridge SMI...");
+ printk(BIOS_SPEW, " pmbase = 0x%04x\n", get_pmbase());
+
+ smi_en = inl(get_pmbase() + SMI_EN);
+ if (smi_en & APMC_EN) {
+ printk(BIOS_INFO, "SMI# handler already enabled?\n");
+ return;
+ }
+
+ /* Dump and clear status registers */
+ clear_smi_status();
+ clear_pm1_status();
+ clear_tco_status();
+ clear_gpe_status();
+ clear_alt_status();
+ clear_pmc_status();
+}
+
+static void southcluster_smm_route_gpios(void)
+{
+ const unsigned long gpio_rout = PMC_BASE_ADDRESS + GPIO_ROUT;
+ const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI;
+ uint32_t alt_gpio_reg = 0;
+ uint32_t route_reg = gpio_route;
+ int i;
+
+ printk(BIOS_DEBUG, "GPIO_ROUT = %08x\n", route_reg);
+
+ /* Start the routing for the specific gpios. */
+ write32(gpio_rout, route_reg);
+
+ /* Enable SMIs for the gpios that are set to trigger the SMI. */
+ for (i = 0; i < 16; i++) {
+ if ((route_reg & ROUTE_MASK) == ROUTE_SMI) {
+ alt_gpio_reg |= (1 << i);
+ }
+ route_reg >>= 2;
+ }
+ printk(BIOS_DEBUG, "ALT_GPIO_SMI = %08x\n", alt_gpio_reg);
+
+ outl(alt_gpio_reg, alt_gpio_smi);
+}
+
+void southcluster_smm_enable_smi(void)
+{
+
+ printk(BIOS_DEBUG, "Enabling SMIs.\n");
+ /* Configure events Disable pcie wake. */
+ enable_pm1(PWRBTN_EN | GBL_EN | PCIEXPWAK_DIS);
+ disable_gpe(PME_B0_EN);
+
+ /* Set up the GPIO route. */
+ southcluster_smm_route_gpios();
+
+ /* Enable SMI generation:
+ * - on APMC writes (io 0xb2)
+ * - on writes to SLP_EN (sleep states)
+ * - on writes to GBL_RLS (bios commands)
+ * No SMIs:
+ * - on TCO events
+ * - on microcontroller writes (io 0x62/0x66)
+ */
+ enable_smi(APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS);
+}
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
+{
+ /*
+ * Issue SMI to set the gnvs pointer in SMM.
+ * tcg and smi1 are unused.
+ *
+ * EAX = APM_CNT_GNVS_UPDATE
+ * EBX = gnvs pointer
+ * EDX = APM_CNT
+ */
+ asm volatile (
+ "outb %%al, %%dx\n\t"
+ : /* ignore result */
+ : "a" (APM_CNT_GNVS_UPDATE),
+ "b" ((uint32_t)gnvs),
+ "d" (APM_CNT)
+ );
+}
diff --git a/src/soc/intel/fsp_baytrail/southcluster.c b/src/soc/intel/fsp_baytrail/southcluster.c
new file mode 100644
index 0000000000..2216902d6c
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/southcluster.c
@@ -0,0 +1,661 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <cbmem.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_def.h>
+#include <pc80/mc146818rtc.h>
+#include <pc80/i8254.h>
+#include <pc80/i8259.h>
+#include <pc80/isa-dma.h>
+#include <romstage_handoff.h>
+
+#include <baytrail/baytrail.h>
+#include <baytrail/iomap.h>
+#include <baytrail/irq.h>
+#include <baytrail/lpc.h>
+#include <baytrail/nvs.h>
+#include <baytrail/pci_devs.h>
+#include <baytrail/pmc.h>
+#include <baytrail/ramstage.h>
+#include "chip.h"
+
+#define ENABLE_ACPI_MODE_IN_COREBOOT 0
+#define TEST_SMM_FLASH_LOCKDOWN 0
+
+typedef struct soc_intel_fsp_baytrail_config config_t;
+
+static inline void
+add_mmio_resource(device_t dev, int i, unsigned long addr, unsigned long size)
+{
+ mmio_resource(dev, i, addr >> 10, size >> 10);
+}
+
+static void sc_add_mmio_resources(device_t dev)
+{
+#ifndef CONFIG_VIRTUAL_ROM_SIZE
+#error CONFIG_VIRTUAL_ROM_SIZE must be set.
+#endif
+ add_mmio_resource(dev, 0xfeb, ABORT_BASE_ADDRESS, ABORT_BASE_SIZE);
+ add_mmio_resource(dev, PBASE, PMC_BASE_ADDRESS, PMC_BASE_SIZE);
+ add_mmio_resource(dev, IOBASE, IO_BASE_ADDRESS, IO_BASE_SIZE);
+ add_mmio_resource(dev, IBASE, ILB_BASE_ADDRESS, ILB_BASE_SIZE);
+ add_mmio_resource(dev, SBASE, SPI_BASE_ADDRESS, SPI_BASE_SIZE);
+ add_mmio_resource(dev, MPBASE, MPHY_BASE_ADDRESS, MPHY_BASE_SIZE);
+ add_mmio_resource(dev, PUBASE, PUNIT_BASE_ADDRESS, PUNIT_BASE_SIZE);
+ add_mmio_resource(dev, RCBA, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE);
+ add_mmio_resource(dev, 0xfff, 0xffffffff - CONFIG_VIRTUAL_ROM_SIZE + 1,
+ CONFIG_VIRTUAL_ROM_SIZE); /* BIOS ROM */
+ add_mmio_resource(dev, 0xfec, IO_APIC_ADDR, 0x00001000); /* IOAPIC */
+}
+
+/* Default IO range claimed by the LPC device. The upper bound is exclusive. */
+#define LPC_DEFAULT_IO_RANGE_LOWER 0
+#define LPC_DEFAULT_IO_RANGE_UPPER 0x1000
+
+static void sc_enable_ioapic(struct device *dev)
+{
+ int i;
+ u32 reg32;
+ volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
+ volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
+ u32 ilb_base = pci_read_config32(dev, IBASE) & ~0x0f;
+
+ /*
+ * Enable ACPI I/O and power management.
+ * Set SCI IRQ to IRQ9
+ */
+ write32(ilb_base + ILB_OIC, 0x100); /* AEN */
+ reg32 = read32(ilb_base + ILB_OIC); /* Read back per BWG */
+ write32(ilb_base + ILB_ACTL, 0); /* ACTL bit 2:0 SCIS IRQ9 */
+
+ *ioapic_index = 0;
+ *ioapic_data = (1 << 25);
+
+ /* affirm full set of redirection table entries ("write once") */
+ *ioapic_index = 1;
+ reg32 = *ioapic_data;
+ *ioapic_index = 1;
+ *ioapic_data = reg32;
+
+ *ioapic_index = 0;
+ reg32 = *ioapic_data;
+ printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
+ if (reg32 != (1 << 25))
+ die("APIC Error\n");
+
+ printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
+ for (i=0; i<3; i++) {
+ *ioapic_index = i;
+ printk(BIOS_SPEW, " reg 0x%04x:", i);
+ reg32 = *ioapic_data;
+ printk(BIOS_SPEW, " 0x%08x\n", reg32);
+ }
+
+ *ioapic_index = 3; /* Select Boot Configuration register. */
+ *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
+}
+
+static void sc_enable_serial_irqs(struct device *dev)
+{
+#ifdef SETUPSERIQ /* NOT defined. Remove when the TODO is done. */
+ /*
+ * TODO: SERIRQ seems to have a number of problems on baytrail.
+ * With it enabled, we get some spurious interrupts (ps2)
+ * in seabios. It also caused IOCHK# NMIs. Remove it
+ * until we understand how it needs to be configured.
+ */
+ u8 reg8;
+ u32 ibase = pci_read_config32(dev, IBASE) & ~0xF;
+
+ /*
+ * Disable the IOCHK# NMI. Let the NMI handler enable it if it needs.
+ */
+ reg8 = inb(0x61);
+ reg8 &= 0x0f; /* Higher Nibble must be 0 */
+ reg8 |= (1 << 3); /* IOCHK# NMI Disable for now */
+ outb(reg8, 0x61);
+
+ write32(ibase + ILB_OIC, read32(ibase + ILB_OIC) | SIRQEN);
+ write8(ibase + ILB_SERIRQ_CNTL, SCNT_CONTINUOUS_MODE);
+
+#if !IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE)
+ /*
+ * SoC requires that the System BIOS first set the SERIRQ logic to
+ * continuous mode operation for at least one frame before switching
+ * it into quiet mode operation.
+ */
+ outb(0x00, 0xED); /* I/O Delay to get the 1 frame */
+ write8(ibase + ILB_SERIRQ_CNTL, SCNT_QUIET_MODE);
+#endif
+#endif /* DON'T SET UP IRQS */
+}
+
+/*
+ * Write PCI config space IRQ assignments. PCI devices have the INT_LINE
+ * (0x3C) and INT_PIN (0x3D) registers which report interrupt routing
+ * information to operating systems and drivers. The INT_PIN register is
+ * generally read only and reports which interrupt pin A - D it uses. The
+ * INT_LINE register is configurable and reports which IRQ (generally the
+ * PIC IRQs 1 - 15) it will use. This needs to take interrupt pin swizzling
+ * on devices that are downstream on a PCI bridge into account.
+ *
+ * This function will loop through all enabled PCI devices and program the
+ * INT_LINE register with the correct PIC IRQ number for the INT_PIN that it
+ * uses. It then configures each interrupt in the pic to be level triggered.
+ */
+static void write_pci_config_irqs(void)
+{
+ device_t irq_dev;
+ device_t targ_dev;
+ uint8_t int_line = 0;
+ uint8_t original_int_pin = 0;
+ uint8_t new_int_pin = 0;
+ uint16_t current_bdf = 0;
+ uint16_t parent_bdf = 0;
+ uint8_t pirq = 0;
+ uint8_t device_num = 0;
+ const struct baytrail_irq_route *ir = &global_baytrail_irq_route;
+
+ if (ir == NULL) {
+ printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because"
+ " 'global_baytrail_irq_route' structure does not exist\n");
+ return;
+ }
+
+ /*
+ * Loop through all enabled devices and program their
+ * INT_LINE, INT_PIN registers from values taken from
+ * the Interrupt Route registers in the ILB
+ */
+ printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n");
+ for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
+
+ if ((irq_dev->path.type != DEVICE_PATH_PCI) ||
+ (!irq_dev->enabled))
+ continue;
+
+ current_bdf = irq_dev->path.pci.devfn |
+ irq_dev->bus->secondary << 8;
+
+ /*
+ * Step 1: Get the INT_PIN and device structure to look for
+ * in the pirq_data table defined in the mainboard directory.
+ */
+ targ_dev = NULL;
+ new_int_pin = get_pci_irq_pins(irq_dev, &targ_dev);
+ if (targ_dev == NULL || new_int_pin < 1)
+ continue;
+
+ /* Get the original INT_PIN for record keeping */
+ original_int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
+
+ parent_bdf = targ_dev->path.pci.devfn
+ | targ_dev->bus->secondary << 8;
+ device_num = PCI_SLOT(parent_bdf);
+
+ if (ir->pcidev[device_num] == 0) {
+ printk(BIOS_WARNING,
+ "Warning: PCI Device %d does not have an IRQ entry, skipping it\n",
+ device_num);
+ continue;
+ }
+
+ /* Find the PIRQ that is attached to the INT_PIN this device uses */
+ pirq = (ir->pcidev[device_num] >> ((new_int_pin - 1) * 4)) & 0xF;
+
+ /* Get the INT_LINE this device/function will use */
+ int_line = ir->pic[pirq];
+
+ if (int_line != PIRQ_PIC_IRQDISABLE) {
+ /* Set this IRQ to level triggered since it is used by a PCI device */
+ i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED);
+ /* Set the Interrupt Line register in PCI config space */
+ pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
+ } else {
+ /* Set the Interrupt line register as "unknown or unused" */
+ pci_write_config8(irq_dev, PCI_INTERRUPT_LINE,
+ PIRQ_PIC_UNKNOWN_UNUSED);
+ }
+
+ printk(BIOS_SPEW, "\tINT_PIN\t\t: %d (%s)\n",
+ original_int_pin, pin_to_str(original_int_pin));
+ if (parent_bdf != current_bdf)
+ printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n",
+ new_int_pin, pin_to_str(new_int_pin));
+ printk(BIOS_SPEW, "\tPIRQ\t\t: %c\n"
+ "\tINT_LINE\t: 0x%X (IRQ %d)\n",
+ 'A' + pirq, int_line, int_line);
+ }
+ printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n");
+}
+
+static void sc_pirq_init(device_t dev)
+{
+ int i, j;
+ int pirq;
+ const unsigned long pr_base = ILB_BASE_ADDRESS + 0x08;
+ const unsigned long ir_base = ILB_BASE_ADDRESS + 0x20;
+ const unsigned long actl = ILB_BASE_ADDRESS + ACTL;
+ const struct baytrail_irq_route *ir = &global_baytrail_irq_route;
+
+ /* Set up the PIRQ PIC routing based on static config. */
+ printk(BIOS_SPEW, "Start writing IRQ assignments\n"
+ "PIRQ\tA \tB \tC \tD \tE \tF \tG \tH\n"
+ "IRQ ");
+ for (i = 0; i < NUM_PIRQS; i++) {
+ write8(pr_base + i*sizeof(ir->pic[i]), ir->pic[i]);
+ printk(BIOS_SPEW, "\t%d", ir->pic[i]);
+ }
+ printk(BIOS_SPEW, "\n\n");
+
+ /* Set up the per device PIRQ routing based on static config. */
+ printk(BIOS_SPEW, "\t\t\tPIRQ[A-H] routed to each INT_PIN[A-D]\n"
+ "Dev\tINTA (IRQ)\tINTB (IRQ)\tINTC (IRQ)\tINTD (IRQ)\n");
+ for (i = 0; i < NUM_OF_PCI_DEVS; i++) {
+ write16(ir_base + i*sizeof(ir->pcidev[i]), ir->pcidev[i]);
+
+ /* If the entry is more than just 0, print it out */
+ if(ir->pcidev[i]) {
+ printk(BIOS_SPEW, " %d: ", i);
+ for (j = 0; j < 4; j++) {
+ pirq = (ir->pcidev[i] >> (j * 4)) & 0xF;
+ printk(BIOS_SPEW, "\t%-4c (%d)", 'A' + pirq, ir->pic[pirq]);
+ }
+ printk(BIOS_SPEW, "\n");
+ }
+ }
+
+ /* Route SCI to IRQ9 */
+ write32(actl, (read32(actl) & ~SCIS_MASK) | SCIS_IRQ9);
+ printk(BIOS_SPEW, "Finished writing IRQ assignments\n");
+
+ /* Write IRQ assignments to PCI config space */
+ write_pci_config_irqs();
+}
+
+static inline int io_range_in_default(int base, int size)
+{
+ /* Does it start above the range? */
+ if (base >= LPC_DEFAULT_IO_RANGE_UPPER)
+ return 0;
+
+ /* Is it entirely contained? */
+ if (base >= LPC_DEFAULT_IO_RANGE_LOWER &&
+ (base + size) < LPC_DEFAULT_IO_RANGE_UPPER)
+ return 1;
+
+ /* This will return not in range for partial overlaps. */
+ return 0;
+}
+
+/*
+ * Note: this function assumes there is no overlap with the default LPC device's
+ * claimed range: LPC_DEFAULT_IO_RANGE_LOWER -> LPC_DEFAULT_IO_RANGE_UPPER.
+ */
+static void sc_add_io_resource(device_t dev, int base, int size, int index)
+{
+ struct resource *res;
+
+ if (io_range_in_default(base, size))
+ return;
+
+ res = new_resource(dev, index);
+ res->base = base;
+ res->size = size;
+ res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED |
+ IORESOURCE_FIXED;
+}
+
+static void sc_add_io_resources(device_t dev)
+{
+ struct resource *res;
+ u8 io_index = 0;
+
+ /*
+ * Add the default claimed IO range for the LPC device
+ * and mark it as subtractive decode.
+ */
+ res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
+ res->base = LPC_DEFAULT_IO_RANGE_LOWER;
+ res->size = LPC_DEFAULT_IO_RANGE_UPPER - LPC_DEFAULT_IO_RANGE_LOWER;
+ res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
+ IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+
+ /* GPIO */
+ sc_add_io_resource(dev, GPIO_BASE_ADDRESS, GPIO_BASE_SIZE, GBASE);
+
+ /* ACPI */
+ sc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, ABASE);
+}
+
+static void sc_read_resources(device_t dev)
+{
+ /* Get the normal PCI resources of this device. */
+ pci_dev_read_resources(dev);
+
+ /* Add non-standard MMIO resources. */
+ sc_add_mmio_resources(dev);
+
+ /* Add IO resources. */
+ sc_add_io_resources(dev);
+}
+
+static void enable_hpet(void)
+{
+}
+
+static void sc_init(struct device *dev)
+{
+ u32 ibase;
+
+ printk(BIOS_DEBUG, "soc: southcluster_init\n");
+
+ ibase = pci_read_config32(dev, IBASE) & ~0xF;
+
+ write8(ibase + ILB_MC, 0);
+
+ /* Set the value for PCI command register. */
+ pci_write_config16(dev, PCI_COMMAND,
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
+
+ /* IO APIC initialization. */
+ sc_enable_ioapic(dev);
+
+ sc_enable_serial_irqs(dev);
+
+ /* Setup the PIRQ. */
+ sc_pirq_init(dev);
+
+ /* Initialize the High Precision Event Timers, if present. */
+ enable_hpet();
+
+ /* Initialize ISA DMA. */
+ isa_dma_init();
+
+ setup_i8259();
+
+ setup_i8254();
+}
+
+/*
+ * Common code for the south cluster devices.
+ */
+
+/* Set bit in function disable register to hide this device. */
+static void sc_disable_devfn(device_t dev)
+{
+ const unsigned long func_dis = PMC_BASE_ADDRESS + FUNC_DIS;
+ const unsigned long func_dis2 = PMC_BASE_ADDRESS + FUNC_DIS2;
+ uint32_t fd_mask = 0;
+ uint32_t fd2_mask = 0;
+
+#define SET_DIS_MASK(name_) \
+ case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC): \
+ fd_mask |= name_ ## _DIS
+#define SET_DIS_MASK2(name_) \
+ case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC): \
+ fd2_mask |= name_ ## _DIS
+
+ switch (dev->path.pci.devfn) {
+ SET_DIS_MASK(MIPI);
+ break;
+ SET_DIS_MASK(EMMC);
+ break;
+ SET_DIS_MASK(SDIO);
+ break;
+ SET_DIS_MASK(SD);
+ break;
+ SET_DIS_MASK(SATA);
+ break;
+ SET_DIS_MASK(XHCI);
+ /* Disable super speed PHY when XHCI is not available. */
+ fd2_mask |= USH_SS_PHY_DIS;
+ break;
+ SET_DIS_MASK(LPE);
+ break;
+ SET_DIS_MASK(MMC45);
+ break;
+ SET_DIS_MASK(SIO_DMA1);
+ break;
+ SET_DIS_MASK(I2C1);
+ break;
+ SET_DIS_MASK(I2C2);
+ break;
+ SET_DIS_MASK(I2C3);
+ break;
+ SET_DIS_MASK(I2C4);
+ break;
+ SET_DIS_MASK(I2C5);
+ break;
+ SET_DIS_MASK(I2C6);
+ break;
+ SET_DIS_MASK(I2C7);
+ break;
+ SET_DIS_MASK(TXE);
+ break;
+ SET_DIS_MASK(HDA);
+ break;
+ SET_DIS_MASK(PCIE_PORT1);
+ break;
+ SET_DIS_MASK(PCIE_PORT2);
+ break;
+ SET_DIS_MASK(PCIE_PORT3);
+ break;
+ SET_DIS_MASK(PCIE_PORT4);
+ break;
+ SET_DIS_MASK(EHCI);
+ break;
+ SET_DIS_MASK(SIO_DMA2);
+ break;
+ SET_DIS_MASK(PWM1);
+ break;
+ SET_DIS_MASK(PWM2);
+ break;
+ SET_DIS_MASK(HSUART1);
+ break;
+ SET_DIS_MASK(HSUART2);
+ break;
+ SET_DIS_MASK(SPI);
+ break;
+ SET_DIS_MASK2(SMBUS);
+ break;
+ SET_DIS_MASK(OTG);
+ /* Disable OTG PHY when OTG is not available. */
+ fd2_mask |= OTG_SS_PHY_DIS;
+ break;
+ }
+
+ if (fd_mask != 0) {
+ write32(func_dis, read32(func_dis) | fd_mask);
+ /* Ensure posted write hits. */
+ read32(func_dis);
+ }
+
+ if (fd2_mask != 0) {
+ write32(func_dis2, read32(func_dis2) | fd2_mask);
+ /* Ensure posted write hits. */
+ read32(func_dis2);
+ }
+}
+
+static inline void set_d3hot_bits(device_t dev, int offset)
+{
+ uint32_t reg8;
+ printk(BIOS_DEBUG, "Power management CAP offset 0x%x.\n", offset);
+ reg8 = pci_read_config8(dev, offset + 4);
+ reg8 |= 0x3;
+ pci_write_config8(dev, offset + 4, reg8);
+}
+
+/* Parts of the audio subsystem are powered by the HDA device. Therefore, one
+ * cannot put HDA into D3Hot. Instead perform this workaround to make some of
+ * the audio paths work for LPE audio. */
+static void hda_work_around(device_t dev)
+{
+ unsigned long gctl = TEMP_BASE_ADDRESS + 0x8;
+
+ /* Need to set magic register 0x43 to 0xd7 in config space. */
+ pci_write_config8(dev, 0x43, 0xd7);
+
+ /* Need to set bit 0 of GCTL to take the device out of reset. However,
+ * that requires setting up the 64-bit BAR. */
+ pci_write_config32(dev, PCI_BASE_ADDRESS_0, TEMP_BASE_ADDRESS);
+ pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0);
+ pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY);
+ write32(gctl, read32(gctl) | 0x1);
+ pci_write_config8(dev, PCI_COMMAND, 0);
+ pci_write_config32(dev, PCI_BASE_ADDRESS_0, 0);
+}
+
+static int place_device_in_d3hot(device_t dev)
+{
+ unsigned offset;
+
+ /* Parts of the HDA block are used for LPE audio as well.
+ * Therefore assume the HDA will never be put into D3Hot. */
+ if (dev->path.pci.devfn == PCI_DEVFN(HDA_DEV, HDA_FUNC)) {
+ hda_work_around(dev);
+ return 0;
+ }
+
+ offset = pci_find_capability(dev, PCI_CAP_ID_PM);
+
+ if (offset != 0) {
+ set_d3hot_bits(dev, offset);
+ return 0;
+ }
+
+ /* For some reason some of the devices don't have the capability
+ * pointer set correctly. Work around this by hard coding the offset. */
+#define DEV_CASE(name_) \
+ case PCI_DEVFN(name_ ## _DEV, name_ ## _FUNC)
+
+ switch (dev->path.pci.devfn) {
+ DEV_CASE(MIPI):
+ DEV_CASE(SDIO):
+ DEV_CASE(EMMC):
+ DEV_CASE(SD):
+ DEV_CASE(MMC45):
+ DEV_CASE(LPE):
+ DEV_CASE(SIO_DMA1):
+ DEV_CASE(I2C1):
+ DEV_CASE(I2C2):
+ DEV_CASE(I2C3):
+ DEV_CASE(I2C4):
+ DEV_CASE(I2C5):
+ DEV_CASE(I2C6):
+ DEV_CASE(I2C7):
+ DEV_CASE(SIO_DMA2):
+ DEV_CASE(PWM1):
+ DEV_CASE(PWM2):
+ DEV_CASE(HSUART1):
+ DEV_CASE(HSUART2):
+ DEV_CASE(SPI):
+ DEV_CASE(OTG):
+ offset = 0x80;
+ break;
+ DEV_CASE(SATA):
+ DEV_CASE(XHCI):
+ DEV_CASE(EHCI):
+ offset = 0x70;
+ break;
+ DEV_CASE(HDA):
+ DEV_CASE(SMBUS):
+ offset = 0x50;
+ break;
+ DEV_CASE(TXE):
+ /* TXE cannot be placed in D3Hot. */
+ return 0;
+ break;
+ DEV_CASE(PCIE_PORT1):
+ DEV_CASE(PCIE_PORT2):
+ DEV_CASE(PCIE_PORT3):
+ DEV_CASE(PCIE_PORT4):
+ offset = 0xa0;
+ break;
+ }
+
+ if (offset != 0) {
+ set_d3hot_bits(dev, offset);
+ return 0;
+ }
+
+ return -1;
+}
+
+/* Common PCI device function disable. */
+void southcluster_enable_dev(device_t dev)
+{
+ uint32_t reg32;
+
+ if (!dev->enabled) {
+ int slot = PCI_SLOT(dev->path.pci.devfn);
+ int func = PCI_FUNC(dev->path.pci.devfn);
+ printk(BIOS_DEBUG, "%s: Disabling device: %02x.%01x\n",
+ dev_path(dev), slot, func);
+
+ /* Ensure memory, io, and bus master are all disabled */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 &= ~(PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ /* Place device in D3Hot */
+ if (place_device_in_d3hot(dev) < 0) {
+ printk(BIOS_WARNING,
+ "Could not place %02x.%01x into D3Hot. "
+ "Keeping device visible.\n", slot, func);
+ return;
+ }
+ /* Disable this device if possible */
+ sc_disable_devfn(dev);
+ } else {
+ /* Enable SERR */
+ reg32 = pci_read_config32(dev, PCI_COMMAND);
+ reg32 |= PCI_COMMAND_SERR;
+ pci_write_config32(dev, PCI_COMMAND, reg32);
+ }
+}
+
+static struct device_operations device_ops = {
+ .read_resources = sc_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = NULL,
+ .init = sc_init,
+ .enable = southcluster_enable_dev,
+ .scan_bus = scan_static_bus,
+ .ops_pci = &soc_pci_ops,
+};
+
+static const struct pci_driver southcluster __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = LPC_DEVID,
+};
diff --git a/src/soc/intel/fsp_baytrail/spi.c b/src/soc/intel/fsp_baytrail/spi.c
new file mode 100644
index 0000000000..ddec2e0987
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/spi.c
@@ -0,0 +1,652 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This file is derived from the flashrom project. */
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <delay.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <spi_flash.h>
+
+#include <baytrail/lpc.h>
+#include <baytrail/pci_devs.h>
+
+#ifdef __SMM__
+#define pci_read_config_byte(dev, reg, targ)\
+ *(targ) = pci_read_config8(dev, reg)
+#define pci_read_config_word(dev, reg, targ)\
+ *(targ) = pci_read_config16(dev, reg)
+#define pci_read_config_dword(dev, reg, targ)\
+ *(targ) = pci_read_config32(dev, reg)
+#define pci_write_config_byte(dev, reg, val)\
+ pci_write_config8(dev, reg, val)
+#define pci_write_config_word(dev, reg, val)\
+ pci_write_config16(dev, reg, val)
+#define pci_write_config_dword(dev, reg, val)\
+ pci_write_config32(dev, reg, val)
+#else /* !__SMM__ */
+#include <device/device.h>
+#include <device/pci.h>
+#define pci_read_config_byte(dev, reg, targ)\
+ *(targ) = pci_read_config8(dev, reg)
+#define pci_read_config_word(dev, reg, targ)\
+ *(targ) = pci_read_config16(dev, reg)
+#define pci_read_config_dword(dev, reg, targ)\
+ *(targ) = pci_read_config32(dev, reg)
+#define pci_write_config_byte(dev, reg, val)\
+ pci_write_config8(dev, reg, val)
+#define pci_write_config_word(dev, reg, val)\
+ pci_write_config16(dev, reg, val)
+#define pci_write_config_dword(dev, reg, val)\
+ pci_write_config32(dev, reg, val)
+#endif /* !__SMM__ */
+
+typedef struct spi_slave ich_spi_slave;
+
+static int ichspi_lock = 0;
+
+typedef struct ich9_spi_regs {
+ uint32_t bfpr;
+ uint16_t hsfs;
+ uint16_t hsfc;
+ uint32_t faddr;
+ uint32_t _reserved0;
+ uint32_t fdata[16];
+ uint32_t frap;
+ uint32_t freg[5];
+ uint32_t _reserved1[3];
+ uint32_t pr[5];
+ uint32_t _reserved2[2];
+ uint8_t ssfs;
+ uint8_t ssfc[3];
+ uint16_t preop;
+ uint16_t optype;
+ uint8_t opmenu[8];
+ uint32_t bbar;
+ uint8_t _reserved3[12];
+ uint32_t fdoc;
+ uint32_t fdod;
+ uint8_t _reserved4[8];
+ uint32_t afc;
+ uint32_t lvscc;
+ uint32_t uvscc;
+ uint8_t _reserved5[4];
+ uint32_t fpb;
+ uint8_t _reserved6[28];
+ uint32_t srdl;
+ uint32_t srdc;
+ uint32_t srd;
+} __attribute__((packed)) ich9_spi_regs;
+
+typedef struct ich_spi_controller {
+ int locked;
+
+ uint8_t *opmenu;
+ int menubytes;
+ uint16_t *preop;
+ uint16_t *optype;
+ uint32_t *addr;
+ uint8_t *data;
+ unsigned databytes;
+ uint8_t *status;
+ uint16_t *control;
+ uint32_t *bbar;
+} ich_spi_controller;
+
+static ich_spi_controller cntlr;
+
+enum {
+ SPIS_SCIP = 0x0001,
+ SPIS_GRANT = 0x0002,
+ SPIS_CDS = 0x0004,
+ SPIS_FCERR = 0x0008,
+ SSFS_AEL = 0x0010,
+ SPIS_LOCK = 0x8000,
+ SPIS_RESERVED_MASK = 0x7ff0,
+ SSFS_RESERVED_MASK = 0x7fe2
+};
+
+enum {
+ SPIC_SCGO = 0x000002,
+ SPIC_ACS = 0x000004,
+ SPIC_SPOP = 0x000008,
+ SPIC_DBC = 0x003f00,
+ SPIC_DS = 0x004000,
+ SPIC_SME = 0x008000,
+ SSFC_SCF_MASK = 0x070000,
+ SSFC_RESERVED = 0xf80000
+};
+
+enum {
+ HSFS_FDONE = 0x0001,
+ HSFS_FCERR = 0x0002,
+ HSFS_AEL = 0x0004,
+ HSFS_BERASE_MASK = 0x0018,
+ HSFS_BERASE_SHIFT = 3,
+ HSFS_SCIP = 0x0020,
+ HSFS_FDOPSS = 0x2000,
+ HSFS_FDV = 0x4000,
+ HSFS_FLOCKDN = 0x8000
+};
+
+enum {
+ HSFC_FGO = 0x0001,
+ HSFC_FCYCLE_MASK = 0x0006,
+ HSFC_FCYCLE_SHIFT = 1,
+ HSFC_FDBC_MASK = 0x3f00,
+ HSFC_FDBC_SHIFT = 8,
+ HSFC_FSMIE = 0x8000
+};
+
+enum {
+ SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0,
+ SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1,
+ SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2,
+ SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3
+};
+
+#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)
+
+static u8 readb_(const void *addr)
+{
+ u8 v = read8((unsigned long)addr);
+ printk(BIOS_DEBUG, "read %2.2x from %4.4x\n",
+ v, ((unsigned) addr & 0xffff) - 0xf020);
+ return v;
+}
+
+static u16 readw_(const void *addr)
+{
+ u16 v = read16((unsigned long)addr);
+ printk(BIOS_DEBUG, "read %4.4x from %4.4x\n",
+ v, ((unsigned) addr & 0xffff) - 0xf020);
+ return v;
+}
+
+static u32 readl_(const void *addr)
+{
+ u32 v = read32((unsigned long)addr);
+ printk(BIOS_DEBUG, "read %8.8x from %4.4x\n",
+ v, ((unsigned) addr & 0xffff) - 0xf020);
+ return v;
+}
+
+static void writeb_(u8 b, const void *addr)
+{
+ write8((unsigned long)addr, b);
+ printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n",
+ b, ((unsigned) addr & 0xffff) - 0xf020);
+}
+
+static void writew_(u16 b, const void *addr)
+{
+ write16((unsigned long)addr, b);
+ printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n",
+ b, ((unsigned) addr & 0xffff) - 0xf020);
+}
+
+static void writel_(u32 b, const void *addr)
+{
+ write32((unsigned long)addr, b);
+ printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n",
+ b, ((unsigned) addr & 0xffff) - 0xf020);
+}
+
+#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */
+
+#define readb_(a) read8((uint32_t)a)
+#define readw_(a) read16((uint32_t)a)
+#define readl_(a) read32((uint32_t)a)
+#define writeb_(val, addr) write8((uint32_t)addr, val)
+#define writew_(val, addr) write16((uint32_t)addr, val)
+#define writel_(val, addr) write32((uint32_t)addr, val)
+
+#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */
+
+static void write_reg(const void *value, void *dest, uint32_t size)
+{
+ const uint8_t *bvalue = value;
+ uint8_t *bdest = dest;
+
+ while (size >= 4) {
+ writel_(*(const uint32_t *)bvalue, bdest);
+ bdest += 4; bvalue += 4; size -= 4;
+ }
+ while (size) {
+ writeb_(*bvalue, bdest);
+ bdest++; bvalue++; size--;
+ }
+}
+
+static void read_reg(const void *src, void *value, uint32_t size)
+{
+ const uint8_t *bsrc = src;
+ uint8_t *bvalue = value;
+
+ while (size >= 4) {
+ *(uint32_t *)bvalue = readl_(bsrc);
+ bsrc += 4; bvalue += 4; size -= 4;
+ }
+ while (size) {
+ *bvalue = readb_(bsrc);
+ bsrc++; bvalue++; size--;
+ }
+}
+
+static void ich_set_bbar(uint32_t minaddr)
+{
+ const uint32_t bbar_mask = 0x00ffff00;
+ uint32_t ichspi_bbar;
+
+ minaddr &= bbar_mask;
+ ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask;
+ ichspi_bbar |= minaddr;
+ writel_(ichspi_bbar, cntlr.bbar);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ printk(BIOS_DEBUG, "spi_cs_is_valid used but not implemented\n");
+ return 0;
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ ich_spi_slave *slave = malloc(sizeof(*slave));
+
+ if (!slave) {
+ printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n");
+ return NULL;
+ }
+
+ memset(slave, 0, sizeof(*slave));
+
+ slave->bus = bus;
+ slave->cs = cs;
+ return slave;
+}
+
+static ich9_spi_regs *spi_regs(void)
+{
+ device_t dev;
+ uint32_t sbase;
+
+#ifdef __SMM__
+ dev = PCI_DEV(0, LPC_DEV, LPC_FUNC);
+#else
+ dev = dev_find_slot(0, PCI_DEVFN(LPC_DEV, LPC_FUNC));
+#endif
+ pci_read_config_dword(dev, SBASE, &sbase);
+ sbase &= ~0x1ff;
+
+ return (void *)sbase;
+}
+
+void spi_init(void)
+{
+ ich9_spi_regs *ich9_spi = spi_regs();
+
+ ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN;
+ cntlr.opmenu = ich9_spi->opmenu;
+ cntlr.menubytes = sizeof(ich9_spi->opmenu);
+ cntlr.optype = &ich9_spi->optype;
+ cntlr.addr = &ich9_spi->faddr;
+ cntlr.data = (uint8_t *)ich9_spi->fdata;
+ cntlr.databytes = sizeof(ich9_spi->fdata);
+ cntlr.status = &ich9_spi->ssfs;
+ cntlr.control = (uint16_t *)ich9_spi->ssfc;
+ cntlr.bbar = &ich9_spi->bbar;
+ cntlr.preop = &ich9_spi->preop;
+ ich_set_bbar(0);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ /* Handled by ICH automatically. */
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ /* Handled by ICH automatically. */
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ /* Handled by ICH automatically. */
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ /* Handled by ICH automatically. */
+}
+
+typedef struct spi_transaction {
+ const uint8_t *out;
+ uint32_t bytesout;
+ uint8_t *in;
+ uint32_t bytesin;
+ uint8_t type;
+ uint8_t opcode;
+ uint32_t offset;
+} spi_transaction;
+
+static inline void spi_use_out(spi_transaction *trans, unsigned bytes)
+{
+ trans->out += bytes;
+ trans->bytesout -= bytes;
+}
+
+static inline void spi_use_in(spi_transaction *trans, unsigned bytes)
+{
+ trans->in += bytes;
+ trans->bytesin -= bytes;
+}
+
+static void spi_setup_type(spi_transaction *trans)
+{
+ trans->type = 0xFF;
+
+ /* Try to guess spi type from read/write sizes. */
+ if (trans->bytesin == 0) {
+ if (trans->bytesout > 4)
+ /*
+ * If bytesin = 0 and bytesout > 4, we presume this is
+ * a write data operation, which is accompanied by an
+ * address.
+ */
+ trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
+ else
+ trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
+ return;
+ }
+
+ if (trans->bytesout == 1) { /* and bytesin is > 0 */
+ trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
+ return;
+ }
+
+ if (trans->bytesout == 4) { /* and bytesin is > 0 */
+ trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
+ }
+
+ /* Fast read command is called with 5 bytes instead of 4 */
+ if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
+ trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
+ --trans->bytesout;
+ }
+}
+
+static int spi_setup_opcode(spi_transaction *trans)
+{
+ uint16_t optypes;
+ uint8_t opmenu[cntlr.menubytes];
+
+ trans->opcode = trans->out[0];
+ spi_use_out(trans, 1);
+ if (!ichspi_lock) {
+ /* The lock is off, so just use index 0. */
+ writeb_(trans->opcode, cntlr.opmenu);
+ optypes = readw_(cntlr.optype);
+ optypes = (optypes & 0xfffc) | (trans->type & 0x3);
+ writew_(optypes, cntlr.optype);
+ return 0;
+ } else {
+ /* The lock is on. See if what we need is on the menu. */
+ uint8_t optype;
+ uint16_t opcode_index;
+
+ /* Write Enable is handled as atomic prefix */
+ if (trans->opcode == SPI_OPCODE_WREN)
+ return 0;
+
+ read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
+ for (opcode_index = 0; opcode_index < cntlr.menubytes;
+ opcode_index++) {
+ if (opmenu[opcode_index] == trans->opcode)
+ break;
+ }
+
+ if (opcode_index == cntlr.menubytes) {
+ printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
+ trans->opcode);
+ return -1;
+ }
+
+ optypes = readw_(cntlr.optype);
+ optype = (optypes >> (opcode_index * 2)) & 0x3;
+ if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
+ optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
+ trans->bytesout >= 3) {
+ /* We guessed wrong earlier. Fix it up. */
+ trans->type = optype;
+ }
+ if (optype != trans->type) {
+ printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
+ optype);
+ return -1;
+ }
+ return opcode_index;
+ }
+}
+
+static int spi_setup_offset(spi_transaction *trans)
+{
+ /* Separate the SPI address and data. */
+ switch (trans->type) {
+ case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
+ case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
+ return 0;
+ case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
+ case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
+ trans->offset = ((uint32_t)trans->out[0] << 16) |
+ ((uint32_t)trans->out[1] << 8) |
+ ((uint32_t)trans->out[2] << 0);
+ spi_use_out(trans, 3);
+ return 1;
+ default:
+ printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type);
+ return -1;
+ }
+}
+
+/*
+ * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
+ * below is True) or 0. In case the wait was for the bit(s) to set - write
+ * those bits back, which would cause resetting them.
+ *
+ * Return the last read status value on success or -1 on failure.
+ */
+static int ich_status_poll(u16 bitmask, int wait_til_set)
+{
+ int timeout = 40000; /* This will result in 400 ms */
+ u16 status = 0;
+
+ while (timeout--) {
+ status = readw_(cntlr.status);
+ if (wait_til_set ^ ((status & bitmask) == 0)) {
+ if (wait_til_set)
+ writew_((status & bitmask), cntlr.status);
+ return status;
+ }
+ udelay(10);
+ }
+
+ printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
+ status, bitmask);
+ return -1;
+}
+
+int spi_xfer(struct spi_slave *slave, const void *dout,
+ unsigned int bitsout, void *din, unsigned int bitsin)
+{
+ uint16_t control;
+ int16_t opcode_index;
+ int with_address;
+ int status;
+
+ spi_transaction trans = {
+ dout, bitsout / 8,
+ din, bitsin / 8,
+ 0xff, 0xff, 0
+ };
+
+ /* There has to always at least be an opcode. */
+ if (!bitsout || !dout) {
+ printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
+ return -1;
+ }
+ /* Make sure if we read something we have a place to put it. */
+ if (bitsin != 0 && !din) {
+ printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
+ return -1;
+ }
+ /* Right now we don't support writing partial bytes. */
+ if (bitsout % 8 || bitsin % 8) {
+ printk(BIOS_DEBUG, "ICH SPI: Accessing partial bytes not supported\n");
+ return -1;
+ }
+
+ if (ich_status_poll(SPIS_SCIP, 0) == -1)
+ return -1;
+
+ writew_(SPIS_CDS | SPIS_FCERR, cntlr.status);
+
+ spi_setup_type(&trans);
+ if ((opcode_index = spi_setup_opcode(&trans)) < 0)
+ return -1;
+ if ((with_address = spi_setup_offset(&trans)) < 0)
+ return -1;
+
+ if (!ichspi_lock && trans.opcode == SPI_OPCODE_WREN) {
+ /*
+ * Treat Write Enable as Atomic Pre-Op if possible
+ * in order to prevent the Management Engine from
+ * issuing a transaction between WREN and DATA.
+ */
+ writew_(trans.opcode, cntlr.preop);
+ return 0;
+ }
+
+ /* Preset control fields */
+ control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
+
+ /* Issue atomic preop cycle if needed */
+ if (readw_(cntlr.preop))
+ control |= SPIC_ACS;
+
+ if (!trans.bytesout && !trans.bytesin) {
+ /* SPI addresses are 24 bit only */
+ if (with_address)
+ writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
+
+ /*
+ * This is a 'no data' command (like Write Enable), its
+ * bitesout size was 1, decremented to zero while executing
+ * spi_setup_opcode() above. Tell the chip to send the
+ * command.
+ */
+ writew_(control, cntlr.control);
+
+ /* wait for the result */
+ status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
+ if (status == -1)
+ return -1;
+
+ if (status & SPIS_FCERR) {
+ printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n");
+ return -1;
+ }
+
+ goto spi_xfer_exit;
+ }
+
+ /*
+ * Check if this is a write command attempting to transfer more bytes
+ * than the controller can handle. Iterations for writes are not
+ * supported here because each SPI write command needs to be preceded
+ * and followed by other SPI commands, and this sequence is controlled
+ * by the SPI chip driver.
+ */
+ if (trans.bytesout > cntlr.databytes) {
+ printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use"
+ " CONTROLLER_PAGE_LIMIT?\n");
+ return -1;
+ }
+
+ /*
+ * Read or write up to databytes bytes at a time until everything has
+ * been sent.
+ */
+ while (trans.bytesout || trans.bytesin) {
+ uint32_t data_length;
+
+ /* SPI addresses are 24 bit only */
+ writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
+
+ if (trans.bytesout)
+ data_length = min(trans.bytesout, cntlr.databytes);
+ else
+ data_length = min(trans.bytesin, cntlr.databytes);
+
+ /* Program data into FDATA0 to N */
+ if (trans.bytesout) {
+ write_reg(trans.out, cntlr.data, data_length);
+ spi_use_out(&trans, data_length);
+ if (with_address)
+ trans.offset += data_length;
+ }
+
+ /* Add proper control fields' values */
+ control &= ~((cntlr.databytes - 1) << 8);
+ control |= SPIC_DS;
+ control |= (data_length - 1) << 8;
+
+ /* write it */
+ writew_(control, cntlr.control);
+
+ /* Wait for Cycle Done Status or Flash Cycle Error. */
+ status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
+ if (status == -1)
+ return -1;
+
+ if (status & SPIS_FCERR) {
+ printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
+ return -1;
+ }
+
+ if (trans.bytesin) {
+ read_reg(cntlr.data, trans.in, data_length);
+ spi_use_in(&trans, data_length);
+ if (with_address)
+ trans.offset += data_length;
+ }
+ }
+
+spi_xfer_exit:
+ /* Clear atomic preop now that xfer is done */
+ writew_(0, cntlr.preop);
+
+ return 0;
+}
diff --git a/src/soc/intel/fsp_baytrail/tsc_freq.c b/src/soc/intel/fsp_baytrail/tsc_freq.c
new file mode 100644
index 0000000000..b74e41ea31
--- /dev/null
+++ b/src/soc/intel/fsp_baytrail/tsc_freq.c
@@ -0,0 +1,84 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/tsc.h>
+#include <baytrail/msr.h>
+#if !defined(__PRE_RAM__)
+#include <baytrail/ramstage.h>
+#else
+#include <baytrail/romstage.h>
+#endif
+
+unsigned bus_freq_khz(void)
+{
+ msr_t clk_info = rdmsr(MSR_BSEL_CR_OVERCLOCK_CONTROL);
+ switch (clk_info.lo & 0x3) {
+ case 0:
+ return 83333;
+ case 1:
+ return 100000;
+ case 2:
+ return 133333;
+ case 3:
+ return 116666;
+ default:
+ return 0;
+ }
+}
+
+unsigned long tsc_freq_mhz(void)
+{
+ msr_t platform_info;
+ unsigned bclk_khz = bus_freq_khz();
+
+ if (!bclk_khz)
+ return 0;
+
+ platform_info = rdmsr(MSR_PLATFORM_INFO);
+ return (bclk_khz * ((platform_info.lo >> 8) & 0xff)) / 1000;
+}
+
+#if !defined(__SMM__)
+
+void set_max_freq(void)
+{
+ msr_t perf_ctl;
+ msr_t msr;
+
+ /* Enable speed step. */
+ msr = rdmsr(MSR_IA32_MISC_ENABLES);
+ msr.lo |= (1 << 16);
+ wrmsr(MSR_IA32_MISC_ENABLES, msr);
+
+ /* Set guaranteed ratio [21:16] from IACORE_RATIOS to bits [15:8] of
+ * the PERF_CTL. */
+ msr = rdmsr(MSR_IACORE_RATIOS);
+ perf_ctl.lo = (msr.lo & 0x3f0000) >> 8;
+ /* Set guaranteed vid [21:16] from IACORE_VIDS to bits [7:0] of
+ * the PERF_CTL. */
+ msr = rdmsr(MSR_IACORE_VIDS);
+ perf_ctl.lo |= (msr.lo & 0x7f0000) >> 16;
+ perf_ctl.hi = 0;
+
+ wrmsr(MSR_IA32_PERF_CTL, perf_ctl);
+}
+
+#endif /* __SMM__ */