summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/security/vboot/Kconfig12
-rw-r--r--src/security/vboot/Makefile.inc2
-rw-r--r--src/security/vboot/ec_sync.c549
-rw-r--r--src/security/vboot/vboot_common.h9
-rw-r--r--src/security/vboot/vboot_logic.c30
5 files changed, 590 insertions, 12 deletions
diff --git a/src/security/vboot/Kconfig b/src/security/vboot/Kconfig
index 89e12323b6..df1b7e478a 100644
--- a/src/security/vboot/Kconfig
+++ b/src/security/vboot/Kconfig
@@ -242,6 +242,18 @@ config VBOOT_ENABLE_CBFS_FALLBACK
When this option is enabled cbfs_boot_locate will look for a file in the RO
(COREBOOT) region if it isn't available in the active RW region.
+config VBOOT_EARLY_EC_SYNC
+ bool
+ default n
+ depends on EC_GOOGLE_CHROMEEC
+ help
+ Enables CrOS EC software sync in romstage, before memory training
+ runs. This is useful mainly as a way to achieve full USB-PD
+ negotiation earlier in the boot flow, as the EC will only do this once
+ it has made the sysjump to its RW firmware. It should not
+ significantly impact boot time, as this operation will be performed
+ later in the boot flow if it is disabled here.
+
menu "GBB configuration"
config GBB_HWID
diff --git a/src/security/vboot/Makefile.inc b/src/security/vboot/Makefile.inc
index 3e5956cb10..87cd91cbf6 100644
--- a/src/security/vboot/Makefile.inc
+++ b/src/security/vboot/Makefile.inc
@@ -37,6 +37,8 @@ verstage-y += vbnv.c
romstage-y += vbnv.c
ramstage-y += vbnv.c
+romstage-$(CONFIG_VBOOT_EARLY_EC_SYNC) += ec_sync.c
+
bootblock-$(CONFIG_VBOOT_VBNV_CMOS) += vbnv_cmos.c
verstage-$(CONFIG_VBOOT_VBNV_CMOS) += vbnv_cmos.c
romstage-$(CONFIG_VBOOT_VBNV_CMOS) += vbnv_cmos.c
diff --git a/src/security/vboot/ec_sync.c b/src/security/vboot/ec_sync.c
new file mode 100644
index 0000000000..ec048aa91c
--- /dev/null
+++ b/src/security/vboot/ec_sync.c
@@ -0,0 +1,549 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <assert.h>
+#include <cbfs.h>
+#include <console/console.h>
+#include <delay.h>
+#include <ec/google/chromeec/ec.h>
+#include <security/vboot/misc.h>
+#include <security/vboot/vbnv.h>
+#include <security/vboot/vboot_common.h>
+#include <timer.h>
+#include <vb2_api.h>
+
+#define _EC_FILENAME(select, suffix) \
+ (select == VB_SELECT_FIRMWARE_READONLY ? "ecro" suffix : "ecrw" suffix)
+#define EC_IMAGE_FILENAME(select) _EC_FILENAME(select, "")
+#define EC_HASH_FILENAME(select) _EC_FILENAME(select, ".hash")
+
+/* Wait 10 ms between attempts to check if EC's hash is ready */
+#define CROS_EC_HASH_CHECK_DELAY_MS 10
+/* Give the EC 2 seconds to finish calculating its hash */
+#define CROS_EC_HASH_TIMEOUT_MS 2000
+
+/* Wait 3 seconds after software sync for EC to clear the limit power flag. */
+#define LIMIT_POWER_WAIT_TIMEOUT_MS 3000
+/* Check the limit power flag every 10 ms while waiting. */
+#define LIMIT_POWER_POLL_SLEEP_MS 10
+
+/* Wait 3 seconds for EC to sysjump to RW */
+#define CROS_EC_SYSJUMP_TIMEOUT_MS 3000
+
+/*
+ * The external API for EC software sync. This function calls into
+ * vboot, which kicks off the process. Vboot runs the verified boot
+ * logic, and requires the client program to provide callbacks which
+ * perform the work.
+ */
+void vboot_sync_ec(void)
+{
+ vb2_error_t retval = VB2_SUCCESS;
+ struct vb2_context *ctx;
+
+ ctx = vboot_get_context();
+ ctx->flags |= VB2_CONTEXT_EC_SYNC_SUPPORTED;
+
+ retval = vb2api_ec_sync(ctx);
+ vboot_save_nvdata_only(ctx);
+
+ if (retval != VB2_SUCCESS) {
+ printk(BIOS_ERR, "EC software sync failed (%#x), rebooting\n", retval);
+ vboot_reboot();
+ }
+}
+
+/* Convert firmware image type into a flash offset */
+static uint32_t get_vboot_hash_offset(enum vb2_firmware_selection select)
+{
+ switch (select) {
+ case VB_SELECT_FIRMWARE_READONLY:
+ return EC_VBOOT_HASH_OFFSET_RO;
+ case VB_SELECT_FIRMWARE_EC_UPDATE:
+ return EC_VBOOT_HASH_OFFSET_UPDATE;
+ default:
+ return EC_VBOOT_HASH_OFFSET_ACTIVE;
+ }
+}
+
+/*
+ * Asks the EC to calculate a hash of the specified firmware image, and
+ * returns the information in **hash and *hash_size.
+ */
+static vb2_error_t ec_hash_image(enum vb2_firmware_selection select,
+ const uint8_t **hash, int *hash_size)
+{
+ static struct ec_response_vboot_hash resp;
+ uint32_t hash_offset;
+ int recalc_requested = 0;
+ struct stopwatch sw;
+
+ hash_offset = get_vboot_hash_offset(select);
+
+ stopwatch_init_msecs_expire(&sw, CROS_EC_HASH_TIMEOUT_MS);
+ do {
+ if (google_chromeec_get_vboot_hash(hash_offset, &resp))
+ return VB2_ERROR_UNKNOWN;
+
+ switch (resp.status) {
+ case EC_VBOOT_HASH_STATUS_NONE:
+ /*
+ * There is no hash available right now.
+ * Request a recalc if it hasn't been done yet.
+ */
+ if (recalc_requested)
+ break;
+
+ printk(BIOS_WARNING,
+ "%s: No valid hash (status=%d size=%d). "
+ "Computing...\n", __func__, resp.status,
+ resp.size);
+
+ if (google_chromeec_start_vboot_hash(
+ EC_VBOOT_HASH_TYPE_SHA256, hash_offset, &resp))
+ return VB2_ERROR_UNKNOWN;
+
+ recalc_requested = 1;
+
+ /*
+ * Expect status to be busy since we just sent
+ * a recalc request.
+ */
+ resp.status = EC_VBOOT_HASH_STATUS_BUSY;
+
+ /* Hash just started calculating, let it go for a bit */
+ mdelay(CROS_EC_HASH_CHECK_DELAY_MS);
+ break;
+
+ case EC_VBOOT_HASH_STATUS_BUSY:
+ /* Hash is still calculating. */
+ mdelay(CROS_EC_HASH_CHECK_DELAY_MS);
+ break;
+
+ case EC_VBOOT_HASH_STATUS_DONE: /* intentional fallthrough */
+ default:
+ /* Hash is ready! */
+ break;
+ }
+ } while (resp.status == EC_VBOOT_HASH_STATUS_BUSY &&
+ !stopwatch_expired(&sw));
+
+ if (resp.status != EC_VBOOT_HASH_STATUS_DONE) {
+ printk(BIOS_ERR, "%s: Hash status not done: %d\n", __func__,
+ resp.status);
+ return VB2_ERROR_UNKNOWN;
+ }
+ if (resp.hash_type != EC_VBOOT_HASH_TYPE_SHA256) {
+ printk(BIOS_ERR, "EC hash was the wrong type.\n");
+ return VB2_ERROR_UNKNOWN;
+ }
+
+ printk(BIOS_INFO, "EC took %luus to calculate image hash\n",
+ stopwatch_duration_usecs(&sw));
+
+ *hash = resp.hash_digest;
+ *hash_size = resp.digest_size;
+
+ return VB2_SUCCESS;
+}
+
+/*
+ * Asks the EC to protect or unprotect the specified flash region.
+ */
+static vb2_error_t ec_protect_flash(enum vb2_firmware_selection select, int enable)
+{
+ struct ec_response_flash_protect resp;
+ uint32_t protected_region = EC_FLASH_PROTECT_ALL_NOW;
+ const uint32_t mask = EC_FLASH_PROTECT_ALL_NOW | EC_FLASH_PROTECT_ALL_AT_BOOT;
+
+ if (select == VB_SELECT_FIRMWARE_READONLY)
+ protected_region = EC_FLASH_PROTECT_RO_NOW;
+
+ if (google_chromeec_flash_protect(mask, enable ? mask : 0, &resp) != 0)
+ return VB2_ERROR_UNKNOWN;
+
+ if (!enable) {
+ /* If protection is still enabled, need reboot */
+ if (resp.flags & protected_region)
+ return VBERROR_EC_REBOOT_TO_RO_REQUIRED;
+
+ return VB2_SUCCESS;
+ }
+
+ /*
+ * If write protect and ro-at-boot aren't both asserted, don't expect
+ * protection enabled.
+ */
+ if ((~resp.flags) & (EC_FLASH_PROTECT_GPIO_ASSERTED |
+ EC_FLASH_PROTECT_RO_AT_BOOT))
+ return VB2_SUCCESS;
+
+ /* If flash is protected now, success */
+ if (resp.flags & EC_FLASH_PROTECT_ALL_NOW)
+ return VB2_SUCCESS;
+
+ /* If RW will be protected at boot but not now, need a reboot */
+ if (resp.flags & EC_FLASH_PROTECT_ALL_AT_BOOT)
+ return VBERROR_EC_REBOOT_TO_RO_REQUIRED;
+
+ /* Otherwise, it's an error */
+ return VB2_ERROR_UNKNOWN;
+}
+
+/* Convert a firmware image type to an EC flash region */
+static enum ec_flash_region vboot_to_ec_region(enum vb2_firmware_selection select)
+{
+ switch (select) {
+ case VB_SELECT_FIRMWARE_READONLY:
+ return EC_FLASH_REGION_WP_RO;
+ case VB_SELECT_FIRMWARE_EC_UPDATE:
+ return EC_FLASH_REGION_UPDATE;
+ default:
+ return EC_FLASH_REGION_ACTIVE;
+ }
+}
+
+/*
+ * Read the EC's burst size bytes at a time from CBFS, and then send
+ * the chunk to the EC for it to write into its flash.
+ */
+static vb2_error_t ec_flash_write(struct region_device *image_region,
+ uint32_t region_offset, int image_size)
+{
+ struct ec_response_get_protocol_info resp_proto;
+ struct ec_response_flash_info resp_flash;
+ ssize_t pdata_max_size;
+ ssize_t burst;
+ uint8_t *file_buf;
+ struct ec_params_flash_write *params;
+ uint32_t end, off;
+
+ /*
+ * Get EC's protocol information, so that we can figure out how much
+ * data can be sent in one message.
+ */
+ if (google_chromeec_get_protocol_info(&resp_proto)) {
+ printk(BIOS_ERR, "Failed to get EC protocol information; "
+ "skipping flash write\n");
+ return VB2_ERROR_UNKNOWN;
+ }
+
+ /*
+ * Determine burst size. This must be a multiple of the write block
+ * size, and must also fit into the host parameter buffer.
+ */
+ if (google_chromeec_flash_info(&resp_flash)) {
+ printk(BIOS_ERR, "Failed to get EC flash information; "
+ "skipping flash write\n");
+ return VB2_ERROR_UNKNOWN;
+ }
+
+ /* Limit the potential buffer stack allocation to 1K */
+ pdata_max_size = MIN(1024, resp_proto.max_request_packet_size -
+ sizeof(struct ec_host_request));
+
+ /* Round burst to a multiple of the flash write block size */
+ burst = pdata_max_size - sizeof(*params);
+ burst = (burst / resp_flash.write_block_size) *
+ resp_flash.write_block_size;
+
+ /* Buffer too small */
+ if (burst <= 0) {
+ printk(BIOS_ERR, "Flash write buffer too small! skipping "
+ "flash write\n");
+ return VB2_ERROR_UNKNOWN;
+ }
+
+ /* Allocate buffer on the stack */
+ params = alloca(burst + sizeof(*params));
+
+ /* Fill up the buffer */
+ end = region_offset + image_size;
+ for (off = region_offset; off < end; off += burst) {
+ uint32_t todo = MIN(end - off, burst);
+ uint32_t xfer_size = todo + sizeof(*params);
+
+ /* Map 'todo' bytes into memory */
+ file_buf = rdev_mmap(image_region, off - region_offset, todo);
+ if (file_buf == NULL)
+ return VB2_ERROR_UNKNOWN;
+
+ params->offset = off;
+ params->size = todo;
+
+ /* Read todo bytes into the buffer */
+ memcpy(params + 1, file_buf, todo);
+
+ if (rdev_munmap(image_region, file_buf))
+ return VB2_ERROR_UNKNOWN;
+
+ /* Make sure to add back in the size of the parameters */
+ if (google_chromeec_flash_write_block(
+ (const uint8_t *)params, xfer_size)) {
+ printk(BIOS_ERR, "EC failed flash write command, "
+ "relative offset %u!\n", off - region_offset);
+ return VB2_ERROR_UNKNOWN;
+ }
+ }
+
+ return VB2_SUCCESS;
+}
+
+/*
+ * The logic for updating an EC firmware image.
+ */
+static vb2_error_t ec_update_image(enum vb2_firmware_selection select)
+{
+ uint32_t region_offset, region_size;
+ enum ec_flash_region region;
+ vb2_error_t rv;
+ size_t image_size;
+ struct cbfsf fh;
+ const char *filename;
+ struct region_device image_region;
+
+ /* Un-protect the flash region */
+ rv = ec_protect_flash(select, 0);
+ if (rv != VB2_SUCCESS)
+ return rv;
+
+ /* Convert vboot region into an EC region */
+ region = vboot_to_ec_region(select);
+
+ /* Get information about the flash region */
+ if (google_chromeec_flash_region_info(region, &region_offset,
+ &region_size))
+ return VB2_ERROR_UNKNOWN;
+
+ /* Locate the CBFS file */
+ filename = EC_IMAGE_FILENAME(select);
+ if (cbfs_boot_locate(&fh, filename, NULL))
+ return VB2_ERROR_UNKNOWN;
+
+ /* Get the file size and the region struct */
+ image_size = region_device_sz(&fh.data);
+ cbfs_file_data(&image_region, &fh);
+
+ /* Bail if the image is too large */
+ if (image_size > region_size)
+ return VB2_ERROR_INVALID_PARAMETER;
+
+ /* Erase the region */
+ if (google_chromeec_flash_erase(region_offset, region_size))
+ return VB2_ERROR_UNKNOWN;
+
+ /* Write the image into the region */
+ if (ec_flash_write(&image_region, region_offset, image_size))
+ return VB2_ERROR_UNKNOWN;
+
+ /* Verify the image */
+ if (google_chromeec_efs_verify(region))
+ return VB2_ERROR_UNKNOWN;
+
+ return VB2_SUCCESS;
+}
+
+static vb2_error_t ec_get_expected_hash(enum vb2_firmware_selection select,
+ const uint8_t **hash,
+ int *hash_size)
+{
+ size_t size;
+ const char *filename = EC_HASH_FILENAME(select);
+ const uint8_t *file = cbfs_boot_map_with_leak(filename, CBFS_TYPE_RAW, &size);
+
+ if (file == NULL)
+ return VB2_ERROR_UNKNOWN;
+
+ *hash = file;
+ *hash_size = (int)size;
+
+ return VB2_SUCCESS;
+}
+
+/***********************************************************************
+ * Vboot Callbacks
+ ***********************************************************************/
+
+/*
+ * Unsupported.
+ *
+ * coreboot does not support the graphics initialization needed to
+ * display the vboot "wait" screens, etc., because the use case for
+ * supporting software sync early in the boot flow is to be able to
+ * quickly update the EC and/or sysjump to RW earlier so that USB-PD
+ * power (> 15 W) can be negotiated for earlier.
+ */
+vb2_error_t VbExDisplayScreen(uint32_t screen_type, uint32_t locale,
+ const VbScreenData *data)
+{
+ return VB2_ERROR_UNKNOWN;
+}
+
+/*
+ * Write opaque data into NV storage region.
+ */
+vb2_error_t VbExNvStorageWrite(const uint8_t *buf)
+{
+ save_vbnv(buf);
+ return VB2_SUCCESS;
+}
+
+/*
+ * Report whether the EC is in RW or not.
+ */
+vb2_error_t vb2ex_ec_running_rw(int *in_rw)
+{
+ *in_rw = !google_ec_running_ro();
+ return VB2_SUCCESS;
+}
+
+/*
+ * Callback for when Vboot is finished.
+ */
+vb2_error_t vb2ex_ec_vboot_done(struct vb2_context *ctx)
+{
+ int limit_power = 0;
+ bool message_printed = false;
+ struct stopwatch sw;
+ vb2_error_t rv = VB2_SUCCESS;
+ int in_recovery = !!(ctx->flags & VB2_CONTEXT_RECOVERY_MODE);
+
+ /*
+ * Do not wait for the limit power flag to be cleared in
+ * recovery mode since we didn't just sysjump.
+ */
+ if (in_recovery)
+ return VB2_SUCCESS;
+
+ stopwatch_init_msecs_expire(&sw, LIMIT_POWER_WAIT_TIMEOUT_MS);
+
+ /* Ensure we have enough power to continue booting */
+ while (1) {
+ if (google_chromeec_read_limit_power_request(&limit_power)) {
+ printk(BIOS_ERR, "Failed to check EC limit power"
+ "flag.\n");
+ rv = VB2_ERROR_UNKNOWN;
+ break;
+ }
+
+ if (!limit_power || stopwatch_expired(&sw))
+ break;
+
+ if (!message_printed) {
+ printk(BIOS_SPEW,
+ "Waiting for EC to clear limit power flag.\n");
+ message_printed = true;
+ }
+
+ mdelay(LIMIT_POWER_POLL_SLEEP_MS);
+ }
+
+ if (limit_power) {
+ printk(BIOS_INFO,
+ "EC requests limited power usage. Request shutdown.\n");
+ rv = VBERROR_SHUTDOWN_REQUESTED;
+ } else {
+ printk(BIOS_INFO, "Waited %luus to clear limit power flag.\n",
+ stopwatch_duration_usecs(&sw));
+ }
+
+ return rv;
+}
+
+/*
+ * Support battery cutoff if required.
+ */
+vb2_error_t vb2ex_ec_battery_cutoff(void)
+{
+ if (google_chromeec_battery_cutoff(EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN))
+ return VB2_ERROR_UNKNOWN;
+
+ return VB2_SUCCESS;
+}
+
+/*
+ * Vboot callback for calculating an EC image's hash.
+ */
+vb2_error_t vb2ex_ec_hash_image(enum vb2_firmware_selection select,
+ const uint8_t **hash, int *hash_size)
+{
+ return ec_hash_image(select, hash, hash_size);
+}
+
+/*
+ * Vboot callback for EC flash protection.
+ */
+vb2_error_t vb2ex_ec_protect(enum vb2_firmware_selection select)
+{
+ return ec_protect_flash(select, 1);
+}
+
+/*
+ * Get hash for image.
+ */
+vb2_error_t vb2ex_ec_get_expected_image_hash(enum vb2_firmware_selection select,
+ const uint8_t **hash,
+ int *hash_size)
+{
+ return ec_get_expected_hash(select, hash, hash_size);
+}
+
+/*
+ * Disable further sysjumps (i.e., stay in RW until next reboot)
+ */
+vb2_error_t vb2ex_ec_disable_jump(void)
+{
+ if (google_chromeec_reboot(0, EC_REBOOT_DISABLE_JUMP, 0))
+ return VB2_ERROR_UNKNOWN;
+
+ return VB2_SUCCESS;
+}
+
+/*
+ * Update EC image.
+ */
+vb2_error_t vb2ex_ec_update_image(enum vb2_firmware_selection select)
+{
+ return ec_update_image(select);
+}
+
+/*
+ * Vboot callback for commanding EC to sysjump to RW.
+ */
+vb2_error_t vb2ex_ec_jump_to_rw(void)
+{
+ struct stopwatch sw;
+
+ if (google_chromeec_reboot(0, EC_REBOOT_JUMP_RW, 0))
+ return VB2_ERROR_UNKNOWN;
+
+ /* Give the EC 3 seconds to sysjump */
+ stopwatch_init_msecs_expire(&sw, CROS_EC_SYSJUMP_TIMEOUT_MS);
+
+ /* Default delay to wait after EC reboot */
+ mdelay(50);
+ while (google_chromeec_hello()) {
+ if (stopwatch_expired(&sw)) {
+ printk(BIOS_ERR, "EC did not return from reboot after %luus\n",
+ stopwatch_duration_usecs(&sw));
+ return VB2_ERROR_UNKNOWN;
+ }
+
+ mdelay(5);
+ }
+
+ printk(BIOS_INFO, "\nEC returned from reboot after %luus\n",
+ stopwatch_duration_usecs(&sw));
+
+ return VB2_SUCCESS;
+}
diff --git a/src/security/vboot/vboot_common.h b/src/security/vboot/vboot_common.h
index a20ab62bd4..d296574eaf 100644
--- a/src/security/vboot/vboot_common.h
+++ b/src/security/vboot/vboot_common.h
@@ -80,4 +80,13 @@ static inline int vboot_can_enable_udc(void) { return 1; }
static inline void vboot_run_logic(void) {}
#endif
+void vboot_save_nvdata_only(struct vb2_context *ctx);
+void vboot_save_data(struct vb2_context *ctx);
+
+/*
+ * The API for performing EC software sync. Does not support
+ * "slow" updates or Auxiliary FW sync.
+ */
+void vboot_sync_ec(void);
+
#endif /* __VBOOT_VBOOT_COMMON_H__ */
diff --git a/src/security/vboot/vboot_logic.c b/src/security/vboot/vboot_logic.c
index 6ee4d948f3..ccce148882 100644
--- a/src/security/vboot/vboot_logic.c
+++ b/src/security/vboot/vboot_logic.c
@@ -251,21 +251,27 @@ static vb2_error_t hash_body(struct vb2_context *ctx,
return VB2_SUCCESS;
}
-/**
- * Save non-volatile and/or secure data if needed.
- */
-static void save_if_needed(struct vb2_context *ctx)
+void vboot_save_nvdata_only(struct vb2_context *ctx)
{
+ assert(!(ctx->flags & (VB2_CONTEXT_SECDATA_FIRMWARE_CHANGED |
+ VB2_CONTEXT_SECDATA_KERNEL_CHANGED)));
+
if (ctx->flags & VB2_CONTEXT_NVDATA_CHANGED) {
printk(BIOS_INFO, "Saving nvdata\n");
save_vbnv(ctx->nvdata);
ctx->flags &= ~VB2_CONTEXT_NVDATA_CHANGED;
}
+}
+
+void vboot_save_data(struct vb2_context *ctx)
+{
if (ctx->flags & VB2_CONTEXT_SECDATA_CHANGED) {
printk(BIOS_INFO, "Saving secdata\n");
antirollback_write_space_firmware(ctx);
ctx->flags &= ~VB2_CONTEXT_SECDATA_CHANGED;
}
+
+ vboot_save_nvdata_only(ctx);
}
static uint32_t extend_pcrs(struct vb2_context *ctx)
@@ -368,13 +374,13 @@ void verstage_main(void)
*/
if (rv == VB2_ERROR_API_PHASE1_RECOVERY) {
printk(BIOS_INFO, "Recovery requested (%x)\n", rv);
- save_if_needed(ctx);
+ vboot_save_data(ctx);
extend_pcrs(ctx); /* ignore failures */
goto verstage_main_exit;
}
printk(BIOS_INFO, "Reboot requested (%x)\n", rv);
- save_if_needed(ctx);
+ vboot_save_data(ctx);
vboot_reboot();
}
@@ -383,7 +389,7 @@ void verstage_main(void)
rv = vb2api_fw_phase2(ctx);
if (rv) {
printk(BIOS_INFO, "Reboot requested (%x)\n", rv);
- save_if_needed(ctx);
+ vboot_save_data(ctx);
vboot_reboot();
}
@@ -394,7 +400,7 @@ void verstage_main(void)
timestamp_add_now(TS_END_VERIFY_SLOT);
if (rv) {
printk(BIOS_INFO, "Reboot requested (%x)\n", rv);
- save_if_needed(ctx);
+ vboot_save_data(ctx);
vboot_reboot();
}
@@ -405,7 +411,7 @@ void verstage_main(void)
"Failed to read FMAP to locate firmware");
rv = hash_body(ctx, &fw_main);
- save_if_needed(ctx);
+ vboot_save_data(ctx);
if (rv) {
printk(BIOS_INFO, "Reboot requested (%x)\n", rv);
vboot_reboot();
@@ -419,7 +425,7 @@ void verstage_main(void)
printk(BIOS_WARNING,
"Failed to extend TPM PCRs (%#x)\n", rv);
vb2api_fail(ctx, VB2_RECOVERY_RO_TPM_U_ERROR, rv);
- save_if_needed(ctx);
+ vboot_save_data(ctx);
vboot_reboot();
}
timestamp_add_now(TS_END_TPMPCR);
@@ -432,7 +438,7 @@ void verstage_main(void)
if (rv) {
printk(BIOS_INFO, "Failed to lock TPM (%x)\n", rv);
vb2api_fail(ctx, VB2_RECOVERY_RO_TPM_L_ERROR, 0);
- save_if_needed(ctx);
+ vboot_save_data(ctx);
vboot_reboot();
}
timestamp_add_now(TS_END_TPMLOCK);
@@ -445,7 +451,7 @@ void verstage_main(void)
rv);
vb2api_fail(ctx, VB2_RECOVERY_RO_TPM_REC_HASH_L_ERROR,
0);
- save_if_needed(ctx);
+ vboot_save_data(ctx);
vboot_reboot();
}
}