diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/ec/google/chromeec/ec_commands.h | 739 |
1 files changed, 697 insertions, 42 deletions
diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h index f8884f32df..0687641416 100644 --- a/src/ec/google/chromeec/ec_commands.h +++ b/src/ec/google/chromeec/ec_commands.h @@ -1,4 +1,4 @@ -/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved. +/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved. * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -57,18 +57,22 @@ #define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ /* The offset address of each type of data in mapped memory. */ -#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */ -#define EC_MEMMAP_FAN 0x10 /* Fan speeds */ -#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */ -#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */ +#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */ +#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */ +#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */ +#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */ #define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ #define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ #define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ #define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ #define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ -#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */ -#define EC_MEMMAP_SWITCHES 0x30 -#define EC_MEMMAP_HOST_EVENTS 0x34 +#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */ +/* Unused 0x28 - 0x2f */ +#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */ +/* Unused 0x31 - 0x33 */ +#define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */ +/* Reserve 0x38 - 0x3f for additional host event-related stuff */ +/* Battery values are all 32 bits */ #define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ #define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ #define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ @@ -77,11 +81,24 @@ #define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ #define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ #define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ +/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */ #define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ #define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ #define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ #define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ -#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (uint16_t) */ +#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */ +/* Unused 0x84 - 0x8f */ +#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/ +/* Unused 0x91 */ +#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometer data 0x92 - 0x9f */ +#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */ +/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */ + + +/* Define the format of the accelerometer mapped memory status byte. */ +#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f +#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4) +#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7) /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ #define EC_TEMP_SENSOR_ENTRIES 16 @@ -206,7 +223,8 @@ enum ec_status { EC_RES_OVERFLOW = 11, /* Table / data overflow */ EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ - EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */ + EC_RES_RESPONSE_TOO_BIG = 14, /* Response was too big to handle */ + EC_RES_BUS_ERROR = 15 /* Communications bus error */ }; /* @@ -253,6 +271,8 @@ enum host_event_code { EC_HOST_EVENT_HANG_DETECT = 20, /* Hang detect logic detected a hang and warm rebooted the AP */ EC_HOST_EVENT_HANG_REBOOT = 21, + + /* PD MCU triggering host event */ EC_HOST_EVENT_PD_MCU = 22, /* @@ -484,7 +504,7 @@ struct ec_host_response { /* * Notes on commands: * - * Each command is an 8-byte command value. Commands which take params or + * Each command is an 16-bit command value. Commands which take params or * return response data specify structs for that data. If no struct is * specified, the command does not input or output data, respectively. * Parameter/response length is implicit in the structs. Some underlying @@ -935,7 +955,7 @@ struct rgb_s { /* List of tweakable parameters. NOTE: It's __packed so it can be sent in a * host command, but the alignment is the same regardless. Keep it that way. */ -struct lightbar_params { +struct lightbar_params_v0 { /* Timing */ int32_t google_ramp_up; int32_t google_ramp_down; @@ -969,32 +989,81 @@ struct lightbar_params { struct rgb_s color[8]; /* 0-3 are Google colors */ } __packed; +struct lightbar_params_v1 { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + int32_t tap_tick_delay; + int32_t tap_display_time; + + /* Tap-for-battery params */ + uint8_t tap_pct_red; + uint8_t tap_pct_green; + uint8_t tap_seg_min_on; + uint8_t tap_seg_max_on; + uint8_t tap_seg_osc; + uint8_t tap_idx[3]; + + /* Oscillation */ + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __packed; + struct ec_params_lightbar { uint8_t cmd; /* Command (see enum lightbar_command) */ union { struct { /* no args */ - } dump, off, on, init, get_seq, get_params, version; + } dump, off, on, init, get_seq, get_params_v0, get_params_v1, + version, get_brightness, get_demo; - struct num { + struct { uint8_t num; - } brightness, seq, demo; + } set_brightness, seq, demo; - struct reg { + struct { uint8_t ctrl, reg, value; } reg; - struct rgb { + struct { uint8_t led, red, green, blue; - } rgb; + } set_rgb; + + struct { + uint8_t led; + } get_rgb; - struct lightbar_params set_params; + struct lightbar_params_v0 set_params_v0; + struct lightbar_params_v1 set_params_v1; }; } __packed; struct ec_response_lightbar { union { - struct dump { + struct { struct { uint8_t reg; uint8_t ic0; @@ -1002,20 +1071,26 @@ struct ec_response_lightbar { } vals[23]; } dump; - struct get_seq { + struct { uint8_t num; - } get_seq; + } get_seq, get_brightness, get_demo; - struct lightbar_params get_params; + struct lightbar_params_v0 get_params_v0; + struct lightbar_params_v1 get_params_v1; - struct version { + struct { uint32_t num; uint32_t flags; } version; struct { + uint8_t red, green, blue; + } get_rgb; + + struct { /* no return params */ - } off, on, init, brightness, seq, reg, rgb, demo, set_params; + } off, on, init, set_brightness, seq, reg, set_rgb, + demo, set_params_v0, set_params_v1; }; } __packed; @@ -1025,15 +1100,20 @@ enum lightbar_command { LIGHTBAR_CMD_OFF = 1, LIGHTBAR_CMD_ON = 2, LIGHTBAR_CMD_INIT = 3, - LIGHTBAR_CMD_BRIGHTNESS = 4, + LIGHTBAR_CMD_SET_BRIGHTNESS = 4, LIGHTBAR_CMD_SEQ = 5, LIGHTBAR_CMD_REG = 6, - LIGHTBAR_CMD_RGB = 7, + LIGHTBAR_CMD_SET_RGB = 7, LIGHTBAR_CMD_GET_SEQ = 8, LIGHTBAR_CMD_DEMO = 9, - LIGHTBAR_CMD_GET_PARAMS = 10, - LIGHTBAR_CMD_SET_PARAMS = 11, + LIGHTBAR_CMD_GET_PARAMS_V0 = 10, + LIGHTBAR_CMD_SET_PARAMS_V0 = 11, LIGHTBAR_CMD_VERSION = 12, + LIGHTBAR_CMD_GET_BRIGHTNESS = 13, + LIGHTBAR_CMD_GET_RGB = 14, + LIGHTBAR_CMD_GET_DEMO = 15, + LIGHTBAR_CMD_GET_PARAMS_V1 = 16, + LIGHTBAR_CMD_SET_PARAMS_V1 = 17, LIGHTBAR_NUM_CMDS }; @@ -1145,6 +1225,182 @@ enum ec_vboot_hash_status { #define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd /*****************************************************************************/ +/* + * Motion sense commands. We'll make separate structs for sub-commands with + * different input args, so that we know how much to expect. + */ +#define EC_CMD_MOTION_SENSE_CMD 0x2B + +/* Motion sense commands */ +enum motionsense_command { + /* + * Dump command returns all motion sensor data including motion sense + * module flags and individual sensor flags. + */ + MOTIONSENSE_CMD_DUMP = 0, + + /* + * Info command returns data describing the details of a given sensor, + * including enum motionsensor_type, enum motionsensor_location, and + * enum motionsensor_chip. + */ + MOTIONSENSE_CMD_INFO = 1, + + /* + * EC Rate command is a setter/getter command for the EC sampling rate + * of all motion sensors in milliseconds. + */ + MOTIONSENSE_CMD_EC_RATE = 2, + + /* + * Sensor ODR command is a setter/getter command for the output data + * rate of a specific motion sensor in millihertz. + */ + MOTIONSENSE_CMD_SENSOR_ODR = 3, + + /* + * Sensor range command is a setter/getter command for the range of + * a specified motion sensor in +/-G's or +/- deg/s. + */ + MOTIONSENSE_CMD_SENSOR_RANGE = 4, + + /* + * Setter/getter command for the keyboard wake angle. When the lid + * angle is greater than this value, keyboard wake is disabled in S3, + * and when the lid angle goes less than this value, keyboard wake is + * enabled. Note, the lid angle measurement is an approximate, + * un-calibrated value, hence the wake angle isn't exact. + */ + MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5, + + /* Number of motionsense sub-commands. */ + MOTIONSENSE_NUM_CMDS +}; + +enum motionsensor_id { + EC_MOTION_SENSOR_ACCEL_BASE = 0, + EC_MOTION_SENSOR_ACCEL_LID = 1, + EC_MOTION_SENSOR_GYRO = 2, + + /* + * Note, if more sensors are added and this count changes, the padding + * in ec_response_motion_sense dump command must be modified. + */ + EC_MOTION_SENSOR_COUNT = 3 +}; + +/* List of motion sensor types. */ +enum motionsensor_type { + MOTIONSENSE_TYPE_ACCEL = 0, + MOTIONSENSE_TYPE_GYRO = 1, +}; + +/* List of motion sensor locations. */ +enum motionsensor_location { + MOTIONSENSE_LOC_BASE = 0, + MOTIONSENSE_LOC_LID = 1, +}; + +/* List of motion sensor chips. */ +enum motionsensor_chip { + MOTIONSENSE_CHIP_KXCJ9 = 0, + MOTIONSENSE_CHIP_LSM6DS0 = 1, +}; + +/* Module flag masks used for the dump sub-command. */ +#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0) + +/* Sensor flag masks used for the dump sub-command. */ +#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0) + +/* + * Send this value for the data element to only perform a read. If you + * send any other value, the EC will interpret it as data to set and will + * return the actual value set. + */ +#define EC_MOTION_SENSE_NO_VALUE -1 + +struct ec_params_motion_sense { + uint8_t cmd; + union { + /* Used for MOTIONSENSE_CMD_DUMP. */ + struct { + /* no args */ + } dump; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE and + * MOTIONSENSE_CMD_KB_WAKE_ANGLE. + */ + struct { + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int16_t data; + } ec_rate, kb_wake_angle; + + /* Used for MOTIONSENSE_CMD_INFO. */ + struct { + /* Should be element of enum motionsensor_id. */ + uint8_t sensor_num; + } info; + + /* + * Used for MOTIONSENSE_CMD_SENSOR_ODR and + * MOTIONSENSE_CMD_SENSOR_RANGE. + */ + struct { + /* Should be element of enum motionsensor_id. */ + uint8_t sensor_num; + + /* Rounding flag, true for round-up, false for down. */ + uint8_t roundup; + + uint16_t reserved; + + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int32_t data; + } sensor_odr, sensor_range; + }; +} __packed; + +struct ec_response_motion_sense { + union { + /* Used for MOTIONSENSE_CMD_DUMP. */ + struct { + /* Flags representing the motion sensor module. */ + uint8_t module_flags; + + /* Flags for each sensor in enum motionsensor_id. */ + uint8_t sensor_flags[EC_MOTION_SENSOR_COUNT]; + + /* Array of all sensor data. Each sensor is 3-axis. */ + int16_t data[3*EC_MOTION_SENSOR_COUNT]; + } dump; + + /* Used for MOTIONSENSE_CMD_INFO. */ + struct { + /* Should be element of enum motionsensor_type. */ + uint8_t type; + + /* Should be element of enum motionsensor_location. */ + uint8_t location; + + /* Should be element of enum motionsensor_chip. */ + uint8_t chip; + } info; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, + * MOTIONSENSE_CMD_SENSOR_RANGE, and + * MOTIONSENSE_CMD_KB_WAKE_ANGLE. + */ + struct { + /* Current value of the parameter queried. */ + int32_t ret; + } ec_rate, sensor_odr, sensor_range, kb_wake_angle; + }; +} __packed; + +/*****************************************************************************/ /* USB charging control commands */ /* Set USB port charging mode */ @@ -1215,8 +1471,40 @@ struct ec_response_rtc { /*****************************************************************************/ /* Port80 log access */ +/* Maximum entries that can be read/written in a single command */ +#define EC_PORT80_SIZE_MAX 32 + /* Get last port80 code from previous boot */ #define EC_CMD_PORT80_LAST_BOOT 0x48 +#define EC_CMD_PORT80_READ 0x48 + +enum ec_port80_subcmd { + EC_PORT80_GET_INFO = 0, + EC_PORT80_READ_BUFFER, +}; + +struct ec_params_port80_read { + uint16_t subcmd; + union { + struct { + uint32_t offset; + uint32_t num_entries; + } read_buffer; + }; +} __packed; + +struct ec_response_port80_read { + union { + struct { + uint32_t writes; + uint32_t history_size; + uint32_t last_boot; + } get_info; + struct { + uint16_t codes[EC_PORT80_SIZE_MAX]; + } data; + }; +} __packed; struct ec_response_port80_last_boot { uint16_t code; @@ -1317,6 +1605,18 @@ struct ec_params_tmp006_set_calibration { float b2; } __packed; +/* Read raw TMP006 data */ +#define EC_CMD_TMP006_GET_RAW 0x55 + +struct ec_params_tmp006_get_raw { + uint8_t index; +} __packed; + +struct ec_response_tmp006_get_raw { + int32_t t; /* In 1/100 K */ + int32_t v; /* In nV */ +}; + /*****************************************************************************/ /* MKBP - Matrix KeyBoard Protocol */ @@ -1515,11 +1815,41 @@ struct ec_params_switch_enable_backlight { /* Enable/disable WLAN/Bluetooth */ #define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91 +#define EC_VER_SWITCH_ENABLE_WIRELESS 1 -struct ec_params_switch_enable_wireless { +/* Version 0 params; no response */ +struct ec_params_switch_enable_wireless_v0 { uint8_t enabled; } __packed; +/* Version 1 params */ +struct ec_params_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Which flags to copy from now_flags */ + uint8_t now_mask; + + /* + * Flags to leave enabled in S3, if they're on at the S0->S3 + * transition. (Other flags will be disabled by the S0->S3 + * transition.) + */ + uint8_t suspend_flags; + + /* Which flags to copy from suspend_flags */ + uint8_t suspend_mask; +} __packed; + +/* Version 1 response */ +struct ec_response_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Flags to leave enabled in S3 */ + uint8_t suspend_flags; +} __packed; + /*****************************************************************************/ /* GPIO commands. Only available on EC if write protect has been disabled. */ @@ -1534,6 +1864,7 @@ struct ec_params_gpio_set { /* Get GPIO value */ #define EC_CMD_GPIO_GET 0x93 +/* Version 0 of input params and response */ struct ec_params_gpio_get { char name[32]; } __packed; @@ -1541,6 +1872,38 @@ struct ec_response_gpio_get { uint8_t val; } __packed; +/* Version 1 of input params and response */ +struct ec_params_gpio_get_v1 { + uint8_t subcmd; + union { + struct { + char name[32]; + } get_value_by_name; + struct { + uint8_t index; + } get_info; + }; +} __packed; + +struct ec_response_gpio_get_v1 { + union { + struct { + uint8_t val; + } get_value_by_name, get_count; + struct { + uint8_t val; + char name[32]; + uint32_t flags; + } get_info; + }; +} __packed; + +enum gpio_get_subcmd { + EC_GPIO_GET_BY_NAME = 0, + EC_GPIO_GET_COUNT = 1, + EC_GPIO_GET_INFO = 2, +}; + /*****************************************************************************/ /* I2C commands. Only available when flash write protect is unlocked. */ @@ -1609,13 +1972,20 @@ struct ec_params_charge_control { /*****************************************************************************/ /* - * Cut off battery power output if the battery supports. + * Cut off battery power immediately or after the host has shut down. * - * For unsupported battery, just don't implement this command and lets EC - * return EC_RES_INVALID_COMMAND. + * return EC_RES_INVALID_COMMAND if unsupported by a board/battery. + * EC_RES_SUCCESS if the command was successful. + * EC_RES_ERROR if the cut off command failed. */ #define EC_CMD_BATTERY_CUT_OFF 0x99 +#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0) + +struct ec_params_battery_cutoff { + uint8_t flags; +} __packed; + /*****************************************************************************/ /* USB port mux control. */ @@ -1680,9 +2050,6 @@ struct ec_response_power_info { #define EC_CMD_I2C_PASSTHRU 0x9e -/* Slave address is 10 (not 7) bit */ -#define EC_I2C_FLAG_10BIT (1 << 16) - /* Read data; if not present, message is a write */ #define EC_I2C_FLAG_READ (1 << 15) @@ -1769,14 +2136,79 @@ struct ec_params_hang_detect { } __packed; /*****************************************************************************/ -/* Debug commands for battery charging */ +/* Commands for battery charging */ /* - * Dump charge state machine context. - * - * Response is a binary dump of charge state machine context. + * This is the single catch-all host command to exchange data regarding the + * charge state machine (v2 and up). + */ +#define EC_CMD_CHARGE_STATE 0xa0 + +/* Subcommands for this host command */ +enum charge_state_command { + CHARGE_STATE_CMD_GET_STATE, + CHARGE_STATE_CMD_GET_PARAM, + CHARGE_STATE_CMD_SET_PARAM, + CHARGE_STATE_NUM_CMDS +}; + +/* + * Known param numbers are defined here. Ranges are reserved for board-specific + * params, which are handled by the particular implementations. */ -#define EC_CMD_CHARGE_DUMP 0xa0 +enum charge_state_params { + CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */ + CS_PARAM_CHG_CURRENT, /* charger current limit */ + CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ + CS_PARAM_CHG_STATUS, /* charger-specific status */ + CS_PARAM_CHG_OPTION, /* charger-specific options */ + /* How many so far? */ + CS_NUM_BASE_PARAMS, + + /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */ + CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, + CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff, + + /* Other custom param ranges go here... */ +}; + +struct ec_params_charge_state { + uint8_t cmd; /* enum charge_state_command */ + union { + struct { + /* no args */ + } get_state; + + struct { + uint32_t param; /* enum charge_state_param */ + } get_param; + + struct { + uint32_t param; /* param to set */ + uint32_t value; /* value to set */ + } set_param; + }; +} __packed; + +struct ec_response_charge_state { + union { + struct { + int ac; + int chg_voltage; + int chg_current; + int chg_input_current; + int batt_state_of_charge; + } get_state; + + struct { + uint32_t value; + } get_param; + struct { + /* no return values */ + } set_param; + }; +} __packed; + /* * Set maximum battery charging current. @@ -1831,6 +2263,108 @@ struct ec_params_sb_wr_block { uint16_t data[32]; } __packed; + +/*****************************************************************************/ +/* Battery vendor parameters + * + * Get or set vendor-specific parameters in the battery. Implementations may + * differ between boards or batteries. On a set operation, the response + * contains the actual value set, which may be rounded or clipped from the + * requested value. + */ + +#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4 + +enum ec_battery_vendor_param_mode { + BATTERY_VENDOR_PARAM_MODE_GET = 0, + BATTERY_VENDOR_PARAM_MODE_SET, +}; + +struct ec_params_battery_vendor_param { + uint32_t param; + uint32_t value; + uint8_t mode; +} __packed; + +struct ec_response_battery_vendor_param { + uint32_t value; +} __packed; + +/*****************************************************************************/ +/* + * Smart Battery Firmware Update Commands + */ +#define EC_CMD_SB_FW_UPDATE 0xb5 + +enum ec_sb_fw_update_subcmd { + EC_SB_FW_UPDATE_PREPARE = 0x0, + EC_SB_FW_UPDATE_INFO = 0x1, /*query sb info */ + EC_SB_FW_UPDATE_BEGIN = 0x2, /*check if protected */ + EC_SB_FW_UPDATE_WRITE = 0x3, /*check if protected */ + EC_SB_FW_UPDATE_END = 0x4, + EC_SB_FW_UPDATE_STATUS = 0x5, + EC_SB_FW_UPDATE_PROTECT = 0x6, + EC_SB_FW_UPDATE_MAX = 0x7, +}; + +#define SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE 32 +#define SB_FW_UPDATE_CMD_STATUS_SIZE 2 +#define SB_FW_UPDATE_CMD_INFO_SIZE 8 + +struct ec_sb_fw_update_header { + uint16_t subcmd; /* enum ec_sb_fw_update_subcmd */ + uint16_t fw_id; /* firmware id */ +} __packed; + +struct ec_params_sb_fw_update { + struct ec_sb_fw_update_header hdr; + union { + /* EC_SB_FW_UPDATE_PREPARE = 0x0 */ + /* EC_SB_FW_UPDATE_INFO = 0x1 */ + /* EC_SB_FW_UPDATE_BEGIN = 0x2 */ + /* EC_SB_FW_UPDATE_END = 0x4 */ + /* EC_SB_FW_UPDATE_STATUS = 0x5 */ + /* EC_SB_FW_UPDATE_PROTECT = 0x6 */ + struct { + /* no args */ + } dummy; + + /* EC_SB_FW_UPDATE_WRITE = 0x3 */ + struct { + uint8_t data[SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE]; + } write; + }; +} __packed; + +struct ec_response_sb_fw_update { + union { + /* EC_SB_FW_UPDATE_INFO = 0x1 */ + struct { + uint8_t data[SB_FW_UPDATE_CMD_INFO_SIZE]; + } info; + + /* EC_SB_FW_UPDATE_STATUS = 0x5 */ + struct { + uint8_t data[SB_FW_UPDATE_CMD_STATUS_SIZE]; + } status; + }; +} __packed; + +/* + * Entering Verified Boot Mode Command + * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command. + * Valid Modes are: normal, developer, and recovery. + */ +#define EC_CMD_ENTERING_MODE 0xb6 + +struct ec_params_entering_mode { + int vboot_mode; +} __packed; + +#define VBOOT_MODE_NORMAL 0 +#define VBOOT_MODE_DEVELOPER 1 +#define VBOOT_MODE_RECOVERY 2 + /*****************************************************************************/ /* System commands */ @@ -2020,14 +2554,135 @@ struct ec_params_reboot_ec { * Header bytes greater than this indicate a later version. For example, * EC_CMD_VERSION0 + 1 means we are using version 1. * - * The old EC interface must not use commands 0dc or higher. + * The old EC interface must not use commands 0xdc or higher. */ #define EC_CMD_VERSION0 0xdc +/*****************************************************************************/ +/* + * PD commands + * + * These commands are for PD MCU communication. + */ + +/* EC to PD MCU exchange status command */ +#define EC_CMD_PD_EXCHANGE_STATUS 0x100 + +/* Status of EC being sent to PD */ +struct ec_params_pd_status { + int8_t batt_soc; /* battery state of charge */ +} __packed; + +/* Status of PD being sent back to EC */ +#define PD_STATUS_HOST_EVENT (1 << 0) +struct ec_response_pd_status { + uint32_t status; /* PD MCU status */ + uint32_t curr_lim_ma; /* input current limit */ +} __packed; + +/* Set USB type-C port role and muxes */ +#define EC_CMD_USB_PD_CONTROL 0x101 + +enum usb_pd_control_role { + USB_PD_CTRL_ROLE_NO_CHANGE = 0, + USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */ + USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, + USB_PD_CTRL_ROLE_FORCE_SINK = 3, + USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, + USB_PD_CTRL_ROLE_COUNT +}; + +enum usb_pd_control_mux { + USB_PD_CTRL_MUX_NO_CHANGE = 0, + USB_PD_CTRL_MUX_NONE = 1, + USB_PD_CTRL_MUX_USB = 2, + USB_PD_CTRL_MUX_DP = 3, + USB_PD_CTRL_MUX_DOCK = 4, + USB_PD_CTRL_MUX_AUTO = 5, + USB_PD_CTRL_MUX_COUNT +}; + +struct ec_params_usb_pd_control { + uint8_t port; + uint8_t role; + uint8_t mux; +} __packed; + +struct ec_response_usb_pd_control { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + uint8_t state; +} __packed; + +/* Write USB-PD device FW */ +#define EC_CMD_USB_PD_FW_UPDATE 0x110 + +enum usb_pd_fw_update_cmds { + USB_PD_FW_REBOOT, + USB_PD_FW_FLASH_ERASE, + USB_PD_FW_FLASH_WRITE, + USB_PD_FW_FLASH_HASH, +}; + +struct ec_params_usb_pd_fw_update { + uint8_t cmd; + uint8_t dev_id; + uint8_t port; + uint8_t reserved; /* reserved */ + uint32_t size; /* Size to write in bytes */ + /* Followed by data to write */ +} __packed; + +/* Write USB-PD Accessory RW_HASH table entry */ +#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x111 +#define SHA1_DIGEST_SIZE 20 +struct ec_params_usb_pd_rw_hash_entry { + uint8_t dev_id; + union { + uint8_t b[SHA1_DIGEST_SIZE]; + uint32_t w[SHA1_DIGEST_SIZE/4]; + } dev_rw_hash; +} __packed; + +/* Read USB-PD Accessory info */ +#define EC_CMD_USB_PD_DEV_INFO 0x112 + +struct ec_params_usb_pd_info_request { + uint8_t port; +} __packed; + #endif /* !__ACPI__ */ /*****************************************************************************/ /* + * Passthru commands + * + * Some platforms have sub-processors chained to each other. For example. + * + * AP <--> EC <--> PD MCU + * + * The top 2 bits of the command number are used to indicate which device the + * command is intended for. Device 0 is always the device receiving the + * command; other device mapping is board-specific. + * + * When a device receives a command to be passed to a sub-processor, it passes + * it on with the device number set back to 0. This allows the sub-processor + * to remain blissfully unaware of whether the command originated on the next + * device up the chain, or was passed through from the AP. + * + * In the above example, if the AP wants to send command 0x0002 to the PD MCU, + * AP sends command 0x4002 to the EC + * EC sends command 0x0002 to the PD MCU + * EC forwards PD MCU response back to the AP + */ + +/* Offset and max command number for sub-device n */ +#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n)) +#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff) + +/*****************************************************************************/ +/* * Deprecated constants. These constants have been renamed for clarity. The * meaning and size has not changed. Programs that use the old names should * switch to the new names soon, as the old names may not be carried forward |