summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/Iwill/DK8HTX/Config.lb222
-rw-r--r--src/mainboard/Iwill/DK8HTX/Options.lb215
-rw-r--r--src/mainboard/Iwill/DK8HTX/auto.c214
-rw-r--r--src/mainboard/Iwill/DK8HTX/chip.h5
-rw-r--r--src/mainboard/Iwill/DK8HTX/cmos.layout98
-rw-r--r--src/mainboard/Iwill/DK8HTX/failover.c66
-rw-r--r--src/mainboard/Iwill/DK8HTX/irq_tables.c41
-rw-r--r--src/mainboard/Iwill/DK8HTX/mainboard.c11
-rw-r--r--src/mainboard/Iwill/DK8HTX/mptable.c232
-rw-r--r--src/mainboard/Iwill/DK8HTX/reset.c6
-rw-r--r--src/mainboard/Iwill/DK8HTX/resourcemap.c267
11 files changed, 0 insertions, 1377 deletions
diff --git a/src/mainboard/Iwill/DK8HTX/Config.lb b/src/mainboard/Iwill/DK8HTX/Config.lb
deleted file mode 100644
index 318cd08e10..0000000000
--- a/src/mainboard/Iwill/DK8HTX/Config.lb
+++ /dev/null
@@ -1,222 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
-
-## ATI Rage XL framebuffering graphics driver
-dir /drivers/ati/ragexl
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-# config for Iwill/DK8HTX
-chip northbridge/amd/amdk8/root_complex
- device pci_domain 0 on
- chip northbridge/amd/amdk8
- device pci 18.0 on # LDT 0
- chip southbridge/amd/amd8131
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 on end
- device pci 1.0 off end
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off end # CIR
- device pnp 2e.7 off end # GAME_MIDI_GIPO1
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- end
- register "com1" = "{1}"
- # register "com1" = "{1, 0, 0x3f8, 4}"
- # register "lpt" = "{1}"
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on end
- device pci 1.5 off end
- device pci 1.6 off end
- end
- end # LDT0
- device pci 18.0 on end # LDT1
- device pci 18.0 on end # LDT2
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
- chip northbridge/amd/amdk8
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.0 on end
- device pci 19.1 on end
- device pci 19.2 on end
- device pci 19.3 on end
- end
- end
- device apic_cluster 0 on
- chip cpu/amd/socket_940
- device apic 0 on end
- end
- chip cpu/amd/socket_940
- device apic 1 on end
- end
- end
-end
-
diff --git a/src/mainboard/Iwill/DK8HTX/Options.lb b/src/mainboard/Iwill/DK8HTX/Options.lb
deleted file mode 100644
index c0a1043c16..0000000000
--- a/src/mainboard/Iwill/DK8HTX/Options.lb
+++ /dev/null
@@ -1,215 +0,0 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses LINUXBIOS_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-
-uses CONFIG_USE_INIT
-
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE=524288
-
-###
-### Build options
-###
-
-##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default FALLBACK_SIZE=0x40000
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
-##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default MAINBOARD_PART_NUMBER="HDAMA"
-default MAINBOARD_VENDOR="ARIMA"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
-
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-
-##
-## LinuxBIOS C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_STREAM = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-#default CC="$(CROSS_COMPILE)gcc -m32"
-#default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
-end
diff --git a/src/mainboard/Iwill/DK8HTX/auto.c b/src/mainboard/Iwill/DK8HTX/auto.c
deleted file mode 100644
index 6234bfe704..0000000000
--- a/src/mainboard/Iwill/DK8HTX/auto.c
+++ /dev/null
@@ -1,214 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void hard_reset(void)
-{
- set_bios_reset();
-
- /* enable cf9 */
- pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
- /* reset */
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
- } else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
- udelay(90);
- }
-}
-
-static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
-{
- /* Routing Table Node i
- *
- * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c
- * i: 0, 1, 2, 3, 4, 5, 6, 7
- *
- * [ 0: 3] Request Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [11: 8] Response Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [19:16] Broadcast route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- */
-
- uint32_t ret=0x00010101; /* default row entry */
-
- static const unsigned int rows_2p[2][2] = {
- { 0x00050101, 0x00010404 },
- { 0x00010404, 0x00050101 }
- };
-
- if(maxnodes>2) {
- print_debug("this mainboard is only designed for 2 cpus\r\n");
- maxnodes=2;
- }
-
- if (!(node>=maxnodes || row>=maxnodes)) {
- ret=rows_2p[node][row];
- }
-
- return ret;
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
- unsigned nodeid;
-
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
- /* Setup the console */
- w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
-print_err("A\n");
- setup_dk8htx_resource_map();
-print_err("B\n");
- needs_reset = setup_coherent_ht_domain();
-print_err("C\n");
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-print_err("D\n");
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-
-#if 0
- print_pci_devices();
-#endif
-
-print_err("E\n");
- enable_smbus();
-
-#if 0
- dump_spd_registers(&cpu[0]);
-#endif
-print_err("F\n");
-
- memreset_setup();
-print_err("G\n");
- sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
-print_err("H\n");
-
-#if 0
- dump_pci_devices();
-print_err("I\n");
-#endif
-#if 1
- dump_pci_device(PCI_DEV(0, 0x18, 2));
-print_err("J\n");
-#endif
-print_err("K\n");
-}
diff --git a/src/mainboard/Iwill/DK8HTX/chip.h b/src/mainboard/Iwill/DK8HTX/chip.h
deleted file mode 100644
index 7597752d33..0000000000
--- a/src/mainboard/Iwill/DK8HTX/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct chip_operations mainboard_Iwill_DK8HTX_ops;
-
-struct mainboard_Iwill_DK8HTX_config {
- int nothing;
-};
diff --git a/src/mainboard/Iwill/DK8HTX/cmos.layout b/src/mainboard/Iwill/DK8HTX/cmos.layout
deleted file mode 100644
index 5eb88b9a5a..0000000000
--- a/src/mainboard/Iwill/DK8HTX/cmos.layout
+++ /dev/null
@@ -1,98 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 dual_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 reserved_memory
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-8 0 DDR400
-8 1 DDR333
-8 2 DDR266
-8 3 DDR200
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
-
-
diff --git a/src/mainboard/Iwill/DK8HTX/failover.c b/src/mainboard/Iwill/DK8HTX/failover.c
deleted file mode 100644
index 262fdd60bd..0000000000
--- a/src/mainboard/Iwill/DK8HTX/failover.c
+++ /dev/null
@@ -1,66 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
-
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- /* Is this a cpu only reset? */
- if (early_mtrr_init_detected()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
diff --git a/src/mainboard/Iwill/DK8HTX/irq_tables.c b/src/mainboard/Iwill/DK8HTX/irq_tables.c
deleted file mode 100644
index 28c90e0f85..0000000000
--- a/src/mainboard/Iwill/DK8HTX/irq_tables.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*12, /* there can be total 12 devices on the bus */
- 0x00, /* Where the interrupt router lies (bus) */
- (0x07<<3)|0x3, /* Where the interrupt router lies (dev) */
- 0, /* IRQs devoted exclusively to PCI usage */
- 0x1022, /* Vendor */
- 0x746b, /* Device */
- 0, /* Crap (miniport) */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x6d, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
- {
- /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00,(0x07<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0x0def8}}, 0x0, 0x0},
- {0x03,(0x00<<3)|0x0, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x04, 0x0def8}}, 0x0, 0x0},
- {0x02,(0x01<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x1, 0x0},
- {0x02,(0x02<<3)|0x0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x2, 0x0},
- {0x01,(0x01<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x3, 0x0},
- {0x01,(0x02<<3)|0x0, {{0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x4, 0x0},
- {0x03,(0x04<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0x0def8}}, 0x5, 0x0},
- {0x03,(0x05<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x04, 0xdef8}, {0x01, 0x0def8}}, 0x6, 0x0},
- {0x03,(0x06<<3)|0x0, {{0x03, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0},
- {0x02,(0x03<<3)|0x0, {{0x04, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0},
- {0x02,(0x04<<3)|0x0, {{0x01, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0},
- {0x02,(0x05<<3)|0x0, {{0x02, 0xdef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0},
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/Iwill/DK8HTX/mainboard.c b/src/mainboard/Iwill/DK8HTX/mainboard.c
deleted file mode 100644
index aaa0a2bd1b..0000000000
--- a/src/mainboard/Iwill/DK8HTX/mainboard.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include "chip.h"
-
-struct chip_operations mainboard_Iwill_DK8HTX_ops = {
- CHIP_NAME("Iwill DK8HTX mainboard")
-};
-
diff --git a/src/mainboard/Iwill/DK8HTX/mptable.c b/src/mainboard/Iwill/DK8HTX/mptable.c
deleted file mode 100644
index 7f69756dbe..0000000000
--- a/src/mainboard/Iwill/DK8HTX/mptable.c
+++ /dev/null
@@ -1,232 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-void *smp_write_config_table(void *v)
-{
- static const char sig[4] = "PCMP";
- static const char oem[8] = "IWILL ";
- static const char productid[12] = "DK8HTX ";
- struct mp_config_table *mc;
- unsigned char bus_num;
- unsigned char bus_isa;
- unsigned char bus_8131_1;
- unsigned char bus_8131_2;
- unsigned char bus_8111_1;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- mc->mpc_length = sizeof(*mc); /* initially just the header */
- mc->mpc_spec = 0x04;
- mc->mpc_checksum = 0; /* not yet computed */
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
- mc->mpc_oemptr = 0;
- mc->mpc_oemsize = 0;
- mc->mpc_entry_count = 0; /* No entries yet... */
- mc->mpc_lapic = LAPIC_ADDR;
- mc->mpe_length = 0;
- mc->mpe_checksum = 0;
- mc->reserved = 0;
-
- smp_write_processors(mc);
-
- {
- device_t dev;
-
- /* 8111 */
- dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
- if (dev) {
- bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- }
- else {
- printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
-
- bus_8111_1 = 4;
- bus_isa = 5;
- }
- /* 8131-1 */
- dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
- if (dev) {
- bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- }
- else {
- printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
-
- bus_8131_1 = 2;
- }
- /* 8131-2 */
- dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
- if (dev) {
- bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- }
- else {
- printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
-
- bus_8131_2 = 3;
- }
- }
-
- /* define bus and isa numbers */
- for(bus_num = 0; bus_num < bus_isa; bus_num++) {
- smp_write_bus(mc, bus_num, "PCI ");
- }
- smp_write_bus(mc, bus_isa, "ISA ");
-
- /* IOAPIC handling */
- smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
- {
- device_t dev;
- struct resource *res;
- /* 8131 apic 3 */
- dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x03, 0x11, res->base);
- }
- }
- /* 8131 apic 4 */
- dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x04, 0x11, res->base);
- }
- }
- }
-
- /* ISA backward compatibility interrupts */
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, 0x02, 0x00);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x01, 0x02, 0x01);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, 0x02, 0x02);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x03, 0x02, 0x03);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x04, 0x02, 0x04);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x05, 0x02, 0x05);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x06, 0x02, 0x06);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x07, 0x02, 0x07);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x08, 0x02, 0x08);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x09, 0x02, 0x09);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0a, 0x02, 0x0a);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0b, 0x02, 0x0b);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0c, 0x02, 0x0c);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0d, 0x02, 0x0d);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0e, 0x02, 0x0e);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x0f, 0x02, 0x0f);
-
- /* Standard local interrupt assignments */
- smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, MP_APIC_ALL, 0x00);
- smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_isa, 0x00, MP_APIC_ALL, 0x01);
-
-
- /* PCI Slot 1 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|0, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|1, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|2, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|3, 0x02, 0x10);
-
- /* PCI Slot 2 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|0, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|1, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|2, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|3, 0x02, 0x11);
-
- /* PCI Slot 3 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|0, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|1, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|2, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|3, 0x02, 0x10);
-
- /* PCI Slot 4 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|0, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|1, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|2, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|3, 0x02, 0x11);
-
- /* PCI Slot 5 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5<<2)|0, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5<<2)|1, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5<<2)|2, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (5<<2)|3, 0x02, 0x10);
-
- /* PCI Slot 6 */
-#warning "FIXME get the irqs right, it's just hacked to work for now"
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4<<2)|0, 0x02, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4<<2)|1, 0x02, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4<<2)|2, 0x02, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8111_1, (4<<2)|3, 0x02, 0x13);
-
- /* On board nics */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (3<<2)|0, 0x02, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (4<<2)|0, 0x02, 0x13);
-
- /* There is no extension information... */
-
- /* Compute the checksums */
- mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
- mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
- printk_debug("Wrote the mp table end at: %p - %p\n",
- mc, smp_next_mpe_entry(mc));
- return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr);
- return (unsigned long)smp_write_config_table(v);
-}
-
diff --git a/src/mainboard/Iwill/DK8HTX/reset.c b/src/mainboard/Iwill/DK8HTX/reset.c
deleted file mode 100644
index 3db3956ec6..0000000000
--- a/src/mainboard/Iwill/DK8HTX/reset.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "../../../southbridge/amd/amd8111/amd8111_reset.c"
-
-void hard_reset(void)
-{
- amd8111_hard_reset(0, 0);
-}
diff --git a/src/mainboard/Iwill/DK8HTX/resourcemap.c b/src/mainboard/Iwill/DK8HTX/resourcemap.c
deleted file mode 100644
index 8be4fa2e6e..0000000000
--- a/src/mainboard/Iwill/DK8HTX/resourcemap.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Iwill DK8HTX needs a different resource map
- *
- */
-
-static void setup_dk8htx_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
-
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000c020,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00009033,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration region i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x03000203,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x04040003,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
- };
-
- int max;
- max = sizeof(register_values)/sizeof(register_values[0]);
- setup_resource_map(register_values, max);
-}
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 06:03:56 +0000