summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/soc/rockchip/common/uart.c144
-rw-r--r--src/soc/rockchip/rk3288/Kconfig2
-rw-r--r--src/soc/rockchip/rk3399/Kconfig2
3 files changed, 6 insertions, 142 deletions
diff --git a/src/soc/rockchip/common/uart.c b/src/soc/rockchip/common/uart.c
index 5e1f8ef467..d2115da5e8 100644
--- a/src/soc/rockchip/common/uart.c
+++ b/src/soc/rockchip/common/uart.c
@@ -13,151 +13,15 @@
* GNU General Public License for more details.
*/
-#include <arch/io.h>
-#include <boot/coreboot_tables.h>
-#include <console/console.h> /* for __console definition */
#include <console/uart.h>
-#include <drivers/uart/uart8250reg.h>
#include <stdint.h>
-/*
- * TODO: Use DRIVERS_UART_8250MEM driver instead.
- * There is an issue in the IO call functions where x86 and ARM
- * ordering is reversed. This 8250MEM driver uses the x86 convention.
- * This driver can be replaced once the IO calls are sorted.
- */
-
-struct rk_uart {
- union {
- uint32_t thr; /* Transmit holding register. */
- uint32_t rbr; /* Receive buffer register. */
- uint32_t dll; /* Divisor latch lsb. */
- };
- union {
- uint32_t ier; /* Interrupt enable register. */
- uint32_t dlm; /* Divisor latch msb. */
- };
- union {
- uint32_t iir; /* Interrupt identification register. */
- uint32_t fcr; /* FIFO control register. */
- };
- uint32_t lcr; /* Line control register. */
- uint32_t mcr; /* Modem control register. */
- uint32_t lsr; /* Line status register. */
- uint32_t msr; /* Modem status register. */
- uint32_t scr;
- uint32_t reserved1[(0x30 - 0x20) / 4];
- uint32_t srbr[(0x70 - 0x30) / 4];
- uint32_t far;
- uint32_t tfr;
- uint32_t rfw;
- uint32_t usr;
- uint32_t tfl;
- uint32_t rfl;
- uint32_t srr;
- uint32_t srts;
- uint32_t sbcr;
- uint32_t sdmam;
- uint32_t sfe;
- uint32_t srt;
- uint32_t stet;
- uint32_t htx;
- uint32_t dmasa;
- uint32_t reserver2[(0xf4 - 0xac) / 4];
- uint32_t cpr;
- uint32_t ucv;
- uint32_t ctr;
-} __attribute__ ((packed));
-
-
-static struct rk_uart * const uart_ptr =
- (void *)CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
-
-static void rk_uart_tx_flush(void);
-static int rk_uart_tst_byte(void);
-
-static void rk_uart_init(void)
-{
- /* FIXME: Use a hardcoded divisor for now.
- * uint16_t divisor = (u16) uart_baudrate_divisor(default_baudrate(),
- * uart_platform_refclk(), 16)
- */
- const unsigned divisor = 13;
- const uint8_t line_config = UART8250_LCR_WLS_8; // 8n1
-
- rk_uart_tx_flush();
-
- // Disable interrupts.
- write32(&uart_ptr->ier, 0);
- // Force DTR and RTS to high.
- write32(&uart_ptr->mcr, UART8250_MCR_DTR | UART8250_MCR_RTS);
- // Set line configuration, access divisor latches.
- write32(&uart_ptr->lcr, UART8250_LCR_DLAB | line_config);
- // Set the divisor.
- write32(&uart_ptr->dll, divisor & 0xff);
- write32(&uart_ptr->dlm, (divisor >> 8) & 0xff);
- // Hide the divisor latches.
- write32(&uart_ptr->lcr, line_config);
- // Enable FIFOs, and clear receive and transmit.
- write32(&uart_ptr->fcr, UART8250_FCR_FIFO_EN |
- UART8250_FCR_CLEAR_RCVR | UART8250_FCR_CLEAR_XMIT);
-}
-
-static void rk_uart_tx_byte(unsigned char data)
-{
- while (!(read32(&uart_ptr->lsr) & UART8250_LSR_THRE));
- write32(&uart_ptr->thr, data);
-}
-
-static void rk_uart_tx_flush(void)
-{
- while (!(read32(&uart_ptr->lsr) & UART8250_LSR_TEMT));
-}
-
-static unsigned char rk_uart_rx_byte(void)
+unsigned int uart_platform_refclk(void)
{
- if (!rk_uart_tst_byte())
- return 0;
- return read32(&uart_ptr->rbr);
+ return 23040000;
}
-static int rk_uart_tst_byte(void)
+uintptr_t uart_platform_base(int idx)
{
- return (read32(&uart_ptr->lsr) & UART8250_LSR_DR) == UART8250_LSR_DR;
-}
-
-
-
-void uart_init(int idx)
-{
- rk_uart_init();
-}
-
-unsigned char uart_rx_byte(int idx)
-{
- return rk_uart_rx_byte();
-}
-
-void uart_tx_byte(int idx, unsigned char data)
-{
- rk_uart_tx_byte(data);
-}
-
-void uart_tx_flush(int idx)
-{
- rk_uart_tx_flush();
-}
-
-#ifndef __PRE_RAM__
-void uart_fill_lb(void *data)
-{
- struct lb_serial serial;
- serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED;
- serial.baseaddr = CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
- serial.baud = default_baudrate();
- serial.regwidth = 4;
- lb_add_serial(&serial, data);
-
- lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data);
+ return CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
}
-#endif
diff --git a/src/soc/rockchip/rk3288/Kconfig b/src/soc/rockchip/rk3288/Kconfig
index 0f39f75be2..8b15d3dc45 100644
--- a/src/soc/rockchip/rk3288/Kconfig
+++ b/src/soc/rockchip/rk3288/Kconfig
@@ -20,9 +20,9 @@ config SOC_ROCKCHIP_RK3288
select ARCH_VERSTAGE_ARMV7
select ARCH_ROMSTAGE_ARMV7
select ARCH_RAMSTAGE_ARMV7
+ select DRIVERS_UART_8250MEM_32
select HAVE_MONOTONIC_TIMER
select GENERIC_UDELAY
- select HAVE_UART_SPECIAL
select BOOTBLOCK_CONSOLE
select UNCOMPRESSED_RAMSTAGE
select GENERIC_GPIO_LIB
diff --git a/src/soc/rockchip/rk3399/Kconfig b/src/soc/rockchip/rk3399/Kconfig
index 0c1f258ded..283f6c2c9e 100644
--- a/src/soc/rockchip/rk3399/Kconfig
+++ b/src/soc/rockchip/rk3399/Kconfig
@@ -7,9 +7,9 @@ config SOC_ROCKCHIP_RK3399
select ARCH_VERSTAGE_ARMV8_64
select ARM64_A53_ERRATUM_843419
select BOOTBLOCK_CONSOLE
+ select DRIVERS_UART_8250MEM_32
select GENERIC_UDELAY
select HAVE_MONOTONIC_TIMER
- select HAVE_UART_SPECIAL
select UNCOMPRESSED_RAMSTAGE
if SOC_ROCKCHIP_RK3399