summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/google/glados/Kconfig4
-rw-r--r--src/mainboard/google/glados/devicetree.cb (renamed from src/mainboard/google/glados/variants/lars/devicetree.cb)67
-rw-r--r--src/mainboard/google/glados/variants/asuka/devicetree.cb227
-rw-r--r--src/mainboard/google/glados/variants/asuka/overridetree.cb66
-rw-r--r--src/mainboard/google/glados/variants/caroline/devicetree.cb241
-rw-r--r--src/mainboard/google/glados/variants/caroline/overridetree.cb91
-rw-r--r--src/mainboard/google/glados/variants/cave/devicetree.cb232
-rw-r--r--src/mainboard/google/glados/variants/cave/overridetree.cb83
-rw-r--r--src/mainboard/google/glados/variants/chell/devicetree.cb228
-rw-r--r--src/mainboard/google/glados/variants/chell/overridetree.cb73
-rw-r--r--src/mainboard/google/glados/variants/glados/devicetree.cb234
-rw-r--r--src/mainboard/google/glados/variants/glados/overridetree.cb84
-rw-r--r--src/mainboard/google/glados/variants/lars/overridetree.cb67
-rw-r--r--src/mainboard/google/glados/variants/sentry/devicetree.cb249
-rw-r--r--src/mainboard/google/glados/variants/sentry/overridetree.cb91
15 files changed, 562 insertions, 1475 deletions
diff --git a/src/mainboard/google/glados/Kconfig b/src/mainboard/google/glados/Kconfig
index d0ff3776e0..5e3545a85c 100644
--- a/src/mainboard/google/glados/Kconfig
+++ b/src/mainboard/google/glados/Kconfig
@@ -60,9 +60,9 @@ config VARIANT_DIR
default "lars" if BOARD_GOOGLE_LARS
default "sentry" if BOARD_GOOGLE_SENTRY
-config DEVICETREE
+config OVERRIDE_DEVICETREE
string
- default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb"
+ default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config MAX_CPUS
int
diff --git a/src/mainboard/google/glados/variants/lars/devicetree.cb b/src/mainboard/google/glados/devicetree.cb
index 35ce9a0294..e9c1cac69c 100644
--- a/src/mainboard/google/glados/variants/lars/devicetree.cb
+++ b/src/mainboard/google/glados/devicetree.cb
@@ -77,18 +77,6 @@ chip soc/intel/skylake
# RP 1 uses SRCCLKREQ1#
register "PcieRpClkReqNumber[0]" = "1"
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
- register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
- register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
- register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # SD
- register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
-
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
-
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
@@ -127,23 +115,8 @@ chip soc/intel/skylake
device pci 14.0 on end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on end # Thermal Subsystem
- device pci 15.0 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0001""
- register "desc" = ""ELAN Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
- device i2c 10 on end
- end
- end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
- register "wake" = "GPE0_DW0_05"
- device i2c 15 on end
- end
- end # I2C #1
+ device pci 15.0 on end # I2C #0
+ device pci 15.1 on end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
@@ -154,30 +127,7 @@ chip soc/intel/skylake
device pci 17.0 off end # SATA
device pci 19.0 on end # UART #2
device pci 19.1 off end # I2C #5
- device pci 19.2 on
- chip drivers/i2c/nau8825
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
- register "jkdet_enable" = "1"
- register "jkdet_pull_enable" = "1"
- register "jkdet_pull_up" = "1"
- register "jkdet_polarity" = "1" # ActiveLow
- register "vref_impedance" = "2" # 125kOhm
- register "micbias_voltage" = "6" # 2.754
- register "sar_threshold_num" = "4"
- register "sar_threshold[0]" = "0x08"
- register "sar_threshold[1]" = "0x12"
- register "sar_threshold[2]" = "0x26"
- register "sar_threshold[3]" = "0x73"
- register "sar_hysteresis" = "0"
- register "sar_voltage" = "6"
- register "sar_compare_time" = "1" # 1us
- register "sar_sampling_time" = "1" # 4us
- register "short_key_debounce" = "3" # 30ms
- register "jack_insert_debounce" = "7" # 512ms
- register "jack_eject_debounce" = "0"
- device i2c 1a on end
- end
- end # I2C #4
+ device pci 19.2 on end # I2C #4
device pci 1c.0 on
chip drivers/intel/wifi
register "wake" = "GPE0_DW0_16"
@@ -201,7 +151,7 @@ chip soc/intel/skylake
device pci 1e.3 off end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
- device pci 1e.6 off end # SDCard
+ device pci 1e.6 off end # SDCard
device pci 1f.0 on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
@@ -212,14 +162,7 @@ chip soc/intel/skylake
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on
- chip drivers/generic/max98357a
- register "hid" = ""MX98357A""
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)"
- register "sdmode_delay" = "5"
- device generic 0 on end
- end
- end # Intel HDA
+ device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
diff --git a/src/mainboard/google/glados/variants/asuka/devicetree.cb b/src/mainboard/google/glados/variants/asuka/devicetree.cb
deleted file mode 100644
index 395b5728b7..0000000000
--- a/src/mainboard/google/glados/variants/asuka/devicetree.cb
+++ /dev/null
@@ -1,227 +0,0 @@
-chip soc/intel/skylake
-
- register "gpu_pp_up_delay_ms" = "200"
- register "gpu_pp_down_delay_ms" = " 50"
- register "gpu_pp_cycle_delay_ms" = "500"
- register "gpu_pp_backlight_on_delay_ms" = " 1"
- register "gpu_pp_backlight_off_delay_ms" = "200"
-
- register "gpu_pch_backlight_pwm_hz" = "1000"
-
- # Enable deep Sx states
- register "deep_s3_enable_ac" = "0"
- register "deep_s3_enable_dc" = "0"
- register "deep_s5_enable_ac" = "1"
- register "deep_s5_enable_dc" = "1"
- register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
-
- # GPE configuration
- # Note that GPE events called out in ASL code rely on this
- # route. i.e. If this route changes then the affected GPE
- # offset bits also need to be changed.
- register "gpe0_dw0" = "GPP_B"
- register "gpe0_dw1" = "GPP_D"
- register "gpe0_dw2" = "GPP_E"
-
- # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x000c0201"
-
- # Enable "Intel Speed Shift Technology"
- register "speed_shift_enable" = "1"
-
- # Enable DPTF
- register "dptf_enable" = "1"
-
- # FSP Configuration
- register "ProbelessTrace" = "0"
- register "EnableLan" = "0"
- register "EnableSata" = "0"
- register "SataSalpSupport" = "0"
- register "SataMode" = "0"
- register "SataPortsEnable[0]" = "0"
- register "EnableAzalia" = "1"
- register "DspEnable" = "1"
- register "IoBufferOwnership" = "3"
- register "EnableTraceHub" = "0"
- register "SsicPortEnable" = "0"
- register "SmbusEnable" = "1"
- register "Cio2Enable" = "0"
- register "ScsEmmcEnabled" = "1"
- register "ScsEmmcHs400Enabled" = "1"
- register "ScsSdCardEnabled" = "0"
- register "PttSwitch" = "0"
- register "SkipExtGfxScan" = "1"
- register "Device4Enable" = "1"
- register "HeciEnabled" = "0"
- register "SaGv" = "3"
- register "PmConfigSlpS3MinAssert" = "2" # 50ms
- register "PmConfigSlpS4MinAssert" = "4" # 4s
- register "PmConfigSlpSusMinAssert" = "3" # 4s
- register "PmConfigSlpAMinAssert" = "3" # 2s
- register "PmTimerDisabled" = "1"
-
- register "pirqa_routing" = "PCH_IRQ11"
- register "pirqb_routing" = "PCH_IRQ10"
- register "pirqc_routing" = "PCH_IRQ11"
- register "pirqd_routing" = "PCH_IRQ11"
- register "pirqe_routing" = "PCH_IRQ11"
- register "pirqf_routing" = "PCH_IRQ11"
- register "pirqg_routing" = "PCH_IRQ11"
- register "pirqh_routing" = "PCH_IRQ11"
-
- # Enable Root port 1
- register "PcieRpEnable[0]" = "1"
- # Enable CLKREQ#
- register "PcieRpClkReqSupport[0]" = "1"
- # RP 1 uses SRCCLKREQ1#
- register "PcieRpClkReqNumber[0]" = "1"
-
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
- register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # Card Reader
- register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (board)
- register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
- register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # PIC MCU
- register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
-
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card Reader
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (board)
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
-
- # Must leave UART0 enabled or SD/eMMC will not work as PCI
- register "SerialIoDevMode" = "{
- [PchSerialIoIndexI2C0] = PchSerialIoPci,
- [PchSerialIoIndexI2C1] = PchSerialIoPci,
- [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C4] = PchSerialIoPci,
- [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi0] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart0] = PchSerialIoPci,
- [PchSerialIoIndexUart1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart2] = PchSerialIoSkipInit,
- }"
-
- # I2C4 is 1.8V
- register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
-
- # PL2 override 25W
- register "tdp_pl2_override" = "25"
-
- # Send an extra VR mailbox command for the PS4 exit issue
- register "SendVrMbxCmd" = "2"
-
- # Lock Down
- register "common_soc_config" = "{
- .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
- }"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- device pci 00.0 on end # Host Bridge
- device pci 02.0 on end # Integrated Graphics Device
- device pci 14.0 on end # USB xHCI
- device pci 14.1 off end # USB xDCI (OTG)
- device pci 14.2 on end # Thermal Subsystem
- device pci 15.0 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0001""
- register "desc" = ""ELAN Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
- device i2c 10 on end
- end
- end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
- register "wake" = "GPE0_DW0_05"
- device i2c 15 on end
- end
- end # I2C #1
- device pci 15.2 off end # I2C #2
- device pci 15.3 off end # I2C #3
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT Redirection
- device pci 16.4 off end # Management Engine Interface 3
- device pci 17.0 off end # SATA
- device pci 19.0 on end # UART #2
- device pci 19.1 off end # I2C #5
- device pci 19.2 on
- chip drivers/i2c/nau8825
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
- register "jkdet_enable" = "1"
- register "jkdet_pull_enable" = "0" # R389
- register "jkdet_polarity" = "1" # ActiveLow
- register "vref_impedance" = "2" # 125kOhm
- register "micbias_voltage" = "6" # 2.754
- register "sar_threshold_num" = "4"
- register "sar_threshold[0]" = "0x08"
- register "sar_threshold[1]" = "0x12"
- register "sar_threshold[2]" = "0x26"
- register "sar_threshold[3]" = "0x73"
- register "sar_hysteresis" = "0"
- register "sar_voltage" = "6"
- register "sar_compare_time" = "1" # 1us
- register "sar_sampling_time" = "1" # 4us
- register "short_key_debounce" = "3" # 30ms
- register "jack_insert_debounce" = "7" # 512ms
- register "jack_eject_debounce" = "0"
- device i2c 1a on end
- end
- end # I2C #4
- device pci 1c.0 on
- chip drivers/intel/wifi
- register "wake" = "GPE0_DW0_16"
- device pci 00.0 on end
- end
- end # PCI Express Port 1
- device pci 1c.1 off end # PCI Express Port 2
- device pci 1c.2 off end # PCI Express Port 3
- device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 off end # PCI Express Port 5
- device pci 1c.5 off end # PCI Express Port 6
- device pci 1c.6 off end # PCI Express Port 7
- device pci 1c.7 off end # PCI Express Port 8
- device pci 1d.0 off end # PCI Express Port 9
- device pci 1d.1 off end # PCI Express Port 10
- device pci 1d.2 off end # PCI Express Port 11
- device pci 1d.3 off end # PCI Express Port 12
- device pci 1e.0 on end # UART #0
- device pci 1e.1 off end # UART #1
- device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1e.4 on end # eMMC
- device pci 1e.5 off end # SDIO
- device pci 1e.6 off end # SDCard
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Interface
- device pci 1f.1 on end # P2SB
- device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on
- chip drivers/generic/max98357a
- register "hid" = ""MX98357A""
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
- register "sdmode_delay" = "5"
- device generic 0 on end
- end
- end # Intel HDA
- device pci 1f.4 on end # SMBus
- device pci 1f.5 on end # PCH SPI
- device pci 1f.6 off end # GbE
- end
-end
diff --git a/src/mainboard/google/glados/variants/asuka/overridetree.cb b/src/mainboard/google/glados/variants/asuka/overridetree.cb
new file mode 100644
index 0000000000..4be1fc6ae3
--- /dev/null
+++ b/src/mainboard/google/glados/variants/asuka/overridetree.cb
@@ -0,0 +1,66 @@
+chip soc/intel/skylake
+
+ register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # Card Reader
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (board)
+ register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
+ register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # PIC MCU
+ register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card Reader
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (board)
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
+
+ device domain 0 on
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ device i2c 10 on end
+ end
+ end # I2C #0
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_05"
+ device i2c 15 on end
+ end
+ end # I2C #1
+ device pci 19.2 on
+ chip drivers/i2c/nau8825
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "jkdet_enable" = "1"
+ register "jkdet_pull_enable" = "0" # R389
+ register "jkdet_polarity" = "1" # ActiveLow
+ register "vref_impedance" = "2" # 125kOhm
+ register "micbias_voltage" = "6" # 2.754
+ register "sar_threshold_num" = "4"
+ register "sar_threshold[0]" = "0x08"
+ register "sar_threshold[1]" = "0x12"
+ register "sar_threshold[2]" = "0x26"
+ register "sar_threshold[3]" = "0x73"
+ register "sar_hysteresis" = "0"
+ register "sar_voltage" = "6"
+ register "sar_compare_time" = "1" # 1us
+ register "sar_sampling_time" = "1" # 4us
+ register "short_key_debounce" = "3" # 30ms
+ register "jack_insert_debounce" = "7" # 512ms
+ register "jack_eject_debounce" = "0"
+ device i2c 1a on end
+ end
+ end # I2C #4
+ device pci 1f.3 on
+ chip drivers/generic/max98357a
+ register "hid" = ""MX98357A""
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
+ register "sdmode_delay" = "5"
+ device generic 0 on end
+ end
+ end # Intel HDA
+ end
+end
diff --git a/src/mainboard/google/glados/variants/caroline/devicetree.cb b/src/mainboard/google/glados/variants/caroline/devicetree.cb
deleted file mode 100644
index 3e733d6b1c..0000000000
--- a/src/mainboard/google/glados/variants/caroline/devicetree.cb
+++ /dev/null
@@ -1,241 +0,0 @@
-chip soc/intel/skylake
-
- register "gpu_pp_up_delay_ms" = "200"
- register "gpu_pp_down_delay_ms" = " 50"
- register "gpu_pp_cycle_delay_ms" = "500"
- register "gpu_pp_backlight_on_delay_ms" = " 1"
- register "gpu_pp_backlight_off_delay_ms" = "200"
-
- register "gpu_pch_backlight_pwm_hz" = "1000"
-
- # Enable deep Sx states
- register "deep_s3_enable_ac" = "0"
- register "deep_s3_enable_dc" = "0"
- register "deep_s5_enable_ac" = "1"
- register "deep_s5_enable_dc" = "1"
- register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
-
- # GPE configuration
- # Note that GPE events called out in ASL code rely on this
- # route. i.e. If this route changes then the affected GPE
- # offset bits also need to be changed.
- register "gpe0_dw0" = "GPP_B"
- register "gpe0_dw1" = "GPP_D"
- register "gpe0_dw2" = "GPP_E"
-
- # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x000c0201"
-
- # Enable "Intel Speed Shift Technology"
- register "speed_shift_enable" = "1"
-
- # Enable DPTF
- register "dptf_enable" = "1"
-
- # FSP Configuration
- register "ProbelessTrace" = "0"
- register "EnableLan" = "0"
- register "EnableSata" = "0"
- register "SataSalpSupport" = "0"
- register "SataMode" = "0"
- register "SataPortsEnable[0]" = "0"
- register "EnableAzalia" = "1"
- register "DspEnable" = "1"
- register "IoBufferOwnership" = "3"
- register "EnableTraceHub" = "0"
- register "SsicPortEnable" = "0"
- register "SmbusEnable" = "1"
- register "Cio2Enable" = "0"
- register "ScsEmmcEnabled" = "1"
- register "ScsEmmcHs400Enabled" = "1"
- register "ScsSdCardEnabled" = "2"
- register "PttSwitch" = "0"
- register "SkipExtGfxScan" = "1"
- register "Device4Enable" = "1"
- register "HeciEnabled" = "0"
- register "SaGv" = "3"
- register "PmConfigSlpS3MinAssert" = "2" # 50ms
- register "PmConfigSlpS4MinAssert" = "1" # 1s
- register "PmConfigSlpSusMinAssert" = "1" # 500ms
- register "PmConfigSlpAMinAssert" = "3" # 2s
- register "PmTimerDisabled" = "1"
-
- register "pirqa_routing" = "PCH_IRQ11"
- register "pirqb_routing" = "PCH_IRQ10"
- register "pirqc_routing" = "PCH_IRQ11"
- register "pirqd_routing" = "PCH_IRQ11"
- register "pirqe_routing" = "PCH_IRQ11"
- register "pirqf_routing" = "PCH_IRQ11"
- register "pirqg_routing" = "PCH_IRQ11"
- register "pirqh_routing" = "PCH_IRQ11"
-
- # VR Slew rate setting for improving audible noise
- register "AcousticNoiseMitigation" = "1"
- register "SlowSlewRateForIa" = "3" # Fast/16
- register "SlowSlewRateForGt" = "3" # Fast/16
- register "SlowSlewRateForSa" = "0" # Fast/2
- register "FastPkgCRampDisable" = "0"
-
- # Enable Root port 1
- register "PcieRpEnable[0]" = "1"
- # Enable CLKREQ#
- register "PcieRpClkReqSupport[0]" = "1"
- # RP 1 uses SRCCLKREQ1#
- register "PcieRpClkReqNumber[0]" = "1"
-
- register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port (main)
- register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (sub)
- register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Empty
- register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
- register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Empty
-
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (main)
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (sub)
- register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty
- register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty
-
- # Must leave UART0 enabled or SD/eMMC will not work as PCI
- register "SerialIoDevMode" = "{
- [PchSerialIoIndexI2C0] = PchSerialIoPci,
- [PchSerialIoIndexI2C1] = PchSerialIoPci,
- [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C4] = PchSerialIoPci,
- [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi0] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart0] = PchSerialIoPci,
- [PchSerialIoIndexUart1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart2] = PchSerialIoSkipInit,
- }"
-
- # I2C4 is 1.8V
- register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
-
- # PL2 override 15W
- register "tdp_pl2_override" = "15"
-
- # Send an extra VR mailbox command for the supported MPS IMVP8 model
- register "SendVrMbxCmd" = "1"
-
- # TCC of 90C
- register "tcc_offset" = "10"
-
- # Lock Down
- register "common_soc_config" = "{
- .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
- }"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- device pci 00.0 on end # Host Bridge
- device pci 02.0 on end # Integrated Graphics Device
- device pci 14.0 on end # USB xHCI
- device pci 14.1 off end # USB xDCI (OTG)
- device pci 14.2 on end # Thermal Subsystem
- device pci 15.0 on
- chip drivers/i2c/generic
- register "hid" = ""ATML0001""
- register "desc" = ""Atmel Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
- device i2c 4b on end
- end
- end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ATML0000""
- register "desc" = ""Atmel Touchpad""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
- register "wake" = "GPE0_DW0_05"
- device i2c 4a on end
- end
- end # I2C #1
- device pci 15.2 off end # I2C #2
- device pci 15.3 off end # I2C #3
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT Redirection
- device pci 16.4 off end # Management Engine Interface 3
- device pci 17.0 off end # SATA
- device pci 19.0 on end # UART #2
- device pci 19.1 off end # I2C #5
- device pci 19.2 on
- chip drivers/i2c/nau8825
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
- register "jkdet_enable" = "1"
- register "jkdet_pull_enable" = "0" # R389
- register "jkdet_polarity" = "1" # ActiveLow
- register "vref_impedance" = "2" # 125kOhm
- register "micbias_voltage" = "6" # 2.754
- register "sar_threshold_num" = "4"
- register "sar_threshold[0]" = "0x0c"
- register "sar_threshold[1]" = "0x1c"
- register "sar_threshold[2]" = "0x38"
- register "sar_threshold[3]" = "0x60"
- register "sar_hysteresis" = "1"
- register "sar_voltage" = "0" # VDDA
- register "sar_compare_time" = "0" # 500ns
- register "sar_sampling_time" = "0" # 2us
- register "short_key_debounce" = "2" # 100ms
- register "jack_insert_debounce" = "4" # 64ms
- register "jack_eject_debounce" = "4" # 64ms
- device i2c 1a on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Left Speaker Amp""
- register "uid" = "0"
- device i2c 34 on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Right Speaker Amp""
- register "uid" = "1"
- device i2c 35 on end
- end
- end # I2C #4
- device pci 1c.0 on
- chip drivers/intel/wifi
- register "wake" = "GPE0_DW0_16"
- device pci 00.0 on end
- end
- end # PCI Express Port 1
- device pci 1c.1 off end # PCI Express Port 2
- device pci 1c.2 off end # PCI Express Port 3
- device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 off end # PCI Express Port 5
- device pci 1c.5 off end # PCI Express Port 6
- device pci 1c.6 off end # PCI Express Port 7
- device pci 1c.7 off end # PCI Express Port 8
- device pci 1d.0 off end # PCI Express Port 9
- device pci 1d.1 off end # PCI Express Port 10
- device pci 1d.2 off end # PCI Express Port 11
- device pci 1d.3 off end # PCI Express Port 12
- device pci 1e.0 on end # UART #0
- device pci 1e.1 off end # UART #1
- device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1e.4 on end # eMMC
- device pci 1e.5 off end # SDIO
- device pci 1e.6 on end # SDCard
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Interface
- device pci 1f.1 on end # P2SB
- device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on end # Intel HDA
- device pci 1f.4 on end # SMBus
- device pci 1f.5 on end # PCH SPI
- device pci 1f.6 off end # GbE
- end
-end
diff --git a/src/mainboard/google/glados/variants/caroline/overridetree.cb b/src/mainboard/google/glados/variants/caroline/overridetree.cb
new file mode 100644
index 0000000000..ce364801ca
--- /dev/null
+++ b/src/mainboard/google/glados/variants/caroline/overridetree.cb
@@ -0,0 +1,91 @@
+chip soc/intel/skylake
+
+ register "ScsSdCardEnabled" = "2"
+
+ register "PmConfigSlpS4MinAssert" = "1" # 1s
+ register "PmConfigSlpSusMinAssert" = "1" # 500ms
+
+ # VR Slew rate setting for improving audible noise
+ register "AcousticNoiseMitigation" = "1"
+ register "SlowSlewRateForIa" = "3" # Fast/16
+ register "SlowSlewRateForGt" = "3" # Fast/16
+ register "SlowSlewRateForSa" = "0" # Fast/2
+ register "FastPkgCRampDisable" = "0"
+
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port (main)
+ register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (sub)
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Empty
+ register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
+ register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Empty
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (main)
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (sub)
+ register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty
+ register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty
+
+ # PL2 override 15W
+ register "tdp_pl2_override" = "15"
+
+ # Send an extra VR mailbox command for the supported MPS IMVP8 model
+ register "SendVrMbxCmd" = "1"
+
+ # TCC of 90C
+ register "tcc_offset" = "10"
+
+ device domain 0 on
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ATML0001""
+ register "desc" = ""Atmel Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ device i2c 4b on end
+ end
+ end # I2C #0
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ATML0000""
+ register "desc" = ""Atmel Touchpad""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_05"
+ device i2c 4a on end
+ end
+ end # I2C #1
+ device pci 19.2 on
+ chip drivers/i2c/nau8825
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "jkdet_enable" = "1"
+ register "jkdet_pull_enable" = "0" # R389
+ register "jkdet_polarity" = "1" # ActiveLow
+ register "vref_impedance" = "2" # 125kOhm
+ register "micbias_voltage" = "6" # 2.754
+ register "sar_threshold_num" = "4"
+ register "sar_threshold[0]" = "0x0c"
+ register "sar_threshold[1]" = "0x1c"
+ register "sar_threshold[2]" = "0x38"
+ register "sar_threshold[3]" = "0x60"
+ register "sar_hysteresis" = "1"
+ register "sar_voltage" = "0" # VDDA
+ register "sar_compare_time" = "0" # 500ns
+ register "sar_sampling_time" = "0" # 2us
+ register "short_key_debounce" = "2" # 100ms
+ register "jack_insert_debounce" = "4" # 64ms
+ register "jack_eject_debounce" = "4" # 64ms
+ device i2c 1a on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""INT343B""
+ register "desc" = ""SSM4567 Left Speaker Amp""
+ register "uid" = "0"
+ device i2c 34 on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""INT343B""
+ register "desc" = ""SSM4567 Right Speaker Amp""
+ register "uid" = "1"
+ device i2c 35 on end
+ end
+ end # I2C #4
+ device pci 1e.6 on end # SDCard
+ end
+end
diff --git a/src/mainboard/google/glados/variants/cave/devicetree.cb b/src/mainboard/google/glados/variants/cave/devicetree.cb
deleted file mode 100644
index ccc2302a58..0000000000
--- a/src/mainboard/google/glados/variants/cave/devicetree.cb
+++ /dev/null
@@ -1,232 +0,0 @@
-chip soc/intel/skylake
-
- register "gpu_pp_up_delay_ms" = "200"
- register "gpu_pp_down_delay_ms" = " 50"
- register "gpu_pp_cycle_delay_ms" = "500"
- register "gpu_pp_backlight_on_delay_ms" = " 1"
- register "gpu_pp_backlight_off_delay_ms" = "200"
-
- register "gpu_pch_backlight_pwm_hz" = "1000"
-
- # Enable deep Sx states
- register "deep_s3_enable_ac" = "0"
- register "deep_s3_enable_dc" = "0"
- register "deep_s5_enable_ac" = "1"
- register "deep_s5_enable_dc" = "1"
- register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
-
- # GPE configuration
- # Note that GPE events called out in ASL code rely on this
- # route. i.e. If this route changes then the affected GPE
- # offset bits also need to be changed.
- register "gpe0_dw0" = "GPP_B"
- register "gpe0_dw1" = "GPP_D"
- register "gpe0_dw2" = "GPP_E"
-
- # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x000c0201"
-
- # Enable "Intel Speed Shift Technology"
- register "speed_shift_enable" = "1"
-
- # Enable DPTF
- register "dptf_enable" = "1"
-
- # FSP Configuration
- register "ProbelessTrace" = "0"
- register "EnableLan" = "0"
- register "EnableSata" = "0"
- register "SataSalpSupport" = "0"
- register "SataMode" = "0"
- register "SataPortsEnable[0]" = "0"
- register "EnableAzalia" = "1"
- register "DspEnable" = "1"
- register "IoBufferOwnership" = "3"
- register "EnableTraceHub" = "0"
- register "SsicPortEnable" = "0"
- register "SmbusEnable" = "1"
- register "Cio2Enable" = "0"
- register "ScsEmmcEnabled" = "1"
- register "ScsEmmcHs400Enabled" = "1"
- register "ScsSdCardEnabled" = "2"
- register "PttSwitch" = "0"
- register "SkipExtGfxScan" = "1"
- register "Device4Enable" = "1"
- register "HeciEnabled" = "0"
- register "SaGv" = "3"
- register "PmConfigSlpS3MinAssert" = "2" # 50ms
- register "PmConfigSlpS4MinAssert" = "1" # 1s
- register "PmConfigSlpSusMinAssert" = "1" # 500ms
- register "PmConfigSlpAMinAssert" = "3" # 2s
- register "PmTimerDisabled" = "1"
-
- register "pirqa_routing" = "PCH_IRQ11"
- register "pirqb_routing" = "PCH_IRQ10"
- register "pirqc_routing" = "PCH_IRQ11"
- register "pirqd_routing" = "PCH_IRQ11"
- register "pirqe_routing" = "PCH_IRQ11"
- register "pirqf_routing" = "PCH_IRQ11"
- register "pirqg_routing" = "PCH_IRQ11"
- register "pirqh_routing" = "PCH_IRQ11"
-
- # Enable Root port 1
- register "PcieRpEnable[0]" = "1"
- # Enable CLKREQ#
- register "PcieRpClkReqSupport[0]" = "1"
- # RP 1 uses SRCCLKREQ1#
- register "PcieRpClkReqNumber[0]" = "1"
-
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port (board)
- register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (flex)
- register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Type-A Port 1
- register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
- register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A Port 2
-
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (board)
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (flex)
- register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A Port 1
- register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A Port 2
-
- # Must leave UART0 enabled or SD/eMMC will not work as PCI
- register "SerialIoDevMode" = "{
- [PchSerialIoIndexI2C0] = PchSerialIoPci,
- [PchSerialIoIndexI2C1] = PchSerialIoPci,
- [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C4] = PchSerialIoPci,
- [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi0] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart0] = PchSerialIoPci,
- [PchSerialIoIndexUart1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart2] = PchSerialIoSkipInit,
- }"
-
- # I2C4 is 1.8V
- register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
-
- # PL2 override 15W
- register "tdp_pl2_override" = "15"
-
- # Send an extra VR mailbox command for the supported MPS IMVP8 model
- register "SendVrMbxCmd" = "1"
-
- # TCC of 90C
- register "tcc_offset" = "10"
-
- # Use default SD card detect GPIO configuration
- register "sdcard_cd_gpio_default" = "GPP_A7"
-
- # Lock Down
- register "common_soc_config" = "{
- .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
- }"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- device pci 00.0 on end # Host Bridge
- device pci 02.0 on end # Integrated Graphics Device
- device pci 14.0 on end # USB xHCI
- device pci 14.1 off end # USB xDCI (OTG)
- device pci 14.2 on end # Thermal Subsystem
- device pci 15.0 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0001""
- register "desc" = ""ELAN Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
- device i2c 10 on end
- end
- end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
- register "wake" = "GPE0_DW0_05"
- device i2c 15 on end
- end
- end # I2C #1
- device pci 15.2 off end # I2C #2
- device pci 15.3 off end # I2C #3
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT Redirection
- device pci 16.4 off end # Management Engine Interface 3
- device pci 17.0 off end # SATA
- device pci 19.0 on end # UART #2
- device pci 19.1 off end # I2C #5
- device pci 19.2 on
- chip drivers/i2c/nau8825
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
- register "jkdet_enable" = "1"
- register "jkdet_pull_enable" = "0" # R389
- register "jkdet_polarity" = "1" # ActiveLow
- register "vref_impedance" = "2" # 125kOhm
- register "micbias_voltage" = "6" # 2.754
- register "sar_threshold_num" = "4"
- register "sar_threshold[0]" = "0x0c"
- register "sar_threshold[1]" = "0x1e"
- register "sar_threshold[2]" = "0x38"
- register "sar_threshold[3]" = "0x60"
- register "sar_hysteresis" = "1"
- register "sar_voltage" = "0" # VDDA
- register "sar_compare_time" = "0" # 500ns
- register "sar_sampling_time" = "0" # 2us
- register "short_key_debounce" = "2" # 100ms
- register "jack_insert_debounce" = "7" # 512ms
- register "jack_eject_debounce" = "7" # 512ms
- device i2c 1a on end
- end
- end # I2C #4
- device pci 1c.0 on
- chip drivers/intel/wifi
- register "wake" = "GPE0_DW0_16"
- device pci 00.0 on end
- end
- end # PCI Express Port 1
- device pci 1c.1 off end # PCI Express Port 2
- device pci 1c.2 off end # PCI Express Port 3
- device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 off end # PCI Express Port 5
- device pci 1c.5 off end # PCI Express Port 6
- device pci 1c.6 off end # PCI Express Port 7
- device pci 1c.7 off end # PCI Express Port 8
- device pci 1d.0 off end # PCI Express Port 9
- device pci 1d.1 off end # PCI Express Port 10
- device pci 1d.2 off end # PCI Express Port 11
- device pci 1d.3 off end # PCI Express Port 12
- device pci 1e.0 on end # UART #0
- device pci 1e.1 off end # UART #1
- device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1e.4 on end # eMMC
- device pci 1e.5 off end # SDIO
- device pci 1e.6 on end # SDCard
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Interface
- device pci 1f.1 on end # P2SB
- device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on
- chip drivers/generic/max98357a
- register "hid" = ""MX98357A""
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
- register "sdmode_delay" = "5"
- device generic 0 on end
- end
- end # Intel HDA
- device pci 1f.4 on end # SMBus
- device pci 1f.5 on end # PCH SPI
- device pci 1f.6 off end # GbE
- end
-end
diff --git a/src/mainboard/google/glados/variants/cave/overridetree.cb b/src/mainboard/google/glados/variants/cave/overridetree.cb
new file mode 100644
index 0000000000..ae32b3dabf
--- /dev/null
+++ b/src/mainboard/google/glados/variants/cave/overridetree.cb
@@ -0,0 +1,83 @@
+chip soc/intel/skylake
+
+ register "ScsSdCardEnabled" = "2"
+
+ register "PmConfigSlpS4MinAssert" = "1" # 1s
+ register "PmConfigSlpSusMinAssert" = "1" # 500ms
+
+ register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port (board)
+ register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (flex)
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Type-A Port 1
+ register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
+ register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A Port 2
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (board)
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (flex)
+ register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A Port 1
+ register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A Port 2
+
+ # PL2 override 15W
+ register "tdp_pl2_override" = "15"
+
+ # Send an extra VR mailbox command for the supported MPS IMVP8 model
+ register "SendVrMbxCmd" = "1"
+
+ # TCC of 90C
+ register "tcc_offset" = "10"
+
+ # Use default SD card detect GPIO configuration
+ register "sdcard_cd_gpio_default" = "GPP_A7"
+
+ device domain 0 on
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ device i2c 10 on end
+ end
+ end # I2C #0
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_05"
+ device i2c 15 on end
+ end
+ end # I2C #1
+ device pci 19.2 on
+ chip drivers/i2c/nau8825
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "jkdet_enable" = "1"
+ register "jkdet_pull_enable" = "0" # R389
+ register "jkdet_polarity" = "1" # ActiveLow
+ register "vref_impedance" = "2" # 125kOhm
+ register "micbias_voltage" = "6" # 2.754
+ register "sar_threshold_num" = "4"
+ register "sar_threshold[0]" = "0x0c"
+ register "sar_threshold[1]" = "0x1e"
+ register "sar_threshold[2]" = "0x38"
+ register "sar_threshold[3]" = "0x60"
+ register "sar_hysteresis" = "1"
+ register "sar_voltage" = "0" # VDDA
+ register "sar_compare_time" = "0" # 500ns
+ register "sar_sampling_time" = "0" # 2us
+ register "short_key_debounce" = "2" # 100ms
+ register "jack_insert_debounce" = "7" # 512ms
+ register "jack_eject_debounce" = "7" # 512ms
+ device i2c 1a on end
+ end
+ end # I2C #4
+ device pci 1e.6 on end # SDCard
+ device pci 1f.3 on
+ chip drivers/generic/max98357a
+ register "hid" = ""MX98357A""
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
+ register "sdmode_delay" = "5"
+ device generic 0 on end
+ end
+ end # Intel HDA
+ end
+end
diff --git a/src/mainboard/google/glados/variants/chell/devicetree.cb b/src/mainboard/google/glados/variants/chell/devicetree.cb
deleted file mode 100644
index bbc74f8d97..0000000000
--- a/src/mainboard/google/glados/variants/chell/devicetree.cb
+++ /dev/null
@@ -1,228 +0,0 @@
-chip soc/intel/skylake
-
- register "gpu_pp_up_delay_ms" = "200"
- register "gpu_pp_down_delay_ms" = " 50"
- register "gpu_pp_cycle_delay_ms" = "500"
- register "gpu_pp_backlight_on_delay_ms" = " 1"
- register "gpu_pp_backlight_off_delay_ms" = "200"
-
- register "gpu_pch_backlight_pwm_hz" = "1000"
-
- # Enable deep Sx states
- register "deep_s3_enable_ac" = "0"
- register "deep_s3_enable_dc" = "0"
- register "deep_s5_enable_ac" = "1"
- register "deep_s5_enable_dc" = "1"
- register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
-
- # GPE configuration
- # Note that GPE events called out in ASL code rely on this
- # route. i.e. If this route changes then the affected GPE
- # offset bits also need to be changed.
- register "gpe0_dw0" = "GPP_B"
- register "gpe0_dw1" = "GPP_D"
- register "gpe0_dw2" = "GPP_E"
-
- # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x000c0201"
-
- # Enable "Intel Speed Shift Technology"
- register "speed_shift_enable" = "1"
-
- # Enable DPTF
- register "dptf_enable" = "1"
-
- # FSP Configuration
- register "ProbelessTrace" = "0"
- register "EnableLan" = "0"
- register "EnableSata" = "0"
- register "SataSalpSupport" = "0"
- register "SataMode" = "0"
- register "SataPortsEnable[0]" = "0"
- register "EnableAzalia" = "1"
- register "DspEnable" = "1"
- register "IoBufferOwnership" = "3"
- register "EnableTraceHub" = "0"
- register "SsicPortEnable" = "0"
- register "SmbusEnable" = "1"
- register "Cio2Enable" = "0"
- register "ScsEmmcEnabled" = "1"
- register "ScsEmmcHs400Enabled" = "1"
- register "ScsSdCardEnabled" = "0"
- register "PttSwitch" = "0"
- register "SkipExtGfxScan" = "1"
- register "Device4Enable" = "1"
- register "HeciEnabled" = "0"
- register "SaGv" = "3"
- register "PmConfigSlpS3MinAssert" = "2" # 50ms
- register "PmConfigSlpS4MinAssert" = "1" # 1s
- register "PmConfigSlpSusMinAssert" = "1" # 500ms
- register "PmConfigSlpAMinAssert" = "3" # 2s
- register "PmTimerDisabled" = "1"
-
- register "pirqa_routing" = "PCH_IRQ11"
- register "pirqb_routing" = "PCH_IRQ10"
- register "pirqc_routing" = "PCH_IRQ11"
- register "pirqd_routing" = "PCH_IRQ11"
- register "pirqe_routing" = "PCH_IRQ11"
- register "pirqf_routing" = "PCH_IRQ11"
- register "pirqg_routing" = "PCH_IRQ11"
- register "pirqh_routing" = "PCH_IRQ11"
-
- # Enable Root port 1
- register "PcieRpEnable[0]" = "1"
- # Enable CLKREQ#
- register "PcieRpClkReqSupport[0]" = "1"
- # RP 1 uses SRCCLKREQ1#
- register "PcieRpClkReqNumber[0]" = "1"
-
- register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1
- register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2
- register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port
- register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
- register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD
-
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
-
-
- # Must leave UART0 enabled or SD/eMMC will not work as PCI
- register "SerialIoDevMode" = "{
- [PchSerialIoIndexI2C0] = PchSerialIoPci,
- [PchSerialIoIndexI2C1] = PchSerialIoPci,
- [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C4] = PchSerialIoPci,
- [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi0] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart0] = PchSerialIoPci,
- [PchSerialIoIndexUart1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart2] = PchSerialIoSkipInit,
- }"
-
- # I2C4 is 1.8V
- register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
-
- # PL2 override 15W
- register "tdp_pl2_override" = "15"
-
- # Send an extra VR mailbox command for the supported MPS IMVP8 model
- register "SendVrMbxCmd" = "1"
-
- # TCC of 90C
- register "tcc_offset" = "10"
-
- # Lock Down
- register "common_soc_config" = "{
- .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
- }"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- device pci 00.0 on end # Host Bridge
- device pci 02.0 on end # Integrated Graphics Device
- device pci 14.0 on end # USB xHCI
- device pci 14.1 off end # USB xDCI (OTG)
- device pci 14.2 on end # Thermal Subsystem
- device pci 15.0 on end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
- register "wake" = "GPE0_DW0_05"
- device i2c 15 on end
- end
- end # I2C #1
- device pci 15.2 off end # I2C #2
- device pci 15.3 off end # I2C #3
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT Redirection
- device pci 16.4 off end # Management Engine Interface 3
- device pci 17.0 off end # SATA
- device pci 19.0 on end # UART #2
- device pci 19.1 off end # I2C #5
- device pci 19.2 on
- chip drivers/i2c/nau8825
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
- register "jkdet_enable" = "1"
- register "jkdet_pull_enable" = "0" # R389
- register "jkdet_polarity" = "1" # ActiveLow
- register "vref_impedance" = "2" # 125kOhm
- register "micbias_voltage" = "6" # 2.754
- register "sar_threshold_num" = "4"
- register "sar_threshold[0]" = "0x0c"
- register "sar_threshold[1]" = "0x1c"
- register "sar_threshold[2]" = "0x38"
- register "sar_threshold[3]" = "0x60"
- register "sar_hysteresis" = "1"
- register "sar_voltage" = "0" # VDDA
- register "sar_compare_time" = "0" # 500ns
- register "sar_sampling_time" = "0" # 2us
- register "short_key_debounce" = "2" # 100ms
- register "jack_insert_debounce" = "7" # 512ms
- register "jack_eject_debounce" = "7" # 512ms
- device i2c 1a on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Left Speaker Amp""
- register "uid" = "0"
- device i2c 34 on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Right Speaker Amp""
- register "uid" = "1"
- device i2c 35 on end
- end
- end # I2C #4
- device pci 1c.0 on
- chip drivers/intel/wifi
- register "wake" = "GPE0_DW0_16"
- device pci 00.0 on end
- end
- end # PCI Express Port 1
- device pci 1c.1 off end # PCI Express Port 2
- device pci 1c.2 off end # PCI Express Port 3
- device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 off end # PCI Express Port 5
- device pci 1c.5 off end # PCI Express Port 6
- device pci 1c.6 off end # PCI Express Port 7
- device pci 1c.7 off end # PCI Express Port 8
- device pci 1d.0 off end # PCI Express Port 9
- device pci 1d.1 off end # PCI Express Port 10
- device pci 1d.2 off end # PCI Express Port 11
- device pci 1d.3 off end # PCI Express Port 12
- device pci 1e.0 on end # UART #0
- device pci 1e.1 off end # UART #1
- device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1e.4 on end # eMMC
- device pci 1e.5 off end # SDIO
- device pci 1e.6 off end # SDCard
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Interface
- device pci 1f.1 on end # P2SB
- device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on end # Intel HDA
- device pci 1f.4 on end # SMBus
- device pci 1f.5 on end # PCH SPI
- device pci 1f.6 off end # GbE
- end
-end
diff --git a/src/mainboard/google/glados/variants/chell/overridetree.cb b/src/mainboard/google/glados/variants/chell/overridetree.cb
new file mode 100644
index 0000000000..c6ccd208aa
--- /dev/null
+++ b/src/mainboard/google/glados/variants/chell/overridetree.cb
@@ -0,0 +1,73 @@
+chip soc/intel/skylake
+
+ register "PmConfigSlpS4MinAssert" = "1" # 1s
+ register "PmConfigSlpSusMinAssert" = "1" # 500ms
+
+ register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1
+ register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-C Port 2
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port
+ register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
+ register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # SD
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port 2
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
+
+ # PL2 override 15W
+ register "tdp_pl2_override" = "15"
+
+ # Send an extra VR mailbox command for the supported MPS IMVP8 model
+ register "SendVrMbxCmd" = "1"
+
+ # TCC of 90C
+ register "tcc_offset" = "10"
+
+ device domain 0 on
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_05"
+ device i2c 15 on end
+ end
+ end # I2C #1
+ device pci 19.2 on
+ chip drivers/i2c/nau8825
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "jkdet_enable" = "1"
+ register "jkdet_pull_enable" = "0" # R389
+ register "jkdet_polarity" = "1" # ActiveLow
+ register "vref_impedance" = "2" # 125kOhm
+ register "micbias_voltage" = "6" # 2.754
+ register "sar_threshold_num" = "4"
+ register "sar_threshold[0]" = "0x0c"
+ register "sar_threshold[1]" = "0x1c"
+ register "sar_threshold[2]" = "0x38"
+ register "sar_threshold[3]" = "0x60"
+ register "sar_hysteresis" = "1"
+ register "sar_voltage" = "0" # VDDA
+ register "sar_compare_time" = "0" # 500ns
+ register "sar_sampling_time" = "0" # 2us
+ register "short_key_debounce" = "2" # 100ms
+ register "jack_insert_debounce" = "7" # 512ms
+ register "jack_eject_debounce" = "7" # 512ms
+ device i2c 1a on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""INT343B""
+ register "desc" = ""SSM4567 Left Speaker Amp""
+ register "uid" = "0"
+ device i2c 34 on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""INT343B""
+ register "desc" = ""SSM4567 Right Speaker Amp""
+ register "uid" = "1"
+ device i2c 35 on end
+ end
+ end # I2C #4
+ end
+end
diff --git a/src/mainboard/google/glados/variants/glados/devicetree.cb b/src/mainboard/google/glados/variants/glados/devicetree.cb
deleted file mode 100644
index 9cd5ac986f..0000000000
--- a/src/mainboard/google/glados/variants/glados/devicetree.cb
+++ /dev/null
@@ -1,234 +0,0 @@
-chip soc/intel/skylake
-
- register "gpu_pp_up_delay_ms" = "200"
- register "gpu_pp_down_delay_ms" = " 50"
- register "gpu_pp_cycle_delay_ms" = "500"
- register "gpu_pp_backlight_on_delay_ms" = " 1"
- register "gpu_pp_backlight_off_delay_ms" = "200"
-
- register "gpu_pch_backlight_pwm_hz" = "1000"
-
- # Enable deep Sx states
- register "deep_s3_enable_ac" = "0"
- register "deep_s3_enable_dc" = "0"
- register "deep_s5_enable_ac" = "1"
- register "deep_s5_enable_dc" = "1"
- register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
-
- # GPE configuration
- # Note that GPE events called out in ASL code rely on this
- # route. i.e. If this route changes then the affected GPE
- # offset bits also need to be changed.
- register "gpe0_dw0" = "GPP_B"
- register "gpe0_dw1" = "GPP_D"
- register "gpe0_dw2" = "GPP_E"
-
- # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x000c0201"
-
- # Enable "Intel Speed Shift Technology"
- register "speed_shift_enable" = "1"
-
- # Enable DPTF
- register "dptf_enable" = "1"
-
- # FSP Configuration
- register "ProbelessTrace" = "0"
- register "EnableLan" = "0"
- register "EnableSata" = "0"
- register "SataSalpSupport" = "0"
- register "SataMode" = "0"
- register "SataPortsEnable[0]" = "0"
- register "EnableAzalia" = "1"
- register "DspEnable" = "1"
- register "IoBufferOwnership" = "3"
- register "EnableTraceHub" = "0"
- register "SsicPortEnable" = "0"
- register "SmbusEnable" = "1"
- register "Cio2Enable" = "0"
- register "ScsEmmcEnabled" = "1"
- register "ScsEmmcHs400Enabled" = "1"
- register "ScsSdCardEnabled" = "2"
- register "PttSwitch" = "0"
- register "SkipExtGfxScan" = "1"
- register "Device4Enable" = "1"
- register "HeciEnabled" = "0"
- register "SaGv" = "3"
- register "PmConfigSlpS3MinAssert" = "2" # 50ms
- register "PmConfigSlpS4MinAssert" = "1" # 1s
- register "PmConfigSlpSusMinAssert" = "1" # 500ms
- register "PmConfigSlpAMinAssert" = "3" # 2s
- register "PmTimerDisabled" = "1"
-
- register "pirqa_routing" = "PCH_IRQ11"
- register "pirqb_routing" = "PCH_IRQ10"
- register "pirqc_routing" = "PCH_IRQ11"
- register "pirqd_routing" = "PCH_IRQ11"
- register "pirqe_routing" = "PCH_IRQ11"
- register "pirqf_routing" = "PCH_IRQ11"
- register "pirqg_routing" = "PCH_IRQ11"
- register "pirqh_routing" = "PCH_IRQ11"
-
- # Enable Root port 1
- register "PcieRpEnable[0]" = "1"
- # Enable CLKREQ#
- register "PcieRpClkReqSupport[0]" = "1"
- # RP 1 uses SRCCLKREQ1#
- register "PcieRpClkReqNumber[0]" = "1"
-
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port (board)
- register "usb2_ports[1]" = "USB2_PORT_MAX(OC3)" # Type-C Port (flex)
- register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port 1
- register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
- register "usb2_ports[8]" = "USB2_PORT_MID(OC1)" # Type-A Port 2
-
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port (board)
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port (flex)
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 1
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 2
-
- # Must leave UART0 enabled or SD/eMMC will not work as PCI
- register "SerialIoDevMode" = "{
- [PchSerialIoIndexI2C0] = PchSerialIoPci,
- [PchSerialIoIndexI2C1] = PchSerialIoPci,
- [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C4] = PchSerialIoPci,
- [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi0] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart0] = PchSerialIoPci,
- [PchSerialIoIndexUart1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart2] = PchSerialIoSkipInit,
- }"
-
- # I2C4 is 1.8V
- register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
-
- # PL2 override 15W
- register "tdp_pl2_override" = "15"
-
- # Send an extra VR mailbox command for the supported MPS IMVP8 model
- register "SendVrMbxCmd" = "1"
-
- # TCC of 90C
- register "tcc_offset" = "10"
-
- # Lock Down
- register "common_soc_config" = "{
- .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
- }"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- device pci 00.0 on end # Host Bridge
- device pci 02.0 on end # Integrated Graphics Device
- device pci 14.0 on end # USB xHCI
- device pci 14.1 off end # USB xDCI (OTG)
- device pci 14.2 on end # Thermal Subsystem
- device pci 15.0 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0001""
- register "desc" = ""ELAN Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
- device i2c 10 on end
- end
- end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
- register "wake" = "GPE0_DW0_05"
- device i2c 15 on end
- end
- end # I2C #1
- device pci 15.2 off end # I2C #2
- device pci 15.3 off end # I2C #3
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT Redirection
- device pci 16.4 off end # Management Engine Interface 3
- device pci 17.0 off end # SATA
- device pci 19.0 on end # UART #2
- device pci 19.1 off end # I2C #5
- device pci 19.2 on
- chip drivers/i2c/nau8825
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
- register "jkdet_enable" = "1"
- register "jkdet_pull_enable" = "0" # R389
- register "jkdet_polarity" = "1" # ActiveLow
- register "vref_impedance" = "2" # 125kOhm
- register "micbias_voltage" = "6" # 2.754
- register "sar_threshold_num" = "4"
- register "sar_threshold[0]" = "0x0c"
- register "sar_threshold[1]" = "0x1e"
- register "sar_threshold[2]" = "0x38"
- register "sar_threshold[3]" = "0x60"
- register "sar_hysteresis" = "1"
- register "sar_voltage" = "0" # VDDA
- register "sar_compare_time" = "0" # 500ns
- register "sar_sampling_time" = "0" # 2us
- register "short_key_debounce" = "2" # 100ms
- register "jack_insert_debounce" = "7" # 512ms
- register "jack_eject_debounce" = "7" # 512ms
- device i2c 1a on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Left Speaker Amp""
- register "uid" = "0"
- device i2c 34 on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Right Speaker Amp""
- register "uid" = "1"
- device i2c 35 on end
- end
- end # I2C #4
- device pci 1c.0 on
- chip drivers/intel/wifi
- register "wake" = "GPE0_DW0_16"
- device pci 00.0 on end
- end
- end # PCI Express Port 1
- device pci 1c.1 off end # PCI Express Port 2
- device pci 1c.2 off end # PCI Express Port 3
- device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 off end # PCI Express Port 5
- device pci 1c.5 off end # PCI Express Port 6
- device pci 1c.6 off end # PCI Express Port 7
- device pci 1c.7 off end # PCI Express Port 8
- device pci 1d.0 off end # PCI Express Port 9
- device pci 1d.1 off end # PCI Express Port 10
- device pci 1d.2 off end # PCI Express Port 11
- device pci 1d.3 off end # PCI Express Port 12
- device pci 1e.0 on end # UART #0
- device pci 1e.1 off end # UART #1
- device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1e.4 on end # eMMC
- device pci 1e.5 off end # SDIO
- device pci 1e.6 on end # SDCard
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Interface
- device pci 1f.1 on end # P2SB
- device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on end # Intel HDA
- device pci 1f.4 on end # SMBus
- device pci 1f.5 on end # PCH SPI
- device pci 1f.6 off end # GbE
- end
-end
diff --git a/src/mainboard/google/glados/variants/glados/overridetree.cb b/src/mainboard/google/glados/variants/glados/overridetree.cb
new file mode 100644
index 0000000000..1bc69abb17
--- /dev/null
+++ b/src/mainboard/google/glados/variants/glados/overridetree.cb
@@ -0,0 +1,84 @@
+chip soc/intel/skylake
+
+ register "ScsSdCardEnabled" = "2"
+
+ register "PmConfigSlpS4MinAssert" = "1" # 1s
+ register "PmConfigSlpSusMinAssert" = "1" # 500ms
+
+ register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port (board)
+ register "usb2_ports[1]" = "USB2_PORT_MAX(OC3)" # Type-C Port (flex)
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port 1
+ register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
+ register "usb2_ports[8]" = "USB2_PORT_MID(OC1)" # Type-A Port 2
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port (board)
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-C Port (flex)
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 1
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 2
+
+ # PL2 override 15W
+ register "tdp_pl2_override" = "15"
+
+ # Send an extra VR mailbox command for the supported MPS IMVP8 model
+ register "SendVrMbxCmd" = "1"
+
+ # TCC of 90C
+ register "tcc_offset" = "10"
+
+ device domain 0 on
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ device i2c 10 on end
+ end
+ end # I2C #0
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_05"
+ device i2c 15 on end
+ end
+ end # I2C #1
+ device pci 19.2 on
+ chip drivers/i2c/nau8825
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "jkdet_enable" = "1"
+ register "jkdet_pull_enable" = "0" # R389
+ register "jkdet_polarity" = "1" # ActiveLow
+ register "vref_impedance" = "2" # 125kOhm
+ register "micbias_voltage" = "6" # 2.754
+ register "sar_threshold_num" = "4"
+ register "sar_threshold[0]" = "0x0c"
+ register "sar_threshold[1]" = "0x1e"
+ register "sar_threshold[2]" = "0x38"
+ register "sar_threshold[3]" = "0x60"
+ register "sar_hysteresis" = "1"
+ register "sar_voltage" = "0" # VDDA
+ register "sar_compare_time" = "0" # 500ns
+ register "sar_sampling_time" = "0" # 2us
+ register "short_key_debounce" = "2" # 100ms
+ register "jack_insert_debounce" = "7" # 512ms
+ register "jack_eject_debounce" = "7" # 512ms
+ device i2c 1a on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""INT343B""
+ register "desc" = ""SSM4567 Left Speaker Amp""
+ register "uid" = "0"
+ device i2c 34 on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""INT343B""
+ register "desc" = ""SSM4567 Right Speaker Amp""
+ register "uid" = "1"
+ device i2c 35 on end
+ end
+ end # I2C #4
+ device pci 1e.6 on end # SDCard
+ end
+end
diff --git a/src/mainboard/google/glados/variants/lars/overridetree.cb b/src/mainboard/google/glados/variants/lars/overridetree.cb
new file mode 100644
index 0000000000..ce32b6b0c9
--- /dev/null
+++ b/src/mainboard/google/glados/variants/lars/overridetree.cb
@@ -0,0 +1,67 @@
+chip soc/intel/skylake
+
+ register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
+ register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # SD
+ register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
+
+ device domain 0 on
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ device i2c 10 on end
+ end
+ end # I2C #0
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_05"
+ device i2c 15 on end
+ end
+ end # I2C #1
+ device pci 19.2 on
+ chip drivers/i2c/nau8825
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "jkdet_enable" = "1"
+ register "jkdet_pull_enable" = "1"
+ register "jkdet_pull_up" = "1"
+ register "jkdet_polarity" = "1" # ActiveLow
+ register "vref_impedance" = "2" # 125kOhm
+ register "micbias_voltage" = "6" # 2.754
+ register "sar_threshold_num" = "4"
+ register "sar_threshold[0]" = "0x08"
+ register "sar_threshold[1]" = "0x12"
+ register "sar_threshold[2]" = "0x26"
+ register "sar_threshold[3]" = "0x73"
+ register "sar_hysteresis" = "0"
+ register "sar_voltage" = "6"
+ register "sar_compare_time" = "1" # 1us
+ register "sar_sampling_time" = "1" # 4us
+ register "short_key_debounce" = "3" # 30ms
+ register "jack_insert_debounce" = "7" # 512ms
+ register "jack_eject_debounce" = "0"
+ device i2c 1a on end
+ end
+ end # I2C #4
+ device pci 1e.6 off end # SDCard
+ device pci 1f.3 on
+ chip drivers/generic/max98357a
+ register "hid" = ""MX98357A""
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)"
+ register "sdmode_delay" = "5"
+ device generic 0 on end
+ end
+ end # Intel HDA
+ end
+end
diff --git a/src/mainboard/google/glados/variants/sentry/devicetree.cb b/src/mainboard/google/glados/variants/sentry/devicetree.cb
deleted file mode 100644
index 502aad04ea..0000000000
--- a/src/mainboard/google/glados/variants/sentry/devicetree.cb
+++ /dev/null
@@ -1,249 +0,0 @@
-chip soc/intel/skylake
-
- register "gpu_pp_up_delay_ms" = "200"
- register "gpu_pp_down_delay_ms" = " 50"
- register "gpu_pp_cycle_delay_ms" = "500"
- register "gpu_pp_backlight_on_delay_ms" = " 1"
- register "gpu_pp_backlight_off_delay_ms" = "200"
-
- register "gpu_pch_backlight_pwm_hz" = "1000"
-
- # Enable deep Sx states
- register "deep_s3_enable_ac" = "0"
- register "deep_s3_enable_dc" = "0"
- register "deep_s5_enable_ac" = "1"
- register "deep_s5_enable_dc" = "1"
- register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
-
- # GPE configuration
- # Note that GPE events called out in ASL code rely on this
- # route. i.e. If this route changes then the affected GPE
- # offset bits also need to be changed.
- register "gpe0_dw0" = "GPP_B"
- register "gpe0_dw1" = "GPP_D"
- register "gpe0_dw2" = "GPP_E"
-
- # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x000c0201"
-
- # Enable "Intel Speed Shift Technology"
- register "speed_shift_enable" = "1"
-
- # Enable DPTF
- register "dptf_enable" = "1"
-
- # FSP Configuration
- register "ProbelessTrace" = "0"
- register "EnableLan" = "0"
- register "EnableSata" = "0"
- register "SataSalpSupport" = "0"
- register "SataMode" = "0"
- register "SataPortsEnable[0]" = "0"
- register "EnableAzalia" = "1"
- register "DspEnable" = "1"
- register "IoBufferOwnership" = "3"
- register "EnableTraceHub" = "0"
- register "SsicPortEnable" = "0"
- register "SmbusEnable" = "1"
- register "Cio2Enable" = "0"
- register "ScsEmmcEnabled" = "1"
- register "ScsEmmcHs400Enabled" = "1"
- register "ScsSdCardEnabled" = "2"
- register "PttSwitch" = "0"
- register "SkipExtGfxScan" = "1"
- register "Device4Enable" = "1"
- register "HeciEnabled" = "0"
- register "SaGv" = "3"
- register "PmConfigSlpS3MinAssert" = "2" # 50ms
- register "PmConfigSlpS4MinAssert" = "4" # 4s
- register "PmConfigSlpSusMinAssert" = "3" # 4s
- register "PmConfigSlpAMinAssert" = "3" # 2s
- register "PmTimerDisabled" = "1"
-
- register "pirqa_routing" = "PCH_IRQ11"
- register "pirqb_routing" = "PCH_IRQ10"
- register "pirqc_routing" = "PCH_IRQ11"
- register "pirqd_routing" = "PCH_IRQ11"
- register "pirqe_routing" = "PCH_IRQ11"
- register "pirqf_routing" = "PCH_IRQ11"
- register "pirqg_routing" = "PCH_IRQ11"
- register "pirqh_routing" = "PCH_IRQ11"
-
- # Enable Root port 1
- register "PcieRpEnable[0]" = "1"
- # Enable CLKREQ#
- register "PcieRpClkReqSupport[0]" = "1"
- # RP 1 uses SRCCLKREQ1#
- register "PcieRpClkReqNumber[0]" = "1"
-
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
- register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2
- register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
- register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
- register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
-
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
-
- # Must leave UART0 enabled or SD/eMMC will not work as PCI
- register "SerialIoDevMode" = "{
- [PchSerialIoIndexI2C0] = PchSerialIoPci,
- [PchSerialIoIndexI2C1] = PchSerialIoPci,
- [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
- [PchSerialIoIndexI2C4] = PchSerialIoPci,
- [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi0] = PchSerialIoDisabled,
- [PchSerialIoIndexSpi1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart0] = PchSerialIoPci,
- [PchSerialIoIndexUart1] = PchSerialIoDisabled,
- [PchSerialIoIndexUart2] = PchSerialIoSkipInit,
- }"
-
- # I2C0 is 3.3V
- register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
-
- # I2C4 is 1.8V
- register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8"
-
- # PL2 override 25W
- register "tdp_pl2_override" = "25"
-
- # Send an extra VR mailbox command for the PS4 exit issue
- register "SendVrMbxCmd" = "2"
-
- # Use default SD card detect GPIO configuration
- register "sdcard_cd_gpio_default" = "GPP_A7"
-
- # Lock Down
- register "common_soc_config" = "{
- .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
- }"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- device pci 00.0 on end # Host Bridge
- device pci 02.0 on end # Integrated Graphics Device
- device pci 14.0 on end # USB xHCI
- device pci 14.1 off end # USB xDCI (OTG)
- device pci 14.2 on end # Thermal Subsystem
- device pci 15.0 on
- chip drivers/i2c/generic
- register "hid" = ""RAYD0001""
- register "desc" = ""Raydium Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
- device i2c 39 on end
- end
- end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
- register "wake" = "GPE0_DW0_05"
- device i2c 15 on end
- end
- end # I2C #1
- device pci 15.2 off end # I2C #2
- device pci 15.3 off end # I2C #3
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT Redirection
- device pci 16.4 off end # Management Engine Interface 3
- device pci 17.0 off end # SATA
- device pci 19.0 on end # UART #2
- device pci 19.1 off end # I2C #5
- device pci 19.2 on
- chip drivers/i2c/nau8825
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
- register "jkdet_enable" = "1"
- register "jkdet_pull_enable" = "1"
- register "jkdet_pull_up" = "1"
- register "jkdet_polarity" = "1" # ActiveLow
- register "vref_impedance" = "2" # 125kOhm
- register "micbias_voltage" = "6" # 2.754
- register "sar_threshold_num" = "4"
- register "sar_threshold[0]" = "0x08"
- register "sar_threshold[1]" = "0x12"
- register "sar_threshold[2]" = "0x26"
- register "sar_threshold[3]" = "0x73"
- register "sar_hysteresis" = "0"
- register "sar_voltage" = "6"
- register "sar_compare_time" = "1" # 1us
- register "sar_sampling_time" = "1" # 4us
- register "short_key_debounce" = "3" # 30ms
- register "jack_insert_debounce" = "7" # 512ms
- register "jack_eject_debounce" = "0"
- device i2c 1a on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Left Speaker Amp""
- register "uid" = "0"
- register "device_present_gpio" = "GPP_E3"
- device i2c 34 on end
- end
- chip drivers/i2c/generic
- register "hid" = ""INT343B""
- register "desc" = ""SSM4567 Right Speaker Amp""
- register "uid" = "1"
- register "device_present_gpio" = "GPP_E3"
- device i2c 35 on end
- end
- end # I2C #4
- device pci 1c.0 on
- chip drivers/intel/wifi
- register "wake" = "GPE0_DW0_16"
- device pci 00.0 on end
- end
- end # PCI Express Port 1
- device pci 1c.1 off end # PCI Express Port 2
- device pci 1c.2 off end # PCI Express Port 3
- device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 off end # PCI Express Port 5
- device pci 1c.5 off end # PCI Express Port 6
- device pci 1c.6 off end # PCI Express Port 7
- device pci 1c.7 off end # PCI Express Port 8
- device pci 1d.0 off end # PCI Express Port 9
- device pci 1d.1 off end # PCI Express Port 10
- device pci 1d.2 off end # PCI Express Port 11
- device pci 1d.3 off end # PCI Express Port 12
- device pci 1e.0 on end # UART #0
- device pci 1e.1 off end # UART #1
- device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1e.4 on end # eMMC
- device pci 1e.5 off end # SDIO
- device pci 1e.6 on end # SDCard
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Interface
- device pci 1f.1 on end # P2SB
- device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on
- chip drivers/generic/max98357a
- register "hid" = ""MX98357A""
- register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
- register "device_present_gpio" = "GPP_E3"
- register "device_present_gpio_invert" = "1"
- register "sdmode_delay" = "5"
- device generic 0 on end
- end
- end # Intel HDA
- device pci 1f.4 on end # SMBus
- device pci 1f.5 on end # PCH SPI
- device pci 1f.6 off end # GbE
- end
-end
diff --git a/src/mainboard/google/glados/variants/sentry/overridetree.cb b/src/mainboard/google/glados/variants/sentry/overridetree.cb
new file mode 100644
index 0000000000..08d3dd3aba
--- /dev/null
+++ b/src/mainboard/google/glados/variants/sentry/overridetree.cb
@@ -0,0 +1,91 @@
+chip soc/intel/skylake
+
+ register "ScsSdCardEnabled" = "2"
+
+ register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
+ register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
+ register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
+ register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
+
+ # I2C0 is 3.3V
+ register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
+
+ # Use default SD card detect GPIO configuration
+ register "sdcard_cd_gpio_default" = "GPP_A7"
+
+ device domain 0 on
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""RAYD0001""
+ register "desc" = ""Raydium Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ device i2c 39 on end
+ end
+ end # I2C #0
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
+ register "wake" = "GPE0_DW0_05"
+ device i2c 15 on end
+ end
+ end # I2C #1
+ device pci 19.2 on
+ chip drivers/i2c/nau8825
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "jkdet_enable" = "1"
+ register "jkdet_pull_enable" = "1"
+ register "jkdet_pull_up" = "1"
+ register "jkdet_polarity" = "1" # ActiveLow
+ register "vref_impedance" = "2" # 125kOhm
+ register "micbias_voltage" = "6" # 2.754
+ register "sar_threshold_num" = "4"
+ register "sar_threshold[0]" = "0x08"
+ register "sar_threshold[1]" = "0x12"
+ register "sar_threshold[2]" = "0x26"
+ register "sar_threshold[3]" = "0x73"
+ register "sar_hysteresis" = "0"
+ register "sar_voltage" = "6"
+ register "sar_compare_time" = "1" # 1us
+ register "sar_sampling_time" = "1" # 4us
+ register "short_key_debounce" = "3" # 30ms
+ register "jack_insert_debounce" = "7" # 512ms
+ register "jack_eject_debounce" = "0"
+ device i2c 1a on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""INT343B""
+ register "desc" = ""SSM4567 Left Speaker Amp""
+ register "uid" = "0"
+ register "device_present_gpio" = "GPP_E3"
+ device i2c 34 on end
+ end
+ chip drivers/i2c/generic
+ register "hid" = ""INT343B""
+ register "desc" = ""SSM4567 Right Speaker Amp""
+ register "uid" = "1"
+ register "device_present_gpio" = "GPP_E3"
+ device i2c 35 on end
+ end
+ end # I2C #4
+ device pci 1e.6 on end # SDCard
+ device pci 1f.3 on
+ chip drivers/generic/max98357a
+ register "hid" = ""MX98357A""
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E3)"
+ register "device_present_gpio" = "GPP_E3"
+ register "device_present_gpio_invert" = "1"
+ register "sdmode_delay" = "5"
+ device generic 0 on end
+ end
+ end # Intel HDA
+ end
+end