summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/northbridge/via/vx800/examples/chipset_init.c1241
-rw-r--r--src/northbridge/via/vx800/examples/driving_clk_phase_data.c242
-rw-r--r--src/northbridge/via/vx800/examples/romstage.c541
3 files changed, 0 insertions, 2024 deletions
diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c
deleted file mode 100644
index 3f9c70fe10..0000000000
--- a/src/northbridge/via/vx800/examples/chipset_init.c
+++ /dev/null
@@ -1,1241 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#if CONFIG_HAVE_ACPI_RESUME
-#include <arch/acpi.h>
-#endif
-#include "../vx800.h"
-
-#include <arch/io.h>
-#include "pci_rawops.h"
-
-static const struct VIA_PCI_REG_INIT_TABLE mSbStage1InitTbl[] = {
- // Combine Stage1 registers
- {0x00, 0xFF, SB_LPC_REG(0x41), 0x40, 0x40},
-
- // Acpi init registers in sb stage1
- {0x00, 0xFF, SB_LPC_REG(0x40), 0x04, 0x04}, // Enable 4D0/4D1 support
- {0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08}, // Enable RTC port 74/75
- {0x00, 0xFF, SB_LPC_REG(0x51), 0x0D, 0x0D}, // and KBC
- {0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09}, // Enable Serial IRQ
- {0x00, 0xFF, SB_LPC_REG(0x67), 0x00, 0x04}, // Set FERR voltage to 1.5v
- {0x00, 0xFF, SB_LPC_REG(0x98), 0xFF, 0x00}, // Disable GP3 Timer
-
- {0x00, 0xFF, SB_IDEC_REG(0xb9), 0x01, 0x01},
-
- {0x00, 0xFF, SB_VLINK_REG(0xE6), 0xFF, 0x39}, // Enable SMM A-Seg, MSI and Io APIC
- ///// SPI-BAR.
- //// SPI_BASE_ADDRESS = 0xFED1 0000
- {0x00, 0xFF, SB_LPC_REG(0xBC), 0xFF, 0x00},
- {0x00, 0xFF, SB_LPC_REG(0xBD), 0xFF, 0xD1},
- {0x00, 0xFF, SB_LPC_REG(0xBE), 0xFF, 0xFE},
-// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBC), 0xFF, 0x00},//this , for the different macro
-// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBD), 0xFF, 0xD1},
-// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBE), 0xFF, 0xFE},
- ///// End of 2008-04-17
-
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = {
- // D0F0: AGP Feature. For 3353, No AGP Feature
-
- // D0F2~D0F3 is configured by MemoryInit Peim
-
- // D0F4: NB PMU
- { 0x00, 0xFF, NB_PMU_REG(0x84), 0x00, 0xDB },
- { 0x00, 0xFF, NB_PMU_REG(0x85), 0x00, 0x05 },
- { 0x00, 0xFF, NB_PMU_REG(0x89), 0x00, 0xF8 },
- { 0x00, 0xFF, NB_PMU_REG(0x8B), 0x00, 0xBF },
- { 0x00, 0xFF, NB_PMU_REG(0x8D), 0x00, 0xFC },
- { 0x00, 0xFF, NB_PMU_REG(0x8E), 0x00, 0x19 },
- { 0x00, 0xFF, NB_PMU_REG(0x8F), 0x03, 0x00 },
- { 0x00, 0xFF, NB_PMU_REG(0x90), 0x00, 0xFF },
- { 0x00, 0xFF, NB_PMU_REG(0x91), 0x00, 0xFF },
- { 0x00, 0xFF, NB_PMU_REG(0x92), 0x00, 0xCC },
- { 0x00, 0xFF, NB_PMU_REG(0xA0), 0x00, 0x80 },
- { 0x00, 0xFF, NB_PMU_REG(0xA1), 0x00, 0xE0 },
- { 0x00, 0xFF, NB_PMU_REG(0xA2), 0x00, 0xD6 },
- { 0x00, 0xFF, NB_PMU_REG(0xA3), 0x00, 0x80 },
- { 0x00, 0xFF, NB_PMU_REG(0xA8), 0x00, 0x20 },
-
- // D0F5: NB APIC, PXPTRF and MSGC
- //Note: the Rx6A, RCRBH Base Address, is not set, which is related to PCIE Root Complex.
- //Note: the Rx60, Extended CFG Address. Support and Rx61, Extended CFG Address, are set by NB Peim that is in the PEI Phase.
- //Note: the Rx42, APIC Interrupt((BT_INTR)) Control, is set by NB Peim that is in PEI phase.
- { 0x00, 0xFF, NB_PXPTRF_REG(0x50), 0x00, 0x00 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x54), 0x00, 0x80 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x55), 0x00, 0x04 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x58), 0x00, 0x00 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x59), 0x00, 0x02 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x5E), 0x00, 0x00 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x5F), 0x00, 0x06 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x80), 0x00, 0x18 }, //Set RVC1DM, RTHBHIT, RUWRDYD, RUPRRDY1, RUWPOPHD to 1.
- { 0x00, 0xFF, NB_PXPTRF_REG(0x82), 0x00, 0x00 }, //Set RVC1RPSW, RVC1RQ1T to 1.
- { 0x00, 0xFF, NB_PXPTRF_REG(0x83), 0x00, 0x81 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0 },
- { 0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01 }, // RWAKEEN
- //{ 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00 }, //RTDNP2B32EN
- { 0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20 },
- { 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00 }, //RP2P1ABORT
-
-
-// fine-tune
-// If no settings, C7 will hang or reboot in XP, but CN will not.
- { 0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00 },
- { 0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03 },
- { 0x00, 0xFF, NB_HOST_REG(0x54), 0x04, 0x00 },
- { 0x00, 0xFF, NB_HOST_REG(0x55), 0x04, 0x00 },
- { 0x00, 0xFF, NB_HOST_REG(0x59), 0x09, 0x01 },
- { 0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10 },
- { 0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08 },
- { 0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04 }, // ACPI Base addr
- { 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01 }, // APIC MSI
- { 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00 }, // APIC MSI
- //GTL
- { 0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66 },
- { 0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33 },
- { 0x00, 0xFF, NB_HOST_REG(0xB3), 0xFF, 0x33 },
- { 0x00, 0xFF, NB_HOST_REG(0xBC), 0xFF, 0x33 },
- { 0x00, 0xFF, NB_HOST_REG(0xBD), 0xFF, 0x33 },
- { 0x00, 0xFF, NB_HOST_REG(0xC5), 0x30, 0x20 },
- { 0x00, 0xFF, NB_HOST_REG(0xC8), 0x10, 0x00 },
-
-
- // End of Table
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mBusControllerInitTable[] = {
- // D17F0: LPC
- { 0x00, 0xFF, SB_LPC_REG(0x40), 0x44, 0x44 }, // Enable I/O Recovery Time, 4D0/4D1 Support
- { 0x00, 0xFF, SB_LPC_REG(0x42), 0xF8, 0xF0 }, // ENLBUF, GINTREN, FLUSHEN, RBRSTRD
- { 0x00, 0xFF, SB_LPC_REG(0x43), 0x0F, 0x0B }, // RENDTX, ENWBTO, ENRBTO
- //{ 0x00, 0xFF, SB_LPC_REG(0x46), 0x00, 0x10 }, // It is related to INTH#
- //{ 0x00, 0xFF, SB_LPC_REG(0x48), 0x00, 0x0C }, //RMRPW, RIRPW // Reserved in 409 by Eric
-
- // Internal RTC, Mouse, Keyboard // set in PEI by Eric
- //{ 0x00, 0xFF, SB_LPC_REG(0x51), 0x10, 0x0D }, // Enable Internal RTC, Internal PS2 Mouse/Keyboard
-
- // RTC
- { 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x01 }, //RTC Rx32 Map to Centrury Byte
-
- //{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x02 }, // RDMEGAS
- //{ 0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08 }, // Enable RTC port 74/75, ENEXRTC // set in PEI by Eric
-
- // Serial IRQ // set in PEI by Eric
- //{ 0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09 }, // Enable Serial IRQ, Start Frame Width is 6 PCI Clock.
-
- // Enable 4D0h/4D1h Port
- //{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x04 }, // EISAXT // set in PEI by Eric
-
- // Config ROM Interface
- // Enable SPI/Set SPI Memory Base Address
- // It is initialized in PEI Phase
-
- // Subsystem ID/Vendor ID Back Door
- { 0x00, 0xFF, SB_LPC_REG(0x70), 0xFF, 0x06 },
- { 0x00, 0xFF, SB_LPC_REG(0x71), 0xFF, 0x11 },
- { 0x00, 0xFF, SB_LPC_REG(0x72), 0xFF, 0x09 },
- { 0x00, 0xFF, SB_LPC_REG(0x73), 0xFF, 0x34 },
-
- { 0x00, 0xFF, SB_LPC_REG(0x4C), 0xC0, 0x40 },
- { 0x00, 0xFF, SB_LPC_REG(0x5B), 0x00, 0x51 }, // Orgin value 0x53, modify for 409 by Eric
- { 0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01 },
-
-
- { 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00 }, // Setting PCI device enable
- { 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00 }, // Setting PCI device enable
- { 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00 }, // Setting HDAC enable
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mPCI1InitTable[] = {
- //PCI1 Programming Sequence
- //(1)Configure D17F7
- { 0x00, 0xFF, SB_VLINK_REG(0x04), 0x00, 0x03 },
- { 0x00, 0xFF, SB_VLINK_REG(0x0C), 0x00, 0x08 }, // Reserved in 409 by Eric
- { 0x00, 0xFF, SB_VLINK_REG(0x4F), 0x40, 0x41 }, //RENPPB, RP2CFLSH
- { 0x00, 0xFF, SB_VLINK_REG(0x77), 0x00, 0x48 }, //ROP2CFLSH, RFFTMR[1:0]. ROP2CFLSH work with Rx4F[0](RP2CFLSH) assertion
- // { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x80 }, //RSUB_DEC_P2P, RSUBDECOD(Window xp). If Bit7 is set, PCI lock will occured.
- // { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x81 }, //RSUB_DEC_P2P, RSUBDECOD(Window Vista)
- //(2)Configure D19F0
- { 0x00, 0xFF, SB_P2PB_REG(0x04), 0x00, 0x07 },
-
- //(3)Performance Recommended Setting
-
- //Save Power
- { 0x00, 0xFF, SB_VLINK_REG(0xE2), 0x1F, 0x01 },
- { 0x00, 0xFF, SB_VLINK_REG(0xE3), 0xF1, 0x5E },
- { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x40, 0x00 },
- //Enhence Host To PCI cycle performance and PCI-To-Host Cycle performance
- { 0x00, 0xFF, SB_VLINK_REG(0x70), 0x00, 0x82 },
- { 0x00, 0xFF, SB_VLINK_REG(0x71), 0x30, 0xC0 },
- { 0x00, 0xFF, SB_VLINK_REG(0x72), 0x00, 0xEE },
-
- //Cycle Control
- { 0x00, 0xFF, SB_VLINK_REG(0x73), 0x00, 0x01 },
- { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x0C },
- //Arbitration control
- { 0x00, 0xFF, SB_VLINK_REG(0x75), 0x00, 0x0F },
- { 0x00, 0xFF, SB_VLINK_REG(0x76), 0x00, 0xD0 },
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mCCAInitTable[] = {
- { 0x00, 0xFF, SB_VLINK_REG(0xFC), 0x02, 0x08 }, //RVWREQ, ROABKDOOR
-
- //CCA's Register Programming sequence
- { 0x00, 0xFF, SB_VLINK_REG(0x50), 0x00, 0x08 }, //Config Azalia's upstream cycle high priority and other low priority
- { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x40, 0x80 }, //Disable bypass asynchronous circuit
- { 0x00, 0xFF, SB_VLINK_REG(0x52), 0x00, 0x11 }, // Set SM Internal Device and HDAC Occupy Timer
- { 0x00, 0xFF, SB_VLINK_REG(0x53), 0x00, 0x11 }, // Set SM Internal Device and HDAC Promote Timer
- { 0x00, 0xFF, SB_VLINK_REG(0x54), 0xFF, 0x02 }, //Use SB internal devices's original REQ
- { 0x00, 0xFF, SB_VLINK_REG(0x73), 0x10, 0x00 }, //RPINOWSC. Enable APIC Cycle Block P2C Write Cycle
- { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x3C }, //RLCKXP2C, RFSBVK.
- { 0x00, 0xFF, SB_VLINK_REG(0xE1), 0x07, 0x00 }, //RBLKAPIC, RAZC3
- { 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x04, 0x02 }, //RNMIFSB, RFSBVK
- { 0x00, 0xFF, SB_VLINK_REG(0xE0), 0xF0, 0x90 }, //RCCA_NEWCLK, RCCA_CLKON. Use New dynamic clock scheme
- { 0x00, 0xFF, SB_VLINK_REG(0xE7), 0xFF, 0x00 }, //Let CCA use dynamic clock.
- //The CCA is also relate to D17F0
- //{ 0x00, 0xFF, SB_LPC_REG(0x49), 0x1F, 0x00 }, //Disable CCA Test Mode
- { 0x00, 0xFF, SB_LPC_REG(0x74), 0xFF, 0x00 }, // Let DMA cycles from internal devices directly go to NB // Reserved in 409 by Eric
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE IDEC_INIT[] = {
- //{0x00, 0xFF, SB_IDEC_REG(0x09), 0x00, 0x05}, //set to native mode
- {0x00, 0xFF, SB_IDEC_REG(0x04), 0x00, 0x07},
- //{0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F},
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-};
-
-static const struct VIA_PCI_REG_INIT_TABLE mSbApicInitTable[] = {
- { 0x00, 0xFF, SB_LPC_REG(0x4D), 0x04, 0x00 },
- { 0x00, 0xFF, SB_LPC_REG(0x5B), 0x0E, 0x00 },
- { 0x00, 0xFF, SB_LPC_REG(0x6C), 0x08, 0x00 },
- { 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x40 },
- { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x04 },
- //{ 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F },
- { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table
-};
-
-void AcpiInit(void)
-{
- device_t_raw rawdevice = 0;
- u8 sbchiprev;
- rawdevice = PCI_RAWDEV(0, 0x11, 0);
- // Set the PMIO base io address
- pci_rawmodify_config16(rawdevice, 0x88, VX800_ACPI_IO_BASE,
- 0xff80);
- // Enable PMIO
- pci_rawmodify_config16(rawdevice, 0x80, 0x8000, 0x8000);
- // Enable Soft Resume
- outw(inw(VX800_ACPI_IO_BASE + 0x04) | 0x8000,
- VX800_ACPI_IO_BASE + 0x04);
-
- // Get SB Revision
- sbchiprev = pci_rawread_config8(rawdevice, 0xf6);
- printk(BIOS_DEBUG, "SB chip revision =%x\n", sbchiprev);
-
- // Fill Register Table
- via_pci_inittable(sbchiprev, mSbStage1InitTbl);
-
- // Close all SMI/Io Traps
- outb(0x00, VX800_ACPI_IO_BASE + 0x42);
-}
-
-void Stage2NbInit(void)
-{
- device_t_raw rawdevice = 0;
- u8 nbchiprev;
- u32 subid = 0;
- rawdevice = PCI_RAWDEV(0, 0, 4);
- nbchiprev = pci_rawread_config8(rawdevice, 0xf6);
- printk(BIOS_DEBUG, "NB chip revision =%x\n", nbchiprev);
-
- via_pci_inittable(nbchiprev, mNbStage2InitTable);
-
- rawdevice = PCI_RAWDEV(0, 0, 0);
-
- subid = PCI_DEVICE_ID_VIA_VX855_D0F0 << 16 + PCI_VENDOR_ID_VIA;
- pci_rawwrite_config32(rawdevice, 0x2C, subid);
-
- //vx855 NB no pcie bus
- //vx855 NB no apic
-}
-
-void IDECSupportOption(u8 sbchiprev)
-{
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0, 0x08);
-
- pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x00, 0x80);
- pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x0A, 0x01, 0xFF);
- pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x80, 0x00);
- pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x40, 0x02, 0x00);
-
- pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x00, 0x05); //COMPATIBLE MODE
-// pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x05, 0x05);//native MODE
-
- via_pci_inittable(sbchiprev, IDEC_INIT);
-}
-
-void InitIDEC(u8 sbchiprev)
-{
- IDECSupportOption(sbchiprev);
-}
-
-void InitUHCI(u8 Number, u8 bEnable)
-{
- u8 Mask, Value;
- u16 D16;
- u8 BaseAddress;
- u8 BitShift;
- // USB Device 16
- // Function : Number
- // 0 : 0
- // 1 : 1
- // 2 : 2
- // The BitShift is got from Datasheet.
-
- switch (Number) {
- case 0:
- BaseAddress = 0;
- BitShift = 4;
- break;
- case 1:
- BaseAddress = 1;
- BitShift = 5;
- break;
- case 2:
- default:
- BaseAddress = 2;
- BitShift = 2;
- break;
- }
-
- if (bEnable) {
- Mask = 0x1 << BitShift;
- Value = 0x0;
- } else {
- Mask = 0x0;
- Value = 0x1 << BitShift;
- }
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask);
-
-
- if (bEnable) {
- D16 = 0;
- pci_rawwrite_config16(PCI_RAWDEV(0, 0x10, BaseAddress),
- 0x20, D16);
-
- // Config some Control Register
- Mask = 0x00;
- Value = 0x12;
-
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress),
- 0x41, Value, Mask);
- Mask = 0x00;
- Value = 0xEB;
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress),
- 0x4B, Value, Mask);
- }
- return;
-}
-
-static const struct VIA_PCI_REG_INIT_TABLE mEHCIInitTable[] = {
- //EHCI
- { 0x00, 0xFF, SB_EHCI_REG(0x43), 0x00, 0xC0 },
- { 0x00, 0xFF, SB_EHCI_REG(0x50), 0x00, 0x80 },
- { 0x00, 0xFF, SB_EHCI_REG(0x48), 0x20, 0x9E },
- { 0x00, 0xFF, SB_EHCI_REG(0x49), 0x10, 0x68 },
- { 0x00, 0xFF, SB_EHCI_REG(0x4B), 0x00, 0x69 },
- { 0x00, 0xFF, SB_EHCI_REG(0x4D), 0x00, 0x94 },
- { 0x00, 0xFF, SB_EHCI_REG(0x52), 0x08, 0x00 },
- { 0x00, 0xFF, SB_EHCI_REG(0x5A), 0x00, 0x8A },
- { 0x00, 0xFF, SB_EHCI_REG(0x5B), 0x00, 0x89 },
- { 0x00, 0xFF, SB_EHCI_REG(0x5C), 0x00, 0x03 },
- { 0x00, 0xFF, SB_EHCI_REG(0x5D), 0x00, 0x9A },
- { 0x00, 0xFF, SB_EHCI_REG(0x5E), 0x00, 0x00 },
- { 0x00, 0xFF, SB_EHCI_REG(0x6B), 0x00, 0x00 },
- { 0x00, 0xFF, SB_EHCI_REG(0x6D), 0x00, 0x00 },
- { 0x00, 0xFF, SB_EHCI_REG(0x6F), 0xF0, 0x00 },
- { 0x00, 0xFF, SB_EHCI_REG(0x4E), 0x01, 0x01 },
- { 0x00, 0xFF, SB_EHCI_REG(0x4F), 0x00, 0x11 },
- { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table
-};
-
-void InitEHCI(u8 Number, u8 bEnable)
-{
- u8 Mask, Value;
- u8 EHCIRevision;
-
- if (bEnable) {
- Mask = 0x1 << 1;
- Value = 0x0;
- } else {
- Mask = 0x0;
- Value = 0x1 << 1;
- }
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask);
-
-
- if (bEnable) {
- // Get Chipset Revision
- EHCIRevision =
- pci_rawread_config8(PCI_RAWDEV(0, 0x10, 4), 0xF6);
- printk(BIOS_DEBUG, "EHCI Revision =%x\n", EHCIRevision);
- via_pci_inittable(EHCIRevision, mEHCIInitTable);
- }
-}
-
-#define TRUE 1
-void InitUSBC(u8 sbchiprev)
-{
- InitUHCI(0, TRUE);
- InitUHCI(1, TRUE);
- InitUHCI(2, TRUE);
- InitEHCI(0, TRUE);
-}
-
-void WriteSbApicIndexedReg(u8 Idx, u32 Data)
-{
- u32 Data32;
- u32 ApicIdxAdr = VX800SB_APIC_BASE;
- u32 ApicDataAdr = VX800SB_APIC_BASE + VX800SB_APIC_DATA_OFFSET;
- *((u8 *) ApicIdxAdr) = Idx;
- Data32 = (*((u32 *) ApicDataAdr)); //this read is needed when write APIC ID ,dont know why.
- Data32 = Data;
- *((u32 *) ApicDataAdr) = Data32;
-}
-
-void SbApicMmioRegInit(void)
-{
- u32 Offset;
- WriteSbApicIndexedReg(3, 1);
- WriteSbApicIndexedReg(0, 4);
- for (Offset = 0x10; Offset < VX800SB_APIC_ENTRY_NUMBER;
- Offset += 2) {
- WriteSbApicIndexedReg(Offset + 1, 0);
- WriteSbApicIndexedReg(Offset, 0x10000);
- }
-}
-
-void SbApicInit(u8 sbchiprev)
-{
- via_pci_inittable(sbchiprev, mSbApicInitTable);
- SbApicMmioRegInit();
-}
-
-void SbAcpiInit(void)
-{
- u8 Mask, Value;
- // Enable ACPI
- Mask = 0x01;
- Value = 0x01;
- io_rawmodify_config8(VX800_ACPI_IO_BASE + 0x04, Value, Mask);
-}
-
-#define HPET_ENABLE_BIT 0x80
-#define R_SB_HPET_CONTROL 0x68
-#define HPET_BASE_ADDRESS 0xFED0 // 0xFED00000
-#define R_SB_HPET_ADDRESS 0x69
-
-void HpetInit(void)
-{
- u8 HpetEnable = HPET_ENABLE_BIT;
- u16 HpetBase = HPET_BASE_ADDRESS;
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_HPET_CONTROL,
- HpetEnable);
- pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0),
- R_SB_HPET_ADDRESS + 1, HpetBase);
-}
-
-static const struct VIA_PCI_REG_INIT_TABLE mPMUInitTable[] = {
- // Power Management
- { 0x00, 0xFF, SB_LPC_REG(0x80), 0x00, 0x20 },
- { 0x00, 0xFF, SB_LPC_REG(0x8C), 0x02, 0x00 },
- { 0x00, 0xFF, SB_LPC_REG(0x8D), 0x00, 0x18 },
-
- //Miscellaneous Configuration 1
- { 0x00, 0xFF, SB_LPC_REG(0x94), 0xF0, 0x28 },
- { 0x00, 0xFF, SB_LPC_REG(0x95), 0x00, 0xC1 },
- { 0x00, 0xFF, SB_LPC_REG(0x96), 0xFF, 0x10 },
- { 0x00, 0xFF, SB_LPC_REG(0x97), 0x00, 0xB2 },
-
- //Voltage Change Function Enable
- { 0x00, 0xFF, SB_LPC_REG(0x9F), 0x00, 0x21 },
- //Internal PCIe and NM PLL Control
- { 0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA },
-
- { 0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80 },
- { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table
-};
-
-void InitPMU(u8 sbchiprev)
-{
- u8 Mask, Value;
- // Set PMU Registers
- via_pci_inittable(sbchiprev, mPMUInitTable);
-
-
- // Set SCI IRQ and its level trigger
- Mask = 0x0F;
- Value = 0x09;
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x82, Value, Mask);
-
- Mask = 0x02;
- Value = 0x02;
- io_rawmodify_config8(0x4d1, Value, Mask);
-}
-
-#define R_SB_MULTI_FUNCTION_SELECT_1 0xE4
-#define R_SB_CX_STATE_BREAK_EVENT_ENABLE_1 0xE6
-#define PMIO_PROCESSOR_CONTROL 0x26
-#define R_SB_PCI_ARBITRATION_2 0x76
-#define R_SB_AUTO_SWITCH_P_STATE 0x8A
-
-void InitCPUCStatueSupport()
-{
- u8 Mask, Value;
-
- // Config Cx State
- // Now it is C2 & C4 Up Down Mode
- Mask = 0xFF;
- Value = 0x30;
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_CX_STATE_BREAK_EVENT_ENABLE_1, Value, Mask); //SB_LPC_REG
-
- Mask = 0xFF;
- Value = 0x1F;
- io_rawmodify_config8(VX800_ACPI_IO_BASE + PMIO_PROCESSOR_CONTROL,
- Value, Mask);
-
- Mask = 0x00;
- Value = 0x80;
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 7), R_SB_PCI_ARBITRATION_2, Value, Mask); //SB_VLINK_REG
-
- Mask = 0xFF;
- Value = 0x00;
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_MULTI_FUNCTION_SELECT_1, Value, Mask); //SB_VLINK_REG
-
- Mask = 0xFF;
- Value = 0x1F;
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_AUTO_SWITCH_P_STATE, Value, Mask); //SB_VLINK_REG
-}
-
-void InitSBPM(u8 sbchiprev)
-{
- InitPMU(sbchiprev);
- SbAcpiInit();
- InitCPUCStatueSupport();
-}
-
-void Stage2SbInit(void)
-{
- device_t_raw rawdevice = 0;
- u8 sbchiprev;
-
- rawdevice = PCI_RAWDEV(0, 11, 0);
- sbchiprev = pci_rawread_config8(rawdevice, 0xf6);
- printk(BIOS_DEBUG, "SB chip revision =%x\n", sbchiprev);
-
- //SBBasicInit
- via_pci_inittable(sbchiprev, mBusControllerInitTable);
- via_pci_inittable(sbchiprev, mPCI1InitTable);
- via_pci_inittable(sbchiprev, mCCAInitTable);
-
-
- InitIDEC(sbchiprev);
-
- InitUSBC(sbchiprev);
-
- InitSBPM(sbchiprev);
-
- SbApicInit(sbchiprev);
-
- HpetInit();
-
- //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0);//SB_VLINK_REG
-
-}
-
-void init_VIA_chipset(void)
-{
- printk(BIOS_DEBUG, "In: init_VIA_chipset\n");
- //1.nbstage1 is done in raminit.
- //2.sbstage1
- AcpiInit();
- //3.nbstage2
- Stage2NbInit();
-
- //4.sbstage2
- Stage2SbInit();
-
- //5.open hdac
- pci_rawmodify_config32(PCI_RAWDEV(0, 0x11, 7), 0xd1, 0, 0x04);
- printk(BIOS_DEBUG, "End: init_VIA_chipset\n");
-}
-
-/**
- * @brief Main function of the DRAM part of coreboot.
- *
- * Coreboot is divided into Pre-DRAM part and DRAM part.
- *
- *
- * Device Enumeration:
- * In the dev_enumerate() phase,
- */
-
-void main(void)
-{
- struct lb_memory *lb_mem;
-#if CONFIG_HAVE_ACPI_RESUME
- void *wake_vec;
-#endif
-
- u16 tmp;
- tmp = inw(VX800_ACPI_IO_BASE + 0x04);
- acpi_sleep_type = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0;
-
- u8 y, x;
- init_VIA_chipset();
- printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-
-#if 0
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xa3, 0x80);
- pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0x60, 0x20);
- pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0xE5,
- pci_rawread_config8(PCI_RAWDEV(0, 3, 0),
- 0x88));
-#endif
-
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x51, 0x40, 0x40); //close CE-ATA (Consumer Electronics-ATA) and NFC
-
- //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x0, 0x40);//open USB Device Mode Enable
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x40, 0x40); //close USB Device Mode
-
- //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x04, 0x04);//close USB 1.1 UHCI Port 4-5
- //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x02, 0x02);//close USB 2.0 ehci
-
-
- //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x00, 0x76);//open all usb and usb mode
- //pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0x76);//close all usb
-
- printk(BIOS_INFO, "=================SB 50h=%02x \n",
- pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x50));
-
- /* FIXME: Is there a better way to handle this? */
- init_timer();
- printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-
- /* Find the devices we don't have hard coded knowledge about. */
- dev_enumerate();
- printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-#if 0
- x = y = 0;
- printk(BIOS_INFO, "dump ehci3 \n");
- for (; x < 16; x++) {
- y = 0;
- for (; y < 16; y++) {
- printk(BIOS_INFO, "%02x ",
- pci_rawread_config8(PCI_RAWDEV
- (0, 0x10, 4),
- x * 16 + y));
- }
- printk(BIOS_INFO, "\n");
- }
-#endif
-
- post_code(0x66);
- /* Now compute and assign the bus resources. */
- dev_configure();
- printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-#if 0
- x = y = 0;
- printk(BIOS_INFO, "dump ehci3 \n");
- for (; x < 16; x++) {
- y = 0;
- for (; y < 16; y++) {
- printk(BIOS_INFO, "%02x ",
- pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
- }
- printk(BIOS_INFO, "\n");
- }
-#endif
-
- post_code(0x88);
- /* Now actually enable devices on the bus */
- dev_enable();
- printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
- /* And of course initialize devices on the bus */
-#if 0
- x = y = 0;
- printk(BIOS_INFO, "dump ehci3 \n");
- for (; x < 16; x++) {
- y = 0;
- for (; y < 16; y++) {
- printk(BIOS_INFO, "%02x ",
- pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
- }
- printk(BIOS_INFO, "\n");
- }
-#endif
-
- dev_initialize();
- post_code(0x89);
- printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-
-// pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, 0x0571);
-
-#if 0
- x = y = 0;
- printk(BIOS_INFO, "dump ehci3 \n");
- for (; x < 16; x++) {
- y = 0;
- for (; y < 16; y++) {
- printk(BIOS_INFO, "%02x ",
- pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
- }
- printk(BIOS_INFO, "\n");
- }
-#endif
-
-#if 0
- y = pci_rawread_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d);
- y &= 0x0f;
- y |= 0x40;
- pci_rawwrite_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d, y);
-#endif
-
-#if 0
- static const d0f0pcitable[5] = { 0xD0, 0, 0, 0, 0xFD };
- static const d0f2pcitable[16 * 7 + 1] = {
- 0x88, 0xF8, 0xEF, 0x44, 0x7C, 0x24, 0x63, 0x01, 0x00, 0x09,
- 0x00, 0x00, 0x10, 0xA2, 0x88, 0xCE,
- 0xFF, 0x0F, 0x00, 0xAA, 0x0A, 0x00, 0x00, 0x00, 0x01, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0xCC, 0x66, 0xAA, 0x55, 0x30, 0x38, 0x0C, 0x00, 0x00, 0x00,
- 0x00, 0x22, 0x00, 0xAA, 0x00, 0x00,
- 0x44, 0x44, 0x55, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x0B, 0x00, 0x08, 0x00, 0x00, 0x00, 0x0A, 0x01, 0x41, 0x06,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x88, 0x56, 0x70, 0x77, 0x77, 0x07, 0x77, 0x77, 0x04,
- 0x77, 0x77, 0x77, 0x77, 0x77, 0x77,
- 0x77, 0x77, 0x33, 0x33, 0x77, 0x77, 0x77, 0x77, 0x77, 0x77,
- 0x77, 0x77, 0x44, 0x44, 0x14, 0x00,
- 0x75
- };
-
- static const d0f4pcitable[16 * 6 + 3] = {
- 0x30, 0x00, 0x00,
- 0xFF, 0xFF, 0xCC, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x80, 0xE0, 0xD6, 0x80, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x04, 0x00, 0x00, 0x04, 0x04,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x12, 0x12, 0x00, 0x00, 0x08, 0xF4,
- 0x01, 0x01, 0x79, 0x79, 0x0A, 0x00,
- };
- static const d0f5pcitable[16 * 10] = {
- 0x13, 0x0E, 0x00, 0x00, 0xD2, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x18, 0x9A, 0x00, 0x81, 0x28, 0xC0, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x40, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x26, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- };
-
- static const d0f7pcitable[16 * 9] = {
- 0x00, 0x2A, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x29, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- };
- static const d1f0pcitable[3] = {
- 0x01, 0x80, 0x40
- };
-
- static const dcf0pcitable[96] = {
- 0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x00, 0xC2, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
- 0x40, 0x01, 0x03, 0x01, 0x7E, 0x01,
- 0x08, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF9,
- 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
- };
-
- static const d10f4pcitable[48] = {
- 0x00, 0x20, 0x43, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x9E, 0x68,
- 0x00, 0x09, 0x13, 0x94, 0x03, 0x10,
- 0x80, 0x60, 0x11, 0xBF, 0x00, 0xFF, 0x0F, 0x00, 0x04, 0x0B,
- 0xCC, 0xCC, 0x00, 0xCC, 0x00, 0x00,
- 0x20, 0x20, 0x01, 0x00, 0x05, 0x00, 0x00, 0x00, 0x01, 0x00,
- 0x00, 0x00, 0x00, 0x20, 0x00, 0xC0,
- };
-
- static const d11f0pcitable[16 * 12] = {
- 0x44, 0x40, 0xF0, 0x0B, 0x00, 0x00, 0x00, 0x03, 0x00, 0x20,
- 0x00, 0x00, 0x04, 0x00, 0x08, 0x00,
- 0xC1, 0x4D, 0x19, 0x80, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x51, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x80, 0x00,
- 0xD0, 0xFE, 0x00, 0x00, 0x00, 0x00,
- 0x06, 0x11, 0x09, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
- 0x20, 0x84, 0x49, 0x00, 0x88, 0x00, 0x00, 0x00, 0x01, 0x08,
- 0x1F, 0x00, 0x07, 0x1A, 0x00, 0x00,
- 0x00, 0x6E, 0xBC, 0x88, 0x28, 0xC1, 0x10, 0x80, 0x00, 0x80,
- 0x20, 0x88, 0x00, 0x00, 0x00, 0xAD,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00,
- 0x00, 0x00, 0x10, 0xD0, 0xFE, 0x90,
- 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0xE7, 0x03, 0xA0, 0x60, 0x20, 0xC0, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x04, 0x00, 0x00, 0x00,
- };
-
- static const d11f7pcitable[192] = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x80, 0x43,
- 0x08, 0x80, 0x11, 0x11, 0x02, 0x0F, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x80, 0x00, 0x00, 0x20, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x80, 0x00, 0x00, 0x00, 0x00,
- 0x82, 0xC8, 0xEE, 0x01, 0x0C, 0x0F, 0xD0, 0x48, 0x00, 0x00,
- 0x00, 0x00, 0x02, 0x00, 0x00, 0x00,
- 0x07, 0x00, 0x21, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x93, 0x08, 0x00, 0x5E, 0x00, 0x80, 0x29, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x48, 0x00, 0x00, 0x00,
- };
-
-#define OPTION_1 1
-#define NOOPTION_1 1
-#ifdef OPTION_1
- static const OPTION_1_d11f0pcitable[16 * 12] = {
- 0x44, 0x80, 0xf0, 0x0b, 0x00, 0x00, 0x00, 0x03, 0x00, 0x20,
- 0x00, 0x00, 0x04, 0x01, 0x08, 0x00,
- 0xc0, 0x4d, 0x19, 0x80, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00,
- 0x00, 0x53, 0x00, 0xfe, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x80, 0x00,
- 0xd0, 0xfe, 0x00, 0x00, 0xdf, 0x00,
- 0x06, 0x11, 0x53, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x20, 0x84, 0x4a, 0x00, 0xda, 0x40, 0x00, 0x00, 0x01, 0x40,
- 0x1f, 0x00, 0x07, 0x18, 0x00, 0x00,
- 0x00, 0x2e, 0xbc, 0x00, 0x28, 0xc1, 0x10, 0x80, 0x00, 0x80,
- 0x08, 0x88, 0x00, 0x00, 0x00, 0xad,
- 0x06, 0x11, 0x53, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x40, 0x80, 0x40,
- 0x00, 0x00, 0x00, 0xd3, 0xfe, 0x53,
- 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x41, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0xeb, 0x03, 0xa0, 0x60, 0x20, 0x80, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x04, 0x00, 0x00, 0x00,
- };
-#endif
-
- u8 i;
-/* error form ---- but add the chance to resume
- for(i=0;i<5;i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i, d0f0pcitable[i+0xcb]);
- }
-*/
-
-/* RO reg
- for(i=0;i<5;i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i+0xcb, d0f0pcitable[i]);
- }
-*/
-
-//boot ok, resume still err in linux
-#if 1
- for (i = 0; i < 9; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
- d0f2pcitable[i]);
- }
- //9 is warm reset reg, // boot err in coreboot
- for (i = 10; i < 64; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
- d0f2pcitable[i]);
- }
- //0x90 look d0f2 appendixA1 , if set this to 09 or 0b, then some ddr2 will crash.
- for (i = 65; i < 113; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
- d0f2pcitable[i]);
- }
-#endif
-#ifdef OPTION_1
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x66, 0x09);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x70, 0xdd);
- // pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x90, 0x09);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x92, 0x40);
-
-#endif
-
-
-
-#if 1
-
-
-//d0f3
-/* */
- // pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x3b); setting, my lspci is 0x29
- //set bit4 cause the ide not be found
-// pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x2b);
- //set bit1 cause the ide not be found
-
-// pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x29);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x95, 0x05);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x99, 0x12);
-
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xde, 0x00);
-#endif
-
-//boot ok, resume err in coreboot
-#if 1
- for (i = 0; i < 99; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), i + 0x8d,
- d0f4pcitable[i]);
- }
-#endif
-
-#ifdef OPTION_1
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xe9, 0x90);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xec, 0x0);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xed, 0x0);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xee, 0x0);
-#endif
-
-
-#if 1
-//boot ok, resume still err in linux
- for (i = 0; i < 160; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 5), i + 0x60,
- d0f5pcitable[i]);
- }
- for (i = 0; i < 144; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), i + 0x60,
- d0f7pcitable[i]);
- }
- for (i = 0; i < 3; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 1, 0), i + 0xb0,
- d1f0pcitable[i]);
- }
- for (i = 0; i < 96; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), i + 0x40,
- dcf0pcitable[i]);
- }
-#endif
-
-#ifdef OPTION_1
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x61, 0x0);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x63, 0x0);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x76, 0xd0);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x88, 0x81);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x89, 0x01);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x8A, 0x60);
-#endif
-
-//d15f0
-
-#if 1
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 0), 0x4a, 0xa2); // no affect.
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 1), 0x4a, 0xa2);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 2), 0x4a, 0xa2);
-
-//boot ok, resume still err in linux, and if disable USB, then all ok
-// for(i=0;i<48;i++){
- for (i = 0; i < 44; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), i + 0x40,
- d10f4pcitable[i]);
- }
-#endif
-
-//#ifdef NOOPTION_1
-#if 0
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6b, 0x01);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6d, 0x00);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6e, 0x08);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6f, 0x80);
-#endif
-
-#if 1
-//before (11.0)is add, s3 resume has already always dead in first resume(more frequenly), and sleep ok
-// for(i=0;i<192;i++){
- for (i = 0; i < 6; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
- //6 is uart and dvp vcp, will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail
-
- //7-18 is my familar part
- for (i = 7; i < 18; i++) { //sleep ok ,resume sleep err 2
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
-
- for (i = 18; i < 21; i++) { //sleep ok , sleep err 1, resume
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
- //0x55 56 57 irq intA#B#C# linkA#linkB#linkC#
- for (i = 24; i < 27; i++) { //sleep ok , resume sleep err 1 resume 1
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
- //5b port 80h
- pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x5b, 0x0, 0x08);
- // i++;
- // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i+0x40, d11f0pcitable[i]);
-
- for (i = 28; i < 72; i++) { //sleep ok , resume sleep err 1 , resume 1ci
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
- //7273ACPI BASE
-
- for (i = 74; i < 112; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
-
- //B0B4B5 dvp vcp, if copy this ,then no uart, no gui(of unbuntu)
- // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, d11f0pcitable[112]);
- i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0);
- //multiplex with VCP
- // i = i | 0x30;
- i = i & 0xf7;
- pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i);
-
-
-
- for (i = 113; i < 114; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
-
- for (i = 115; i < 116; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
-
-
- for (i = 118; i < 192; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
-#endif
-#ifdef NOOPTION_1
-// for(i=0;i<192;i++){
- for (i = 0; i < 6; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- OPTION_1_d11f0pcitable[i]);
- }
- //6 is uart and dvp vcp, will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail
-
- //7-18 is my familar part
- for (i = 7; i < 18; i++) { // sleep err 2
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- OPTION_1_d11f0pcitable[i]);
- }
-
- for (i = 18; i < 21; i++) { //sleep ok , resume ???
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
- //0x55 56 57 irq intA#B#C# linkA#linkB#linkC#
- for (i = 24; i < 27; i++) { //sleep ok , resume ???
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- d11f0pcitable[i]);
- }
- //5b port 80h
- i++;
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- OPTION_1_d11f0pcitable[i]);
-
- for (i = 28; i < 72; i++) { //sleep ok , resume???
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- OPTION_1_d11f0pcitable[i]);
- }
- //7273ACPI BASE
-
- for (i = 74; i < 112; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- OPTION_1_d11f0pcitable[i]);
- }
-
- //B0B4B5 dvp vcp, if copy this ,then no uart, no gui(of unbuntu)
- // pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, OPTION_1_d11f0pcitable[112]);
- i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0);
- //multiplex with VCP
- // i = i | 0x30;
- i = i & 0xf7;
- pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i);
-
-
-
- for (i = 113; i < 114; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- OPTION_1_d11f0pcitable[i]);
- }
-
- for (i = 115; i < 116; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- OPTION_1_d11f0pcitable[i]);
- }
-
- for (i = 118; i < 192; i++) { //boot ok, resume still err in linux
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
- OPTION_1_d11f0pcitable[i]);
- }
-#endif
-
-#if 1
- pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, PCI_DEVICE_ID_VIA_VX855_IDE); //5324
- pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBE,
- PCI_DEVICE_ID_VIA_VX855_IDE);
- pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA0,
- PCI_VENDOR_ID_VIA);
- pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA2, PCI_DEVICE_ID_VIA_VX855_LPC); //8353
- i = pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x79);
- i &= ~0x40;
- i |= 0x40;
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0x79, i);
- pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0x72,
- PCI_DEVICE_ID_VIA_VX855_LPC);
-
-//boot ok, resume still err in linux
- for (i = 0; i < 192; i++) {
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), i + 0x40,
- d11f7pcitable[i]);
- }
-#endif
-#ifdef OPTION_1
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x61, 0x2a);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x63, 0xa0);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x64, 0xaa);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x84, 0x0);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x88, 0x02);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0xe6, 0x3f);
-#endif
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x20);
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x41, 0x31);
-
-#ifdef OPTION_1
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x00);
-#endif
-#endif
-
- u8 i911;
- //disable CHB L.L
- //set VGA memory selection
- i911 = pci_rawread_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0);
- i911 &= 0xF8;
- //ByteVal |= 0x03;
- i911 |= 0x01;
- pci_rawwrite_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0, i911);
-
-#if 1
- struct device *dev;
- printk(BIOS_INFO, "========= dump all devices...\n");
- for (dev = all_devices; dev; dev = dev->next) {
- if (dev->path.type == DEVICE_PATH_PCI) {
- printk(BIOS_DEBUG, "%s dump\n", dev_path(dev));
- x = y = 0;
- for (; x < 16; x++) {
- y = 0;
- for (; y < 16; y++) {
- printk(BIOS_INFO, "%02x ",
- pci_read_config8(dev, x * 16 + y));
- }
- printk(BIOS_INFO, "\n");
- }
- }
- printk(BIOS_INFO, "\n");
- }
-#endif
- //pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x04, 0x17, 0x17);//
- //pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);///
-}
diff --git a/src/northbridge/via/vx800/examples/driving_clk_phase_data.c b/src/northbridge/via/vx800/examples/driving_clk_phase_data.c
deleted file mode 100644
index c62de6ed22..0000000000
--- a/src/northbridge/via/vx800/examples/driving_clk_phase_data.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
- #include "northbridge/via/vx800/driving_clk_phase_data.h"
-
-// DQS Driving
-//Reg0xE0, 0xE1
-// According to #Bank to set DRAM DQS Driving
-// #Bank 1 2 3 4 5 6 7 8
-static const u8 DDR2_DQSA_Driving_Table[4] = { 0xEE, 0xEE, 0xEE, 0xEE};
-static const u8 DDR2_DQSB_Driving_Table[2] = { 0xEE, 0xEE};
-
-// DQ Driving
-//Reg0xE2, 0xE3
-// For DDR2: According to bank to set DRAM DQ Driving
-static const u8 DDR2_DQA_Driving_Table[4] = { 0xAC, 0xAC, 0xAC, 0xAC };
-static const u8 DDR2_DQB_Driving_Table[2] = { 0xCA, 0xCA };
-
-
-// CS Driving
-//Reg0xE4, 0xE5
-// According to #Bank to set DRAM CS Driving
-// DDR1 #Bank 1 2 3 4 5 6 7 8
-static const u8 DDR2_CSA_Driving_Table_x8[4] = { 0x44, 0x44, 0x44, 0x44 };
-static const u8 DDR2_CSB_Driving_Table_x8[2] = { 0x44, 0x44};
-static const u8 DDR2_CSA_Driving_Table_x16[4]= { 0x44, 0x44, 0x44, 0x44};
-static const u8 DDR2_CSB_Driving_Table_x16[2]= { 0x44, 0x44};
-// MAA Driving
-//Reg0xE8, Reg0xE9
-static const u8 DDR2_MAA_Driving_Table[MA_Table][5] =
- {
- //Chip number, 400, 533, 667 800 ;(SRAS, SCAS, SWE)RxE8
- { 6, 0x86, 0x86, 0x86, 0x86}, // total MAA chips = 00 ~ 06
- { 18, 0x86, 0x86, 0x86, 0x86}, // total MAA chips = 06 ~ 18
- {255, 0xDB, 0xDB, 0xDB, 0xDB} // total MAA chips = 18 ~
- };
-
-static const u8 DDR2_MAB_Driving_Table[MA_Table][2] =
- {
- // Chip number, Value ;(SRAS, SCAS, SWE)RxE9
- { 6, 0x86 }, // total MAB chips = 00 ~ 06
- { 18, 0x86 }, // total MAB chips = 06 ~ 18
- {255, 0xDB } // total MAB chips = 18 ~
- };
-
-// DCLK Driving
-//Reg0xE6, 0xE7
-// For DDR2: According to #Freq to set DRAM DCLK Driving
-// freq 400M, 533M, 667M, 800M
-
-static const u8 DDR2_DCLKA_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF };
-static const u8 DDR2_DCLKB_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF };
-
-/*
-Duty cycle
-Duty cycle Control for DQ/DQS/DDRCKG in ChA & ChB
-D0F3RxEC/D0F3RxED/D0F3RxEE/D0F3RxEF
-According to DRAM frequency to control Duty Cycle
-*/
-static const u8 ChA_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0xEC, 0x00, 0x30, 0x30, 0x30, 0x30 }, // 1Rank
- {0xEE, 0x0F, 0x40, 0x40, 0x00, 0x00 },
- {0xEF, 0xCF, 0x00, 0x30, 0x30, 0x30}
- };
-
-static const u8 ChB_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0xED, 0x00, 0x88, 0x88, 0x84, 0x88 }, // 1Rank
- {0xEE, 0xF0, 0x00, 0x00, 0x00, 0x00 },
- {0xEF, 0xFC, 0x00, 0x00, 0x00, 0x00 }
- };
-
-
-/*
-DRAM Clock Phase Control for FeedBack Mode
-Modify NB Reg: Rx90[7]/Rx91/Rx92/Rx93/Rx94
-Processing:
- 1.Program VIA_NB3DRAM_REG90[7]=0b for FeedBack mode
- 2.Program clock phase value with ChA/B DCLK enable, VIA_NB3DRAM_REG91[7:3]=00b
- 3.Check ChB rank #, if 0, VIA_NB3DRAM_REG91[7]=1b, to disable ChB DCLKO
- ChA DCLKO can not be disable, so always program VIA_NB3DRAM_REG91[3]=0b
- */
-static const u8 DDR2_ChA_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x91, 0xF8, 0x02, 0x01, 0x00, 0x07 }, // 1Rank
- {0x92, 0xF8, 0x04, 0x03, 0x03, 0x02 },
- {0x93, 0xF8, 0x06, 0x05, 0x04, 0x03 }
- };
-
-static const u8 DDR2_ChB_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x91, 0x0F, 0x20, 0x10, 0x00, 0x70 }, // 1Rank
- {0x92, 0x0F, 0x40, 0x30, 0x30, 0x20 },
- {0x93, 0x0F, 0x60, 0x50, 0x40, 0x30 }
- };
-
-/*static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x91, 0xF8, 0x04, 0x03, 0x04, 0x01 }, // 1Rank
- {0x92, 0xF8, 0x03, 0x06, 0x05, 0x04 },
- {0x93, 0xF8, 0x03, 0x07, 0x06, 0x05 }
- };*/
-
-static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x91, 0xF8, 0x02, 0x01, 0x00, 0x07}, // 1Rank
- {0x92, 0xF8, 0x04, 0x03, 0x03, 0x02 },
- {0x93, 0xF8, 0x06, 0x05, 0x04, 0x03 }
- };
-
-/*
-DRAM Write Data phase control
-Modify NB Reg: Rx74/Rx75/Rx76
-*/
-/*static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x74, 0xF8, 0x03, 0x04, 0x05, 0x02 }, // 1Rank
- {0x75, 0xF8, 0x03, 0x04, 0x05, 0x02 },
- {0x76, 0x00, 0x10, 0x80, 0x00, 0x07 }
- };*/
-
-static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x74, 0xF8, 0x01, 0x00, 0x00, 0x07 }, // 1Rank
- {0x75, 0xF8, 0x01, 0x00, 0x00, 0x07 },
- {0x76, 0x10, 0x80, 0x87, 0x07, 0x06 },
- {0x8C, 0xFC, 0x03, 0x03, 0x03, 0x03 }
- };
-
-/*static const u8 DDR2_ChB_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x74, 0x8F, 0x30, 0x40, 0x30, 0x20 }, // 1Rank
- {0x75, 0x8F, 0x30, 0x40, 0x30, 0x20 },
- {0x8A, 0x00, 0x10, 0x80, 0x07, 0x07 }
- };
-*/
-/*
-DQ/DQS Output Delay Control
-Modify NB D0F3: RxF0/RxF1/RxF2/RxF3
-*/
-static const u8 DDR2_CHA_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] =
- {
- // RxF0 RxF1 RxF2 RxF3
- { 0x00, 0x00, 0x00, 0x00 },// DDR400
- { 0x00, 0x00, 0x00, 0x00 },// DDR533
- { 0x00, 0x00, 0x00, 0x00 },// DDR667
- { 0x00, 0x00, 0x00, 0x00 }// DDR800
- };
-static const u8 DDR2_CHB_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] =
- {
- // RxF4 RxF5 RxF6 RxF7
- { 0x00, 0x00, 0x00, 0x00 },// DDR400
- { 0x00, 0x00, 0x00, 0x00 },// DDR533
- { 0x00, 0x00, 0x00, 0x00 },// DDR667
- { 0x00, 0x00, 0x00, 0x00 }// DDR800
- };
-
-/*
-DQ/DQS input Capture Control
-modify NB D0F3_Reg:Rx78/Rx79/Rx7A/Rx7B
-*/
-
-/*static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x78, 0x00, 0x83, 0x8D, 0x87, 0x83 }, // 1Rank
- {0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00 },
- {0x7B, 0x00, 0x10, 0x30, 0x20, 0x10 }
- };*/
-
-
-static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x78, 0xC0, 0x0D, 0x07, 0x03, 0x01 }, // 1Rank
- {0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00 },
- {0x7B, 0x00, 0x34, 0x34, 0x20, 0x10 }
- };
-
-static const u8 DDR2_ChB_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] =
- {
- // (And NOT) DDR800 DDR667 DDR533 DDR400
- //Reg Mask Value Value Value Value
- {0x79, 0x00, 0x89, 0x89, 0x87, 0x83 }, // 1Rank
- {0x7A, 0x0F, 0x00, 0x00, 0x00, 0x00 },
- {0x8B, 0x00, 0x34, 0x34, 0x20, 0x10 }
- };
-
-static const u8 Fixed_DQSA_1_2_Rank_Table[4][2] =
-{
-// Rx70 Rx71
- { 0x00, 0x05 }, // DDR800
- { 0x00, 0x06 }, // DDR667
- { 0x00, 0x04 }, // DDR533
- { 0x00, 0x05 } // DDR400
-};
-static const u8 Fixed_DQSA_3_4_Rank_Table[4][2] =
-{
-// Rx70 Rx71
- {0x00 , 0x04}, // DDR800
- {0x00 , 0x04}, // DDR667
- {0x00 , 0x03}, // DDR533
- {0x00 , 0x04} // DDR400
-};
diff --git a/src/northbridge/via/vx800/examples/romstage.c b/src/northbridge/via/vx800/examples/romstage.c
deleted file mode 100644
index c96511e2c9..0000000000
--- a/src/northbridge/via/vx800/examples/romstage.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include "console/console.c"
-#include "lib/ramtest.c"
-#include "northbridge/via/vx800/vx800.h"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include "pc80/udelay_io.c"
-#include "lib/delay.c"
-#include "lib/memcpy.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "driving_clk_phase_data.c"
-#include "northbridge/via/vx800/raminit.h"
-#include "northbridge/via/vx800/raminit.c"
-
-static int acpi_is_wakeup_early_via_vx800(void)
-{
- device_t dev;
- u16 tmp, result;
-
- print_debug("In acpi_is_wakeup_early_via_vx800\n");
- /* Power management controller */
- dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_VX855_LPC), 0);
-
- if (dev == PCI_DEV_INVALID)
- die("Power management controller not found\n");
-
- /* Set ACPI base address to I/O VX800_ACPI_IO_BASE. */
- pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 0x1);
-
- /* Enable ACPI access RTC signal gated with PSON. */
- pci_write_config8(dev, 0x81, 0x84);
-
- tmp = inw(VX800_ACPI_IO_BASE + 0x04);
- result = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0;
- print_debug(" boot_mode=");
- print_debug_hex16(result);
- print_debug("\n");
- return result;
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-static void enable_mainboard_devices(void)
-{
- device_t dev;
- uint16_t values;
-
- print_debug("In enable_mainboard_devices \n");
-
- /* Enable P2P bridge Header for external PCI bus. */
- dev = pci_locate_device(PCI_ID(0x1106, 0xa353), 0);
- pci_write_config8(dev, 0x4f, 0x41);
-}
-
-static void enable_shadow_ram(void)
-{
- uint8_t shadowreg;
-
- pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0xff);
- /* 0xf0000-0xfffff - ACPI tables */
- shadowreg = pci_read_config8(PCI_DEV(0, 0, 3), 0x83);
- shadowreg |= 0x30;
- pci_write_config8(PCI_DEV(0, 0, 3), 0x83, shadowreg);
- /* 0xe0000-0xeffff - elfload? */
-
- pci_write_config8(PCI_DEV(0, 0, 3), 0x82, 0xff);
-}
-
-/*
-this table contains the value needed to be set before begin to init dram.
-Note: REV_Bx should be cared when porting a new board!!!!! */
-static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = {
- //VT3409 no pcie
- 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E, // Set Exxxxxxx as pcie mmio config range
- 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B, // Support extended cfg address of pcie
- //0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02, // APIC Interrupt((BT_INTR)) Control
- // Set ROMSIP value by software
-
- /*0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pullup Driving = 3
- 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pulldown Driving = 3
- 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pullup Driving = 3
- 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pulldown Driving = 3
- 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21, // Memory I/F timing ctrl
- 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1, // Memory I/F timing ctrl
- 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18, // AGTL+ I/O Circuit
- 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C, // AGTL+ Compensation Status
- 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33, // 2X AGTL+ Auto Compensation Offset
- 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33, // 4X AGTL+ Auto Compensation Offset
- 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72, // AGTL Compensation Status
- 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77, // AGTL Compensation Status
- 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44, // Input Host Address / Host Strobe Delay Control for HA Group
- 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22, // Input Host Address / Host Strobe Delay Control for HA Group
- 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00, // Output Delay Control of PAD for HA Group
- 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA, // Host Address / Address Clock Output Delay Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44, // Host Data Receiving Strobe Delay Ctrl 1
- 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44, // Host Data Receiving Strobe Delay Ctrl 2
- 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00, // Output Delay of PAD for HDSTB
- 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00, // Output Delay of PAD for HD
- 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 0)
- 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 1)
- 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 2)
- 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 3) */
-
-
- // CPU Host Bus Control
- 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08, // Request phase ctrl: Dynamic Defer Snoop Stall Count = 8
- //0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW
- 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW
- 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB, // CPU I/F Ctrl-2: Enable all for performance
- //0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK
- 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44, // Arbitration: Host/Master Occupancy timer = 4*4 HCLK
- 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C, // Misc Ctrl: Enable 8QW burst Mem Access
- //0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06, // Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04, // Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63, // Write Policy 1
- //0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL
- //0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00, // CPU Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2, // Write Policy
- 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88, // Bandwidth Timer
- 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46, // CPU Misc Ctrl
- // 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B, // CPU Miscellaneous Control 3
- //0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B, // CPU Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A, // CPU Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41, // CPU Miscellaneous Control 3
- 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06, // CPU Miscellaneous Control 4
-
-
- // Set APIC and SMRAM
- 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00, // APIC Related Control
- 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29, // SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg
- 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // End of the table
-};
-
-#define USE_VCP 1 //0 means use DVP
-#define USE_COM1 1
-#define USE_COM2 0
-
-#define gCom1Base 0x3f8
-#define gCom2Base 0x2f8
-
-void EmbedComInit(void)
-{
- u8 ByteVal;
- u16 ComBase;
-
- //enable NB multiple function control
- ByteVal = pci_read_config8(PCI_DEV(0, 0, 0), 0x4f);
- ByteVal = ByteVal | 0x01;
- pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, ByteVal);
-
- //VGA Enable
- ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA1);
- ByteVal = ByteVal | 0x80;
- pci_write_config8(PCI_DEV(0, 0, 3), 0xA1, ByteVal);
-
- ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA7);
- ByteVal = ByteVal | 0x08;
- pci_write_config8(PCI_DEV(0, 0, 3), 0xA7, ByteVal);
-
- //Enable p2p IO/mem
- ByteVal = pci_read_config8(PCI_DEV(0, 1, 0), 0x4);
- ByteVal = ByteVal | 0x07;
- pci_write_config8(PCI_DEV(0, 1, 0), 0x4, ByteVal);
-
- //Turn on Graphic chip IO port port access
- ByteVal = inb(0x3C3);
- ByteVal = ByteVal | 0x01;
- outb(ByteVal, 0x3C3);
-
- //Turn off Graphic chip Register protection
- outb(0x10, 0x3C4);
- ByteVal = inb(0x3C5);
- ByteVal = ByteVal | 0x01;
- outb(ByteVal, 0x3C5);
-
- //south module pad share enable 0x3C5.78[7]
- outb(0x78, 0x3C4);
- ByteVal = inb(0x3C5);
- ByteVal = ByteVal | 0x80;
- outb(ByteVal, 0x3C5);
-
- //enable UART Function multiplex with DVP or VCP pad D17F0Rx46[7,6]
- ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0x46);
- //multiplex with VCP
- if (USE_VCP == 1)
- ByteVal = (ByteVal & 0x3F) | 0x40;
- //multiplex with DVP
- else
- ByteVal = (ByteVal & 0x3F) | 0xC0;
- pci_write_config8(PCI_DEV(0, 17, 0), 0x46, ByteVal);
-
- //enable embeded com1 and com2 D17F0RxB0[5,4]
- ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xB0);
- ByteVal = ByteVal & 0xcf;
- //multiplex with VCP
- if (USE_COM1 == 1)
- ByteVal = ByteVal | 0x10;
- if (USE_COM2 == 1)
- ByteVal = ByteVal | 0x20;
- pci_write_config8(PCI_DEV(0, 17, 0), 0xB0, ByteVal);
-
- if (USE_COM1 == 1)
- ComBase = gCom1Base;
- else
- ComBase = gCom2Base;
-
-//noharddrive
-
- //set embeded com1 IO base = 0x3E8
- //D17F0RB4
- //ByteVal = 0xFD;
- if (USE_COM1 == 1) {
- ByteVal = (u8) ((gCom1Base >> 3) | 0x80);
- pci_write_config8(PCI_DEV(0, 17, 0), 0xB4, ByteVal);
- ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2);
- ByteVal = (ByteVal & 0xf0) | 0x04;
- pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal);
- }
- //set embeded com2 IO base = 0x2E8
- //D17F0RB5
- //ByteVal = 0xDD;
- if (USE_COM2 == 1) {
- ByteVal = (u8) ((gCom2Base >> 3) | 0x80);
- pci_write_config8(PCI_DEV(0, 17, 0), 0xB5, ByteVal);
- ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2);
- ByteVal = (ByteVal & 0x0f) | 0x30;
- pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal);
- }
- //no port 80 biger then 0x10
-
- //disable interrupt
- ByteVal = inb(ComBase + 3);
- outb(ByteVal & 0x7F, ComBase + 3);
- outb(0x00, ComBase + 1);
-
- //set baudrate
- ByteVal = inb(ComBase + 3);
- outb(ByteVal | 0x80, ComBase + 3);
- outb(0x01, ComBase);
- outb(0x00, ComBase + 1);
-
- //set frame fromat
- ByteVal = inb(ComBase + 3);
- outb(ByteVal & 0x3F, ComBase + 3);
- outb(0x03, ComBase + 3);
- outb(0x00, ComBase + 2);
- outb(0x00, ComBase + 4);
-
- //SOutput("Embeded com output\n");
- //while(1);
-}
-
-void main(unsigned long bist)
-{
- unsigned cpu_reset = 0;
- u16 boot_mode;
- u8 rambits;
-
- //device_t dev;
- /* Enable multifunction for northbridge. */
- pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, 0x01);
- EmbedComInit();
- //enable_vx800_serial();
- //uart_init();
-
-/* 1. D15F0
-
-a) RxBAh = 71h
-
-b) RxBBh = 05h
-
-c) RxBEh = 71h
-
-d) RxBFh = 05h
-
-2. D17F0
-
-a) RxA0h = 06h
-
-b) RxA1h = 11h
-
-c) RxA2h = 27h
-
-d) RxA3h = 32h
-
-e) Rx79h = 40h
-
-f) Rx72h = 27h
-
-g) Rx73h = 32h
-*/
-
- u8 Data8;
-
- pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBA,
- PCI_DEVICE_ID_VIA_VX855_IDE);
- pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBE,
- PCI_DEVICE_ID_VIA_VX855_IDE);
- pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA0, PCI_VENDOR_ID_VIA);
- pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA2,
- PCI_DEVICE_ID_VIA_VX855_LPC);
- Data8 = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x79);
- Data8 &= ~0x40;
- Data8 |= 0x40;
- pci_write_config8(PCI_DEV(0, 0x11, 0), 0x79, Data8);
- pci_write_config16(PCI_DEV(0, 0x11, 0), 0x72,
- PCI_DEVICE_ID_VIA_VX855_LPC);
-
- console_init(); //there are to function defination of console_init(), while the src/archi386/lib is the right one
-
- /* decide if this is a s3 wakeup or a normal boot */
- boot_mode = acpi_is_wakeup_early_via_vx800();
- /*add this, to transfer "cpu restart" to "cold boot"
- When this boot is not a S3 resume, and PCI registers had been written,
- then this must be a cpu restart(result of os reboot cmd). so we need a real "cold boot". */
- if ((boot_mode != 3)
- && (pci_read_config8(PCI_DEV(0, 0, 3), 0x80) != 0)) {
- outb(6, 0xcf9);
- }
-
- /*x86 cold boot I/O cmd */
- enable_smbus();
- //smbus_fixup(&ctrl);// this fix does help vx800!, but vx855 no need this
-
- if (bist == 0) {
- // CAR need mtrr untill mem is ok, so i disable this early_mtrr_init();
- //print_debug("doing early_mtrr\n");
- //early_mtrr_init();
- }
-
- /* Halt if there was a built-in self test failure. */
- report_bist_failure(bist);
-
- print_debug("Enabling mainboard devices\n");
- enable_mainboard_devices();
-
- u8 Data;
- device_t device;
- /* Get NB Chip revision from D0F4RxF6, revision will be used in via_pci_inittable */
- device = PCI_DEV(0, 0, 4);
- Data = pci_read_config8(device, 0xf6);
- print_debug("NB chip revision =");
- print_debug_hex8(Data);
- print_debug("\n");
- /* make NB ready before draminit */
- via_pci_inittable(Data, mNbStage1InitTbl);
-
- /*add this.
- When resume from s3, draminit is skiped, so need to recovery any PCI register related to draminit.
- and d0f3 didnt lost its Power during whole s3 time, so any register not belongs to d0f3 need to be recoveried . */
-#if 1
- if (boot_mode == 3) {
- u8 i;
- u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 };
- DRAM_SYS_ATTR DramAttr;
-
- print_debug("This is a S3 wakeup\n");
-
- memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR));
- /*Step1 DRAM Detection; DDR1 or DDR2; Get SPD Data; Rank Presence;64 or 128bit; Unbuffered or registered; 1T or 2T */
- DRAMDetect(&DramAttr);
-
- /*begin to get ram size, 43,42 41 40 contains the end address of last rank in ddr2-slot */
- device = PCI_DEV(0, 0, 3);
- for (rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) {
- rambits = pci_read_config8(device, ramregs[i]);
- if (rambits != 0)
- break;
- }
-
- DRAMDRDYSetting(&DramAttr);
-
- Data = 0x80; // this value is same with dev_init.c
- pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data);
- pci_write_config8(PCI_DEV(0, 17, 7), 0x60, rambits << 2);
- Data = pci_read_config8(MEMCTRL, 0x88);
- pci_write_config8(PCI_DEV(0, 17, 7), 0xE5, Data);
-
- DRAMRegFinalValue(&DramAttr); // I just copy this function from draminit to here!
- SetUMARam(); // I just copy this function from draminit to here!
- print_debug("Resume from S3, RAM init was ignored\n");
- } else {
- ddr2_ram_setup();
- ram_check(0, 640 * 1024);
- }
-#endif
- //ddr2_ram_setup();
- /*this line is the same with cx700 port . */
- enable_shadow_ram();
-
- /*
- For coreboot most time of S3 resume is the same as normal boot, so some memory area under 1M become dirty,
- so before this happen, I need to backup the content of mem to top-mem.
- I will reserve the 1M top-men in LBIO table in coreboot_table.c and recovery the content of 1M-mem in wakeup.c
- */
-#if PAYLOAD_IS_SEABIOS==1 //
- if (boot_mode == 3) {
- /* some idea of Libo.Feng at amd.com in http://www.coreboot.org/pipermail/coreboot/2008-December/043111.html
- I want move the 1M data, I have to set some MTRRs myself. */
- /* setting mtrr before back memory save s3 resume time about 0.14 seconds */
- /*because CAR stack use cache, and here to use cache , must be careful,
- 1 during these mtrr code, must no function call, (after this mtrr, I think it should be ok to use function)
- 2 before stack switch, no use variable that have value set before this
- 3 due to 2, take care of "cpu_reset", I directlly set it to ZERO.
- */
- u32 memtop = *(u32 *) WAKE_MEM_INFO;
- u32 memtop1 = *(u32 *) WAKE_MEM_INFO - 0x100000;
- u32 memtop2 = *(u32 *) WAKE_MEM_INFO - 0x200000;
- u32 memtop3 =
- *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000;
- u32 memtop4 =
- *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000 +
- 0xe0000;
- /* __asm__ volatile (
- "movl $0x204, %%ecx\n\t"
- "xorl %%edx, %%edx\n\t"
- "movl %0,%%eax\n\t"
- "orl $(0 | 6), %%eax\n\t"
- "wrmsr\n\t"
-
- "movl $0x205, %%ecx\n\t"
- "xorl %%edx, %%edx\n\t"
- "movl $0x100000,%%eax\n\t"
- "decl %%eax\n\t"
- "notl %%eax\n\t"
- "orl $(0 | 0x800), %%eax\n\t"
- "wrmsr\n\t"
- ::"g"(memtop2)
- );
- __asm__ volatile (
- "movl $0x206, %%ecx\n\t"
- "xorl %%edx, %%edx\n\t"
- "movl %0,%%eax\n\t"
- "orl $(0 | 6), %%eax\n\t"
- "wrmsr\n\t"
-
- "movl $0x207, %%ecx\n\t"
- "xorl %%edx, %%edx\n\t"
- "movl $0x100000,%%eax\n\t"
- "decl %%eax\n\t"
- "notl %%eax\n\t"
- "orl $(0 | 0x800), %%eax\n\t"
- "wrmsr\n\t"
- ::"g"(memtop1)
- );
- __asm__ volatile (
- "movl $0x208, %ecx\n\t"
- "xorl %edx, %edx\n\t"
- "movl $0,%eax\n\t"
- "orl $(0 | 6), %eax\n\t"
- "wrmsr\n\t"
-
- "movl $0x209, %ecx\n\t"
- "xorl %edx, %edx\n\t"
- "movl $0x100000,%eax\n\t"
- "decl %eax\n\t"
- "notl %eax\n\t"
- "orl $(0 | 0x800), %eax\n\t"
- "wrmsr\n\t"
- );
- */
- // WAKE_MEM_INFO is inited in get_set_top_available_mem in tables.c
- // these two memcpy not not be enabled if set the MTRR around this two lines.
- /*__asm__ volatile (
- "movl $0, %%esi\n\t"
- "movl %0, %%edi\n\t"
- "movl $0xa0000, %%ecx\n\t"
- "shrl $2, %%ecx\n\t"
- "rep movsd\n\t"
- ::"g"(memtop3)
- );
- __asm__ volatile (
- "movl $0xe0000, %%esi\n\t"
- "movl %0, %%edi\n\t"
- "movl $0x20000, %%ecx\n\t"
- "shrl $2, %%ecx\n\t"
- "rep movsd\n\t"
- ::"g"(memtop4)
- );*/
- print_debug("copy memory to high memory to protect s3 wakeup vector code \n"); //this can have function call, because no variable used before this
- memcpy((unsigned char *) ((*(u32 *) WAKE_MEM_INFO) -
- 64 * 1024 - 0x100000),
- (unsigned char *) 0, 0xa0000);
- memcpy((unsigned char *) ((*(u32 *) WAKE_MEM_INFO) -
- 64 * 1024 - 0x100000 + 0xe0000),
- (unsigned char *) 0xe0000, 0x20000);
-
- /* restore the MTRR previously modified. */
-/* __asm__ volatile (
- "wbinvd\n\t"
- "xorl %edx, %edx\n\t"
- "xorl %eax, %eax\n\t"
- "movl $0x204, %ecx\n\t"
- "wrmsr\n\t"
- "movl $0x205, %ecx\n\t"
- "wrmsr\n\t"
- "movl $0x206, %ecx\n\t"
- "wrmsr\n\t"
- "movl $0x207, %ecx\n\t"
- "wrmsr\n\t"
- "movl $0x208, %ecx\n\t"
- "wrmsr\n\t"
- "movl $0x209, %ecx\n\t"
- "wrmsr\n\t"
- );*/
- }
-#endif
-}