diff options
Diffstat (limited to 'src')
23 files changed, 0 insertions, 4993 deletions
diff --git a/src/mainboard/amd/bimini_fam10/Kconfig b/src/mainboard/amd/bimini_fam10/Kconfig deleted file mode 100644 index 8d675e9fa5..0000000000 --- a/src/mainboard/amd/bimini_fam10/Kconfig +++ /dev/null @@ -1,108 +0,0 @@ -if BOARD_AMD_BIMINI_FAM10 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select ARCH_X86 - select CPU_AMD_SOCKET_ASB2 - select DIMM_DDR3 - select DIMM_REGISTERED - # TODO: Enable QRANK_DIMM_SUPPORT? Was commented in the Kconfig file, - # but enabled in the romstage.c file. - select QRANK_DIMM_SUPPORT - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_CIMX_WRAPPER_SB800 - select SUPERIO_ITE_IT8718F - select BOARD_HAS_FADT - select HAVE_BUS_CONFIG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_MAINBOARD_RESOURCES - select HAVE_HARD_RESET - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select SERIAL_CPU_INIT - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_2048 - select RAMINIT_SYSINFO - select ENABLE_APIC_EXT_ID - select TINY_BOOTBLOCK - select GFXUMA - select HAVE_DEBUG_CAR - select SET_FIDVID - -config MAINBOARD_DIR - string - default amd/bimini_fam10 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "Bimini (Fam10)" - -config HW_MEM_HOLE_SIZEK - hex - default 0x100000 - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config MEM_TRAIN_SEQ - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000b6.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x3060 - -config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID - hex - default 0x1022 - -config RAMBASE - hex - default 0x200000 - -endif #BOARD_AMD_BIMINI_FAM10 diff --git a/src/mainboard/amd/bimini_fam10/Makefile.inc b/src/mainboard/amd/bimini_fam10/Makefile.inc deleted file mode 100644 index 3c0bc8201c..0000000000 --- a/src/mainboard/amd/bimini_fam10/Makefile.inc +++ /dev/null @@ -1,7 +0,0 @@ -#FIXME romstage have include test_rest.c -#romstage-y += reset.c -romstage-y += pmio.c - -ramstage-y += reset.c -ramstage-y += pmio.c - diff --git a/src/mainboard/amd/bimini_fam10/acpi/cpstate.asl b/src/mainboard/amd/bimini_fam10/acpi/cpstate.asl deleted file mode 100644 index 6a1b002474..0000000000 --- a/src/mainboard/amd/bimini_fam10/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (\_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/amd/bimini_fam10/acpi/ide.asl b/src/mainboard/amd/bimini_fam10/acpi/ide.asl deleted file mode 100644 index 6ea2b09f2c..0000000000 --- a/src/mainboard/amd/bimini_fam10/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/amd/bimini_fam10/acpi/routing.asl b/src/mainboard/amd/bimini_fam10/acpi/routing.asl deleted file mode 100644 index 641b168e9b..0000000000 --- a/src/mainboard/amd/bimini_fam10/acpi/routing.asl +++ /dev/null @@ -1,398 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/amd/bimini_fam10/acpi/sata.asl b/src/mainboard/amd/bimini_fam10/acpi/sata.asl deleted file mode 100644 index b5e6fc5665..0000000000 --- a/src/mainboard/amd/bimini_fam10/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/amd/bimini_fam10/acpi/usb.asl b/src/mainboard/amd/bimini_fam10/acpi/usb.asl deleted file mode 100644 index 203e0ad25a..0000000000 --- a/src/mainboard/amd/bimini_fam10/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, \_SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/amd/bimini_fam10/acpi_tables.c b/src/mainboard/amd/bimini_fam10/acpi_tables.c deleted file mode 100644 index a5422ffd6c..0000000000 --- a/src/mainboard/amd/bimini_fam10/acpi_tables.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> - -#include "mb_sysconf.h" - -#define DUMP_ACPI_TABLES 0 - -#if DUMP_ACPI_TABLES == 1 -static void dump_mem(u32 start, u32 end) -{ - - u32 i; - print_debug("dump_mem:"); - for (i = start; i < end; i++) { - if ((i & 0xf) == 0) { - printk(BIOS_DEBUG, "\n%08x:", i); - } - printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); - } - print_debug("\n"); -} -#endif - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edige-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = (start + 0x0f) & -0x10; - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ( current + 0x0f) & -0x10; - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - - printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); - current = acpi_add_ssdt_pstates(rsdp, current); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FDAT */ - current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - -#if DUMP_ACPI_TABLES == 1 - printk(BIOS_DEBUG, "rsdp\n"); - dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - - printk(BIOS_DEBUG, "rsdt\n"); - dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - - printk(BIOS_DEBUG, "madt\n"); - dump_mem(madt, ((void *)madt) + madt->header.length); - - printk(BIOS_DEBUG, "srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); - - printk(BIOS_DEBUG, "slit\n"); - dump_mem(slit, ((void *)slit) + slit->header.length); - - printk(BIOS_DEBUG, "ssdt\n"); - dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - - printk(BIOS_DEBUG, "fadt\n"); - dump_mem(fadt, ((void *)fadt) + fadt->header.length); -#endif - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/amd/bimini_fam10/chip.h b/src/mainboard/amd/bimini_fam10/chip.h deleted file mode 100644 index 20135163b8..0000000000 --- a/src/mainboard/amd/bimini_fam10/chip.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -extern struct chip_operations mainboard_ops; - -struct mainboard_config {}; diff --git a/src/mainboard/amd/bimini_fam10/cmos.layout b/src/mainboard/amd/bimini_fam10/cmos.layout deleted file mode 100644 index 53fdef5b0a..0000000000 --- a/src/mainboard/amd/bimini_fam10/cmos.layout +++ /dev/null @@ -1,98 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 - - diff --git a/src/mainboard/amd/bimini_fam10/devicetree.cb b/src/mainboard/amd/bimini_fam10/devicetree.cb deleted file mode 100644 index dc611a6051..0000000000 --- a/src/mainboard/amd/bimini_fam10/devicetree.cb +++ /dev/null @@ -1,108 +0,0 @@ - # sample config for amd/bimini_fam10 -chip northbridge/amd/amdfam10/root_complex - device lapic_cluster 0 on - chip cpu/amd/socket_ASB2 #L1 and DDR3 - device lapic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 off end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 on end # PCIE P2P bridge 0x9605 - device pci 6.0 on end # PCIE P2P bridge 0x9606 - device pci 7.0 on end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 off end # - register "gppsb_configuration" = "4" # Configuration E - register "gpp_configuration" = "2" # Configuration C - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/cimx_wrapper/sb800 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.4 off end # PCI 0x4384 # PCI-b conflict with GPIO. - device pci 14.5 on end # USB 2 - device pci 14.6 on end # Gec - device pci 15.0 on end # PCIe 0 - device pci 15.1 on end # PCIe 1 - device pci 15.2 on end # PCIe 2 - device pci 15.3 on end # PCIe 3 - device pci 16.0 on end # USB - device pci 16.2 on end # USB - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - register "gpp_configuration" = "4" - end #southbridge/amd/cimx_wrapper/sb800 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end #pci_domain - #for node 32 to node 63 -# device pci_domain 0 on -# chip northbridge/amd/amdfam10 -# device pci 00.0 on end# northbridge -# device pci 00.0 on end -# device pci 00.0 on end -# device pci 00.0 on end -# device pci 00.1 on end -# device pci 00.2 on end -# device pci 00.3 on end -# device pci 00.4 on end -# device pci 00.5 on end -# end -# end #pci_domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 off end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # hard reset -# device pnp 0.9 off end # mcp55 -# device pnp 0.a on end # GH ext table -# end - -end diff --git a/src/mainboard/amd/bimini_fam10/dsdt.asl b/src/mainboard/amd/bimini_fam10/dsdt.asl deleted file mode 100644 index 3ff6dabf88..0000000000 --- a/src/mainboard/amd/bimini_fam10/dsdt.asl +++ /dev/null @@ -1,1824 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "BIMINI ", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include "../../../arch/x86/acpi/debug.asl" */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (\_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h. */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PIRA, 0x00000008, /* Index 0 */ - PIRB, 0x00000008, /* Index 1 */ - PIRC, 0x00000008, /* Index 2 */ - PIRD, 0x00000008, /* Index 3 */ - PIRE, 0x00000008, /* Index 4 */ - PIRF, 0x00000008, /* Index 5 */ - PIRG, 0x00000008, /* Index 6 */ - PIRH, 0x00000008, /* Index 7 */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(\_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(\_SB) { - - Method(CkOT, 0){ - - if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */ - - if(CondRefOf(\_OSI,Local1)) - { - Store(1, OSTP) /* Assume some form of XP */ - if (\_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSTP) - } - } else { - If(WCMP(\_OS,"Linux")) { - Store(3, OSTP) /* Linux */ - } Else { - Store(4, OSTP) /* Gotta be WinCE */ - } - } - Return(OSTP) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PIRA) - Store(0, PIRB) - Store(0, PIRC) - Store(0, PIRD) - Store(0, PIRE) - Store(0, PIRF) - Store(0, PIRG) - Store(0, PIRH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PIRA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PIRA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PIRB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PIRB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PIRC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PIRC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIRD) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIRD) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRD, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRD) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PIRE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PIRE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PIRF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PIRF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PIRG) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PIRG) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRG, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRG) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PIRH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PIRH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(\_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * \_GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(\_GTS, 1) { - * DBGO("\\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * \_BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) - } /* End Method(\_WAK) */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\\_GPE\\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\\_GPE\\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - /* Notify (\_TZ.TZ00, 0x80) */ - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\\_GPE\\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\\_GPE\\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(\_SB) { /* Start \_SB scope */ - #include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - Device(PE20) { - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE0) } /* APIC mode */ - Return (PE0) /* PIC Mode */ - } /* end _PRT */ - } /* end PE20 */ - Device(PE21) { - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE1) } /* APIC mode */ - Return (PE1) /* PIC Mode */ - } /* end _PRT */ - } /* end PE21 */ - Device(PE22) { - Name(_ADR, 0x00150002) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE2) } /* APIC mode */ - Return (APE2) /* PIC Mode */ - } /* end _PRT */ - } /* end PE22 */ - Device(PE23) { - Name(_ADR, 0x00150003) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE3) } /* APIC mode */ - Return (PE3) /* PIC Mode */ - } /* end _PRT */ - } /* end PE23 */ - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00120000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00120002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00160000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UOH6) { - Name(_ADR, 0x00160002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00140005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSTP,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x00, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x00, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x00, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x00, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) -#if 0 - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0xFFFFFFFF, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0xFFFFFFFF, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\\_SB\\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \\_OS=") */ - /* DBGO(\_OS) */ - /* DBGO("\n \\_REV=") */ - /* DBGO(\_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - CkOT() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ -#if 0 - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shaow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -#endif -} -/* End of ASL file */ diff --git a/src/mainboard/amd/bimini_fam10/fadt.c b/src/mainboard/amd/bimini_fam10/fadt.c deleted file mode 100644 index f3802a0f75..0000000000 --- a/src/mainboard/amd/bimini_fam10/fadt.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "pmio.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb acpi */ -/* pm_base should be got from bar2 of rs780. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 1; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, "COREBOOT", 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x60, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x61, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x62, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x63, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x64, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x65, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x68, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x69, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in \_PR.CPU0, 6 bytes */ - pm_iowrite(0x66, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x67, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x6A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x6B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x6C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x6D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x74, 1<<0 | 1<<1 | 1<<4 | 1<<2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 60-6B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/amd/bimini_fam10/get_bus_conf.c b/src/mainboard/amd/bimini_fam10/get_bus_conf.c deleted file mode 100644 index e53aef5109..0000000000 --- a/src/mainboard/amd/bimini_fam10/get_bus_conf.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdfam10_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -int bus_isa; -u8 bus_rs780[11]; -u8 bus_sb800[3]; -u32 apicid_sb800; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 bus_type[256]; - -u32 sbdn_rs780; -u32 sbdn_sb800; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i, j; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb800 = 0; - - for (i = 0; i < 3; i++) { - bus_sb800[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - for (i = 0; i < 256; i++) { - bus_type[i] = 0; /* default ISA bus. */ - } - - bus_type[0] = 1; /* pci */ - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = bus_rs780[0]; - - bus_type[bus_rs780[0]] = 1; - - /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); - if (dev) { - bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - for (j = bus_sb800[1]; j < bus_isa; j++) - bus_type[j] = 1; - } - - for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i)); - if (dev) { - bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - } - for (j = bus_sb800[2]; j < bus_isa; j++) - bus_type[j] = 1; - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - if(255 != bus_rs780[i]) { - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - bus_type[bus_rs780[i]] = 1; /* PCI bus. */ - } - } - } - - /* I/O APICs: APIC ID Version State Address */ - bus_isa = 10; -#if CONFIG_LOGICAL_CPUS==1 - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb800 = apicid_base + 0; -} diff --git a/src/mainboard/amd/bimini_fam10/irq_tables.c b/src/mainboard/amd/bimini_fam10/irq_tables.c deleted file mode 100644 index 9825559b66..0000000000 --- a/src/mainboard/amd/bimini_fam10/irq_tables.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam10_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_isa; -extern u8 bus_rs780[8]; -extern u8 bus_sb800[2]; -extern unsigned long sbdn_sb800; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/amd/bimini_fam10/mainboard.c b/src/mainboard/amd/bimini_fam10/mainboard.c deleted file mode 100644 index 11667d1dd1..0000000000 --- a/src/mainboard/amd/bimini_fam10/mainboard.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <boot/tables.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -//#include <southbridge/amd/sb800/sb800.h> -#include "pmio.h" -#include "chip.h" - -uint64_t uma_memory_base, uma_memory_size; - -u8 is_dev3_present(void); -void set_pcie_dereset(void); -void set_pcie_reset(void); -void enable_int_gfx(void); - -/* GPIO6. */ -void enable_int_gfx(void) -{ - u8 byte; - - volatile u8 *gpio_reg; - - pm_iowrite(0xEA, 0x01); /* diable the PCIB */ - /* Disable Gec */ - byte = pm_ioread(0xF6); - byte |= 1; - pm_iowrite(0xF6, byte); - /* make sure the fed80000 is accessible */ - byte = pm_ioread(0x24); - byte |= 1; - pm_iowrite(0x24, byte); - - gpio_reg = (volatile u8 *)0xFED80000 + 0xD00; /* IoMux Register */ - - *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */ - *(gpio_reg + 170) = 0x1; /* gpio_gate */ - - gpio_reg = (volatile u8 *)0xFED80000 + 0x100; /* GPIO Registers */ - - *(gpio_reg + 0x6) = 0x8; - *(gpio_reg + 170) = 0x0; -} - -/* - * Bimini uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to - * pull it up before training the slot. - ***/ -void set_pcie_dereset(void) -{ - /* GPIO 50h reset PCIe slot */ -/* - u8 *addr = (u8 *)(0xFED80000 + 0x100 + 0x50); - u8 byte = ~(1 << 5); - byte |= ~(1 << 6); - *addr = byte; -*/ -} - -void set_pcie_reset(void) -{ - /* GPIO 50h reset PCIe slot */ -/* - u8 *addr = (u8 *)(0xFED80000 + 0x100 + 0x50); - u8 byte = ~((1 << 5) | (1 << 6)); - *addr = byte; -*/ -} - -u8 is_dev3_present(void) -{ - return 0; -} - -#if 0 /* not tested yet. */ -/******************************************************** -* bimini uses SB800 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void get_ide_dma66(void) -{ - u8 byte; - /*u32 sm_dev, ide_dev; */ - device_t sm_dev, ide_dev; - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - pci_write_config8(ide_dev, 0x56, byte); -} -#endif /* get_ide_dma66() */ - -/************************************************* -* enable the dedicated function in bimini board. -* This function called early than rs780_enable. -*************************************************/ -static void bimini_enable(device_t dev) -{ - /* Leave it for furture use. */ - /* struct mainboard_config *mainboard = - (struct mainboard_config *)dev->chip_info; */ - - printk(BIOS_INFO, "Mainboard BIMINI Enable. dev=0x%p\n", dev); - -#if (CONFIG_GFXUMA == 1) - msr_t msr, msr2; - - /* TOP_MEM: the top of DRAM below 4G */ - msr = rdmsr(TOP_MEM); - printk - (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", - __func__, msr.lo, msr.hi); - - /* TOP_MEM2: the top of DRAM above 4G */ - msr2 = rdmsr(TOP_MEM2); - printk - (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", - __func__, msr2.lo, msr2.hi); - - /* refer to UMA Size Consideration in 780 BDG. */ - switch (msr.lo) { - case 0x10000000: /* 256M system memory */ - uma_memory_size = 0x4000000; /* 64M recommended UMA */ - break; - - case 0x20000000: /* 512M system memory */ - uma_memory_size = 0x8000000; /* 128M recommended UMA */ - break; - - default: /* 1GB and above system memory */ - uma_memory_size = 0x10000000; /* 256M recommended UMA */ - break; - } - - uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", - __func__, uma_memory_size, uma_memory_base); - - /* TODO: TOP_MEM2 */ -#else - uma_memory_size = 0x8000000; /* 128M recommended UMA */ - uma_memory_base = 0x38000000; /* 1GB system memory supposed */ -#endif - - set_pcie_dereset(); - enable_int_gfx(); - /* get_ide_dma66(); */ -} - -int add_mainboard_resources(struct lb_memory *mem) -{ - /* UMA is removed from system memory in the northbridge code, but - * in some circumstances we want the memory mentioned as reserved. - */ -#if (CONFIG_GFXUMA == 1) - printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", - uma_memory_base, uma_memory_size); - lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, - uma_memory_size); -#endif - return 0; -} - -struct chip_operations mainboard_ops = { - CHIP_NAME("AMD Bimini Mainboard") - .enable_dev = bimini_enable, -}; diff --git a/src/mainboard/amd/bimini_fam10/mb_sysconf.h b/src/mainboard/amd/bimini_fam10/mb_sysconf.h deleted file mode 100644 index 1f4e715376..0000000000 --- a/src/mainboard/amd/bimini_fam10/mb_sysconf.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - u8 bus_isa; - u8 bus_8132_0; - u8 bus_8132_1; - u8 bus_8132_2; - u8 bus_8111_0; - u8 bus_8111_1; - u8 bus_8132a[31][3]; - u8 bus_8151[31][2]; - - u32 apicid_8111; - u32 apicid_8132_1; - u32 apicid_8132_2; - u32 apicid_8132a[31][2]; - u32 sbdn3; - u32 sbdn3a[31]; - u32 sbdn5[31]; - u32 bus_type[256]; -}; - -#endif diff --git a/src/mainboard/amd/bimini_fam10/mptable.c b/src/mainboard/amd/bimini_fam10/mptable.c deleted file mode 100644 index c14e769b41..0000000000 --- a/src/mainboard/amd/bimini_fam10/mptable.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include "pmio.h" -#include <cpu/amd/amdfam10_sysconf.h> - -extern int bus_isa; -extern u8 bus_rs780[11]; -extern u8 bus_sb800[2]; -extern u32 apicid_sb800; -extern u32 bus_type[256]; -extern u32 sbdn_rs780; -extern u32 sbdn_sb800; - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - u32 dword; - u8 byte; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LAPIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - - dword = 0; - dword = pm_ioread(0x34) & 0xF0; - dword |= (pm_ioread(0x35) & 0xFF) << 8; - dword |= (pm_ioread(0x36) & 0xFF) << 16; - dword |= (pm_ioread(0x37) & 0xFF) << 24; - smp_write_ioapic(mc, apicid_sb800, 0x11, dword); - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) -#else -#define PCI_INT(bus, dev, fn, pin) -#endif - - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* HD Audio: */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - /* PCI_INT(bus_rs780[0x1], 0x5, 0x0, 0x12); */ -/* PCI_INT(bus_rs780[0x1], 0x5, 0x1, 0x13); */ - PCI_INT(bus_rs780[0x2], 0x0, 0x0, 0x12); /* Dev 2, external GFX */ - /* PCI_INT(bus_rs780[0x3], 0x0, 0x0, 0x13); */ - PCI_INT(bus_rs780[0x4], 0x0, 0x0, 0x10); - /* configuration B doesnt need dev 5,6,7 */ - /* - * PCI_INT(bus_rs780[0x5], 0x0, 0x0, 0x11); - * PCI_INT(bus_rs780[0x6], 0x0, 0x0, 0x12); - * PCI_INT(bus_rs780[0x7], 0x0, 0x0, 0x13); - */ - PCI_INT(bus_rs780[0x9], 0x0, 0x0, 0x11); - PCI_INT(bus_rs780[0xA], 0x0, 0x0, 0x12); /* NIC */ - - /* PCI slots */ - /* PCI_SLOT 0. */ - PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14); - PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15); - PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16); - PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15); - PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16); - PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17); - PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16); - PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17); - PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14); - PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - mc->mpe_checksum = - smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", - mc, smp_next_mpe_entry(mc)); - return smp_next_mpe_entry(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/bimini_fam10/pmio.c b/src/mainboard/amd/bimini_fam10/pmio.c deleted file mode 100644 index 3f1efd3895..0000000000 --- a/src/mainboard/amd/bimini_fam10/pmio.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pmio.h" - -static void pmio_write_index(u16 port_base, u8 reg, u8 value) -{ - outb(reg, port_base); - outb(value, port_base + 1); -} - -static u8 pmio_read_index(u16 port_base, u8 reg) -{ - outb(reg, port_base); - return inb(port_base + 1); -} - -void pm_iowrite(u8 reg, u8 value) -{ - pmio_write_index(PM_INDEX, reg, value); -} - -u8 pm_ioread(u8 reg) -{ - return pmio_read_index(PM_INDEX, reg); -} - -void pm2_iowrite(u8 reg, u8 value) -{ - pmio_write_index(PM2_INDEX, reg, value); -} - -u8 pm2_ioread(u8 reg) -{ - return pmio_read_index(PM2_INDEX, reg); -} diff --git a/src/mainboard/amd/bimini_fam10/pmio.h b/src/mainboard/amd/bimini_fam10/pmio.h deleted file mode 100644 index ae5f0f983f..0000000000 --- a/src/mainboard/amd/bimini_fam10/pmio.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PMIO_H_ -#define _PMIO_H_ - -#define PM_INDEX 0xCD6 -#define PM_DATA 0xCD7 -#define PM2_INDEX 0xCD0 -#define PM2_DATA 0xCD1 - -void pm_iowrite(u8 reg, u8 value); -u8 pm_ioread(u8 reg); -void pm2_iowrite(u8 reg, u8 value); -u8 pm2_ioread(u8 reg); - -#endif diff --git a/src/mainboard/amd/bimini_fam10/reset.c b/src/mainboard/amd/bimini_fam10/reset.c deleted file mode 100644 index 0b32bedb36..0000000000 --- a/src/mainboard/amd/bimini_fam10/reset.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <reset.h> -#include <arch/io.h> -#include <arch/romcc_io.h> - -#define HT_INIT_CONTROL 0x6C -#define HTIC_BIOSR_Detect (1<<5) - -#if CONFIG_MAX_PHYSICAL_CPUS > 32 -#define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn))) -#else -#define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn) -#endif - -static inline void set_bios_reset(void) -{ - u32 nodes, htic; - device_t dev; - int i; - - nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1; - for (i = 0; i < nodes; i++) { - dev = NODE_PCI(i, 0); - htic = pci_read_config32(dev, HT_INIT_CONTROL); - htic &= ~HTIC_BIOSR_Detect; - pci_write_config32(dev, HT_INIT_CONTROL, htic); - } -} - -void hard_reset(void) -{ - set_bios_reset(); - /* Try rebooting through port 0xcf9 */ - /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */ - outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9); - outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9); -} - -//SbReset(); -void soft_reset(void) -{ - set_bios_reset(); - /* link reset */ - outb(0x06, 0x0cf9); -} diff --git a/src/mainboard/amd/bimini_fam10/resourcemap.c b/src/mainboard/amd/bimini_fam10/resourcemap.c deleted file mode 100644 index 7a50f90f4d..0000000000 --- a/src/mainboard/amd/bimini_fam10/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/amd/bimini_fam10/romstage.c b/src/mainboard/amd/bimini_fam10/romstage.c deleted file mode 100644 index 503ddea951..0000000000 --- a/src/mainboard/amd/bimini_fam10/romstage.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/romcc_io.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "cpu/x86/lapic/boot_cpu.c" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/mtrr/earlymtrr.c" -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include <SbEarly.h> -#include <SBPLATFORM.h> /* SB OEM constants */ -#include <southbridge/amd/cimx_wrapper/sb800/smbus.h> -#include "northbridge/amd/amdfam10/debug.c" - -static void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/car/post_cache_as_ram.c" -#include "cpu/amd/microcode/microcode.c" -#include "cpu/amd/model_10xxx/update_microcode.c" -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" - -#define RC00 0 -#define RC01 1 - -#define DIMM0 0x50 -#define DIMM1 0x51 -#define DIMM2 0x52 -#define DIMM3 0x53 - -#include <reset.h> -void soft_reset(void) -{ - set_bios_reset(); - /* link reset */ - outb(0x06, 0x0cf9); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx); -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - //enable port80 decoding and southbridge poweron init - sb_poweron_init(); - SbStall(200); //wait 200us, bimini must wait otherwise need to reset. - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - - uart_init(); - console_init(); - printk(BIOS_DEBUG, "\n"); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS==1 - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - -#if CONFIG_SET_FIDVID == 1 - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ - //enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); -#endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// ram_check(0x00200000, 0x00200000 + (640 * 1024)); -// ram_check(0x40200000, 0x40200000 + (640 * 1024)); - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} |