summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/jetway/j7f24/romstage.c5
-rw-r--r--src/northbridge/via/cn700/northbridge.c2
-rw-r--r--src/northbridge/via/cn700/raminit.c12
-rw-r--r--src/southbridge/via/vt8237r/vt8237r_early_smbus.c6
4 files changed, 12 insertions, 13 deletions
diff --git a/src/mainboard/jetway/j7f24/romstage.c b/src/mainboard/jetway/j7f24/romstage.c
index 42ed915472..f2f42320b1 100644
--- a/src/mainboard/jetway/j7f24/romstage.c
+++ b/src/mainboard/jetway/j7f24/romstage.c
@@ -99,11 +99,6 @@ void main(unsigned long bist)
enable_smbus();
smbus_fixup(&ctrl);
- if (bist == 0) {
- print_debug("doing early_mtrr\n");
- early_mtrr_init();
- }
-
/* Halt if there was a built-in self test failure. */
report_bist_failure(bist);
diff --git a/src/northbridge/via/cn700/northbridge.c b/src/northbridge/via/cn700/northbridge.c
index 6afd760f83..dad7c468dd 100644
--- a/src/northbridge/via/cn700/northbridge.c
+++ b/src/northbridge/via/cn700/northbridge.c
@@ -177,7 +177,7 @@ static void pci_domain_set_resources(device_t dev)
}
tomk = rambits * 64 * 1024;
- printk(BIOS_SPEW, "tomk is 0x%lx\n", tomk);
+ printk(BIOS_DEBUG, "tomk is 0x%lx\n", tomk);
/* Compute the Top Of Low Memory (TOLM), in Kb. */
tolmk = pci_tolm >> 10;
if (tolmk >= tomk) {
diff --git a/src/northbridge/via/cn700/raminit.c b/src/northbridge/via/cn700/raminit.c
index 20b0afeb6e..acb40dc622 100644
--- a/src/northbridge/via/cn700/raminit.c
+++ b/src/northbridge/via/cn700/raminit.c
@@ -183,6 +183,8 @@ static void sdram_set_size(const struct mem_controller *ctrl)
if (result == 0xff)
die("DRAM module size too big, not supported by CN700\n");
+ else
+ printk(BIOS_DEBUG, "Found %iMB of ram\n", result * ranks * 64);
pci_write_config8(ctrl->d0f3, 0x40, result);
pci_write_config8(ctrl->d0f3, 0x48, 0x00);
@@ -400,18 +402,18 @@ static void sdram_enable(device_t dev, unsigned long rank_address)
read32(rank_address + 0x10);
/* 3. Mode register set. */
- PRINT_DEBUG_MEM("RAM Enable 4: Mode register set\n");
+ PRINT_DEBUG_MEM("RAM Enable 3: Mode register set\n");
do_ram_command(dev, RAM_COMMAND_MRS);
read32(rank_address + 0x120000); /* EMRS DLL Enable */
read32(rank_address + 0x800); /* MRS DLL Reset */
/* 4. Precharge all again. */
- PRINT_DEBUG_MEM("RAM Enable 2: Precharge all\n");
+ PRINT_DEBUG_MEM("RAM Enable 4: Precharge all\n");
do_ram_command(dev, RAM_COMMAND_PRECHARGE);
read32(rank_address + 0x0);
/* 5. Perform 8 refresh cycles. Wait tRC each time. */
- PRINT_DEBUG_MEM("RAM Enable 3: CBR\n");
+ PRINT_DEBUG_MEM("RAM Enable 5: CBR\n");
do_ram_command(dev, RAM_COMMAND_CBR);
for (i = 0; i < 8; i++) {
read32(rank_address + 0x20);
@@ -419,7 +421,7 @@ static void sdram_enable(device_t dev, unsigned long rank_address)
}
/* 6. Mode register set. */
- PRINT_DEBUG_MEM("RAM Enable 4: Mode register set\n");
+ PRINT_DEBUG_MEM("RAM Enable 6: Mode register set\n");
/* Safe value for now, BL=8, WR=5, CAS=4 */
/*
* (E)MRS values are from the BPG. No direct explanation is given, but
@@ -432,7 +434,7 @@ static void sdram_enable(device_t dev, unsigned long rank_address)
read32(rank_address + 0x120020); /* EMRS OCD Calibration Mode Exit */
/* 8. Normal operation */
- PRINT_DEBUG_MEM("RAM Enable 5: Normal operation\n");
+ PRINT_DEBUG_MEM("RAM Enable 7: Normal operation\n");
do_ram_command(dev, RAM_COMMAND_NORMAL);
read32(rank_address + 0x30);
}
diff --git a/src/southbridge/via/vt8237r/vt8237r_early_smbus.c b/src/southbridge/via/vt8237r/vt8237r_early_smbus.c
index 0523092b11..357ad819c0 100644
--- a/src/southbridge/via/vt8237r/vt8237r_early_smbus.c
+++ b/src/southbridge/via/vt8237r/vt8237r_early_smbus.c
@@ -61,8 +61,10 @@ static void smbus_wait_until_ready(void)
PRINT_DEBUG("Waiting until SMBus ready\n");
- /* Yes, this is a mess, but it's the easiest way to do it. */
- /* XXX not so messy, but an explanation of the hack would have been better */
+ /* Loop up to SMBUS_TIMEOUT times, waiting for bit 0 of the
+ * SMBus Host Status register to go to 0, indicating the operation
+ * was completed successfully. I don't remember why I did it this way,
+ * but I think it was because ROMCC was running low on registers */
loops = 0;
while ((inb(SMBHSTSTAT) & 1) == 1 && loops < SMBUS_TIMEOUT)
++loops;