diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/qualcomm/sc7180/Kconfig | 9 | ||||
| -rw-r--r-- | src/soc/qualcomm/sc7180/Makefile.inc | 4 | ||||
| -rw-r--r-- | src/soc/qualcomm/sc7180/bootblock.c | 2 | ||||
| -rw-r--r-- | src/soc/qualcomm/sc7180/include/soc/qspi.h | 121 | ||||
| -rw-r--r-- | src/soc/qualcomm/sc7180/qspi.c | 306 | ||||
| -rw-r--r-- | src/soc/qualcomm/sc7180/spi.c | 13 |
6 files changed, 452 insertions, 3 deletions
diff --git a/src/soc/qualcomm/sc7180/Kconfig b/src/soc/qualcomm/sc7180/Kconfig index 70737e9379..4093c93213 100644 --- a/src/soc/qualcomm/sc7180/Kconfig +++ b/src/soc/qualcomm/sc7180/Kconfig @@ -22,4 +22,13 @@ config VBOOT select VBOOT_MUST_REQUEST_DISPLAY select VBOOT_STARTS_IN_BOOTBLOCK +config SC7180_QSPI + bool + default y if COMMON_CBFS_SPI_WRAPPER + prompt "Build Flash Using SPI-NOR" + +config BOOT_DEVICE_SPI_FLASH_BUS + int + default 16 + endif diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc index 6b492d5784..e1d0492085 100644 --- a/src/soc/qualcomm/sc7180/Makefile.inc +++ b/src/soc/qualcomm/sc7180/Makefile.inc @@ -9,6 +9,7 @@ bootblock-y += spi.c bootblock-y += gpio.c bootblock-$(CONFIG_DRIVERS_UART) += uart_bitbang.c bootblock-y += clock.c +bootblock-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ verstage-y += timer.c @@ -16,6 +17,7 @@ verstage-y += spi.c verstage-y += gpio.c verstage-$(CONFIG_DRIVERS_UART) += uart_bitbang.c verstage-y += clock.c +verstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ romstage-y += cbmem.c @@ -28,6 +30,7 @@ romstage-y += spi.c romstage-y += gpio.c romstage-$(CONFIG_DRIVERS_UART) += uart_bitbang.c romstage-y += clock.c +romstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ ramstage-y += soc.c @@ -36,6 +39,7 @@ ramstage-y += spi.c ramstage-y += gpio.c ramstage-$(CONFIG_DRIVERS_UART) += uart_bitbang.c ramstage-y += clock.c +ramstage-$(CONFIG_SC7180_QSPI) += qspi.c ################################################################################ diff --git a/src/soc/qualcomm/sc7180/bootblock.c b/src/soc/qualcomm/sc7180/bootblock.c index bf80bff706..4f97d76c9b 100644 --- a/src/soc/qualcomm/sc7180/bootblock.c +++ b/src/soc/qualcomm/sc7180/bootblock.c @@ -16,9 +16,11 @@ #include <bootblock_common.h> #include <soc/clock.h> #include <soc/mmu.h> +#include <soc/qspi.h> void bootblock_soc_init(void) { sc7180_mmu_init(); clock_init(); + quadspi_init(25 * MHz); } diff --git a/src/soc/qualcomm/sc7180/include/soc/qspi.h b/src/soc/qualcomm/sc7180/include/soc/qspi.h new file mode 100644 index 0000000000..c3d1f78196 --- /dev/null +++ b/src/soc/qualcomm/sc7180/include/soc/qspi.h @@ -0,0 +1,121 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2019 Qualcomm Technologies. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <types.h> +#include <soc/addressmap.h> +#include <spi-generic.h> + +#ifndef __SOC_QUALCOMM_SC7180_QSPI_H__ +#define __SOC_QUALCOMM_SC7180_QSPI_H__ + +struct sc7180_qspi_regs { + u32 mstr_cfg; + u32 ahb_mstr_cfg; + u32 reserve_0; + u32 mstr_int_en; + u32 mstr_int_sts; + u32 pio_xfer_ctrl; + u32 pio_xfer_cfg; + u32 pio_xfer_sts; + u32 pio_dataout_1byte; + u32 pio_dataout_4byte; + u32 rd_fifo_cfg; + u32 rd_fifo_sts; + u32 rd_fifo_rst; + u32 reserve_1[3]; + u32 next_dma_desc_addr; + u32 current_dma_desc_addr; + u32 current_mem_addr; + u32 hw_version; + u32 rd_fifo[16]; +}; + +check_member(sc7180_qspi_regs, rd_fifo, 0x50); +static struct sc7180_qspi_regs * const sc7180_qspi = (void *) QSPI_BASE; + +// MSTR_CONFIG register + +#define TX_DATA_OE_DELAY_SHIFT 24 +#define TX_DATA_OE_DELAY_MASK (0x3 << TX_DATA_OE_DELAY_SHIFT) +#define TX_CS_N_DELAY_SHIFT 22 +#define TX_CS_N_DELAY_MASK (0x3 << TX_CS_N_DELAY_SHIFT) +#define TX_CLK_DELAY_SHIFT 20 +#define TX_CLK_DELAY_MASK (0x3 << TX_CLK_DELAY_SHIFT) +#define TX_DATA_DELAY_SHIFT 18 +#define TX_DATA_DELAY_MASK (0x3 << TX_DATA_DELAY_SHIFT) +#define LPA_BASE_SHIFT 14 +#define LPA_BASE_MASK (0xF << LPA_BASE_SHIFT) +#define SBL_EN BIT(13) +#define CHIP_SELECT_NUM BIT(12) +#define SPI_MODE_SHIFT 10 +#define SPI_MODE_MASK (0x3 << SPI_MODE_SHIFT) +#define BIG_ENDIAN_MODE BIT(9) +#define DMA_ENABLE BIT(8) +#define PIN_WPN BIT(7) +#define PIN_HOLDN BIT(6) +#define FB_CLK_EN BIT(4) +#define FULL_CYCLE_MODE BIT(3) + +// MSTR_INT_ENABLE and MSTR_INT_STATUS register + +#define DMA_CHAIN_DONE BIT(31) +#define TRANSACTION_DONE BIT(16) +#define WRITE_FIFO_OVERRUN BIT(11) +#define WRITE_FIFO_FULL BIT(10) +#define HRESP_FROM_NOC_ERR BIT(3) +#define RESP_FIFO_RDY BIT(2) +#define RESP_FIFO_NOT_EMPTY BIT(1) +#define RESP_FIFO_UNDERRUN BIT(0) + +// PIO_TRANSFER_CONFIG register + +#define TRANSFER_FRAGMENT BIT(8) +#define MULTI_IO_MODE_SHIFT 1 +#define MULTI_IO_MODE_MASK (0x7 << MULTI_IO_MODE_SHIFT) +#define TRANSFER_DIRECTION BIT(0) + +// PIO_TRANSFER_STATUS register + +#define WR_FIFO_BYTES_SHIFT 16 +#define WR_FIFO_BYTES_MASK (0xFFFF << WR_FIFO_BYTES_SHIFT) + +// RD_FIFO_CONFIG register + +#define CONTINUOUS_MODE BIT(0) + +// RD_FIFO_STATUS register + +#define FIFO_EMPTY BIT(11) +#define WR_CNTS_SHIFT 4 +#define WR_CNTS_MASK (0x7F << WR_CNTS_SHIFT) +#define RDY_64BYTE BIT(3) +#define RDY_32BYTE BIT(2) +#define RDY_16BYTE BIT(1) +#define FIFO_RDY BIT(0) + +// RD_FIFO_RESET register + +#define RESET_FIFO BIT(0) + +#define QSPI_MAX_PACKET_COUNT 0xFFC0 + +void quadspi_init(uint32_t hz); +int sc7180_claim_bus(const struct spi_slave *slave); +int sc7180_setup_bus(const struct spi_slave *slave); +void sc7180_release_bus(const struct spi_slave *slave); +int sc7180_xfer(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes); +int sc7180_xfer_dual(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes); +#endif /* __SOC_QUALCOMM_SC7180_QSPI_H__ */ diff --git a/src/soc/qualcomm/sc7180/qspi.c b/src/soc/qualcomm/sc7180/qspi.c new file mode 100644 index 0000000000..30dc1c3387 --- /dev/null +++ b/src/soc/qualcomm/sc7180/qspi.c @@ -0,0 +1,306 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <spi-generic.h> +#include <spi_flash.h> +#include <arch/cache.h> +#include <device/mmio.h> +#include <soc/addressmap.h> +#include <soc/qspi.h> +#include <soc/gpio.h> +#include <soc/clock.h> +#include <symbols.h> +#include <assert.h> +#include <gpio.h> +#include <string.h> + +#define CACHE_LINE_SIZE 64 + +static int curr_desc_idx = -1; + +struct cmd_desc { + uint32_t data_address; + uint32_t next_descriptor; + uint32_t direction:1; + uint32_t multi_io_mode:3; + uint32_t reserved1:4; + uint32_t fragment:1; + uint32_t reserved2:7; + uint32_t length:16; + //------------------------// + uint32_t bounce_src; + uint32_t bounce_dst; + uint32_t bounce_length; + uint64_t padding[5]; +}; + +enum qspi_mode { + SDR_1BIT = 1, + SDR_2BIT = 2, + SDR_4BIT = 3, + DDR_1BIT = 5, + DDR_2BIT = 6, + DDR_4BIT = 7, +}; + +enum cs_state { + CS_DEASSERT, + CS_ASSERT +}; + +struct xfer_cfg { + enum qspi_mode mode; +}; + +enum bus_xfer_direction { + MASTER_READ = 0, + MASTER_WRITE = 1, +}; + +struct { + struct cmd_desc descriptors[3]; + uint8_t buffers[3][CACHE_LINE_SIZE]; +} *dma = (void *)_dma_coherent; + +static void dma_transfer_chain(struct cmd_desc *chain) +{ + uint32_t mstr_int_status; + + write32(&sc7180_qspi->mstr_int_sts, 0xFFFFFFFF); + write32(&sc7180_qspi->next_dma_desc_addr, (uint32_t)(uintptr_t) chain); + + while (1) { + mstr_int_status = read32(&sc7180_qspi->mstr_int_sts); + if (mstr_int_status & DMA_CHAIN_DONE) + break; + } +} + +static void flush_chain(void) +{ + struct cmd_desc *desc = &dma->descriptors[0]; + uint8_t *src; + uint8_t *dst; + + dma_transfer_chain(desc); + + while (desc) { + if (desc->direction == MASTER_READ) { + if (desc->bounce_length == 0) + dcache_invalidate_by_mva( + (void *)(uintptr_t) desc->data_address, + desc->length); + else { + src = (void *)(uintptr_t) desc->bounce_src; + dst = (void *)(uintptr_t) desc->bounce_dst; + memcpy(dst, src, desc->bounce_length); + } + } + desc = (void *)(uintptr_t) desc->next_descriptor; + } + curr_desc_idx = -1; +} + +static struct cmd_desc *allocate_descriptor(void) +{ + struct cmd_desc *current; + struct cmd_desc *next; + uint8_t index; + + current = (curr_desc_idx == -1) ? + NULL : &dma->descriptors[curr_desc_idx]; + + index = ++curr_desc_idx; + next = &dma->descriptors[index]; + + next->data_address = (uint32_t) (uintptr_t) dma->buffers[index]; + + next->next_descriptor = 0; + next->direction = MASTER_READ; + next->multi_io_mode = 0; + next->reserved1 = 0; + next->fragment = 0; + next->reserved2 = 0; + next->length = 0; + next->bounce_src = 0; + next->bounce_dst = 0; + next->bounce_length = 0; + + if (current) { + current->next_descriptor = (uint32_t)(uintptr_t) next; + current->fragment = 1; + } + + return next; +} + +static void cs_change(enum cs_state state) +{ + gpio_set(GPIO(68), state == CS_DEASSERT); +} + +static void configure_gpios(void) +{ + gpio_output(GPIO(68), 1); + + gpio_configure(GPIO(64), GPIO64_FUNC_QSPI_DATA_0, + GPIO_NO_PULL, GPIO_2MA, GPIO_OUTPUT_ENABLE); + + gpio_configure(GPIO(65), GPIO65_FUNC_QSPI_DATA_1, + GPIO_NO_PULL, GPIO_2MA, GPIO_OUTPUT_ENABLE); + + gpio_configure(GPIO(63), GPIO63_FUNC_QSPI_CLK, + GPIO_NO_PULL, GPIO_2MA, GPIO_OUTPUT_ENABLE); +} + +static void queue_bounce_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + struct cmd_desc *desc; + uint8_t *ptr; + + desc = allocate_descriptor(); + desc->direction = write; + desc->multi_io_mode = data_mode; + ptr = (void *)(uintptr_t) desc->data_address; + + if (write) { + memcpy(ptr, data, data_bytes); + } else { + desc->bounce_src = (uint32_t)(uintptr_t) ptr; + desc->bounce_dst = (uint32_t)(uintptr_t) data; + desc->bounce_length = data_bytes; + } + + desc->length = data_bytes; +} + +static void queue_direct_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + struct cmd_desc *desc; + + desc = allocate_descriptor(); + desc->direction = write; + desc->multi_io_mode = data_mode; + desc->data_address = (uint32_t)(uintptr_t) data; + desc->length = data_bytes; + + if (write) + dcache_clean_by_mva(data, data_bytes); + else + dcache_invalidate_by_mva(data, data_bytes); +} + +static void queue_data(uint8_t *data, uint32_t data_bytes, + enum qspi_mode data_mode, bool write) +{ + uint8_t *aligned_ptr; + uint8_t *epilog_ptr; + uint32_t prolog_bytes, aligned_bytes, epilog_bytes; + + if (data_bytes == 0) + return; + + aligned_ptr = + (uint8_t *)ALIGN_UP((uintptr_t)data, CACHE_LINE_SIZE); + + prolog_bytes = MIN(data_bytes, aligned_ptr - data); + aligned_bytes = ALIGN_DOWN(data_bytes - prolog_bytes, CACHE_LINE_SIZE); + epilog_bytes = data_bytes - prolog_bytes - aligned_bytes; + + epilog_ptr = data + prolog_bytes + aligned_bytes; + + if (prolog_bytes) + queue_bounce_data(data, prolog_bytes, data_mode, write); + if (aligned_bytes) + queue_direct_data(aligned_ptr, aligned_bytes, data_mode, write); + if (epilog_bytes) + queue_bounce_data(epilog_ptr, epilog_bytes, data_mode, write); +} + +static void reg_init(void) +{ + uint32_t spi_mode; + uint32_t tx_data_oe_delay, tx_data_delay; + uint32_t mstr_config; + + spi_mode = 0; + + tx_data_oe_delay = 0; + tx_data_delay = 0; + + mstr_config = (tx_data_oe_delay << TX_DATA_OE_DELAY_SHIFT) | + (tx_data_delay << TX_DATA_DELAY_SHIFT) | (SBL_EN) | + (spi_mode << SPI_MODE_SHIFT) | + (PIN_HOLDN) | + (FB_CLK_EN) | + (DMA_ENABLE) | + (FULL_CYCLE_MODE); + + write32(&sc7180_qspi->mstr_cfg, mstr_config); + write32(&sc7180_qspi->ahb_mstr_cfg, 0xA42); + write32(&sc7180_qspi->mstr_int_en, 0x0); + write32(&sc7180_qspi->mstr_int_sts, 0xFFFFFFFF); + write32(&sc7180_qspi->rd_fifo_cfg, 0x0); + write32(&sc7180_qspi->rd_fifo_rst, RESET_FIFO); +} + +void quadspi_init(uint32_t hz) +{ + assert(dcache_line_bytes() == CACHE_LINE_SIZE); + clock_configure_qspi(hz * 4); + configure_gpios(); + reg_init(); +} + +int sc7180_claim_bus(const struct spi_slave *slave) +{ + cs_change(CS_ASSERT); + return 0; +} + +void sc7180_release_bus(const struct spi_slave *slave) +{ + cs_change(CS_DEASSERT); +} + +static int xfer(enum qspi_mode mode, const void *dout, size_t out_bytes, + void *din, size_t in_bytes) +{ + if ((out_bytes && !dout) || (in_bytes && !din) || + (in_bytes && out_bytes)) { + return -1; + } + + queue_data((uint8_t *) (out_bytes ? dout : din), + in_bytes | out_bytes, mode, !!out_bytes); + + flush_chain(); + + return 0; +} + +int sc7180_xfer(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes) +{ + return xfer(SDR_1BIT, dout, out_bytes, din, in_bytes); +} + +int sc7180_xfer_dual(const struct spi_slave *slave, const void *dout, + size_t out_bytes, void *din, size_t in_bytes) +{ + return xfer(SDR_2BIT, dout, out_bytes, din, in_bytes); +} diff --git a/src/soc/qualcomm/sc7180/spi.c b/src/soc/qualcomm/sc7180/spi.c index 5abb81ac0a..c6d4cb15cb 100644 --- a/src/soc/qualcomm/sc7180/spi.c +++ b/src/soc/qualcomm/sc7180/spi.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2018, The Linux Foundation. All rights reserved. + * Copyright (C) 2019, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -15,12 +15,19 @@ #include <spi-generic.h> #include <spi_flash.h> +#include <soc/qspi.h> -static const struct spi_ctrlr spi_ctrlr; +static const struct spi_ctrlr qspi_ctrlr = { + .claim_bus = sc7180_claim_bus, + .release_bus = sc7180_release_bus, + .xfer = sc7180_xfer, + .xfer_dual = sc7180_xfer_dual, + .max_xfer_size = QSPI_MAX_PACKET_COUNT, +}; const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { { - .ctrlr = &spi_ctrlr, + .ctrlr = &qspi_ctrlr, .bus_start = CONFIG_BOOT_DEVICE_SPI_FLASH_BUS, .bus_end = CONFIG_BOOT_DEVICE_SPI_FLASH_BUS, }, |