diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/Kconfig | 2 | ||||
| -rw-r--r-- | src/mainboard/Kconfig | 8 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/Kconfig | 1 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/briq/Config.lb | 49 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/briq/Options.lb | 137 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/briq/briQ7400.cfg | 178 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/briq/clock.c | 42 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/briq/devicetree.cb | 22 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/briq/init.c | 47 |
9 files changed, 1 insertions, 485 deletions
diff --git a/src/Kconfig b/src/Kconfig index 7d268b0f0d..06d710851c 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -152,7 +152,7 @@ config USE_FALLBACK_IMAGE config HAVE_HARD_RESET bool - default n + default 0 config HAVE_INIT_TIMER bool diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig index a7bada779f..2837cb5128 100644 --- a/src/mainboard/Kconfig +++ b/src/mainboard/Kconfig @@ -92,8 +92,6 @@ config VENDOR_TELEVIDEO bool "TeleVideo" config VENDOR_THOMSON bool "Thomson" -config VENDOR_TOTAL_IMPACT - bool "Total Impact" config VENDOR_TYAN bool "Tyan" config VENDOR_VIA @@ -323,11 +321,6 @@ config MAINBOARD_VENDOR config MAINBOARD_VENDOR string - default "Total Impact" - depends on VENDOR_TOTAL_IMPACT - -config MAINBOARD_VENDOR - string default "Tyan" depends on VENDOR_TYAN @@ -390,7 +383,6 @@ source "src/mainboard/technexion/Kconfig" source "src/mainboard/technologic/Kconfig" source "src/mainboard/televideo/Kconfig" source "src/mainboard/thomson/Kconfig" -source "src/mainboard/totalimpact/Kconfig" source "src/mainboard/tyan/Kconfig" source "src/mainboard/via/Kconfig" diff --git a/src/mainboard/totalimpact/Kconfig b/src/mainboard/totalimpact/Kconfig deleted file mode 100644 index 792d600548..0000000000 --- a/src/mainboard/totalimpact/Kconfig +++ /dev/null @@ -1 +0,0 @@ -# diff --git a/src/mainboard/totalimpact/briq/Config.lb b/src/mainboard/totalimpact/briq/Config.lb deleted file mode 100644 index c380a86848..0000000000 --- a/src/mainboard/totalimpact/briq/Config.lb +++ /dev/null @@ -1,49 +0,0 @@ -## -## Config file for the Total Impact briQ -## - -## -## Early board initialization, called from ppc_main() -## -initobject init.o -initobject clock.o - -## -## Stage 2 timer support -## -object clock.o - -arch ppc end - -if CONFIG_BRIQ_750FX -dir /cpu/ppc/ppc7xx -end -if CONFIG_BRIQ_7400 -dir /cpu/ppc/mpc74xx -end - -## -## Include the secondary Configuration files -## -chip northbridge/ibm/cpc710 - device pci_domain 0 on # 32bit pci bridge - device pci 0.0 on - chip southbridge/winbond/w83c553 - # FIXME The function numbers are ok but the device id is wrong here! - device pci 0.0 on end # pci to isa bridge - device pci 0.1 on end # pci ide controller - end - end - end - device cpu_bus 0 on - # chip cpu/ppc/ppc7xx - # device cpu 0 on end - # end - end -end - -## -## Build the objects we have code for in this directory. -## - -addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a" diff --git a/src/mainboard/totalimpact/briq/Options.lb b/src/mainboard/totalimpact/briq/Options.lb deleted file mode 100644 index b33efdd4a0..0000000000 --- a/src/mainboard/totalimpact/briq/Options.lb +++ /dev/null @@ -1,137 +0,0 @@ -## -## Config file for the Total Impact briQ -## - -uses CONFIG_TTYS0_DIV -uses CONFIG_CBFS -uses CONFIG_ARCH_X86 -uses CONFIG_TTYS0_BASE -uses CONFIG_BRIQ_750FX -uses CONFIG_BRIQ_7400 -uses CONFIG_ISA_IO_BASE -uses CONFIG_ISA_MEM_BASE -uses CONFIG_PCIC0_CFGADDR -uses CONFIG_PCIC0_CFGDATA -uses CONFIG_IO_BASE -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_COMPRESS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_USE_INIT -uses CONFIG_NO_POST -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_IDE_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_IDE_BOOT_DRIVE -uses CONFIG_IDE_SWAB CONFIG_IDE_OFFSET -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_RESET -uses CONFIG_EXCEPTION_VECTORS -uses CONFIG_ROMBASE -uses CONFIG_ROMSTART -uses CONFIG_RAMBASE -uses CONFIG_RAMSTART -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_BRIQ_750FX -uses CONFIG_BRIQ_7400 -uses CONFIG_SYS_CLK_FREQ - -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PART_NUMBER -uses COREBOOT_EXTRA_VERSION -uses CONFIG_CROSS_COMPILE -uses CC -uses HOSTCC -uses CONFIG_OBJCOPY - -## -## Set memory map -## -default CONFIG_ISA_IO_BASE=0x80000000 -default CONFIG_ISA_MEM_BASE=0xc0000000 -default CONFIG_PCIC0_CFGADDR=0xff5f8000 -default CONFIG_PCIC0_CFGDATA=0xff5f8010 -default CONFIG_IO_BASE=CONFIG_ISA_IO_BASE - -## -## The briQ uses weird clocking, 4 = 115200 -## -default CONFIG_TTYS0_DIV=4 -## -## Set UART base address -## -default CONFIG_TTYS0_BASE=0x3f8 - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc" -default HOSTCC="gcc" -## use a cross compiler -#default CONFIG_CROSS_COMPILE="powerpc-eabi-" -#default CONFIG_CROSS_COMPILE="ppc_74xx-" -default CONFIG_ARCH_X86=0 - -## Use stage 1 initialization code -default CONFIG_USE_INIT=1 - -## We don't use compressed image -default CONFIG_COMPRESS=0 - -## Turn off POST codes -default CONFIG_NO_POST=1 - -## Enable serial console -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -default CONFIG_CONSOLE_SERIAL8250=1 - -## Boot linux from IDE -default CONFIG_IDE_PAYLOAD=1 -default CONFIG_IDE_BOOT_DRIVE=0 -default CONFIG_IDE_SWAB=1 -default CONFIG_IDE_OFFSET=0 - -# ROM is 1Mb -default CONFIG_ROM_SIZE=1048576 -default CONFIG_ROM_IMAGE_SIZE=128*1024 - -# Set stack and heap sizes (stage 2) -default CONFIG_STACK_SIZE=0x10000 -default CONFIG_HEAP_SIZE=0x10000 - -## -## System clock -## -default CONFIG_SYS_CLK_FREQ=33 - -# Sandpoint Demo Board -## Base of ROM -default CONFIG_ROMBASE=0xfff00000 - -## Sandpoint reset vector -default CONFIG_RESET=CONFIG_ROMBASE+0x100 - -## Exception vectors (other than reset vector) -default CONFIG_EXCEPTION_VECTORS=CONFIG_RESET+0x100 - -## Start of coreboot in the boot rom -## = CONFIG_RESET + exeception vector table size -default CONFIG_ROMSTART=CONFIG_RESET+0x3100 - -## Coreboot C code runs at this location in RAM -default CONFIG_RAMBASE=0x00100000 -default CONFIG_RAMSTART=0x00100000 - -default CONFIG_BRIQ_750FX=1 -#default CONFIG_BRIQ_7400=1 - -### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 -end diff --git a/src/mainboard/totalimpact/briq/briQ7400.cfg b/src/mainboard/totalimpact/briq/briQ7400.cfg deleted file mode 100644 index 22c64f7c77..0000000000 --- a/src/mainboard/totalimpact/briq/briQ7400.cfg +++ /dev/null @@ -1,178 +0,0 @@ -; bdiGDB configuration file for briQ (http://www.totalimpact.com) -; --------------------------------------------------------------- -; -; NOTE: As of June 2004, you will need to install a pull-down -; on the COP/JTAG QACK line. Without this, the BDI2000 -; is not able to halt the CPU -; (http://www.ultsol.com/faq-P210.htm) -; -[INIT] -; init core register -WREG MSR 0x00000000 ;clear MSR -; -; init CPC710 -; -WM32 0xFF000010 0xF0000000 ; RSTR -WM32 0xFF001020 0x00000000 ; SIOC -WM32 0xFF001000 0x00780000 ; UCTL (resID=7|TBE) -WM32 0xFF001030 0x00000000 ; ABCNTL -WM32 0xFF001040 0x00000000 ; SRST -WM32 0xFF001050 0x00000000 ; ERRC -WM32 0xFF001060 0x00000000 ; SESR -WM32 0xFF001070 0x00000000 ; SEAR -WM32 0xFF001100 0x000000E0 ; PGCHP (PReP|ARTRY|750|SYS_TEA) -WM32 0xFF001130 0x40000000 ; GPDIR -WM32 0xFF001150 0x40000000 ; GPOUT -WM32 0xFF001160 0x709C2508 ; ATAS -WM32 0xFF001170 0x00000000 ; AVDG -WM32 0xFF001220 0x00000000 ; MESR -WM32 0xFF001230 0x00000000 ; MEAR -WM32 0xFF001210 0x00000000 ; MWPR -WM32 0xFF001120 0x00000000 ; RGBAN1 -; -; init memory - this assumes 2 x 512MB DIMMs -; -WM32 0xFF001300 0x80000080 ; MCER0 -WM32 0xFF001310 0x82000080 ; MCER1 -WM32 0xFF001320 0x00000000 ; MCER2 -WM32 0xFF001330 0x00000000 ; MCER3 -WM32 0xFF001340 0x00000000 ; MCER4 -WM32 0xFF001350 0x00000000 ; MCER5 -WM32 0xFF001200 0xD2B06000 ; MCCR -DELAY 1000 -; -; enable pci -; -WM32 0xFF00000C 0x80000002 ; CNFR -WM32 0xFF200018 0xFF500000 ; PCIBAR -WM32 0xFF201000 0x80000000 ; PCIENB -WM32 0xFF00000C 0x00000000 ; CNFR -; -; config pci -; -WM32 0xFF5F8000 0x06000080 -WM16 0xFF5F8010 0xFFFF -WM32 0xFF5F8000 0x40000080 -WM16 0xFF5F8010 0x0000 -WM32 0xFF5F6120 0x40000000 ; PCIDG -WM32 0xFF5F7800 0x00000000 ; PIBAR -WM32 0xFF5F7810 0x00000000 ; PMBAR -WM32 0xFF5F7F20 0xA000C000 ; PR -WM32 0xFF5F7F30 0xFC000000 ; ACR -WM32 0xFF5F7F40 0xF8000000 ; MSIZE -WM32 0xFF5F7F60 0xF8000000 ; IOSIZE -WM32 0xFF5F7F80 0xC0000000 ; SMBAR -WM32 0xFF5F7FC0 0x80000000 ; SIBAR -WM32 0xFF5F8100 0x00000080 ; PSSIZE -WM32 0xFF5F8120 0x00000000 ; BARPS -WM32 0xFF5F8140 0x00000080 ; PSBAR -WM32 0xFF5F8200 0x00000000 ; BPMDLK -WM32 0xFF5F8210 0x00000000 ; TPMDLK -WM32 0xFF5F8220 0x00000000 ; BIODLK -WM32 0xFF5F8230 0x00000000 ; TIODLK -WM32 0xFF5F8000 0x04000080 -WM16 0xFF5F8010 0xA7FD -WM32 0xFF5F7EF0 0xFC000000 ; CRR -; -; VFD - output the sequence '01234' to show -; something is happening -; -;WM8 0x80000390 0x38 -;WM8 0x80000390 0x01 -;WM8 0x80000390 0x0C -;WM8 0x80000390 0x06 -;WM8 0x80000390 0x02 -;DELAY 100 -;WM8 0x80000391 0x30 -;DELAY 100 -;WM8 0x80000391 0x31 -;DELAY 100 -;WM8 0x80000391 0x32 -;DELAY 100 -;WM8 0x80000391 0x33 -;DELAY 100 -;WM8 0x80000391 0x34 -; -; UART - output the sequence '01234' to show -; something is happening -; -WM8 0x800003F9 0 -WM8 0x800003FA 1 -WM8 0x800003FB 0x83 -WM8 0x800003F8 4 ; 115200 -WM8 0x800003F9 0 -WM8 0x800003FB 0x3 -DELAY 100 -WM8 0x800003F8 0x30 -DELAY 100 -WM8 0x800003F8 0x31 -DELAY 100 -WM8 0x800003F8 0x32 -DELAY 100 -WM8 0x800003F8 0x33 -DELAY 100 -WM8 0x800003F8 0x34 -; -; define maximal transfer size -;TSZ1 0xFF800000 0xFFFFFFFF ;ROM space (only for PCI boot ROM) -TSZ4 0xFF800000 0xFFFFFFFF ;ROM space (only for Local bus flash) - - -[TARGET] -CPUTYPE 7400 ;the CPU type (603EV,750,8240,8260,7400) -JTAGCLOCK 0 ;use 16 MHz JTAG clock -WORKSPACE 0x00000000 ;workspace in target RAM for data cache flush -BDIMODE AGENT ;the BDI working mode (LOADONLY | AGENT | GATEWAY) -BREAKMODE HARD ;SOFT or HARD, HARD uses PPC hardware breakpoint -STEPMODE TRACE ;TRACE or HWBP, HWPB uses a hardware breakpoint -;VECTOR CATCH ;catch unhandled exceptions -DCACHE FLUSH ;data cache flushing (FLUSH | NOFLUSH) -;PARITY ON ;enable data parity generation -;MEMDELAY 4000 ;additional memory access delay -;REGLIST STD ;select register to transfer to GDB -;L2PM 0x00100000 0x80000 ;L2 privat memory -BOOTADDR 0xfff00100 -STARTUP RESET - -[HOST] -FORMAT ELF -LOAD MANUAL ;load code MANUAL or AUTO after reset -DEBUGPORT 2001 - -[FLASH] -; Am29LV800BB on local processor bus (RCS0) -; set PPMC7410 switch SW2-1 OFF => ROM on Local bus -; enable flash write in PICR1 (see INIT part) -; set maximal transfer size to 4 bytes (see INIT part) -CHIPTYPE AM29F ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16) -CHIPSIZE 0x100000 ;The size of one flash chip in bytes (e.g. Am29LV800BB = 0x100000) -BUSWIDTH 8 ;The width of the flash memory bus in bits (8 | 16 | 32 | 64) -;WORKSPACE 0x00000000 ;workspace in SDRAM -FILE coreboot.rom -FORMAT ELF -ERASE 0xFFF00000 ;erase sector 0 of flash -ERASE 0xFFF10000 ;erase sector 1 of flash -ERASE 0xFFF20000 ;erase sector 2 of flash -ERASE 0xFFF30000 ;erase sector 3 of flash -ERASE 0xFFF40000 ;erase sector 4 of flash -ERASE 0xFFF50000 ;erase sector 5 of flash -ERASE 0xFFF60000 ;erase sector 6 of flash -ERASE 0xFFF70000 ;erase sector 7 of flash -;ERASE 0xFFF80000 ;erase sector 8 of flash -;ERASE 0xFFF90000 ;erase sector 9 of flash -;ERASE 0xFFFA0000 ;erase sector 10 of flash -;ERASE 0xFFFB0000 ;erase sector 11 of flash -;ERASE 0xFFFC0000 ;erase sector 12 of flash -;ERASE 0xFFFD0000 ;erase sector 13 of flash -;ERASE 0xFFFE0000 ;erase sector 14 of flash -;ERASE 0xFFFF0000 ;erase sector 15 of flash - -[REGS] -;DMM1 0xFC000000 ;Embedded utility memory base address -;IMM1 0xFEC00000 0xFEE00000 ;configuration registers at byte offset 0 -;IMM2 0xFEC00000 0xFEE00001 ;configuration registers at byte offset 1 -;IMM3 0xFEC00000 0xFEE00002 ;configuration registers at byte offset 2 -;IMM4 0xFEC00000 0xFEE00003 ;configuration registers at byte offset 3 -FILE cpc700.def - - diff --git a/src/mainboard/totalimpact/briq/clock.c b/src/mainboard/totalimpact/briq/clock.c deleted file mode 100644 index 76827653a6..0000000000 --- a/src/mainboard/totalimpact/briq/clock.c +++ /dev/null @@ -1,42 +0,0 @@ -#include <stdint.h> -#include "../../../northbridge/ibm/cpc710/cpc710.h" - -/* - * Bus clock jumper settings on SIOR0 27:28 - */ -static uint32_t BusClockSpeed[] = { - 66000000, /* 00 */ - 83000000, /* 01 */ - 100000000, /* 10 */ - 133000000 /* 11 */ -}; - -/* - * Timer frequency is 1/4 of the bus clock frequency. - * - * For the briQ, bits 27:28 of SIOR0 encode bus clock frequency. - */ -unsigned long -get_timer_freq(void) -{ - uint32_t sior0 = getCPC710(CPC710_SDRAM0_SIOR0); - - return BusClockSpeed[(sior0 >> 3) & 0x2] / 4; -} - -/* - * Frequency of PCI bus. - * - * For the briQ, bit 29 of SIOR0 is 66MHz enable (active low). - */ -unsigned long -get_pci_bus_freq(void) -{ - uint32_t sior0 = getCPC710(CPC710_SDRAM0_SIOR0); - - if (sior0 & 0x4 == 0x4) - return 33000000; - - return 66000000; -} - diff --git a/src/mainboard/totalimpact/briq/devicetree.cb b/src/mainboard/totalimpact/briq/devicetree.cb deleted file mode 100644 index ceb278787d..0000000000 --- a/src/mainboard/totalimpact/briq/devicetree.cb +++ /dev/null @@ -1,22 +0,0 @@ -chip northbridge/ibm/cpc710 - device pci_domain 0 on # 32bit pci bridge - device pci 0.0 on - chip southbridge/winbond/w83c553 - # FIXME The function numbers are ok but the device id is wrong here! - device pci 0.0 on end # pci to isa bridge - device pci 0.1 on end # pci ide controller - end - end - end - device cpu_bus 0 on - # chip cpu/ppc/ppc7xx - # device cpu 0 on end - # end - end -end - -## -## Build the objects we have code for in this directory. -## - -addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a" diff --git a/src/mainboard/totalimpact/briq/init.c b/src/mainboard/totalimpact/briq/init.c deleted file mode 100644 index b7edf0b7e9..0000000000 --- a/src/mainboard/totalimpact/briq/init.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2003, Greg Watson <gwatson@lanl.gov> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Do very early board initialization: - */ - -#include <ppc_asm.tmpl> -#include <ppc.h> -#include <arch/io.h> -#include <console/console.h> -#include <uart8250.h> - -void -board_init(void) -{ -} - -void -board_init2(void) -{ - /* - * Enable UART - */ - uart8250_init(CONFIG_TTYS0_BASE, CONFIG_TTYS0_DIV, CONFIG_TTYS0_LCS); - printk_info("briQ initialized...\n"); - -} |