summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/soc/intel/braswell/acpi.c6
-rw-r--r--src/soc/intel/braswell/chip.h2
-rw-r--r--src/soc/intel/braswell/cpu.c3
-rw-r--r--src/soc/intel/braswell/lpe.c4
-rw-r--r--src/soc/intel/braswell/southcluster.c1
-rw-r--r--src/soc/intel/braswell/spi.c68
-rw-r--r--src/soc/intel/braswell/tsc_freq.c7
-rw-r--r--src/soc/intel/braswell/xhci.c3
8 files changed, 45 insertions, 49 deletions
diff --git a/src/soc/intel/braswell/acpi.c b/src/soc/intel/braswell/acpi.c
index 163d7a9eea..0acb90ce7b 100644
--- a/src/soc/intel/braswell/acpi.c
+++ b/src/soc/intel/braswell/acpi.c
@@ -525,12 +525,10 @@ void southcluster_inject_dsdt(device_t device)
if (gnvs) {
acpi_create_gnvs(gnvs);
/* Fill in the Wifi Region id */
- if (IS_ENABLED(CONFIG_HAVE_REGULATORY_DOMAIN)) {
+ if (IS_ENABLED(CONFIG_HAVE_REGULATORY_DOMAIN))
gnvs->cid1 = wifi_regulatory_domain();
- } else {
-
+ else
gnvs->cid1 = WRDD_DEFAULT_REGULATORY_DOMAIN;
- }
acpi_save_gnvs((unsigned long)gnvs);
/* And tell SMI about it */
smm_setup_structures(gnvs, NULL, NULL);
diff --git a/src/soc/intel/braswell/chip.h b/src/soc/intel/braswell/chip.h
index fc57a6a95d..8c3f143b46 100644
--- a/src/soc/intel/braswell/chip.h
+++ b/src/soc/intel/braswell/chip.h
@@ -58,7 +58,7 @@ struct soc_intel_braswell_config {
int disable_slp_x_stretch_sus_fail;
/* LPE Audio Clock configuration. */
- enum lpe_clk_src lpe_codec_clk_src; /* 0=xtal 1=PLL, Both are 19.2Mhz. */
+ enum lpe_clk_src lpe_codec_clk_src; /* 0=xtal 1=PLL, Both are 19.2Mhz */
/* Native SD Card controller - override controller capabilities. */
uint32_t sdcard_cap_low;
diff --git a/src/soc/intel/braswell/cpu.c b/src/soc/intel/braswell/cpu.c
index aae553cbc9..96c823a537 100644
--- a/src/soc/intel/braswell/cpu.c
+++ b/src/soc/intel/braswell/cpu.c
@@ -229,7 +229,6 @@ void soc_init_cpus(device_t dev)
printk(BIOS_SPEW, "%s/%s ( %s )\n",
__FILE__, __func__, dev_name(dev));
- if (mp_init_with_smm(cpu_bus, &mp_ops)) {
+ if (mp_init_with_smm(cpu_bus, &mp_ops))
printk(BIOS_ERR, "MP initialization failure.\n");
- }
}
diff --git a/src/soc/intel/braswell/lpe.c b/src/soc/intel/braswell/lpe.c
index 40bda1252c..58b5a8d77f 100644
--- a/src/soc/intel/braswell/lpe.c
+++ b/src/soc/intel/braswell/lpe.c
@@ -142,9 +142,9 @@ static void lpe_stash_firmware_info(device_t dev)
/* Also put the address in MMIO space like on C0 BTM */
mmio = find_resource(dev, PCI_BASE_ADDRESS_0);
- write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0), \
+ write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0),
res->base);
- write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0), \
+ write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0),
res->size);
}
diff --git a/src/soc/intel/braswell/southcluster.c b/src/soc/intel/braswell/southcluster.c
index 4e4d157714..1c450e98b0 100644
--- a/src/soc/intel/braswell/southcluster.c
+++ b/src/soc/intel/braswell/southcluster.c
@@ -390,7 +390,6 @@ static int place_device_in_d3hot(device_t dev)
DEV_CASE(TXE) :
/* TXE cannot be placed in D3Hot. */
return 0;
- break;
DEV_CASE(PCIE_PORT1) :
DEV_CASE(PCIE_PORT2) :
DEV_CASE(PCIE_PORT3) :
diff --git a/src/soc/intel/braswell/spi.c b/src/soc/intel/braswell/spi.c
index 514e70e418..5121be016b 100644
--- a/src/soc/intel/braswell/spi.c
+++ b/src/soc/intel/braswell/spi.c
@@ -350,43 +350,43 @@ static int spi_setup_opcode(spi_transaction *trans)
optypes = (optypes & 0xfffc) | (trans->type & 0x3);
writew_(optypes, cntlr.optype);
return 0;
- } else {
- /* The lock is on. See if what we need is on the menu. */
- uint8_t optype;
- uint16_t opcode_index;
-
- /* Write Enable is handled as atomic prefix */
- if (trans->opcode == SPI_OPCODE_WREN)
- return 0;
-
- read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
- for (opcode_index = 0; opcode_index < cntlr.menubytes;
- opcode_index++) {
- if (opmenu[opcode_index] == trans->opcode)
- break;
- }
+ }
- if (opcode_index == cntlr.menubytes) {
- printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
- trans->opcode);
- return -1;
- }
+ /* The lock is on. See if what we need is on the menu. */
+ uint8_t optype;
+ uint16_t opcode_index;
- optypes = readw_(cntlr.optype);
- optype = (optypes >> (opcode_index * 2)) & 0x3;
- if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
- optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
- trans->bytesout >= 3) {
- /* We guessed wrong earlier. Fix it up. */
- trans->type = optype;
- }
- if (optype != trans->type) {
- printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
- optype);
- return -1;
- }
- return opcode_index;
+ /* Write Enable is handled as atomic prefix */
+ if (trans->opcode == SPI_OPCODE_WREN)
+ return 0;
+
+ read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
+ for (opcode_index = 0; opcode_index < cntlr.menubytes;
+ opcode_index++) {
+ if (opmenu[opcode_index] == trans->opcode)
+ break;
+ }
+
+ if (opcode_index == cntlr.menubytes) {
+ printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
+ trans->opcode);
+ return -1;
+ }
+
+ optypes = readw_(cntlr.optype);
+ optype = (optypes >> (opcode_index * 2)) & 0x3;
+ if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
+ optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
+ trans->bytesout >= 3) {
+ /* We guessed wrong earlier. Fix it up. */
+ trans->type = optype;
+ }
+ if (optype != trans->type) {
+ printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
+ optype);
+ return -1;
}
+ return opcode_index;
}
static int spi_setup_offset(spi_transaction *trans)
diff --git a/src/soc/intel/braswell/tsc_freq.c b/src/soc/intel/braswell/tsc_freq.c
index 929b6b59bc..b05a007c66 100644
--- a/src/soc/intel/braswell/tsc_freq.c
+++ b/src/soc/intel/braswell/tsc_freq.c
@@ -41,10 +41,9 @@ static const unsigned int cpu_bus_clk_freq_table[] = {
unsigned int cpu_bus_freq_khz(void)
{
msr_t clk_info = rdmsr(MSR_BSEL_CR_OVERCLOCK_CONTROL);
- if ((clk_info.lo & 0xF) < (sizeof(cpu_bus_clk_freq_table)/sizeof(unsigned int)))
- {
- return(cpu_bus_clk_freq_table[clk_info.lo & 0xF]);
- }
+ if ((clk_info.lo & 0xF)
+ < (sizeof(cpu_bus_clk_freq_table) / sizeof(unsigned int)))
+ return cpu_bus_clk_freq_table[clk_info.lo & 0xF];
return 0;
}
diff --git a/src/soc/intel/braswell/xhci.c b/src/soc/intel/braswell/xhci.c
index e3e3462fa5..76319c0689 100644
--- a/src/soc/intel/braswell/xhci.c
+++ b/src/soc/intel/braswell/xhci.c
@@ -42,7 +42,8 @@ static void xhci_init(device_t dev)
config->usb_comp_bg),
REG_SCRIPT_END
};
- printk(BIOS_INFO, "Override USB2_COMPBG to: 0x%X\n", config->usb_comp_bg);
+ printk(BIOS_INFO, "Override USB2_COMPBG to: 0x%X\n",
+ config->usb_comp_bg);
reg_script_run(ops);
}
}