summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/pcengines/apu2/gpio_ftns.c24
-rw-r--r--src/mainboard/pcengines/apu2/gpio_ftns.h13
-rw-r--r--src/mainboard/pcengines/apu2/romstage.c43
3 files changed, 45 insertions, 35 deletions
diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.c b/src/mainboard/pcengines/apu2/gpio_ftns.c
index 12b8f9464b..58dedffe9d 100644
--- a/src/mainboard/pcengines/apu2/gpio_ftns.c
+++ b/src/mainboard/pcengines/apu2/gpio_ftns.c
@@ -19,19 +19,23 @@
#include "FchPlatform.h"
#include "gpio_ftns.h"
-void configure_gpio(uintptr_t base_addr, u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting)
+void configure_gpio(u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting)
{
- u8 bdata;
- u8 *memptr;
+ u32 bdata;
- memptr = (u8 *)(base_addr + IOMUX_OFFSET + iomux_gpio);
- *memptr = iomux_ftn;
+ bdata = read32((const volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET
+ + gpio));
+ /* out the data value to prevent glitches */
+ bdata |= (setting & GPIO_OUTPUT_ENABLE);
+ write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), bdata);
- memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio);
- bdata = *memptr;
- bdata &= 0x07;
- bdata |= setting; /* set direction and data value */
- *memptr = bdata;
+ /* set direction and data value */
+ bdata |= (setting & (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE
+ | GPIO_PULL_UP_ENABLE | GPIO_PULL_DOWN_ENABLE));
+ write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), bdata);
+
+ write8((volatile void *)(ACPI_MMIO_BASE + IOMUX_OFFSET + iomux_gpio),
+ iomux_ftn & 0x3);
}
int get_spd_offset(void)
diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.h b/src/mainboard/pcengines/apu2/gpio_ftns.h
index e08ee7bcac..05f54148c4 100644
--- a/src/mainboard/pcengines/apu2/gpio_ftns.h
+++ b/src/mainboard/pcengines/apu2/gpio_ftns.h
@@ -16,7 +16,7 @@
#ifndef GPIO_FTNS_H
#define GPIO_FTNS_H
-void configure_gpio(uintptr_t base_addr, u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting);
+void configure_gpio(u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting);
int get_spd_offset(void);
#define IOMUX_OFFSET 0xD00
@@ -27,6 +27,7 @@ int get_spd_offset(void);
// http://www.pcengines.ch/schema/apu2c.pdf
// http://www.pcengines.ch/schema/apu3a.pdf
//
+#define IOMUX_GPIO_22 0x09 // MODESW (APU5)
#define IOMUX_GPIO_32 0x59 // MODESW (SIMSWAP2 on APU5)
#define IOMUX_GPIO_33 0x5A // SIMSWAP (SIMSWAP3 on APU5)
#define IOMUX_GPIO_49 0x40 // STRAP0
@@ -41,6 +42,7 @@ int get_spd_offset(void);
#define IOMUX_GPIO_68 0x48 // PE4_WDIS (SIMSWAP1 on APU5)
#define IOMUX_GPIO_71 0x4D // PROCHOT
+#define GPIO_22 0x24 // MODESW (APU5)
#define GPIO_32 0x164 // MODESW (SIMSWAP2 on APU5)
#define GPIO_33 0x168 // SIMSWAP (SIMSWAP3 on APU5)
#define GPIO_49 0x100 // STRAP0
@@ -55,9 +57,10 @@ int get_spd_offset(void);
#define GPIO_68 0x120 // PE4_WDIS (SIMSWAP1 on APU5)
#define GPIO_71 0x134 // PROCHOT
-#define GPIO_OUTPUT_ENABLE 23
-#define GPIO_OUTPUT_VALUE 22
-#define GPIO_PULL_DOWN_ENABLE 21
-#define GPIO_PULL_UP_ENABLE 20
+#define GPIO_OUTPUT_ENABLE BIT23
+#define GPIO_OUTPUT_VALUE BIT22
+#define GPIO_PULL_DOWN_ENABLE BIT21
+#define GPIO_PULL_UP_ENABLE BIT20
+#define GPIO_PIN_STS BIT16
#endif /* GPIO_FTNS_H */
diff --git a/src/mainboard/pcengines/apu2/romstage.c b/src/mainboard/pcengines/apu2/romstage.c
index e35afc08d6..fec25b4f60 100644
--- a/src/mainboard/pcengines/apu2/romstage.c
+++ b/src/mainboard/pcengines/apu2/romstage.c
@@ -113,42 +113,45 @@ static void early_lpc_init(void)
//
// Configure output disabled, value low, pull up/down disabled
//
+ if (IS_ENABLED(CONFIG_BOARD_PCENGINES_APU5)) {
+ configure_gpio(IOMUX_GPIO_22, Function0, GPIO_22, setting);
+ }
+
if (IS_ENABLED(CONFIG_BOARD_PCENGINES_APU2) ||
IS_ENABLED(CONFIG_BOARD_PCENGINES_APU3) ||
IS_ENABLED(CONFIG_BOARD_PCENGINES_APU4)) {
- configure_gpio(ACPI_MMIO_BASE,
- IOMUX_GPIO_32, Function0, GPIO_32, setting);
+ configure_gpio(IOMUX_GPIO_32, Function0, GPIO_32, setting);
}
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_49, Function2, GPIO_49, setting);
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_50, Function2, GPIO_50, setting);
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_71, Function0, GPIO_71, setting);
+ configure_gpio(IOMUX_GPIO_49, Function2, GPIO_49, setting);
+ configure_gpio(IOMUX_GPIO_50, Function2, GPIO_50, setting);
+ configure_gpio(IOMUX_GPIO_71, Function0, GPIO_71, setting);
+
//
// Configure output enabled, value low, pull up/down disabled
//
- setting = 0x1 << GPIO_OUTPUT_ENABLE;
+ setting = GPIO_OUTPUT_ENABLE;
if (IS_ENABLED(CONFIG_BOARD_PCENGINES_APU3) ||
IS_ENABLED(CONFIG_BOARD_PCENGINES_APU4)) {
- configure_gpio(ACPI_MMIO_BASE,
- IOMUX_GPIO_33, Function0, GPIO_33, setting);
+ configure_gpio(IOMUX_GPIO_33, Function0, GPIO_33, setting);
}
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_57, Function1, GPIO_57, setting);
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_58, Function1, GPIO_58, setting);
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_59, Function3, GPIO_59, setting);
+ configure_gpio(IOMUX_GPIO_57, Function1, GPIO_57, setting);
+ configure_gpio(IOMUX_GPIO_58, Function1, GPIO_58, setting);
+ configure_gpio(IOMUX_GPIO_59, Function3, GPIO_59, setting);
+
//
// Configure output enabled, value high, pull up/down disabled
//
- setting = 0x1 << GPIO_OUTPUT_ENABLE | 0x1 << GPIO_OUTPUT_VALUE;
+ setting = GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE;
+
if (IS_ENABLED(CONFIG_BOARD_PCENGINES_APU5)) {
- configure_gpio(ACPI_MMIO_BASE,
- IOMUX_GPIO_32, Function0, GPIO_32, setting);
- configure_gpio(ACPI_MMIO_BASE,
- IOMUX_GPIO_33, Function0, GPIO_33, setting);
+ configure_gpio(IOMUX_GPIO_32, Function0, GPIO_32, setting);
+ configure_gpio(IOMUX_GPIO_33, Function0, GPIO_33, setting);
}
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_51, Function2, GPIO_51, setting);
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_55, Function3, GPIO_55, setting);
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_64, Function2, GPIO_64, setting);
- configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_68, Function0, GPIO_68, setting);
+ configure_gpio(IOMUX_GPIO_51, Function2, GPIO_51, setting);
+ configure_gpio(IOMUX_GPIO_55, Function3, GPIO_55, setting);
+ configure_gpio(IOMUX_GPIO_64, Function2, GPIO_64, setting);
+ configure_gpio(IOMUX_GPIO_68, Function0, GPIO_68, setting);
}