diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/google/kahlee/OemCustomize.c | 26 | ||||
| -rw-r--r-- | src/mainboard/google/kahlee/variants/baseboard/gpio.c | 6 | ||||
| -rw-r--r-- | src/soc/amd/stoneyridge/chip.h | 9 |
3 files changed, 38 insertions, 3 deletions
diff --git a/src/mainboard/google/kahlee/OemCustomize.c b/src/mainboard/google/kahlee/OemCustomize.c index a0bd8cddbd..12e50724ec 100644 --- a/src/mainboard/google/kahlee/OemCustomize.c +++ b/src/mainboard/google/kahlee/OemCustomize.c @@ -16,6 +16,9 @@ #include <chip.h> #include <amdblocks/agesawrapper.h> #include <boardid.h> +#include <gpio.h> +#include <console/console.h> +#include <soc/pci_devs.h> #define DIMMS_PER_CHANNEL 1 #if DIMMS_PER_CHANNEL > MAX_DIMMS_PER_CH @@ -75,5 +78,28 @@ void OemPostParams(AMD_POST_PARAMS *PostParams) void set_board_env_params(GNB_ENV_CONFIGURATION *params) { + const struct soc_amd_stoneyridge_config *cfg; + const struct device *dev = dev_find_slot(0, GNB_DEVFN); + if (!dev || !dev->chip_info) { + printk(BIOS_WARNING, "Warning: Cannot find SoC devicetree config\n"); + return; + } + cfg = dev->chip_info; + if (cfg->lvds_poseq_blon_to_varybl && cfg->lvds_poseq_varybl_to_blon) { + /* + * GPIO 133 - Backlight enable (active low) + * Pass control of the backlight to the video BIOS + */ + gpio_set(GPIO_133, 0); + printk(BIOS_INFO, "Change panel init timing\n"); + params->LvdsPowerOnSeqVaryBlToBlon = + cfg->lvds_poseq_varybl_to_blon; + params->LvdsPowerOnSeqBlonToVaryBl = + cfg->lvds_poseq_blon_to_varybl; + printk(BIOS_INFO, "LvdsPowerOnSeqVaryBlToBlon: %dms\n", + (params->LvdsPowerOnSeqVaryBlToBlon)*4); + printk(BIOS_INFO, "LvdsPowerOnSeqBlonToVaryBl: %dms\n", + (params->LvdsPowerOnSeqBlonToVaryBl)*4); + } params->EDPv1_4VSMode = EDP_VS_HIGH_VDIFF_MODE; } diff --git a/src/mainboard/google/kahlee/variants/baseboard/gpio.c b/src/mainboard/google/kahlee/variants/baseboard/gpio.c index 6095a08af0..f6bc83c4e2 100644 --- a/src/mainboard/google/kahlee/variants/baseboard/gpio.c +++ b/src/mainboard/google/kahlee/variants/baseboard/gpio.c @@ -77,6 +77,9 @@ static const struct soc_amd_gpio gpio_set_stage_reset[] = { /* GPIO_132 - CONFIG_STRAP4 */ PAD_GPI(GPIO_132, PULL_NONE), + /* GPIO_133 - APU_EDP_BKLTEN_L (backlight - Active LOW) */ + PAD_GPO(GPIO_133, HIGH), + /* GPIO_136 - UART_PCH_RX_DEBUG_TX */ PAD_NF(GPIO_136, UART0_RXD, PULL_NONE), @@ -217,9 +220,6 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = { /* GPIO_130 - Unused (TP55) */ PAD_GPI(GPIO_130, PULL_UP), - /* GPIO_133 - APU_EDP_BKLTEN_L (backlight - Active LOW) */ - PAD_GPO(GPIO_133, HIGH), - /* GPIO_135 - BCLK Buffer Enable */ PAD_GPO(GPIO_135, HIGH), diff --git a/src/soc/amd/stoneyridge/chip.h b/src/soc/amd/stoneyridge/chip.h index 320bef0bdf..92223d1962 100644 --- a/src/soc/amd/stoneyridge/chip.h +++ b/src/soc/amd/stoneyridge/chip.h @@ -63,6 +63,15 @@ struct soc_amd_stoneyridge_config { u8 stapm_percent; u32 stapm_time_ms; u32 stapm_power_mw; + /* + * This specifies the LVDS/eDP power-up sequence time for the delay + * between VaryBL and BLON. + * 0 - Use the VBIOS default (default). The video BIOS default is 32ms. + * n - Values other than zero specify a setting of (4 * n) milliseconds + * time delay. + */ + u8 lvds_poseq_varybl_to_blon; + u8 lvds_poseq_blon_to_varybl; }; typedef struct soc_amd_stoneyridge_config config_t; |