summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/amd/db800/romstage.c6
-rw-r--r--src/mainboard/amd/dbm690t/romstage.c20
-rw-r--r--src/mainboard/amd/mahogany/romstage.c20
-rw-r--r--src/mainboard/amd/mahogany_fam10/romstage.c13
-rw-r--r--src/mainboard/amd/norwich/romstage.c6
-rw-r--r--src/mainboard/amd/pistachio/romstage.c20
-rw-r--r--src/mainboard/amd/serengeti_cheetah/romstage.c27
-rw-r--r--src/mainboard/amd/serengeti_cheetah_fam10/romstage.c11
-rw-r--r--src/mainboard/amd/tilapia_fam10/romstage.c21
-rw-r--r--src/mainboard/arima/hdama/romstage.c32
-rw-r--r--src/mainboard/artecgroup/dbe61/romstage.c8
-rw-r--r--src/mainboard/asi/mb_5blmp/romstage.c9
-rw-r--r--src/mainboard/asrock/939a785gmh/romstage.c20
-rw-r--r--src/mainboard/asus/a8n_e/romstage.c13
-rw-r--r--src/mainboard/asus/a8v-e_deluxe/romstage.c9
-rw-r--r--src/mainboard/asus/a8v-e_se/romstage.c9
-rw-r--r--src/mainboard/asus/m2v-mx_se/romstage.c9
-rw-r--r--src/mainboard/asus/m2v/romstage.c9
-rw-r--r--src/mainboard/asus/m4a785-m/romstage.c15
-rw-r--r--src/mainboard/bcom/winnet100/romstage.c9
-rw-r--r--src/mainboard/bcom/winnetp680/romstage.c10
-rw-r--r--src/mainboard/broadcom/blast/romstage.c33
-rw-r--r--src/mainboard/dell/s1850/romstage.c13
-rw-r--r--src/mainboard/digitallogic/adl855pc/romstage.c3
-rw-r--r--src/mainboard/digitallogic/msm586seg/romstage.c5
-rw-r--r--src/mainboard/digitallogic/msm800sev/romstage.c8
-rw-r--r--src/mainboard/eaglelion/5bcm/romstage.c25
-rw-r--r--src/mainboard/emulation/qemu-x86/romstage.c3
-rw-r--r--src/mainboard/getac/p470/romstage.c3
-rw-r--r--src/mainboard/gigabyte/ga_2761gxdk/romstage.c36
-rw-r--r--src/mainboard/gigabyte/m57sli/romstage.c39
-rw-r--r--src/mainboard/gigabyte/ma785gmt/romstage.c20
-rw-r--r--src/mainboard/gigabyte/ma78gm/romstage.c20
-rw-r--r--src/mainboard/hp/dl145_g1/romstage.c40
-rw-r--r--src/mainboard/hp/dl145_g3/romstage.c13
-rw-r--r--src/mainboard/hp/dl165_g6_fam10/romstage.c14
-rw-r--r--src/mainboard/ibase/mb899/romstage.c3
-rw-r--r--src/mainboard/ibm/e325/romstage.c26
-rw-r--r--src/mainboard/ibm/e326/romstage.c26
-rw-r--r--src/mainboard/iei/juki-511p/romstage.c7
-rw-r--r--src/mainboard/iei/kino-780am2-fam10/romstage.c18
-rw-r--r--src/mainboard/iei/nova4899r/romstage.c8
-rw-r--r--src/mainboard/iei/pcisa-lx-800-r10/romstage.c6
-rw-r--r--src/mainboard/intel/d945gclf/romstage.c3
-rw-r--r--src/mainboard/intel/eagleheights/romstage.c3
-rw-r--r--src/mainboard/intel/jarrell/romstage.c17
-rw-r--r--src/mainboard/intel/truxton/romstage.c3
-rw-r--r--src/mainboard/intel/xe7501devkit/romstage.c4
-rw-r--r--src/mainboard/iwill/dk8_htx/romstage.c47
-rw-r--r--src/mainboard/iwill/dk8s2/romstage.c36
-rw-r--r--src/mainboard/iwill/dk8x/romstage.c46
-rw-r--r--src/mainboard/jetway/j7f24/romstage.c8
-rw-r--r--src/mainboard/jetway/pa78vm5/romstage.c12
-rw-r--r--src/mainboard/kontron/986lcd-m/romstage.c3
-rw-r--r--src/mainboard/kontron/kt690/romstage.c26
-rw-r--r--src/mainboard/lanner/em8510/romstage.c5
-rw-r--r--src/mainboard/lippert/frontrunner/romstage.c1
-rw-r--r--src/mainboard/msi/ms7135/romstage.c21
-rw-r--r--src/mainboard/msi/ms7260/romstage.c6
-rw-r--r--src/mainboard/msi/ms9185/romstage.c34
-rw-r--r--src/mainboard/msi/ms9282/romstage.c15
-rw-r--r--src/mainboard/msi/ms9652_fam10/romstage.c17
-rw-r--r--src/mainboard/newisys/khepri/romstage.c46
-rw-r--r--src/mainboard/nvidia/l1_2pvv/romstage.c38
-rw-r--r--src/mainboard/pcengines/alix1c/romstage.c10
-rw-r--r--src/mainboard/pcengines/alix2d/romstage.c8
-rw-r--r--src/mainboard/rca/rm4100/romstage.c3
-rw-r--r--src/mainboard/roda/rk886ex/romstage.c3
-rw-r--r--src/mainboard/sunw/ultra40/romstage.c34
-rw-r--r--src/mainboard/supermicro/h8dme/romstage.c19
-rw-r--r--src/mainboard/supermicro/h8dmr/romstage.c35
-rw-r--r--src/mainboard/supermicro/h8dmr_fam10/romstage.c17
-rw-r--r--src/mainboard/supermicro/h8qme_fam10/romstage.c16
-rw-r--r--src/mainboard/supermicro/x6dai_g/romstage.c11
-rw-r--r--src/mainboard/supermicro/x6dhe_g/romstage.c19
-rw-r--r--src/mainboard/supermicro/x6dhe_g2/romstage.c19
-rw-r--r--src/mainboard/supermicro/x6dhr_ig/romstage.c11
-rw-r--r--src/mainboard/supermicro/x6dhr_ig2/romstage.c19
-rw-r--r--src/mainboard/technexion/tim5690/romstage.c20
-rw-r--r--src/mainboard/technexion/tim8690/romstage.c20
-rw-r--r--src/mainboard/televideo/tc7020/romstage.c9
-rw-r--r--src/mainboard/thomson/ip1000/romstage.c3
-rw-r--r--src/mainboard/traverse/geos/romstage.c6
-rw-r--r--src/mainboard/tyan/s2735/romstage.c9
-rw-r--r--src/mainboard/tyan/s2850/romstage.c26
-rw-r--r--src/mainboard/tyan/s2875/romstage.c26
-rw-r--r--src/mainboard/tyan/s2880/romstage.c26
-rw-r--r--src/mainboard/tyan/s2881/romstage.c40
-rw-r--r--src/mainboard/tyan/s2882/romstage.c24
-rw-r--r--src/mainboard/tyan/s2885/romstage.c33
-rw-r--r--src/mainboard/tyan/s2891/romstage.c34
-rw-r--r--src/mainboard/tyan/s2892/romstage.c24
-rw-r--r--src/mainboard/tyan/s2895/romstage.c37
-rw-r--r--src/mainboard/tyan/s2912/romstage.c39
-rw-r--r--src/mainboard/tyan/s2912_fam10/romstage.c17
-rw-r--r--src/mainboard/tyan/s4880/romstage.c24
-rw-r--r--src/mainboard/tyan/s4882/romstage.c30
-rw-r--r--src/mainboard/via/epia-cn/romstage.c14
-rw-r--r--src/mainboard/via/epia-m/romstage.c15
-rw-r--r--src/mainboard/via/epia-m700/romstage.c11
-rw-r--r--src/mainboard/via/epia-n/romstage.c14
-rw-r--r--src/mainboard/via/epia/romstage.c7
-rw-r--r--src/mainboard/via/pc2500e/romstage.c5
-rw-r--r--src/mainboard/winent/pl6064/romstage.c6
-rw-r--r--src/mainboard/wyse/s50/romstage.c1
-rw-r--r--src/northbridge/via/vx800/examples/romstage.c5
106 files changed, 462 insertions, 1343 deletions
diff --git a/src/mainboard/amd/db800/romstage.c b/src/mainboard/amd/db800/romstage.c
index 5c04d4f092..a51b64e937 100644
--- a/src/mainboard/amd/db800/romstage.c
+++ b/src/mainboard/amd/db800/romstage.c
@@ -54,11 +54,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup. */
-}
-
void main(unsigned long bist)
{
post_code(0x01);
@@ -76,7 +71,6 @@ void main(unsigned long bist)
* early MSR setup for CS5536.
*/
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- mb_gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/amd/dbm690t/romstage.c b/src/mainboard/amd/dbm690t/romstage.c
index 81926b60fa..88ecd941ef 100644
--- a/src/mainboard/amd/dbm690t/romstage.c
+++ b/src/mainboard/amd/dbm690t/romstage.c
@@ -47,17 +47,9 @@
#include "southbridge/amd/sb600/sb600_early_setup.c"
#include "northbridge/amd/amdk8/debug.c" /* After sb600_early_setup.c! */
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
-/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
@@ -88,14 +80,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
/* sb600_lpc_port80(); */
sb600_pci_port80();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
enable_rs690_dev8();
sb600_lpc_init();
@@ -135,8 +125,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
+ if ((cpuid1.edx & 0x6) == 0x6) {
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
@@ -148,7 +137,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
}
diff --git a/src/mainboard/amd/mahogany/romstage.c b/src/mainboard/amd/mahogany/romstage.c
index 97a7aceeb2..c20c0a6f7b 100644
--- a/src/mainboard/amd/mahogany/romstage.c
+++ b/src/mainboard/amd/mahogany/romstage.c
@@ -47,17 +47,9 @@
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdk8/debug.c" /* After sb700_early_setup.c! */
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
-/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
@@ -88,14 +80,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
/* sb700_lpc_port80(); */
sb700_pci_port80();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
enable_rs780_dev8();
sb700_lpc_init();
@@ -134,8 +124,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
+ if ((cpuid1.edx & 0x6) == 0x6) {
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
@@ -147,7 +136,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
}
diff --git a/src/mainboard/amd/mahogany_fam10/romstage.c b/src/mainboard/amd/mahogany_fam10/romstage.c
index 6161548535..ce4cd1b920 100644
--- a/src/mainboard/amd/mahogany_fam10/romstage.c
+++ b/src/mainboard/amd/mahogany_fam10/romstage.c
@@ -53,15 +53,11 @@ static int smbus_read_byte(u32 device, u32 address);
#include "northbridge/amd/amdfam10/debug.c"
#include <spd.h>
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
@@ -78,11 +74,9 @@ static int spd_read_byte(u32 device, u32 address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
@@ -91,7 +85,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sb700_pci_port80();
}
diff --git a/src/mainboard/amd/norwich/romstage.c b/src/mainboard/amd/norwich/romstage.c
index a9510d7543..8d108b3d89 100644
--- a/src/mainboard/amd/norwich/romstage.c
+++ b/src/mainboard/amd/norwich/romstage.c
@@ -51,11 +51,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup. */
-}
-
void main(unsigned long bist)
{
post_code(0x01);
@@ -77,7 +72,6 @@ void main(unsigned long bist)
*/
/* If debug. real setup done in chipset init via devicetree.cb. */
cs5536_setup_onchipuart(1);
- mb_gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/amd/pistachio/romstage.c b/src/mainboard/amd/pistachio/romstage.c
index 18a4d263bf..187eb207c2 100644
--- a/src/mainboard/amd/pistachio/romstage.c
+++ b/src/mainboard/amd/pistachio/romstage.c
@@ -42,17 +42,9 @@
#include "southbridge/amd/sb600/sb600_early_setup.c"
#include "northbridge/amd/amdk8/debug.c" /* After sb600_early_setup.c! */
-/* CAN'T BE REMOVED! memory bus reset hook for some broken amd k8 boards. */
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
-/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
@@ -85,14 +77,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
sb600_lpc_port80();
/* sb600_pci_port80(); */
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
enable_rs690_dev8();
sb600_lpc_init();
@@ -138,8 +128,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
+ if ((cpuid1.edx & 0x6) == 0x6) {
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
@@ -151,7 +140,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
}
diff --git a/src/mainboard/amd/serengeti_cheetah/romstage.c b/src/mainboard/amd/serengeti_cheetah/romstage.c
index d545d6bbf5..24a6525e58 100644
--- a/src/mainboard/amd/serengeti_cheetah/romstage.c
+++ b/src/mainboard/amd/serengeti_cheetah/romstage.c
@@ -33,13 +33,11 @@
static void memreset_setup(void)
{
//GPIO on amd8111 to enable MEMRST ????
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
@@ -54,6 +52,7 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl)
smbus_write_byte(SMBUS_HUB, 0x03, 0);
}
+
#if 0
static inline void change_i2c_mux(unsigned device)
{
@@ -80,7 +79,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit_f.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
@@ -117,7 +116,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
struct sys_info *sysinfo = (void*)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset;
unsigned bsp_apicid = 0;
#if CONFIG_SET_FIDVID
@@ -127,18 +125,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the rom access for 4M */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
-
-// post_code(0x32);
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -188,20 +180,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
+ if ((cpuid1.edx & 0x6) == 0x6) {
{
/* Read FIDVID_STATUS */
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
// show final fid and vid
@@ -209,13 +198,11 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
} else {
print_debug("Changing FIDVID not supported\n");
}
-
#endif
#if 1
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c
index 4b509b0e74..f7f194a7be 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c
@@ -55,8 +55,8 @@
static void memreset_setup(void)
{
//GPIO on amd8111 to enable MEMRST ????
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); // REVC_MEMRST_EN=1
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); // REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void activate_spd_rom(const struct mem_controller *ctrl)
@@ -77,9 +77,7 @@ static void activate_spd_rom(const struct mem_controller *ctrl)
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
@@ -190,8 +188,7 @@ static const u8 spd_addr[] = {
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
diff --git a/src/mainboard/amd/tilapia_fam10/romstage.c b/src/mainboard/amd/tilapia_fam10/romstage.c
index 2f6df2831d..e58fa12036 100644
--- a/src/mainboard/amd/tilapia_fam10/romstage.c
+++ b/src/mainboard/amd/tilapia_fam10/romstage.c
@@ -52,15 +52,11 @@ static int smbus_read_byte(u32 device, u32 address);
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdfam10/debug.c"
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
@@ -78,11 +74,9 @@ static int spd_read_byte(u32 device, u32 address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
@@ -91,7 +85,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sb700_pci_port80();
}
@@ -157,13 +150,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
*/
wait_all_core0_started();
- #if CONFIG_LOGICAL_CPUS==1
+#if CONFIG_LOGICAL_CPUS==1
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores();
post_code(0x37);
wait_all_other_cores_started(bsp_apicid);
- #endif
+#endif
post_code(0x38);
@@ -171,7 +164,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
rs780_early_setup();
sb700_early_setup();
- #if CONFIG_SET_FIDVID
+#if CONFIG_SET_FIDVID
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
@@ -192,7 +185,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010071);
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
- #endif
+#endif
rs780_htinit();
diff --git a/src/mainboard/arima/hdama/romstage.c b/src/mainboard/arima/hdama/romstage.c
index 599d4fb83c..5bcc249249 100644
--- a/src/mainboard/arima/hdama/romstage.c
+++ b/src/mainboard/arima/hdama/romstage.c
@@ -32,14 +32,13 @@
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
- else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ /* Set the memreset low. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Ensure the BIOS has control of the memory lines. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ } else {
+ /* Ensure the CPU has control of the memory lines. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
}
}
@@ -47,16 +46,13 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Set memreset high. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -85,22 +81,18 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
pc87360_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
diff --git a/src/mainboard/artecgroup/dbe61/romstage.c b/src/mainboard/artecgroup/dbe61/romstage.c
index 1cff578f1b..a8dc6cde59 100644
--- a/src/mainboard/artecgroup/dbe61/romstage.c
+++ b/src/mainboard/artecgroup/dbe61/romstage.c
@@ -66,11 +66,6 @@ static int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup */
-}
-
void main(unsigned long bist)
{
post_code(0x01);
@@ -96,7 +91,6 @@ void main(unsigned long bist)
msr.lo |= 0x7 << 20;
wrmsr(MDD_LEG_IO, msr);
- mb_gpio_init();
uart_init();
console_init();
@@ -109,7 +103,7 @@ void main(unsigned long bist)
sdram_initialize(1, memctrl);
- /* Dump memory configuratation */
+ /* Dump memory configuration. */
#if 0
msr = rdmsr(MC_CF07_DATA);
print_debug("MC_CF07_DATA: ");
diff --git a/src/mainboard/asi/mb_5blmp/romstage.c b/src/mainboard/asi/mb_5blmp/romstage.c
index e013fe3a6c..118ded48a3 100644
--- a/src/mainboard/asi/mb_5blmp/romstage.c
+++ b/src/mainboard/asi/mb_5blmp/romstage.c
@@ -35,20 +35,11 @@
static void main(unsigned long bist)
{
- /* Initialize the serial console. */
pc87351_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
- /* Halt if there was a built in self test failure. */
report_bist_failure(bist);
-
cs5530_enable_rom();
-
- /* Initialize RAM. */
sdram_init();
-
- /* Check whether RAM works. */
/* ram_check(0x00000000, 0x4000); */
}
-
diff --git a/src/mainboard/asrock/939a785gmh/romstage.c b/src/mainboard/asrock/939a785gmh/romstage.c
index 0bf20b6544..6ab8c83156 100644
--- a/src/mainboard/asrock/939a785gmh/romstage.c
+++ b/src/mainboard/asrock/939a785gmh/romstage.c
@@ -52,17 +52,9 @@
#define GPIO6_DEV PNP_DEV(0x2e, W83627DHG_GPIO6)
#define GPIO2345_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345)
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
-/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
@@ -140,14 +132,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
/* sb700_lpc_port80(); */
sb700_pci_port80();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
enable_rs780_dev8();
sb700_lpc_init();
@@ -187,8 +177,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
+ if ((cpuid1.edx & 0x6) == 0x6) {
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
@@ -200,7 +189,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
}
diff --git a/src/mainboard/asus/a8n_e/romstage.c b/src/mainboard/asus/a8n_e/romstage.c
index f911a9beba..9558d055b1 100644
--- a/src/mainboard/asus/a8n_e/romstage.c
+++ b/src/mainboard/asus/a8n_e/romstage.c
@@ -50,15 +50,8 @@
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- /* Nothing to do. */
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* Nothing to do. */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -108,7 +101,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
sio_setup();
}
@@ -138,7 +130,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
needs_reset |= ht_setup_chains_x();
needs_reset |= ck804_early_setup_x();
-
if (needs_reset) {
print_info("ht reset -\n");
soft_reset();
diff --git a/src/mainboard/asus/a8v-e_deluxe/romstage.c b/src/mainboard/asus/a8v-e_deluxe/romstage.c
index 393e560be5..bf096e1033 100644
--- a/src/mainboard/asus/a8v-e_deluxe/romstage.c
+++ b/src/mainboard/asus/a8v-e_deluxe/romstage.c
@@ -52,19 +52,14 @@ unsigned int get_sbdn(unsigned bus);
#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED)
#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
#include <reset.h>
void soft_reset(void)
{
diff --git a/src/mainboard/asus/a8v-e_se/romstage.c b/src/mainboard/asus/a8v-e_se/romstage.c
index 393e560be5..bf096e1033 100644
--- a/src/mainboard/asus/a8v-e_se/romstage.c
+++ b/src/mainboard/asus/a8v-e_se/romstage.c
@@ -52,19 +52,14 @@ unsigned int get_sbdn(unsigned bus);
#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED)
#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
#include <reset.h>
void soft_reset(void)
{
diff --git a/src/mainboard/asus/m2v-mx_se/romstage.c b/src/mainboard/asus/m2v-mx_se/romstage.c
index a9cc6686cb..0849c862ba 100644
--- a/src/mainboard/asus/m2v-mx_se/romstage.c
+++ b/src/mainboard/asus/m2v-mx_se/romstage.c
@@ -54,19 +54,14 @@ unsigned int get_sbdn(unsigned bus);
#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1)
#define WATCHDOG_DEV PNP_DEV(0x2e, IT8712F_GPIO)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
// defines S3_NVRAM_EARLY:
#include "southbridge/via/k8t890/k8t890_early_car.c"
#include "northbridge/amd/amdk8/amdk8.h"
diff --git a/src/mainboard/asus/m2v/romstage.c b/src/mainboard/asus/m2v/romstage.c
index 59b6c45bfc..d56ca9ce11 100644
--- a/src/mainboard/asus/m2v/romstage.c
+++ b/src/mainboard/asus/m2v/romstage.c
@@ -56,19 +56,14 @@ unsigned int get_sbdn(unsigned bus);
#define IT8712F_GPIO_BASE 0x0a20
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
// defines S3_NVRAM_EARLY:
#include "southbridge/via/k8t890/k8t890_early_car.c"
#include "northbridge/amd/amdk8/amdk8.h"
diff --git a/src/mainboard/asus/m4a785-m/romstage.c b/src/mainboard/asus/m4a785-m/romstage.c
index d59a468e35..ea93eee412 100644
--- a/src/mainboard/asus/m4a785-m/romstage.c
+++ b/src/mainboard/asus/m4a785-m/romstage.c
@@ -52,15 +52,11 @@ static int smbus_read_byte(u32 device, u32 address);
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdfam10/debug.c"
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
@@ -78,11 +74,9 @@ static int spd_read_byte(u32 device, u32 address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
@@ -91,7 +85,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sb700_pci_port80();
}
@@ -108,7 +101,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sb700_lpc_init();
it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
- it8712f_kill_watchdog(); /* disable watchdog, so it does not reset while still booting */
+ it8712f_kill_watchdog();
uart_init();
#if CONFIG_USBDEBUG
diff --git a/src/mainboard/bcom/winnet100/romstage.c b/src/mainboard/bcom/winnet100/romstage.c
index 177c44739f..8074c874e1 100644
--- a/src/mainboard/bcom/winnet100/romstage.c
+++ b/src/mainboard/bcom/winnet100/romstage.c
@@ -35,20 +35,11 @@
static void main(unsigned long bist)
{
- /* Initialize the serial console. */
pc97317_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
- /* Halt if there was a built in self test failure. */
report_bist_failure(bist);
-
cs5530_enable_rom();
-
- /* Initialize RAM. */
sdram_init();
-
- /* Check whether RAM works. */
/* ram_check(0, 640 * 1024); */
}
-
diff --git a/src/mainboard/bcom/winnetp680/romstage.c b/src/mainboard/bcom/winnetp680/romstage.c
index 32654d8ab3..802645365a 100644
--- a/src/mainboard/bcom/winnetp680/romstage.c
+++ b/src/mainboard/bcom/winnetp680/romstage.c
@@ -47,7 +47,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
static void enable_mainboard_devices(void)
{
device_t dev;
- dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
if (dev == PCI_DEV_INVALID)
die("Southbridge not found!!!\n");
@@ -85,26 +86,19 @@ void main(unsigned long bist)
pci_write_config8(ctrl.d0f0, 0x4f, 0x01);
w83697hf_set_clksel_48(SERIAL_DEV);
-
w83697hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
- print_spew("In romstage.c:main()\n");
-
enable_smbus();
smbus_fixup(&ctrl);
/* Halt if there was a built-in self test failure. */
report_bist_failure(bist);
- print_debug("Enabling mainboard devices\n");
enable_mainboard_devices();
ddr_ram_setup(&ctrl);
/* ram_check(0, 640 * 1024); */
-
- print_spew("Leaving romstage.c:main()\n");
}
-
diff --git a/src/mainboard/broadcom/blast/romstage.c b/src/mainboard/broadcom/blast/romstage.c
index ff65f3bd54..b6cbc2f21c 100644
--- a/src/mainboard/broadcom/blast/romstage.c
+++ b/src/mainboard/broadcom/blast/romstage.c
@@ -26,13 +26,8 @@
#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1)
#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC)
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset_setup(void) { }
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
@@ -60,7 +55,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
@@ -80,36 +75,23 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
bcm5785_enable_rom();
-
bcm5785_enable_lpc();
-
- //enable RTC
- pc87417_enable_dev(RTC_DEV);
+ pc87417_enable_dev(RTC_DEV); /* Enable RTC */
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
-// post_code(0x32);
pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-// post_code(0x33);
-
uart_init();
-// post_code(0x34);
-
console_init();
/* Halt if there was a built in self test failure */
@@ -166,9 +148,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#if 0
print_pci_devices();
-#endif
-
-#if 0
dump_pci_devices();
#endif
diff --git a/src/mainboard/dell/s1850/romstage.c b/src/mainboard/dell/s1850/romstage.c
index c8f8e0f66c..04a7cf3f46 100644
--- a/src/mainboard/dell/s1850/romstage.c
+++ b/src/mainboard/dell/s1850/romstage.c
@@ -67,6 +67,7 @@ static inline void waitobf(void)
while((inb(ipmicsr) & (1<<OBF)) == 0)
;
}
+
/* quite possibly the stupidest interface ever designed. */
static inline void first_cmd_byte(unsigned char byte)
{
@@ -154,12 +155,6 @@ static void main(unsigned long bist)
static const struct mem_controller mch[] = {
{
.node_id = 0,
- /*
- .f0 = PCI_DEV(0, 0x00, 0),
- .f1 = PCI_DEV(0, 0x00, 1),
- .f2 = PCI_DEV(0, 0x00, 2),
- .f3 = PCI_DEV(0, 0x00, 3),
- */
/* the wiring on this part is really messed up */
/* this is my best guess so far */
.channel0 = {DIMM0, DIMM1, DIMM2, DIMM3, },
@@ -260,9 +255,8 @@ static void main(unsigned long bist)
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
- if (memory_initialized()) {
+ if (memory_initialized())
skip_romstage();
- }
}
/* Setup the console */
mainboard_set_ich5();
@@ -311,9 +305,8 @@ static void main(unsigned long bist)
#if 0
// dump_spd_registers(&cpu[0]);
int i;
- for(i = 0; i < 1; i++) {
+ for(i = 0; i < 1; i++)
dump_spd_registers();
- }
#endif
#if 1
show_dram_slots();
diff --git a/src/mainboard/digitallogic/adl855pc/romstage.c b/src/mainboard/digitallogic/adl855pc/romstage.c
index 54f0a271e9..aec7d2ab01 100644
--- a/src/mainboard/digitallogic/adl855pc/romstage.c
+++ b/src/mainboard/digitallogic/adl855pc/romstage.c
@@ -55,13 +55,12 @@ void main(unsigned long bist)
print_pci_devices();
#endif
- if(!bios_reset_detected()) {
+ if (!bios_reset_detected()) {
enable_smbus();
#if 0
dump_spd_registers(&memctrl[0]);
dump_smbus_registers();
#endif
-
sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
}
diff --git a/src/mainboard/digitallogic/msm586seg/romstage.c b/src/mainboard/digitallogic/msm586seg/romstage.c
index d54f1463b4..4e6462d1e4 100644
--- a/src/mainboard/digitallogic/msm586seg/romstage.c
+++ b/src/mainboard/digitallogic/msm586seg/romstage.c
@@ -42,10 +42,7 @@ struct mem_controller {
int i;
};
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-// return smbus_read_byte(device, address);
-}
+static int spd_read_byte(unsigned device, unsigned address) { }
static inline void dumpmem(void){
int i, j;
diff --git a/src/mainboard/digitallogic/msm800sev/romstage.c b/src/mainboard/digitallogic/msm800sev/romstage.c
index c5a8da4564..14f04941f7 100644
--- a/src/mainboard/digitallogic/msm800sev/romstage.c
+++ b/src/mainboard/digitallogic/msm800sev/romstage.c
@@ -20,7 +20,7 @@
static inline int spd_read_byte(unsigned device, unsigned address)
{
- return smbus_read_byte(device, address);
+ return smbus_read_byte(device, address);
}
#define ManualConf 0 /* Do automatic strapped PLL config */
@@ -35,11 +35,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup */
-}
-
void main(unsigned long bist)
{
post_code(0x01);
@@ -59,7 +54,6 @@ void main(unsigned long bist)
*/
cs5536_disable_internal_uart();
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- mb_gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/eaglelion/5bcm/romstage.c b/src/mainboard/eaglelion/5bcm/romstage.c
index 9caf82ec77..3d99873bc9 100644
--- a/src/mainboard/eaglelion/5bcm/romstage.c
+++ b/src/mainboard/eaglelion/5bcm/romstage.c
@@ -19,32 +19,7 @@ static void main(unsigned long bist)
pc97317_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
- /* Halt if there was a built in self test failure */
report_bist_failure(bist);
-
cs5530_enable_rom();
-
sdram_init();
-
- /* Check all of memory */
-#if 0
- ram_check(0x00000000, msr.lo);
-#endif
-#if 0
- static const struct {
- unsigned long lo, hi;
- } check_addrs[] = {
- /* Check 16MB of memory @ 0*/
- { 0x00000000, 0x01000000 },
-#if TOTAL_CPUS > 1
- /* Check 16MB of memory @ 2GB */
- { 0x80000000, 0x81000000 },
-#endif
- };
- int i;
- for(i = 0; i < ARRAY_SIZE(check_addrs); i++) {
- ram_check(check_addrs[i].lo, check_addrs[i].hi);
- }
-#endif
}
diff --git a/src/mainboard/emulation/qemu-x86/romstage.c b/src/mainboard/emulation/qemu-x86/romstage.c
index 6f78dea968..f559c2afcc 100644
--- a/src/mainboard/emulation/qemu-x86/romstage.c
+++ b/src/mainboard/emulation/qemu-x86/romstage.c
@@ -13,7 +13,7 @@
static void main(void)
{
- /* init_timer();*/
+ /* init_timer(); */
post_code(0x05);
uart_init();
@@ -22,4 +22,3 @@ static void main(void)
//print_pci_devices();
//dump_pci_devices();
}
-
diff --git a/src/mainboard/getac/p470/romstage.c b/src/mainboard/getac/p470/romstage.c
index 788f42cb35..c875330999 100644
--- a/src/mainboard/getac/p470/romstage.c
+++ b/src/mainboard/getac/p470/romstage.c
@@ -277,9 +277,8 @@ void main(unsigned long bist)
u32 reg32;
int boot_mode = 0;
- if (bist == 0) {
+ if (bist == 0)
enable_lapic();
- }
#if 0
/* Force PCIRST# */
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c
index 70e3f96cca..4b31b545af 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c
+++ b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c
@@ -56,14 +56,8 @@
#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -119,35 +113,29 @@ static void sio_setup(void)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- // Node 0
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
- // Node 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ // Node 0
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // Node 1
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE +
CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the sis966 */
sis966_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
pnp_enter_ext_func_mode(SERIAL_DEV);
pnp_write_config(SERIAL_DEV, 0x23, 0);
@@ -194,21 +182,15 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
#endif
diff --git a/src/mainboard/gigabyte/m57sli/romstage.c b/src/mainboard/gigabyte/m57sli/romstage.c
index c9599094ab..968e384021 100644
--- a/src/mainboard/gigabyte/m57sli/romstage.c
+++ b/src/mainboard/gigabyte/m57sli/romstage.c
@@ -53,14 +53,8 @@
#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8716F_GPIO)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -111,17 +105,16 @@ static void sio_setup(void)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- // Node 0
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
- // Node 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ // Node 0
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // Node 1
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
uint8_t tmp = 0;
@@ -129,18 +122,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
pnp_enter_ext_func_mode(SERIAL_DEV);
/* The following line will set CLKIN to 24 MHz, external */
@@ -153,9 +141,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Set Serial Flash interface to 0x0820 */
pnp_write_config(GPIO_DEV, 0x64, 0x08);
pnp_write_config(GPIO_DEV, 0x65, 0x20);
- /* We can get away with not resetting the logical device because
- * it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE) will do that.
- */
}
it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
pnp_exit_ext_func_mode(SERIAL_DEV);
@@ -200,21 +185,15 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
#endif
diff --git a/src/mainboard/gigabyte/ma785gmt/romstage.c b/src/mainboard/gigabyte/ma785gmt/romstage.c
index b784474ff9..7b7f239d0e 100644
--- a/src/mainboard/gigabyte/ma785gmt/romstage.c
+++ b/src/mainboard/gigabyte/ma785gmt/romstage.c
@@ -48,15 +48,11 @@ static int smbus_read_byte(u32 device, u32 address);
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdfam10/debug.c"
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
@@ -76,8 +72,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
@@ -86,7 +81,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sb700_pci_port80();
}
@@ -153,13 +147,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
*/
wait_all_core0_started();
- #if CONFIG_LOGICAL_CPUS==1
+#if CONFIG_LOGICAL_CPUS==1
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores();
post_code(0x37);
wait_all_other_cores_started(bsp_apicid);
- #endif
+#endif
post_code(0x38);
@@ -167,7 +161,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
rs780_early_setup();
sb700_early_setup();
- #if CONFIG_SET_FIDVID
+#if CONFIG_SET_FIDVID
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
@@ -188,7 +182,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010071);
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
- #endif
+#endif
rs780_htinit();
diff --git a/src/mainboard/gigabyte/ma78gm/romstage.c b/src/mainboard/gigabyte/ma78gm/romstage.c
index 116229605e..9a753b9201 100644
--- a/src/mainboard/gigabyte/ma78gm/romstage.c
+++ b/src/mainboard/gigabyte/ma78gm/romstage.c
@@ -52,15 +52,11 @@ static int smbus_read_byte(u32 device, u32 address);
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdfam10/debug.c"
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
@@ -80,8 +76,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
@@ -90,7 +85,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sb700_pci_port80();
}
@@ -155,13 +149,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
*/
wait_all_core0_started();
- #if CONFIG_LOGICAL_CPUS==1
+#if CONFIG_LOGICAL_CPUS==1
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores();
post_code(0x37);
wait_all_other_cores_started(bsp_apicid);
- #endif
+#endif
post_code(0x38);
@@ -169,7 +163,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
rs780_early_setup();
sb700_early_setup();
- #if CONFIG_SET_FIDVID
+#if CONFIG_SET_FIDVID
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
@@ -190,7 +184,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010071);
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
- #endif
+#endif
rs780_htinit();
diff --git a/src/mainboard/hp/dl145_g1/romstage.c b/src/mainboard/hp/dl145_g1/romstage.c
index bce716cb1a..5352ccc48c 100644
--- a/src/mainboard/hp/dl145_g1/romstage.c
+++ b/src/mainboard/hp/dl145_g1/romstage.c
@@ -27,13 +27,13 @@
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ /* Set the memreset low. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
+ /* Ensure the BIOS has control of the memory lines. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
} else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ /* Ensure the CPU has control of the memory lines. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
}
@@ -41,8 +41,8 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
+ /* Set memreset high. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
udelay(90);
}
}
@@ -97,37 +97,29 @@ static inline int spd_read_byte(unsigned device, unsigned address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- //first node
- RC0|DIMM0, RC0|DIMM2, 0, 0,
- RC0|DIMM1, RC0|DIMM3, 0, 0,
+ //first node
+ RC0|DIMM0, RC0|DIMM2, 0, 0,
+ RC0|DIMM1, RC0|DIMM3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
- //second node
- RC1|DIMM0, RC1|DIMM2, 0, 0,
- RC1|DIMM1, RC1|DIMM3, 0, 0,
+ //second node
+ RC1|DIMM0, RC1|DIMM2, 0, 0,
+ RC1|DIMM1, RC1|DIMM3, 0, 0,
#endif
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the amd8111 */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
-
-// post_code(0x32);
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
diff --git a/src/mainboard/hp/dl145_g3/romstage.c b/src/mainboard/hp/dl145_g3/romstage.c
index ce6fd54f8f..ff16b3f8bb 100644
--- a/src/mainboard/hp/dl145_g3/romstage.c
+++ b/src/mainboard/hp/dl145_g3/romstage.c
@@ -59,9 +59,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1)
#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
@@ -133,7 +131,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
// first node
DIMM0, DIMM2, 0, 0,
DIMM1, DIMM3, 0, 0,
-
// second node
DIMM4, DIMM6, 0, 0,
DIMM5, DIMM7, 0, 0,
@@ -141,24 +138,20 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
bcm5785_enable_rom();
bcm5785_enable_lpc();
- //enable RTC
- pc87417_enable_dev(RTC_DEV);
+ pc87417_enable_dev(RTC_DEV); /* Enable RTC */
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
diff --git a/src/mainboard/hp/dl165_g6_fam10/romstage.c b/src/mainboard/hp/dl165_g6_fam10/romstage.c
index d629a7743d..f167b925ac 100644
--- a/src/mainboard/hp/dl165_g6_fam10/romstage.c
+++ b/src/mainboard/hp/dl165_g6_fam10/romstage.c
@@ -100,30 +100,24 @@ static const u8 spd_addr[] = {
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
- /* Nothing special needs to be done to find bus 0 */
+ /* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
- /* Setup the rom access for 4M */
bcm5785_enable_rom();
bcm5785_enable_lpc();
- //enable RTC
- pc87417_enable_dev(RTC_DEV);
+ pc87417_enable_dev(RTC_DEV); /* Enable RTC */
}
post_code(0x30);
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
diff --git a/src/mainboard/ibase/mb899/romstage.c b/src/mainboard/ibase/mb899/romstage.c
index cc82c4ed4e..b9d2f99f62 100644
--- a/src/mainboard/ibase/mb899/romstage.c
+++ b/src/mainboard/ibase/mb899/romstage.c
@@ -239,9 +239,8 @@ void main(unsigned long bist)
u32 reg32;
int boot_mode = 0;
- if (bist == 0) {
+ if (bist == 0)
enable_lapic();
- }
ich7_enable_lpc();
early_superio_config_w83627ehg();
diff --git a/src/mainboard/ibm/e325/romstage.c b/src/mainboard/ibm/e325/romstage.c
index 56777e6274..49dce1412b 100644
--- a/src/mainboard/ibm/e325/romstage.c
+++ b/src/mainboard/ibm/e325/romstage.c
@@ -29,13 +29,13 @@
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ /* Set the memreset low. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
+ /* Ensure the BIOS has control of the memory lines. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
} else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ /* Ensure the CPU has control of the memory lines. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
}
@@ -43,16 +43,13 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
+ /* Set memreset high. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -99,15 +96,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
init_cpus(cpu_init_detectedx);
- }
pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
diff --git a/src/mainboard/ibm/e326/romstage.c b/src/mainboard/ibm/e326/romstage.c
index f9a706d718..48bfcc5f83 100644
--- a/src/mainboard/ibm/e326/romstage.c
+++ b/src/mainboard/ibm/e326/romstage.c
@@ -29,13 +29,13 @@
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ /* Set the memreset low. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
+ /* Ensure the BIOS has control of the memory lines. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
} else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ /* Ensure the CPU has control of the memory lines. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
}
@@ -43,16 +43,13 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
+ /* Set memreset high. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -99,15 +96,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
init_cpus(cpu_init_detectedx);
- }
pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
diff --git a/src/mainboard/iei/juki-511p/romstage.c b/src/mainboard/iei/juki-511p/romstage.c
index 96e027872a..6bde6756c4 100644
--- a/src/mainboard/iei/juki-511p/romstage.c
+++ b/src/mainboard/iei/juki-511p/romstage.c
@@ -36,12 +36,9 @@
static void main(unsigned long bist)
{
- /* Initialize the serial console. */
w83977f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
- /* Halt if there was a built in self test failure. */
report_bist_failure(bist);
/* Disable Watchdog Timer. */
@@ -49,10 +46,6 @@ static void main(unsigned long bist)
inb(0x843);
cs5530_enable_rom();
-
- /* Initialize RAM. */
sdram_init();
-
- /* Check RAM. */
/* ram_check(0x00000000, 640 * 1024); */
}
diff --git a/src/mainboard/iei/kino-780am2-fam10/romstage.c b/src/mainboard/iei/kino-780am2-fam10/romstage.c
index eb88647384..5afa651e05 100644
--- a/src/mainboard/iei/kino-780am2-fam10/romstage.c
+++ b/src/mainboard/iei/kino-780am2-fam10/romstage.c
@@ -25,9 +25,6 @@
#define FAM10_SCAN_PCI_BUS 0
#define FAM10_ALLOCATE_IO_RANGE 0
-/* UART address and device number */
-#define SERIAL_DEV PNP_DEV(0x2e, F71859_SP1)
-
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
@@ -55,15 +52,13 @@ static int smbus_read_byte(u32 device, u32 address);
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdfam10/debug.c"
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+#define SERIAL_DEV PNP_DEV(0x2e, F71859_SP1)
+
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static int spd_read_byte(u32 device, u32 address)
{
- int result;
- result = smbus_read_byte(device, address);
- return result;
+ return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdfam10/amdfam10.h"
@@ -81,11 +76,9 @@ static int spd_read_byte(u32 device, u32 address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
@@ -94,7 +87,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sb700_pci_port80();
}
diff --git a/src/mainboard/iei/nova4899r/romstage.c b/src/mainboard/iei/nova4899r/romstage.c
index 72f35aae3f..0900f4ba3e 100644
--- a/src/mainboard/iei/nova4899r/romstage.c
+++ b/src/mainboard/iei/nova4899r/romstage.c
@@ -36,19 +36,11 @@
static void main(unsigned long bist)
{
- /* Initialize the serial console. */
w83977tf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
- /* Halt if there was a built in self test failure. */
report_bist_failure(bist);
-
cs5530_enable_rom();
-
- /* Initialize RAM. */
sdram_init();
-
- /* Check RAM. */
/* ram_check(0x00000000, 640 * 1024); */
}
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
index e889eed09c..4e27f9bbbd 100644
--- a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
+++ b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
@@ -58,11 +58,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup. */
-}
-
void main(unsigned long bist)
{
post_code(0x01);
@@ -80,7 +75,6 @@ void main(unsigned long bist)
* early MSR setup for CS5536.
*/
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- mb_gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/intel/d945gclf/romstage.c b/src/mainboard/intel/d945gclf/romstage.c
index 8d155d1662..8b79f2dc57 100644
--- a/src/mainboard/intel/d945gclf/romstage.c
+++ b/src/mainboard/intel/d945gclf/romstage.c
@@ -201,9 +201,8 @@ void main(unsigned long bist)
u32 reg32;
int boot_mode = 0;
- if (bist == 0) {
+ if (bist == 0)
enable_lapic();
- }
ich7_enable_lpc();
early_superio_config_lpc47m15x();
diff --git a/src/mainboard/intel/eagleheights/romstage.c b/src/mainboard/intel/eagleheights/romstage.c
index 82064a418c..8f8cd0f00f 100644
--- a/src/mainboard/intel/eagleheights/romstage.c
+++ b/src/mainboard/intel/eagleheights/romstage.c
@@ -138,9 +138,8 @@ void main(unsigned long bist)
}
};
- if (bist == 0) {
+ if (bist == 0)
enable_lapic();
- }
/* Setup the console */
i3100_enable_superio();
diff --git a/src/mainboard/intel/jarrell/romstage.c b/src/mainboard/intel/jarrell/romstage.c
index 8b39ce5843..5d33b10633 100644
--- a/src/mainboard/intel/jarrell/romstage.c
+++ b/src/mainboard/intel/jarrell/romstage.c
@@ -45,12 +45,6 @@ static void main(unsigned long bist)
static const struct mem_controller mch[] = {
{
.node_id = 0,
- /*
- .f0 = PCI_DEV(0, 0x00, 0),
- .f1 = PCI_DEV(0, 0x00, 1),
- .f2 = PCI_DEV(0, 0x00, 2),
- .f3 = PCI_DEV(0, 0x00, 3),
- */
.channel0 = { DIMM2, DIMM1, DIMM0, 0 },
.channel1 = { DIMM6, DIMM5, DIMM4, 0 },
}
@@ -59,9 +53,8 @@ static void main(unsigned long bist)
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
- if (memory_initialized()) {
+ if (memory_initialized())
skip_romstage();
- }
}
/* Setup the console */
@@ -86,9 +79,8 @@ static void main(unsigned long bist)
/* config LPC decode for flash memory access */
device_t dev;
dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
- if (dev == PCI_DEV_INVALID) {
+ if (dev == PCI_DEV_INVALID)
die("Missing ich5?");
- }
pci_write_config32(dev, 0xe8, 0x00000000);
pci_write_config8(dev, 0xf0, 0x00);
@@ -99,9 +91,8 @@ static void main(unsigned long bist)
#if 0
// dump_spd_registers(&cpu[0]);
int i;
- for(i = 0; i < 1; i++) {
+ for(i = 0; i < 1; i++)
dump_spd_registers();
- }
#endif
disable_watchdogs();
power_down_reset_check();
@@ -111,8 +102,6 @@ static void main(unsigned long bist)
ich5_watchdog_on();
#if 0
dump_pci_devices();
-#endif
-#if 0
dump_pci_device(PCI_DEV(0, 0x00, 0));
dump_bar14(PCI_DEV(0, 0x00, 0));
#endif
diff --git a/src/mainboard/intel/truxton/romstage.c b/src/mainboard/intel/truxton/romstage.c
index cd7d38de0e..c75ce3e732 100644
--- a/src/mainboard/intel/truxton/romstage.c
+++ b/src/mainboard/intel/truxton/romstage.c
@@ -68,9 +68,8 @@ static void main(unsigned long bist)
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
- if (memory_initialized()) {
+ if (memory_initialized())
skip_romstage();
- }
}
/* Set up the console */
diff --git a/src/mainboard/intel/xe7501devkit/romstage.c b/src/mainboard/intel/xe7501devkit/romstage.c
index f270427175..f393c301a3 100644
--- a/src/mainboard/intel/xe7501devkit/romstage.c
+++ b/src/mainboard/intel/xe7501devkit/romstage.c
@@ -46,15 +46,13 @@ static void main(unsigned long bist)
},
};
- if (bist == 0)
- {
+ if (bist == 0) {
// Skip this if there was a built in self test failure
early_mtrr_init();
enable_lapic();
}
// Get the serial port running and print a welcome banner
-
lpc47b272_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
diff --git a/src/mainboard/iwill/dk8_htx/romstage.c b/src/mainboard/iwill/dk8_htx/romstage.c
index fdc7199c70..75584f3090 100644
--- a/src/mainboard/iwill/dk8_htx/romstage.c
+++ b/src/mainboard/iwill/dk8_htx/romstage.c
@@ -35,13 +35,13 @@
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ /* Set the memreset low. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Ensure the BIOS has control of the memory lines. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
} else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ /* Ensure the CPU has control of the memory lines. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
}
}
@@ -50,14 +50,12 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
if (is_cpu_pre_c0()) {
udelay(800);
/* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -69,7 +67,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
@@ -81,34 +79,28 @@ static inline int spd_read_byte(unsigned device, unsigned address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
- // first node
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
-
- // second node
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ // first node
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // second node
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the rom access for 4M */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -143,26 +135,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if CONFIG_SET_FIDVID
-
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
#endif
diff --git a/src/mainboard/iwill/dk8s2/romstage.c b/src/mainboard/iwill/dk8s2/romstage.c
index 45d2e6c10d..70339e82be 100644
--- a/src/mainboard/iwill/dk8s2/romstage.c
+++ b/src/mainboard/iwill/dk8s2/romstage.c
@@ -35,13 +35,13 @@
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ /* Set the memreset low. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Ensure the BIOS has control of the memory lines. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
} else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ /* Ensure the CPU has control of the memory lines. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
}
}
@@ -49,15 +49,13 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Set memreset high. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -69,7 +67,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit.c"
#include "lib/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c" /* tyan does not want the default */
+#include "northbridge/amd/amdk8/resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
@@ -92,23 +90,18 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the rom access for 4M */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -143,26 +136,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if CONFIG_SET_FIDVID
-
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
#endif
diff --git a/src/mainboard/iwill/dk8x/romstage.c b/src/mainboard/iwill/dk8x/romstage.c
index 45d2e6c10d..b8169b2b94 100644
--- a/src/mainboard/iwill/dk8x/romstage.c
+++ b/src/mainboard/iwill/dk8x/romstage.c
@@ -35,13 +35,13 @@
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ /* Set the memreset low. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Ensure the BIOS has control of the memory lines. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
} else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ /* Ensure the CPU has control of the memory lines. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
}
}
@@ -49,15 +49,13 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Set memreset high. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -69,7 +67,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit.c"
#include "lib/generic_sdram.c"
-#include "northbridge/amd/amdk8/resourcemap.c" /* tyan does not want the default */
+#include "northbridge/amd/amdk8/resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
@@ -81,34 +79,29 @@ static inline int spd_read_byte(unsigned device, unsigned address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr[] = {
- // first node
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
+ // first node
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
// second node
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the rom access for 4M */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -143,26 +136,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if CONFIG_SET_FIDVID
-
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
#endif
diff --git a/src/mainboard/jetway/j7f24/romstage.c b/src/mainboard/jetway/j7f24/romstage.c
index 6cfaaa4173..daacd1bebd 100644
--- a/src/mainboard/jetway/j7f24/romstage.c
+++ b/src/mainboard/jetway/j7f24/romstage.c
@@ -53,7 +53,8 @@ static void enable_mainboard_devices(void)
{
device_t dev;
- dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
if (dev == PCI_DEV_INVALID)
die("Southbridge not found!!!\n");
@@ -94,20 +95,15 @@ void main(unsigned long bist)
uart_init();
console_init();
- print_spew("In romstage.c:main()\n");
-
enable_smbus();
smbus_fixup(&ctrl);
/* Halt if there was a built-in self test failure. */
report_bist_failure(bist);
- print_debug("Enabling mainboard devices\n");
enable_mainboard_devices();
ddr_ram_setup(&ctrl);
/* ram_check(0, 640 * 1024); */
-
- print_spew("Leaving romstage.c:main()\n");
}
diff --git a/src/mainboard/jetway/pa78vm5/romstage.c b/src/mainboard/jetway/pa78vm5/romstage.c
index a3706ef7fe..990c878987 100644
--- a/src/mainboard/jetway/pa78vm5/romstage.c
+++ b/src/mainboard/jetway/pa78vm5/romstage.c
@@ -59,9 +59,7 @@ static int smbus_read_byte(u32 device, u32 address);
#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP1)
#endif
-static void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static int spd_read_byte(u32 device, u32 address)
{
@@ -85,8 +83,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
@@ -95,7 +92,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sb700_pci_port80();
}
@@ -175,7 +171,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
rs780_early_setup();
sb700_early_setup();
- #if CONFIG_SET_FIDVID
+#if CONFIG_SET_FIDVID
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
@@ -196,7 +192,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010071);
printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
- #endif
+#endif
rs780_htinit();
diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c
index 20d80ee648..59d54d260f 100644
--- a/src/mainboard/kontron/986lcd-m/romstage.c
+++ b/src/mainboard/kontron/986lcd-m/romstage.c
@@ -328,9 +328,8 @@ void main(unsigned long bist)
u32 reg32;
int boot_mode = 0;
- if (bist == 0) {
+ if (bist == 0)
enable_lapic();
- }
/* Force PCIRST# */
pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
diff --git a/src/mainboard/kontron/kt690/romstage.c b/src/mainboard/kontron/kt690/romstage.c
index d3586f225d..16c8b0b455 100644
--- a/src/mainboard/kontron/kt690/romstage.c
+++ b/src/mainboard/kontron/kt690/romstage.c
@@ -48,17 +48,9 @@
#include "southbridge/amd/rs690/rs690_early_setup.c"
#include "southbridge/amd/sb600/sb600_early_setup.c"
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
-/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
@@ -76,9 +68,10 @@ static inline int spd_read_byte(u32 device, u32 address)
#include "cpu/amd/model_fxx/fidvid.c"
#include "northbridge/amd/amdk8/early_ht.c"
+#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
+
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
- device_t dev;
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
@@ -90,20 +83,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
/* sb600_lpc_port80(); */
sb600_pci_port80();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
enable_rs690_dev8();
sb600_lpc_init();
- dev=PNP_DEV(0x2e, W83627DHG_SP1);
- w83627dhg_enable_serial(dev, CONFIG_TTYS0_BASE);
+ w83627dhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
#if CONFIG_USBDEBUG
@@ -137,8 +127,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
+ if ((cpuid1.edx & 0x6) == 0x6) {
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
@@ -150,7 +139,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
printk(BIOS_SPEW, "... because cpuid returned %08x\n", cpuid1.edx);
diff --git a/src/mainboard/lanner/em8510/romstage.c b/src/mainboard/lanner/em8510/romstage.c
index d763a87bc7..d3e288a661 100644
--- a/src/mainboard/lanner/em8510/romstage.c
+++ b/src/mainboard/lanner/em8510/romstage.c
@@ -77,15 +77,13 @@ void main(unsigned long bist)
print_pci_devices();
#endif
- if(!bios_reset_detected()) {
+ if (!bios_reset_detected()) {
enable_smbus();
#if 1
dump_spd_registers(&memctrl[0]);
dump_smbus_registers();
#endif
-
sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
-
}
#if 0
@@ -100,4 +98,3 @@ void main(unsigned long bist)
ram_check(0x80000000, 0x81000000);
#endif
}
-
diff --git a/src/mainboard/lippert/frontrunner/romstage.c b/src/mainboard/lippert/frontrunner/romstage.c
index 5578fd253a..1d63e49243 100644
--- a/src/mainboard/lippert/frontrunner/romstage.c
+++ b/src/mainboard/lippert/frontrunner/romstage.c
@@ -77,6 +77,7 @@ void main(unsigned long bist)
{.channel0 = {DIMM0, DIMM1}}
};
unsigned char temp;
+
SystemPreInit();
msr_init();
diff --git a/src/mainboard/msi/ms7135/romstage.c b/src/mainboard/msi/ms7135/romstage.c
index 74e966d148..c804b6c9fe 100644
--- a/src/mainboard/msi/ms7135/romstage.c
+++ b/src/mainboard/msi/ms7135/romstage.c
@@ -50,15 +50,8 @@
#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- /* FIXME: Nothing to do? */
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* FIXME: Nothing to do? */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -100,22 +93,18 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
sio_setup();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
w83627thg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -138,9 +127,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#endif
needs_reset |= ht_setup_chains_x();
-
needs_reset |= ck804_early_setup_x();
-
if (needs_reset) {
print_info("ht reset -\n");
soft_reset();
diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c
index 329c679dee..a3ea7d7f9f 100644
--- a/src/mainboard/msi/ms7260/romstage.c
+++ b/src/mainboard/msi/ms7260/romstage.c
@@ -117,7 +117,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
@@ -125,10 +124,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0. */
/* Allow the HT devices to be found. */
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the MCP55. */
mcp55_enable_rom();
}
@@ -186,11 +182,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
print_debug_hex32(msr.lo);
print_debug("\n");
}
-
enable_fid_change();
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
init_fidvid_bsp(bsp_apicid);
-
{
msr_t msr = rdmsr(0xc0010042);
print_debug("end msr fid, vid ");
diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c
index 5c52dd29dd..ffe728d3e5 100644
--- a/src/mainboard/msi/ms9185/romstage.c
+++ b/src/mainboard/msi/ms9185/romstage.c
@@ -52,9 +52,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1)
#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
@@ -85,7 +83,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit_f.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* msi does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
@@ -116,24 +114,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
bcm5785_enable_rom();
-
bcm5785_enable_lpc();
-
//enable RTC
pc87417_enable_dev(RTC_DEV);
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
-
-// post_code(0x32);
- pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
@@ -142,11 +133,11 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
+ printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
setup_ms9185_resource_map();
#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 0));
+ dump_pci_device(PCI_DEV(0, 0x18, 0));
dump_pci_device(PCI_DEV(0, 0x19, 0));
#endif
@@ -166,7 +157,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#endif
/* it will set up chains and store link pair for optimization later */
- ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+ ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
bcm5785_early_setup();
@@ -177,26 +168,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#endif
#if CONFIG_SET_FIDVID
-
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
-
- enable_fid_change();
-
- enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
+ enable_fid_change();
+ enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
#endif
diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c
index dc9d946aed..5036f17707 100644
--- a/src/mainboard/msi/ms9282/romstage.c
+++ b/src/mainboard/msi/ms9282/romstage.c
@@ -49,9 +49,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
@@ -59,7 +57,7 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl)
#define SMBUS_SWITCH2 0x72
unsigned device=(ctrl->channel0[0])>>8;
smbus_send_byte(SMBUS_SWITCH1, device);
- smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
+ smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
}
#if 0
@@ -68,7 +66,7 @@ static inline void change_i2c_mux(unsigned device)
#define SMBUS_SWITCH1 0x70
#define SMBUS_SWITHC2 0x72
smbus_send_byte(SMBUS_SWITCH1, device & 0x0f);
- smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
+ smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f);
}
#endif
@@ -82,7 +80,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/raminit_f.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* msi does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
@@ -138,12 +136,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
@@ -177,7 +171,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
needs_reset |= mcp55_early_setup_x();
-
if (needs_reset) {
print_info("ht reset -\n");
soft_reset();
diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c
index 8b297e0856..49b3e177c3 100644
--- a/src/mainboard/msi/ms9652_fam10/romstage.c
+++ b/src/mainboard/msi/ms9652_fam10/romstage.c
@@ -51,10 +51,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -110,31 +107,23 @@ static const u8 spd_addr[] = {
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
- u32 bsp_apicid = 0;
- u32 val;
+ u32 bsp_apicid = 0, val, wants_reset;
u8 reg;
- u32 wants_reset;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
post_code(0x30);
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
post_code(0x32);
diff --git a/src/mainboard/newisys/khepri/romstage.c b/src/mainboard/newisys/khepri/romstage.c
index 11e1ecfe3e..bd62cad9cc 100644
--- a/src/mainboard/newisys/khepri/romstage.c
+++ b/src/mainboard/newisys/khepri/romstage.c
@@ -35,14 +35,13 @@
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
- else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ /* Set the memreset low. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Ensure the BIOS has control of the memory lines. */
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ } else {
+ /* Ensure the CPU has control of the memory lines. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
}
}
@@ -50,16 +49,13 @@ static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
+ /* Set memreset high. */
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -69,7 +65,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* newisys khepri does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
@@ -79,35 +75,27 @@ static inline int spd_read_byte(unsigned device, unsigned address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
#endif
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the amd8111 */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
-
-// post_code(0x32);
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
diff --git a/src/mainboard/nvidia/l1_2pvv/romstage.c b/src/mainboard/nvidia/l1_2pvv/romstage.c
index 8741071c97..69f3eb1fe9 100644
--- a/src/mainboard/nvidia/l1_2pvv/romstage.c
+++ b/src/mainboard/nvidia/l1_2pvv/romstage.c
@@ -53,14 +53,8 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -112,35 +106,29 @@ static void sio_setup(void)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- // Node 0
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
- // Node 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ // Node 0
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // Node 1
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
pnp_enter_ext_func_mode(SERIAL_DEV);
pnp_write_config(SERIAL_DEV, 0x24, 0);
@@ -183,28 +171,22 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if CONFIG_SET_FIDVID
-
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
#endif
+
init_timer(); /* Need to use TMICT to synconize FID/VID. */
needs_reset |= optimize_link_coherent_ht();
diff --git a/src/mainboard/pcengines/alix1c/romstage.c b/src/mainboard/pcengines/alix1c/romstage.c
index ca87afb73c..209485ec64 100644
--- a/src/mainboard/pcengines/alix1c/romstage.c
+++ b/src/mainboard/pcengines/alix1c/romstage.c
@@ -36,9 +36,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
/* The ALIX1.C has no SMBus; the setup is hard-wired. */
-static void cs5536_enable_smbus(void)
-{
-}
+static void cs5536_enable_smbus(void) { }
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
@@ -114,11 +112,6 @@ static u8 spd_read_byte(u8 device, u8 address)
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-/** Early mainboard specific GPIO setup. */
-static void mb_gpio_init(void)
-{
-}
-
void main(unsigned long bist)
{
static const struct mem_controller memctrl[] = {
@@ -137,7 +130,6 @@ void main(unsigned long bist)
*/
cs5536_disable_internal_uart();
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- mb_gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/pcengines/alix2d/romstage.c b/src/mainboard/pcengines/alix2d/romstage.c
index fd2298ce88..9fd001ca17 100644
--- a/src/mainboard/pcengines/alix2d/romstage.c
+++ b/src/mainboard/pcengines/alix2d/romstage.c
@@ -36,9 +36,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
/* The ALIX.2D has no SMBus; the setup is hard-wired. */
-static void cs5536_enable_smbus(void)
-{
-}
+static void cs5536_enable_smbus(void) { }
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
@@ -128,13 +126,13 @@ static void mb_gpio_init(void)
* Ugly workaround: $ wrmsr 0x5140000C 0xf00100006100
* This resets the GPIO I/O space to 0x6100.
* This may break other things, though.
- */
+ */
outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE);
outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE);
outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE);
/* outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_VALUE); */ /* Led 1 enabled */
- outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 2 disabled */
+ outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 2 disabled */
outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 3 disabled */
}
diff --git a/src/mainboard/rca/rm4100/romstage.c b/src/mainboard/rca/rm4100/romstage.c
index c974ebeedd..65d6bdea69 100644
--- a/src/mainboard/rca/rm4100/romstage.c
+++ b/src/mainboard/rca/rm4100/romstage.c
@@ -99,9 +99,8 @@ static void mb_early_setup(void)
void main(unsigned long bist)
{
if (bist == 0) {
- if (memory_initialized()) {
+ if (memory_initialized())
hard_reset();
- }
}
/* Set southbridge and superio gpios */
diff --git a/src/mainboard/roda/rk886ex/romstage.c b/src/mainboard/roda/rk886ex/romstage.c
index aef61671da..109d2e8102 100644
--- a/src/mainboard/roda/rk886ex/romstage.c
+++ b/src/mainboard/roda/rk886ex/romstage.c
@@ -250,9 +250,8 @@ void main(unsigned long bist)
u32 reg32;
int boot_mode = 0;
- if (bist == 0) {
+ if (bist == 0)
enable_lapic();
- }
/* Force PCIRST# */
pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
diff --git a/src/mainboard/sunw/ultra40/romstage.c b/src/mainboard/sunw/ultra40/romstage.c
index 2fa3392927..ceac91ddfb 100644
--- a/src/mainboard/sunw/ultra40/romstage.c
+++ b/src/mainboard/sunw/ultra40/romstage.c
@@ -28,9 +28,7 @@
#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
#define SUPERIO_GPIO_IO_BASE 0x400
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
#ifdef ENABLE_ONBOARD_SCSI
static void sio_gpio_setup(void)
@@ -44,10 +42,7 @@ static void sio_gpio_setup(void)
}
#endif
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static inline void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -57,7 +52,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
@@ -101,32 +96,27 @@ static void sio_setup(void)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- // Node 0
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
- // Node 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ // Node 0
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // Node 1
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -147,9 +137,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#endif
needs_reset |= ht_setup_chains_x();
-
needs_reset |= ck804_early_setup_x();
-
if (needs_reset) {
print_info("ht reset -\n");
soft_reset();
diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c
index de3bc2c35f..ac3ee68857 100644
--- a/src/mainboard/supermicro/h8dme/romstage.c
+++ b/src/mainboard/supermicro/h8dme/romstage.c
@@ -49,9 +49,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
static inline void dump_smbus_registers(void)
{
@@ -183,25 +181,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
pnp_enter_ext_func_mode(SERIAL_DEV);
pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6));
@@ -243,7 +235,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if CONFIG_SET_FIDVID
-
{
msr_t msr;
msr = rdmsr(0xc0010042);
@@ -251,15 +242,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
print_debug_hex32(msr.hi);
print_debug_hex32(msr.lo);
print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
@@ -268,7 +254,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
print_debug_hex32(msr.hi);
print_debug_hex32(msr.lo);
print_debug("\n");
-
}
#endif
diff --git a/src/mainboard/supermicro/h8dmr/romstage.c b/src/mainboard/supermicro/h8dmr/romstage.c
index 573f69eb30..d41067a2d2 100644
--- a/src/mainboard/supermicro/h8dmr/romstage.c
+++ b/src/mainboard/supermicro/h8dmr/romstage.c
@@ -52,14 +52,8 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -85,6 +79,7 @@ static void sio_setup(void)
{
uint32_t dword;
uint8_t byte;
+
enable_smbus();
// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */
smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */
@@ -105,35 +100,29 @@ static void sio_setup(void)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- // Node 0
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
- // Node 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ // Node 0
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // Node 1
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
pnp_enter_ext_func_mode(SERIAL_DEV);
pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6));
@@ -177,13 +166,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid %08x, %08x\n", msr.hi, msr.lo);
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c
index 174a6cefcf..61551a718c 100644
--- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c
+++ b/src/mainboard/supermicro/h8dmr_fam10/romstage.c
@@ -51,10 +51,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -111,30 +108,22 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE +
CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
- u32 bsp_apicid = 0;
- u32 val;
- u32 wants_reset;
+ u32 bsp_apicid = 0, val, wants_reset;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
post_code(0x30);
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
post_code(0x32);
diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c
index e77b139745..dac57f977b 100644
--- a/src/mainboard/supermicro/h8qme_fam10/romstage.c
+++ b/src/mainboard/supermicro/h8qme_fam10/romstage.c
@@ -117,6 +117,7 @@ static const u8 spd_addr[] = {
#define GPIO1_DEV PNP_DEV(0x2e, W83627HF_GAME_MIDI_GPIO1)
#define GPIO2_DEV PNP_DEV(0x2e, W83627HF_GPIO2)
#define GPIO3_DEV PNP_DEV(0x2e, W83627HF_GPIO3)
+
static void write_GPIO(void)
{
pnp_enter_ext_func_mode(GPIO1_DEV);
@@ -156,31 +157,24 @@ static void write_GPIO(void)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
- struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
- u32 bsp_apicid = 0;
- u32 val;
- u32 wants_reset;
+ struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+ u32 bsp_apicid = 0, val, wants_reset;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
post_code(0x30);
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
post_code(0x32);
diff --git a/src/mainboard/supermicro/x6dai_g/romstage.c b/src/mainboard/supermicro/x6dai_g/romstage.c
index b95bbc9ebf..2873d8af99 100644
--- a/src/mainboard/supermicro/x6dai_g/romstage.c
+++ b/src/mainboard/supermicro/x6dai_g/romstage.c
@@ -60,9 +60,8 @@ static void main(unsigned long bist)
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
- if (memory_initialized()) {
+ if (memory_initialized())
skip_romstage();
- }
}
/* Setup the console */
@@ -77,16 +76,13 @@ static void main(unsigned long bist)
/* config LPC decode for flash memory access */
device_t dev;
dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0);
- if (dev == PCI_DEV_INVALID) {
+ if (dev == PCI_DEV_INVALID)
die("Missing 6300ESB?");
- }
pci_write_config32(dev, 0xe8, 0x00000000);
pci_write_config8(dev, 0xf0, 0x00);
#if 0
display_cpuid_update_microcode();
-#endif
-#if 0
print_pci_devices();
#endif
#if 1
@@ -94,9 +90,8 @@ static void main(unsigned long bist)
#endif
#if 0
int i;
- for(i = 0; i < 1; i++) {
+ for(i = 0; i < 1; i++)
dump_spd_registers();
- }
#endif
disable_watchdogs();
sdram_initialize(ARRAY_SIZE(mch), mch);
diff --git a/src/mainboard/supermicro/x6dhe_g/romstage.c b/src/mainboard/supermicro/x6dhe_g/romstage.c
index 995234b808..c5107d9fc1 100644
--- a/src/mainboard/supermicro/x6dhe_g/romstage.c
+++ b/src/mainboard/supermicro/x6dhe_g/romstage.c
@@ -49,12 +49,6 @@ static void main(unsigned long bist)
static const struct mem_controller mch[] = {
{
.node_id = 0,
- /*
- .f0 = PCI_DEV(0, 0x00, 0),
- .f1 = PCI_DEV(0, 0x00, 1),
- .f2 = PCI_DEV(0, 0x00, 2),
- .f3 = PCI_DEV(0, 0x00, 3),
- */
.channel0 = {DIMM0, DIMM1, DIMM2, DIMM3, },
.channel1 = {DIMM4, DIMM5, DIMM6, DIMM7, },
}
@@ -63,9 +57,8 @@ static void main(unsigned long bist)
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
- if (memory_initialized()) {
+ if (memory_initialized())
skip_romstage();
- }
}
/* Setup the console */
@@ -83,16 +76,13 @@ static void main(unsigned long bist)
/* config LPC decode for flash memory access */
device_t dev;
dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0);
- if (dev == PCI_DEV_INVALID) {
+ if (dev == PCI_DEV_INVALID)
die("Missing esb6300?");
- }
pci_write_config32(dev, 0xe8, 0x00000000);
pci_write_config8(dev, 0xf0, 0x00);
#if 0
display_cpuid_update_microcode();
-#endif
-#if 0
print_pci_devices();
#endif
#if 1
@@ -101,9 +91,8 @@ static void main(unsigned long bist)
#if 0
// dump_spd_registers(&cpu[0]);
int i;
- for(i = 0; i < 1; i++) {
+ for(i = 0; i < 1; i++)
dump_spd_registers();
- }
#endif
disable_watchdogs();
// dump_ipmi_registers();
@@ -111,8 +100,6 @@ static void main(unsigned long bist)
sdram_initialize(ARRAY_SIZE(mch), mch);
#if 0
dump_pci_devices();
-#endif
-#if 0
dump_pci_device(PCI_DEV(0, 0x00, 0));
dump_bar14(PCI_DEV(0, 0x00, 0));
#endif
diff --git a/src/mainboard/supermicro/x6dhe_g2/romstage.c b/src/mainboard/supermicro/x6dhe_g2/romstage.c
index eef04d4f28..af042477d2 100644
--- a/src/mainboard/supermicro/x6dhe_g2/romstage.c
+++ b/src/mainboard/supermicro/x6dhe_g2/romstage.c
@@ -47,13 +47,7 @@ static void main(unsigned long bist)
static const struct mem_controller mch[] = {
{
.node_id = 0,
- /*
- .f0 = PCI_DEV(0, 0x00, 0),
- .f1 = PCI_DEV(0, 0x00, 1),
- .f2 = PCI_DEV(0, 0x00, 2),
- .f3 = PCI_DEV(0, 0x00, 3),
- */
- .channel0 = {DIMM3, DIMM2, DIMM1, DIMM0, },
+ .channel0 = {DIMM3, DIMM2, DIMM1, DIMM0, },
.channel1 = {DIMM7, DIMM6, DIMM5, DIMM4, },
}
};
@@ -61,9 +55,8 @@ static void main(unsigned long bist)
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
- if (memory_initialized()) {
+ if (memory_initialized())
skip_romstage();
- }
}
/* Setup the console */
@@ -81,16 +74,13 @@ static void main(unsigned long bist)
/* config LPC decode for flash memory access */
device_t dev;
dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0);
- if (dev == PCI_DEV_INVALID) {
+ if (dev == PCI_DEV_INVALID)
die("Missing ich5r?");
- }
pci_write_config32(dev, 0xe8, 0x00000000);
pci_write_config8(dev, 0xf0, 0x00);
#if 0
display_cpuid_update_microcode();
-#endif
-#if 0
print_pci_devices();
#endif
#if 1
@@ -99,9 +89,8 @@ static void main(unsigned long bist)
#if 0
// dump_spd_registers(&cpu[0]);
int i;
- for(i = 0; i < 1; i++) {
+ for(i = 0; i < 1; i++)
dump_spd_registers();
- }
#endif
disable_watchdogs();
// dump_ipmi_registers();
diff --git a/src/mainboard/supermicro/x6dhr_ig/romstage.c b/src/mainboard/supermicro/x6dhr_ig/romstage.c
index 89429466cf..839be04184 100644
--- a/src/mainboard/supermicro/x6dhr_ig/romstage.c
+++ b/src/mainboard/supermicro/x6dhr_ig/romstage.c
@@ -62,9 +62,8 @@ static void main(unsigned long bist)
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
- if (memory_initialized()) {
+ if (memory_initialized())
skip_romstage();
- }
}
/* Setup the console */
@@ -82,16 +81,13 @@ static void main(unsigned long bist)
/* config LPC decode for flash memory access */
device_t dev;
dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
- if (dev == PCI_DEV_INVALID) {
+ if (dev == PCI_DEV_INVALID)
die("Missing ich5?");
- }
pci_write_config32(dev, 0xe8, 0x00000000);
pci_write_config8(dev, 0xf0, 0x00);
#if 0
display_cpuid_update_microcode();
-#endif
-#if 0
print_pci_devices();
#endif
#if 1
@@ -100,9 +96,8 @@ static void main(unsigned long bist)
#if 0
// dump_spd_registers(&cpu[0]);
int i;
- for(i = 0; i < 1; i++) {
+ for(i = 0; i < 1; i++)
dump_spd_registers();
- }
#endif
disable_watchdogs();
// dump_ipmi_registers();
diff --git a/src/mainboard/supermicro/x6dhr_ig2/romstage.c b/src/mainboard/supermicro/x6dhr_ig2/romstage.c
index ba6ba914be..76c94b228f 100644
--- a/src/mainboard/supermicro/x6dhr_ig2/romstage.c
+++ b/src/mainboard/supermicro/x6dhr_ig2/romstage.c
@@ -48,12 +48,6 @@ static void main(unsigned long bist)
static const struct mem_controller mch[] = {
{
.node_id = 0,
- /*
- .f0 = PCI_DEV(0, 0x00, 0),
- .f1 = PCI_DEV(0, 0x00, 1),
- .f2 = PCI_DEV(0, 0x00, 2),
- .f3 = PCI_DEV(0, 0x00, 3),
- */
.channel0 = {DIMM3, DIMM2, DIMM1, DIMM0, },
.channel1 = {DIMM7, DIMM6, DIMM5, DIMM4, },
}
@@ -62,9 +56,8 @@ static void main(unsigned long bist)
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
- if (memory_initialized()) {
+ if (memory_initialized())
skip_romstage();
- }
}
/* Setup the console */
@@ -82,16 +75,13 @@ static void main(unsigned long bist)
/* config LPC decode for flash memory access */
device_t dev;
dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
- if (dev == PCI_DEV_INVALID) {
+ if (dev == PCI_DEV_INVALID)
die("Missing ich5?");
- }
pci_write_config32(dev, 0xe8, 0x00000000);
pci_write_config8(dev, 0xf0, 0x00);
#if 0
display_cpuid_update_microcode();
-#endif
-#if 0
print_pci_devices();
#endif
#if 1
@@ -100,9 +90,8 @@ static void main(unsigned long bist)
#if 0
// dump_spd_registers(&cpu[0]);
int i;
- for(i = 0; i < 1; i++) {
+ for(i = 0; i < 1; i++)
dump_spd_registers();
- }
#endif
disable_watchdogs();
// dump_ipmi_registers();
@@ -110,8 +99,6 @@ static void main(unsigned long bist)
sdram_initialize(ARRAY_SIZE(mch), mch);
#if 0
dump_pci_devices();
-#endif
-#if 0
dump_pci_device(PCI_DEV(0, 0x00, 0));
dump_bar14(PCI_DEV(0, 0x00, 0));
#endif
diff --git a/src/mainboard/technexion/tim5690/romstage.c b/src/mainboard/technexion/tim5690/romstage.c
index 52d61f017a..f9f1e70ce1 100644
--- a/src/mainboard/technexion/tim5690/romstage.c
+++ b/src/mainboard/technexion/tim5690/romstage.c
@@ -47,17 +47,9 @@
#include "southbridge/amd/rs690/rs690_early_setup.c"
#include "southbridge/amd/sb600/sb600_early_setup.c"
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
-/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
@@ -90,7 +82,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
/* sb600_lpc_port80(); */
sb600_pci_port80();
}
@@ -98,9 +89,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
technexion_post_code_init();
technexion_post_code(LED_MESSAGE_START);
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
enable_rs690_dev8();
sb600_lpc_init();
@@ -141,8 +131,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
+ if ((cpuid1.edx & 0x6) == 0x6) {
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
@@ -154,7 +143,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
}
diff --git a/src/mainboard/technexion/tim8690/romstage.c b/src/mainboard/technexion/tim8690/romstage.c
index a172930e41..276ca08682 100644
--- a/src/mainboard/technexion/tim8690/romstage.c
+++ b/src/mainboard/technexion/tim8690/romstage.c
@@ -47,17 +47,9 @@
#include "southbridge/amd/rs690/rs690_early_setup.c"
#include "southbridge/amd/sb600/sb600_early_setup.c"
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
-/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
@@ -88,14 +80,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
-
/* sb600_lpc_port80(); */
sb600_pci_port80();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
enable_rs690_dev8();
sb600_lpc_init();
@@ -136,8 +126,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if( (cpuid1.edx & 0x6) == 0x6 ) {
-
+ if ((cpuid1.edx & 0x6) == 0x6 ) {
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
@@ -149,7 +138,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* show final fid and vid */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
}
diff --git a/src/mainboard/televideo/tc7020/romstage.c b/src/mainboard/televideo/tc7020/romstage.c
index 177c44739f..8074c874e1 100644
--- a/src/mainboard/televideo/tc7020/romstage.c
+++ b/src/mainboard/televideo/tc7020/romstage.c
@@ -35,20 +35,11 @@
static void main(unsigned long bist)
{
- /* Initialize the serial console. */
pc97317_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
- /* Halt if there was a built in self test failure. */
report_bist_failure(bist);
-
cs5530_enable_rom();
-
- /* Initialize RAM. */
sdram_init();
-
- /* Check whether RAM works. */
/* ram_check(0, 640 * 1024); */
}
-
diff --git a/src/mainboard/thomson/ip1000/romstage.c b/src/mainboard/thomson/ip1000/romstage.c
index b34f963b5f..e399dd128f 100644
--- a/src/mainboard/thomson/ip1000/romstage.c
+++ b/src/mainboard/thomson/ip1000/romstage.c
@@ -98,9 +98,8 @@ static void mb_early_setup(void)
void main(unsigned long bist)
{
if (bist == 0) {
- if (memory_initialized()) {
+ if (memory_initialized())
hard_reset();
- }
}
/* Set southbridge and superio gpios */
diff --git a/src/mainboard/traverse/geos/romstage.c b/src/mainboard/traverse/geos/romstage.c
index 79464970e4..f6a4ccfece 100644
--- a/src/mainboard/traverse/geos/romstage.c
+++ b/src/mainboard/traverse/geos/romstage.c
@@ -52,11 +52,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup. */
-}
-
void main(unsigned long bist)
{
post_code(0x01);
@@ -78,7 +73,6 @@ void main(unsigned long bist)
*/
/* If debug. real setup done in chipset init via devicetree.cb. */
cs5536_setup_onchipuart(1);
- mb_gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c
index 4f95458113..c7c5eb036a 100644
--- a/src/mainboard/tyan/s2735/romstage.c
+++ b/src/mainboard/tyan/s2735/romstage.c
@@ -46,9 +46,8 @@ void main(unsigned long bist)
},
};
- if (bist == 0) {
+ if (bist == 0)
enable_lapic();
- }
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -57,15 +56,12 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- if(bios_reset_detected()) {
+ if (bios_reset_detected())
hard_reset();
- }
enable_smbus();
#if 0
dump_spd_registers(&memctrl[0]);
-#endif
-#if 0
dump_smbus_registers();
#endif
@@ -79,4 +75,3 @@ void main(unsigned long bist)
dump_pci_device(PCI_DEV(0, 0, 0));
#endif
}
-
diff --git a/src/mainboard/tyan/s2850/romstage.c b/src/mainboard/tyan/s2850/romstage.c
index 41a4ffa79f..4f78797030 100644
--- a/src/mainboard/tyan/s2850/romstage.c
+++ b/src/mainboard/tyan/s2850/romstage.c
@@ -29,28 +29,23 @@
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ if (is_cpu_pre_c0())
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ else
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -86,16 +81,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the amd8111 */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
init_cpus(cpu_init_detectedx);
- }
// post_code(0x32);
@@ -128,4 +119,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_cache_as_ram();
}
-
diff --git a/src/mainboard/tyan/s2875/romstage.c b/src/mainboard/tyan/s2875/romstage.c
index 275ff2720c..55448bd381 100644
--- a/src/mainboard/tyan/s2875/romstage.c
+++ b/src/mainboard/tyan/s2875/romstage.c
@@ -29,28 +29,23 @@
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ if (is_cpu_pre_c0())
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ else
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -97,15 +92,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
init_cpus(cpu_init_detectedx);
- }
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -135,6 +127,4 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sdram_initialize(ARRAY_SIZE(cpu), cpu);
post_cache_as_ram();
-
}
-
diff --git a/src/mainboard/tyan/s2880/romstage.c b/src/mainboard/tyan/s2880/romstage.c
index d9328dd186..9ecf09bd3e 100644
--- a/src/mainboard/tyan/s2880/romstage.c
+++ b/src/mainboard/tyan/s2880/romstage.c
@@ -29,28 +29,23 @@
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ if (is_cpu_pre_c0())
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ else
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -97,16 +92,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
init_cpus(cpu_init_detectedx);
- }
-
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -138,4 +129,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_cache_as_ram();
}
-
diff --git a/src/mainboard/tyan/s2881/romstage.c b/src/mainboard/tyan/s2881/romstage.c
index c7dce483a2..9a20be7089 100644
--- a/src/mainboard/tyan/s2881/romstage.c
+++ b/src/mainboard/tyan/s2881/romstage.c
@@ -28,28 +28,23 @@
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ if (is_cpu_pre_c0())
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ else
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -69,33 +64,27 @@ static inline int spd_read_byte(unsigned device, unsigned address)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
#endif
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the amd8111 */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
// post_code(0x32);
@@ -131,8 +120,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_smbus();
#if 0
dump_spd_registers(&cpu[0]);
-#endif
-#if 0
dump_smbus_registers();
#endif
@@ -151,4 +138,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_cache_as_ram();
}
-
diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c
index cfcc7a9ae5..9ecf09bd3e 100644
--- a/src/mainboard/tyan/s2882/romstage.c
+++ b/src/mainboard/tyan/s2882/romstage.c
@@ -29,28 +29,23 @@
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ if (is_cpu_pre_c0())
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ else
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -97,15 +92,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
init_cpus(cpu_init_detectedx);
- }
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
diff --git a/src/mainboard/tyan/s2885/romstage.c b/src/mainboard/tyan/s2885/romstage.c
index 012b915db7..3ebe6b5698 100644
--- a/src/mainboard/tyan/s2885/romstage.c
+++ b/src/mainboard/tyan/s2885/romstage.c
@@ -28,28 +28,23 @@
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ if (is_cpu_pre_c0())
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ else
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
udelay(90);
}
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -59,7 +54,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
@@ -78,26 +73,18 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
- /* Setup the amd8111 */
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
-
-// post_code(0x32);
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
diff --git a/src/mainboard/tyan/s2891/romstage.c b/src/mainboard/tyan/s2891/romstage.c
index 75405753e9..39bdc65e7e 100644
--- a/src/mainboard/tyan/s2891/romstage.c
+++ b/src/mainboard/tyan/s2891/romstage.c
@@ -25,18 +25,9 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-static void memreset_setup(void)
-{
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void memreset_setup(void) { }
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -46,7 +37,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
#include "southbridge/nvidia/ck804/ck804_early_setup.c"
@@ -92,23 +83,18 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
// post_code(0x32);
@@ -135,9 +121,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#endif
needs_reset |= ht_setup_chains_x();
-
needs_reset |= ck804_early_setup_x();
-
if (needs_reset) {
printk(BIOS_INFO, "ht reset -\n");
soft_reset();
@@ -152,8 +136,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
enable_smbus();
#if 0
dump_spd_registers(&cpu[0]);
-#endif
-#if 0
dump_smbus_registers();
#endif
@@ -162,12 +144,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#if 0
print_pci_devices();
-#endif
-
-#if 0
dump_pci_devices();
#endif
post_cache_as_ram();
}
-
diff --git a/src/mainboard/tyan/s2892/romstage.c b/src/mainboard/tyan/s2892/romstage.c
index 180609c72e..2ab6d32090 100644
--- a/src/mainboard/tyan/s2892/romstage.c
+++ b/src/mainboard/tyan/s2892/romstage.c
@@ -25,14 +25,8 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -42,7 +36,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
@@ -84,23 +78,18 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
// post_code(0x32);
@@ -123,9 +112,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
#endif
needs_reset |= ht_setup_chains_x();
-
needs_reset |= ck804_early_setup_x();
-
if (needs_reset) {
printk(BIOS_INFO, "ht reset -\n");
soft_reset();
@@ -143,4 +130,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_cache_as_ram();
}
-
diff --git a/src/mainboard/tyan/s2895/romstage.c b/src/mainboard/tyan/s2895/romstage.c
index 84907ccc43..7a6fcbc3a7 100644
--- a/src/mainboard/tyan/s2895/romstage.c
+++ b/src/mainboard/tyan/s2895/romstage.c
@@ -19,38 +19,31 @@
#include "northbridge/amd/amdk8/reset_test.c"
#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
-#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
-#define SUPERIO_GPIO_IO_BASE 0x400
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/debug.c"
#include <cpu/amd/mtrr.h>
#include "cpu/x86/mtrr/earlymtrr.c"
#include "northbridge/amd/amdk8/setup_resource_map.c"
-#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
-static void memreset_setup(void)
-{
-}
+#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
+#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
+#define SUPERIO_GPIO_IO_BASE 0x400
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
+static void memreset_setup(void) { }
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static void sio_gpio_setup(void)
{
unsigned value;
/*Enable onboard scsi*/
- lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c,
+ (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
}
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
@@ -59,7 +52,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
@@ -113,23 +106,18 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -151,9 +139,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
wait_all_other_cores_started(bsp_apicid);
needs_reset |= ht_setup_chains_x();
-
needs_reset |= ck804_early_setup_x();
-
if (needs_reset) {
printk(BIOS_INFO, "ht reset -\n");
soft_reset();
@@ -172,4 +158,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_cache_as_ram();
}
-
diff --git a/src/mainboard/tyan/s2912/romstage.c b/src/mainboard/tyan/s2912/romstage.c
index 8a3c5c3a79..ab0b4220b1 100644
--- a/src/mainboard/tyan/s2912/romstage.c
+++ b/src/mainboard/tyan/s2912/romstage.c
@@ -53,14 +53,8 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void memreset(int controllers, const struct mem_controller *ctrl) { }
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -113,40 +107,32 @@ static void sio_setup(void)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
- // Node 0
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
- // Node 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
+ // Node 0
+ DIMM0, DIMM2, 0, 0,
+ DIMM1, DIMM3, 0, 0,
+ // Node 1
+ DIMM4, DIMM6, 0, 0,
+ DIMM5, DIMM7, 0, 0,
};
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE
+ CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
int needs_reset = 0;
unsigned bsp_apicid = 0;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
setup_mb_resource_map();
-
uart_init();
/* Halt if there was a built in self test failure */
@@ -181,26 +167,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
#if CONFIG_SET_FIDVID
-
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
-
enable_fid_change();
-
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-
init_fidvid_bsp(bsp_apicid);
-
// show final fid and vid
{
msr_t msr;
msr=rdmsr(0xc0010042);
print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n");
-
}
#endif
diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c
index 6f420bfe63..550e86607a 100644
--- a/src/mainboard/tyan/s2912_fam10/romstage.c
+++ b/src/mainboard/tyan/s2912_fam10/romstage.c
@@ -52,10 +52,7 @@
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
+static void activate_spd_rom(const struct mem_controller *ctrl) { }
static inline int spd_read_byte(unsigned device, unsigned address)
{
@@ -117,29 +114,22 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
- u32 bsp_apicid = 0;
- u32 val;
- u32 wants_reset;
+ u32 bsp_apicid = 0, val, wants_reset;
msr_t msr;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
-
sio_setup();
-
- /* Setup the mcp55 */
mcp55_enable_rom();
}
post_code(0x30);
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
- }
post_code(0x32);
@@ -256,4 +246,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
post_code(0x43); // Should never see this post code.
}
-
diff --git a/src/mainboard/tyan/s4880/romstage.c b/src/mainboard/tyan/s4880/romstage.c
index 09a052fc3c..b542bfdbe5 100644
--- a/src/mainboard/tyan/s4880/romstage.c
+++ b/src/mainboard/tyan/s4880/romstage.c
@@ -28,23 +28,22 @@
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ if (is_cpu_pre_c0())
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ else
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
udelay(90);
}
}
+
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_HUB 0x18
@@ -52,6 +51,7 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl)
smbus_write_byte(SMBUS_HUB, 0x01, device);
smbus_write_byte(SMBUS_HUB, 0x03, 0);
}
+
#if 0
static inline void change_i2c_mux(unsigned device)
{
@@ -73,7 +73,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
@@ -110,7 +110,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
},
#endif
-
#if CONFIG_MAX_PHYSICAL_CPUS > 2
{
.node_id = 2,
@@ -140,15 +139,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
init_cpus(cpu_init_detectedx);
- }
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
diff --git a/src/mainboard/tyan/s4882/romstage.c b/src/mainboard/tyan/s4882/romstage.c
index 152996fee4..7750750ca1 100644
--- a/src/mainboard/tyan/s4882/romstage.c
+++ b/src/mainboard/tyan/s4882/romstage.c
@@ -27,23 +27,22 @@
static void memreset_setup(void)
{
- if (is_cpu_pre_c0()) {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- }
- else {
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- }
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+ if (is_cpu_pre_c0())
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
+ else
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
+ outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+ outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
udelay(90);
}
}
+
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_HUB 0x18
@@ -57,6 +56,7 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl)
smbus_write_byte(SMBUS_HUB, 0x03, 0);
}
+
#if 0
static inline void change_i2c_mux(unsigned device)
{
@@ -81,7 +81,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
-#include "resourcemap.c" /* tyan does not want the default */
+#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include <spd.h>
#include "cpu/amd/car/post_cache_as_ram.c"
@@ -112,24 +112,18 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned bsp_apicid = 0, nodes;
struct mem_controller ctrl[8];
- unsigned nodes;
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
-
enumerate_ht_chain();
-
amd8111_enable_rom();
}
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
-
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
@@ -169,6 +163,4 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sdram_initialize(nodes, ctrl);
post_cache_as_ram();
-
}
-
diff --git a/src/mainboard/via/epia-cn/romstage.c b/src/mainboard/via/epia-cn/romstage.c
index 2292b0a5ae..1d37ced6d9 100644
--- a/src/mainboard/via/epia-cn/romstage.c
+++ b/src/mainboard/via/epia-cn/romstage.c
@@ -47,7 +47,8 @@ static void enable_mainboard_devices(void)
{
device_t dev;
- dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
if (dev == PCI_DEV_INVALID)
die("Southbridge not found!!!\n");
@@ -87,21 +88,10 @@ void main(unsigned long bist)
enable_vt8235_serial();
uart_init();
console_init();
-
- print_spew("In romstage.c:main()\n");
-
enable_smbus();
smbus_fixup(&ctrl);
-
- /* Halt if there was a built-in self test failure. */
report_bist_failure(bist);
-
- print_debug("Enabling mainboard devices\n");
enable_mainboard_devices();
-
ddr_ram_setup(&ctrl);
-
/* ram_check(0, 640 * 1024); */
-
- print_spew("Leaving romstage.c:main()\n");
}
diff --git a/src/mainboard/via/epia-m/romstage.c b/src/mainboard/via/epia-m/romstage.c
index 7dba82c852..508d298604 100644
--- a/src/mainboard/via/epia-m/romstage.c
+++ b/src/mainboard/via/epia-m/romstage.c
@@ -30,7 +30,7 @@ static void enable_mainboard_devices(void)
device_t dev;
dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_8235), 0);
+ PCI_DEVICE_ID_VIA_8235), 0);
if (dev == PCI_DEV_INVALID) {
die("Southbridge not found!!!\n");
@@ -72,9 +72,7 @@ static void main(unsigned long bist)
{
device_t dev;
- /*
- * Enable VGA; 32MB buffer.
- */
+ /* Enable VGA; 32MB buffer. */
pci_write_config8(0, 0xe1, 0xdd);
/*
@@ -83,9 +81,8 @@ static void main(unsigned long bist)
*/
dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_6305), 0);
- if (dev != PCI_DEV_INVALID) {
+ if (dev != PCI_DEV_INVALID)
pci_write_config8(dev, 0x15, 0x1c);
- }
enable_vt8235_serial();
uart_init();
@@ -122,12 +119,8 @@ static void main(unsigned long bist)
}
#endif
- if (bist == 0) {
- print_debug(" Doing MTRR init.\n");
+ if (bist == 0)
early_mtrr_init();
- }
//dump_pci_devices();
-
- print_spew("Leaving romstage.c:main()\n");
}
diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c
index 62ea809b47..6d0957049b 100644
--- a/src/mainboard/via/epia-m700/romstage.c
+++ b/src/mainboard/via/epia-m700/romstage.c
@@ -448,17 +448,6 @@ void main(unsigned long bist)
/* This fix does help vx800!, but vx855 doesn't need this. */
/* smbus_fixup(&ctrl); */
- if (bist == 0) {
- /*
- * CAR needs MTRR until memory is ok, so disable this
- * early_mtrr_init() call.
- */
-#if 0
- print_debug("doing early_mtrr\n");
- early_mtrr_init();
-#endif
- }
-
/* Halt if there was a built-in self test failure. */
report_bist_failure(bist);
diff --git a/src/mainboard/via/epia-n/romstage.c b/src/mainboard/via/epia-n/romstage.c
index 449fe95ff1..90d92383ad 100644
--- a/src/mainboard/via/epia-n/romstage.c
+++ b/src/mainboard/via/epia-n/romstage.c
@@ -62,7 +62,8 @@ static void enable_mainboard_devices(void)
device_t dev;
u8 reg;
- dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
if (dev == PCI_DEV_INVALID)
die("Southbridge not found!!!\n");
@@ -110,14 +111,10 @@ static void main(unsigned long bist)
pci_write_config8(ctrl.d0f0, 0x4f, 0x01);
w83697hf_set_clksel_48(SERIAL_DEV);
-
w83697hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
uart_init();
console_init();
- print_spew("In romstage.c:main()\n");
-
enable_smbus();
smbus_fixup(&ctrl);
@@ -130,18 +127,13 @@ static void main(unsigned long bist)
print_debug("Enable F-ROM Shadow RAM\n");
enable_shadow_ram();
- /* setup cpu */
print_debug("Setup CPU Interface\n");
c3_cpu_setup(ctrl.d0f2);
ddr_ram_setup();
- if (bist == 0) {
- print_debug("doing early_mtrr\n");
+ if (bist == 0)
early_mtrr_init();
- }
//ram_check(0, 640 * 1024);
-
- print_spew("Leaving romstage.c:main()\n");
}
diff --git a/src/mainboard/via/epia/romstage.c b/src/mainboard/via/epia/romstage.c
index 24167baebe..2bae6c4c81 100644
--- a/src/mainboard/via/epia/romstage.c
+++ b/src/mainboard/via/epia/romstage.c
@@ -31,9 +31,8 @@ static void enable_mainboard_devices(void)
dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
- if (dev == PCI_DEV_INVALID) {
+ if (dev == PCI_DEV_INVALID)
die("Southbridge not found!!!\n");
- }
pci_write_config8(dev, 0x50, 7);
pci_write_config8(dev, 0x51, 0xff);
@@ -74,9 +73,9 @@ static void enable_shadow_ram(void)
static void main(unsigned long bist)
{
- if (bist == 0) {
+ if (bist == 0)
early_mtrr_init();
- }
+
enable_vt8231_serial();
uart_init();
console_init();
diff --git a/src/mainboard/via/pc2500e/romstage.c b/src/mainboard/via/pc2500e/romstage.c
index 3aa599bb49..657b3cde6b 100644
--- a/src/mainboard/via/pc2500e/romstage.c
+++ b/src/mainboard/via/pc2500e/romstage.c
@@ -63,14 +63,9 @@ void main(unsigned long bist)
it8716f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
-
enable_smbus();
smbus_fixup(&ctrl);
-
- /* Halt if there was a built-in self test failure. */
report_bist_failure(bist);
-
ddr_ram_setup(&ctrl);
-
/* ram_check(0, 640 * 1024); */
}
diff --git a/src/mainboard/winent/pl6064/romstage.c b/src/mainboard/winent/pl6064/romstage.c
index 0ba37f173a..becd698c0a 100644
--- a/src/mainboard/winent/pl6064/romstage.c
+++ b/src/mainboard/winent/pl6064/romstage.c
@@ -56,11 +56,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup. */
-}
-
void main(unsigned long bist)
{
post_code(0x01);
@@ -79,7 +74,6 @@ void main(unsigned long bist)
*/
w83627hf_set_clksel_48(SERIAL_DEV);
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- mb_gpio_init();
uart_init();
console_init();
diff --git a/src/mainboard/wyse/s50/romstage.c b/src/mainboard/wyse/s50/romstage.c
index ba59d562c0..b1ece302fe 100644
--- a/src/mainboard/wyse/s50/romstage.c
+++ b/src/mainboard/wyse/s50/romstage.c
@@ -81,5 +81,4 @@ void main(unsigned long bist)
/* Check all of memory */
/*ram_check(0x00000000, 640*1024);*/
- print_err("ram check done\n");
}
diff --git a/src/northbridge/via/vx800/examples/romstage.c b/src/northbridge/via/vx800/examples/romstage.c
index f0e535a02c..6fbc4ebad4 100644
--- a/src/northbridge/via/vx800/examples/romstage.c
+++ b/src/northbridge/via/vx800/examples/romstage.c
@@ -81,9 +81,7 @@ static void enable_mainboard_devices(void)
print_debug("In enable_mainboard_devices \n");
- /*
- Enable P2P Bridge Header for External PCI BUS.
- */
+ /* Enable P2P bridge Header for external PCI bus. */
dev = pci_locate_device(PCI_ID(0x1106, 0xa353), 0);
pci_write_config8(dev, 0x4f, 0x41);
}
@@ -91,6 +89,7 @@ static void enable_mainboard_devices(void)
static void enable_shadow_ram(void)
{
uint8_t shadowreg;
+
pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0xff);
/* 0xf0000-0xfffff - ACPI tables */
shadowreg = pci_read_config8(PCI_DEV(0, 0, 3), 0x83);