summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/asus/f2a85-m/Kconfig1
-rw-r--r--src/mainboard/asus/f2a85-m/romstage.c139
2 files changed, 40 insertions, 100 deletions
diff --git a/src/mainboard/asus/f2a85-m/Kconfig b/src/mainboard/asus/f2a85-m/Kconfig
index 4ca32c30c7..f3b2d7d3aa 100644
--- a/src/mainboard/asus/f2a85-m/Kconfig
+++ b/src/mainboard/asus/f2a85-m/Kconfig
@@ -18,7 +18,6 @@ if BOARD_ASUS_F2A85_M || BOARD_ASUS_F2A85_M_PRO || BOARD_ASUS_F2A85_M_LE
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
- select AGESA_LEGACY
select CPU_AMD_AGESA_FAMILY15_TN
select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN
select SOUTHBRIDGE_AMD_AGESA_HUDSON
diff --git a/src/mainboard/asus/f2a85-m/romstage.c b/src/mainboard/asus/f2a85-m/romstage.c
index 77024a01c3..3165dc5306 100644
--- a/src/mainboard/asus/f2a85-m/romstage.c
+++ b/src/mainboard/asus/f2a85-m/romstage.c
@@ -14,22 +14,10 @@
* GNU General Public License for more details.
*/
-#include <northbridge/amd/agesa/agesawrapper.h>
-#include <northbridge/amd/agesa/agesa_helper.h>
-
-#include <arch/acpi.h>
-#include <arch/cpu.h>
#include <arch/io.h>
-#include <arch/stages.h>
-#include <cbmem.h>
#include <console/console.h>
-#include <cpu/amd/agesa/s3_resume.h>
-#include <cpu/amd/car.h>
-#include <cpu/x86/bist.h>
-#include <cpu/x86/lapic.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <device/pnp_def.h>
+
+#include <northbridge/amd/agesa/state_machine.h>
#include <southbridge/amd/common/amd_defs.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
#include <southbridge/amd/agesa/hudson/smbus.h>
@@ -76,98 +64,51 @@ static void superio_init_m_pro(void)
nuvoton_enable_serial(uart, CONFIG_TTYS0_BASE);
}
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void board_BeforeAgesa(struct sysinfo *cb)
{
- u32 val;
u8 byte;
pci_devfn_t dev;
- /* Must come first to enable PCI MMCONF. */
- amd_initmmio();
-
if (IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE))
hudson_pci_port80();
else if (IS_ENABLED(CONFIG_POST_DEVICE_LPC))
hudson_lpc_port80();
- if (!cpu_init_detectedx && boot_cpu()) {
-
- /* enable SIO LPC decode */
- dev = PCI_DEV(0, 0x14, 3);
- byte = pci_read_config8(dev, 0x48);
- byte |= 3; /* 2e, 2f */
- pci_write_config8(dev, 0x48, byte);
-
- /* enable serial decode */
- byte = pci_read_config8(dev, 0x44);
- byte |= (1 << 6); /* 0x3f8 */
- pci_write_config8(dev, 0x44, byte);
-
- post_code(0x30);
-
- /* enable SB MMIO space */
- outb(0x24, 0xcd6);
- outb(0x1, 0xcd7);
-
- /* enable SIO clock */
- sbxxx_enable_48mhzout();
-
- if (IS_ENABLED(CONFIG_BOARD_ASUS_F2A85_M_PRO))
- superio_init_m_pro();
- else
- superio_init_m();
-
- console_init();
-
- /* turn on secondary smbus at b20 */
- outb(0x28, 0xcd6);
- byte = inb(0xcd7);
- byte |= 1;
- outb(byte, 0xcd7);
-
- /* set DDR3 voltage */
- byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL;
-
- /* default is byte = 0x0, so no need to set it in this case */
- if (byte)
- do_smbus_write_byte(0xb20, 0x15, 0x3, byte);
- }
-
- /* Halt if there was a built in self test failure */
- post_code(0x34);
- report_bist_failure(bist);
-
- /* Load MPB */
- val = cpuid_eax(1);
- printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
- printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
-
- post_code(0x37);
- agesawrapper_amdinitreset();
- post_code(0x39);
-
- agesawrapper_amdinitearly();
- int s3resume = acpi_is_wakeup_s3();
- if (!s3resume) {
- post_code(0x40);
- agesawrapper_amdinitpost();
- post_code(0x41);
- agesawrapper_amdinitenv();
- disable_cache_as_ram();
- } else { /* S3 detect */
- printk(BIOS_INFO, "S3 detected\n");
-
- post_code(0x60);
- agesawrapper_amdinitresume();
- amd_initcpuio();
- agesawrapper_amds3laterestore();
-
- post_code(0x61);
- prepare_for_resume();
- }
-
- post_code(0x50);
- copy_and_run();
-
- post_code(0x54); /* Should never see this post code. */
+ /* enable SIO LPC decode */
+ dev = PCI_DEV(0, 0x14, 3);
+ byte = pci_read_config8(dev, 0x48);
+ byte |= 3; /* 2e, 2f */
+ pci_write_config8(dev, 0x48, byte);
+
+ /* enable serial decode */
+ byte = pci_read_config8(dev, 0x44);
+ byte |= (1 << 6); /* 0x3f8 */
+ pci_write_config8(dev, 0x44, byte);
+
+ post_code(0x30);
+
+ /* enable SB MMIO space */
+ outb(0x24, 0xcd6);
+ outb(0x1, 0xcd7);
+
+ /* enable SIO clock */
+ sbxxx_enable_48mhzout();
+
+ if (IS_ENABLED(CONFIG_BOARD_ASUS_F2A85_M_PRO))
+ superio_init_m_pro();
+ else
+ superio_init_m();
+
+ /* turn on secondary smbus at b20 */
+ outb(0x28, 0xcd6);
+ byte = inb(0xcd7);
+ byte |= 1;
+ outb(byte, 0xcd7);
+
+ /* set DDR3 voltage */
+ byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL;
+
+ /* default is byte = 0x0, so no need to set it in this case */
+ if (byte)
+ do_smbus_write_byte(0xb20, 0x15, 0x3, byte);
}