diff options
Diffstat (limited to 'util/blobtool/it8718f-ec.spec')
| -rw-r--r-- | util/blobtool/it8718f-ec.spec | 368 |
1 files changed, 368 insertions, 0 deletions
diff --git a/util/blobtool/it8718f-ec.spec b/util/blobtool/it8718f-ec.spec new file mode 100644 index 0000000000..7fa325f203 --- /dev/null +++ b/util/blobtool/it8718f-ec.spec @@ -0,0 +1,368 @@ +# ITE IT8718F SuperIO EC registers +{ + # 00 Configuration register + "conf00_start" : 1, + "conf00_smien" : 1, + "conf00_irqen" : 1, + "conf00_irqclr" : 1, + "conf00_ro_one" : 1, + "conf00_copen" : 1, + "conf00_vbat" : 1, + "conf00_initreset" : 1, + + # 01 Interrupt Status register 1 + "irq1_maxfantac1" : 1, + "irq1_maxfantac2" : 1, + "irq1_maxfantac3" : 1, + "irq1_maxfantac4" : 1, + "irq1_copen" : 1, + "irq1_reserved0" : 1, + "irq1_maxfantac5" : 1, + "irq1_reserved1" : 1, + + # 02 Interrupt Status register 2 + "irq2_limit_vin"[8] : 1, + + # 03 Interrupt Status register 3 + "irq3_limit_temp1" : 1, + "irq3_limit_temp2" : 1, + "irq3_limit_temp3" : 1, + "irq3_reserved" : 5, + + # 04 SMI Mask register 1 + "smi1_dis_fantac1" : 1, + "smi1_dis_fantac2" : 1, + "smi1_dis_fantac3" : 1, + "smi1_dis_fantac4" : 1, + "smi1_dis_copen" : 1, + "smi1_reserved0" : 1, + "smi1_dis_fantac5" : 1, + "smi1_reserved1" : 1, + + # 05 SMI Mask register 2 + "smi2_dis_vin"[8] : 1, + + # 06 SMI Mask register 3 + "smi3_dis_temp1" : 1, + "smi3_dis_temp2" : 1, + "smi3_dis_temp3" : 1, + "smi3_reserved" : 5, + + # 07 Interrupt Mask register 1 + "irqmask1_fantac1" : 1, + "irqmask1_fantac2" : 1, + "irqmask1_fantac3" : 1, + "irqmask1_fantac4" : 1, + "irqmask1_copen" : 1, + "irqmask1_reserved0" : 1, + "irqmask1_fantac5" : 1, + "irqmask1_reserved1" : 1, + + # 08 Interrupt Mask register 2 + "irqmask2_vin"[8] : 1, + + # 09 Interrupt Mask register 3 + "irqmask3_temp1" : 1, + "irqmask3_temp2" : 1, + "irqmask3_temp3" : 1, + "irqmask3_reserved" : 4, + "irqmask3_extsensor" : 1, + + # 0a Interface Selection register + "iface_reserved" : 4, + "iface_extsensor_select": 3, + "iface_pseudo_eoc" : 1, + + # 0b Fan PWM smoothing step selection reg + "fanpwm_reserved" : 6, + "fanpwm_smoothing_step" : 2, + + # 0c Fan Tachometer 16 bit enable register + "fantach16_en_tac1" : 1, + "fantach16_en_tac2" : 1, + "fantach16_en_tac3" : 1, + "fantach16_tmpin1_enh" : 1, + "fantach16_en_tac4" : 1, + "fantach16_en_tac5" : 1, + "fantach16_tmpin2_enh" : 1, + "fantach16_tmpin3_enh" : 1, + + # 0d-0f Fan Tachmometer read registers + "fantach_lo_counts1" : 8, + "fantach_lo_counts2" : 8, + "fantach_lo_counts3" : 8, + + # 10-12 Fan Tachometer limit registers + "fantach_lo_limit1" : 8, + "fantach_lo_limit2" : 8, + "fantach_lo_limit3" : 8, + + # 13 Fan controller main control register + "fanctlmain_mode1" : 1, + "fanctlmain_mode2" : 1, + "fanctlmain_mode3" : 1, + "fanctlmain_reserved0" : 1, + "fanctlmain_en_tac1" : 1, + "fanctlmain_en_tac2" : 1, + "fanctlmain_en_tac3" : 1, + "fanctlmain_reserved1" : 1, + + # 14 FAN_CTL control register + "fanctl_enable1" : 1, + "fanctl_enable2" : 1, + "fanctl_enable3" : 1, + "fanctl_minduty_sel" : 1, + # 000: 48Mhz (PWM Frequency 375Khz) + # 001: 24Mhz (PWM Frequency 187.5Khz) + # 010: 12Mhz (PWM Frequency 93.75Khz) + # 011: 8Mhz (PWM Frequency 62.5Khz) + # 100: 6Mhz (PWM Frequency 46.875Khz) + # 101: 3Mhz (PWM Frequency 23.43Khz) + # 110: 1.5Mhz (PWM Frequency 11.7Khz) + # 111: 0.75Mhz (PWM Frequency 5.86Khz) + "fanctl_pwm_base_clock" : 3, + "fanctl_allpolarity" : 1, + + # 15 FAN_CTL1 PWM control register + "fanctl1_tmpin_sel" : 2, + "fanctl1_steps" : 5, + "fanctl1_pwm_mode" : 1, + + # 16 FAN_CTL2 PWM control register + "fanctl2_tmpin_sel" : 2, + "fanctl2_steps" : 5, + "fanctl2_pwm_mode" : 1, + + # 17 FAN_CTL3 PWM control register + "fanctl3_tmpin_sel" : 2, + "fanctl3_steps" : 5, + "fanctl3_pwm_mode" : 1, + + # 18-1a Fan Tachometer extended read registers + "fantach_hi_counts1" : 8, + "fantach_hi_counts2" : 8, + "fantach_hi_counts3" : 8, + + # 1b-1d Fan Tachometer extended limit registers + "fantach_hi_limit1" : 8, + "fantach_hi_limit2" : 8, + "fantach_hi_limit3" : 8, + + "reserved1e" : 8, + "reserved1f" : 8, + + + # 20-27 Reading registers + "vin"[8] : 8, + + "vbat" : 8, + "tmpin1" : 8, + "tmpin2" : 8, + "tmpin3" : 8, + "reserved2c" : 8, + "reserved2d" : 8, + "reserved2e" : 8, + "reserved2f" : 8, + "limit_hi_vin0" : 8, + "limit_lo_vin0" : 8, + "limit_hi_vin1" : 8, + "limit_lo_vin1" : 8, + "limit_hi_vin2" : 8, + "limit_lo_vin2" : 8, + "limit_hi_vin3" : 8, + "limit_lo_vin3" : 8, + "limit_hi_vin4" : 8, + "limit_lo_vin4" : 8, + "limit_hi_vin5" : 8, + "limit_lo_vin5" : 8, + "limit_hi_vin6" : 8, + "limit_lo_vin6" : 8, + "limit_hi_vin7" : 8, + "limit_lo_vin7" : 8, + "limit_hi_tmpin1" : 8, + "limit_lo_tmpin1" : 8, + "limit_hi_tmpin2" : 8, + "limit_lo_tmpin2" : 8, + "limit_hi_tmpin3" : 8, + "limit_lo_tmpin3" : 8, + + "reserved46" : 8, + "reserved47" : 8, + "reserved48" : 8, + "reserved49" : 8, + "reserved4a" : 8, + "reserved4b" : 8, + "reserved4c" : 8, + "reserved4d" : 8, + "reserved4e" : 8, + "reserved4f" : 8, + + # 50 ADC Voltage channel enable register + "adc_scan_enable_vin"[8]: 1, + + # 51 ADC Temperature channel enable register + "therm_diode_tmpin1" : 1, + "therm_diode_tmpin2" : 1, + "therm_diode_tmpin3" : 1, + # Mututally exclusive settings + "therm_resistor_tmpin1" : 1, + "therm_resistor_tmpin2" : 1, + "therm_resistor_tmpin3" : 1, + "therm_reserved" : 2, + + "therm_limit_tmpin1" : 8, + "therm_limit_tmpin2" : 8, + "therm_limit_tmpin3" : 8, + + # 55 Temperature extra channel enable reg + "therm_resistor_vin4" : 1, + "therm_resistor_vin5" : 1, + "therm_resistor_vin6" : 1, + "adc_fanctl2_pwm_duty" : 1, + # 000: 48Mhz (PWM Frequency 375Khz) + # 001: 24Mhz (PWM Frequency 187.5Khz) + # 010: 12Mhz (PWM Frequency 93.75Khz) + # 011: 8Mhz (PWM Frequency 62.5Khz) + # 100: 6Mhz (PWM Frequency 46.875Khz) + # 101: 3Mhz (PWM Frequency 23.43Khz) + # 110: 1.5Mhz (PWM Frequency 11.7Khz) + # 111: 0.75Mhz (PWM Frequency 5.86Khz) + "adc_fanctl2_pwm_bclk" : 3, + "adc_tmpin3_ext_select" : 1, + + "thermal_zero_diode1" : 8, + "thermal_zero_diode2" : 8, + "ite_vendor_id" : 8, + "thermal_zero_diode3" : 8, + "reserved5a" : 8, + "ite_code_id" : 8, + + "beep_fantac" : 1, + "beep_vin" : 1, + "beep_tmpin" : 1, + "beep_reserved" : 1, + # ADC clock select + # 000: 500Khz (Default) + # 001: 250Khz + # 010: 125K + # 011: 62.5Khz + # 100: 31.25Khz + # 101: 24Mhz + # 110: 1Mhz + # 111: 2Mhz + "adc_clock_select" : 3, + "thermal_zero_adj_en" : 1, + + "beep_fan_freq_div" : 4, + "beep_fan_tone_div" : 4, + "beep_volt_freq_div" : 4, + "beep_volt_tone_div" : 4, + "beep_temp_freq_div" : 4, + "beep_temp_tone_div" : 4, + + # 60 SmartGuardian registers + "sguard1_temp_lim_off" : 8, + "sguard1_temp_lim_fan" : 8, + "reserved62" : 8, + "sguard1_pwm_start" : 7, + "sguard1_pwm_slope6" : 1, + "sguard1_pwm_slope05" : 6, + "sguard1_pwm_reserved" : 1, + "sguard1_fan_smooth_en" : 1, + "sguard1_temp_interval" : 5, + "sguard1_temp_reserved" : 2, + "sguard1_temp_pwm_lin" : 1, + "reserved66" : 8, + "reserved67" : 8, + "sguard2_temp_lim_off" : 8, + "sguard2_temp_lim_fan" : 8, + "reserved6a" : 8, + "sguard2_pwm_start" : 7, + "sguard2_pwm_slope6" : 1, + "sguard2_pwm_slope05" : 6, + "sguard2_pwm_reserved" : 1, + "sguard2_fan_smooth_en" : 1, + "sguard2_temp_interval" : 5, + "sguard2_temp_reserved" : 2, + "sguard2_temp_pwm_lin" : 1, + "reserved6e" : 8, + "reserved6f" : 8, + "sguard3_temp_lim_off" : 8, + "sguard3_temp_lim_fan" : 8, + "reserved72" : 8, + "sguard3_pwm_start" : 7, + "sguard3_pwm_slope6" : 1, + "sguard3_pwm_slope05" : 6, + "sguard3_pwm_reserved" : 1, + "sguard3_fan_smooth_en" : 1, + "sguard3_temp_interval" : 5, + "sguard3_temp_reserved" : 2, + "sguard3_temp_pwm_lin" : 1, + "reserved76" : 8, + "reserved77" : 8, + "reserved78" : 8, + "reserved79" : 8, + "reserved7a" : 8, + "reserved7b" : 8, + "reserved7c" : 8, + "reserved7d" : 8, + "reserved7e" : 8, + "reserved7f" : 8, + + # 80 Fan Tachometer 4-5 read registers + "fantach_lo_counts4" : 8, + "fantach_hi_counts4" : 8, + "fantach_lo_counts5" : 8, + "fantach_hi_counts5" : 8, + "fantach_lo_limit4" : 8, + "fantach_hi_limit4" : 8, + "fantach_lo_limit5" : 8, + "fantach_hi_limit5" : 8, + + # 88 External temperature sensor host status + "ext_host_busy" : 1, + "ext_host_fnsh" : 1, + "ext_host_r_fcs_error" : 1, + "ext_host_w_fcs_error" : 1, + "ext_host_peci_highz" : 1, + "ext_host_sst_slave" : 1, + "ext_host_sst_bus" : 1, + "ext_host_data_fifo_clr": 1, + + "ext_host_target_addr" : 8, + "ext_host_write_length" : 8, + "ext_host_read_length" : 8, + "ext_host_cmd" : 8, + "ext_host_writedata" : 8, + + "ext_hostctl_start" : 1, + "ext_hostctl_sst_amdsi" : 1, + "ext_hostctl_sst_ctl" : 1, + "ext_hostctl_resetfifo" : 1, + "ext_hostctl_fcs_abort" : 1, + "ext_hostctl_start_en" : 1, + # Auto-Start Control + # The host will start the transaction + # at a regular rate automatically. + # 00: 32 Hz + # 01: 16 Hz + # 10: 8 Hz + # 11: 4 Hz + "ext_hostctl_start_ctl" : 2, + + "ext_host_readdata" : 8, + + "fan1_temp_limit_start" : 8, + "fan1_slope_pwm" : 7, + "fan1_temp_input_sel0" : 1, + "fan1_ctlmode_temp_ivl" : 5, + "fan1_ctlmode_target" : 2, + "fan1_temp_input_sel1" : 1, + "reserved93" : 8, + "fan2_temp_limit_start" : 8, + "fan2_slope_pwm" : 7, + "fan2_temp_input_sel0" : 1, + "fan2_ctlmode_temp_ivl" : 5, + "fan2_ctlmode_target" : 2, + "fan2_temp_input_sel1" : 1 +} |