diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/qualcomm/sc7180/clock.c | 18 | ||||
| -rw-r--r-- | src/soc/qualcomm/sc7180/usb.c | 16 |
2 files changed, 17 insertions, 17 deletions
diff --git a/src/soc/qualcomm/sc7180/clock.c b/src/soc/qualcomm/sc7180/clock.c index 97b7b280ca..9092a4e185 100644 --- a/src/soc/qualcomm/sc7180/clock.c +++ b/src/soc/qualcomm/sc7180/clock.c @@ -62,10 +62,10 @@ struct clock_config qspi_core_cfg[] = { static int clock_configure_gpll0(void) { - setbits_le32(&gcc->gpll0.user_ctl_u, 1 << SCALE_FREQ_SHFT); + setbits32(&gcc->gpll0.user_ctl_u, 1 << SCALE_FREQ_SHFT); /* Keep existing GPLL0 configuration, in RUN mode @600Mhz. */ - setbits_le32(&gcc->gpll0.user_ctl, + setbits32(&gcc->gpll0.user_ctl, 1 << CLK_CTL_GPLL_PLLOUT_EVEN_SHFT | 1 << CLK_CTL_GPLL_PLLOUT_MAIN_SHFT | 1 << CLK_CTL_GPLL_PLLOUT_ODD_SHFT); @@ -77,7 +77,7 @@ static int clock_configure_mnd(struct sc7180_clock *clk, uint32_t m, uint32_t n, uint32_t d_2) { struct sc7180_mnd_clock *mnd = (struct sc7180_mnd_clock *)clk; - setbits_le32(&clk->rcg_cfg, + setbits32(&clk->rcg_cfg, RCG_MODE_DUAL_EDGE << CLK_CTL_CFG_MODE_SHFT); write32(&mnd->m, m & CLK_CTL_RCG_MND_BMSK); @@ -111,7 +111,7 @@ static int clock_configure(struct sc7180_clock *clk, clk_cfg[idx].d_2); /* Commit config to RCG*/ - setbits_le32(&clk->rcg_cmd, BIT(CLK_CTL_CMD_UPDATE_SHFT)); + setbits32(&clk->rcg_cmd, BIT(CLK_CTL_CMD_UPDATE_SHFT)); return 0; } @@ -125,7 +125,7 @@ static int clock_enable_vote(void *cbcr_addr, void *vote_addr, uint32_t vote_bit) { /* Set clock vote bit */ - setbits_le32(vote_addr, BIT(vote_bit)); + setbits32(vote_addr, BIT(vote_bit)); /* Ensure clock is enabled */ while (clock_is_off(cbcr_addr)) @@ -137,7 +137,7 @@ static int clock_enable_vote(void *cbcr_addr, void *vote_addr, static int clock_enable(void *cbcr_addr) { /* Set clock enable bit */ - setbits_le32(cbcr_addr, BIT(CLK_CTL_CBC_CLK_EN_SHFT)); + setbits32(cbcr_addr, BIT(CLK_CTL_CBC_CLK_EN_SHFT)); /* Ensure clock is enabled */ while (clock_is_off(cbcr_addr)) @@ -149,7 +149,7 @@ static int clock_enable(void *cbcr_addr) void clock_reset_aop(void) { /* Bring AOP out of RESET */ - clrbits_le32(&aoss->aoss_cc_apcs_misc, BIT(AOP_RESET_SHFT)); + clrbits32(&aoss->aoss_cc_apcs_misc, BIT(AOP_RESET_SHFT)); } void clock_configure_qspi(uint32_t hz) @@ -166,9 +166,9 @@ int clock_reset_bcr(void *bcr_addr, bool reset) struct sc7180_bcr *bcr = bcr_addr; if (reset) - setbits_le32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT)); + setbits32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT)); else - clrbits_le32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT)); + clrbits32(bcr, BIT(CLK_CTL_BCR_BLK_ARES_SHFT)); return 0; } diff --git a/src/soc/qualcomm/sc7180/usb.c b/src/soc/qualcomm/sc7180/usb.c index 4183e9b97d..639f40136e 100644 --- a/src/soc/qualcomm/sc7180/usb.c +++ b/src/soc/qualcomm/sc7180/usb.c @@ -13,10 +13,10 @@ * GNU General Public License for more details. */ -#include <arch/mmio.h> #include <stdlib.h> #include <console/console.h> #include <delay.h> +#include <device/mmio.h> #include <soc/usb.h> #include <soc/clock.h> #include <soc/addressmap.h> @@ -565,7 +565,7 @@ static void qusb2_phy_set_tune_param(struct usb_dwc3_cfg *dwc3) * tune parameters. */ if (tune_val) - clrsetbits_le32(&dwc3->qusb_phy_dig->tune1, + clrsetbits32(&dwc3->qusb_phy_dig->tune1, PORT_TUNE1_MASK, tune_val << 4); } @@ -602,7 +602,7 @@ static void tune_phy(struct usb_dwc3_cfg *dwc3, struct usb_qusb_phy_dig *phy) static void hs_qusb_phy_init(struct usb_dwc3_cfg *dwc3) { /* PWR_CTRL: set the power down bit to disable the PHY */ - setbits_le32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN); + setbits32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN); write32(&dwc3->qusb_phy_pll->analog_controls_two, QUSB2PHY_PLL_ANALOG_CONTROLS_TWO); @@ -622,7 +622,7 @@ static void hs_qusb_phy_init(struct usb_dwc3_cfg *dwc3) tune_phy(dwc3, dwc3->qusb_phy_dig); /* PWR_CTRL1: Clear the power down bit to enable the PHY */ - clrbits_le32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN); + clrbits32(&dwc3->qusb_phy_dig->pwr_ctrl1, POWER_DOWN); write32(&dwc3->qusb_phy_dig->debug_ctrl2, DEBUG_CTRL2_MUX_PLL_LOCK_STATUS); @@ -688,7 +688,7 @@ static void ss_qmp_phy_init(struct usb_dwc3_cfg *dwc3) static void setup_dwc3(struct usb_dwc3 *dwc3) { /* core exits U1/U2/U3 only in PHY power state P1/P2/P3 respectively */ - clrsetbits_le32(&dwc3->usb3pipectl, + clrsetbits32(&dwc3->usb3pipectl, DWC3_GUSB3PIPECTL_DELAYP1TRANS, DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX); @@ -698,18 +698,18 @@ static void setup_dwc3(struct usb_dwc3 *dwc3) * 2. Set USBTRDTIM to the corresponding value * according to the UTMI+ PHY interface. */ - clrsetbits_le32(&dwc3->usb2phycfg, + clrsetbits32(&dwc3->usb2phycfg, (DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK | DWC3_GUSB2PHYCFG_PHYIF_MASK), (DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) | DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT))); - clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK | + clrsetbits32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK | DWC3_GCTL_DISSCRAMBLE), DWC3_GCTL_U2EXIT_LFPS | DWC3_GCTL_DSBLCLKGTNG); /* configure controller in Host mode */ - clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)), + clrsetbits32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)), DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_HOST)); printk(BIOS_SPEW, "Configure USB in Host mode\n"); } |