summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/google/gru/mainboard.c33
1 files changed, 33 insertions, 0 deletions
diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c
index b7a197ee8b..4a5ed4f687 100644
--- a/src/mainboard/google/gru/mainboard.c
+++ b/src/mainboard/google/gru/mainboard.c
@@ -33,6 +33,39 @@ static void configure_sdmmc(void)
gpio_output(GPIO(2, D, 4), 0); /* Keep the max voltage */
+ /*
+ * The SD card on this board is connected to port SDMMC0, which is
+ * multiplexed with GPIO4B pins 0..5.
+ *
+ * Disable all pullups on these pins. For pullup configuration
+ * register layout stacks banks 2 through 4 together, hence [2] means
+ * group 4, [1] means bank B. This register is described on page 342
+ * of section 1 of the TRM.
+ *
+ * Each GPIO pin's pull config takes two bits, writing zero to the
+ * field disables pull ups/downs, as described on page 342 of rk3399
+ * TRM Version 0.3 Part 1.
+ */
+ write32(&rk3399_grf->gpio2_p[2][1], RK_CLRSETBITS(0xfff, 0));
+
+ /*
+ * Set all outputs' drive strength to 8 mA. Group 4 bank B driver
+ * strength requires three bits per pin. Value of 2 written in that
+ * three bit field means '8 mA', as deduced from the kernel code.
+ *
+ * Thus the six pins involved in SDMMC interface require 18 bits to
+ * configure drive strength, but each 32 bit register provides only 16
+ * bits for this setting, this covers 5 pins fully and one bit from
+ * the 6th pin. Two more bits spill over to the next register. This is
+ * described on page 378 of rk3399 TRM Version 0.3 Part 1.
+ */
+ write32(&rk3399_grf->gpio4b_e01,
+ RK_CLRSETBITS(0xffff,
+ (2 << 0) | (2 << 3) |
+ (2 << 6) | (2 << 9) | (2 << 12)));
+ write32(&rk3399_grf->gpio4b_e2, RK_CLRSETBITS(3, 1));
+
+ /* And now set the multiplexor to enable SDMMC0. */
write32(&rk3399_grf->iomux_sdmmc, IOMUX_SDMMC);
}