diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/intel/kunimitsu/devicetree.cb | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb index 21af62a43d..dfba699a94 100644 --- a/src/mainboard/intel/kunimitsu/devicetree.cb +++ b/src/mainboard/intel/kunimitsu/devicetree.cb @@ -60,11 +60,29 @@ chip soc/intel/skylake register "PortUsb20Enable[6]" = "1" # Camera register "PortUsb20Enable[8]" = "1" # Type-A Port (board) + #USB Per Port HS Preemphasis Bias + register "Usb2AfePetxiset" = "{0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07}" + #USB Per Port HS Transmitter Bias + register "Usb2AfeTxiset" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" + #USB Per Port HS Transmitter Emphasis + register "Usb2AfePredeemp" = "{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03}" + #USB Per Port Half Bit Pre-emphasis + register "Usb2AfePehalfbit" = "{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" + register "PortUsb30Enable[0]" = "1" # Type-C Port 1 register "PortUsb30Enable[1]" = "1" # Type-C Port 2 register "PortUsb30Enable[2]" = "1" # Type-A Port (card) register "PortUsb30Enable[3]" = "1" # Type-A Port (board) + #Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + register "Usb3HsioTxDeEmphEnable" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" + #USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + register "Usb3HsioTxDeEmph" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" + #Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + register "Usb3HsioTxDownscaleAmpEnable" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" + #USB 3.0 TX Output Downscale Amplitude Adjustment + register "Usb3HsioTxDownscaleAmp" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" + # Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ \ [PchSerialIoIndexI2C0] = PchSerialIoPci, \ @@ -77,7 +95,7 @@ chip soc/intel/skylake [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ [PchSerialIoIndexUart0] = PchSerialIoPci, \ [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ - [PchSerialIoIndexUart2] = PchSerialIoPci, \ + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \ }" device cpu_cluster 0 on |