diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/northbridge/intel/i945/early_init.c | 4 | ||||
| -rw-r--r-- | src/northbridge/intel/i945/raminit.c | 22 | ||||
| -rw-r--r-- | src/southbridge/intel/i82801gx/i82801gx.h | 1 |
3 files changed, 14 insertions, 13 deletions
diff --git a/src/northbridge/intel/i945/early_init.c b/src/northbridge/intel/i945/early_init.c index 274296d482..84d9c105d6 100644 --- a/src/northbridge/intel/i945/early_init.c +++ b/src/northbridge/intel/i945/early_init.c @@ -158,10 +158,10 @@ static void i945_setup_bars(void) printk(BIOS_DEBUG, "Setting up static southbridge registers..."); pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x44, 0x80); /* ACPI_CNTL: Enable ACPI BAR */ + pci_write_config8(PCI_DEV(0, 0x1f, 0), ACPI_CNTL, ACPI_EN); pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c, 0x10); /* GC: Enable GPIOs */ + pci_write_config8(PCI_DEV(0, 0x1f, 0), GPIO_CNTL, GPIO_EN); setup_pch_gpios(&mainboard_gpio_map); printk(BIOS_DEBUG, " done.\n"); diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c index 0cf03ae605..74407c14ff 100644 --- a/src/northbridge/intel/i945/raminit.c +++ b/src/northbridge/intel/i945/raminit.c @@ -247,13 +247,13 @@ static void sdram_detect_errors(struct sys_info *sysinfo) u8 reg8; u8 do_reset = 0; - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2); if (reg8 & ((1<<7)|(1<<2))) { if (reg8 & (1<<2)) { printk(BIOS_DEBUG, "SLP S4# Assertion Width Violation.\n"); /* Write back clears bit 2 */ - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); + pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, reg8); do_reset = 1; } @@ -261,14 +261,14 @@ static void sdram_detect_errors(struct sys_info *sysinfo) if (reg8 & (1<<7)) { printk(BIOS_DEBUG, "DRAM initialization was interrupted.\n"); reg8 &= ~(1<<7); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); + pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, reg8); do_reset = 1; } /* Set SLP_S3# Assertion Stretch Enable */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); /* GEN_PMCON_3 */ + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); reg8 |= (1 << 3); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); + pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); if (do_reset) { printk(BIOS_DEBUG, "Reset required.\n"); @@ -277,9 +277,9 @@ static void sdram_detect_errors(struct sys_info *sysinfo) } /* Set DRAM initialization bit in ICH7 */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2); reg8 |= (1<<7); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); + pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, reg8); /* clear self refresh status if check is disabled or not a resume */ if (!CONFIG(CHECK_SLFRCS_ON_RESUME) @@ -1807,9 +1807,9 @@ static void sdram_program_memory_frequency(struct sys_info *sysinfo) */ goto cache_code; vco_update: - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2); reg8 &= ~(1 << 7); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); + pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, reg8); clkcfg &= ~(1 << 10); MCHBAR32(CLKCFG) = clkcfg; @@ -2813,9 +2813,9 @@ void sdram_initialize(int boot_path, const u8 *spd_addresses) sdram_enable_rcomp(); /* Tell ICH7 that we're done */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2); reg8 &= ~(1 << 7); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); + pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, reg8); printk(BIOS_DEBUG, "RAM initialization finished.\n"); diff --git a/src/southbridge/intel/i82801gx/i82801gx.h b/src/southbridge/intel/i82801gx/i82801gx.h index b693b75ccf..a91ffc500b 100644 --- a/src/southbridge/intel/i82801gx/i82801gx.h +++ b/src/southbridge/intel/i82801gx/i82801gx.h @@ -94,6 +94,7 @@ int smbus_block_write(unsigned int device, unsigned int cmd, u8 bytes, #define BIOS_CNTL 0xDC #define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ #define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ +#define GPIO_EN (1 << 4) #define PIRQA_ROUT 0x60 #define PIRQB_ROUT 0x61 |