diff options
Diffstat (limited to 'util/flashrom')
| -rw-r--r-- | util/flashrom/spi.c | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/util/flashrom/spi.c b/util/flashrom/spi.c new file mode 100644 index 0000000000..5071f52517 --- /dev/null +++ b/util/flashrom/spi.c @@ -0,0 +1,199 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2007 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Contains the generic SPI framework + */ + +#include <stdio.h> +#include <pci/pci.h> +#include <stdint.h> +#include <string.h> +#include "flash.h" + +#define ITE_SUPERIO_PORT1 0x2e +#define ITE_SUPERIO_PORT2 0x4e + +#define JEDEC_RDID {0x9f} +#define JEDEC_RDID_OUTSIZE 0x01 +#define JEDEC_RDID_INSIZE 0x03 + +static uint16_t it8716f_flashport = 0; + +/* Generic Super I/O helper functions */ +uint8_t regval(uint16_t port, uint8_t reg) +{ + outb(reg, port); + return inb(port + 1); +} + +void regwrite(uint16_t port, uint8_t reg, uint8_t val) +{ + outb(reg, port); + outb(val, port + 1); +} + +/* Helper functions for most recent ITE IT87xx Super I/O chips */ +#define CHIP_ID_BYTE1_REG 0x20 +#define CHIP_ID_BYTE2_REG 0x21 +static void enter_conf_mode_ite(uint16_t port) +{ + outb(0x87, port); + outb(0x01, port); + outb(0x55, port); + if (port == ITE_SUPERIO_PORT1) + outb(0x55, port); + else + outb(0xaa, port); +} + +static void exit_conf_mode_ite(uint16_t port) +{ + regwrite(port, 0x02, 0x02); +} + +static uint16_t find_ite_serial_flash_port(uint16_t port) +{ + uint8_t tmp = 0; + uint16_t id, flashport = 0; + + enter_conf_mode_ite(port); + + id = regval(port, CHIP_ID_BYTE1_REG) << 8; + id |= regval(port, CHIP_ID_BYTE2_REG); + + /* TODO: Handle more IT87xx if they support flash translation */ + if (id == 0x8716) { + /* NOLDN, reg 0x24, mask out lowest bit (suspend) */ + tmp = regval(port, 0x24) & 0xFE; + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis"); + printf("LPC write to serial flash %sabled\n", + (tmp & 1 << 4) ? "en" : "dis"); + printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29); + /* LDN 0x7, reg 0x64/0x65 */ + regwrite(port, 0x07, 0x7); + flashport = regval(port, 0x64) << 8; + flashport |= regval(port, 0x65); + } + exit_conf_mode_ite(port); + return flashport; +} + +/* The IT8716F only supports commands with length 1,2,4,5 bytes including + command byte and can not read more than 3 bytes from the device. + This function expects writearr[0] to be the first byte sent to the device, + whereas the IT8716F splits commands internally into address and non-address + commands with the address in inverse wire order. That's why the register + ordering in case 4 and 5 may seem strange. */ +static int it8716f_spi_command(uint16_t port, unsigned char writecnt, unsigned char readcnt, const unsigned char *writearr, unsigned char *readarr) +{ + uint8_t busy, writeenc; + do { + busy = inb(port) & 0x80; + } while (busy); + if (readcnt > 3) { + printf("%s called with unsupported readcnt %i\n", + __FUNCTION__, readcnt); + return 1; + } + switch (writecnt) { + case 1: + outb(writearr[0], port + 1); + writeenc = 0x0; + break; + case 2: + outb(writearr[0], port + 1); + outb(writearr[1], port + 7); + writeenc = 0x1; + break; + case 4: + outb(writearr[0], port + 1); + outb(writearr[1], port + 4); + outb(writearr[2], port + 3); + outb(writearr[3], port + 2); + writeenc = 0x2; + break; + case 5: + outb(writearr[0], port + 1); + outb(writearr[1], port + 4); + outb(writearr[2], port + 3); + outb(writearr[3], port + 2); + outb(writearr[4], port + 7); + writeenc = 0x3; + break; + default: + printf("%s called with unsupported writecnt %i\n", + __FUNCTION__, writecnt); + return 1; + } + /* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note: + * We can't use writecnt directly, but have to use a strange encoding + */ + outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port); + do { + busy = inb(port) & 0x80; + } while (busy); + readarr[0] = inb(port + 5); + readarr[1] = inb(port + 6); + readarr[2] = inb(port + 7); + return 0; +} + +static int it8716f_serial_rdid(uint16_t port, unsigned char *readarr) +{ + const unsigned char cmd[] = JEDEC_RDID; + + if (it8716f_spi_command(port, JEDEC_RDID_OUTSIZE, JEDEC_RDID_INSIZE, cmd, readarr)) + return 1; + printf("RDID returned %02x %02x %02x\n", readarr[0], readarr[1], readarr[2]); + return 0; +} + +int it87xx_probe_serial_flash(const char *name) +{ + it8716f_flashport = find_ite_serial_flash_port(ITE_SUPERIO_PORT1); + if (!it8716f_flashport) + it8716f_flashport = find_ite_serial_flash_port(ITE_SUPERIO_PORT2); + return (!it8716f_flashport); +} + +int probe_spi(struct flashchip *flash) +{ + unsigned char readarr[3]; + uint8_t manuf_id; + uint16_t model_id; + if (it8716f_flashport) { + it8716f_serial_rdid(it8716f_flashport, readarr); + manuf_id = readarr[0]; + model_id = (readarr[1] << 8) | readarr[2]; + printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, manuf_id, model_id); + if (manuf_id == flash->manufacture_id && model_id == flash->model_id) + return 1; + } + + return 0; +} + |