summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/devices/oprom/x86.c87
-rw-r--r--src/devices/oprom/x86_asm.S222
-rw-r--r--src/northbridge/via/cx700/cx700_vga.c14
-rw-r--r--src/northbridge/via/cx700/northbridge.h4
-rw-r--r--src/northbridge/via/vt8623/northbridge.h4
-rw-r--r--src/northbridge/via/vt8623/vga.c18
-rw-r--r--src/northbridge/via/vx800/northbridge.h3
-rw-r--r--src/northbridge/via/vx800/vga.c16
8 files changed, 203 insertions, 165 deletions
diff --git a/src/devices/oprom/x86.c b/src/devices/oprom/x86.c
index 4d9604a581..42267faa5f 100644
--- a/src/devices/oprom/x86.c
+++ b/src/devices/oprom/x86.c
@@ -34,12 +34,45 @@ struct realmode_idt {
void x86_exception(struct eregs *info);
+/* From x86_asm.S */
extern unsigned char __idt_handler, __idt_handler_size;
extern unsigned char __realmode_code, __realmode_code_size;
-extern unsigned char __run_optionrom, __run_interrupt;
+extern unsigned char __realmode_call, __realmode_interrupt;
-void (*run_optionrom)(u32 devfn) __attribute__((regparm(0))) = (void *)&__run_optionrom;
-void (*vga_enable_console)(void) __attribute__((regparm(0))) = (void *)&__run_interrupt;
+void (*realmode_call)(u32 addr, u32 eax, u32 ebx, u32 ecx, u32 edx,
+ u32 esi, u32 edi) __attribute__((regparm(0))) = (void *)&__realmode_call;
+
+void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx,
+ u32 esi, u32 edi) __attribute__((regparm(0))) = (void *)&__realmode_interrupt;
+
+#define FAKE_MEMORY_SIZE (1024*1024) // only 1MB
+#define INITIAL_EBDA_SEGMENT 0xF600
+#define INITIAL_EBDA_SIZE 0x400
+
+static void setup_bda(void)
+{
+ /* clear BIOS DATA AREA */
+ memset((void *)0x400, 0, 0x200);
+
+ write16(0x413, FAKE_MEMORY_SIZE / 1024);
+ write16(0x40e, INITIAL_EBDA_SEGMENT);
+
+ /* Set up EBDA */
+ memset((void *)(INITIAL_EBDA_SEGMENT << 4), 0, INITIAL_EBDA_SIZE);
+ write16((INITIAL_EBDA_SEGMENT << 4) + 0x0, INITIAL_EBDA_SIZE / 1024);
+}
+
+static void setup_rombios(void)
+{
+ const char date[] = "06/11/99";
+ memcpy((void *)0xffff5, &date, 8);
+
+ const char ident[] = "PCI_ISA";
+ memcpy((void *)0xfffd9, &ident, 7);
+
+ /* system model: IBM-AT */
+ write8(0xffffe, 0xfc);
+}
int (*intXX_handler[256])(struct eregs *regs) = { NULL };
@@ -47,7 +80,12 @@ static int intXX_exception_handler(struct eregs *regs)
{
printk(BIOS_INFO, "Oops, exception %d while executing option rom\n",
regs->vector);
+#if 0
+ // Odd: The i945GM VGA oprom chokes on a pushl %eax and will
+ // die with an exception #6 if we run the coreboot exception
+ // handler. Just continue, as it executes fine.
x86_exception(regs); // Call coreboot exception handler
+#endif
return 0; // Never returns?
}
@@ -138,20 +176,38 @@ static void setup_realmode_idt(void)
/* int42 is the relocated int10 */
write_idt_stub((void *)0xff065, 0x42);
-
- /* VIA's VBIOS calls f000:f859 instead of int15 */
+ /* BIOS Int 11 Handler F000:F84D */
+ write_idt_stub((void *)0xff84d, 0x11);
+ /* BIOS Int 12 Handler F000:F841 */
+ write_idt_stub((void *)0xff841, 0x12);
+ /* BIOS Int 13 Handler F000:EC59 */
+ write_idt_stub((void *)0xfec59, 0x13);
+ /* BIOS Int 14 Handler F000:E739 */
+ write_idt_stub((void *)0xfe739, 0x14);
+ /* BIOS Int 15 Handler F000:F859 */
write_idt_stub((void *)0xff859, 0x15);
+ /* BIOS Int 16 Handler F000:E82E */
+ write_idt_stub((void *)0xfe82e, 0x16);
+ /* BIOS Int 17 Handler F000:EFD2 */
+ write_idt_stub((void *)0xfefd2, 0x17);
+ /* ROM BIOS Int 1A Handler F000:FE6E */
+ write_idt_stub((void *)0xffe6e, 0x1a);
}
void run_bios(struct device *dev, unsigned long addr)
{
- /* clear vga bios data area */
- memset((void *)0x400, 0, 0x200);
+ u32 num_dev = (dev->bus->secondary << 8) | dev->path.pci.devfn;
+
+ /* Set up BIOS Data Area */
+ setup_bda();
+
+ /* Set up some legacy information in the F segment */
+ setup_rombios();
/* Set up C interrupt handlers */
setup_interrupt_handlers();
- /* Setting up realmode IDT */
+ /* Set up real-mode IDT */
setup_realmode_idt();
memcpy(REALMODE_BASE, &__realmode_code, (size_t)&__realmode_code_size);
@@ -159,7 +215,9 @@ void run_bios(struct device *dev, unsigned long addr)
(u32)&__realmode_code_size);
printk(BIOS_DEBUG, "Calling Option ROM...\n");
- run_optionrom((dev->bus->secondary << 8) | dev->path.pci.devfn);
+ /* TODO ES:DI Pointer to System BIOS PnP Installation Check Structure */
+ /* Option ROM entry point is at OPROM start + 3 */
+ realmode_call(addr + 0x0003, num_dev, 0xffff, 0x0000, 0xffff, 0x0, 0x0);
printk(BIOS_DEBUG, "... Option ROM returned.\n");
}
@@ -168,9 +226,6 @@ void run_bios(struct device *dev, unsigned long addr)
#include <cpu/amd/vr.h>
#include <cbfs.h>
-extern unsigned char __run_vsa;
-void (*run_vsa)(u32 smm, u32 sysmem) __attribute__((regparm(0))) = (void *)&__run_vsa;
-
#define VSA2_BUFFER 0x60000
#define VSA2_ENTRY_POINT 0x60020
@@ -198,9 +253,6 @@ void do_vsmbios(void)
{
printk(BIOS_DEBUG, "Preparing for VSA...\n");
- /* clear bios data area */
- memset((void *)0x400, 0, 0x200);
-
/* Set up C interrupt handlers */
setup_interrupt_handlers();
@@ -229,8 +281,11 @@ void do_vsmbios(void)
}
printk(BIOS_DEBUG, "Calling VSA module...\n");
+
/* ECX gets SMM, EDX gets SYSMEM */
- run_vsa(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM);
+ realmode_call(VSA2_ENTRY_POINT, 0x0, 0x0, MSR_GLIU0_SMM,
+ MSR_GLIU0_SYSMEM, 0x0, 0x0);
+
printk(BIOS_DEBUG, "... VSA module returned.\n");
/* Restart timer 1 */
diff --git a/src/devices/oprom/x86_asm.S b/src/devices/oprom/x86_asm.S
index 469c42f90b..ee7c5faaab 100644
--- a/src/devices/oprom/x86_asm.S
+++ b/src/devices/oprom/x86_asm.S
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2009-2010 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -57,21 +57,49 @@ __realmode_idt = RELOCATED(.)
__stack = RELOCATED(.)
.long 0
+/* Register store for realmode_call and realmode_interrupt */
+__registers = RELOCATED(.)
+ .long 0 /* 0x00 - EAX */
+ .long 0 /* 0x04 - EBX */
+ .long 0 /* 0x08 - ECX */
+ .long 0 /* 0x0c - EDX */
+ .long 0 /* 0x10 - EDI */
+ .long 0 /* 0x14 - ESI */
+
.code32
- .globl __run_optionrom
-__run_optionrom = RELOCATED(.)
+ .globl __realmode_call
+__realmode_call = RELOCATED(.)
/* save all registers to the stack */
pushal
/* Move the protected mode stack to a safe place */
- mov %esp, __stack
-
- /* Get devfn into %ecx */
+ movl %esp, __stack
movl %esp, %ebp
+
/* This function is called with regparm=0 and we have
- * to skip the 32 byte from pushal:
+ * to skip the 32 byte from pushal. Hence start at 36.
*/
- movl 36(%ebp), %ecx
+
+ /* entry point */
+ movl 36(%ebp), %eax
+ movw %ax, __lcall_instr + 1
+ andl $0xffff0000, %eax
+ shrl $4, %eax
+ movw %ax, __lcall_instr + 3
+
+ /* initial register values */
+ movl 40(%ebp), %eax
+ movl %eax, __registers + 0x00 /* eax */
+ movl 44(%ebp), %eax
+ movl %eax, __registers + 0x04 /* ebx */
+ movl 48(%ebp), %eax
+ movl %eax, __registers + 0x08 /* ecx */
+ movl 52(%ebp), %eax
+ movl %eax, __registers + 0x0c /* edx */
+ movl 56(%ebp), %eax
+ movl %eax, __registers + 0x10 /* esi */
+ movl 60(%ebp), %eax
+ movl %eax, __registers + 0x14 /* esi */
/* Activate the right segment descriptor real mode. */
ljmp $0x28, $RELOCATED(1f)
@@ -120,11 +148,18 @@ __run_optionrom = RELOCATED(.)
mov $0x40, %ax
mov %ax, %ds
+ /* initialize registers for option rom lcall */
+ movl __registers + 0, %eax
+ movl __registers + 4, %ebx
+ movl __registers + 8, %ecx
+ movl __registers + 12, %edx
+ movl __registers + 16, %esi
+ movl __registers + 20, %edi
+
/* ************************************ */
- mov %cx, %ax // restore ax
- // TODO this will not work for non-VGA option ROMs
- /* run VGA BIOS at 0xc000:0003 */
- lcall $0xc000, $0x0003
+__lcall_instr = RELOCATED(.)
+ .byte 0x9a
+ .word 0x0000, 0x0000
/* ************************************ */
/* If we got here, just about done.
@@ -151,126 +186,47 @@ __run_optionrom = RELOCATED(.)
lidt idtarg
/* and exit */
- mov __stack, %esp
+ movl __stack, %esp
popal
- ret
-#if defined(CONFIG_GEODE_VSA) && CONFIG_GEODE_VSA
-#define VSA2_ENTRY_POINT 0x60020
+ // TODO return AX from OPROM call
+ ret
- .globl __run_vsa
-__run_vsa = RELOCATED(.)
+ .globl __realmode_interrupt
+__realmode_interrupt = RELOCATED(.)
/* save all registers to the stack */
pushal
-
- /* Move the protected mode stack to a safe place */
- mov %esp, __stack
-
+ /* save the stack */
+ movl %esp, __stack
movl %esp, %ebp
- /* This function is called with regparm=0 and we have
- * to skip the 32 byte from pushal:
- */
- movl 36(%ebp), %ecx
- movl 40(%ebp), %edx
-
- /* Activate the right segment descriptor real mode. */
- ljmp $0x28, $RELOCATED(1f)
-1:
-.code16
- /* 16 bit code from here on... */
-
- /* Load the segment registers w/ properly configured
- * segment descriptors. They will retain these
- * configurations (limits, writability, etc.) once
- * protected mode is turned off.
- */
- mov $0x30, %ax
- mov %ax, %ds
- mov %ax, %es
- mov %ax, %fs
- mov %ax, %gs
- mov %ax, %ss
-
- /* Turn off protection */
- movl %cr0, %eax
- andl $~PE, %eax
- movl %eax, %cr0
-
- /* Now really going into real mode */
- ljmp $0, $RELOCATED(1f)
-1:
- /* Setup a stack: Put the stack at the end of page zero.
- * That way we can easily share it between real and
- * protected, since the 16 bit ESP at segment 0 will
- * work for any case. */
- mov $0x0, %ax
- mov %ax, %ss
- movl $0x1000, %eax
- movl %eax, %esp
- /* Load our 16 bit idt */
- xor %ax, %ax
- mov %ax, %ds
- lidt __realmode_idt
-
- /* Set all segments to 0x0000, ds to 0x0040 */
- mov %ax, %es
- mov %ax, %fs
- mov %ax, %gs
- mov $0x40, %ax
- mov %ax, %ds
- mov %cx, %ax // restore ax
-
- /* ************************************ */
- lcall $((VSA2_ENTRY_POINT & 0xffff0000) >> 4), $(VSA2_ENTRY_POINT & 0xffff)
- /* ************************************ */
-
- /* If we got here, just about done.
- * Need to get back to protected mode
+ /* This function is called with regparm=0 and we have
+ * to skip the 32 byte from pushal. Hence start at 36.
*/
- movl %cr0, %eax
- orl $PE, %eax
- movl %eax, %cr0
-
- /* Now that we are in protected mode
- * jump to a 32 bit code segment.
- */
- data32 ljmp $0x10, $RELOCATED(1f)
-1:
- .code32
- movw $0x18, %ax
- mov %ax, %ds
- mov %ax, %es
- mov %ax, %fs
- mov %ax, %gs
- mov %ax, %ss
-
- /* restore proper idt */
- lidt idtarg
-
- /* and exit */
- mov __stack, %esp
- popal
- ret
-#endif
-
- .globl __run_interrupt
-__run_interrupt = RELOCATED(.)
-
- pushal
- /* save the stack */
- mov %esp, __stack
+ /* prepare interrupt calling code */
+ movl 36(%ebp), %eax
+ movb %al, __intXX_instr + 1 /* intno */
+
+ /* initial register values */
+ movl 40(%ebp), %eax
+ movl %eax, __registers + 0x00 /* eax */
+ movl 44(%ebp), %eax
+ movl %eax, __registers + 0x04 /* ebx */
+ movl 48(%ebp), %eax
+ movl %eax, __registers + 0x08 /* ecx */
+ movl 52(%ebp), %eax
+ movl %eax, __registers + 0x0c /* edx */
+ movl 56(%ebp), %eax
+ movl %eax, __registers + 0x10 /* esi */
+ movl 60(%ebp), %eax
+ movl %eax, __registers + 0x14 /* esi */
/* This configures CS properly for real mode. */
ljmp $0x28, $RELOCATED(1f)
1:
.code16 /* 16 bit code from here on... */
- // DEBUG
- movb $0xec, %al
- outb %al, $0x80
-
/* Load the segment registers w/ properly configured segment
* descriptors. They will retain these configurations (limits,
* writability, etc.) once protected mode is turned off.
@@ -291,9 +247,9 @@ __run_interrupt = RELOCATED(.)
data32 ljmp $0, $RELOCATED(1f)
1:
- /* put the stack at the end of page zero.
- * that way we can easily share it between real and protected,
- * since the 16-bit ESP at segment 0 will work for any case.
+ /* put the stack at the end of page zero. That way we can easily
+ * share it between real mode and protected mode, because %esp and
+ * %ss:%sp point to the same memory.
*/
/* setup a stack */
mov $0x0, %ax
@@ -312,18 +268,16 @@ __run_interrupt = RELOCATED(.)
mov %ax, %fs
mov %ax, %gs
- /* Call VGA BIOS int10 function 0x4f14 to enable main console
- * Epia-M does not always autosence the main console so forcing
- * it on is good.
- */
+ /* initialize registers for intXX call */
+ movl __registers + 0, %eax
+ movl __registers + 4, %ebx
+ movl __registers + 8, %ecx
+ movl __registers + 12, %edx
+ movl __registers + 16, %esi
+ movl __registers + 20, %edi
- /* Ask VGA option rom to enable main console */
- movw $0x4f14,%ax
- movw $0x8003,%bx
- movw $1, %cx
- movw $0, %dx
- movw $0, %di
- int $0x10
+__intXX_instr = RELOCATED(.)
+ .byte 0xcd, 0x00 /* This becomes intXX */
/* Ok, the job is done, now go back to protected mode coreboot */
movl %cr0, %eax
@@ -345,13 +299,15 @@ __run_interrupt = RELOCATED(.)
lidt idtarg
/* Exit */
- mov __stack, %esp
+ movl __stack, %esp
popal
ret
/* This is the 16-bit interrupt entry point called by the IDT stub code.
+ *
* Before this code code is called, %eax is pushed to the stack, and the
- * interrupt number is loaded into %al
+ * interrupt number is loaded into %al. On return this function cleans up
+ * for its caller.
*/
.code16
__interrupt_handler_16bit = RELOCATED(.)
diff --git a/src/northbridge/via/cx700/cx700_vga.c b/src/northbridge/via/cx700/cx700_vga.c
index 2999907616..2da428c32f 100644
--- a/src/northbridge/via/cx700/cx700_vga.c
+++ b/src/northbridge/via/cx700/cx700_vga.c
@@ -144,6 +144,17 @@ static void write_protect_vgabios(void)
}
#endif
+static void vga_enable_console(void)
+{
+ /* Call VGA BIOS int10 function 0x4f14 to enable main console
+ * Epia-M does not always autosense the main console so forcing
+ * it on is good.
+ */
+
+ /* int#, EAX, EBX, ECX, EDX, ESI, EDI */
+ realmode_interrupt(0x10, 0x4f1f, 0x8003, 0x0001, 0x0000, 0x0000, 0x0000);
+}
+
static void vga_init(device_t dev)
{
u8 reg8;
@@ -166,9 +177,6 @@ static void vga_init(device_t dev)
if (pci_read_config32(dev, PCI_ROM_ADDRESS) != 0xc0000) return;
printk(BIOS_DEBUG, "Enable VGA console\n");
- // this is how it should look:
- // call_bios_interrupt(0x10,0x4f1f,0x8003,1,0);
- // this is how it looks:
vga_enable_console();
/* It's not clear if these need to be programmed before or after
diff --git a/src/northbridge/via/cx700/northbridge.h b/src/northbridge/via/cx700/northbridge.h
index 193ba1fa48..4ae9ce5937 100644
--- a/src/northbridge/via/cx700/northbridge.h
+++ b/src/northbridge/via/cx700/northbridge.h
@@ -21,6 +21,6 @@
#define NORTHBRIDGE_VIA_CX700_H
extern unsigned int cx700_scan_root_bus(device_t root, unsigned int max);
-extern void (*vga_enable_console)(void) __attribute__((regparm(0)));
-
+extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx,
+ u32 esi, u32 edi) __attribute__((regparm(0)));
#endif /* NORTHBRIDGE_VIA_CX700_H */
diff --git a/src/northbridge/via/vt8623/northbridge.h b/src/northbridge/via/vt8623/northbridge.h
index b3a2e75f15..9c0828741c 100644
--- a/src/northbridge/via/vt8623/northbridge.h
+++ b/src/northbridge/via/vt8623/northbridge.h
@@ -2,7 +2,7 @@
#define NORTHBRIDGE_VIA_VT8623_H
unsigned int vt8623_scan_root_bus(device_t root, unsigned int max);
-extern void (*vga_enable_console)(void) __attribute__((regparm(0)));
-void write_protect_vgabios(void);
+extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx,
+ u32 esi, u32 edi) __attribute__((regparm(0)));
#endif /* NORTHBRIDGE_VIA_VT8623_H */
diff --git a/src/northbridge/via/vt8623/vga.c b/src/northbridge/via/vt8623/vga.c
index 78ffe0aa94..eb780cafe7 100644
--- a/src/northbridge/via/vt8623/vga.c
+++ b/src/northbridge/via/vt8623/vga.c
@@ -72,7 +72,8 @@ static int via_vt8623_int15_handler(struct eregs *regs)
return res;
}
-void write_protect_vgabios(void)
+#ifdef UNUSED_CODE
+static void write_protect_vgabios(void)
{
device_t dev;
@@ -86,6 +87,7 @@ void write_protect_vgabios(void)
if (dev)
pci_write_config8(dev, 0x61, 0xaa);
}
+#endif
static void vga_random_fixup(device_t dev)
{
@@ -96,6 +98,17 @@ static void vga_random_fixup(device_t dev)
pci_write_config32(dev,0x14,0xdc000000);
}
+static void vga_enable_console(void)
+{
+ /* Call VGA BIOS int10 function 0x4f14 to enable main console
+ * Epia-M does not always autosense the main console so forcing
+ * it on is good.
+ */
+
+ /* int#, EAX, EBX, ECX, EDX, ESI, EDI */
+ realmode_interrupt(0x10, 0x4f1f, 0x8003, 0x0001, 0x0000, 0x0000, 0x0000);
+}
+
static void vga_init(device_t dev)
{
vga_random_fixup(dev);
@@ -118,9 +131,6 @@ static void vga_init(device_t dev)
pci_dev_init(dev);
printk(BIOS_DEBUG, "Enable VGA console\n");
- // this is how it should look:
- // call_bios_interrupt(0x10,0x4f1f,0x8003,1,0);
- // this is how it looks:
vga_enable_console();
#ifdef MEASURE_VGA_INIT_TIME
diff --git a/src/northbridge/via/vx800/northbridge.h b/src/northbridge/via/vx800/northbridge.h
index ed6bd13e2c..05f75d2649 100644
--- a/src/northbridge/via/vx800/northbridge.h
+++ b/src/northbridge/via/vx800/northbridge.h
@@ -21,6 +21,7 @@
#define NORTHBRIDGE_VIA_VX800_H
extern unsigned int vx800_scan_root_bus(device_t root, unsigned int max);
-extern void (*vga_enable_console)(void) __attribute__((regparm(0)));
+extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx,
+ u32 esi, u32 edi) __attribute__((regparm(0)));
#endif /* NORTHBRIDGE_VIA_VX800_H */
diff --git a/src/northbridge/via/vx800/vga.c b/src/northbridge/via/vx800/vga.c
index cd33770823..b57ba50e84 100644
--- a/src/northbridge/via/vx800/vga.c
+++ b/src/northbridge/via/vx800/vga.c
@@ -127,7 +127,7 @@ static int via_vx800_int15_handler(struct eregs *regs)
}
#ifdef UNUSED_CODE
-void write_protect_vgabios(void)
+static void write_protect_vgabios(void)
{
device_t dev;
@@ -144,6 +144,17 @@ void write_protect_vgabios(void)
}
#endif
+static void vga_enable_console(void)
+{
+ /* Call VGA BIOS int10 function 0x4f14 to enable main console
+ * Epia-M does not always autosense the main console so forcing
+ * it on is good.
+ */
+
+ /* int#, EAX, EBX, ECX, EDX, ESI, EDI */
+ realmode_interrupt(0x10, 0x4f1f, 0x8003, 0x0001, 0x0000, 0x0000, 0x0000);
+}
+
extern u8 acpi_sleep_type;
static void vga_init(device_t dev)
{
@@ -170,9 +181,6 @@ static void vga_init(device_t dev)
pci_dev_init(dev);
printk(BIOS_DEBUG, "Enable VGA console\n");
- // this is how it should look:
- // call_bios_interrupt(0x10,0x4f1f,0x8003,1,0);
- // this is how it looks:
vga_enable_console();
if ((acpi_sleep_type == 3)/* || (PAYLOAD_IS_SEABIOS == 0)*/) {