summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/Kconfig64
-rw-r--r--src/arch/i386/Kconfig23
-rw-r--r--src/arch/ppc/Kconfig9
-rw-r--r--src/console/Kconfig67
-rw-r--r--src/devices/Kconfig55
-rw-r--r--src/mainboard/Kconfig10
6 files changed, 155 insertions, 73 deletions
diff --git a/src/Kconfig b/src/Kconfig
index 273d770a5f..6458037497 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -30,10 +30,15 @@ mainmenu "Coreboot Configuration"
menu "General setup"
config LOCALVERSION
- string "Local version - append to coreboot release"
+ string "Local version string"
help
Append an extra string to the end of the coreboot version.
+ This can be useful if, for instance, you want to append the
+ respective board's hostname or some other identifying string to
+ the coreboot version number, so that you can easily distinguish
+ boot logs of different boards from each other.
+
endmenu
source src/mainboard/Kconfig
@@ -225,10 +230,10 @@ config GFXUMA
# TODO
# menu "Drivers"
-#
+#
# endmenu
-menu "Generated System Tables"
+menu "System tables"
config HAVE_LOW_TABLES
bool
@@ -239,7 +244,7 @@ config HAVE_HIGH_TABLES
default y
config MULTIBOOT
- bool "Add Multiboot tables (for grub2)"
+ bool "Generate Multiboot tables (for GRUB2)"
default n
config HAVE_ACPI_TABLES
@@ -258,16 +263,22 @@ endmenu
menu "Payload"
-config COMPRESSED_PAYLOAD_LZMA
- bool "Use LZMA compression for payloads"
- default yes
-
choice
- prompt "Payload type"
+ prompt "Add a payload"
default PAYLOAD_NONE
+config PAYLOAD_NONE
+ bool "None"
+ help
+ Select this option if you want to create an "empty" coreboot
+ ROM image for a certain mainboard, i.e. a coreboot ROM image
+ which does not yet contain a payload.
+
+ For such an image to be useful, you have to use 'cbfstool'
+ to add a payload to the ROM image later.
+
config PAYLOAD_ELF
- bool "An ELF executable payload file"
+ bool "An ELF executable payload"
help
Select this option if you have a payload image (an ELF file)
which coreboot should run as soon as the basic hardware
@@ -275,15 +286,6 @@ config PAYLOAD_ELF
You will be able to specify the location and file name of the
payload image later.
-config PAYLOAD_NONE
- bool "No payload"
- help
- Select this option if you want to create an "empty" coreboot
- ROM image for a certain mainboard, i.e. a coreboot ROM image
- which does not yet contain a payload.
-
- For such an image to be useful, you have to use the 'cbfs' tool
- to add a payload to the ROM image later.
endchoice
@@ -294,6 +296,15 @@ config FALLBACK_PAYLOAD_FILE
help
The path and filename of the ELF executable file to use as payload.
+# TODO: Defined if no payload? Breaks build?
+config COMPRESSED_PAYLOAD_LZMA
+ bool "Use LZMA compression for payloads"
+ default y
+ depends on PAYLOAD_ELF
+ help
+ In order to reduce the size payloads take up in the ROM chip
+ coreboot can compress them using the LZMA algorithm.
+
endmenu
menu "VGA BIOS"
@@ -319,11 +330,20 @@ config FALLBACK_VGA_BIOS_ID
depends on VGA_BIOS
default "1106,3230"
help
- The ID that would associate your VGA BIOS to your video card.
- (PCI VendorID, PCI Device ID)
+ The comma-separated PCI vendor and device ID that would associate
+ your VGA BIOS to your video card.
+
+ Example: 1106,3230
+
+ In the above example 1106 is the PCI vendor ID (in hex, but without
+ the "0x" prefix) and 3230 specifies the PCI device ID of the
+ video card (also in hex, without "0x" prefix).
endmenu
+menu "Debugging"
+
+# TODO: Better help text and detailed instructions.
config GDB_STUB
bool "GDB debugging support"
default y
@@ -331,3 +351,5 @@ config GDB_STUB
If enabled, you will be able to set breakpoints for gdb debugging.
See src/arch/i386/lib/c_start.S for details.
+endmenu
+
diff --git a/src/arch/i386/Kconfig b/src/arch/i386/Kconfig
index 2e2f650f06..8481cf6f06 100644
--- a/src/arch/i386/Kconfig
+++ b/src/arch/i386/Kconfig
@@ -1,23 +1,22 @@
+# This option is used to set the architecture of a mainboard to X86.
+# It is usually set in mainboard/*/Kconfig.
config ARCH_X86
bool
- help
- This option is used to set the architecture of a mainboard.
- It is usually set in mainboard/*/Kconfig.
+ default n
+# This is an SMP option. It relates to starting up APs.
+# It is usually set in mainboard/*/Kconfig.
+# TODO: Improve description.
config AP_IN_SIPI_WAIT
bool
default n
depends on ARCH_X86
- help
- This is an SMP option. It relates to starting up APs.
- It is usually set in mainboard/*/Kconfig.
+# This is the name of the respective architecture subdirectory in arch/.
config ARCH
string
default i386
depends on ARCH_X86
- help
- This is the name of the respective subdirectory in arch/.
config ROMBASE
hex
@@ -58,11 +57,9 @@ config STACK_SIZE
hex
default 0x8000
-menu "Misc options"
-
+# Maximum reboot count
+# TODO: Improve description.
config MAX_REBOOT_CNT
- int "Maximum reboot count"
+ int
default 3
-endmenu
-
diff --git a/src/arch/ppc/Kconfig b/src/arch/ppc/Kconfig
index 66a90515fb..1916433f9e 100644
--- a/src/arch/ppc/Kconfig
+++ b/src/arch/ppc/Kconfig
@@ -1,13 +1,12 @@
+# This option is used to set the architecture of a mainboard to PowerPC.
+# It is usually set in mainboard/*/Kconfig.
config ARCH_POWERPC
bool
- help
- This option is used to set the architecture of a mainboard.
- It is usually set in mainboard/*/Kconfig.
+ default n
+# This is the name of the respective architecture subdirectory in arch/.
config ARCH
string
default ppc
depends on ARCH_POWERPC
- help
- This is the name of the respective subdirectory in arch/.
diff --git a/src/console/Kconfig b/src/console/Kconfig
index 697e3587fe..2bdffc1aff 100644
--- a/src/console/Kconfig
+++ b/src/console/Kconfig
@@ -1,53 +1,96 @@
menu "Console options"
+# TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete.
config CONSOLE_SERIAL8250
- #TODO Rename to SERIAL_CONSOLE once Kconfig transition is complete.
- bool "See output on the serial port console"
+ bool "Enable serial port console output"
default y
+ help
+ Send coreboot debug output to a serial port console.
-config SERIAL_POST
- bool "See POST output on the serial port console"
- default n
-
+# TODO: COM1, COM2 etc.
config TTYS0_BASE
hex "I/O base for the serial port"
depends on CONSOLE_SERIAL8250
default 0x3f8
config SERIAL_SET_SPEED
- bool "Override the serial console BAUD rate"
+ bool "Override the serial port BAUD rate"
default y
depends on CONSOLE_SERIAL8250
config TTYS0_BAUD
- int "Serial console BAUD rate"
+ int "Serial port BAUD rate"
depends on SERIAL_SET_SPEED
default 115200
+# TODO: Allow user-friendly selection of settings other than 8n1.
config TTYS0_LCS
int
default 3
depends on CONSOLE_SERIAL8250
+config SERIAL_POST
+ bool "Enable POST output on the serial port console"
+ depends on CONSOLE_SERIAL8250
+ default n
+ help
+ If enabled, coreboot will additionally print POST codes (which are
+ usually displayed using a so-called "POST card" ISA/PCI/PCI-E
+ device) on the serial console.
+
+# TODO: FIX DEPENDENCY HERE
config USBDEBUG_DIRECT
- bool "USB debug dongle support. Not supported on all chipsets."
+ bool "USB 2.0 EHCI debug dongle support"
default n
- # TODO: FIX DEPENDENCY HERE
+ help
+ This option allows you to use a so-called USB EHCI Debug device
+ to retrieve the coreboot debug messages (instead, or in addition
+ to, a serial port).
+
+ This feature is NOT supported on all chipsets in coreboot!
+
+ It also requires a USB2 controller which supports the EHCI
+ Debug Port capability. Controllers which are known to work:
+
+ * 10b9:5239 ALi Corporation USB 2.0 (USB PCI card)
+ * 8086:24cd Intel ICH4/ICH4-M
+ * 8086:24dd Intel ICH5
+ * 8086:265c Intel ICH6
+ * 8086:268c Intel 631xESB/632xESB/3100
+ * 8086:27cc Intel ICH7
+ * 8086:2836 Intel ICH8
+ * 8086:283a Intel ICH8
+ * 8086:293a Intel ICH9
+ * 10de:0088 NVIDIA MCP2A
+ * 10de:005b NVIDIA CK804
+ * 10de:026e NVIDIA MCP51
+ * 10de:036d NVIDIA MCP55
+ * 10de:03f2 NVIDIA MCP61
+ * 1002:4386 ATI/AMD SB600
+ * 1106:3104 VIA VX800
+
+ See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list.
config CONSOLE_VGA
- bool "Use VGA console, once initialized."
+ bool "Use VGA console once initialized"
default n
+# TODO: Deps?
+# TODO: Improve description.
config CONSOLE_VGA_ONBOARD_AT_FIRST
- bool "Use onboard VGA as primary"
+ bool "Use onboard VGA as primary video device"
default n
help
If not selected, the last adapter found will be used.
+# TODO: User-friendly "choice" selection.
+# TODO: Add help text.
config MAXIMUM_CONSOLE_LOGLEVEL
int "Maximum console loglevel"
default 9
+# TODO: User-friendly "choice" selection.
+# TODO: Add help text.
config DEFAULT_CONSOLE_LOGLEVEL
int "Default console loglevel"
default 9
diff --git a/src/devices/Kconfig b/src/devices/Kconfig
index 173ae9df94..1bfd2d289b 100644
--- a/src/devices/Kconfig
+++ b/src/devices/Kconfig
@@ -24,43 +24,58 @@ config VGA_BRIDGE_SETUP
bool "Setup bridges on path to VGA adapter"
default y
help
- Allow bridges to set up legacy decoding ranges for VGA. Don't disable
+ Allow bridges to set up legacy decoding ranges for VGA. Don't disable
this unless you're sure you don't want the briges setup for VGA.
+# TODO: Explain differences (if any) for onboard cards.
config VGA_ROM_RUN
- bool "Run VGA Option ROMs"
+ bool "Run VGA option ROMs"
+ default y
help
- Execute VGA option ROMs if found. This is required to enable PCI/AGP
- VGA plugin cards.
+ Execute VGA option ROMs, if found. This is required to enable
+ PCI/AGP/PCI-E video cards.
config PCI_ROM_RUN
- bool "Run non-VGA Option ROMs"
+ bool "Run non-VGA option ROMs"
+ default y
help
- Execute non-VGA PCI option ROMs if found.
+ Execute non-VGA PCI option ROMs, if found.
+
+ Examples include IDE/SATA controller option ROMs and option ROMs
+ for network cards (NICs).
+# TODO: Describe YABEL vs. x86emu differences in more detail.
choice
- prompt "Option ROM Execution"
- default PCI_OPTION_ROM_RUN_REALMODE
+ prompt "Option ROM execution type"
+ default PCI_OPTION_ROM_RUN_REALMODE
depends on PCI_ROM_RUN || VGA_ROM_RUN
+
+config PCI_OPTION_ROM_RUN_REALMODE
+ prompt "Real mode"
+ bool
help
- You can choose to execute PCI option ROMs natively (32bit x86 system
- required) or in an emulator (x86emu or YABEL).
+ If you select this option, PCI option ROMs will be executed
+ natively on the hardware (a 32bit x86 system is required).
- config PCI_OPTION_ROM_RUN_REALMODE
- prompt "Real mode"
- bool
+config PCI_OPTION_ROM_RUN_YABEL
+ prompt "YABEL"
+ bool
+ help
+ If you select this option, the YABEL BIOS emulator will be used to
+ execute PCI option ROMs.
- config PCI_OPTION_ROM_RUN_YABEL
- prompt "YABEL"
- bool
+config PCI_OPTION_ROM_RUN_X86EMU
+ prompt "x86emu"
+ bool
+ help
+ If you select this option, the x86emu BIOS emulator will be used to
+ execute PCI option ROMs.
- config PCI_OPTION_ROM_RUN_X86EMU
- prompt "X86EMU"
- bool
endchoice
+# TODO: Describe better, and/or make a "choice" selection for this.
config YABEL_DEBUG_FLAGS
- prompt "Hex value for debug flags"
+ prompt "Hex value for YABEL debug flags"
hex
default 0x0
depends on PCI_OPTION_ROM_RUN_YABEL
diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig
index 9f7f8e42d5..a96b42a986 100644
--- a/src/mainboard/Kconfig
+++ b/src/mainboard/Kconfig
@@ -370,9 +370,15 @@ source "src/mainboard/thomson/Kconfig"
source "src/mainboard/tyan/Kconfig"
source "src/mainboard/via/Kconfig"
+# TODO: No help text possible for choice fields?
choice
prompt "ROM chip size"
default COREBOOT_ROMSIZE_KB_256
+ help
+ Select the size of the ROM chip you intend to flash coreboot on.
+
+ The build system will take care of creating a coreboot.rom file
+ of the matching size.
config COREBOOT_ROMSIZE_KB_128
bool "128 KB"
@@ -406,6 +412,7 @@ config COREBOOT_ROMSIZE_KB_4096
endchoice
+# Map the config names to an integer (KB).
config COREBOOT_ROMSIZE_KB
int
default 128 if COREBOOT_ROMSIZE_KB_128
@@ -414,9 +421,8 @@ config COREBOOT_ROMSIZE_KB
default 1024 if COREBOOT_ROMSIZE_KB_1024
default 2048 if COREBOOT_ROMSIZE_KB_2048
default 4096 if COREBOOT_ROMSIZE_KB_4096
- help
- Map the config names to an integer.
+# Map the config names to a hex value (bytes).
config ROM_SIZE
hex
default 0x20000 if COREBOOT_ROMSIZE_KB_128