3 files changed, 59 insertions, 0 deletions
diff --git a/src/superio/ite/it8772f/chip.h b/src/superio/ite/it8772f/chip.h
index 78ded22b5d..0d80fb833c 100644
--- a/src/superio/ite/it8772f/chip.h
+++ b/src/superio/ite/it8772f/chip.h
@@ -18,6 +18,7 @@
 #define SUPERIO_ITE_IT8772F_CHIP_H
 
 #include <device/device.h>
+#include "it8772f.h"
 
 struct superio_ite_it8772f_config {
 	/* GPIO SimpleIO register values via devicetree.cb */
@@ -37,6 +38,12 @@ struct superio_ite_it8772f_config {
 	u8 peci_tmpin;
 
 	/*
+	 * Enable thermal mode on tmpinx.
+	 */
+	enum thermal_mode tmpin1_mode;
+	enum thermal_mode tmpin2_mode;
+
+	/*
 	 * Enable a FAN for sofware control.
 	 */
 	u8 fan1_enable;
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h
index 8e82bef6ab..2031fffda8 100644
--- a/src/superio/ite/it8772f/it8772f.h
+++ b/src/superio/ite/it8772f/it8772f.h
@@ -17,6 +17,13 @@
 #ifndef SUPERIO_ITE_IT8772F_H
 #define SUPERIO_ITE_IT8772F_H
 
+/* Supported thermal mode on TMPINx */
+enum thermal_mode {
+	THERMAL_MODE_DISABLED	= 0,
+	THERMAL_DIODE,
+	THERMAL_RESISTOR,
+};
+
 #define IT8772F_FDC  0x00 /* Floppy disk controller */
 #define IT8772F_SP1  0x01 /* Com1 */
 #define IT8772F_EC   0x04 /* Environment controller */
@@ -26,6 +33,7 @@
 #define IT8772F_IR   0x0a /* Consumer IR */
 
 /* Environmental Controller interface */
+#define IT8772F_CONFIGURATION			0x00
 #define IT8772F_INTERFACE_SELECT		0x0a
 #define  IT8772F_INTERFACE_PSEUDO_EOC		(1 << 7)
 #define  IT8772F_INTERFACE_SMB_ENABLE		(1 << 6)
diff --git a/src/superio/ite/it8772f/superio.c b/src/superio/ite/it8772f/superio.c
index 7079b1a829..2d897d83ba 100644
--- a/src/superio/ite/it8772f/superio.c
+++ b/src/superio/ite/it8772f/superio.c
@@ -16,6 +16,7 @@
 
 #include <device/device.h>
 #include <device/pnp.h>
+#include <console/console.h>
 #include <pc80/keyboard.h>
 #include <arch/io.h>
 #include <delay.h>
@@ -97,6 +98,43 @@ static void it8772f_enable_peci(struct resource *res, int tmpin)
 }
 
 /*
+ * Set up External Temperature to read via thermal diode/resistor
+ * into TMPINx register
+ */
+static void it8772f_enable_tmpin(struct resource *res, int tmpin,
+				enum thermal_mode mode)
+{
+	u8 reg;
+
+	if (tmpin != 1 && tmpin != 2)
+		return;
+
+	reg = it8772f_envc_read(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE);
+
+	switch (mode) {
+	case THERMAL_DIODE:
+		/* Thermal Diode Mode */
+		it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
+				   reg | tmpin);
+		break;
+	case THERMAL_RESISTOR:
+		/* Thermal Resistor Mode */
+		it8772f_envc_write(res, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
+				   reg | (tmpin << 3));
+		break;
+	default:
+		printk(BIOS_ERR, "Unsupported thermal mode 0x%x on TMPIN%d\n",
+			mode, tmpin);
+		return;
+	}
+
+	reg = it8772f_envc_read(res, IT8772F_CONFIGURATION);
+
+	/* Enable the startup of monitoring operation */
+	it8772f_envc_write(res, IT8772F_CONFIGURATION, reg | 0x01);
+}
+
+/*
  * Setup a FAN PWM interface for software control
  */
 static void it8772f_enable_fan(struct resource *res, int fan)
@@ -160,6 +198,12 @@ static void it8772f_init(struct device *dev)
 		/* Enable PECI if configured */
 		it8772f_enable_peci(res, conf->peci_tmpin);
 
+		/* Enable HWM if configured */
+		if (conf->tmpin1_mode != THERMAL_MODE_DISABLED)
+			it8772f_enable_tmpin(res, 1, conf->tmpin1_mode);
+		if (conf->tmpin2_mode != THERMAL_MODE_DISABLED)
+			it8772f_enable_tmpin(res, 2, conf->tmpin2_mode);
+
 		/* Enable FANx if configured */
 		if (conf->fan1_enable)
 			it8772f_enable_fan(res, 1);