summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/pcengines/alix1c/Options.lb1
-rw-r--r--src/mainboard/pcengines/alix1c/cache_as_ram_auto.c67
-rw-r--r--src/mainboard/pcengines/alix1c/irq_tables.c77
-rw-r--r--src/mainboard/pcengines/alix1c/mainboard.c7
4 files changed, 81 insertions, 71 deletions
diff --git a/src/mainboard/pcengines/alix1c/Options.lb b/src/mainboard/pcengines/alix1c/Options.lb
index c4fce0a4c6..71ef274069 100644
--- a/src/mainboard/pcengines/alix1c/Options.lb
+++ b/src/mainboard/pcengines/alix1c/Options.lb
@@ -104,7 +104,6 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=5
-#object irq_tables.o
##
## Build code to export a CMOS option table
diff --git a/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c b/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c
index 7f4898fac9..331e6cd274 100644
--- a/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c
+++ b/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c
@@ -38,7 +38,7 @@
#define POST_CODE(x) outb(x, 0x80)
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-/* The alix1c has no SMBUS; the setup is hard-wired. */
+/* The ALIX1.C has no SMBus; the setup is hard-wired. */
void cs5536_enable_smbus(void)
{
}
@@ -46,7 +46,8 @@ void cs5536_enable_smbus(void)
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-/* the part is a hynix hy5du121622ctp-d43
+/* The part is a Hynix hy5du121622ctp-d43.
+ *
* HY 5D U 12 16 2 2 C <blank> T <blank> P D43
* Hynix
* DDR SDRAM (5D)
@@ -62,18 +63,17 @@ void cs5536_enable_smbus(void)
* Lead Free (P)
* DDR400 3-3-3 (D43)
*/
-/* spd array */
-static u8 spdbytes[] = {
+/* SPD array */
+static const u8 spdbytes[] = {
[SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10,
[SPD_BANK_DENSITY] = 0x40,
[SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff,
[SPD_MEMORY_TYPE] = 7,
- [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* This is a guess for tRAC value */
- [SPD_MODULE_ATTRIBUTES] = 0xff, /* fix me later when we figure out */
+ [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */
+ [SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */
[SPD_NUM_BANKS_PER_SDRAM] = 4,
[SPD_PRIMARY_SDRAM_WIDTH] = 8,
- /* alix1c is 1 bank. */
- [SPD_NUM_DIMM_BANKS] = 1,
+ [SPD_NUM_DIMM_BANKS] = 1, /* ALIX1.C is 1 bank. */
[SPD_NUM_COLUMNS] = 0xa,
[SPD_NUM_ROWS] = 3,
[SPD_REFRESH] = 0x3a,
@@ -91,7 +91,7 @@ static u8 spd_read_byte(u8 device, u8 address)
print_debug("spd_read_byte dev ");
print_debug_hex8(device);
- if (device != (0x50<<1)){
+ if (device != (0x50 << 1)) {
print_debug(" returns 0xff\n");
return 0xff;
}
@@ -101,14 +101,17 @@ static u8 spd_read_byte(u8 device, u8 address)
print_debug(" returns ");
print_debug_hex8(spdbytes[address]);
print_debug("\r\n");
+
return spdbytes[address];
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x00001490 /* manual settings for the PLL */
-#define PLLMSRlo 0x02000030
-#define DIMM0 0xA0
-#define DIMM1 0xA2
+#define ManualConf 0 /* Do automatic strapped PLL config */
+#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */
+#define PLLMSRlo 0x02000030
+
+#define DIMM0 0xa0
+#define DIMM1 0xa2
+
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -119,9 +122,10 @@ static u8 spd_read_byte(u8 device, u8 address)
static void msr_init(void)
{
msr_t msr;
+
/* Setup access to the MC for under 1MB. Note MC not setup yet. */
msr.hi = 0x24fffc02;
- msr.lo = 0x10010000;
+ msr.lo = 0x10010000;
wrmsr(CPU_RCONF_DEFAULT, msr);
msr.hi = 0x20000000;
@@ -129,14 +133,13 @@ static void msr_init(void)
wrmsr(MSR_GLIU0 + 0x20, msr);
msr.hi = 0x20000000;
- msr.lo = 0xfff00;
+ msr.lo = 0xfff00;
wrmsr(MSR_GLIU1 + 0x20, msr);
-
}
+/** Early mainboard specific GPIO setup. */
static void mb_gpio_init(void)
{
- /* Early mainboard specific GPIO setup */
}
void cache_as_ram_main(void)
@@ -144,7 +147,9 @@ void cache_as_ram_main(void)
static const struct mem_controller memctrl[] = {
{.channel0 = {0x50}},
};
+
extern void RestartCAR();
+
POST_CODE(0x01);
SystemPreInit();
@@ -152,9 +157,8 @@ void cache_as_ram_main(void)
cs5536_early_setup();
- /* NOTE: must do this AFTER the early_setup!
- * it is counting on some early MSR setup
- * for cs5536
+ /* NOTE: Must do this AFTER cs5536_early_setup()!
+ * It is counting on some early MSR setup for the CS5536.
*/
cs5536_disable_internal_uart();
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -169,17 +173,18 @@ void cache_as_ram_main(void)
sdram_initialize(1, memctrl);
/* Check memory */
- /* enable this only if you are having questions */
- /* ram_check(0x00000000, 640 * 1024);*/
+ /* Enable this only if you are having questions. */
+ /* ram_check(0, 640 * 1024); */
- /* Switch from Cache as RAM to real RAM
- * There are two ways we could think about this.
+ /* Switch from Cache as RAM to real RAM.
+ *
+ * There are two ways we could think about this.
*
* 1. If we are using the auto.inc ROMCC way, the stack is
* going to be re-setup in the code following this code. Just
* wbinvd the stack to clear the cache tags. We don't care
* where the stack used to be.
- *
+ *
* 2. This file is built as a normal .c -> .o and linked in
* etc. The stack might be used to return etc. That means we
* care about what is in the stack. If we are smart we set
@@ -190,16 +195,16 @@ void cache_as_ram_main(void)
* located somewhere other than where LB would like it, you
* need to write some code to do a copy from cache to RAM
*
- * We use method 1 on Norwich and on this board too.
+ * We use method 1 on Norwich and on this board too.
*/
POST_CODE(0x02);
print_err("POST 02\n");
__asm__("wbinvd\n");
print_err("Past wbinvd\n");
- /* we are finding the return does not work on this
- * board. Explicitly call the label that is after the call to
- * us. This is gross, but sometimes at this level it is the
- * only way out
+
+ /* We are finding the return does not work on this board. Explicitly
+ * call the label that is after the call to us. This is gross, but
+ * sometimes at this level it is the only way out.
*/
done_cache_as_ram_main();
}
diff --git a/src/mainboard/pcengines/alix1c/irq_tables.c b/src/mainboard/pcengines/alix1c/irq_tables.c
index 55d2823085..1db35cba45 100644
--- a/src/mainboard/pcengines/alix1c/irq_tables.c
+++ b/src/mainboard/pcengines/alix1c/irq_tables.c
@@ -20,7 +20,6 @@
#include <arch/pirq_routing.h>
#include <console/console.h>
#include <arch/io.h>
-#include <arch/pirq_routing.h>
#include "../../../southbridge/amd/cs5536/cs5536.h"
/* Platform IRQs */
@@ -41,7 +40,11 @@
#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
-/* ALIX 1c interrupt wiring. Devices are:
+/*
+ * ALIX1.C interrupt wiring.
+ *
+ * Devices are:
+ *
* 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 31)
* 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block
* 00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
@@ -51,8 +54,11 @@
* 00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01)
* 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02)
* 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02)
+ *
* The only devices that interrupt are:
- * What device IRQ PIN PIN WIRED TO
+ *
+ * What Device IRQ PIN PIN WIRED TO
+ * -------------------------------------------------
* AES 00:01.2 0a 01 A A
* 3VPCI 00:0c.0 0a 01 A A
* eth0 00:0d.0 0b 01 A B
@@ -61,39 +67,40 @@
* usb 00:0f.4 0b 04 D D
* usb 00:0f.5 0b 04 D D
*
- * The only swizzled interrupt is eth0, where INTA is wired to interrupt controller line B
-*/
+ * The only swizzled interrupt is eth0, where INTA is wired to interrupt controller line B.
+ */
+
const struct irq_routing_table intel_irq_routing_table = {
-PIRQ_SIGNATURE, /* u32 signature */
-PIRQ_VERSION, /* u16 version */
-32 + 16 * IRQ_SLOT_COUNT,
-0x00, /* Where the interrupt router lies (bus) */
-(0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
-0x00, /* IRQs devoted exclusively to PCI usage */
-0x100B, /* Vendor */
-0x002B, /* Device */
-0, /* Crap (miniport) */
-{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
-0x00, /* u8 checksum , this has to set to
- * some value that would give 0
- * after the sum of all bytes
- * for this structure
- * (including checksum)
- */
-{
- /* If you change the number of entries,
- * change the IRQ_SLOT_COUNT above!
- */
- /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */
- /* PCI SLOT */
- {0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x4, 0x0}, /* slot1 */
- /* ONBOARD ETHER */
- {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */
- /* MINI PCI */
- {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* mini slot2 */
- /* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D */
- {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */
+ PIRQ_SIGNATURE,
+ PIRQ_VERSION,
+ 32 + 16 * IRQ_SLOT_COUNT,/* Max. number of devices on the bus */
+ 0x00, /* Where the interrupt router lies (bus) */
+ (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
+ 0x00, /* IRQs devoted exclusively to PCI usage */
+ 0x100B, /* Vendor */
+ 0x002B, /* Device */
+ 0, /* Crap (miniport) */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
+ 0x00, /* Checksum */
+ {
+ /* If you change the number of entries, change IRQ_SLOT_COUNT above! */
+
+ /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
+
+ /* CPU */
+ {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0},
+
+ /* PCI (slot 1) */
+ {0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x4, 0x0},
+
+ /* On-board ethernet */
+ {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0},
+
+ /* Mini PCI (slot 2) */
+ {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0},
+
+ /* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D. */
+ {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0},
}
};
diff --git a/src/mainboard/pcengines/alix1c/mainboard.c b/src/mainboard/pcengines/alix1c/mainboard.c
index 1343725ab7..743f2800fc 100644
--- a/src/mainboard/pcengines/alix1c/mainboard.c
+++ b/src/mainboard/pcengines/alix1c/mainboard.c
@@ -21,14 +21,13 @@
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
-#include <device/pci_ops.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/lxdef.h>
#include "../../../southbridge/amd/cs5536/cs5536.h"
#include "chip.h"
-/* Print the platform configuration */
+/* Print the platform configuration. */
void print_conf(void) {
#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
int i;
@@ -156,8 +155,8 @@ void print_conf(void) {
static void init(struct device *dev)
{
- printk_debug("ALIX1C ENTER %s\n", __FUNCTION__);
- printk_debug("ALIX1C EXIT %s\n", __FUNCTION__);
+ printk_debug("ALIX1.C ENTER %s\n", __FUNCTION__);
+ printk_debug("ALIX1.C EXIT %s\n", __FUNCTION__);
}
static void enable_dev(struct device *dev)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 10:29:31 +0000