diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/soc/intel/tigerlake/include/soc/meminit.h | 41 | ||||
-rw-r--r-- | src/soc/intel/tigerlake/meminit.c | 132 |
2 files changed, 172 insertions, 1 deletions
diff --git a/src/soc/intel/tigerlake/include/soc/meminit.h b/src/soc/intel/tigerlake/include/soc/meminit.h index a2fb3f4334..3c4c16b5c2 100644 --- a/src/soc/intel/tigerlake/include/soc/meminit.h +++ b/src/soc/intel/tigerlake/include/soc/meminit.h @@ -87,7 +87,44 @@ struct lpddr4x_cfg { * the array represents DQ pin# on the memory part. */ uint8_t dqs_map[LPDDR4X_CHANNELS][LPDDR4X_BYTES_PER_CHANNEL]; + /* + * Early Command Training Enable/Disable Control + * 1 = enable, 0 = disable + */ + uint8_t ect; +}; +/* Board-specific memory configuration information for DDR4 memory variant */ +struct mb_ddr4_cfg { + /* + * DQ CPU<>DRAM map: + * DDR4 memory interface has 8 DQs per channel. Each DQ consists of 8 bits(1 + * byte). Thus, dq_map is represented as DDR[1-0]_DQ[7-0][7:0], where + * DDR[1-0] : DDR4 channel # + * DQ[7-0] : DQ # within the channel + * [7:0] : Bits within the DQ + * + * Index of the array represents DQ pin# on the CPU, whereas value in + * the array represents DQ pin# on the memory part. + */ + uint8_t dq_map[DDR4_CHANNELS][DDR4_BYTES_PER_CHANNEL][BITS_PER_BYTE]; + /* + * DQS CPU<>DRAM map: + * DDR4 memory interface has 8 DQS pairs per channel. Thus, dqs_map is represented as + * DDR[1-0]_DQS[7-0], where + * DDR[1-0] : DDR4 channel # + * DQS[7-0] : DQS # within the channel + * + * Index of the array represents DQS pin# on the CPU, whereas value in + * the array represents DQS pin# on the memory part. + */ + uint8_t dqs_map[DDR4_CHANNELS][DDR4_BYTES_PER_CHANNEL]; + /* + * Indicates whether memory is interleaved. + * Set to 1 for an interleaved design, + * set to 0 for non-interleaved design. + */ + uint8_t dq_pins_interleaved; /* * Early Command Training Enable/Disable Control * 1 = enable, 0 = disable @@ -97,5 +134,7 @@ struct lpddr4x_cfg { void meminit_lpddr4x(FSP_M_CONFIG *mem_cfg, const struct lpddr4x_cfg *board_cfg, const struct spd_info *spd, bool half_populated); - +/* Initialize DDR4 memory configurations */ +void meminit_ddr4(FSP_M_CONFIG *mem_cfg, const struct mb_ddr4_cfg *board_cfg, + const struct spd_info *spd, const bool half_populated); #endif /* _SOC_TIGERLAKE_MEMINIT_H_ */ diff --git a/src/soc/intel/tigerlake/meminit.c b/src/soc/intel/tigerlake/meminit.c index bd9a4ff45d..7823cfe523 100644 --- a/src/soc/intel/tigerlake/meminit.c +++ b/src/soc/intel/tigerlake/meminit.c @@ -296,3 +296,135 @@ void meminit_lpddr4x(FSP_M_CONFIG *mem_cfg, const struct lpddr4x_cfg *board_cfg, board_cfg->dqs_map[i][1]); } } + +static void read_sodimm_spd(const struct spd_info *info, struct spd_block *blk) +{ + unsigned int i; + + blk->addr_map[0] = info->smbus_info[0].addr_dimm0; + blk->addr_map[1] = info->smbus_info[0].addr_dimm1; + blk->addr_map[2] = info->smbus_info[1].addr_dimm0; + blk->addr_map[3] = info->smbus_info[1].addr_dimm1; + + get_spd_smbus(blk); + + for (i = 0; i < ARRAY_SIZE(blk->addr_map); i++) { + if (blk->addr_map[i]) + print_spd_info((unsigned char *)blk->spd_array[i]); + } +} + +static void ddr4_get_spd(unsigned int channel, const uintptr_t *spd_md_data, + const struct spd_block *spd_sodimm_blk, + const struct spd_info *info, + const bool half_populated, uintptr_t *spd_dimm0, + uintptr_t *spd_dimm1) +{ + if (channel == 0) { + /* For mixed topology, channel 0 can only be Memory_Down */ + if ((info->topology == MEMORY_DOWN) || (info->topology == MIXED)) { + *spd_dimm0 = *spd_md_data; + *spd_dimm1 = 0; + } else if (info->topology == SODIMM) { + *spd_dimm0 = (uintptr_t)spd_sodimm_blk->spd_array[0]; + *spd_dimm1 = (uintptr_t)spd_sodimm_blk->spd_array[1]; + } else + die("Undefined memory topology on Channel 0.\n"); + } else if (channel == 1) { + if (half_populated) { + *spd_dimm0 = *spd_dimm1 = 0; + } else if (info->topology == MEMORY_DOWN) { + *spd_dimm0 = *spd_md_data; + *spd_dimm1 = 0; + /* For mixed topology, channel 1 can only be SODIMM */ + } else if ((info->topology == SODIMM) || (info->topology == MIXED)) { + *spd_dimm0 = (uintptr_t)spd_sodimm_blk->spd_array[2]; + *spd_dimm1 = (uintptr_t)spd_sodimm_blk->spd_array[3]; + } else + die("Undefined memory topology on channel 1.\n"); + } else + die("Unsupported channels.\n"); +} + +/* Initialize DDR4 memory configurations */ +void meminit_ddr4(FSP_M_CONFIG *mem_cfg, const struct mb_ddr4_cfg *board_cfg, + const struct spd_info *info, const bool half_populated) +{ + uintptr_t spd_md_data; + size_t spd_md_len; + uintptr_t spd_dimm0 = 0; + uintptr_t spd_dimm1 = 0; + struct spd_block spd_sodimm_blk; + unsigned int i; + unsigned int index = 0; + + /* Early Command Training Enabled */ + mem_cfg->ECT = board_cfg->ect; + mem_cfg->DqPinsInterleaved = board_cfg->dq_pins_interleaved; + + if ((info->topology == MEMORY_DOWN) || (info->topology == MIXED)) { + read_md_spd(info, &spd_md_data, &spd_md_len); + mem_cfg->MemorySpdDataLen = spd_md_len; + } + + if ((info->topology == SODIMM) || (info->topology == MIXED)) { + read_sodimm_spd(info, &spd_sodimm_blk); + if ((info->topology == MIXED) && + (mem_cfg->MemorySpdDataLen != spd_sodimm_blk.len)) + die("Mixed topology has incorrect length.\n"); + else + mem_cfg->MemorySpdDataLen = spd_sodimm_blk.len; + } + + for (i = 0; i < DDR4_CHANNELS; i++) { + ddr4_get_spd(i, &spd_md_data, &spd_sodimm_blk, info, + half_populated, &spd_dimm0, &spd_dimm1); + init_spd_upds(mem_cfg, i, spd_dimm0, spd_dimm1); + } + + /* + * DDR4 memory interface has 8 DQs per channel. Each DQ consists of 8 bits (1 + * byte). However, FSP UPDs for DQ Map expect a DQ pair (i.e. mapping for 2 bytes) in + * each UPD. + * + * Thus, init_dq_upds() needs to be called for every dq pair of each channel. + * DqMapCpu2DramCh0 --> dq_map[CHAN=0][0-1] + * DqMapCpu2DramCh1 --> dq_map[CHAN=0][2-3] + * DqMapCpu2DramCh2 --> dq_map[CHAN=0][4-5] + * DqMapCpu2DramCh3 --> dq_map[CHAN=0][6-7] + * DqMapCpu2DramCh4 --> dq_map[CHAN=1][0-1] + * DqMapCpu2DramCh5 --> dq_map[CHAN=1][2-3] + * DqMapCpu2DramCh6 --> dq_map[CHAN=1][4-5] + * DqMapCpu2DramCh7 --> dq_map[CHAN=1][6-7] + */ + + /* + * DDR4 memory interface has 8 DQS pairs per channel. FSP UPDs for DQS Map expect a + * pair in each UPD. + * + * Thus, init_dqs_upds() needs to be called for every dqs pair of each channel. + * DqsMapCpu2DramCh0 --> dqs_map[CHAN=0][0-1] + * DqsMapCpu2DramCh1 --> dqs_map[CHAN=0][2-3] + * DqsMapCpu2DramCh2 --> dqs_map[CHAN=0][4-5] + * DqsMapCpu2DramCh3 --> dqs_map[CHAN=0][6-7] + * DqsMapCpu2DramCh4 --> dqs_map[CHAN=1][0-1] + * DqsMapCpu2DramCh5 --> dqs_map[CHAN=1][2-3] + * DqsMapCpu2DramCh6 --> dqs_map[CHAN=1][4-5] + * DqsMapCpu2DramCh7 --> dqs_map[CHAN=1][6-7] + */ + + for (i = 0; i < DDR4_CHANNELS; i++) { + for (int b = 0; b < DDR4_BYTES_PER_CHANNEL; b += 2) { + if (half_populated && (i == 1)) { + init_dq_upds_empty(mem_cfg, index); + init_dqs_upds_empty(mem_cfg, index); + } else { + init_dq_upds(mem_cfg, index, board_cfg->dq_map[i][b], + board_cfg->dq_map[i][b+1]); + init_dqs_upds(mem_cfg, index, board_cfg->dqs_map[i][b], + board_cfg->dqs_map[i][b+1]); + } + index++; + } + } +} |