diff options
Diffstat (limited to 'targets/tyan/s2735/Config.lb')
| -rw-r--r-- | targets/tyan/s2735/Config.lb | 265 |
1 files changed, 265 insertions, 0 deletions
diff --git a/targets/tyan/s2735/Config.lb b/targets/tyan/s2735/Config.lb new file mode 100644 index 0000000000..7a3faf4f9c --- /dev/null +++ b/targets/tyan/s2735/Config.lb @@ -0,0 +1,265 @@ +# Sample config file for +# the Tyan s2735 +# This will make a target directory of ./s2735 + +loadoptions + +target s2735 + +uses ARCH +uses CONFIG_COMPRESS +uses CONFIG_IOAPIC +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses CONFIG_SMP +uses CONFIG_UDELAY_TSC +uses CPU_FIXUP +uses FALLBACK_SIZE +uses HAVE_FALLBACK_BOOT +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses i586 +uses i686 +uses INTEL_PPRO_MTRR +uses HEAP_SIZE +uses IRQ_SLOT_COUNT +uses MAINBOARD +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +#uses MEMORY_HOLE +uses PAYLOAD_SIZE +uses _RAMBASE +uses _ROMBASE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_OFFSET +uses ROM_SECTION_SIZE +uses ROM_SIZE +uses STACK_SIZE +uses USE_FALLBACK_IMAGE +uses USE_OPTION_TABLE +uses HAVE_OPTION_TABLE +uses CONFIG_CHIP_CONFIGURE + +uses CONFIG_CONSOLE_BTEXT +uses CONFIG_CONSOLE_SERIAL8250 +uses TTYS0_BAUD +#SMDC Support +#uses CONFIG_CONSOLE_SERIAL8250_2 +#uses TTYS1_BAUD +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses DEBUG +uses CONFIG_MAX_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses LINUXBIOS_EXTRA_VERSION +uses XIP_ROM_SIZE +uses XIP_ROM_BASE + +uses CONFIG_FS_STREAM +uses CONFIG_IDE + +uses HAVE_HARD_RESET + +#uses CONFIG_VGABIOS +#uses CONFIG_REALMODE_IDT +#uses CONFIG_PCIBIOS +#uses VGABIOS_START +#uses SCSIFW_START + +# +#uses CONFIG_LSI_SCSI_FW_FIXUP + +option HAVE_OPTION_TABLE=1 +option HAVE_MP_TABLE=1 +option CPU_FIXUP=1 +option CONFIG_UDELAY_TSC=0 +option i686=1 +option i586=1 +option INTEL_PPRO_MTRR=1 +#option ROM_SIZE=524288 +option ROM_SIZE=1048576 + +option HAVE_HARD_RESET=1 + +#option CONFIG_CONSOLE_BTEXT=1 +#option CONFIG_VGABIOS=1 +#option CONFIG_REALMODE_IDT=1 +#option CONFIG_PCIBIOS=1 +#option VGABIOS_START=0xfff8c000 +#option SCSIFW_START=0xfff80000 + +#option CONFIG_FS_STREAM=1 +#option CONFIG_IDE=1 + +option HAVE_FALLBACK_BOOT=1 + +# use the new chip configure code. + +option CONFIG_CHIP_CONFIGURE=1 +#option CONFIG_LSI_SCSI_FW_FIXUP=1 + + +# +### +### Build code to export a programmable irq routing table +### +option HAVE_PIRQ_TABLE=1 +option IRQ_SLOT_COUNT=15 +# +### +### Build code for SMP support +### Only worry about 2 micro processors +### +option CONFIG_SMP=1 +option CONFIG_MAX_CPUS=4 +option CONFIG_LOGICAL_CPUS=1 +option CONFIG_MAX_PHYSICAL_CPUS=2 +# +### +### Build code to setup a generic IOAPIC +### +option CONFIG_IOAPIC=1 +# +### +### MEMORY_HOLE instructs earlymtrr.inc to +### enable caching from 0-640KB and to disable +### caching from 640KB-1MB using fixed MTRRs +### +### Enabling this option breaks SMP because secondary +### CPU identification depends on only variable MTRRs +### being enabled. +### +#option MEMORY_HOLE=0 +# +### +### Clean up the motherboard id strings +### +option MAINBOARD_PART_NUMBER="S2735" +option MAINBOARD_VENDOR="Tyan" +### +### Compute the location and size of where this firmware image +### (linuxBIOS plus bootloader) will live in the boot rom chip. +### +#option FALLBACK_SIZE=524288 +#option FALLBACK_SIZE=98304 +option FALLBACK_SIZE=131072 + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +option ROM_IMAGE_SIZE=65536 + + +### +### Compute where this copy of linuxBIOS will start in the boot rom +### +# +### + +## We do use compressed image +option CONFIG_COMPRESS=1 + +option CONFIG_CONSOLE_SERIAL8250=1 +option TTYS0_BAUD=115200 + +#SMDC support +#option CONFIG_CONSOLE_SERIAL8250_2=1 +#option TTYS1_BAUD=19200 + + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +option DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +option MAXIMUM_CONSOLE_LOGLEVEL=8 + +option DEBUG=1 + +# + +## LinuxBIOS C code runs at this location in RAM +option _RAMBASE=0x004000 + +## +## Use a 32K stack +## +option STACK_SIZE=0x8000 + +## +## Use a 56K heap +## +option HEAP_SIZE=0xe000 + +# +### +### Compute the start location and size size of +### The linuxBIOS bootloader. +### +option CONFIG_ROM_STREAM = 1 + +# +# +romimage "normal" +# 48K for SCSI FW +# option ROM_SIZE = 475136 +# 48K for SCSI FW and 48K for ATI ROM +# option ROM_SIZE = 425984 +# 64K for Etherboot +# option ROM_SIZE = 458752 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" + option USE_FALLBACK_IMAGE=0 + option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) + option ROM_SECTION_OFFSET= 0 + + option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) + option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) + +# option XIP_ROM_SIZE = FALLBACK_SIZE + option XIP_ROM_SIZE = 65536 + option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) + + mainboard tyan/s2735 +# payload ../../../payloads/e1000--ide_disk.zelf +# payload ../../../payloads/filo.elf +# payload ../../../payloads/filo_mem.elf +# payload ../../../payloads/filo_mem_btext.elf +# payload ../../../payloads/filo_btext.zelf + payload ../../../payloads/e1000--filo_btext.zelf +end + +romimage "fallback" + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" + option USE_FALLBACK_IMAGE=1 + option ROM_SECTION_SIZE = FALLBACK_SIZE + option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE) + + option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) + option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) + +# option XIP_ROM_SIZE = FALLBACK_SIZE + option XIP_ROM_SIZE = 65536 + option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) + + mainboard tyan/s2735 +# payload ../../../payloads/e1000--ide_disk.zelf +# payload ../../../payloads/filo_mem.elf +# payload ../../../payloads/filo_mem_btext.elf +# payload ../../../payloads/e1000_btext.zelf + payload ../../../payloads/e1000--filo_btext.zelf + +end + +buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" |