summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/soc/amd/picasso/chip.h3
-rw-r--r--src/soc/amd/picasso/include/soc/southbridge.h7
-rw-r--r--src/soc/amd/picasso/southbridge.c44
3 files changed, 54 insertions, 0 deletions
diff --git a/src/soc/amd/picasso/chip.h b/src/soc/amd/picasso/chip.h
index b641379605..ac1a12c6b1 100644
--- a/src/soc/amd/picasso/chip.h
+++ b/src/soc/amd/picasso/chip.h
@@ -154,6 +154,9 @@ struct soc_amd_picasso_config {
USB_OC_PIN_5 = 0x5,
USB_OC_NONE = 0xf,
} usb_port_overcurrent_pin[USB_PORT_COUNT];
+
+ /* The array index is the general purpose PCIe clock output number. */
+ enum gpp_clk_req_setting gpp_clk_config[GPP_CLK_OUTPUT_COUNT];
};
typedef struct soc_amd_picasso_config config_t;
diff --git a/src/soc/amd/picasso/include/soc/southbridge.h b/src/soc/amd/picasso/include/soc/southbridge.h
index b5792139da..168b2b2e22 100644
--- a/src/soc/amd/picasso/include/soc/southbridge.h
+++ b/src/soc/amd/picasso/include/soc/southbridge.h
@@ -245,6 +245,13 @@
/* IO 0xf0 NCP Error */
#define NCP_WARM_BOOT BIT(7) /* Write-once */
+/* this is for the devicetree setting and not the values written to the register */
+enum gpp_clk_req_setting {
+ GPP_CLK_ON, /* GPP clock always on; default */
+ GPP_CLK_REQ, /* GPP clock controlled by corresponding #CLK_REQx pin */
+ GPP_CLK_OFF, /* GPP clk off */
+};
+
typedef struct aoac_devs {
unsigned int :7;
unsigned int ic2e:1; /* 7: I2C2 */
diff --git a/src/soc/amd/picasso/southbridge.c b/src/soc/amd/picasso/southbridge.c
index 2a5f822b8f..9772e9bc31 100644
--- a/src/soc/amd/picasso/southbridge.c
+++ b/src/soc/amd/picasso/southbridge.c
@@ -307,6 +307,48 @@ static void al2ahb_clock_gate(void)
write8((void *)(al2ahb_base + AL2AHB_CONTROL_HCLK_OFFSET), al2ahb_val);
}
+/* configure the genral purpose PCIe clock outputs according to the devicetree settings */
+static void gpp_clk_setup(void)
+{
+ const struct soc_amd_picasso_config *cfg = config_of_soc();
+
+ /* look-up table to be able to iterate over the PCIe clock output settings */
+ const uint8_t gpp_clk_shift_lut[GPP_CLK_OUTPUT_COUNT] = {
+ GPP_CLK0_REQ_SHIFT,
+ GPP_CLK1_REQ_SHIFT,
+ GPP_CLK2_REQ_SHIFT,
+ GPP_CLK3_REQ_SHIFT,
+ GPP_CLK4_REQ_SHIFT,
+ GPP_CLK5_REQ_SHIFT,
+ GPP_CLK6_REQ_SHIFT,
+ };
+
+ uint32_t gpp_clk_ctl = misc_read32(GPP_CLK_CNTRL);
+
+ for (int i = 0; i < GPP_CLK_OUTPUT_COUNT; i++) {
+ gpp_clk_ctl &= ~GPP_CLK_REQ_MASK(gpp_clk_shift_lut[i]);
+ /*
+ * The remapping of values is done so that the default of the enum used for the
+ * devicetree settings is the clock being enabled, so that a missing devicetree
+ * configuration for this will result in an always active clock and not an
+ * inactive PCIe clock output.
+ */
+ switch (cfg->gpp_clk_config[i]) {
+ case GPP_CLK_REQ:
+ gpp_clk_ctl |= GPP_CLK_REQ_EXT(gpp_clk_shift_lut[i]);
+ break;
+ case GPP_CLK_OFF:
+ gpp_clk_ctl |= GPP_CLK_REQ_OFF(gpp_clk_shift_lut[i]);
+ break;
+ case GPP_CLK_ON:
+ default:
+ gpp_clk_ctl |= GPP_CLK_REQ_ON(gpp_clk_shift_lut[i]);
+ }
+ }
+
+ misc_write32(GPP_CLK_CNTRL, gpp_clk_ctl);
+}
+
void southbridge_init(void *chip_info)
{
struct chipset_state *state;
@@ -322,6 +364,8 @@ void southbridge_init(void *chip_info)
acpi_clear_pm_gpe_status();
al2ahb_clock_gate();
+
+ gpp_clk_setup();
}
void southbridge_final(void *chip_info)