diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/via/epia-cn/romstage.c | 4 | ||||
| -rw-r--r-- | src/southbridge/via/Kconfig | 1 | ||||
| -rw-r--r-- | src/southbridge/via/Makefile.inc | 1 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/Kconfig | 22 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/Makefile.inc | 24 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/chip.h | 19 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/early_serial.c | 77 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/early_smbus.c | 247 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/ide.c | 113 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/lpc.c | 261 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/nic.c | 36 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/usb.c | 43 | ||||
| -rw-r--r-- | src/southbridge/via/vt8235/vt8235.c | 89 | ||||
| -rw-r--r-- | src/southbridge/via/vt8237r/early_serial.c | 77 |
14 files changed, 79 insertions, 935 deletions
diff --git a/src/mainboard/via/epia-cn/romstage.c b/src/mainboard/via/epia-cn/romstage.c index 4bf26155c6..e93d26bc5c 100644 --- a/src/mainboard/via/epia-cn/romstage.c +++ b/src/mainboard/via/epia-cn/romstage.c @@ -31,7 +31,7 @@ #include "drivers/pc80/udelay_io.c" #include <delay.h> #include "southbridge/via/vt8237r/early_smbus.c" -#include "southbridge/via/vt8235/early_serial.c" +#include "southbridge/via/vt8237r/early_serial.c" #include <spd.h> static inline int spd_read_byte(unsigned device, unsigned address) @@ -84,7 +84,7 @@ void main(unsigned long bist) /* Enable multifunction for northbridge. */ pci_write_config8(ctrl.d0f0, 0x4f, 0x01); - enable_vt8235_serial(); + enable_vt8237r_serial(); console_init(); enable_smbus(); smbus_fixup(&ctrl); diff --git a/src/southbridge/via/Kconfig b/src/southbridge/via/Kconfig index 641c2a4ae5..75a1395e8a 100644 --- a/src/southbridge/via/Kconfig +++ b/src/southbridge/via/Kconfig @@ -1,3 +1,2 @@ source src/southbridge/via/k8t890/Kconfig -source src/southbridge/via/vt8235/Kconfig source src/southbridge/via/vt8237r/Kconfig diff --git a/src/southbridge/via/Makefile.inc b/src/southbridge/via/Makefile.inc index 1c239b1f67..db19438005 100644 --- a/src/southbridge/via/Makefile.inc +++ b/src/southbridge/via/Makefile.inc @@ -1,3 +1,2 @@ subdirs-$(CONFIG_SOUTHBRIDGE_VIA_K8T890) += k8t890 -subdirs-$(CONFIG_SOUTHBRIDGE_VIA_VT8235) += vt8235 subdirs-$(CONFIG_SOUTHBRIDGE_VIA_VT8237R) += vt8237r diff --git a/src/southbridge/via/vt8235/Kconfig b/src/southbridge/via/vt8235/Kconfig deleted file mode 100644 index 1591274858..0000000000 --- a/src/southbridge/via/vt8235/Kconfig +++ /dev/null @@ -1,22 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008-2009 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -config SOUTHBRIDGE_VIA_VT8235 - bool - diff --git a/src/southbridge/via/vt8235/Makefile.inc b/src/southbridge/via/vt8235/Makefile.inc deleted file mode 100644 index 5c1068e8e4..0000000000 --- a/src/southbridge/via/vt8235/Makefile.inc +++ /dev/null @@ -1,24 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007, 2009 Rudolf Marek <r.marek@assembler.cz> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-y += vt8235.c -ramstage-y += ide.c -ramstage-y += lpc.c -ramstage-y += nic.c -ramstage-y += usb.c diff --git a/src/southbridge/via/vt8235/chip.h b/src/southbridge/via/vt8235/chip.h deleted file mode 100644 index eb1e82b7c8..0000000000 --- a/src/southbridge/via/vt8235/chip.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _SOUTHBRIDGE_VIA_VT8235 -#define _SOUTHBRIDGE_VIA_VT8235 - -struct southbridge_via_vt8235_config { - /* PCI function enables */ - /* i.e. so that pci scan bus will find them. */ - /* I am putting in IDE as an example but obviously this needs - * to be more complete! - */ - int enable_ide; - /* enables of functions of devices */ - int enable_usb; - int enable_native_ide; - int enable_com_ports; - int enable_keyboard; - int enable_nvram; -}; - -#endif /* _SOUTHBRIDGE_VIA_VT8235 */ diff --git a/src/southbridge/via/vt8235/early_serial.c b/src/southbridge/via/vt8235/early_serial.c deleted file mode 100644 index b9bec5fa08..0000000000 --- a/src/southbridge/via/vt8235/early_serial.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Enable the serial devices on the VIA - */ - - -/* The base address is 0x15c, 0x2e, depending on config bytes */ - -#define SIO_BASE 0x3f0 -#define SIO_DATA SIO_BASE+1 - -static void vt8235_writepnpaddr(uint8_t val) -{ - outb(val, 0x2e); - outb(val, 0xeb); -} - -static void vt8235_writepnpdata(uint8_t val) -{ - outb(val, 0x2f); - outb(val, 0xeb); -} - - -static void vt8235_writesiobyte(uint16_t reg, uint8_t val) -{ - outb(val, reg); -} - -static void vt8235_writesioword(uint16_t reg, uint16_t val) -{ - outw(val, reg); -} - - -/* regs we use: 85, and the southbridge devfn is defined by the - mainboard - */ - -static void enable_vt8235_serial(void) -{ - // turn on pnp - vt8235_writepnpaddr(0x87); - vt8235_writepnpaddr(0x87); - // now go ahead and set up com1. - // set address - vt8235_writepnpaddr(0x7); - vt8235_writepnpdata(0x2); - // enable serial out - vt8235_writepnpaddr(0x30); - vt8235_writepnpdata(0x1); - // serial port 1 base address (FEh) - vt8235_writepnpaddr(0x60); - vt8235_writepnpdata(0xfe); - // serial port 1 IRQ (04h) - vt8235_writepnpaddr(0x70); - vt8235_writepnpdata(0x4); - // serial port 1 control - vt8235_writepnpaddr(0xf0); - vt8235_writepnpdata(0x2); - // turn of pnp - vt8235_writepnpaddr(0xaa); - - // set up reg to set baud rate. - vt8235_writesiobyte(0x3fb, 0x80); - // Set 115 kb - vt8235_writesioword(0x3f8, 1); - // Set 9.6 kb - // WRITESIOWORD(0x3f8, 12) - // now set no parity, one stop, 8 bits - vt8235_writesiobyte(0x3fb, 3); - // now turn on RTS, DRT - vt8235_writesiobyte(0x3fc, 3); - // Enable interrupts - vt8235_writesiobyte(0x3f9, 0xf); - // should be done. Dump a char for fun. - vt8235_writesiobyte(0x3f8, 48); -} diff --git a/src/southbridge/via/vt8235/early_smbus.c b/src/southbridge/via/vt8235/early_smbus.c deleted file mode 100644 index c4bca9c210..0000000000 --- a/src/southbridge/via/vt8235/early_smbus.c +++ /dev/null @@ -1,247 +0,0 @@ -#define SMBUS_IO_BASE 0xf00 - -#define SMBHSTSTAT 0x0 -#define SMBSLVSTAT 0x1 -#define SMBHSTCTL 0x2 -#define SMBHSTCMD 0x3 -#define SMBXMITADD 0x4 -#define SMBHSTDAT0 0x5 -#define SMBHSTDAT1 0x6 -#define SMBBLKDAT 0x7 -#define SMBSLVCTL 0x8 -#define SMBTRNSADD 0x9 -#define SMBSLVDATA 0xa -#define SMLINK_PIN_CTL 0xe -#define SMBUS_PIN_CTL 0xf - -/* Define register settings */ -#define HOST_RESET 0xff -#define READ_CMD 0x01 // 1 in the 0 bit of SMBHSTADD states to READ - - -#define SMBUS_TIMEOUT (100*1000*10) - -#define I2C_TRANS_CMD 0x40 -#define CLOCK_SLAVE_ADDRESS 0x69 - -static void enable_smbus(void) -{ - device_t dev; - unsigned char c; - int i; - - /* Power management controller */ - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8235), 0); - - if (dev == PCI_DEV_INVALID) { - die("SMBUS controller not found\n"); - } - - // set IO base address to SMBUS_IO_BASE - pci_write_config16(dev, 0xd0, SMBUS_IO_BASE | 1); - - // Enable SMBus - pci_write_config8(dev, 0xd2, (0x4 << 1) | 1); - - /* make it work for I/O ... - */ - pci_write_config16(dev, 4, 1); - - /* FIX for half baud rate problem */ - /* let clocks and the like settle */ - /* as yet arbitrary count - 1000 is too little 5000 works */ - for(i = 0 ; i < 5000 ; i++) - outb(0x80,0x80); - - /* - * The VT1211 serial port needs 48 mhz clock, on power up it is getting - * only 24 mhz, there is some mysterious device on the smbus that can - * fix this...this code below does it. - * */ - outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT); - outb(0x7f, SMBUS_IO_BASE+SMBHSTDAT0); - outb(0x83, SMBUS_IO_BASE+SMBHSTCMD); - outb(CLOCK_SLAVE_ADDRESS<<1 , SMBUS_IO_BASE+SMBXMITADD); - outb(8 | I2C_TRANS_CMD, SMBUS_IO_BASE+SMBHSTCTL); - - for (;;) { - c = inb(SMBUS_IO_BASE+SMBHSTSTAT); - if ((c & 1) == 0) - break; - } -} - - -static inline void smbus_delay(void) -{ - outb(0x80, 0x80); -} - -static int smbus_wait_until_ready(void) -{ - unsigned char c; - unsigned long loops; - loops = SMBUS_TIMEOUT; - do { - smbus_delay(); - c = inb(SMBUS_IO_BASE + SMBHSTSTAT); - while((c & 1) == 1) { - print_debug("c is "); - print_debug_hex8(c); - print_debug("\n"); - c = inb(SMBUS_IO_BASE + SMBHSTSTAT); - /* nop */ - } - - } while(--loops); - return loops?0:-1; -} - -void smbus_reset(void) -{ - outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT); - outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT); - outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT); - outb(HOST_RESET, SMBUS_IO_BASE + SMBHSTSTAT); - - smbus_wait_until_ready(); - print_debug("After reset status "); - print_debug_hex8( inb(SMBUS_IO_BASE + SMBHSTSTAT)); - print_debug("\n"); -} - - - -static int smbus_wait_until_done(void) -{ - unsigned long loops; - unsigned char byte; - loops = SMBUS_TIMEOUT; - do { - smbus_delay(); - - byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); - if (byte & 1) - break; - - } while(--loops); - return loops?0:-1; -} - -static void smbus_print_error(unsigned char host_status_register) -{ - - print_err("smbus_error: "); - print_err_hex8(host_status_register); - print_err("\n"); - if (host_status_register & (1 << 4)) { - print_err("Interrupt/SMI# was Failed Bus Transaction\n"); - } - if (host_status_register & (1 << 3)) { - print_err("Bus Error\n"); - } - if (host_status_register & (1 << 2)) { - print_err("Device Error\n"); - } - if (host_status_register & (1 << 1)) { - print_err("Interrupt/SMI# was Successful Completion\n"); - } - if (host_status_register & (1 << 0)) { - print_err("Host Busy\n"); - } -} - - -/* SMBus routines borrowed from VIA's Trident Driver */ -/* this works, so I am not going to touch it for now -- rgm */ -static unsigned char smbus_read_byte(unsigned char devAdr, - unsigned char bIndex) -{ - unsigned short i; - unsigned char bData; - unsigned char sts = 0; - - /* clear host status */ - outb(0xff, SMBUS_IO_BASE); - - /* check SMBUS ready */ - for ( i = 0; i < 0xFFFF; i++ ) - if ( (inb(SMBUS_IO_BASE) & 0x01) == 0 ) - break; - - /* set host command */ - outb(bIndex, SMBUS_IO_BASE+3); - - /* set slave address */ - outb((devAdr << 1) | 0x01, SMBUS_IO_BASE+4); - - /* start */ - outb(0x48, SMBUS_IO_BASE+2); - - /* SMBUS Wait Ready */ - for ( i = 0; i < 0xFFFF; i++ ) - if ( ((sts = (inb(SMBUS_IO_BASE) & 0x1f)) & 0x01) == 0 ) - break; - - if ((sts & ~3) != 0) { - smbus_print_error(sts); - return 0; - } - bData=inb(SMBUS_IO_BASE+5); - - return bData; - -} - -/* for reference, here is the fancier version which we will use at some - * point - */ -# if 0 -int smbus_read_byte(unsigned device, unsigned address, unsigned char *result) -{ - unsigned char host_status_register; - unsigned char byte; - - reset(); - - smbus_wait_until_ready(); - - /* setup transaction */ - /* disable interrupts */ - outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); - /* set the device I'm talking too */ - outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD); - /* set the command/address... */ - outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD); - /* set up for a byte data read */ - outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), - SMBUS_IO_BASE + SMBHSTCTL); - - /* clear any lingering errors, so the transaction will run */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - - /* clear the data byte...*/ - outb(0, SMBUS_IO_BASE + SMBHSTDAT0); - - /* start the command */ - outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), - SMBUS_IO_BASE + SMBHSTCTL); - - /* poll for transaction completion */ - smbus_wait_until_done(); - - host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT); - - /* Ignore the In Use Status... */ - host_status_register &= ~(1 << 6); - - /* read results of transaction */ - byte = inb(SMBUS_IO_BASE + SMBHSTDAT0); - smbus_print_error(byte); - - *result = byte; - return host_status_register != 0x02; -} - -#endif diff --git a/src/southbridge/via/vt8235/ide.c b/src/southbridge/via/vt8235/ide.c deleted file mode 100644 index 176e70fea7..0000000000 --- a/src/southbridge/via/vt8235/ide.c +++ /dev/null @@ -1,113 +0,0 @@ -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <console/console.h> -#include "chip.h" - -static void ide_init(struct device *dev) -{ - struct southbridge_via_vt8235_config *conf = dev->chip_info; - unsigned char enables; - - printk(BIOS_INFO, "Enabling VIA IDE.\n"); - - /*if (!conf->enable_native_ide) { */ - /* - * Run the IDE controller in 'compatibility mode - i.e. don't - * use PCI interrupts. Using PCI ints confuses linux for some - * reason. - */ - printk(BIOS_INFO, "%s: enabling compatibility IDE addresses\n", - __func__); - enables = pci_read_config8(dev, 0x42); - printk(BIOS_DEBUG, "enables in reg 0x42 0x%x\n", enables); - enables &= ~0xc0; // compatibility mode - pci_write_config8(dev, 0x42, enables); - enables = pci_read_config8(dev, 0x42); - printk(BIOS_DEBUG, "enables in reg 0x42 read back as 0x%x\n", - enables); - /* } */ - - enables = pci_read_config8(dev, 0x40); - printk(BIOS_DEBUG, "enables in reg 0x40 0x%x\n", enables); - enables |= 3; - pci_write_config8(dev, 0x40, enables); - enables = pci_read_config8(dev, 0x40); - printk(BIOS_DEBUG, "enables in reg 0x40 read back as 0x%x\n", enables); - - // Enable prefetch buffers - enables = pci_read_config8(dev, 0x41); - enables |= 0xf0; - pci_write_config8(dev, 0x41, enables); - - // Lower thresholds (cause award does it) - enables = pci_read_config8(dev, 0x43); - enables &= ~0x0f; - enables |= 0x05; - pci_write_config8(dev, 0x43, enables); - - // PIO read prefetch counter (cause award does it) - pci_write_config8(dev, 0x44, 0x18); - - // Use memory read multiple - pci_write_config8(dev, 0x45, 0x1c); - - // address decoding. - // we want "flexible", i.e. 1f0-1f7 etc. or native PCI - // kevinh@ispiri.com - the standard linux drivers seem ass slow when - // used in native mode - I've changed back to classic - enables = pci_read_config8(dev, 0x9); - printk(BIOS_DEBUG, "enables in reg 0x9 0x%x\n", enables); - // by the book, set the low-order nibble to 0xa. - if (conf->enable_native_ide) { - enables &= ~0xf; - // cf/cg silicon needs an 'f' here. - enables |= 0xf; - } else { - enables &= ~0x5; - } - - pci_write_config8(dev, 0x9, enables); - enables = pci_read_config8(dev, 0x9); - printk(BIOS_DEBUG, "enables in reg 0x9 read back as 0x%x\n", enables); - - // standard bios sets master bit. - enables = pci_read_config8(dev, 0x4); - printk(BIOS_DEBUG, "command in reg 0x4 0x%x\n", enables); - enables |= 7; - - // No need for stepping - kevinh@ispiri.com - enables &= ~0x80; - - pci_write_config8(dev, 0x4, enables); - enables = pci_read_config8(dev, 0x4); - printk(BIOS_DEBUG, "command in reg 0x4 reads back as 0x%x\n", enables); - - if (!conf->enable_native_ide) { - // Use compatibility mode - per award bios - pci_write_config32(dev, 0x10, 0x0); - pci_write_config32(dev, 0x14, 0x0); - pci_write_config32(dev, 0x18, 0x0); - pci_write_config32(dev, 0x1c, 0x0); - - // Force interrupts to use compat mode - just like Award bios - pci_write_config8(dev, 0x3d, 0x0); - pci_write_config8(dev, 0x3c, 0xff); - } -} - -static struct device_operations ide_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = ide_init, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver northbridge_driver __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_82C586_1, -}; diff --git a/src/southbridge/via/vt8235/lpc.c b/src/southbridge/via/vt8235/lpc.c deleted file mode 100644 index e6aac65375..0000000000 --- a/src/southbridge/via/vt8235/lpc.c +++ /dev/null @@ -1,261 +0,0 @@ -#include <arch/io.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <pc80/mc146818rtc.h> -#include <arch/ioapic.h> -#include "chip.h" - -/* The epia-m is really short on interrupts available, so PCI interrupts A & D are ganged together and so are B & C. - This is how the Award bios sets it up too. - epia can be more generous as it does not need to reserve interrupts for cardbus devices, but if changed then - make sure that ACPI dsdt is changed to suit. - - IRQ 0 = timer - IRQ 1 = keyboard - IRQ 2 = cascade - IRQ 3 = COM 2 - IRQ 4 = COM 1 - IRQ 5 = available for PCI interrupts - IRQ 6 = floppy or available for PCI if floppy controller disabled - IRQ 7 = LPT or available if LPT port disabled - IRQ 8 = rtc - IRQ 9 = available for PCI interrupts - IRQ 10 = cardbus slot or available for PCI if no cardbus (ie epia) - IRQ 11 = cardbus slot or available for PCI if no cardbus (ie epia) - IRQ 12 = PS2 mouse (hardwired to 12) - IRQ 13 = legacy FPU interrupt - IRQ 14 = IDE controller 1 - IRQ 15 = IDE controller 2 - -*/ -static const unsigned char pciIrqs[4] = { 5 , 9 , 9, 5 }; - -static const unsigned char usbPins[4] = { 'A','B','C','D'}; -static const unsigned char enetPins[4] = { 'A','B','C','D'}; -static const unsigned char slotPins[4] = { 'B','C','D','A'}; -static const unsigned char firewirePins[4] = { 'B','C','D','A'}; -static const unsigned char vt8235Pins[4] = { 'A','B','C','D'}; -static const unsigned char vgaPins[4] = { 'A','B','C','D'}; -static const unsigned char cbPins[4] = { 'A','B','C','D'}; -static const unsigned char riserPins[4] = { 'A','B','C','D'}; - - -static unsigned char *pin_to_irq(const unsigned char *pin) -{ - static unsigned char Irqs[4]; - int i; - for (i = 0 ; i < 4 ; i++) - Irqs[i] = pciIrqs[ pin[i] - 'A' ]; - - return Irqs; -} - -static void pci_routing_fixup(struct device *dev) -{ - printk(BIOS_INFO, "%s: dev is %p\n", __func__, dev); - - /* set up PCI IRQ routing */ - pci_write_config8(dev, 0x55, pciIrqs[0] << 4); - pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) ); - pci_write_config8(dev, 0x57, pciIrqs[3] << 4); - - - // firewire built into southbridge - printk(BIOS_INFO, "setting firewire\n"); - pci_assign_irqs(0, 0x0d, pin_to_irq(firewirePins)); - - // Standard usb components - printk(BIOS_INFO, "setting usb\n"); - pci_assign_irqs(0, 0x10, pin_to_irq(usbPins)); - - // VT8235 + sound hardware - printk(BIOS_INFO, "setting vt8235\n"); - pci_assign_irqs(0, 0x11, pin_to_irq(vt8235Pins)); - - // Ethernet built into southbridge - printk(BIOS_INFO, "setting ethernet\n"); - pci_assign_irqs(0, 0x12, pin_to_irq(enetPins)); - - // VGA - printk(BIOS_INFO, "setting vga\n"); - pci_assign_irqs(1, 0x00, pin_to_irq(vgaPins)); - - // PCI slot - printk(BIOS_INFO, "setting pci slot\n"); - pci_assign_irqs(0, 0x14, pin_to_irq(slotPins)); - - // Cardbus slot - printk(BIOS_INFO, "setting cardbus slot\n"); - pci_assign_irqs(0, 0x0a, pin_to_irq(cbPins)); - - // Via 2 slot riser card 2nd slot - printk(BIOS_INFO, "setting riser slot\n"); - pci_assign_irqs(0, 0x13, pin_to_irq(riserPins)); - - printk(BIOS_SPEW, "%s: DONE\n", __func__); -} - -/* - * Set up the power management capabilities directly into ACPI mode. This - * avoids having to handle any System Management Interrupts (SMI's) which I - * can't figure out how to do !!!! - */ - -static void setup_pm(device_t dev) -{ - // Set gen config 0 - pci_write_config8(dev, 0x80, 0x20); - - // Set ACPI base address to IO 0x400 - pci_write_config16(dev, 0x88, 0x0401); - - // set ACPI irq to 5 - pci_write_config8(dev, 0x82, 0x45); - - // primary interrupt channel - pci_write_config16(dev, 0x84, 0x30f2); - - // throttle / stop clock control - pci_write_config8(dev, 0x8d, 0x18); - - pci_write_config8(dev, 0x93, 0x88); - pci_write_config8(dev, 0x94, 0xb0); - pci_write_config8(dev, 0x95, 0xc0); - pci_write_config8(dev, 0x98, 0); - pci_write_config8(dev, 0x99, 0xea); - pci_write_config8(dev, 0xe4, 0x14); - pci_write_config8(dev, 0xe5, 0x08); - - - // Enable ACPI access (and setup like award) - pci_write_config8(dev, 0x81, 0x84); - - outw(0xffff, 0x400); - outw(0xffff, 0x420); - outw(0xffff, 0x428); - outl(0xffffffff, 0x430); - - outw(0x0, 0x424); - outw(0x0, 0x42a); - outw(0x1, 0x42c); - outl(0x0, 0x434); - outl(0x01, 0x438); - outb(0x0, 0x442); - outl(0xffff7fff, 0x448); - outw(0x001, 0x404); -} - -static void vt8235_init(struct device *dev) -{ - unsigned char enables; - - printk(BIOS_DEBUG, "vt8235 init\n"); - - // enable the internal I/O decode - enables = pci_read_config8(dev, 0x6C); - enables |= 0x80; - pci_write_config8(dev, 0x6C, enables); - - // Map 4MB of FLASH into the address space - pci_write_config8(dev, 0x41, 0x7f); - - // Set bit 6 of 0x40, because Award does it (IO recovery time) - // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI - // interrupts can be properly marked as level triggered. - enables = pci_read_config8(dev, 0x40); - enables |= 0x45; - pci_write_config8(dev, 0x40, enables); - - // Set 0x42 to 0xf0 to match Award bios - enables = pci_read_config8(dev, 0x42); - enables |= 0xf0; - pci_write_config8(dev, 0x42, enables); - - /* Set 0x58 to 0x03 to match Award */ - pci_write_config8(dev, 0x58, 0x03); - - /* Set bit 3 of 0x4f to match award (use INIT# as cpu reset) */ - enables = pci_read_config8(dev, 0x4f); - enables |= 0x08; - pci_write_config8(dev, 0x4f, enables); - - // Set bit 3 of 0x4a, to match award (dummy pci request) - enables = pci_read_config8(dev, 0x4a); - enables |= 0x08; - pci_write_config8(dev, 0x4a, enables); - - // Set bit 3 of 0x4f to match award (use INIT# as cpu reset) - enables = pci_read_config8(dev, 0x4f); - enables |= 0x08; - pci_write_config8(dev, 0x4f, enables); - - // Set 0x58 to 0x03 to match Award - pci_write_config8(dev, 0x58, 0x03); - - - /* enable serial irq */ - pci_write_config8(dev, 0x52, 0x9); - - /* dma */ - pci_write_config8(dev, 0x53, 0x00); - - // Power management setup - setup_pm(dev); - - /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */ - pci_write_config8(dev, 0x40, 0x54); - - // Start the rtc - cmos_init(0); -} - -/* total kludge to get lxb to call our children's set/enable functions - these are not called unless this - device has a resource to set - so set a dummy one */ -static void vt8235_read_resources(device_t dev) -{ - struct resource *res; - - pci_dev_read_resources(dev); - - res = new_resource(dev, 1); - res->base = 0x0UL; - res->size = 0x1000UL; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static void vt8235_set_resources(device_t dev) -{ - //struct resource *resource; - //resource = find_resource(dev,1); - //resource->flags |= IORESOURCE_STORED; - pci_dev_set_resources(dev); -} - -static void southbridge_init(struct device *dev) -{ - vt8235_init(dev); - pci_routing_fixup(dev); -} - -static struct device_operations vt8235_lpc_ops = { - .read_resources = vt8235_read_resources, - .set_resources = vt8235_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = southbridge_init, - .scan_bus = scan_static_bus, -}; - -static const struct pci_driver lpc_driver __pci_driver = { - .ops = &vt8235_lpc_ops, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_8235, -}; diff --git a/src/southbridge/via/vt8235/nic.c b/src/southbridge/via/vt8235/nic.c deleted file mode 100644 index 71f169c055..0000000000 --- a/src/southbridge/via/vt8235/nic.c +++ /dev/null @@ -1,36 +0,0 @@ -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> - -/* - * Enable the ethernet device and turn off stepping (because it is integrated - * inside the southbridge) - */ -static void nic_init(struct device *dev) -{ - uint8_t byte; - - printk(BIOS_DEBUG, "Configuring VIA Rhine LAN\n"); - - /* We don't need stepping - though the device supports it */ - byte = pci_read_config8(dev, PCI_COMMAND); - byte &= ~PCI_COMMAND_WAIT; - pci_write_config8(dev, PCI_COMMAND, byte); -} - -static struct device_operations nic_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = nic_init, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver northbridge_driver __pci_driver = { - .ops = &nic_ops, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_8233_7, -}; diff --git a/src/southbridge/via/vt8235/usb.c b/src/southbridge/via/vt8235/usb.c deleted file mode 100644 index d684968a31..0000000000 --- a/src/southbridge/via/vt8235/usb.c +++ /dev/null @@ -1,43 +0,0 @@ -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> - -/* really nothing to do here, both usb 1.1 & 2.0 are normal PCI devices and so get resources allocated - properly. They are part of the southbridge and are enabled in the chip enable function for the southbridge */ - -static void usb_init(struct device *dev) -{ - printk(BIOS_DEBUG, "Configuring VIA USB 1.1\n"); - - /* pci_write_config8(dev, 0x04, 0x07); */ - - /* - * To disable; though do we need to do this? - pci_write_config8(dev1, 0x3c, 0x00); - pci_write_config8(dev1, 0x04, 0x00); - - Also, on the root dev, for enable: - regval = pci_read_config8(dev0, 0x50); - regval &= ~(0x36); - pci_write_config8(dev0, 0x50, regval); - - (regval |= 0x36; for disable) - */ -} - -static struct device_operations usb_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb_init, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver northbridge_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_82C586_2, -}; diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c deleted file mode 100644 index 0f37be2aee..0000000000 --- a/src/southbridge/via/vt8235/vt8235.c +++ /dev/null @@ -1,89 +0,0 @@ -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <pc80/keyboard.h> -#include <pc80/i8259.h> -#include "chip.h" - -static void keyboard_on(struct device *dev) -{ - u8 regval; - - regval = pci_read_config8(dev, 0x51); - regval |= 0x05; - regval &= 0xfd; - pci_write_config8(dev, 0x51, regval); - - pc_keyboard_init(); -} - -#ifdef UNUSED_CODE -void dump_south(device_t dev0) -{ - int i,j; - - for(i = 0; i < 256; i += 16) { - printk(BIOS_DEBUG, "0x%x: ", i); - for(j = 0; j < 16; j++) { - printk(BIOS_DEBUG, "%02x ", pci_read_config8(dev0, i+j)); - } - printk(BIOS_DEBUG, "\n"); - } -} - -void set_led(void) -{ - // set power led to steady now that coreboot has virtually done its job - device_t dev; - dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 0); - pci_write_config8(dev, 0x94, 0xb0); -} -#endif - -static void vt8235_enable(struct device *dev) -{ - u8 regval; - u16 vendor,model; - - vendor = pci_read_config16(dev,0); - model = pci_read_config16(dev,0x2); - - printk(BIOS_DEBUG, "In vt8235_enable %04x %04x.\n",vendor,model); - - /* If this is not the southbridge itself just return. - * This is necessary because USB devices are slot 10, whereas this - * device is slot 11 therefore usb devices get called first during - * the bus scan. We don't want to wait until we could do dev->init - * because that's too late. - */ - - if( (vendor != PCI_VENDOR_ID_VIA) || (model != PCI_DEVICE_ID_VIA_8235)) - return; - - printk(BIOS_DEBUG, "Initialising Devices\n"); - - /* make sure interrupt controller is configured before keyboard init */ - setup_i8259(); - - /* enable RTC and ethernet */ - regval = pci_read_config8(dev, 0x51); - regval |= 0x18; - pci_write_config8(dev, 0x51, regval); - - /* turn on keyboard */ - keyboard_on(dev); - - /* enable USB 1.1 & USB 2.0 - redundant really since we've - * already been there - see note above - */ - regval = pci_read_config8(dev, 0x50); - regval &= ~(0x36); - pci_write_config8(dev, 0x50, regval); -} - -struct chip_operations southbridge_via_vt8235_ops = { - CHIP_NAME("VIA VT8235 Southbridge") - .enable_dev = vt8235_enable, -}; diff --git a/src/southbridge/via/vt8237r/early_serial.c b/src/southbridge/via/vt8237r/early_serial.c new file mode 100644 index 0000000000..9143f4690a --- /dev/null +++ b/src/southbridge/via/vt8237r/early_serial.c @@ -0,0 +1,77 @@ +/* + * Enable the serial devices on the VIA + */ + + +/* The base address is 0x15c, 0x2e, depending on config bytes */ + +#define SIO_BASE 0x3f0 +#define SIO_DATA SIO_BASE+1 + +static void vt8237r_writepnpaddr(uint8_t val) +{ + outb(val, 0x2e); + outb(val, 0xeb); +} + +static void vt8237r_writepnpdata(uint8_t val) +{ + outb(val, 0x2f); + outb(val, 0xeb); +} + + +static void vt8237r_writesiobyte(uint16_t reg, uint8_t val) +{ + outb(val, reg); +} + +static void vt8237r_writesioword(uint16_t reg, uint16_t val) +{ + outw(val, reg); +} + + +/* regs we use: 85, and the southbridge devfn is defined by the + mainboard + */ + +static void enable_vt8237r_serial(void) +{ + // turn on pnp + vt8237r_writepnpaddr(0x87); + vt8237r_writepnpaddr(0x87); + // now go ahead and set up com1. + // set address + vt8237r_writepnpaddr(0x7); + vt8237r_writepnpdata(0x2); + // enable serial out + vt8237r_writepnpaddr(0x30); + vt8237r_writepnpdata(0x1); + // serial port 1 base address (FEh) + vt8237r_writepnpaddr(0x60); + vt8237r_writepnpdata(0xfe); + // serial port 1 IRQ (04h) + vt8237r_writepnpaddr(0x70); + vt8237r_writepnpdata(0x4); + // serial port 1 control + vt8237r_writepnpaddr(0xf0); + vt8237r_writepnpdata(0x2); + // turn of pnp + vt8237r_writepnpaddr(0xaa); + + // set up reg to set baud rate. + vt8237r_writesiobyte(0x3fb, 0x80); + // Set 115 kb + vt8237r_writesioword(0x3f8, 1); + // Set 9.6 kb + // WRITESIOWORD(0x3f8, 12) + // now set no parity, one stop, 8 bits + vt8237r_writesiobyte(0x3fb, 3); + // now turn on RTS, DRT + vt8237r_writesiobyte(0x3fc, 3); + // Enable interrupts + vt8237r_writesiobyte(0x3f9, 0xf); + // should be done. Dump a char for fun. + vt8237r_writesiobyte(0x3f8, 48); +} |