diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/southbridge/amd/sb600/early_setup.c | 10 | ||||
-rw-r--r-- | src/southbridge/amd/sb600/lpc.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb600/smbus.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb700/early_setup.c | 8 | ||||
-rw-r--r-- | src/southbridge/amd/sb700/fadt.c | 4 | ||||
-rw-r--r-- | src/southbridge/amd/sb700/hda.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb700/lpc.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb700/sata.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb700/sm.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb700/smbus.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/early_setup.c | 6 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/fadt.c | 4 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/hda.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/lpc.c | 4 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/sata.c | 4 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/sm.c | 2 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/smbus.c | 4 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/usb.c | 2 |
18 files changed, 32 insertions, 32 deletions
diff --git a/src/southbridge/amd/sb600/early_setup.c b/src/southbridge/amd/sb600/early_setup.c index b6611f6d65..c49420b2b2 100644 --- a/src/southbridge/amd/sb600/early_setup.c +++ b/src/southbridge/amd/sb600/early_setup.c @@ -277,7 +277,7 @@ static void sb600_devices_por_init(void) /* sbPorAtStartOfTblCfg */ /* Set A-Link bridge access address. This address is set at device 14h, function 0, register 0xf0. - * This is an I/O address. The I/O address must be on 16-byte boundry. */ + * This is an I/O address. The I/O address must be on 16-byte boundary. */ pci_write_config32(dev, 0xf0, AB_INDX); /* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */ @@ -301,7 +301,7 @@ static void sb600_devices_por_init(void) /* set smbus 1, ASF 2.0 (Alert Standard Format), iobase */ pci_write_config16(dev, 0x58, SMBUS_IO_BASE | 0x11); - /* TODO: I don't know the useage of followed two lines. I copied them from CIM. */ + /* TODO: I don't know the usage of followed two lines. I copied them from CIM. */ pci_write_config8(dev, 0x0a, 0x1); pci_write_config8(dev, 0x0b, 0x6); @@ -379,7 +379,7 @@ static void sb600_devices_por_init(void) /* Arbiter enable. */ pci_write_config8(dev, 0x43, 0xff); - /* Set PCDMA request into hight priority list. */ + /* Set PCDMA request into height priority list. */ /* pci_write_config8(dev, 0x49, 0x1) */ ; pci_write_config8(dev, 0x40, 0x26); @@ -483,7 +483,7 @@ static void sb600_pmio_por_init(void) byte |= 1 << 1; pmio_write(0x55, byte); - /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */ + /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */ byte = pmio_read(0x52); byte |= 1 << 6; pmio_write(0x52, byte); @@ -525,7 +525,7 @@ static void sb600_pci_cfg(void) /* SMBus Device, BDF:0-20-0 */ dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); - /* Eable the hidden revision ID, available after A13. */ + /* Enable the hidden revision ID, available after A13. */ byte = pci_read_config8(dev, 0x70); byte |= (1 << 8); pci_write_config8(dev, 0x70, byte); diff --git a/src/southbridge/amd/sb600/lpc.c b/src/southbridge/amd/sb600/lpc.c index d8e63b557c..acee69dbae 100644 --- a/src/southbridge/amd/sb600/lpc.c +++ b/src/southbridge/amd/sb600/lpc.c @@ -99,7 +99,7 @@ static void sb600_lpc_read_resources(device_t dev) /** * @brief Enable resources for children devices * - * @param dev the device whos children's resources are to be enabled + * @param dev the device whose children's resources are to be enabled * */ static void sb600_lpc_enable_childrens_resources(device_t dev) diff --git a/src/southbridge/amd/sb600/smbus.c b/src/southbridge/amd/sb600/smbus.c index 50a2164ae5..86cebccb88 100644 --- a/src/southbridge/amd/sb600/smbus.c +++ b/src/southbridge/amd/sb600/smbus.c @@ -185,7 +185,7 @@ static void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val) tmp |= val; /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */ - outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we don't have to do it again. */ outl(tmp, AB_DATA); } diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c index ae329129de..82d51e6053 100644 --- a/src/southbridge/amd/sb700/early_setup.c +++ b/src/southbridge/amd/sb700/early_setup.c @@ -252,7 +252,7 @@ void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn) byte |= 0x20; pmio_write(0x8f, byte); - pmio_write(0x8b, 0x01); /* TODO: if the HT Link is 200 MHz, it is 0x0A. It doesnt often happen. */ + pmio_write(0x8b, 0x01); /* TODO: if the HT Link is 200 MHz, it is 0x0A. It doesn't often happen. */ pmio_write(0x8a, 0x90); pmio_write(0x88, 0x10); @@ -374,7 +374,7 @@ static void sb700_devices_por_init(void) /* sbPorAtStartOfTblCfg */ /* Set A-Link bridge access address. This address is set at device 14h, function 0, register 0xf0. - * This is an I/O address. The I/O address must be on 16-byte boundry. */ + * This is an I/O address. The I/O address must be on 16-byte boundary. */ pci_write_config32(dev, 0xf0, AB_INDX); /* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */ @@ -476,7 +476,7 @@ static void sb700_devices_por_init(void) pci_write_config8(dev, 0x49, 0xFF); /* Enable 0x480-0x4bf, 0x4700-0x470B */ byte = pci_read_config8(dev, 0x4A); - byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */ + byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuration for port 0x80. */ pci_write_config8(dev, 0x4A, byte); /* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */ @@ -490,7 +490,7 @@ static void sb700_devices_por_init(void) /* Arbiter enable. */ pci_write_config8(dev, 0x43, 0xff); - /* Set PCDMA request into hight priority list. */ + /* Set PCDMA request into height priority list. */ /* pci_write_config8(dev, 0x49, 0x1) */ ; pci_write_config8(dev, 0x40, 0x26); diff --git a/src/southbridge/amd/sb700/fadt.c b/src/southbridge/amd/sb700/fadt.c index 2a61fae1ab..13e9d3baf5 100644 --- a/src/southbridge/amd/sb700/fadt.c +++ b/src/southbridge/amd/sb700/fadt.c @@ -62,7 +62,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + fadt->gpe1_blk = 0x0000; /* we don't have gpe1 block, do we? */ fadt->pm1_evt_len = 4; fadt->pm1_cnt_len = 2; @@ -81,7 +81,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->duty_width = 3; fadt->day_alrm = 0; /* 0x7d these have to be */ fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->century = 0; /* 0x7f to make rtc alarm work */ fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ fadt->flags = 0x0001c1a5;/* 0x25; */ diff --git a/src/southbridge/amd/sb700/hda.c b/src/southbridge/amd/sb700/hda.c index 61cc5859d8..308b08cc32 100644 --- a/src/southbridge/amd/sb700/hda.c +++ b/src/southbridge/amd/sb700/hda.c @@ -53,7 +53,7 @@ static int set_bits(u32 port, u32 mask, u32 val) dword &= mask; } while ((dword != val) && --count); - /* Timeout occured */ + /* Timeout occurred */ if (!count) return -1; return 0; diff --git a/src/southbridge/amd/sb700/lpc.c b/src/southbridge/amd/sb700/lpc.c index 173de8369f..26478b7e0a 100644 --- a/src/southbridge/amd/sb700/lpc.c +++ b/src/southbridge/amd/sb700/lpc.c @@ -140,7 +140,7 @@ static void sb700_lpc_set_resources(struct device *dev) pci_dev_set_resources(dev); - /* Specical case. SPI Base Address. The SpiRomEnable should be set. */ + /* Special case. SPI Base Address. The SpiRomEnable should be set. */ res = find_resource(dev, 0xA0); pci_write_config32(dev, 0xA0, res->base | 1 << 1); } diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c index c0e3c0f6aa..7fa924b8a3 100644 --- a/src/southbridge/amd/sb700/sata.c +++ b/src/southbridge/amd/sb700/sata.c @@ -38,7 +38,7 @@ static int sata_drive_detect(int portnum, u16 iobar) if (byte != (0xA0 + 0x10 * (portnum % 2))) { /* This will happen at the first iteration of this loop * if the first SATA port is unpopulated and the - * second SATA port is poulated. + * second SATA port is populated. */ printk(BIOS_DEBUG, "drive no longer selected after %i ms, " "retrying init\n", i * 10); diff --git a/src/southbridge/amd/sb700/sm.c b/src/southbridge/amd/sb700/sm.c index 8bb5378ff7..5aa4eb102d 100644 --- a/src/southbridge/amd/sb700/sm.c +++ b/src/southbridge/amd/sb700/sm.c @@ -181,7 +181,7 @@ static void sm_init(device_t dev) if ((REV_SB700_A11 == rev) || REV_SB700_A12 == rev) { byte |= 1 << 0; } - /*Set bit2 to 1, enable Io port 60h read/wrire SMi trapping and + /*Set bit2 to 1, enable Io port 60h read/write SMi trapping and *Io port 64h write Smi trapping. conflict with ps2 keyboard */ //byte |= 1 << 2 | 1 << 3 | 1 << 4; diff --git a/src/southbridge/amd/sb700/smbus.c b/src/southbridge/amd/sb700/smbus.c index 46dad41c0a..9e3844df0d 100644 --- a/src/southbridge/amd/sb700/smbus.c +++ b/src/southbridge/amd/sb700/smbus.c @@ -38,7 +38,7 @@ void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val) tmp |= val; /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */ - outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we don't have to do it again. */ outl(tmp, AB_DATA); reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL; } diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c index 5244490fc3..2b488d937d 100644 --- a/src/southbridge/amd/sb800/early_setup.c +++ b/src/southbridge/amd/sb800/early_setup.c @@ -382,7 +382,7 @@ static void sb800_devices_por_init(void) /* sbPorAtStartOfTblCfg */ /* rpr 4.1.Set A-Link bridge access address. - * This is an I/O address. The I/O address must be on 16-byte boundry. */ + * This is an I/O address. The I/O address must be on 16-byte boundary. */ //pci_write_config32(dev, 0xf0, AB_INDX); pmio_write(0xE0, AB_INDX & 0xFF); pmio_write(0xE1, (AB_INDX >> 8) & 0xFF); @@ -471,7 +471,7 @@ static void sb800_devices_por_init(void) /* Arbiter enable. */ pci_write_config8(dev, 0x43, 0xff); - /* Set PCDMA request into hight priority list. */ + /* Set PCDMA request into height priority list. */ /* pci_write_config8(dev, 0x49, 0x1) */ ; pci_write_config8(dev, 0x40, 0x26); @@ -572,7 +572,7 @@ static void sb800_pci_cfg(void) /* LPC Device, BDF:0-20-3 */ /* The code below is ported from old chipset. It is not - * metioned in RPR. But I keep them. The registers and the + * Mentioned in RPR. But I keep them. The registers and the * comments are compatible. */ dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); /* Enabling LPC DMA function. */ diff --git a/src/southbridge/amd/sb800/fadt.c b/src/southbridge/amd/sb800/fadt.c index b37d01d1ad..9e120d5a01 100644 --- a/src/southbridge/amd/sb800/fadt.c +++ b/src/southbridge/amd/sb800/fadt.c @@ -62,7 +62,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + fadt->gpe1_blk = 0x0000; /* we don't have gpe1 block, do we? */ fadt->pm1_evt_len = 4; fadt->pm1_cnt_len = 2; @@ -81,7 +81,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->duty_width = 3; fadt->day_alrm = 0; /* 0x7d these have to be */ fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->century = 0; /* 0x7f to make rtc alarm work */ fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ fadt->flags = 0x0001c1a5;/* 0x25; */ diff --git a/src/southbridge/amd/sb800/hda.c b/src/southbridge/amd/sb800/hda.c index ad8f80f0d8..5265684f29 100644 --- a/src/southbridge/amd/sb800/hda.c +++ b/src/southbridge/amd/sb800/hda.c @@ -53,7 +53,7 @@ static int set_bits(u32 port, u32 mask, u32 val) dword &= mask; } while ((dword != val) && --count); - /* Timeout occured */ + /* Timeout occurred */ if (!count) return -1; return 0; diff --git a/src/southbridge/amd/sb800/lpc.c b/src/southbridge/amd/sb800/lpc.c index 314a963e2a..f862a97ea4 100644 --- a/src/southbridge/amd/sb800/lpc.c +++ b/src/southbridge/amd/sb800/lpc.c @@ -113,7 +113,7 @@ static void sb800_lpc_set_resources(struct device *dev) pci_dev_set_resources(dev); - /* Specical case. SPI Base Address. The SpiRomEnable should be set. */ + /* Special case. SPI Base Address. The SpiRomEnable should be set. */ res = find_resource(dev, 0xA0); pci_write_config32(dev, 0xA0, res->base | 1 << 1); @@ -122,7 +122,7 @@ static void sb800_lpc_set_resources(struct device *dev) /** * @brief Enable resources for children devices * - * @param dev the device whos children's resources are to be enabled + * @param dev the device whose children's resources are to be enabled * */ static void sb800_lpc_enable_childrens_resources(device_t dev) diff --git a/src/southbridge/amd/sb800/sata.c b/src/southbridge/amd/sb800/sata.c index bd35e50fe7..a1aa6e051e 100644 --- a/src/southbridge/amd/sb800/sata.c +++ b/src/southbridge/amd/sb800/sata.c @@ -38,7 +38,7 @@ static int sata_drive_detect(int portnum, u16 iobar) if (byte != (0xA0 + 0x10 * (portnum % 2))) { /* This will happen at the first iteration of this loop * if the first SATA port is unpopulated and the - * second SATA port is poulated. + * second SATA port is populated. */ printk(BIOS_DEBUG, "drive no longer selected after %i ms, " "retrying init\n", i * 10); @@ -97,7 +97,7 @@ static void sata_init(struct device *dev) /* get rev_id */ rev_id = pci_read_config8(sm_dev, 0x08) - 0x2F; - /* get base addresss */ + /* get base address */ sata_bar5 = pci_read_config32(dev, 0x24) & ~0x3FF; sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7; sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3; diff --git a/src/southbridge/amd/sb800/sm.c b/src/southbridge/amd/sb800/sm.c index acdfb090a6..662a82e4ef 100644 --- a/src/southbridge/amd/sb800/sm.c +++ b/src/southbridge/amd/sb800/sm.c @@ -313,7 +313,7 @@ static void sb800_sm_set_resources(struct device *dev) pci_dev_set_resources(dev); - /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridage */ + /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */ byte = pm_ioread(0x52); byte |= 1 << 6; pm_iowrite(0x52, byte); diff --git a/src/southbridge/amd/sb800/smbus.c b/src/southbridge/amd/sb800/smbus.c index 5c4152a438..852e73b7aa 100644 --- a/src/southbridge/amd/sb800/smbus.c +++ b/src/southbridge/amd/sb800/smbus.c @@ -196,7 +196,7 @@ void alink_ab_indx(u32 reg_space, u32 reg_addr, tmp |= val; /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */ - outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we don't have to do it again. */ outl(tmp, AB_DATA); outl(0, AB_INDX); } @@ -218,7 +218,7 @@ void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, tmp |= val; //printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr); - outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ + outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we don't have to do it again. */ outl(tmp, AB_DATA); outl(0, AB_INDX); } diff --git a/src/southbridge/amd/sb800/usb.c b/src/southbridge/amd/sb800/usb.c index 9304344c6e..55be7b88f9 100644 --- a/src/southbridge/amd/sb800/usb.c +++ b/src/southbridge/amd/sb800/usb.c @@ -71,7 +71,7 @@ static void usb_init2(struct device *dev) usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF; printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0); - /* RPR7.3 Enables the USB PHY auto calibration resister to match 45ohm resistence */ + /* RPR7.3 Enables the USB PHY auto calibration resister to match 45ohm resistance */ dword = 0x00020F00; write32(usb2_bar0 + 0xC0, dword); |