diff options
Diffstat (limited to 'targets/via/epia-m')
| -rw-r--r-- | targets/via/epia-m/Config.512kflash.lb | 57 | ||||
| -rw-r--r-- | targets/via/epia-m/Config.etherboot.lb | 63 | ||||
| -rw-r--r-- | targets/via/epia-m/Config.filo.lb | 56 | ||||
| -rw-r--r-- | targets/via/epia-m/Config.lb | 75 | ||||
| -rw-r--r-- | targets/via/epia-m/Config.vga.filo | 61 |
5 files changed, 24 insertions, 288 deletions
diff --git a/targets/via/epia-m/Config.512kflash.lb b/targets/via/epia-m/Config.512kflash.lb index 6c9bc5d898..c440de983b 100644 --- a/targets/via/epia-m/Config.512kflash.lb +++ b/targets/via/epia-m/Config.512kflash.lb @@ -1,64 +1,14 @@ # Sample config file for EPIA-M # This will make a target directory of ./epia-m.512kflash -loadoptions - target epia-m.512kflash -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION - -option CONFIG_CHIP_CONFIGURE=1 +mainboard via/epia-m option MAXIMUM_CONSOLE_LOGLEVEL=8 option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 - option ROM_SIZE=524288 @@ -82,12 +32,12 @@ option _RAMBASE=0x00004000 ### # -# Arima hdama +# Via EPIA M +# romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi @@ -97,7 +47,6 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi diff --git a/targets/via/epia-m/Config.etherboot.lb b/targets/via/epia-m/Config.etherboot.lb index b19858da98..fea735586f 100644 --- a/targets/via/epia-m/Config.etherboot.lb +++ b/targets/via/epia-m/Config.etherboot.lb @@ -1,66 +1,14 @@ # Sample config file for EPIA-M # This will make a target directory of ./epia-m -loadoptions - target epia-m -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION -uses TTYS0_BAUD - -option TTYS0_BAUD=19200 +mainboard via/epia-m -option CONFIG_CHIP_CONFIGURE=1 - -option MAXIMUM_CONSOLE_LOGLEVEL=7 -option DEFAULT_CONSOLE_LOGLEVEL=7 +option MAXIMUM_CONSOLE_LOGLEVEL=8 +option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 option ROM_SIZE=256*1024 option HAVE_OPTION_TABLE=1 @@ -83,12 +31,12 @@ option _RAMBASE=0x00004000 ### # -# Arima hdama +# Via EPIA-M +# romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi @@ -98,7 +46,6 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi diff --git a/targets/via/epia-m/Config.filo.lb b/targets/via/epia-m/Config.filo.lb index 8afc770066..3cdfe8c224 100644 --- a/targets/via/epia-m/Config.filo.lb +++ b/targets/via/epia-m/Config.filo.lb @@ -1,63 +1,14 @@ # Sample config file for EPIA-M # This will make a target directory of ./epia-m -loadoptions - target epia-m -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION - -option CONFIG_CHIP_CONFIGURE=1 +mainboard via/epia-m option MAXIMUM_CONSOLE_LOGLEVEL=8 option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 option ROM_SIZE=256*1024 option HAVE_OPTION_TABLE=1 @@ -80,12 +31,12 @@ option _RAMBASE=0x00004000 ### # -# Arima hdama +# EPIA-M +# romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi @@ -96,7 +47,6 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi diff --git a/targets/via/epia-m/Config.lb b/targets/via/epia-m/Config.lb index ca87c7ba47..baf066eb54 100644 --- a/targets/via/epia-m/Config.lb +++ b/targets/via/epia-m/Config.lb @@ -1,78 +1,24 @@ # Sample config file for EPIA-M # This will make a target directory of ./epia-m -loadoptions - target epia-m -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION -uses HAVE_ACPI_TABLES -uses CONFIG_LEGACY_VGABIOS -uses VGABIOS_START -uses VGABIOS_START -option CONFIG_CHIP_CONFIGURE=1 +mainboard via/epia-m option MAXIMUM_CONSOLE_LOGLEVEL=8 option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option HAVE_ACPI_TABLES=1 -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 + option ROM_SIZE=256*1024 -option CONFIG_LEGACY_VGABIOS=1 option HAVE_OPTION_TABLE=1 option CONFIG_ROM_STREAM=1 option HAVE_FALLBACK_BOOT=1 -option VGABIOS_START=0xfffc0000 ### ### Compute the location and size of where this firmware image ### (linuxBIOS plus bootloader) will live in the boot rom chip. ### -option FALLBACK_SIZE=0x18000 +option FALLBACK_SIZE=131072 ## LinuxBIOS C code runs at this location in RAM option _RAMBASE=0x00004000 @@ -84,29 +30,26 @@ option _RAMBASE=0x00004000 ### # -# Arima hdama +# Via EPIA-M +# romimage "normal" option USE_FALLBACK_IMAGE=0 - option ROM_IMAGE_SIZE=0xc000 - option ROM_SECTION_OFFSET=0x10000 - option ROM_SECTION_SIZE=0x18000 + option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi - payload /filo.elf + payload ../../../payloads/filo.elf end romimage "fallback" option USE_FALLBACK_IMAGE=1 - option ROM_IMAGE_SIZE=0xc000 + option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi - payload /filo.elf + payload ../../../payloads/filo.elf end buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" diff --git a/targets/via/epia-m/Config.vga.filo b/targets/via/epia-m/Config.vga.filo index ca87c7ba47..e381bc918e 100644 --- a/targets/via/epia-m/Config.vga.filo +++ b/targets/via/epia-m/Config.vga.filo @@ -1,66 +1,14 @@ # Sample config file for EPIA-M # This will make a target directory of ./epia-m -loadoptions - target epia-m -uses ARCH -uses CONFIG_COMPRESS -uses CONFIG_IOAPIC -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses CONFIG_UDELAY_TSC -uses CPU_FIXUP -uses FALLBACK_SIZE -uses HAVE_FALLBACK_BOOT -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_HARD_RESET -uses i586 -uses i686 -uses INTEL_PPRO_MTRR -uses HEAP_SIZE -uses IRQ_SLOT_COUNT -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses CONFIG_SMP -uses CONFIG_MAX_CPUS -uses MEMORY_HOLE -uses PAYLOAD_SIZE -uses _RAMBASE -uses _ROMBASE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_OFFSET -uses ROM_SECTION_SIZE -uses ROM_SIZE -uses STACK_SIZE -uses USE_FALLBACK_IMAGE -uses USE_OPTION_TABLE -uses HAVE_OPTION_TABLE -uses MAXIMUM_CONSOLE_LOGLEVEL -uses DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses MAINBOARD -uses CONFIG_CHIP_CONFIGURE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses LINUXBIOS_EXTRA_VERSION -uses HAVE_ACPI_TABLES -uses CONFIG_LEGACY_VGABIOS -uses VGABIOS_START -uses VGABIOS_START -option CONFIG_CHIP_CONFIGURE=1 +mainboard via/epia-m option MAXIMUM_CONSOLE_LOGLEVEL=8 option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option HAVE_ACPI_TABLES=1 -option CPU_FIXUP=1 -option CONFIG_UDELAY_TSC=0 -option i686=1 -option i586=1 -option INTEL_PPRO_MTRR=1 + option ROM_SIZE=256*1024 option CONFIG_LEGACY_VGABIOS=1 option HAVE_OPTION_TABLE=1 @@ -84,14 +32,14 @@ option _RAMBASE=0x00004000 ### # -# Arima hdama +# EPIA-M +# romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0xc000 option ROM_SECTION_OFFSET=0x10000 option ROM_SECTION_SIZE=0x18000 option LINUXBIOS_EXTRA_VERSION=".0Normal" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi @@ -102,7 +50,6 @@ romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0xc000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" - mainboard via/epia-m # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf # payload ../../../../../lnxieepro100.ebi |