summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/arch/armv7/include/arch/cpu.h6
-rw-r--r--src/cpu/samsung/exynos5420/Kconfig9
-rw-r--r--src/cpu/samsung/exynos5420/Makefile.inc1
-rw-r--r--src/cpu/samsung/exynos5420/cpu.h6
-rw-r--r--src/cpu/samsung/exynos5420/smp.c305
-rw-r--r--src/mainboard/google/pit/romstage.c1
6 files changed, 324 insertions, 4 deletions
diff --git a/src/arch/armv7/include/arch/cpu.h b/src/arch/armv7/include/arch/cpu.h
index 2613025348..ec37a969ce 100644
--- a/src/arch/armv7/include/arch/cpu.h
+++ b/src/arch/armv7/include/arch/cpu.h
@@ -98,4 +98,10 @@ inline static void sev(void)
asm volatile ("sev");
}
+/* puts CPU into SVC32 mode and disable interrupts. */
+inline static void set_svc32_mode(void)
+{
+ asm volatile("msr cpsr_c, %0" :: "r"(0x13 | 0xc0));
+}
+
#endif /* __ARCH_CPU_H__ */
diff --git a/src/cpu/samsung/exynos5420/Kconfig b/src/cpu/samsung/exynos5420/Kconfig
index d7adf6cfde..606604091b 100644
--- a/src/cpu/samsung/exynos5420/Kconfig
+++ b/src/cpu/samsung/exynos5420/Kconfig
@@ -46,6 +46,11 @@ config CBFS_ROM_OFFSET
# 0x0202_4400: variable length bootblock checksum header.
# 0x0202_4410: bootblock, assume up to 32KB in size
# 0x0203_0000: romstage, assume up to 128KB in size.
+# 0x0206_0000: cache for CBFS data.
+# 0x0207_3000: shared (with kernel) page for cpu & secondary core states.
+# the shared data is currently only <0x50 bytes so we can share
+# this page with stack.
+# 0x0207_3100: stack bottom
# 0x0207_4000: stack pointer
config BOOTBLOCK_BASE
@@ -71,11 +76,11 @@ config STACK_TOP
config STACK_BOTTOM
hex
- default 0x02073000
+ default 0x02073100
config STACK_SIZE
hex
- default 0x1000
+ default 0x0f00
# TODO We may probably move this to board-specific implementation files instead
# of KConfig values.
diff --git a/src/cpu/samsung/exynos5420/Makefile.inc b/src/cpu/samsung/exynos5420/Makefile.inc
index 279e803a4c..319162707b 100644
--- a/src/cpu/samsung/exynos5420/Makefile.inc
+++ b/src/cpu/samsung/exynos5420/Makefile.inc
@@ -17,6 +17,7 @@ bootblock-y += gpio.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += timer.c
romstage-y += spi.c
+romstage-y += smp.c
romstage-y += clock.c
romstage-y += clock_init.c
romstage-y += pinmux.c # required by s3c24x0_i2c and uart.
diff --git a/src/cpu/samsung/exynos5420/cpu.h b/src/cpu/samsung/exynos5420/cpu.h
index 22ef8dbf40..08f315a57d 100644
--- a/src/cpu/samsung/exynos5420/cpu.h
+++ b/src/cpu/samsung/exynos5420/cpu.h
@@ -224,8 +224,6 @@
#define EXYNOS5_SPI_NUM_CONTROLLERS 5
#define EXYNOS_I2C_MAX_CONTROLLERS 8
-void exynos5420_config_l2_cache(void);
-
extern struct tmu_info exynos5420_tmu_info;
/* TODO clean up defines. */
@@ -264,4 +262,8 @@ static inline u32 get_fb_base_kb(void)
return RAM_BASE_KB + RAM_SIZE_KB - FB_SIZE_KB;
}
+/* Procedures to setup Exynos5420 CPU */
+void exynos5420_config_l2_cache(void);
+void exynos5420_config_smp(void);
+
#endif /* _EXYNOS5420_CPU_H */
diff --git a/src/cpu/samsung/exynos5420/smp.c b/src/cpu/samsung/exynos5420/smp.c
new file mode 100644
index 0000000000..392f82d097
--- /dev/null
+++ b/src/cpu/samsung/exynos5420/smp.c
@@ -0,0 +1,305 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <arch/cpu.h>
+#include <arch/io.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <cpu/samsung/exynos5420/cpu.h>
+#include <cpu/samsung/exynos5420/power.h>
+
+/* ACTLR, L2CTLR L2ACTLR constants used in SMP core power up. */
+
+#define ACTLR_SMP (1 << 6)
+
+#define L2CTLR_ECC_PARITY (1 << 21)
+#define L2CTLR_DATA_RAM_LATENCY_MASK (7 << 0)
+#define L2CTLR_TAG_RAM_LATENCY_MASK (7 << 6)
+#define L2CTLR_DATA_RAM_LATENCY_CYCLES_3 (2 << 0)
+#define L2CTLR_TAG_RAM_LATENCY_CYCLES_3 (2 << 6)
+
+#define L2ACTLR_DISABLE_CLEAN_EVICT_PUSH_EXTERNAL (1 << 3)
+#define L2ACTLR_ENABLE_HAZARD_DETECT_TIMEOUT (1 << 7)
+#define L2ACTLR_FORCE_L2_LOGIC_CLOCK_ENABLE_ACTIVE (1 << 27)
+
+/* Part number in CPU ID (MPIDR). */
+#define PART_NUMBER_CORTEX_A15 (0xc0f)
+
+/* State of CPU cores in Exynos 5420. */
+#define CORE_STATE_RESET (1 << 0)
+#define CORE_STATE_SECONDARY_RESET (1 << 1)
+#define CORE_STATE_SWITCH_CLUSTER (1 << 4)
+
+/* The default address to re-power on a code. */
+#define CORE_RESET_INIT_ADDRESS ((void*)0x00000000)
+
+/* Vectors in BL1 (0x02020000 = base of iRAM). */
+#define VECTOR_CORE_SEV_HANDLER ((void*)(intptr_t)0x02020004)
+#define VECTOR_LOW_POWER_FLAG ((void*)(intptr_t)0x02020028)
+#define VECTOR_LOW_POWER_ADDRESS ((void*)(intptr_t)0x0202002C)
+
+/* The data structure for the "CPU state" memory page (shared with kernel)
+ * controlling cores in active cluster. Kernel will put starting address for one
+ * core in "hotplug_address" before power on. Note the address is hard-coded in
+ * kernel (EXYNOS5420_PA_SYSRAM_NS = 0x02073000). */
+volatile struct exynos5420_cpu_states
+{
+ uint32_t _reserved[2]; /* RESV, +0x00 */
+ uint32_t resume_address; /* REG0, +0x08 */
+ uint32_t resume_flag; /* REG1, +0x0C */
+ uint32_t _reg2; /* REG2, +0x10 */
+ uint32_t _reg3; /* REG3, +0x14 */
+ uint32_t switch_address; /* REG4, +0x18, cluster switching */
+ uint32_t hotplug_address; /* REG5, +0x1C, core hotplug */
+ uint32_t _reg6; /* REG6, +0x20 */
+ uint32_t c2_address; /* REG7, +0x24, C2 state change */
+
+ /* Managed per core status for active cluster, offset: +0x28~0x38 */
+ uint32_t cpu_states[4];
+
+ /* Managed per core GIC status for active cluster, offset: 0x38~0x48 */
+ uint32_t cpu_gic_states[4];
+} *exynos_cpu_states = (volatile struct exynos5420_cpu_states*)0x02073000;
+
+/* When leaving core handlers and jump to hot-plug address (or cluster
+ * switching), we are not sure if the destination is Thumb or ARM mode.
+ * So a BX command is required.
+ */
+inline static void jump_bx(void *address)
+{
+ asm volatile ("bx %0" : : "r"(address));
+ /* never returns. */
+}
+
+/* Extracts arbitrary bits from a 32-bit unsigned int. */
+inline static uint32_t get_bits(uint32_t value, uint32_t start, uint32_t len)
+{
+ return ((value << (sizeof(value) * 8 - len - start)) >>
+ (sizeof(value) * 8 - len));
+}
+
+/* Waits the referenced address to be ready (non-zero) and then jump into it. */
+static void wait_and_jump(volatile uint32_t* reference)
+{
+ while (!*reference) {
+ wfe();
+ }
+ jump_bx((void*)*reference);
+}
+
+/* Configures L2 Control Register to use 3 cycles for DATA/TAG RAM latency. */
+static void configure_l2ctlr(void)
+{
+ uint32_t val;
+
+ val = read_l2ctlr();
+ val &= ~(L2CTLR_DATA_RAM_LATENCY_MASK | L2CTLR_TAG_RAM_LATENCY_MASK);
+ val |= (L2CTLR_DATA_RAM_LATENCY_CYCLES_3 | L2CTLR_TAG_RAM_LATENCY_CYCLES_3 |
+ L2CTLR_ECC_PARITY);
+ write_l2ctlr(val);
+}
+
+/* Configures L2 Auxiliary Control Register for Cortex A15. */
+static void configure_l2actlr(void)
+{
+ uint32_t val;
+
+ val = read_l2actlr();
+ val |= (L2ACTLR_DISABLE_CLEAN_EVICT_PUSH_EXTERNAL |
+ L2ACTLR_ENABLE_HAZARD_DETECT_TIMEOUT |
+ L2ACTLR_FORCE_L2_LOGIC_CLOCK_ENABLE_ACTIVE);
+ write_l2actlr(val);
+}
+
+/* Initializes the CPU states to reset state. */
+static void init_exynos_cpu_states(void) {
+ memset((void*)exynos_cpu_states, 0, sizeof(*exynos_cpu_states));
+ exynos_cpu_states->cpu_states[0] = CORE_STATE_RESET;
+ exynos_cpu_states->cpu_states[1] = CORE_STATE_SECONDARY_RESET;
+ exynos_cpu_states->cpu_states[2] = CORE_STATE_SECONDARY_RESET;
+ exynos_cpu_states->cpu_states[3] = CORE_STATE_SECONDARY_RESET;
+}
+
+/*
+ * Ensures that the L2 logic has been used within the previous 256 cycles
+ * before modifying the ACTLR.SMP bit. This is required during boot before
+ * MMU has been enabled, or during a specified reset or power down sequence.
+ */
+static void enable_smp(void)
+{
+ uint32_t actlr, val;
+
+ /* Enable SMP mode */
+ actlr = read_actlr();
+ actlr |= ACTLR_SMP;
+
+ /* Dummy read to assure L2 access */
+ val = readl((void*)INF_REG_BASE);
+ val &= 0;
+ actlr |= val;
+
+ write_actlr(actlr);
+ dsb();
+ isb();
+}
+
+/* Starts the core and jumps to correct location by its state. */
+static void core_start_execution(void)
+{
+ u32 cpu_id, cpu_state;
+ struct exynos5_power *power = samsung_get_base_power();
+
+ enable_smp();
+ set_svc32_mode();
+
+ cpu_id = read_mpidr() & 0x3; /* up to 4 processors for one cluster. */
+ cpu_state = exynos_cpu_states->cpu_states[cpu_id];
+
+ if (cpu_state & CORE_STATE_SWITCH_CLUSTER) {
+ wait_and_jump(&exynos_cpu_states->switch_address);
+ /* never returns. */
+ }
+
+ /* Standard Exynos suspend/resume. */
+ if (power->inform1) {
+ power->inform1 = 0;
+ jump_bx((void*)power->inform0);
+ /* never returns. */
+ }
+
+ if (cpu_state & CORE_STATE_RESET) {
+ /* For Reset, U-Boot jumps to its starting address;
+ * on Coreboot, seems ok to ignore for now. */
+ }
+ wait_and_jump(&exynos_cpu_states->hotplug_address);
+ /* never returns. */
+}
+
+/* The entry point for hotplug-in and cluster switching. */
+static void low_power_start(void)
+{
+ uint32_t sctlr, reg_val;
+
+ /* On warm reset, because iRAM is not cleared, all cores will enter
+ * low_power_start, not the initial address. So we need to check reset
+ * status again, and jump to 0x0 in that case. */
+ reg_val = readl((void*)RST_FLAG_REG);
+ if (reg_val != RST_FLAG_VAL) {
+ writel(0x0, VECTOR_LOW_POWER_FLAG);
+ jump_bx(CORE_RESET_INIT_ADDRESS);
+ /* restart cpu execution and never returns. */
+ }
+
+ /* Workaround for iROM EVT1. A7 core execution may flow into incorrect
+ * path, bypassing first jump address and makes final jump address 0x0,
+ * so we try to make any core set again low_power_start address, if that
+ * becomes zero. */
+ reg_val = readl(VECTOR_CORE_SEV_HANDLER);
+ if (reg_val != (intptr_t)low_power_start) {
+ writel((intptr_t)low_power_start, VECTOR_CORE_SEV_HANDLER);
+ dsb();
+ /* ask all cores to power on again. */
+ sev();
+ }
+
+ set_svc32_mode();
+
+ /* Whenever a Cortex A-15 core powers on, iROM resets its L2 cache
+ * so we need to configure again. */
+ if (get_bits(read_midr(), 4, 12) == PART_NUMBER_CORTEX_A15) {
+ configure_l2ctlr();
+ configure_l2actlr();
+ }
+
+ /* Invalidate L1 & TLB */
+ tlbiall();
+ iciallu();
+
+ /* Disable MMU stuff and caches */
+ sctlr = read_sctlr();
+ sctlr &= ~(SCTLR_V | SCTLR_M | SCTLR_C);
+ sctlr |= (SCTLR_I | SCTLR_Z | SCTLR_A);
+ write_sctlr(sctlr);
+
+ core_start_execution();
+ /* The core should not return. But in order to prevent unexpected
+ * errors, a WFI command will help to put CPU back to idle state. */
+ wfi();
+}
+
+/* Callback to shutdown a core, safe to be set as hot-plug address. */
+static void power_down_core(void)
+{
+ uint32_t mpidr, core_id;
+
+ /* MPIDR: 0~2=ID, 8~11=cluster. On Exynos 5420, cluster will be only 0
+ * or 1. */
+ mpidr = read_mpidr();
+ core_id = get_bits(mpidr, 0, 2) | (get_bits(mpidr, 8, 4) << 2);
+
+ /* Set the status of the core to low.
+ * S5E5420A User Manual, 8.8.1.202, ARM_CORE0_CONFIGURATION, two bits to
+ * control power state in each power down level.
+ */
+ writel(0x0, (void*)(ARM_CORE0_CONFIG + core_id * CORE_CONFIG_OFFSET));
+
+ /* S5E5420A User Manual, 8.4.2.5, after ARM_CORE*_CONFIGURATION has been
+ * set to zero, PMU will detect and wait for WFI then run power-down
+ * sequence. */
+ wfi();
+}
+
+/* Configures the CPU states shard memory page and then shutdown all cores. */
+static void configure_secondary_cores(void)
+{
+ configure_l2ctlr();
+
+ /* Currently we use power_down_core as callback for each core to
+ * shutdown itself, but it is also ok to directly set ARM_CORE*_CONFIG
+ * to zero by CPU0 because every secondary cores should be already in
+ * WFI state (in bootblock). The power_down_core will be more helpful
+ * when we want to use SMP inside firmware. */
+
+ /* Clear boot reg (hotplug address) in cpu states */
+ writel(0, (void*)&exynos_cpu_states->hotplug_address);
+
+ /* set low_power flag and address */
+ writel((intptr_t)low_power_start, VECTOR_LOW_POWER_ADDRESS);
+ writel(RST_FLAG_VAL, VECTOR_LOW_POWER_FLAG);
+ writel(RST_FLAG_VAL, (void*)RST_FLAG_REG);
+
+ /* On next SEV, shutdown all cores. */
+ writel((intptr_t)power_down_core, VECTOR_CORE_SEV_HANDLER);
+
+ /* Ask all cores in WFE mode to shutdown. */
+ dsb();
+ sev();
+}
+
+/* Configures the SMP cores on Exynos 5420 SOC (and shutdown all secondary
+ * cores) */
+void exynos5420_config_smp(void)
+{
+ init_exynos_cpu_states();
+ configure_secondary_cores();
+}
+
diff --git a/src/mainboard/google/pit/romstage.c b/src/mainboard/google/pit/romstage.c
index 7733eca1c7..7037112d04 100644
--- a/src/mainboard/google/pit/romstage.c
+++ b/src/mainboard/google/pit/romstage.c
@@ -246,6 +246,7 @@ void main(void)
int is_resume = (get_wakeup_state() != IS_NOT_WAKEUP);
int power_init_failed;
+ exynos5420_config_smp();
power_init_failed = setup_power(is_resume);
/* Clock must be initialized before console_init, otherwise you may need