summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/drivers/i2c/w83795/chip.h142
-rw-r--r--src/drivers/i2c/w83795/w83795.c357
-rw-r--r--src/drivers/i2c/w83795/w83795.h52
3 files changed, 417 insertions, 134 deletions
diff --git a/src/drivers/i2c/w83795/chip.h b/src/drivers/i2c/w83795/chip.h
new file mode 100644
index 0000000000..c8a42ea971
--- /dev/null
+++ b/src/drivers/i2c/w83795/chip.h
@@ -0,0 +1,142 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Raptor Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+struct drivers_i2c_w83795_config {
+ uint8_t fanin_ctl1;
+ uint8_t fanin_ctl2;
+
+ uint8_t temp_ctl1;
+ uint8_t temp_ctl2;
+ uint8_t temp_dtse;
+
+ uint8_t volt_ctl1;
+ uint8_t volt_ctl2;
+
+ uint8_t temp1_fan_select;
+ uint8_t temp2_fan_select;
+ uint8_t temp3_fan_select;
+ uint8_t temp4_fan_select;
+ uint8_t temp5_fan_select;
+ uint8_t temp6_fan_select;
+
+ uint8_t temp1_source_select;
+ uint8_t temp2_source_select;
+ uint8_t temp3_source_select;
+ uint8_t temp4_source_select;
+ uint8_t temp5_source_select;
+ uint8_t temp6_source_select;
+
+ uint32_t vcore1_high_limit_mv; /* mV */
+ uint32_t vcore1_low_limit_mv; /* mV */
+ uint32_t vcore2_high_limit_mv; /* mV */
+ uint32_t vcore2_low_limit_mv; /* mV */
+ uint32_t vtt_high_limit_mv; /* mV */
+ uint32_t vtt_low_limit_mv; /* mV */
+ uint32_t vsen3_high_limit_mv; /* mV */
+ uint32_t vsen3_low_limit_mv; /* mV */
+ uint32_t vsen4_high_limit_mv; /* mV */
+ uint32_t vsen4_low_limit_mv; /* mV */
+ uint32_t vsen5_high_limit_mv; /* mV */
+ uint32_t vsen5_low_limit_mv; /* mV */
+ uint32_t vsen6_high_limit_mv; /* mV */
+ uint32_t vsen6_low_limit_mv; /* mV */
+ uint32_t vsen7_high_limit_mv; /* mV */
+ uint32_t vsen7_low_limit_mv; /* mV */
+ uint32_t vsen8_high_limit_mv; /* mV */
+ uint32_t vsen8_low_limit_mv; /* mV */
+ uint32_t vsen9_high_limit_mv; /* mV */
+ uint32_t vsen9_low_limit_mv; /* mV */
+ uint32_t vsen10_high_limit_mv; /* mV */
+ uint32_t vsen10_low_limit_mv; /* mV */
+ uint32_t vsen11_high_limit_mv; /* mV */
+ uint32_t vsen11_low_limit_mv; /* mV */
+ uint32_t vsen12_high_limit_mv; /* mV */
+ uint32_t vsen12_low_limit_mv; /* mV */
+ uint32_t vsen13_high_limit_mv; /* mV */
+ uint32_t vsen13_low_limit_mv; /* mV */
+ uint32_t vdd_high_limit_mv; /* mV */
+ uint32_t vdd_low_limit_mv; /* mV */
+ uint32_t vsb_high_limit_mv; /* mV */
+ uint32_t vsb_low_limit_mv; /* mV */
+ uint32_t vbat_high_limit_mv; /* mV */
+ uint32_t vbat_low_limit_mv; /* mV */
+
+ int8_t tr1_critical_temperature; /* °C */
+ int8_t tr1_critical_hysteresis; /* °C */
+ int8_t tr1_warning_temperature; /* °C */
+ int8_t tr1_warning_hysteresis; /* °C */
+ int8_t tr2_critical_temperature; /* °C */
+ int8_t tr2_critical_hysteresis; /* °C */
+ int8_t tr2_warning_temperature; /* °C */
+ int8_t tr2_warning_hysteresis; /* °C */
+ int8_t tr3_critical_temperature; /* °C */
+ int8_t tr3_critical_hysteresis; /* °C */
+ int8_t tr3_warning_temperature; /* °C */
+ int8_t tr3_warning_hysteresis; /* °C */
+ int8_t tr4_critical_temperature; /* °C */
+ int8_t tr4_critical_hysteresis; /* °C */
+ int8_t tr4_warning_temperature; /* °C */
+ int8_t tr4_warning_hysteresis; /* °C */
+ int8_t tr5_critical_temperature; /* °C */
+ int8_t tr5_critical_hysteresis; /* °C */
+ int8_t tr5_warning_temperature; /* °C */
+ int8_t tr5_warning_hysteresis; /* °C */
+ int8_t tr6_critical_temperature; /* °C */
+ int8_t tr6_critical_hysteresis; /* °C */
+ int8_t tr6_warning_temperature; /* °C */
+ int8_t tr6_warning_hysteresis; /* °C */
+ int8_t dts_critical_temperature; /* °C */
+ int8_t dts_critical_hysteresis; /* °C */
+ int8_t dts_warning_temperature; /* °C */
+ int8_t dts_warning_hysteresis; /* °C */
+
+ int8_t temp1_critical_temperature; /* °C */
+ int8_t temp2_critical_temperature; /* °C */
+ int8_t temp3_critical_temperature; /* °C */
+ int8_t temp4_critical_temperature; /* °C */
+ int8_t temp5_critical_temperature; /* °C */
+ int8_t temp6_critical_temperature; /* °C */
+
+ int8_t temp1_target_temperature; /* °C */
+ int8_t temp2_target_temperature; /* °C */
+ int8_t temp3_target_temperature; /* °C */
+ int8_t temp4_target_temperature; /* °C */
+ int8_t temp5_target_temperature; /* °C */
+ int8_t temp6_target_temperature; /* °C */
+
+ uint8_t fan1_nonstop; /* % of full speed (0-100) */
+ uint8_t fan2_nonstop; /* % of full speed (0-100) */
+ uint8_t fan3_nonstop; /* % of full speed (0-100) */
+ uint8_t fan4_nonstop; /* % of full speed (0-100) */
+ uint8_t fan5_nonstop; /* % of full speed (0-100) */
+ uint8_t fan6_nonstop; /* % of full speed (0-100) */
+ uint8_t fan7_nonstop; /* % of full speed (0-100) */
+ uint8_t fan8_nonstop; /* % of full speed (0-100) */
+
+ uint8_t default_speed; /* % of full speed (0-100) */
+
+ uint8_t fan1_duty; /* % of full speed (0-100) */
+ uint8_t fan2_duty; /* % of full speed (0-100) */
+ uint8_t fan3_duty; /* % of full speed (0-100) */
+ uint8_t fan4_duty; /* % of full speed (0-100) */
+ uint8_t fan5_duty; /* % of full speed (0-100) */
+ uint8_t fan6_duty; /* % of full speed (0-100) */
+ uint8_t fan7_duty; /* % of full speed (0-100) */
+ uint8_t fan8_duty; /* % of full speed (0-100) */
+};
diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c
index 2bbe0bef17..4a6486b57c 100644
--- a/src/drivers/i2c/w83795/w83795.c
+++ b/src/drivers/i2c/w83795/w83795.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Raptor Engineering
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,106 +22,73 @@
#include <arch/cpu.h>
#include <console/console.h>
#include <device/device.h>
-#include "southbridge/amd/cimx/sb700/smbus.h" /*SMBUS_IO_BASE*/
#include "w83795.h"
+#include <device/smbus.h>
+#include "chip.h"
-static int w83795_set_bank(u8 bank)
+static int w83795_set_bank(struct device *dev, uint8_t bank)
{
- return do_smbus_write_byte(SMBUS_IO_BASE, W83795_DEV, W83795_REG_BANKSEL, bank);
+ return smbus_write_byte(dev, W83795_REG_BANKSEL, bank);
}
-static u8 w83795_read(u16 reg)
+static uint8_t w83795_read(struct device *dev, uint16_t reg)
{
int ret;
- ret = w83795_set_bank(reg >> 8);
+ ret = w83795_set_bank(dev, reg >> 8);
if (ret < 0) {
- printk(BIOS_DEBUG, "read faild to set bank %x\n", reg >> 8);
+ printk(BIOS_DEBUG, "read failed to set bank %x\n", reg >> 8);
return -1;
}
- ret = do_smbus_read_byte(SMBUS_IO_BASE, W83795_DEV, reg & 0xff);
+ ret = smbus_read_byte(dev, reg & 0xff);
return ret;
}
-static u8 w83795_write(u16 reg, u8 value)
+static uint8_t w83795_write(struct device *dev, uint16_t reg, uint8_t value)
{
int err;
- err = w83795_set_bank(reg >> 8);
+ err = w83795_set_bank(dev, reg >> 8);
if (err < 0) {
- printk(BIOS_DEBUG, "write faild to set bank %x\n", reg >> 8);
+ printk(BIOS_DEBUG, "write failed to set bank %x\n", reg >> 8);
return -1;
}
- err = do_smbus_write_byte(SMBUS_IO_BASE, W83795_DEV, reg & 0xff, value);
+ err = smbus_write_byte(dev, reg & 0xff, value);
return err;
}
/*
- * Enable Digital Temperature Sensor
+ * Configure Digital Temperature Sensor
*/
-static void w83795_dts_enable(u8 dts_src)
+static void w83795_dts_configure(struct device *dev, uint8_t dts_src)
{
u8 val;
/* DIS */
- val = w83795_read(W83795_REG_DTSC);
- val |= (dts_src & 0x01);
- w83795_write(W83795_REG_DTSC, val);
-
- /* DTSE */
- val = w83795_read(W83795_REG_DTSE);
- val |= 0xFF;
- w83795_write(W83795_REG_DTSE, val);
-
- /* store bank3 regs first before enable DTS */
-
- /*
- * TD/TR1-4 thermal diode by default
- * 0x00 Disable
- * 0x01 thermistors on motherboard
- * 0x10 different mode voltage
- * 0x11 CPU internal thermal diode output
- *
- * TR5-6 thermistors by default TRn
- */
- val = 0x55; /* thermal diode */
- w83795_write(W83795_REG_TEMP_CTRL2, val);
-
- /* Enable Digital Temperature Sensor */
- val = w83795_read(W83795_REG_TEMP_CTRL1);
- val |= W83795_REG_TEMP_CTRL1_EN_DTS; /* EN_DTS */
- w83795_write(W83795_REG_TEMP_CTRL1, val);
-}
-
-static void w83795_set_tfmr(w83795_fan_mode_t mode)
-{
- u8 val;
- u8 i;
+ val = w83795_read(dev, W83795_REG_DTSC) & ~0x1;
+ val |= dts_src & 0x1;
+ w83795_write(dev, W83795_REG_DTSC, val);
- if ((mode == SMART_FAN_MODE) || (mode == THERMAL_CRUISE_MODE)) {
- val = 0xFF;
- } else {
- val = 0x00;
- }
-
- for (i = 0; i < 6; i++)
- w83795_write(W83795_REG_TFMR(i), val);
+ /* TODO
+ * Determine if DTS interface needs to be reset
+ * (W83795_REG_DTSC bit 7) before operation.
+ */
}
-static u32 w83795_set_fan_mode(w83795_fan_mode_t mode)
+static u32 w83795_set_fan_mode(struct device *dev, w83795_fan_mode_t mode)
{
if (mode == SPEED_CRUISE_MODE) {
- w83795_write(W83795_REG_FCMS1, 0xFF);
+ w83795_write(dev, W83795_REG_FCMS1, 0xFF);
printk(BIOS_INFO, "W83795G/ADG work in Speed Cruise Mode\n");
} else {
- w83795_write(W83795_REG_FCMS1, 0x00);
+ w83795_write(dev, W83795_REG_FCMS1, 0x00);
if (mode == THERMAL_CRUISE_MODE) {
- w83795_write(W83795_REG_FCMS2, 0x00);
+ w83795_write(dev, W83795_REG_FCMS2, 0x00);
printk(BIOS_INFO, "W83795G/ADG work in Thermal Cruise Mode\n");
} else if (mode == SMART_FAN_MODE) {
- w83795_write(W83795_REG_FCMS2, 0x3F);
+ w83795_write(dev, W83795_REG_FCMS2, 0x3F);
printk(BIOS_INFO, "W83795G/ADG work in Smart Fan Mode\n");
} else {
printk(BIOS_INFO, "W83795G/ADG work in Manual Mode\n");
@@ -131,40 +99,12 @@ static u32 w83795_set_fan_mode(w83795_fan_mode_t mode)
return 0;
}
-static void w83795_set_tss(void)
+static void w83795_set_fan(struct device *dev, w83795_fan_mode_t mode)
{
- u8 val;
-
- val = 0x00;
- w83795_write(W83795_REG_TSS(0), val); /* Temp1, 2 */
- w83795_write(W83795_REG_TSS(1), val); /* Temp3, 4 */
- w83795_write(W83795_REG_TSS(2), val); /* Temp5, 6 */
-}
-
-static void w83795_set_fan(w83795_fan_mode_t mode)
-{
- u8 i;
-
- /* select temperature sensor (TSS)*/
- w83795_set_tss();
-
- /* select Temperature to Fan mapping Relationships (TFMR)*/
- w83795_set_tfmr(mode);
-
/* set fan output controlled mode (FCMS)*/
- w83795_set_fan_mode(mode);
+ w83795_set_fan_mode(dev, mode);
- /* Set Critical Temperature to Full Speed all fan (CTFS) */
- for (i = 0; i < 6; i++) {
- w83795_write(W83795_REG_CTFS(i), 0x50); /* default 80 celsius degree */
- }
-
- if (mode == THERMAL_CRUISE_MODE) {
- /* Set Target Temperature of Temperature Inputs (TTTI) */
- for (i = 0; i < 6; i++) {
- w83795_write(W83795_REG_TTTI(i), 0x28); /* default 40 celsius degree */
- }
- } else if (mode == SMART_FAN_MODE) {
+ if (mode == SMART_FAN_MODE) {
/* Set the Relative Register-at SMART FAN IV Control Mode Table */
//SFIV TODO
}
@@ -173,16 +113,44 @@ static void w83795_set_fan(w83795_fan_mode_t mode)
//TODO
}
-static void w83795_init(w83795_fan_mode_t mode, u8 dts_src)
+static uint8_t fan_pct_to_cfg_val(uint8_t percent)
{
- u8 i;
- u8 val;
+ uint16_t cfg = (((unsigned int)percent * 10000) / 3922);
+ if (cfg > 0xff)
+ cfg = 0xff;
+ return cfg;
+}
+
+static uint8_t millivolts_to_limit_value_type1(int millivolts)
+{
+ /* Datasheet v1.41 pages 44 and 70 (VSEN1 - VSEN11, VTT) */
+ return ((millivolts / 2) >> 2);
+}
+
+static uint8_t millivolts_to_limit_value_type2(int millivolts)
+{
+ /* Datasheet v1.41 page pages 44 and 70 (3VSB, 3VDD, VBAT) */
+ return ((millivolts / 6) >> 2);
+}
+
+static uint16_t millivolts_to_limit_value_type3(int millivolts)
+{
+ /* Datasheet v1.41 page 45 (VSEN12, VSEN13, VDSEN14 - VDSEN17) */
+ return (millivolts / 2);
+}
+
+static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src)
+{
+ struct drivers_i2c_w83795_config *config = dev->chip_info;
+ uint8_t i;
+ uint8_t val;
+ uint16_t limit_value;
- if (do_smbus_read_byte(SMBUS_IO_BASE, W83795_DEV, 0x00) < 0) {
+ if (smbus_read_byte(dev, 0x00) < 0) {
printk(BIOS_ERR, "W83795G/ADG Nuvoton H/W Monitor not found\n");
return;
}
- val = w83795_read(W83795_REG_CONFIG);
+ val = w83795_read(dev, W83795_REG_CONFIG);
if ((val & W83795_REG_CONFIG_CONFIG48) == 0)
printk(BIOS_INFO, "Found 64 pin W83795G Nuvoton H/W Monitor\n");
else if ((val & W83795_REG_CONFIG_CONFIG48) == 1)
@@ -190,35 +158,186 @@ static void w83795_init(w83795_fan_mode_t mode, u8 dts_src)
/* Reset */
val |= W83795_REG_CONFIG_INIT;
- w83795_write(W83795_REG_CONFIG, val);
-
- /* Fan monitoring setting */
- val = 0xFF; /* FAN1-FAN8 */
- w83795_write(W83795_REG_FANIN_CTRL1, val);
- val = 0x3F; /* FAN9-FAN14 */
- w83795_write(W83795_REG_FANIN_CTRL2, val);
+ w83795_write(dev, W83795_REG_CONFIG, val);
+
+ /* Fan monitor settings */
+ w83795_write(dev, W83795_REG_FANIN_CTRL1, config->fanin_ctl1);
+ w83795_write(dev, W83795_REG_FANIN_CTRL2, config->fanin_ctl2);
+
+ /* Temperature thresholds */
+ w83795_write(dev, W83795_REG_TEMP_CRIT(0), config->tr1_critical_temperature);
+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(0), config->tr1_critical_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_WARN(0), config->tr1_warning_temperature);
+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(0), config->tr1_warning_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_CRIT(1), config->tr2_critical_temperature);
+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(1), config->tr2_critical_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_WARN(1), config->tr2_warning_temperature);
+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(1), config->tr2_warning_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_CRIT(2), config->tr3_critical_temperature);
+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(2), config->tr3_critical_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_WARN(2), config->tr3_warning_temperature);
+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(2), config->tr3_warning_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_CRIT(3), config->tr4_critical_temperature);
+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(3), config->tr4_critical_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_WARN(3), config->tr4_warning_temperature);
+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(3), config->tr4_warning_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_CRIT(4), config->tr5_critical_temperature);
+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(4), config->tr5_critical_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_WARN(4), config->tr5_warning_temperature);
+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(4), config->tr5_warning_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_CRIT(5), config->tr6_critical_temperature);
+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(5), config->tr6_critical_hysteresis);
+ w83795_write(dev, W83795_REG_TEMP_WARN(5), config->tr6_warning_temperature);
+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(5), config->tr6_warning_hysteresis);
+
+ /* DTS temperature thresholds */
+ w83795_write(dev, W83795_REG_DTS_CRIT, config->dts_critical_temperature);
+ w83795_write(dev, W83795_REG_DTS_CRIT_HYSTER, config->dts_critical_hysteresis);
+ w83795_write(dev, W83795_REG_DTS_WARN, config->dts_warning_temperature);
+ w83795_write(dev, W83795_REG_DTS_WARN_HYSTER, config->dts_warning_hysteresis);
+
+ /* Configure DTS registers in bank3 before enabling DTS */
+ w83795_dts_configure(dev, dts_src);
+
+ /* DTS enable */
+ w83795_write(dev, W83795_REG_DTSE, config->temp_dtse);
+
+ /* Temperature monitor settings */
+ w83795_write(dev, W83795_REG_TEMP_CTRL1, config->temp_ctl1);
+ w83795_write(dev, W83795_REG_TEMP_CTRL2, config->temp_ctl2);
+
+ /* Temperature to fan mappings */
+ w83795_write(dev, W83795_REG_TFMR(0), config->temp1_fan_select);
+ w83795_write(dev, W83795_REG_TFMR(1), config->temp2_fan_select);
+ w83795_write(dev, W83795_REG_TFMR(2), config->temp3_fan_select);
+ w83795_write(dev, W83795_REG_TFMR(3), config->temp4_fan_select);
+ w83795_write(dev, W83795_REG_TFMR(4), config->temp5_fan_select);
+ w83795_write(dev, W83795_REG_TFMR(5), config->temp6_fan_select);
+
+ /* Temperature data source to temperature mappings */
+ w83795_write(dev, W83795_REG_T12TSS, ((config->temp2_source_select & 0x0f) << 4) | (config->temp1_source_select & 0x0f));
+ w83795_write(dev, W83795_REG_T34TSS, ((config->temp4_source_select & 0x0f) << 4) | (config->temp3_source_select & 0x0f));
+ w83795_write(dev, W83795_REG_T56TSS, ((config->temp6_source_select & 0x0f) << 4) | (config->temp5_source_select & 0x0f));
+
+ /* Set critical temperatures
+ * If any sensor exceeds the associated critical temperature,
+ * all fans will be forced to full speed.
+ */
+ w83795_write(dev, W83795_REG_CTFS(0), config->temp1_critical_temperature);
+ w83795_write(dev, W83795_REG_CTFS(1), config->temp2_critical_temperature);
+ w83795_write(dev, W83795_REG_CTFS(2), config->temp3_critical_temperature);
+ w83795_write(dev, W83795_REG_CTFS(3), config->temp4_critical_temperature);
+ w83795_write(dev, W83795_REG_CTFS(4), config->temp5_critical_temperature);
+ w83795_write(dev, W83795_REG_CTFS(5), config->temp6_critical_temperature);
+
+ /* Set fan control target temperatures */
+ w83795_write(dev, W83795_REG_TTTI(0), config->temp1_target_temperature);
+ w83795_write(dev, W83795_REG_TTTI(1), config->temp2_target_temperature);
+ w83795_write(dev, W83795_REG_TTTI(2), config->temp3_target_temperature);
+ w83795_write(dev, W83795_REG_TTTI(3), config->temp4_target_temperature);
+ w83795_write(dev, W83795_REG_TTTI(4), config->temp5_target_temperature);
+ w83795_write(dev, W83795_REG_TTTI(5), config->temp6_target_temperature);
+
+ /* Set fan stall prevention parameters */
+ w83795_write(dev, W83795_REG_FAN_NONSTOP(0), config->fan1_nonstop);
+ w83795_write(dev, W83795_REG_FAN_NONSTOP(1), config->fan2_nonstop);
+ w83795_write(dev, W83795_REG_FAN_NONSTOP(2), config->fan3_nonstop);
+ w83795_write(dev, W83795_REG_FAN_NONSTOP(3), config->fan4_nonstop);
+ w83795_write(dev, W83795_REG_FAN_NONSTOP(4), config->fan5_nonstop);
+ w83795_write(dev, W83795_REG_FAN_NONSTOP(5), config->fan6_nonstop);
+ w83795_write(dev, W83795_REG_FAN_NONSTOP(6), config->fan7_nonstop);
+ w83795_write(dev, W83795_REG_FAN_NONSTOP(7), config->fan8_nonstop);
+
+ /* Set fan default speed */
+ w83795_write(dev, W83795_REG_DFSP, fan_pct_to_cfg_val(config->default_speed));
+
+ /* Set initial fan speeds */
+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(0), fan_pct_to_cfg_val(config->fan1_duty));
+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(1), fan_pct_to_cfg_val(config->fan2_duty));
+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(2), fan_pct_to_cfg_val(config->fan3_duty));
+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(3), fan_pct_to_cfg_val(config->fan4_duty));
+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(4), fan_pct_to_cfg_val(config->fan5_duty));
+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(5), fan_pct_to_cfg_val(config->fan6_duty));
+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(6), fan_pct_to_cfg_val(config->fan7_duty));
+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(7), fan_pct_to_cfg_val(config->fan8_duty));
+
+ /* Voltage monitor settings */
+ w83795_write(dev, W83795_REG_VOLT_CTRL1, config->volt_ctl1);
+ w83795_write(dev, W83795_REG_VOLT_CTRL2, config->volt_ctl2);
+
+ /* Voltage high/low limits */
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(0), millivolts_to_limit_value_type1(config->vcore1_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(0), millivolts_to_limit_value_type1(config->vcore1_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(1), millivolts_to_limit_value_type1(config->vcore2_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(1), millivolts_to_limit_value_type1(config->vcore2_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(2), millivolts_to_limit_value_type1(config->vsen3_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(2), millivolts_to_limit_value_type1(config->vsen3_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(3), millivolts_to_limit_value_type1(config->vsen4_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(3), millivolts_to_limit_value_type1(config->vsen4_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(4), millivolts_to_limit_value_type1(config->vsen5_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(4), millivolts_to_limit_value_type1(config->vsen5_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(5), millivolts_to_limit_value_type1(config->vsen6_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(5), millivolts_to_limit_value_type1(config->vsen6_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(6), millivolts_to_limit_value_type1(config->vsen7_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(6), millivolts_to_limit_value_type1(config->vsen7_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(7), millivolts_to_limit_value_type1(config->vsen8_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(7), millivolts_to_limit_value_type1(config->vsen8_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(8), millivolts_to_limit_value_type1(config->vsen9_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(8), millivolts_to_limit_value_type1(config->vsen9_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(9), millivolts_to_limit_value_type1(config->vsen10_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(9), millivolts_to_limit_value_type1(config->vsen10_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(10), millivolts_to_limit_value_type1(config->vsen11_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(10), millivolts_to_limit_value_type1(config->vsen11_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(11), millivolts_to_limit_value_type1(config->vtt_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(11), millivolts_to_limit_value_type1(config->vtt_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(12), millivolts_to_limit_value_type2(config->vdd_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(12), millivolts_to_limit_value_type2(config->vdd_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(13), millivolts_to_limit_value_type2(config->vsb_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(13), millivolts_to_limit_value_type2(config->vsb_low_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(14), millivolts_to_limit_value_type2(config->vbat_high_limit_mv));
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(14), millivolts_to_limit_value_type2(config->vbat_low_limit_mv));
+
+ /* VSEN12 limits */
+ if (config->temp_ctl1 & 0x2) {
+ limit_value = millivolts_to_limit_value_type3(config->vsen12_high_limit_mv);
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_M(4), limit_value >> 2);
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_L(4), limit_value & 0x3);
+ limit_value = millivolts_to_limit_value_type3(config->vsen12_low_limit_mv);
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_M(4), limit_value >> 2);
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_L(4), limit_value & 0x3);
+ }
- /* enable monitoring operations */
- val = w83795_read(W83795_REG_CONFIG);
- val |= W83795_REG_CONFIG_START;
- w83795_write(W83795_REG_CONFIG, val);
+ /* VSEN13 limits */
+ if (config->temp_ctl1 & 0x8) {
+ limit_value = millivolts_to_limit_value_type3(config->vsen13_high_limit_mv);
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_M(5), limit_value >> 2);
+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_L(5), limit_value & 0x3);
+ limit_value = millivolts_to_limit_value_type3(config->vsen13_low_limit_mv);
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_M(5), limit_value >> 2);
+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_L(5), limit_value & 0x3);
+ }
- w83795_dts_enable(dts_src);
- w83795_set_fan(mode);
+ w83795_set_fan(dev, mode);
- printk(BIOS_INFO, "Fan CTFS(celsius) TTTI(celsius)\n");
+ /* Show current fan control settings */
+ printk(BIOS_INFO, "Fan\tCTFS(celsius)\tTTTI(celsius)\n");
for (i = 0; i < 6; i++) {
- val = w83795_read(W83795_REG_CTFS(i));
- printk(BIOS_INFO, " %x %d", i, val);
- val = w83795_read(W83795_REG_TTTI(i));
- printk(BIOS_INFO, " %d\n", val);
+ val = w83795_read(dev, W83795_REG_CTFS(i));
+ printk(BIOS_INFO, " %x\t%d", i + 1, val);
+ val = w83795_read(dev, W83795_REG_TTTI(i));
+ printk(BIOS_INFO, "\t%d\n", val);
}
- /* Temperature ReadOut */
- for (i = 0; i < 9; i++) {
- val = w83795_read(W83795_REG_DTS(i));
- printk(BIOS_DEBUG, "DTS%x ReadOut=%x\n", i, val);
+ /* Show current temperatures */
+ for (i = 0; i < 8; i++) {
+ val = w83795_read(dev, W83795_REG_DTS(i));
+ printk(BIOS_DEBUG, "DTS%x current value: %x\n", i + 1, val);
}
+
+ /* Start monitoring / fan control */
+ val = w83795_read(dev, W83795_REG_CONFIG);
+ val |= W83795_REG_CONFIG_START;
+ w83795_write(dev, W83795_REG_CONFIG, val);
}
static void w83795_hwm_init(struct device *dev)
@@ -232,9 +351,9 @@ static void w83795_hwm_init(struct device *dev)
die("CPU: missing cpu device structure");
if (cpu->vendor == X86_VENDOR_AMD)
- w83795_init(THERMAL_CRUISE_MODE, DTS_SRC_AMD_SBTSI);
+ w83795_init(dev, THERMAL_CRUISE_MODE, DTS_SRC_AMD_SBTSI);
else if (cpu->vendor == X86_VENDOR_INTEL)
- w83795_init(THERMAL_CRUISE_MODE, DTS_SRC_INTEL_PECI);
+ w83795_init(dev, THERMAL_CRUISE_MODE, DTS_SRC_INTEL_PECI);
else
printk(BIOS_ERR, "Neither AMD nor INTEL CPU detected\n");
}
diff --git a/src/drivers/i2c/w83795/w83795.h b/src/drivers/i2c/w83795/w83795.h
index cac4d5f5ef..ef603f5cfc 100644
--- a/src/drivers/i2c/w83795/w83795.h
+++ b/src/drivers/i2c/w83795/w83795.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Raptor Engineering
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,8 +21,6 @@
#ifndef _W83795_H_
#define _W83795_H_
-#define W83795_DEV 0x2F /* Host I2c Addr (strap to addr1 addr0 1 1, 0x5E) */
-
#define W83795_REG_I2C_ADDR 0xFC
#define W83795_REG_BANKSEL 0x00
#define W83795_REG_CONFIG 0x01
@@ -29,6 +28,8 @@
#define W83795_REG_CONFIG_CONFIG48 0x04
#define W83795_REG_CONFIG_INIT 0x80
+#define W83795_REG_VOLT_CTRL1 0x02
+#define W83795_REG_VOLT_CTRL2 0x03
#define W83795_REG_TEMP_CTRL1 0x04 /* Temperature Monitoring Control Register */
#define W83795_REG_TEMP_CTRL2 0x05 /* Temperature Monitoring Control Register */
#define W83795_REG_FANIN_CTRL1 0x06
@@ -37,37 +38,58 @@
#define DTS_SRC_INTEL_PECI (0 << 0)
#define DTS_SRC_AMD_SBTSI (1 << 0)
-#define W83795_REG_TSS(n) (0x209 + (n)) /* Temperature Source Selection Register */
#define W83795_REG_TTTI(n) (0x260 + (n)) /* Target temperature W83795G/ADG will try to tune the fan output to keep */
#define W83795_REG_CTFS(n) (0x268 + (n)) /* Critical Temperature to Full Speed all fan */
-#define W83795_REG_HT(n) (0x270 + (n)) /* Hysteresis of Temperature */
#define W83795_REG_DTSC 0x301 /* Digital Temperature Sensor Configuration */
#define W83795_REG_DTSE 0x302 /* Digital Temperature Sensor Enable */
#define W83795_REG_DTS(n) (0x26 + (n))
#define W83795_REG_VRLSB 0x3C
-#define W83795_TEMP_REG_TR1 0x21
-#define W83795_TEMP_REG_TR2 0x22
-#define W83795_TEMP_REG_TR3 0x23
-#define W83795_TEMP_REG_TR4 0x24
-#define W83795_TEMP_REG_TR5 0x1F
-#define W83795_TEMP_REG_TR6 0x20
+#define W83795_REG_TEMP_TR1 0x21
+#define W83795_REG_TEMP_TR2 0x22
+#define W83795_REG_TEMP_TR3 0x23
+#define W83795_REG_TEMP_TR4 0x24
+#define W83795_REG_TEMP_TR5 0x1F
+#define W83795_REG_TEMP_TR6 0x20
+
+#define W83795_REG_VOLT_LIM_HIGH(n) (0x70 + (n * 2)) /* Voltage high limit (0 == VSEN1) */
+#define W83795_REG_VOLT_LIM_LOW(n) (0x71 + (n * 2)) /* Voltage low limit (0 == VSEN1) */
+#define W83795_REG_VOLT_LIM_HIGH_2_M(n) (0x96 + (n * 4)) /* Voltage high limit MSB (0 == VDSEN14) */
+#define W83795_REG_VOLT_LIM_LOW_2_M(n) (0x97 + (n * 4)) /* Voltage low limit MSB (0 == VDSEN14) */
+#define W83795_REG_VOLT_LIM_HIGH_2_L(n) (0x98 + (n * 4)) /* Voltage high limit LSB (0 == VDSEN14) */
+#define W83795_REG_VOLT_LIM_LOW_2_L(n) (0x99 + (n * 4)) /* Voltage low limit LSB (0 == VDSEN14) */
+
+#define W83795_REG_TEMP_CRIT(n) (0x96 + (n * 4)) /* Temperature critical limit */
+#define W83795_REG_TEMP_CRIT_HYSTER(n) (0x97 + (n * 4)) /* Temperature critical limit hysteresis */
+#define W83795_REG_TEMP_WARN(n) (0x98 + (n * 4)) /* Temperature warning limit */
+#define W83795_REG_TEMP_WARN_HYSTER(n) (0x99 + (n * 4)) /* Temperature warning limit hysteresis */
+
+#define W83795_REG_DTS_CRIT 0xB2 /* Temperature critical limit */
+#define W83795_REG_DTS_CRIT_HYSTER 0xB3 /* Temperature critical limit hysteresis */
+#define W83795_REG_DTS_WARN 0xB4 /* Temperature warning limit */
+#define W83795_REG_DTS_WARN_HYSTER 0xB5 /* Temperature warning limit hysteresis */
#define W83795_REG_FCMS1 0x201
#define W83795_REG_FCMS2 0x208
-#define W83795_REG_TFMR(n) (0x202 + (n)) /*temperature to fam mappig*/
+#define W83795_REG_TFMR(n) (0x202 + (n)) /* Temperature to fan mapping */
+#define W83795_REG_T12TSS 0x209 /* Temperature Source Selection Register 1 */
+#define W83795_REG_T34TSS 0x20A /* Temperature Source Selection Register 2 */
+#define W83795_REG_T56TSS 0x20B /* Temperature Source Selection Register 3 */
+#define W83795_REG_FAN_MANUAL_SPEED(n) (0x210 + n)
#define W83795_REG_DFSP 0x20C
+#define W83795_REG_FAN_NONSTOP(n) (0x228 + (n)) /* Fan Nonstop Value */
+
#define W83795_REG_FTSH(n) (0x240 + (n) * 2)
#define W83795_REG_FTSL(n) (0x241 + (n) * 2)
#define W83795_REG_TFTS 0x250
typedef enum w83795_fan_mode {
- SPEED_CRUISE_MODE, ///< Fan Speed Cruise mode keeps the fan speed in a specified range
- THERMAL_CRUISE_MODE, ///< Thermal Cruise mode is an algorithm to control the fan speed to keep the temperature source around the TTTI
- SMART_FAN_MODE, ///< Smart Fan mode offers 6 slopes to control the fan speed
- MANUAL_MODE, ///< control manually
+ SPEED_CRUISE_MODE = 0, ///< Fan Speed Cruise mode keeps the fan speed in a specified range
+ THERMAL_CRUISE_MODE = 1, ///< Thermal Cruise mode is an algorithm to control the fan speed to keep the temperature source around the TTTI
+ SMART_FAN_MODE = 2, ///< Smart Fan mode offers 6 slopes to control the fan speed
+ MANUAL_MODE = 3, ///< control manually
} w83795_fan_mode_t;
#endif