summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/asus/a8n_e/romstage.c6
-rw-r--r--src/mainboard/gigabyte/m57sli/romstage.c4
-rw-r--r--src/mainboard/msi/ms7260/romstage.c4
-rw-r--r--src/mainboard/msi/ms9282/romstage.c17
-rw-r--r--src/mainboard/msi/ms9652_fam10/romstage.c3
-rw-r--r--src/mainboard/nvidia/l1_2pvv/romstage.c3
-rw-r--r--src/mainboard/supermicro/h8dme/romstage.c13
-rw-r--r--src/mainboard/supermicro/h8dmr/romstage.c20
-rw-r--r--src/mainboard/supermicro/h8dmr_fam10/romstage.c216
-rw-r--r--src/mainboard/supermicro/h8qme_fam10/romstage.c11
-rw-r--r--src/mainboard/supermicro/x6dai_g/romstage.c2
-rw-r--r--src/mainboard/supermicro/x6dhe_g/romstage.c2
-rw-r--r--src/mainboard/tyan/s2912/romstage.c4
-rw-r--r--src/mainboard/tyan/s2912_fam10/romstage.c4
-rw-r--r--src/southbridge/intel/esb6300/esb6300_smbus.c11
-rw-r--r--src/southbridge/intel/esb6300/esb6300_smbus.h4
-rw-r--r--src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c3
17 files changed, 163 insertions, 164 deletions
diff --git a/src/mainboard/asus/a8n_e/romstage.c b/src/mainboard/asus/a8n_e/romstage.c
index 8737152c81..247aa740a2 100644
--- a/src/mainboard/asus/a8n_e/romstage.c
+++ b/src/mainboard/asus/a8n_e/romstage.c
@@ -63,11 +63,6 @@
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "cpu/amd/dualcore/dualcore.c"
-static void memreset_setup(void)
-{
- /* Nothing to do. */
-}
-
static void memreset(int controllers, const struct mem_controller *ctrl)
{
/* Nothing to do. */
@@ -181,7 +176,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
dump_smbus_registers();
#endif
- memreset_setup();
sdram_initialize(nodes, ctrl);
#if 0
diff --git a/src/mainboard/gigabyte/m57sli/romstage.c b/src/mainboard/gigabyte/m57sli/romstage.c
index f329c661e6..1e3bee8845 100644
--- a/src/mainboard/gigabyte/m57sli/romstage.c
+++ b/src/mainboard/gigabyte/m57sli/romstage.c
@@ -265,6 +265,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
}
#endif
+ init_timer(); // Need to use TMICT to synconize FID/VID
+
needs_reset |= optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
@@ -281,9 +283,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_smbus();
- //do we need apci timer, tsc...., only debug need it for better output
/* all ap stopped? */
-// init_timer(); // Need to use TMICT to synconize FID/VID
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c
index 9f84911b36..3f7b69dc1b 100644
--- a/src/mainboard/msi/ms7260/romstage.c
+++ b/src/mainboard/msi/ms7260/romstage.c
@@ -237,6 +237,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
}
#endif
+ init_timer(); /* Need to use TMICT to synconize FID/VID. */
+
needs_reset |= optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
@@ -253,9 +255,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_smbus();
- /* Do we need apci timer, tsc...., only debug need it for better output */
/* All AP stopped? */
- // init_timer(); /* Need to use TMICT to synconize FID/VID. */
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c
index 87517f078c..ee44ea2ad3 100644
--- a/src/mainboard/msi/ms9282/romstage.c
+++ b/src/mainboard/msi/ms9282/romstage.c
@@ -199,16 +199,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#endif
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
- needs_reset = optimize_link_coherent_ht();
+ init_timer(); /* Need to use TMICT to synconize FID/VID. */
- needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ needs_reset = optimize_link_coherent_ht();
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ needs_reset |= mcp55_early_setup_x();
- needs_reset |= mcp55_early_setup_x();
-
- if (needs_reset) {
- print_info("ht reset -\n");
- soft_reset();
- }
+ if (needs_reset) {
+ print_info("ht reset -\n");
+ soft_reset();
+ }
//It's the time to set ctrl now;
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
@@ -226,6 +226,5 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
post_cache_as_ram();
-
}
diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c
index 0d2f80fcf8..c1cb92c8f6 100644
--- a/src/mainboard/msi/ms9652_fam10/romstage.c
+++ b/src/mainboard/msi/ms9652_fam10/romstage.c
@@ -58,6 +58,8 @@
#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"
@@ -262,6 +264,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
msr=rdmsr(0xc0010071);
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
#endif
+ init_timer(); /* Need to use TMICT to synconize FID/VID. */
wants_reset = mcp55_early_setup_x();
diff --git a/src/mainboard/nvidia/l1_2pvv/romstage.c b/src/mainboard/nvidia/l1_2pvv/romstage.c
index 58bf5c2958..62be8c2fd5 100644
--- a/src/mainboard/nvidia/l1_2pvv/romstage.c
+++ b/src/mainboard/nvidia/l1_2pvv/romstage.c
@@ -250,6 +250,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
}
#endif
+ init_timer(); /* Need to use TMICT to synconize FID/VID. */
needs_reset |= optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
@@ -267,9 +268,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_smbus();
- //do we need apci timer, tsc...., only debug need it for better output
/* all ap stopped? */
-// init_timer(); // Need to use TMICT to synconize FID/VID
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c
index e2e297b9ce..4055e7065d 100644
--- a/src/mainboard/supermicro/h8dme/romstage.c
+++ b/src/mainboard/supermicro/h8dme/romstage.c
@@ -46,16 +46,14 @@
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
-// for enable the FAN
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
-
#include "pc80/serial.c"
#include "console/console.c"
#include "lib/ramtest.c"
#include <cpu/amd/model_fxx_rev.h>
-// #include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+// for enable the FAN
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
@@ -313,7 +311,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
}
#endif
-#if 1
+ init_timer(); /* Need to use TMICT to synconize FID/VID. */
+
needs_reset |= optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
@@ -323,7 +322,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
print_info("ht reset -\n");
soft_reset();
}
-#endif
+
allow_all_aps_stop(bsp_apicid);
//It's the time to set ctrl in sysinfo now;
@@ -331,9 +330,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_smbus(); /* enable in sio_setup */
- //do we need apci timer, tsc...., only debug need it for better output
/* all ap stopped? */
-// init_timer(); // Need to use TMICT to synconize FID/VID
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
diff --git a/src/mainboard/supermicro/h8dmr/romstage.c b/src/mainboard/supermicro/h8dmr/romstage.c
index 28332dca5d..fd0634ff62 100644
--- a/src/mainboard/supermicro/h8dmr/romstage.c
+++ b/src/mainboard/supermicro/h8dmr/romstage.c
@@ -49,16 +49,14 @@
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
-// for enable the FAN
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
-
#include "pc80/serial.c"
#include "console/console.c"
#include "lib/ramtest.c"
#include <cpu/amd/model_fxx_rev.h>
-//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+// for enable the FAN
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
@@ -213,12 +211,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if SET_FIDVID == 1
-
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
+ printk(BIOS_DEBUG, "begin msr fid, vid %08x, %08x\n", msr.hi, msr.lo);
}
enable_fid_change();
@@ -231,12 +227,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
msr_t msr;
msr=rdmsr(0xc0010042);
- print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
+ printk(BIOS_DEBUG, "end msr fid, vid %08x, %08x\n", msr.hi, msr.lo);
}
#endif
-#if 1
+ init_timer(); // Need to use TMICT to synconize FID/VID
+
needs_reset |= optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
@@ -246,7 +242,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
print_info("ht reset -\n");
soft_reset();
}
-#endif
+
allow_all_aps_stop(bsp_apicid);
//It's the time to set ctrl in sysinfo now;
@@ -254,9 +250,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
// enable_smbus(); /* enable in sio_setup */
- //do we need apci timer, tsc...., only debug need it for better output
/* all ap stopped? */
-// init_timer(); // Need to use TMICT to synconize FID/VID
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c
index a763414a4e..3e68e86a74 100644
--- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c
+++ b/src/mainboard/supermicro/h8dmr_fam10/romstage.c
@@ -44,18 +44,18 @@
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
-// for enable the FAN
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
#include "pc80/serial.c"
#include "console/console.c"
#include "lib/ramtest.c"
#include <cpu/amd/model_10xxx_rev.h>
-//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+// for enable the FAN
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
-
+#include "cpu/amd/model_10xxx/apic_timer.c"
+#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
@@ -90,7 +90,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdfam10/raminit_amdmct.c"
#include "northbridge/amd/amdfam10/amdfam10_pci.c"
-#include "resourcemap.c"
+#include "resourcemap.c"
#include "cpu/amd/quadcore/quadcore.c"
@@ -103,8 +103,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
-
-
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/microcode/microcode.c"
@@ -118,23 +116,25 @@ static inline int spd_read_byte(unsigned device, unsigned address)
static void sio_setup(void)
{
- uint32_t dword;
- uint8_t byte;
- enable_smbus();
-// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */
- smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */
-
- byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
- byte |= 0x20;
- pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
- dword |= (1<<0);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
-
- dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
- dword |= (1<<16);
- pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
+ uint32_t dword;
+ uint8_t byte;
+
+ enable_smbus();
+ // smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */
+ /* set FAN ctrl to DC mode */
+ smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff);
+
+ byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0);
+ dword |= (1 << 0);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword);
+
+ dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4);
+ dword |= (1 << 16);
+ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword);
}
@@ -142,14 +142,15 @@ static void sio_setup(void)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
- struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE +
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
u32 bsp_apicid = 0;
u32 val;
u32 wants_reset;
msr_t msr;
- if (!cpu_init_detectedx && boot_cpu()) {
+ if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
@@ -160,126 +161,129 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Setup the mcp55 */
mcp55_enable_rom();
- }
+ }
- post_code(0x30);
-
- if (bist == 0) {
+ post_code(0x30);
+
+ if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
+ }
- post_code(0x32);
+ post_code(0x32);
pnp_enter_ext_func_mode(SERIAL_DEV);
pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6));
- w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
pnp_exit_ext_func_mode(SERIAL_DEV);
- uart_init();
- console_init();
- printk(BIOS_DEBUG, "\n");
+ uart_init();
+ console_init();
+ printk(BIOS_DEBUG, "\n");
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- val = cpuid_eax(1);
- printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
- printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
- printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid);
- printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+ printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n", sysinfo, sysinfo + 1);
+ printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+ /* Setup sysinfo defaults */
+ set_sysinfo_in_ram(0);
- /* Setup sysinfo defaults */
- set_sysinfo_in_ram(0);
+ update_microcode(val);
+ post_code(0x33);
- update_microcode(val);
- post_code(0x33);
+ cpuSetAMDMSR();
+ post_code(0x34);
- cpuSetAMDMSR();
- post_code(0x34);
+ amd_ht_init(sysinfo);
+ post_code(0x35);
- amd_ht_init(sysinfo);
- post_code(0x35);
+ /* Setup nodes PCI space and start core 0 AP init. */
+ finalize_node_setup(sysinfo);
- /* Setup nodes PCI space and start core 0 AP init. */
- finalize_node_setup(sysinfo);
+ /* Setup any mainboard PCI settings etc. */
+ setup_mb_resource_map();
+ post_code(0x36);
- /* Setup any mainboard PCI settings etc. */
- setup_mb_resource_map();
- post_code(0x36);
+ /* wait for all the APs core0 started by finalize_node_setup. */
- /* wait for all the APs core0 started by finalize_node_setup. */
- /* FIXME: A bunch of cores are going to start output to serial at once.
- * It would be nice to fixup prink spinlocks for ROM XIP mode.
- * I think it could be done by putting the spinlock flag in the cache
- * of the BSP located right after sysinfo.
- */
+ /* FIXME: A bunch of cores are going to start output to serial at once.
+ * It would be nice to fixup prink spinlocks for ROM XIP mode.
+ * I think it could be done by putting the spinlock flag in the cache
+ * of the BSP located right after sysinfo.
+ */
- wait_all_core0_started();
+ wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
- /* Core0 on each node is configured. Now setup any additional cores. */
- printk(BIOS_DEBUG, "start_other_cores()\n");
- start_other_cores();
- post_code(0x37);
- wait_all_other_cores_started(bsp_apicid);
+ /* Core0 on each node is configured. Now setup any additional cores. */
+ printk(BIOS_DEBUG, "start_other_cores()\n");
+ start_other_cores();
+ post_code(0x37);
+ wait_all_other_cores_started(bsp_apicid);
#endif
- post_code(0x38);
+ post_code(0x38);
#if SET_FIDVID == 1
- msr = rdmsr(0xc0010071);
- printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+ msr = rdmsr(0xc0010071);
+ printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n",
+ msr.hi, msr.lo);
- /* FIXME: The sb fid change may survive the warm reset and only
- * need to be done once.*/
+ /* FIXME: The sb fid change may survive the warm reset and only
+ * need to be done once.*/
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
- post_code(0x39);
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+ post_code(0x39);
- if (!warm_reset_detect(0)) { // BSP is node 0
- init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
- } else {
- init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
- }
+ if (!warm_reset_detect(0)) { // BSP is node 0
+ init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
+ } else {
+ init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
+ }
- post_code(0x3A);
+ post_code(0x3A);
- /* show final fid and vid */
- msr=rdmsr(0xc0010071);
- printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+ /* show final fid and vid */
+ msr = rdmsr(0xc0010071);
+ printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n",
+ msr.hi, msr.lo);
#endif
- wants_reset = mcp55_early_setup_x();
+ init_timer(); // Need to use TMICT to synconize FID/VID
- /* Reset for HT, FIDVID, PLL and errata changes to take affect. */
- if (!warm_reset_detect(0)) {
- print_info("...WARM RESET...\n\n\n");
- soft_reset();
- die("After soft_reset_x - shouldn't see this message!!!\n");
- }
+ wants_reset = mcp55_early_setup_x();
- if (wants_reset)
- printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n");
+ /* Reset for HT, FIDVID, PLL and errata changes to take affect. */
+ if (!warm_reset_detect(0)) {
+ print_info("...WARM RESET...\n\n\n");
+ soft_reset();
+ die("After soft_reset_x - shouldn't see this message!!!\n");
+ }
- post_code(0x3B);
+ if (wants_reset)
+ printk(BIOS_DEBUG, "mcp55_early_setup_x wants additional reset!\n");
-/* It's the time to set ctrl in sysinfo now; */
-printk(BIOS_DEBUG, "fill_mem_ctrl()\n");
-fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ post_code(0x3B);
-post_code(0x3D);
+ /* It's the time to set ctrl in sysinfo now; */
+ printk(BIOS_DEBUG, "fill_mem_ctrl()\n");
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-//printk(BIOS_DEBUG, "enable_smbus()\n");
-// enable_smbus(); /* enable in sio_setup */
+ post_code(0x3D);
-post_code(0x40);
+ // printk(BIOS_DEBUG, "enable_smbus()\n");
+ // enable_smbus(); /* enable in sio_setup */
- printk(BIOS_DEBUG, "raminit_amdmct()\n");
- raminit_amdmct(sysinfo);
- post_code(0x41);
+ post_code(0x40);
-// printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
- post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
- post_code(0x42); // Should never see this post code.
+ printk(BIOS_DEBUG, "raminit_amdmct()\n");
+ raminit_amdmct(sysinfo);
+ post_code(0x41);
+ // printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
+ post_cache_as_ram(); // BSP switch stack to ram, copy + execute stage 2
+ post_code(0x42); // Should never see this post code.
}
-
diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c
index 1b2686dbda..aa2081f7df 100644
--- a/src/mainboard/supermicro/h8qme_fam10/romstage.c
+++ b/src/mainboard/supermicro/h8qme_fam10/romstage.c
@@ -44,19 +44,18 @@
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
-// for enable the FAN
-#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
-
#include "pc80/serial.c"
#include "console/console.c"
#include "lib/ramtest.c"
#include <cpu/amd/model_10xxx_rev.h>
-//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
+// for enable the FAN
+#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
-
+#include "cpu/amd/model_10xxx/apic_timer.c"
+#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
@@ -293,6 +292,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
#endif
+ init_timer(); // Need to use TMICT to synconize FID/VID
+
wants_reset = mcp55_early_setup_x();
/* Reset for HT, FIDVID, PLL and errata changes to take affect. */
diff --git a/src/mainboard/supermicro/x6dai_g/romstage.c b/src/mainboard/supermicro/x6dai_g/romstage.c
index 9fef5ccaa5..b718daf9ab 100644
--- a/src/mainboard/supermicro/x6dai_g/romstage.c
+++ b/src/mainboard/supermicro/x6dai_g/romstage.c
@@ -10,6 +10,8 @@
#include "pc80/serial.c"
#include "console/console.c"
#include "lib/ramtest.c"
+#include "pc80/udelay_io.c"
+#include "lib/delay.c"
#include "southbridge/intel/esb6300/esb6300_early_smbus.c"
#include "northbridge/intel/e7525/raminit.h"
#include "superio/winbond/w83627hf/w83627hf.h"
diff --git a/src/mainboard/supermicro/x6dhe_g/romstage.c b/src/mainboard/supermicro/x6dhe_g/romstage.c
index b17429aca9..67bd2cfb56 100644
--- a/src/mainboard/supermicro/x6dhe_g/romstage.c
+++ b/src/mainboard/supermicro/x6dhe_g/romstage.c
@@ -10,6 +10,8 @@
#include "pc80/serial.c"
#include "console/console.c"
#include "lib/ramtest.c"
+#include "pc80/udelay_io.c"
+#include "lib/delay.c"
#include "southbridge/intel/esb6300/esb6300_early_smbus.c"
#include "northbridge/intel/e7520/raminit.h"
#include "superio/winbond/w83627hf/w83627hf.h"
diff --git a/src/mainboard/tyan/s2912/romstage.c b/src/mainboard/tyan/s2912/romstage.c
index 26ce672bf4..144c629e20 100644
--- a/src/mainboard/tyan/s2912/romstage.c
+++ b/src/mainboard/tyan/s2912/romstage.c
@@ -245,6 +245,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
}
#endif
+ init_timer(); // Need to use TMICT to synconize FID/VID
+
needs_reset |= optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
@@ -262,9 +264,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_smbus();
- //do we need apci timer, tsc...., only debug need it for better output
/* all ap stopped? */
-// init_timer(); // Need to use TMICT to synconize FID/VID
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c
index 5f6d2a7691..6ca5eec3ce 100644
--- a/src/mainboard/tyan/s2912_fam10/romstage.c
+++ b/src/mainboard/tyan/s2912_fam10/romstage.c
@@ -59,6 +59,8 @@
#include "northbridge/amd/amdfam10/raminit.h"
#include "northbridge/amd/amdfam10/amdfam10.h"
+#include "cpu/amd/model_10xxx/apic_timer.c"
+#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdfam10/reset_test.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
@@ -254,6 +256,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
#endif
+ init_timer(); // Need to use TMICT to synconize FID/VID
+
wants_reset = mcp55_early_setup_x();
/* Reset for HT, FIDVID, PLL and errata changes to take affect. */
diff --git a/src/southbridge/intel/esb6300/esb6300_smbus.c b/src/southbridge/intel/esb6300/esb6300_smbus.c
index 9be4a4a37e..5b1940f93e 100644
--- a/src/southbridge/intel/esb6300/esb6300_smbus.c
+++ b/src/southbridge/intel/esb6300/esb6300_smbus.c
@@ -8,11 +8,16 @@
#include "esb6300.h"
#include "esb6300_smbus.h"
-static int lsmbus_read_byte(device_t dev, uint8_t address)
+static int lsmbus_read_byte(device_t dev, u8 address)
{
+ u16 device;
struct resource *res;
- res = find_resource(dev, 0x20);
-
+ struct bus *pbus;
+
+ device = dev->path.i2c.device;
+ pbus = get_pbus_smbus(dev);
+ res = find_resource(pbus->dev, 0x20);
+
return do_smbus_read_byte(res->base, device, address);
}
diff --git a/src/southbridge/intel/esb6300/esb6300_smbus.h b/src/southbridge/intel/esb6300/esb6300_smbus.h
index 439b8fc586..0b793c37f9 100644
--- a/src/southbridge/intel/esb6300/esb6300_smbus.h
+++ b/src/southbridge/intel/esb6300/esb6300_smbus.h
@@ -40,8 +40,7 @@ static int smbus_wait_until_done(unsigned smbus_io_base)
return loops?0:-1;
}
-#ifdef UNUSED_CODE
-static int smbus_wait_until_blk_done(unsigned smbus_io_base)
+static inline int smbus_wait_until_blk_done(unsigned smbus_io_base)
{
unsigned loops = SMBUS_TIMEOUT;
unsigned char byte;
@@ -53,7 +52,6 @@ static int smbus_wait_until_blk_done(unsigned smbus_io_base)
} while((byte&(1<<7)) == 0);
return loops?0:-1;
}
-#endif
static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
{
diff --git a/src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c b/src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c
index 3a178b8e74..60337d1635 100644
--- a/src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c
+++ b/src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c
@@ -134,9 +134,6 @@ static void mcp55_early_clear_port(unsigned mcp55_num, unsigned *busn, unsigned
}
-#include "src/pc80/udelay_io.c"
-#include "src/lib/delay.c"
-
static void mcp55_early_pcie_setup(unsigned busnx, unsigned devnx, unsigned anactrl_io_base, unsigned pci_e_x)
{
uint32_t tgio_ctrl;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 01:13:31 +0000