summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/cpu/amd/model_lx/vsmsetup.c23
-rw-r--r--src/northbridge/amd/lx/northbridge.c8
-rw-r--r--src/northbridge/amd/lx/northbridgeinit.c8
-rw-r--r--src/northbridge/amd/lx/raminit.c3
-rw-r--r--src/southbridge/amd/cs5536/cs5536.c26
-rw-r--r--src/southbridge/amd/cs5536/cs5536_early_setup.c12
-rw-r--r--src/southbridge/amd/sb600/sb600_hda.c18
-rw-r--r--src/southbridge/amd/sb600/sb600_sata.c8
-rw-r--r--src/southbridge/amd/sb600/sb600_usb.c6
-rw-r--r--src/southbridge/amd/sb700/sb700_hda.c18
-rw-r--r--src/southbridge/amd/sb700/sb700_usb.c12
11 files changed, 65 insertions, 77 deletions
diff --git a/src/cpu/amd/model_lx/vsmsetup.c b/src/cpu/amd/model_lx/vsmsetup.c
index eb94e23a2e..2c871b49dd 100644
--- a/src/cpu/amd/model_lx/vsmsetup.c
+++ b/src/cpu/amd/model_lx/vsmsetup.c
@@ -290,7 +290,7 @@ void do_vsmbios(void)
if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) {
printk_err("do_vsmbios: Failed to load VSA.\n");
}
- buf = VSA2_BUFFER;
+ buf = (unsigned char *)VSA2_BUFFER;
printk_debug("buf %p *buf %d buf[256k] %d\n",
buf, buf[0], buf[SMM_SIZE * 1024]);
printk_debug("buf[0x20] signature is %x:%x:%x:%x\n",
@@ -501,15 +501,15 @@ int biosint(unsigned long intnumber,
printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n",
ebp, esp, edi, esi);
printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n",
- ip, cs, flags);
+ (u32)ip, (u32)cs, (u32)flags);
printk_debug("biosint: gs 0x%x fs 0x%x ds 0x%x es 0x%x\n",
- gsfs >> 16, gsfs & 0xffff, dses >> 16, dses & 0xffff);
+ (u16)(gsfs >> 16), (u16)(gsfs & 0xffff), (u16)(dses >> 16), (u16)(dses & 0xffff));
// cases in a good compiler are just as good as your own tables.
switch (intnumber) {
case 0 ... 15:
// These are not BIOS service, but the CPU-generated exceptions
- printk_info("biosint: Oops, exception %u\n", intnumber);
+ printk_info("biosint: Oops, exception 0x%x\n", (u32)intnumber);
if (esp < 0x1000) {
printk_debug("Stack contents: ");
while (esp < 0x1000) {
@@ -537,7 +537,7 @@ int biosint(unsigned long intnumber,
&ebx, &edx, &ecx, &eax, &flags);
break;
default:
- printk_info("BIOSINT: Unsupport int #0x%x\n", intnumber);
+ printk_info("BIOSINT: Unsupported int #0x%x\n", (u32)intnumber);
break;
}
if (ret)
@@ -617,16 +617,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
unsigned long *pesp, unsigned long *pebx, unsigned long *pedx,
unsigned long *pecx, unsigned long *peax, unsigned long *pflags)
{
- unsigned long edi = *pedi;
- unsigned long esi = *pesi;
- unsigned long ebp = *pebp;
- unsigned long esp = *pesp;
- unsigned long ebx = *pebx;
- unsigned long edx = *pedx;
- unsigned long ecx = *pecx;
- unsigned long eax = *peax;
- unsigned long flags = *pflags;
- unsigned short func = (unsigned short)eax;
+ unsigned short func = (unsigned short)*peax;
int retval = 0;
unsigned short devid, vendorid, devfn;
short devindex; /* Use short to get rid of gabage in upper half of 32-bit register */
@@ -740,7 +731,7 @@ int handleint21(unsigned long *edi, unsigned long *esi, unsigned long *ebp,
unsigned long *ecx, unsigned long *eax, unsigned long *flags)
{
int res = -1;
- printk_debug("handleint21, eax 0x%x\n", *eax);
+ printk_debug("handleint21, eax 0x%x\n", (u32)*eax);
switch (*eax & 0xffff) {
case 0x5f19:
break;
diff --git a/src/northbridge/amd/lx/northbridge.c b/src/northbridge/amd/lx/northbridge.c
index 7757d03c4b..935d1f2b5c 100644
--- a/src/northbridge/amd/lx/northbridge.c
+++ b/src/northbridge/amd/lx/northbridge.c
@@ -253,16 +253,16 @@ void print_conf(void)
}
iol = inl(GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
+ printk_debug("IOR 0x%08X is now 0x%08lX\n",
GPIO_IO_BASE + GPIOL_INPUT_ENABLE, iol);
iol = inl(GPIOL_EVENTS_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
+ printk_debug("IOR 0x%08X is now 0x%08lX\n",
GPIO_IO_BASE + GPIOL_EVENTS_ENABLE, iol);
iol = inl(GPIOL_INPUT_INVERT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
+ printk_debug("IOR 0x%08X is now 0x%08lX\n",
GPIO_IO_BASE + GPIOL_INPUT_INVERT_ENABLE, iol);
iol = inl(GPIO_MAPPER_X);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_IO_BASE + GPIO_MAPPER_X,
+ printk_debug("IOR 0x%08X is now 0x%08lX\n", GPIO_IO_BASE + GPIO_MAPPER_X,
iol);
#endif //CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
}
diff --git a/src/northbridge/amd/lx/northbridgeinit.c b/src/northbridge/amd/lx/northbridgeinit.c
index 8c7a7a8af6..4336e82196 100644
--- a/src/northbridge/amd/lx/northbridgeinit.c
+++ b/src/northbridge/amd/lx/northbridgeinit.c
@@ -107,7 +107,7 @@ static void writeglmsr(struct gliutable *gl)
msr.lo = gl->lo;
msr.hi = gl->hi;
wrmsr(gl->desc_name, msr); // MSR - see table above
- printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); // GX3
+ printk_debug("%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); // GX3
}
static void ShadowInit(struct gliutable *gl)
@@ -147,7 +147,7 @@ static void SysmemInit(struct gliutable *gl)
msr.lo = sizebytes;
wrmsr(gl->desc_name, msr); // MSR - see table above
- printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __func__,
+ printk_debug("%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__,
gl->desc_name, msr.hi, msr.lo);
}
@@ -173,7 +173,7 @@ static void SMMGL0Init(struct gliutable *gl)
msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff;
wrmsr(gl->desc_name, msr); // MSR - See table above
- printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __func__,
+ printk_debug("%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__,
gl->desc_name, msr.hi, msr.lo);
}
@@ -190,7 +190,7 @@ static void SMMGL1Init(struct gliutable *gl)
msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff;
wrmsr(gl->desc_name, msr); // MSR - See table above
- printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __func__,
+ printk_debug("%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__,
gl->desc_name, msr.hi, msr.lo);
}
diff --git a/src/northbridge/amd/lx/raminit.c b/src/northbridge/amd/lx/raminit.c
index 54618c314b..aafcde257a 100644
--- a/src/northbridge/amd/lx/raminit.c
+++ b/src/northbridge/amd/lx/raminit.c
@@ -27,12 +27,13 @@ static const unsigned char NumColAddr[] = {
0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
};
-void banner(char *s)
+void banner(const char *s)
{
print_debug("===========================");
print_debug(s);
print_debug("======================================\r\n");
}
+
void hcf(void)
{
print_emerg("DIE\r\n");
diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c
index 905d71f052..e974d399d1 100644
--- a/src/southbridge/amd/cs5536/cs5536.c
+++ b/src/southbridge/amd/cs5536/cs5536.c
@@ -35,7 +35,7 @@
#include "cs5536.h"
struct msrinit {
- uint32_t msrnum;
+ u32 msrnum;
msr_t msr;
};
@@ -61,8 +61,8 @@ struct msrinit CS5536_CLOCK_GATING_TABLE[] = {
};
struct acpiinit {
- uint16_t ioreg;
- uint32_t regdata;
+ u16 ioreg;
+ u32 regdata;
};
struct acpiinit acpi_init_table[] = {
@@ -95,7 +95,7 @@ struct FLASH_DEVICE FlashInitTable[] = {
#define FlashInitTableLen (ARRAY_SIZE(FlashInitTable))
-uint32_t FlashPort[] = {
+u32 FlashPort[] = {
MDD_LBAR_FLSH0,
MDD_LBAR_FLSH1,
MDD_LBAR_FLSH2,
@@ -111,8 +111,8 @@ uint32_t FlashPort[] = {
/* ***************************************************************************/
static void pmChipsetInit(void)
{
- uint32_t val = 0;
- uint16_t port;
+ u32 val = 0;
+ u16 port;
port = (PMS_IO_BASE + 0x010);
val = 0x0E00; /* 1ms */
@@ -427,7 +427,7 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb)
static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
{
- uint8_t *bar;
+ u32 bar;
msr_t msr;
device_t dev;
@@ -443,7 +443,7 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
/* write to clear diag register */
wrmsr(USB2_SB_GLD_MSR_DIAG, rdmsr(USB2_SB_GLD_MSR_DIAG));
- bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+ bar = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
/* Make HCCPARAMS writeable */
write32(bar + IPREG04, read32(bar + IPREG04) | USB_HCCPW_SET);
@@ -455,7 +455,7 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
dev = dev_find_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_CS5536_OTG, 0);
if (dev) {
- bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+ bar = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
write32(bar + UOCMUX, read32(bar + UOCMUX) & PUEN_SET);
@@ -483,8 +483,7 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
dev = dev_find_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_CS5536_UDC, 0);
if (dev) {
- bar = (uint8_t *) pci_read_config32(dev,
- PCI_BASE_ADDRESS_0);
+ bar = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
write32(bar + UDCDEVCTL,
read32(bar + UDCDEVCTL) | UDC_SD_SET);
@@ -493,8 +492,7 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb)
dev = dev_find_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_CS5536_OTG, 0);
if (dev) {
- bar = (uint8_t *) pci_read_config32(dev,
- PCI_BASE_ADDRESS_0);
+ bar = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
write32(bar + UOCCTL, read32(bar + UOCCTL) | PADEN_SET);
write32(bar + UOCCAP, read32(bar + UOCCAP) | APU_SET);
}
@@ -524,7 +522,7 @@ void chipsetinit(void)
{
device_t dev;
msr_t msr;
- uint32_t msrnum;
+ u32 msrnum;
struct southbridge_amd_cs5536_config *sb =
(struct southbridge_amd_cs5536_config *)dev->chip_info;
struct msrinit *csi;
diff --git a/src/southbridge/amd/cs5536/cs5536_early_setup.c b/src/southbridge/amd/cs5536/cs5536_early_setup.c
index fd09764212..8a553f57e0 100644
--- a/src/southbridge/amd/cs5536/cs5536_early_setup.c
+++ b/src/southbridge/amd/cs5536/cs5536_early_setup.c
@@ -32,13 +32,11 @@ static void cs5536_setup_extmsr(void)
/* forward MSR access to CS5536_GLINK_PORT_NUM to CS5536_DEV_NUM */
msr.hi = msr.lo = 0x00000000;
- if (CS5536_GLINK_PORT_NUM <= 4) {
- msr.lo = CS5536_DEV_NUM <<
- (unsigned char)((CS5536_GLINK_PORT_NUM - 1) * 8);
- } else {
- msr.hi = CS5536_DEV_NUM <<
- (unsigned char)((CS5536_GLINK_PORT_NUM - 5) * 8);
- }
+#if CS5536_GLINK_PORT_NUM <= 4
+ msr.lo = CS5536_DEV_NUM << (unsigned char)((CS5536_GLINK_PORT_NUM - 1) * 8);
+#else
+ msr.hi = CS5536_DEV_NUM << (unsigned char)((CS5536_GLINK_PORT_NUM - 5) * 8);
+#endif
wrmsr(GLPCI_ExtMSR, msr);
}
diff --git a/src/southbridge/amd/sb600/sb600_hda.c b/src/southbridge/amd/sb600/sb600_hda.c
index b0d4dfa679..95e3744db5 100644
--- a/src/southbridge/amd/sb600/sb600_hda.c
+++ b/src/southbridge/amd/sb600/sb600_hda.c
@@ -30,7 +30,7 @@
#define HDA_ICII_BUSY (1 << 0)
#define HDA_ICII_VALID (1 << 1)
-static int set_bits(u8 * port, u32 mask, u32 val)
+static int set_bits(u32 port, u32 mask, u32 val)
{
u32 dword;
int count;
@@ -59,7 +59,7 @@ static int set_bits(u8 * port, u32 mask, u32 val)
return 0;
}
-static u32 codec_detect(u8 * base)
+static u32 codec_detect(u32 base)
{
u32 dword;
@@ -172,7 +172,7 @@ static u32 find_verb(u32 viddid, u32 ** verb)
* no response would imply that the codec is non-operative
*/
-static int wait_for_ready(u8 *base)
+static int wait_for_ready(u32 base)
{
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
@@ -195,7 +195,7 @@ static int wait_for_ready(u8 *base)
* is non-operative
*/
-static int wait_for_valid(u8 *base)
+static int wait_for_valid(u32 base)
{
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
@@ -212,7 +212,7 @@ static int wait_for_valid(u8 *base)
return 1;
}
-static void codec_init(u8 * base, int addr)
+static void codec_init(u32 base, int addr)
{
u32 dword;
u32 *verb;
@@ -254,7 +254,7 @@ static void codec_init(u8 * base, int addr)
printk_debug("verb loaded!\n");
}
-static void codecs_init(u8 * base, u32 codec_mask)
+static void codecs_init(u32 base, u32 codec_mask)
{
int i;
for (i = 2; i >= 0; i--) {
@@ -267,7 +267,7 @@ static void hda_init(struct device *dev)
{
u8 byte;
u32 dword;
- u8 *base;
+ u32 base;
struct resource *res;
u32 codec_mask;
device_t sm_dev;
@@ -301,8 +301,8 @@ static void hda_init(struct device *dev)
if (!res)
return;
- base = (u8 *) ((u32)res->base);
- printk_debug("base = %p\n", base);
+ base = ((u32)res->base);
+ printk_debug("base = 0x%x\n", base);
codec_mask = codec_detect(base);
if (codec_mask) {
diff --git a/src/southbridge/amd/sb600/sb600_sata.c b/src/southbridge/amd/sb600/sb600_sata.c
index 7aea04aaf1..251f5ad2f0 100644
--- a/src/southbridge/amd/sb600/sb600_sata.c
+++ b/src/southbridge/amd/sb600/sb600_sata.c
@@ -27,7 +27,7 @@
#include <arch/io.h>
#include "sb600.h"
-int sata_drive_detect(int portnum, u16 iobar)
+static int sata_drive_detect(int portnum, u16 iobar)
{
u8 byte, byte2;
int i = 0;
@@ -59,7 +59,7 @@ static void sata_init(struct device *dev)
u8 byte;
u16 word;
u32 dword;
- u8 *sata_bar5;
+ u32 sata_bar5;
u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
int i, j;
@@ -84,7 +84,7 @@ static void sata_init(struct device *dev)
pci_write_config8(sm_dev, 0xaf, byte);
/* get base addresss */
- sata_bar5 = (u8 *) (pci_read_config32(dev, 0x24) & ~0x3FF);
+ sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF;
sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
@@ -96,7 +96,7 @@ static void sata_init(struct device *dev)
printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */
printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */
printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */
- printk_spew("sata_bar5=%p\n", sata_bar5); /* e0309000 */
+ printk_spew("sata_bar5=%x\n", sata_bar5); /* e0309000 */
/* Program the 2C to 0x43801002 */
dword = 0x43801002;
diff --git a/src/southbridge/amd/sb600/sb600_usb.c b/src/southbridge/amd/sb600/sb600_usb.c
index 7d1410f3d6..134e12560e 100644
--- a/src/southbridge/amd/sb600/sb600_usb.c
+++ b/src/southbridge/amd/sb600/sb600_usb.c
@@ -88,13 +88,13 @@ static void usb_init2(struct device *dev)
u8 byte;
u16 word;
u32 dword;
- u8 *usb2_bar0;
+ u32 usb2_bar0;
/* dword = pci_read_config32(dev, 0xf8); */
/* dword |= 40; */
/* pci_write_config32(dev, 0xf8, dword); */
- usb2_bar0 = (u8 *) (pci_read_config32(dev, 0x10) & ~0xFF);
- printk_info("usb2_bar0=%p\n", usb2_bar0);
+ usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
+ printk_info("usb2_bar0=0x%x\n", usb2_bar0);
/* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */
dword = 0x00020F00;
diff --git a/src/southbridge/amd/sb700/sb700_hda.c b/src/southbridge/amd/sb700/sb700_hda.c
index 12839a6a4b..2f55c944c7 100644
--- a/src/southbridge/amd/sb700/sb700_hda.c
+++ b/src/southbridge/amd/sb700/sb700_hda.c
@@ -30,7 +30,7 @@
#define HDA_ICII_BUSY (1 << 0)
#define HDA_ICII_VALID (1 << 1)
-static int set_bits(u8 * port, u32 mask, u32 val)
+static int set_bits(u32 port, u32 mask, u32 val)
{
u32 dword;
int count;
@@ -59,7 +59,7 @@ static int set_bits(u8 * port, u32 mask, u32 val)
return 0;
}
-static u32 codec_detect(u8 * base)
+static u32 codec_detect(u32 base)
{
u32 dword;
@@ -94,7 +94,7 @@ no_codec:
* Wait 50usec for for the codec to indicate it is ready
* no response would imply that the codec is non-operative
*/
-static int wait_for_ready(u8 *base)
+static int wait_for_ready(u32 base)
{
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
@@ -116,7 +116,7 @@ static int wait_for_ready(u8 *base)
* the previous command. No response would imply that the code
* is non-operative
*/
-static int wait_for_valid(u8 *base)
+static int wait_for_valid(u32 base)
{
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
@@ -133,7 +133,7 @@ static int wait_for_valid(u8 *base)
return 1;
}
-static void codec_init(u8 * base, int addr)
+static void codec_init(u32 base, int addr)
{
u32 dword;
@@ -153,7 +153,7 @@ static void codec_init(u8 * base, int addr)
printk_debug("%x(th) codec viddid: %08x\n", addr, dword);
}
-static void codecs_init(u8 * base, u32 codec_mask)
+static void codecs_init(u32 base, u32 codec_mask)
{
int i;
for (i = 2; i >= 0; i--) {
@@ -166,7 +166,7 @@ static void hda_init(struct device *dev)
{
u8 byte;
u32 dword;
- u8 *base;
+ u32 base;
struct resource *res;
u32 codec_mask;
device_t sm_dev;
@@ -202,8 +202,8 @@ static void hda_init(struct device *dev)
if (!res)
return;
- base = (u8 *) ((u32)res->base);
- printk_debug("base = %p\n", base);
+ base = (u32)res->base;
+ printk_debug("base = 0x%x\n", base);
codec_mask = codec_detect(base);
if (codec_mask) {
diff --git a/src/southbridge/amd/sb700/sb700_usb.c b/src/southbridge/amd/sb700/sb700_usb.c
index b567fd5e5c..63679b8847 100644
--- a/src/southbridge/amd/sb700/sb700_usb.c
+++ b/src/southbridge/amd/sb700/sb700_usb.c
@@ -34,7 +34,6 @@ static void usb_init(struct device *dev)
{
u8 byte;
u16 word;
- u32 dword;
/* 6.1 Enable OHCI0-4 and EHCI Controllers */
device_t sm_dev;
@@ -70,10 +69,8 @@ static void usb_init(struct device *dev)
static void usb_init2(struct device *dev)
{
- u8 byte;
- u16 word;
u32 dword;
- u8 *usb2_bar0;
+ u32 usb2_bar0;
device_t sm_dev;
u8 rev;
@@ -84,8 +81,8 @@ static void usb_init2(struct device *dev)
/* dword |= 40; */
/* pci_write_config32(dev, 0xf8, dword); */
- usb2_bar0 = (u8 *) (pci_read_config32(dev, 0x10) & ~0xFF);
- printk_info("usb2_bar0=%p\n", usb2_bar0);
+ usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
+ printk_info("usb2_bar0=0x%x\n", usb2_bar0);
/* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */
dword = 0x00020F00;
@@ -123,6 +120,9 @@ static void usb_init2(struct device *dev)
/* Each step below causes the linux crashes. Leave them here
* for future debugging. */
#if 0
+ u8 byte;
+ u16 word;
+
/* RPR6.16 Disable EHCI MSI support */
byte = pci_read_config8(dev, 0x50);
byte |= (1 << 6);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 01:51:00 +0000