summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c108
1 files changed, 6 insertions, 102 deletions
diff --git a/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c b/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c
index 3a80e0121b..2b47baa65e 100644
--- a/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c
+++ b/src/mainboard/hp/pavilion_m6_1035dx/buildOpts.c
@@ -368,72 +368,14 @@ GPIO_CONTROL parmer_gpio[] = {
*/
/*
- * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
- * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
- * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
- * use its default conservative settings.
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform
+ * information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...).
+ * If PlatformSpecificTable is populated, AGESA will base its settings on the
+ * data from the table. Otherwise, it will use its default conservative settings
*/
CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
- //
- // The following macros are supported (use comma to separate macros):
- //
- // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
- // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
- // AGESA will base on this value to disable unused MemClk to save power.
- // Example:
- // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
- // Bit AM3/S1g3 pin name
- // 0 M[B,A]_CLK_H/L[0]
- // 1 M[B,A]_CLK_H/L[1]
- // 2 M[B,A]_CLK_H/L[2]
- // 3 M[B,A]_CLK_H/L[3]
- // 4 M[B,A]_CLK_H/L[4]
- // 5 M[B,A]_CLK_H/L[5]
- // 6 M[B,A]_CLK_H/L[6]
- // 7 M[B,A]_CLK_H/L[7]
- // And platform has the following routing:
- // CS0 M[B,A]_CLK_H/L[4]
- // CS1 M[B,A]_CLK_H/L[2]
- // CS2 M[B,A]_CLK_H/L[3]
- // CS3 M[B,A]_CLK_H/L[5]
- // Then platform can specify the following macro:
- // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
- //
- // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
- // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
- // AGESA will base on this value to tristate unused CKE to save power.
- //
- // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
- // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
- // AGESA will base on this value to tristate unused ODT pins to save power.
- //
- // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
- // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
- // AGESA will base on this value to tristate unused Chip select to save power.
- //
- // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
- // Specifies the number of DIMM slots per channel.
- //
- // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
- // Specifies the number of Chip selects per channel.
- //
- // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
- // Specifies the number of channels per socket.
- //
- // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
- // Specifies DDR bus speed of channel ChannelID on socket SocketID.
- //
- // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
- // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
- //
- // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
- // Byte6Seed, Byte7Seed, ByteEccSeed)
- // Specifies the write leveling seed for a channel of a socket.
- //
- // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
- // Byte6Seed, Byte7Seed, ByteEccSeed)
- // Speicifes the HW RXEN training seed for a channel of a socket
- //
+
NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1),
NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
@@ -447,44 +389,6 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
// Customer table
UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] =
{
- // Hardcoded Memory Training Values
-
- // The following macro should be used to override training values for your platform
- //
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
- //
- // NOTE:
- // The following training hardcode values are example values that were taken from a tilapia motherboard
- // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in
- // the table and replace the byte lane values with your own.
- //
- // ------------------ BYTE LANES ----------------------
- // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC
- // Write Data Timing
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
- // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
-
- // DQS Receiver Enable
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
- // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
-
- // Write DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
-
- // Read DQS Delays
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
- // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
- //--------------------------------------------------------------------------------------------------------------------------------------------------
- // TABLE END
NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table
};
UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]);