summaryrefslogtreecommitdiff
path: root/util/romcc/tests
diff options
context:
space:
mode:
Diffstat (limited to 'util/romcc/tests')
-rw-r--r--util/romcc/tests/hello_world.c128
-rw-r--r--util/romcc/tests/raminit_test.c1283
-rw-r--r--util/romcc/tests/raminit_test2.c1283
-rw-r--r--util/romcc/tests/simple_test.c252
-rw-r--r--util/romcc/tests/simple_test10.c31
-rw-r--r--util/romcc/tests/simple_test11.c13
-rw-r--r--util/romcc/tests/simple_test12.c9
-rw-r--r--util/romcc/tests/simple_test13.c23
-rw-r--r--util/romcc/tests/simple_test14.c288
-rw-r--r--util/romcc/tests/simple_test15.c47
-rw-r--r--util/romcc/tests/simple_test2.c36
-rw-r--r--util/romcc/tests/simple_test3.c38
-rw-r--r--util/romcc/tests/simple_test4.c509
-rw-r--r--util/romcc/tests/simple_test5.c310
-rw-r--r--util/romcc/tests/simple_test6.c269
-rw-r--r--util/romcc/tests/simple_test7.c12
-rw-r--r--util/romcc/tests/simple_test8.c12
-rw-r--r--util/romcc/tests/simple_test9.c12
18 files changed, 4555 insertions, 0 deletions
diff --git a/util/romcc/tests/hello_world.c b/util/romcc/tests/hello_world.c
new file mode 100644
index 0000000000..6dd80d89b8
--- /dev/null
+++ b/util/romcc/tests/hello_world.c
@@ -0,0 +1,128 @@
+void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+unsigned char inb(unsigned short port)
+{
+ return __builtin_inb(port);
+}
+
+/* Base Address */
+#ifndef TTYS0_BASE
+#define TTYS0_BASE 0x3f8
+#endif
+
+#ifndef TTYS0_BAUD
+#define TTYS0_BAUD 115200
+#endif
+
+#if ((115200%TTYS0_BAUD) != 0)
+#error Bad ttys0 baud rate
+#endif
+
+#if TTYS0_BAUD == 115200
+#define TTYS0_DIV (1)
+#else
+#define TTYS0_DIV (115200/TTYS0_BAUD)
+#endif
+
+/* Line Control Settings */
+#ifndef TTYS0_LCS
+/* Set 8bit, 1 stop bit, no parity */
+#define TTYS0_LCS 0x3
+#endif
+
+#define UART_LCS TTYS0_LCS
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+int uart_can_tx_byte(void)
+{
+ return inb(TTYS0_BASE + UART_LSR) & 0x20;
+}
+
+void uart_wait_to_tx_byte(void)
+{
+ while(!uart_can_tx_byte())
+ ;
+}
+
+void uart_wait_until_sent(void)
+{
+ while(!(inb(TTYS0_BASE + UART_LSR) & 0x40))
+ ;
+}
+
+static void uart_tx_byte(unsigned char data)
+{
+ uart_wait_to_tx_byte();
+ outb(data, TTYS0_BASE + UART_TBR);
+ /* Make certain the data clears the fifos */
+ uart_wait_until_sent();
+}
+
+
+void uart_init(void)
+{
+ /* disable interrupts */
+ outb(0x0, TTYS0_BASE + UART_IER);
+ /* enable fifo's */
+ outb(0x01, TTYS0_BASE + UART_FCR);
+ /* Set Baud Rate Divisor to 12 ==> 115200 Baud */
+ outb(0x80 | UART_LCS, TTYS0_BASE + UART_LCR);
+ outb(TTYS0_DIV & 0xFF, TTYS0_BASE + UART_DLL);
+ outb((TTYS0_DIV >> 8) & 0xFF, TTYS0_BASE + UART_DLM);
+ outb(UART_LCS, TTYS0_BASE + UART_LCR);
+}
+
+
+void __console_tx_char(unsigned char byte)
+{
+ uart_tx_byte(byte);
+
+}
+
+void __console_tx_string(char *str)
+{
+ unsigned char ch;
+ while((ch = *str++) != '\0') {
+ __console_tx_char(ch);
+ }
+}
+
+
+void print_debug_char(unsigned char byte) { __console_tx_char(byte); }
+void print_debug(char *str) { __console_tx_string(str); }
+
+void main(void)
+{
+ static const char msg[] = "hello world\r\n";
+ uart_init();
+#if 0
+ print_debug(msg);
+#endif
+#if 1
+ print_debug("hello world\r\n");
+ print_debug("how are you today\r\n");
+#endif
+ while(1) {
+ ;
+ }
+}
diff --git a/util/romcc/tests/raminit_test.c b/util/romcc/tests/raminit_test.c
new file mode 100644
index 0000000000..8dd9c977e5
--- /dev/null
+++ b/util/romcc/tests/raminit_test.c
@@ -0,0 +1,1283 @@
+#define HAVE_STRING_SUPPORT 0
+#define HAVE_CAST_SUPPORT 0
+#define HAVE_STATIC_ARRAY_SUPPORT 0
+#define HAVE_POINTER_SUPPORT 0
+
+void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+void outw(unsigned short value, unsigned short port)
+{
+ __builtin_outw(value, port);
+}
+
+void outl(unsigned int value, unsigned short port)
+{
+ __builtin_outl(value, port);
+}
+
+unsigned char inb(unsigned short port)
+{
+ return __builtin_inb(port);
+}
+
+unsigned char inw(unsigned short port)
+{
+ return __builtin_inw(port);
+}
+
+unsigned char inl(unsigned short port)
+{
+ return __builtin_inl(port);
+}
+
+static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where)
+{
+ return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3);
+}
+
+static unsigned char pcibios_read_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inb(0xCFC + (where & 3));
+}
+
+static unsigned short pcibios_read_config_word(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inw(0xCFC + (where & 2));
+}
+
+static unsigned int pcibios_read_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inl(0xCFC);
+}
+
+
+static void pcibios_write_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned char value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outb(value, 0xCFC + (where & 3));
+}
+
+static void pcibios_write_config_word(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned short value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outw(value, 0xCFC + (where & 2));
+}
+
+static void pcibios_write_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned int value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+/* Base Address */
+#ifndef TTYS0_BASE
+#define TTYS0_BASE 0x3f8
+#endif
+
+#ifndef TTYS0_BAUD
+#define TTYS0_BAUD 115200
+#endif
+
+#if ((115200%TTYS0_BAUD) != 0)
+#error Bad ttys0 baud rate
+#endif
+
+#define TTYS0_DIV (115200/TTYS0_BAUD)
+
+/* Line Control Settings */
+#ifndef TTYS0_LCS
+/* Set 8bit, 1 stop bit, no parity */
+#define TTYS0_LCS 0x3
+#endif
+
+#define UART_LCS TTYS0_LCS
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+int uart_can_tx_byte(void)
+{
+ return inb(TTYS0_BASE + UART_LSR) & 0x20;
+}
+
+void uart_wait_to_tx_byte(void)
+{
+ while(!uart_can_tx_byte())
+ ;
+}
+
+void uart_wait_until_sent(void)
+{
+ while(!(inb(TTYS0_BASE + UART_LSR) & 0x40))
+ ;
+}
+
+void uart_tx_byte(unsigned char data)
+{
+ uart_wait_to_tx_byte();
+ outb(data, TTYS0_BASE + UART_TBR);
+ /* Make certain the data clears the fifos */
+ uart_wait_until_sent();
+}
+
+void uart_init(void)
+{
+ /* disable interrupts */
+ outb(0x0, TTYS0_BASE + UART_IER);
+ /* enable fifo's */
+ outb(0x01, TTYS0_BASE + UART_FCR);
+ /* Set Baud Rate Divisor to 12 ==> 115200 Baud */
+ outb(0x80 | UART_LCS, TTYS0_BASE + UART_LCR);
+ outb(TTYS0_DIV & 0xFF, TTYS0_BASE + UART_DLL);
+ outb((TTYS0_DIV >> 8) & 0xFF, TTYS0_BASE + UART_DLM);
+ outb(UART_LCS, TTYS0_BASE + UART_LCR);
+}
+
+void __console_tx_char(unsigned char byte)
+{
+ uart_tx_byte(byte);
+}
+void __console_tx_nibble(unsigned nibble)
+{
+ unsigned char digit;
+ digit = nibble + '0';
+ if (digit > '9') {
+ digit += 39;
+ }
+ __console_tx_char(digit);
+}
+void __console_tx_hex8(unsigned char byte)
+{
+ __console_tx_nibble(byte >> 4);
+ __console_tx_nibble(byte & 0x0f);
+}
+
+void __console_tx_hex32(unsigned char value)
+{
+ __console_tx_nibble((value >> 28) & 0x0f);
+ __console_tx_nibble((value >> 24) & 0x0f);
+ __console_tx_nibble((value >> 20) & 0x0f);
+ __console_tx_nibble((value >> 16) & 0x0f);
+ __console_tx_nibble((value >> 12) & 0x0f);
+ __console_tx_nibble((value >> 8) & 0x0f);
+ __console_tx_nibble((value >> 4) & 0x0f);
+ __console_tx_nibble(value & 0x0f);
+}
+
+#if HAVE_STRING_SUPPORT
+void __console_tx_string(char *str)
+{
+ unsigned char ch;
+ while((ch = *str++) != '\0') {
+ __console_tx_byte(ch);
+ }
+}
+#else
+void __console_tx_string(char *str)
+{
+}
+#endif
+
+
+void print_emerg_char(unsigned char byte) { __console_tx_char(byte); }
+void print_emerg_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_emerg_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_emerg(char *str) { __console_tx_string(str); }
+
+void print_alert_char(unsigned char byte) { __console_tx_char(byte); }
+void print_alert_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_alert_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_alert(char *str) { __console_tx_string(str); }
+
+void print_crit_char(unsigned char byte) { __console_tx_char(byte); }
+void print_crit_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_crit_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_crit(char *str) { __console_tx_string(str); }
+
+void print_err_char(unsigned char byte) { __console_tx_char(byte); }
+void print_err_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_err_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_err(char *str) { __console_tx_string(str); }
+
+void print_warning_char(unsigned char byte) { __console_tx_char(byte); }
+void print_warning_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_warning_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_warning(char *str) { __console_tx_string(str); }
+
+void print_notice_char(unsigned char byte) { __console_tx_char(byte); }
+void print_notice_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_notice_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_notice(char *str) { __console_tx_string(str); }
+
+void print_info_char(unsigned char byte) { __console_tx_char(byte); }
+void print_info_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_info_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_info(char *str) { __console_tx_string(str); }
+
+void print_debug_char(unsigned char byte) { __console_tx_char(byte); }
+void print_debug_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_debug_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_debug(char *str) { __console_tx_string(str); }
+
+void print_spew_char(unsigned char byte) { __console_tx_char(byte); }
+void print_spew_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_spew_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_spew(char *str) { __console_tx_string(str); }
+
+#define PIIX4_DEVFN 0x90
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+
+#define PM_BUS 0
+#define PM_DEVFN (PIIX4_DEVFN+3)
+
+#define SMBUS_IO_BASE 0x1000
+#define SMBHSTSTAT 0
+#define SMBHSTCTL 2
+#define SMBHSTCMD 3
+#define SMBHSTADD 4
+#define SMBHSTDAT0 5
+#define SMBHSTDAT1 6
+#define SMBBLKDAT 7
+
+void smbus_enable(void)
+{
+ /* iobase addr */
+ pcibios_write_config_dword(PM_BUS, PM_DEVFN, 0x90, SMBUS_IO_BASE | 1);
+ /* smbus enable */
+ pcibios_write_config_byte(PM_BUS, PM_DEVFN, 0xd2, (0x4 << 1) | 1);
+ /* iospace enable */
+ pcibios_write_config_word(PM_BUS, PM_DEVFN, 0x4, 1);
+}
+
+void smbus_setup(void)
+{
+ outb(0, SMBUS_IO_BASE + SMBHSTSTAT);
+}
+
+static void smbus_wait_until_ready(void)
+{
+ while((inb(SMBUS_IO_BASE + SMBHSTSTAT) & 1) == 1) {
+ /* nop */
+ }
+}
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }while((byte &1) == 1);
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+}
+
+int smbus_read_byte(unsigned device, unsigned address)
+{
+ unsigned char host_status_register;
+ unsigned char byte;
+ int result;
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* read results of transaction */
+ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+
+ result = byte;
+ if (host_status_register != 0x02) {
+ result = -1;
+ }
+ return result;
+}
+
+#define I440GX_BUS 0
+#define I440GX_DEVFN ((0x00 << 3) + 0)
+
+#define USE_ECC 0
+
+#define CAS_LATENCY 3
+
+ /* CAS latency 2 */
+#if (CAS_LATENCY == 2)
+#define CAS_NB 0x17
+ /*
+ * 7 == 0111
+ * 1 == 0001
+ */
+#define CAS_MODE 0x2a
+ /*
+ * a == 1010
+ * 2 == 0010
+ */
+#endif
+
+ /* CAS latency 3 */
+#if (CAS_LATENCY == 3)
+#define CAS_NB 0x13
+ /*
+ * 3 == 0011
+ * 1 == 0001
+ */
+#define CAS_MODE 0x3a
+ /*
+ * a == 1010
+ * 3 == 0011
+ */
+#endif
+
+#ifndef CAS_NB
+#error "Nothing defined"
+#endif
+
+/* Default values for config registers */
+
+static void set_nbxcfg(void)
+{
+ /* NBXCFG 0x50 - 0x53 */
+ /* f == 1111
+ * 0 == 0000
+ * 0 == 0000
+ * 0 == 0000
+ * 0 == 0000
+ * 1 == 0001
+ * 8 == 1000
+ * c == 1100
+ * SDRAM Row without ECC:
+ * row 0 == 1 No ECC
+ * row 1 == 1 No ECC
+ * row 2 == 1 No ECC
+ * row 3 == 1 No ECC
+ * row 4 == 1 No ECC
+ * row 5 == 1 No ECC
+ * row 6 == 1 No ECC
+ * row 7 == 1 No ECC
+ * Host Bus Fast Data Ready Enable == 0 Disabled
+ * IDSEL_REDIRECT == 0 (430TX compatibility disable?)
+ * WSC# Hanshake Disable == 0 enable (Use External IOAPIC)
+ * Host/DRAM Frequence == 00 100Mhz
+ * AGP to PCI Access Enable == 0 Disable
+ * PCI Agent to Aperture Access Disable == 0 Enable (Ignored)
+ * Aperture Access Global Enable == 0 Disable
+ * DRAM Data Integrity Mode == 11 (Error Checking/Correction)
+ * ECC Diagnostic Mode Enable == 0 Not Enabled
+ * MDA present == 0 Not Present
+ * USWC Write Post During During I/O Bridge Access Enable == 1 Enabled
+ * In Order Queue Depth (IQD) (RO) == ??
+ */
+ pcibios_write_config_dword(I440GX_BUS, I440GX_DEVFN, 0x50, 0xff00000c);
+}
+
+static void set_dramc(void)
+{
+ /* 0 == 0000
+ * 8 == 1000
+ * Not registered SDRAM
+ * refresh disabled
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, 0x8);
+}
+
+static void set_pam(void)
+{
+ /* PAM - Programmable Attribute Map Registers */
+ /* Ideally we want to enable all of these as DRAM and teach
+ * linux it is o.k. to use them...
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x59, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5a, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5b, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5d, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5e, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5f, 0x00);
+}
+
+static void set_drb(void)
+{
+ /* DRB - DRAM Row Boundary Registers */
+ /* Conservative setting 8MB of ram on first DIMM... */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x60, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x61, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x62, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x63, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x64, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x65, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x66, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x67, 0x01);
+}
+
+static void set_fdhc(void)
+{
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x68, 0x00);
+}
+static void set_mbsc(void)
+{
+ /* MBSC - Memory Buffer Strength Control */
+ /* 00c00003e820
+ * [47:44] 0 == 0000
+ * [43:40] 0 == 0000
+ * [39:36] c == 1100
+ * [35:32] 0 == 0000
+ * [31:28] 0 == 0000
+ * [27:24] 0 == 0000
+ * [23:20] 0 == 0000
+ * [19:16] 3 == 0011
+ * [15:12] e == 1110
+ * [11: 8] 8 == 1000
+ * [ 7: 4] 2 == 0010
+ * [ 3: 0] 0 == 0000
+ * MAA[14:0]#, WEA#, SRASA#, SCASA# Buffer Strengths == 3x
+ * MAB[14,13,10,12:11,9:0]#, WEB#, SRASB#, SCASB# Buffer Strengths == 3x
+ * MD[63:0]# Buffer Strength Control 2 == 3x
+ * MD[63:0]# Buffer Strength Control 1 == 3x
+ * MECC[7:0] Buffer Strength Control 2 == 3x
+ * MECC[7:0] Buffer Strength Control 1 == 3x
+ * CSB7# Buffer Strength == 3x
+ * CSA7# Buffer Strength == 3x
+ * CSB6# Buffer Strength == 3x
+ * CSA6# Buffer Strength == 3x
+ * CSA5#/CSB5# Buffer Strength == 2x
+ * CSA4#/CSB4# Buffer Strength == 2x
+ * CSA3#/CSB3# Buffer Strength == 2x
+ * CSA2#/CSB2# Buffer Strength == 2x
+ * CSA1#/CSB1# Buffer Strength == 2x
+ * CSA0#/CSB0# Buffer Strength == 2x
+ * DQMA5 Buffer Strength == 2x
+ * DQMA1 Buffer Strength == 3x
+ * DQMB5 Buffer Strength == 2x
+ * DQMB1 Buffer Strength == 2x
+ * DQMA[7:6,4:2,0] Buffer Strength == 3x
+ * GCKE Buffer Strength == 1x
+ * FENA Buffer Strength == 3x
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x69, 0xB3);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6a, 0xee);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6b, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6c, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6d, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6e, 0x03);
+}
+
+static void set_smram(void)
+{
+ /* 0x72 SMRAM */
+ /* 1 == 0001
+ * a == 1010
+ * SMM Compatible base segment == 010 (Hardcoded value)
+ */
+}
+
+static void set_esramc(void)
+{
+ /* 0x73 ESMRAMC */
+}
+
+static void set_rps(void)
+{
+ /* RPS - Row Page Size Register */
+ /* 0x0055
+ * [15:12] 0 == 0000
+ * [11: 8] 0 == 0000
+ * [ 7: 4] 5 == 0101
+ * [ 3: 0] 5 == 0101
+ * DRB[0] == 4KB
+ * DRB[1] == 4KB
+ * DRB[2] == 4KB
+ * DRB[3] == 4KB
+ * DRB[4] == 2KB
+ * DRB[5] == 2KB
+ * DRB[6] == 2KB
+ * DRB[7] == 2KB
+ */
+ pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x74, 0x5555);
+}
+
+static void set_sdramc(void)
+{
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, CAS_NB);
+}
+
+static void set_pgpol(void)
+{
+ /* PGPOL - Paging Policy Register */
+ /* 0xff07
+ * [15:12] f == 1111
+ * [11: 8] f == 1111
+ * [ 7: 4] 0 == 0000
+ * [ 3: 0] 7 == 0111
+ * row0 == 4banks
+ * row1 == 4banks
+ * row2 == 4banks
+ * row3 == 4banks
+ * row4 == 4banks
+ * row5 == 4banks
+ * row6 == 4banks
+ * row7 == 4banks
+ * Dram Idle Timer (DIT) == 32 clocks
+ */
+ pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x78, 0xff07);
+}
+
+static void set_mbfs(void)
+{
+ /* MBFS - Memory Buffer Frequencey Select Register */
+ /* 0xffff7f
+ * [23:20] f == 1111
+ * [19:16] f == 1111
+ * [15:12] f == 1111
+ * [11: 8] f == 1111
+ * [ 7: 4] 7 == 0111
+ * [ 3: 0] f == 1111
+ * MAA[14:0], WEA#, SRASA#, SCASA# == 100Mhz Buffers Enabled
+ * MAB[14,13,10,12:11,9:0], WEB#, SRASB#, SCASB# == 100Mhz Buffers Enabled
+ * MD[63:0] Control 2 == 100 Mhz Buffer Enable
+ * MD[63:0] Control 1 == 100 Mhz B
+ * MECC[7:0] Control 2 == 100 Mhz B
+ *
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xca, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcb, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcc, 0x7f);
+}
+
+static void set_dwtc(void)
+{
+ /* DWTC - DRAM Write Thermal Throttle Control */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe0, 0xb4);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe1, 0xbe);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe2, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe3, 0xd7);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe4, 0x97);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe5, 0x3e);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe6, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe7, 0x80);
+}
+
+static void set_drtc(void)
+{
+ /* DRTC - DRAM Read Thermal Throttle Control */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe8, 0x2c);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe9, 0xd3);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xea, 0xf7);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xeb, 0xcf);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xec, 0x9d);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xed, 0x3e);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xee, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xef, 0x00);
+}
+
+static void set_pmcr(void)
+{
+ /* PMCR -- BIOS sets 0x90 into it.
+ * 0x10 is REQUIRED.
+ * we have never used it. So why did this ever work?
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x7a, 0x90);
+
+}
+void sdram_set_registers(void)
+{
+ set_nbxcfg();
+ set_dramc();
+ set_pam();
+ set_drb();
+ set_fdhc();
+ set_mbsc();
+ set_smram();
+ set_esramc();
+ set_rps();
+ set_sdramc();
+ set_pgpol();
+ set_mbfs();
+ set_dwtc();
+ set_drtc();
+ set_pmcr();
+}
+
+int log2(int value)
+{
+ /* __builtin_bsr is a exactly equivalent to the x86 machine
+ * instruction with the exception that it returns -1
+ * when the value presented to it is zero.
+ * Otherwise __builtin_bsr returns the zero based index of
+ * the highest bit set.
+ */
+ return __builtin_bsr(value);
+}
+
+
+static void spd_set_drb(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * DRB registers which holds the ending memory address assigned
+ * to each DIMM.
+ */
+ unsigned end_of_memory;
+ unsigned device;
+ unsigned drb_reg;
+
+ end_of_memory = 0; /* in multiples of 8MiB */
+ device = SMBUS_MEM_DEVICE_START;
+ drb_reg = 0x60;
+ while (device <= SMBUS_MEM_DEVICE_END) {
+ unsigned side1_bits, side2_bits;
+ int byte, byte2;
+
+ side1_bits = side2_bits = -1;
+
+ /* rows */
+ byte = smbus_read_byte(device, 3);
+ if (byte >= 0) {
+ side1_bits += byte & 0xf;
+
+ /* columns */
+ byte = smbus_read_byte(device, 4);
+ side1_bits += byte & 0xf;
+
+ /* banks */
+ byte = smbus_read_byte(device, 17);
+ side1_bits += log2(byte);
+
+ /* Get the moduel data width and convert it to a power of two */
+ /* low byte */
+ byte = smbus_read_byte(device, 6);
+
+ /* high byte */
+ byte2 = smbus_read_byte(device, 7);
+#if HAVE_CAST_SUPPORT
+ side1_bits += log2((((unsigned long)byte2 << 8)| byte));
+#else
+ side1_bits += log2((byte2 << 8) | byte);
+#endif
+
+ /* now I have the ram size in bits as a power of two (less 1) */
+ /* Make it mulitples of 8MB */
+ side1_bits -= 25;
+
+ /* side two */
+
+ /* number of physical banks */
+ byte = smbus_read_byte(device, 5);
+ if (byte > 1) {
+ /* for now only handle the symmetrical case */
+ side2_bits = side1_bits;
+ }
+ }
+
+ /* Compute the end address for the DRB register */
+ /* Only process dimms < 2GB (2^8 * 8MB) */
+ if (side1_bits < 8) {
+ end_of_memory += (1 << side1_bits);
+ }
+#if HAVE_STRING_SUPPORT
+ print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n");
+#endif
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg, end_of_memory);
+
+ if (side2_bits < 8 ) {
+ end_of_memory += (1 << side2_bits);
+ }
+#if HAVE_STRING_SUPPORT
+ print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n");
+#endif
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg +1, end_of_memory);
+
+ drb_reg += 2;
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+}
+
+void sdram_no_memory(void)
+{
+#if HAVE_STRING_SUPPORT
+ print_err("No memory!!\n");
+#endif
+ while(1) ;
+}
+
+static void spd_set_dramc(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * DRAMC register, which records if ram is registerd or not,
+ * and controls the refresh rate.
+ * The refresh rate is not set here, as memory refresh
+ * cannot be enbaled until after memory is initialized.
+ * see spd_enable_refresh.
+ */
+ /* auto detect if ram is registered or not. */
+ /* The DRAMC register also contorls the refresh rate but we can't
+ * set that here because we must leave refresh disabled.
+ * see: spd_enable_refresh
+ */
+ /* Find the first dimm and assume the rest are the same */
+ /* FIXME Check for illegal/unsupported ram configurations and abort */
+ unsigned device;
+ int byte;
+ unsigned dramc;
+ byte = -1;
+ device = SMBUS_MEM_DEVICE_START;
+
+ while ((byte < 0) && (device <= SMBUS_MEM_DEVICE_END)) {
+ byte = smbus_read_byte(device, 21);
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+ if (byte < 0) {
+ /* We couldn't find anything we must have no memory */
+ sdram_no_memory();
+ }
+ dramc = 0x8;
+ if ((byte & 0x12) != 0) {
+ /* this is a registered part.
+ * observation: for register parts, BIOS zeros (!)
+ * registers CA-CC. This has an undocumented meaning.
+ */
+ /* But it does make sense the oppisite of registered
+ * sdram is buffered and 0xca - 0xcc control the buffers.
+ * Clearing them aparently disables them.
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xca, 0);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcb, 0);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcc, 0);
+ dramc = 0x10;
+ }
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, dramc);
+}
+
+static void spd_enable_refresh(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * refresh rate in the DRAMC register.
+ * see spd_set_dramc for the other values.
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+#if HAVE_STATIC_ARRAY_SUPPORT
+ static const unsigned char refresh_rates[] = {
+ 0x01, /* Normal 15.625 us -> 15.6 us */
+ 0x05, /* Reduced(.25X) 3.9 us -> 7.8 us */
+ 0x05, /* Reduced(.5X) 7.8 us -> 7.8 us */
+ 0x02, /* Extended(2x) 31.3 us -> 31.2 us */
+ 0x03, /* Extended(4x) 62.5 us -> 62.4 us */
+ 0x04, /* Extended(8x) 125 us -> 124.8 us */
+ };
+#endif
+ /* Find the first dimm and assume the rest are the same */
+ int status;
+ int byte;
+ unsigned device;
+ unsigned refresh_rate;
+ byte = -1;
+ status = -1;
+ device = SMBUS_MEM_DEVICE_START;
+ while ((byte < 0) && (device <= SMBUS_MEM_DEVICE_END)) {
+ byte = smbus_read_byte(device, 12);
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+ if (byte < 0) {
+ /* We couldn't find anything we must have no memory */
+ sdram_no_memory();
+ }
+ byte &= 0x7f;
+ /* Default refresh rate be conservative */
+ refresh_rate = 5;
+ /* see if the ram refresh is a supported one */
+ if (byte < 6) {
+#if HAVE_STATIC_ARRAY_SUPPORT
+ refresh_rate = refresh_rates[byte];
+#endif
+ }
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57);
+ byte &= 0xf8;
+ byte |= refresh_rate;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, byte);
+}
+
+static void spd_set_sdramc(void)
+{
+ return;
+}
+
+static void spd_set_rps(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the row size
+ * on a given DIMM
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+ /* The RPS register holds the size of a ``page'' of DRAM on each DIMM */
+ unsigned page_sizes;
+ unsigned index;
+ unsigned device;
+ unsigned char dramc;
+ /* default all page sizes to 2KB */
+ page_sizes = 0;
+ index = 0;
+ device = SMBUS_MEM_DEVICE_START;
+ for(; device <= SMBUS_MEM_DEVICE_END; index += 4, device += SMBUS_MEM_DEVICE_INC) {
+ unsigned int status;
+ unsigned int byte;
+ int page_size;
+
+ byte = smbus_read_byte(device, 3);
+ if (byte < 0) continue;
+
+ /* I now have the row page size as a power of 2 */
+ page_size = byte & 0xf;
+ /* make it in multiples of 2Kb */
+ page_size -= 11;
+
+ if (page_size <= 0) continue;
+
+ /* FIXME: do something with page sizes greather than 8KB!! */
+ page_sizes |= (page_size << index);
+
+ /* side two */
+ byte = smbus_read_byte(device, 5);
+ if (byte <= 1) continue;
+
+ /* For now only handle the symmetrical case */
+ page_sizes |= (page_size << (index +2));
+ }
+ /* next block is for Ron's attempt to get registered to work. */
+ /* we have just verified that we have to have this code. It appears that
+ * the registered SDRAMs do indeed set the RPS wrong. sheesh.
+ */
+ /* at this point, page_sizes holds the RPS for all ram.
+ * we have verified that for registered DRAM the values are
+ * 1/2 the size they should be. So we test for registered
+ * and then double the sizes if needed.
+ */
+
+ dramc = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57);
+ if (dramc & 0x10) {
+ /* registered */
+
+ /* BIOS makes weird page size for registered! */
+ /* what we have found is you need to set the EVEN banks to
+ * twice the size. Fortunately there is a very easy way to
+ * do this. First, read the WORD value of register 0x74.
+ */
+ page_sizes += 0x1111;
+ }
+
+ pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x74, page_sizes);
+}
+
+static void spd_set_pgpol(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the number of banks
+ * on a given DIMM
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+ /* The PGPOL register stores the number of logical banks per DIMM,
+ * and number of clocks the DRAM controller waits in the idle
+ * state.
+ */
+ unsigned device;
+ unsigned bank_sizes;
+ unsigned bank;
+ unsigned reg;
+ /* default all bank counts 2 */
+ bank_sizes = 0;
+ bank = 0;
+ device = SMBUS_MEM_DEVICE_START;
+ for(; device <= SMBUS_MEM_DEVICE_END;
+ bank += 2, device += SMBUS_MEM_DEVICE_INC) {
+ int byte;
+
+ /* logical banks */
+ byte = smbus_read_byte(device, 17);
+ if (byte < 0) continue;
+ if (byte < 4) continue;
+ bank_sizes |= (1 << bank);
+
+ /* side 2 */
+ /* Number of physical banks */
+ byte = smbus_read_byte(device, 5);
+ if (byte <= 1) continue;
+ /* for now only handle the symmetrical case */
+ bank_sizes |= (1 << (bank +1));
+ }
+ reg = bank_sizes << 8;
+ reg |= 0x7; /* 32 clocks idle time */
+ pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x78, reg);
+}
+
+static void spd_set_nbxcfg(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * ECC support flags in the NBXCFG register
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+ unsigned reg;
+ unsigned index;
+ unsigned device;
+
+ /* Say all dimms have no ECC support */
+ reg = 0xff;
+ index = 0;
+
+ device = SMBUS_MEM_DEVICE_START;
+ for(; device <= SMBUS_MEM_DEVICE_END; index += 2, device += SMBUS_MEM_DEVICE_INC) {
+ int byte;
+
+ byte = smbus_read_byte(device, 11);
+ if (byte < 0) continue;
+#if !USE_ECC
+ byte = 0; /* Disable ECC */
+#endif
+ /* 0 == None, 1 == Parity, 2 == ECC */
+ if (byte != 2) continue;
+ reg ^= (1 << index);
+
+ /* side two */
+ /* number of physical banks */
+ byte = smbus_read_byte(device, 5);
+ if (byte <= 1) continue;
+ /* There is only the symmetrical case */
+ reg ^= (1 << (index +1));
+ }
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x53, reg);
+ /* Now see if reg is 0xff. If it is we are done. If not,
+ * we need to set 0x18 into regster 0x50.l
+ * we will do this in two steps, first or in 0x80 to 0x50.b,
+ * then or in 0x1 to 0x51.b
+ */
+#if HAVE_STRING_SUPPORT
+ print_debug("spd_set_nbxcfg reg="); print_debug_hex8(reg); print_debug("\n");
+#endif
+ if (reg != 0xff) {
+ unsigned char byte;
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x50);
+ byte |= 0x80;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x50, byte);
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x51);
+ byte |= 1;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x51, byte);
+ /* try this.
+ * We should be setting bit 2 in register 76 and we're not
+ * technically we should see if CL=2 for the ram,
+ * but registered is so screwed up that it's kind of a lost
+ * cause.
+ */
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76);
+ byte |= 4;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, byte);
+#if HAVE_STRING_SUPPORT
+ print_debug("spd_set_nbxcfg 0x76.b="); print_debug_hex8(byte); print_debug("\n");
+#endif
+ }
+}
+
+void sdram_set_spd_registers(void)
+{
+ spd_set_drb();
+ spd_set_dramc();
+ spd_set_rps();
+ spd_set_sdramc();
+ spd_set_pgpol();
+ spd_set_nbxcfg();
+}
+
+void sdram_first_normal_reference(void)
+{
+ return;
+}
+
+void sdram_special_finishup(void)
+{
+ return;
+}
+
+static void set_ram_command(unsigned command)
+{
+ unsigned char byte;
+ command &= 0x7;
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76);
+ byte &= 0x1f;
+ byte |= (command << 5);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, byte);
+#if HAVE_STRING_SUPPORT
+ print_debug("set_ram_command 0x76.b="); print_debug_hex8(byte); print_debug("\n");
+#endif
+}
+
+#define RAM_COMMAND_NONE 0x0
+#define RAM_COMMAND_NOOP 0x1
+#define RAM_COMMAND_PRECHARGE 0x2
+#define RAM_COMMAND_MRS 0x3
+#define RAM_COMMAND_CBR 0x4
+
+void sdram_set_command_none(void)
+{
+ set_ram_command(RAM_COMMAND_NONE);
+}
+void sdram_set_command_noop(void)
+{
+ set_ram_command(RAM_COMMAND_NOOP);
+}
+void sdram_set_command_precharge(void)
+{
+ set_ram_command(RAM_COMMAND_PRECHARGE);
+}
+
+static unsigned long dimm_base(int n)
+{
+ unsigned char byte;
+ unsigned long result;
+ if (n == 0) {
+ return 0;
+ }
+
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x60 + (n - 1));
+ result = byte;
+ result <<= 23;
+ return result;
+}
+
+static void dimms_read(unsigned long offset)
+{
+ int i;
+ for(i = 0; i < 8; i++) {
+ unsigned long dummy;
+ unsigned long addr;
+ unsigned long next_base;
+
+ next_base = dimm_base(i +1);
+ addr = dimm_base(i);
+ if (addr == next_base) {
+ continue;
+ }
+ addr += offset;
+#if HAVE_STRING_SUPPORT
+ print_debug("Reading ");
+ print_debug_hex32(addr);
+ print_debug("\n");
+#endif
+#if HAVE_POINTER_SUPPORT
+ dummy = RAM(unsigned long, addr);
+#endif
+#if HAVE_STRING_SUPPORT
+ print_debug("Reading ");
+ print_debug_hex32(addr ^ 0xddf8);
+ print_debug("\n");
+#endif
+#if HAVE_POINTER_SUPPORT
+ dummy = RAM(unsigned long, addr ^ 0xdff8);
+#endif
+#if HAVE_STRING_SUPPORT
+ print_debug("Read ");
+ print_debug_hex32(addr);
+ print_debug_hex32(addr ^ 0xddf8);
+ print_debug("\n");
+#endif
+ }
+}
+
+void sdram_set_command_cbr(void)
+{
+ set_ram_command(RAM_COMMAND_CBR);
+}
+
+void sdram_assert_command(void)
+{
+ dimms_read(0x400);
+}
+
+void sdram_set_mode_register(void)
+{
+ unsigned char byte;
+ unsigned cas_mode;
+ set_ram_command(RAM_COMMAND_MRS);
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76);
+ cas_mode = byte & 0x4;
+ cas_mode ^= 4;
+ cas_mode <<= 2;
+ cas_mode |= 0x2a;
+ cas_mode <<= 3;
+ dimms_read(cas_mode);
+}
+
+void sdram_enable_refresh(void)
+{
+ spd_enable_refresh();
+}
+
+
+unsigned long sdram_get_ecc_size_bytes(void)
+{
+ unsigned char byte;
+ unsigned long size;
+ /* FIXME handle the no ram case. */
+ /* Read the RAM SIZE */
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x67);
+ /* Convert it to bytes */
+ size = byte;
+ size <<= 23;
+#if !USE_ECC
+ size = 0;
+#endif
+ return size;
+}
+
+/* Dummy udelay code acting as a place holder... */
+void udelay(int count)
+{
+ int i;
+ i = 5;
+}
+
+void sdram_enable(void)
+{
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 1\n");
+#endif
+
+ /* noop command */
+ sdram_set_command_noop();
+ udelay(200);
+ sdram_assert_command();
+
+ /* Precharge all */
+ sdram_set_command_precharge();
+ sdram_assert_command();
+
+ /* wait until the all banks idle state... */
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 2\n");
+#endif
+
+ /* Now we need 8 AUTO REFRESH / CBR cycles to be performed */
+
+ sdram_set_command_cbr();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 3\n");
+#endif
+
+ /* mode register set */
+ sdram_set_mode_register();
+ /* MAx[14:0] lines,
+ * MAx[2:0 ] 010 == burst mode of 4
+ * MAx[3:3 ] 1 == interleave wrap type
+ * MAx[4:4 ] == CAS# latency bit
+ * MAx[6:5 ] == 01
+ * MAx[12:7] == 0
+ */
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 4\n");
+#endif
+
+ /* normal operation */
+ sdram_set_command_none();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 5\n");
+#endif
+}
+
+/* Setup SDRAM */
+void sdram_initialize(void)
+{
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram1\n");
+#endif
+ /* Set the registers we can set once to reasonable values */
+ sdram_set_registers();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram2\n");
+#endif
+ /* Now setup those things we can auto detect */
+ sdram_set_spd_registers();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram3\n");
+#endif
+ /* Now that everything is setup enable the SDRAM.
+ * Some chipsets do the work for use while on others
+ * we need to it by hand.
+ */
+ sdram_enable();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram4\n");
+#endif
+ sdram_first_normal_reference();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram5\n");
+#endif
+ sdram_enable_refresh();
+ sdram_special_finishup();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram6\n");
+#endif
+}
diff --git a/util/romcc/tests/raminit_test2.c b/util/romcc/tests/raminit_test2.c
new file mode 100644
index 0000000000..8dd9c977e5
--- /dev/null
+++ b/util/romcc/tests/raminit_test2.c
@@ -0,0 +1,1283 @@
+#define HAVE_STRING_SUPPORT 0
+#define HAVE_CAST_SUPPORT 0
+#define HAVE_STATIC_ARRAY_SUPPORT 0
+#define HAVE_POINTER_SUPPORT 0
+
+void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+void outw(unsigned short value, unsigned short port)
+{
+ __builtin_outw(value, port);
+}
+
+void outl(unsigned int value, unsigned short port)
+{
+ __builtin_outl(value, port);
+}
+
+unsigned char inb(unsigned short port)
+{
+ return __builtin_inb(port);
+}
+
+unsigned char inw(unsigned short port)
+{
+ return __builtin_inw(port);
+}
+
+unsigned char inl(unsigned short port)
+{
+ return __builtin_inl(port);
+}
+
+static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where)
+{
+ return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3);
+}
+
+static unsigned char pcibios_read_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inb(0xCFC + (where & 3));
+}
+
+static unsigned short pcibios_read_config_word(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inw(0xCFC + (where & 2));
+}
+
+static unsigned int pcibios_read_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inl(0xCFC);
+}
+
+
+static void pcibios_write_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned char value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outb(value, 0xCFC + (where & 3));
+}
+
+static void pcibios_write_config_word(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned short value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outw(value, 0xCFC + (where & 2));
+}
+
+static void pcibios_write_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned int value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+/* Base Address */
+#ifndef TTYS0_BASE
+#define TTYS0_BASE 0x3f8
+#endif
+
+#ifndef TTYS0_BAUD
+#define TTYS0_BAUD 115200
+#endif
+
+#if ((115200%TTYS0_BAUD) != 0)
+#error Bad ttys0 baud rate
+#endif
+
+#define TTYS0_DIV (115200/TTYS0_BAUD)
+
+/* Line Control Settings */
+#ifndef TTYS0_LCS
+/* Set 8bit, 1 stop bit, no parity */
+#define TTYS0_LCS 0x3
+#endif
+
+#define UART_LCS TTYS0_LCS
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+int uart_can_tx_byte(void)
+{
+ return inb(TTYS0_BASE + UART_LSR) & 0x20;
+}
+
+void uart_wait_to_tx_byte(void)
+{
+ while(!uart_can_tx_byte())
+ ;
+}
+
+void uart_wait_until_sent(void)
+{
+ while(!(inb(TTYS0_BASE + UART_LSR) & 0x40))
+ ;
+}
+
+void uart_tx_byte(unsigned char data)
+{
+ uart_wait_to_tx_byte();
+ outb(data, TTYS0_BASE + UART_TBR);
+ /* Make certain the data clears the fifos */
+ uart_wait_until_sent();
+}
+
+void uart_init(void)
+{
+ /* disable interrupts */
+ outb(0x0, TTYS0_BASE + UART_IER);
+ /* enable fifo's */
+ outb(0x01, TTYS0_BASE + UART_FCR);
+ /* Set Baud Rate Divisor to 12 ==> 115200 Baud */
+ outb(0x80 | UART_LCS, TTYS0_BASE + UART_LCR);
+ outb(TTYS0_DIV & 0xFF, TTYS0_BASE + UART_DLL);
+ outb((TTYS0_DIV >> 8) & 0xFF, TTYS0_BASE + UART_DLM);
+ outb(UART_LCS, TTYS0_BASE + UART_LCR);
+}
+
+void __console_tx_char(unsigned char byte)
+{
+ uart_tx_byte(byte);
+}
+void __console_tx_nibble(unsigned nibble)
+{
+ unsigned char digit;
+ digit = nibble + '0';
+ if (digit > '9') {
+ digit += 39;
+ }
+ __console_tx_char(digit);
+}
+void __console_tx_hex8(unsigned char byte)
+{
+ __console_tx_nibble(byte >> 4);
+ __console_tx_nibble(byte & 0x0f);
+}
+
+void __console_tx_hex32(unsigned char value)
+{
+ __console_tx_nibble((value >> 28) & 0x0f);
+ __console_tx_nibble((value >> 24) & 0x0f);
+ __console_tx_nibble((value >> 20) & 0x0f);
+ __console_tx_nibble((value >> 16) & 0x0f);
+ __console_tx_nibble((value >> 12) & 0x0f);
+ __console_tx_nibble((value >> 8) & 0x0f);
+ __console_tx_nibble((value >> 4) & 0x0f);
+ __console_tx_nibble(value & 0x0f);
+}
+
+#if HAVE_STRING_SUPPORT
+void __console_tx_string(char *str)
+{
+ unsigned char ch;
+ while((ch = *str++) != '\0') {
+ __console_tx_byte(ch);
+ }
+}
+#else
+void __console_tx_string(char *str)
+{
+}
+#endif
+
+
+void print_emerg_char(unsigned char byte) { __console_tx_char(byte); }
+void print_emerg_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_emerg_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_emerg(char *str) { __console_tx_string(str); }
+
+void print_alert_char(unsigned char byte) { __console_tx_char(byte); }
+void print_alert_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_alert_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_alert(char *str) { __console_tx_string(str); }
+
+void print_crit_char(unsigned char byte) { __console_tx_char(byte); }
+void print_crit_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_crit_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_crit(char *str) { __console_tx_string(str); }
+
+void print_err_char(unsigned char byte) { __console_tx_char(byte); }
+void print_err_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_err_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_err(char *str) { __console_tx_string(str); }
+
+void print_warning_char(unsigned char byte) { __console_tx_char(byte); }
+void print_warning_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_warning_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_warning(char *str) { __console_tx_string(str); }
+
+void print_notice_char(unsigned char byte) { __console_tx_char(byte); }
+void print_notice_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_notice_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_notice(char *str) { __console_tx_string(str); }
+
+void print_info_char(unsigned char byte) { __console_tx_char(byte); }
+void print_info_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_info_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_info(char *str) { __console_tx_string(str); }
+
+void print_debug_char(unsigned char byte) { __console_tx_char(byte); }
+void print_debug_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_debug_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_debug(char *str) { __console_tx_string(str); }
+
+void print_spew_char(unsigned char byte) { __console_tx_char(byte); }
+void print_spew_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_spew_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_spew(char *str) { __console_tx_string(str); }
+
+#define PIIX4_DEVFN 0x90
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+
+#define PM_BUS 0
+#define PM_DEVFN (PIIX4_DEVFN+3)
+
+#define SMBUS_IO_BASE 0x1000
+#define SMBHSTSTAT 0
+#define SMBHSTCTL 2
+#define SMBHSTCMD 3
+#define SMBHSTADD 4
+#define SMBHSTDAT0 5
+#define SMBHSTDAT1 6
+#define SMBBLKDAT 7
+
+void smbus_enable(void)
+{
+ /* iobase addr */
+ pcibios_write_config_dword(PM_BUS, PM_DEVFN, 0x90, SMBUS_IO_BASE | 1);
+ /* smbus enable */
+ pcibios_write_config_byte(PM_BUS, PM_DEVFN, 0xd2, (0x4 << 1) | 1);
+ /* iospace enable */
+ pcibios_write_config_word(PM_BUS, PM_DEVFN, 0x4, 1);
+}
+
+void smbus_setup(void)
+{
+ outb(0, SMBUS_IO_BASE + SMBHSTSTAT);
+}
+
+static void smbus_wait_until_ready(void)
+{
+ while((inb(SMBUS_IO_BASE + SMBHSTSTAT) & 1) == 1) {
+ /* nop */
+ }
+}
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }while((byte &1) == 1);
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+}
+
+int smbus_read_byte(unsigned device, unsigned address)
+{
+ unsigned char host_status_register;
+ unsigned char byte;
+ int result;
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* read results of transaction */
+ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+
+ result = byte;
+ if (host_status_register != 0x02) {
+ result = -1;
+ }
+ return result;
+}
+
+#define I440GX_BUS 0
+#define I440GX_DEVFN ((0x00 << 3) + 0)
+
+#define USE_ECC 0
+
+#define CAS_LATENCY 3
+
+ /* CAS latency 2 */
+#if (CAS_LATENCY == 2)
+#define CAS_NB 0x17
+ /*
+ * 7 == 0111
+ * 1 == 0001
+ */
+#define CAS_MODE 0x2a
+ /*
+ * a == 1010
+ * 2 == 0010
+ */
+#endif
+
+ /* CAS latency 3 */
+#if (CAS_LATENCY == 3)
+#define CAS_NB 0x13
+ /*
+ * 3 == 0011
+ * 1 == 0001
+ */
+#define CAS_MODE 0x3a
+ /*
+ * a == 1010
+ * 3 == 0011
+ */
+#endif
+
+#ifndef CAS_NB
+#error "Nothing defined"
+#endif
+
+/* Default values for config registers */
+
+static void set_nbxcfg(void)
+{
+ /* NBXCFG 0x50 - 0x53 */
+ /* f == 1111
+ * 0 == 0000
+ * 0 == 0000
+ * 0 == 0000
+ * 0 == 0000
+ * 1 == 0001
+ * 8 == 1000
+ * c == 1100
+ * SDRAM Row without ECC:
+ * row 0 == 1 No ECC
+ * row 1 == 1 No ECC
+ * row 2 == 1 No ECC
+ * row 3 == 1 No ECC
+ * row 4 == 1 No ECC
+ * row 5 == 1 No ECC
+ * row 6 == 1 No ECC
+ * row 7 == 1 No ECC
+ * Host Bus Fast Data Ready Enable == 0 Disabled
+ * IDSEL_REDIRECT == 0 (430TX compatibility disable?)
+ * WSC# Hanshake Disable == 0 enable (Use External IOAPIC)
+ * Host/DRAM Frequence == 00 100Mhz
+ * AGP to PCI Access Enable == 0 Disable
+ * PCI Agent to Aperture Access Disable == 0 Enable (Ignored)
+ * Aperture Access Global Enable == 0 Disable
+ * DRAM Data Integrity Mode == 11 (Error Checking/Correction)
+ * ECC Diagnostic Mode Enable == 0 Not Enabled
+ * MDA present == 0 Not Present
+ * USWC Write Post During During I/O Bridge Access Enable == 1 Enabled
+ * In Order Queue Depth (IQD) (RO) == ??
+ */
+ pcibios_write_config_dword(I440GX_BUS, I440GX_DEVFN, 0x50, 0xff00000c);
+}
+
+static void set_dramc(void)
+{
+ /* 0 == 0000
+ * 8 == 1000
+ * Not registered SDRAM
+ * refresh disabled
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, 0x8);
+}
+
+static void set_pam(void)
+{
+ /* PAM - Programmable Attribute Map Registers */
+ /* Ideally we want to enable all of these as DRAM and teach
+ * linux it is o.k. to use them...
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x59, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5a, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5b, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5d, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5e, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5f, 0x00);
+}
+
+static void set_drb(void)
+{
+ /* DRB - DRAM Row Boundary Registers */
+ /* Conservative setting 8MB of ram on first DIMM... */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x60, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x61, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x62, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x63, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x64, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x65, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x66, 0x01);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x67, 0x01);
+}
+
+static void set_fdhc(void)
+{
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x68, 0x00);
+}
+static void set_mbsc(void)
+{
+ /* MBSC - Memory Buffer Strength Control */
+ /* 00c00003e820
+ * [47:44] 0 == 0000
+ * [43:40] 0 == 0000
+ * [39:36] c == 1100
+ * [35:32] 0 == 0000
+ * [31:28] 0 == 0000
+ * [27:24] 0 == 0000
+ * [23:20] 0 == 0000
+ * [19:16] 3 == 0011
+ * [15:12] e == 1110
+ * [11: 8] 8 == 1000
+ * [ 7: 4] 2 == 0010
+ * [ 3: 0] 0 == 0000
+ * MAA[14:0]#, WEA#, SRASA#, SCASA# Buffer Strengths == 3x
+ * MAB[14,13,10,12:11,9:0]#, WEB#, SRASB#, SCASB# Buffer Strengths == 3x
+ * MD[63:0]# Buffer Strength Control 2 == 3x
+ * MD[63:0]# Buffer Strength Control 1 == 3x
+ * MECC[7:0] Buffer Strength Control 2 == 3x
+ * MECC[7:0] Buffer Strength Control 1 == 3x
+ * CSB7# Buffer Strength == 3x
+ * CSA7# Buffer Strength == 3x
+ * CSB6# Buffer Strength == 3x
+ * CSA6# Buffer Strength == 3x
+ * CSA5#/CSB5# Buffer Strength == 2x
+ * CSA4#/CSB4# Buffer Strength == 2x
+ * CSA3#/CSB3# Buffer Strength == 2x
+ * CSA2#/CSB2# Buffer Strength == 2x
+ * CSA1#/CSB1# Buffer Strength == 2x
+ * CSA0#/CSB0# Buffer Strength == 2x
+ * DQMA5 Buffer Strength == 2x
+ * DQMA1 Buffer Strength == 3x
+ * DQMB5 Buffer Strength == 2x
+ * DQMB1 Buffer Strength == 2x
+ * DQMA[7:6,4:2,0] Buffer Strength == 3x
+ * GCKE Buffer Strength == 1x
+ * FENA Buffer Strength == 3x
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x69, 0xB3);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6a, 0xee);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6b, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6c, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6d, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6e, 0x03);
+}
+
+static void set_smram(void)
+{
+ /* 0x72 SMRAM */
+ /* 1 == 0001
+ * a == 1010
+ * SMM Compatible base segment == 010 (Hardcoded value)
+ */
+}
+
+static void set_esramc(void)
+{
+ /* 0x73 ESMRAMC */
+}
+
+static void set_rps(void)
+{
+ /* RPS - Row Page Size Register */
+ /* 0x0055
+ * [15:12] 0 == 0000
+ * [11: 8] 0 == 0000
+ * [ 7: 4] 5 == 0101
+ * [ 3: 0] 5 == 0101
+ * DRB[0] == 4KB
+ * DRB[1] == 4KB
+ * DRB[2] == 4KB
+ * DRB[3] == 4KB
+ * DRB[4] == 2KB
+ * DRB[5] == 2KB
+ * DRB[6] == 2KB
+ * DRB[7] == 2KB
+ */
+ pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x74, 0x5555);
+}
+
+static void set_sdramc(void)
+{
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, CAS_NB);
+}
+
+static void set_pgpol(void)
+{
+ /* PGPOL - Paging Policy Register */
+ /* 0xff07
+ * [15:12] f == 1111
+ * [11: 8] f == 1111
+ * [ 7: 4] 0 == 0000
+ * [ 3: 0] 7 == 0111
+ * row0 == 4banks
+ * row1 == 4banks
+ * row2 == 4banks
+ * row3 == 4banks
+ * row4 == 4banks
+ * row5 == 4banks
+ * row6 == 4banks
+ * row7 == 4banks
+ * Dram Idle Timer (DIT) == 32 clocks
+ */
+ pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x78, 0xff07);
+}
+
+static void set_mbfs(void)
+{
+ /* MBFS - Memory Buffer Frequencey Select Register */
+ /* 0xffff7f
+ * [23:20] f == 1111
+ * [19:16] f == 1111
+ * [15:12] f == 1111
+ * [11: 8] f == 1111
+ * [ 7: 4] 7 == 0111
+ * [ 3: 0] f == 1111
+ * MAA[14:0], WEA#, SRASA#, SCASA# == 100Mhz Buffers Enabled
+ * MAB[14,13,10,12:11,9:0], WEB#, SRASB#, SCASB# == 100Mhz Buffers Enabled
+ * MD[63:0] Control 2 == 100 Mhz Buffer Enable
+ * MD[63:0] Control 1 == 100 Mhz B
+ * MECC[7:0] Control 2 == 100 Mhz B
+ *
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xca, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcb, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcc, 0x7f);
+}
+
+static void set_dwtc(void)
+{
+ /* DWTC - DRAM Write Thermal Throttle Control */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe0, 0xb4);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe1, 0xbe);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe2, 0xff);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe3, 0xd7);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe4, 0x97);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe5, 0x3e);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe6, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe7, 0x80);
+}
+
+static void set_drtc(void)
+{
+ /* DRTC - DRAM Read Thermal Throttle Control */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe8, 0x2c);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe9, 0xd3);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xea, 0xf7);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xeb, 0xcf);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xec, 0x9d);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xed, 0x3e);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xee, 0x00);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xef, 0x00);
+}
+
+static void set_pmcr(void)
+{
+ /* PMCR -- BIOS sets 0x90 into it.
+ * 0x10 is REQUIRED.
+ * we have never used it. So why did this ever work?
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x7a, 0x90);
+
+}
+void sdram_set_registers(void)
+{
+ set_nbxcfg();
+ set_dramc();
+ set_pam();
+ set_drb();
+ set_fdhc();
+ set_mbsc();
+ set_smram();
+ set_esramc();
+ set_rps();
+ set_sdramc();
+ set_pgpol();
+ set_mbfs();
+ set_dwtc();
+ set_drtc();
+ set_pmcr();
+}
+
+int log2(int value)
+{
+ /* __builtin_bsr is a exactly equivalent to the x86 machine
+ * instruction with the exception that it returns -1
+ * when the value presented to it is zero.
+ * Otherwise __builtin_bsr returns the zero based index of
+ * the highest bit set.
+ */
+ return __builtin_bsr(value);
+}
+
+
+static void spd_set_drb(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * DRB registers which holds the ending memory address assigned
+ * to each DIMM.
+ */
+ unsigned end_of_memory;
+ unsigned device;
+ unsigned drb_reg;
+
+ end_of_memory = 0; /* in multiples of 8MiB */
+ device = SMBUS_MEM_DEVICE_START;
+ drb_reg = 0x60;
+ while (device <= SMBUS_MEM_DEVICE_END) {
+ unsigned side1_bits, side2_bits;
+ int byte, byte2;
+
+ side1_bits = side2_bits = -1;
+
+ /* rows */
+ byte = smbus_read_byte(device, 3);
+ if (byte >= 0) {
+ side1_bits += byte & 0xf;
+
+ /* columns */
+ byte = smbus_read_byte(device, 4);
+ side1_bits += byte & 0xf;
+
+ /* banks */
+ byte = smbus_read_byte(device, 17);
+ side1_bits += log2(byte);
+
+ /* Get the moduel data width and convert it to a power of two */
+ /* low byte */
+ byte = smbus_read_byte(device, 6);
+
+ /* high byte */
+ byte2 = smbus_read_byte(device, 7);
+#if HAVE_CAST_SUPPORT
+ side1_bits += log2((((unsigned long)byte2 << 8)| byte));
+#else
+ side1_bits += log2((byte2 << 8) | byte);
+#endif
+
+ /* now I have the ram size in bits as a power of two (less 1) */
+ /* Make it mulitples of 8MB */
+ side1_bits -= 25;
+
+ /* side two */
+
+ /* number of physical banks */
+ byte = smbus_read_byte(device, 5);
+ if (byte > 1) {
+ /* for now only handle the symmetrical case */
+ side2_bits = side1_bits;
+ }
+ }
+
+ /* Compute the end address for the DRB register */
+ /* Only process dimms < 2GB (2^8 * 8MB) */
+ if (side1_bits < 8) {
+ end_of_memory += (1 << side1_bits);
+ }
+#if HAVE_STRING_SUPPORT
+ print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n");
+#endif
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg, end_of_memory);
+
+ if (side2_bits < 8 ) {
+ end_of_memory += (1 << side2_bits);
+ }
+#if HAVE_STRING_SUPPORT
+ print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n");
+#endif
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg +1, end_of_memory);
+
+ drb_reg += 2;
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+}
+
+void sdram_no_memory(void)
+{
+#if HAVE_STRING_SUPPORT
+ print_err("No memory!!\n");
+#endif
+ while(1) ;
+}
+
+static void spd_set_dramc(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * DRAMC register, which records if ram is registerd or not,
+ * and controls the refresh rate.
+ * The refresh rate is not set here, as memory refresh
+ * cannot be enbaled until after memory is initialized.
+ * see spd_enable_refresh.
+ */
+ /* auto detect if ram is registered or not. */
+ /* The DRAMC register also contorls the refresh rate but we can't
+ * set that here because we must leave refresh disabled.
+ * see: spd_enable_refresh
+ */
+ /* Find the first dimm and assume the rest are the same */
+ /* FIXME Check for illegal/unsupported ram configurations and abort */
+ unsigned device;
+ int byte;
+ unsigned dramc;
+ byte = -1;
+ device = SMBUS_MEM_DEVICE_START;
+
+ while ((byte < 0) && (device <= SMBUS_MEM_DEVICE_END)) {
+ byte = smbus_read_byte(device, 21);
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+ if (byte < 0) {
+ /* We couldn't find anything we must have no memory */
+ sdram_no_memory();
+ }
+ dramc = 0x8;
+ if ((byte & 0x12) != 0) {
+ /* this is a registered part.
+ * observation: for register parts, BIOS zeros (!)
+ * registers CA-CC. This has an undocumented meaning.
+ */
+ /* But it does make sense the oppisite of registered
+ * sdram is buffered and 0xca - 0xcc control the buffers.
+ * Clearing them aparently disables them.
+ */
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xca, 0);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcb, 0);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcc, 0);
+ dramc = 0x10;
+ }
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, dramc);
+}
+
+static void spd_enable_refresh(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * refresh rate in the DRAMC register.
+ * see spd_set_dramc for the other values.
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+#if HAVE_STATIC_ARRAY_SUPPORT
+ static const unsigned char refresh_rates[] = {
+ 0x01, /* Normal 15.625 us -> 15.6 us */
+ 0x05, /* Reduced(.25X) 3.9 us -> 7.8 us */
+ 0x05, /* Reduced(.5X) 7.8 us -> 7.8 us */
+ 0x02, /* Extended(2x) 31.3 us -> 31.2 us */
+ 0x03, /* Extended(4x) 62.5 us -> 62.4 us */
+ 0x04, /* Extended(8x) 125 us -> 124.8 us */
+ };
+#endif
+ /* Find the first dimm and assume the rest are the same */
+ int status;
+ int byte;
+ unsigned device;
+ unsigned refresh_rate;
+ byte = -1;
+ status = -1;
+ device = SMBUS_MEM_DEVICE_START;
+ while ((byte < 0) && (device <= SMBUS_MEM_DEVICE_END)) {
+ byte = smbus_read_byte(device, 12);
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+ if (byte < 0) {
+ /* We couldn't find anything we must have no memory */
+ sdram_no_memory();
+ }
+ byte &= 0x7f;
+ /* Default refresh rate be conservative */
+ refresh_rate = 5;
+ /* see if the ram refresh is a supported one */
+ if (byte < 6) {
+#if HAVE_STATIC_ARRAY_SUPPORT
+ refresh_rate = refresh_rates[byte];
+#endif
+ }
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57);
+ byte &= 0xf8;
+ byte |= refresh_rate;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, byte);
+}
+
+static void spd_set_sdramc(void)
+{
+ return;
+}
+
+static void spd_set_rps(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the row size
+ * on a given DIMM
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+ /* The RPS register holds the size of a ``page'' of DRAM on each DIMM */
+ unsigned page_sizes;
+ unsigned index;
+ unsigned device;
+ unsigned char dramc;
+ /* default all page sizes to 2KB */
+ page_sizes = 0;
+ index = 0;
+ device = SMBUS_MEM_DEVICE_START;
+ for(; device <= SMBUS_MEM_DEVICE_END; index += 4, device += SMBUS_MEM_DEVICE_INC) {
+ unsigned int status;
+ unsigned int byte;
+ int page_size;
+
+ byte = smbus_read_byte(device, 3);
+ if (byte < 0) continue;
+
+ /* I now have the row page size as a power of 2 */
+ page_size = byte & 0xf;
+ /* make it in multiples of 2Kb */
+ page_size -= 11;
+
+ if (page_size <= 0) continue;
+
+ /* FIXME: do something with page sizes greather than 8KB!! */
+ page_sizes |= (page_size << index);
+
+ /* side two */
+ byte = smbus_read_byte(device, 5);
+ if (byte <= 1) continue;
+
+ /* For now only handle the symmetrical case */
+ page_sizes |= (page_size << (index +2));
+ }
+ /* next block is for Ron's attempt to get registered to work. */
+ /* we have just verified that we have to have this code. It appears that
+ * the registered SDRAMs do indeed set the RPS wrong. sheesh.
+ */
+ /* at this point, page_sizes holds the RPS for all ram.
+ * we have verified that for registered DRAM the values are
+ * 1/2 the size they should be. So we test for registered
+ * and then double the sizes if needed.
+ */
+
+ dramc = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57);
+ if (dramc & 0x10) {
+ /* registered */
+
+ /* BIOS makes weird page size for registered! */
+ /* what we have found is you need to set the EVEN banks to
+ * twice the size. Fortunately there is a very easy way to
+ * do this. First, read the WORD value of register 0x74.
+ */
+ page_sizes += 0x1111;
+ }
+
+ pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x74, page_sizes);
+}
+
+static void spd_set_pgpol(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the number of banks
+ * on a given DIMM
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+ /* The PGPOL register stores the number of logical banks per DIMM,
+ * and number of clocks the DRAM controller waits in the idle
+ * state.
+ */
+ unsigned device;
+ unsigned bank_sizes;
+ unsigned bank;
+ unsigned reg;
+ /* default all bank counts 2 */
+ bank_sizes = 0;
+ bank = 0;
+ device = SMBUS_MEM_DEVICE_START;
+ for(; device <= SMBUS_MEM_DEVICE_END;
+ bank += 2, device += SMBUS_MEM_DEVICE_INC) {
+ int byte;
+
+ /* logical banks */
+ byte = smbus_read_byte(device, 17);
+ if (byte < 0) continue;
+ if (byte < 4) continue;
+ bank_sizes |= (1 << bank);
+
+ /* side 2 */
+ /* Number of physical banks */
+ byte = smbus_read_byte(device, 5);
+ if (byte <= 1) continue;
+ /* for now only handle the symmetrical case */
+ bank_sizes |= (1 << (bank +1));
+ }
+ reg = bank_sizes << 8;
+ reg |= 0x7; /* 32 clocks idle time */
+ pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x78, reg);
+}
+
+static void spd_set_nbxcfg(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * ECC support flags in the NBXCFG register
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+ unsigned reg;
+ unsigned index;
+ unsigned device;
+
+ /* Say all dimms have no ECC support */
+ reg = 0xff;
+ index = 0;
+
+ device = SMBUS_MEM_DEVICE_START;
+ for(; device <= SMBUS_MEM_DEVICE_END; index += 2, device += SMBUS_MEM_DEVICE_INC) {
+ int byte;
+
+ byte = smbus_read_byte(device, 11);
+ if (byte < 0) continue;
+#if !USE_ECC
+ byte = 0; /* Disable ECC */
+#endif
+ /* 0 == None, 1 == Parity, 2 == ECC */
+ if (byte != 2) continue;
+ reg ^= (1 << index);
+
+ /* side two */
+ /* number of physical banks */
+ byte = smbus_read_byte(device, 5);
+ if (byte <= 1) continue;
+ /* There is only the symmetrical case */
+ reg ^= (1 << (index +1));
+ }
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x53, reg);
+ /* Now see if reg is 0xff. If it is we are done. If not,
+ * we need to set 0x18 into regster 0x50.l
+ * we will do this in two steps, first or in 0x80 to 0x50.b,
+ * then or in 0x1 to 0x51.b
+ */
+#if HAVE_STRING_SUPPORT
+ print_debug("spd_set_nbxcfg reg="); print_debug_hex8(reg); print_debug("\n");
+#endif
+ if (reg != 0xff) {
+ unsigned char byte;
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x50);
+ byte |= 0x80;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x50, byte);
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x51);
+ byte |= 1;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x51, byte);
+ /* try this.
+ * We should be setting bit 2 in register 76 and we're not
+ * technically we should see if CL=2 for the ram,
+ * but registered is so screwed up that it's kind of a lost
+ * cause.
+ */
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76);
+ byte |= 4;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, byte);
+#if HAVE_STRING_SUPPORT
+ print_debug("spd_set_nbxcfg 0x76.b="); print_debug_hex8(byte); print_debug("\n");
+#endif
+ }
+}
+
+void sdram_set_spd_registers(void)
+{
+ spd_set_drb();
+ spd_set_dramc();
+ spd_set_rps();
+ spd_set_sdramc();
+ spd_set_pgpol();
+ spd_set_nbxcfg();
+}
+
+void sdram_first_normal_reference(void)
+{
+ return;
+}
+
+void sdram_special_finishup(void)
+{
+ return;
+}
+
+static void set_ram_command(unsigned command)
+{
+ unsigned char byte;
+ command &= 0x7;
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76);
+ byte &= 0x1f;
+ byte |= (command << 5);
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, byte);
+#if HAVE_STRING_SUPPORT
+ print_debug("set_ram_command 0x76.b="); print_debug_hex8(byte); print_debug("\n");
+#endif
+}
+
+#define RAM_COMMAND_NONE 0x0
+#define RAM_COMMAND_NOOP 0x1
+#define RAM_COMMAND_PRECHARGE 0x2
+#define RAM_COMMAND_MRS 0x3
+#define RAM_COMMAND_CBR 0x4
+
+void sdram_set_command_none(void)
+{
+ set_ram_command(RAM_COMMAND_NONE);
+}
+void sdram_set_command_noop(void)
+{
+ set_ram_command(RAM_COMMAND_NOOP);
+}
+void sdram_set_command_precharge(void)
+{
+ set_ram_command(RAM_COMMAND_PRECHARGE);
+}
+
+static unsigned long dimm_base(int n)
+{
+ unsigned char byte;
+ unsigned long result;
+ if (n == 0) {
+ return 0;
+ }
+
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x60 + (n - 1));
+ result = byte;
+ result <<= 23;
+ return result;
+}
+
+static void dimms_read(unsigned long offset)
+{
+ int i;
+ for(i = 0; i < 8; i++) {
+ unsigned long dummy;
+ unsigned long addr;
+ unsigned long next_base;
+
+ next_base = dimm_base(i +1);
+ addr = dimm_base(i);
+ if (addr == next_base) {
+ continue;
+ }
+ addr += offset;
+#if HAVE_STRING_SUPPORT
+ print_debug("Reading ");
+ print_debug_hex32(addr);
+ print_debug("\n");
+#endif
+#if HAVE_POINTER_SUPPORT
+ dummy = RAM(unsigned long, addr);
+#endif
+#if HAVE_STRING_SUPPORT
+ print_debug("Reading ");
+ print_debug_hex32(addr ^ 0xddf8);
+ print_debug("\n");
+#endif
+#if HAVE_POINTER_SUPPORT
+ dummy = RAM(unsigned long, addr ^ 0xdff8);
+#endif
+#if HAVE_STRING_SUPPORT
+ print_debug("Read ");
+ print_debug_hex32(addr);
+ print_debug_hex32(addr ^ 0xddf8);
+ print_debug("\n");
+#endif
+ }
+}
+
+void sdram_set_command_cbr(void)
+{
+ set_ram_command(RAM_COMMAND_CBR);
+}
+
+void sdram_assert_command(void)
+{
+ dimms_read(0x400);
+}
+
+void sdram_set_mode_register(void)
+{
+ unsigned char byte;
+ unsigned cas_mode;
+ set_ram_command(RAM_COMMAND_MRS);
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76);
+ cas_mode = byte & 0x4;
+ cas_mode ^= 4;
+ cas_mode <<= 2;
+ cas_mode |= 0x2a;
+ cas_mode <<= 3;
+ dimms_read(cas_mode);
+}
+
+void sdram_enable_refresh(void)
+{
+ spd_enable_refresh();
+}
+
+
+unsigned long sdram_get_ecc_size_bytes(void)
+{
+ unsigned char byte;
+ unsigned long size;
+ /* FIXME handle the no ram case. */
+ /* Read the RAM SIZE */
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x67);
+ /* Convert it to bytes */
+ size = byte;
+ size <<= 23;
+#if !USE_ECC
+ size = 0;
+#endif
+ return size;
+}
+
+/* Dummy udelay code acting as a place holder... */
+void udelay(int count)
+{
+ int i;
+ i = 5;
+}
+
+void sdram_enable(void)
+{
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 1\n");
+#endif
+
+ /* noop command */
+ sdram_set_command_noop();
+ udelay(200);
+ sdram_assert_command();
+
+ /* Precharge all */
+ sdram_set_command_precharge();
+ sdram_assert_command();
+
+ /* wait until the all banks idle state... */
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 2\n");
+#endif
+
+ /* Now we need 8 AUTO REFRESH / CBR cycles to be performed */
+
+ sdram_set_command_cbr();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+ sdram_assert_command();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 3\n");
+#endif
+
+ /* mode register set */
+ sdram_set_mode_register();
+ /* MAx[14:0] lines,
+ * MAx[2:0 ] 010 == burst mode of 4
+ * MAx[3:3 ] 1 == interleave wrap type
+ * MAx[4:4 ] == CAS# latency bit
+ * MAx[6:5 ] == 01
+ * MAx[12:7] == 0
+ */
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 4\n");
+#endif
+
+ /* normal operation */
+ sdram_set_command_none();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram Enable 5\n");
+#endif
+}
+
+/* Setup SDRAM */
+void sdram_initialize(void)
+{
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram1\n");
+#endif
+ /* Set the registers we can set once to reasonable values */
+ sdram_set_registers();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram2\n");
+#endif
+ /* Now setup those things we can auto detect */
+ sdram_set_spd_registers();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram3\n");
+#endif
+ /* Now that everything is setup enable the SDRAM.
+ * Some chipsets do the work for use while on others
+ * we need to it by hand.
+ */
+ sdram_enable();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram4\n");
+#endif
+ sdram_first_normal_reference();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram5\n");
+#endif
+ sdram_enable_refresh();
+ sdram_special_finishup();
+
+#if HAVE_STRING_SUPPORT
+ print_debug("Ram6\n");
+#endif
+}
diff --git a/util/romcc/tests/simple_test.c b/util/romcc/tests/simple_test.c
new file mode 100644
index 0000000000..feacbfdc38
--- /dev/null
+++ b/util/romcc/tests/simple_test.c
@@ -0,0 +1,252 @@
+void land_test(void)
+{
+ int i;
+ i = 1 && 2;
+}
+void lor_test(void)
+{
+ int i;
+ i = 1 || 2;
+}
+
+void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+unsigned char inb(unsigned short port)
+{
+ return __builtin_inb(port);
+}
+
+static unsigned int config_cmd2(unsigned char bus, unsigned devfn, unsigned where)
+{
+ return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3) ;
+}
+
+/* Base Address */
+#ifndef TTYS0_BASE
+#define TTYS0_BASE 0x3f8
+#endif
+
+#ifndef TTYS0_BAUD
+#define TTYS0_BAUD 115200
+#endif
+
+#if ((115200%TTYS0_BAUD) != 0)
+#error Bad ttys0 baud rate
+#endif
+
+#define TTYS0_DIV (115200/TTYS0_BAUD)
+
+/* Line Control Settings */
+#ifndef TTYS0_LCS
+/* Set 8bit, 1 stop bit, no parity */
+#define TTYS0_LCS 0x3
+#endif
+
+#define UART_LCS TTYS0_LCS
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+int uart_can_tx_byte(void)
+{
+ return inb(TTYS0_BASE + UART_LSR) & 0x20;
+}
+
+void uart_wait_to_tx_byte(void)
+{
+ while(!uart_can_tx_byte())
+ ;
+}
+
+void uart_wait_until_sent(void)
+{
+ while(!(inb(TTYS0_BASE + UART_LSR) & 0x40))
+ ;
+}
+
+void uart_tx_byte(unsigned char data)
+{
+ uart_wait_to_tx_byte();
+ outb(data, TTYS0_BASE + UART_TBR);
+ /* Make certain the data clears the fifos */
+ uart_wait_until_sent();
+}
+
+void dummy(void)
+{
+ uart_tx_byte(5);
+}
+
+#define PIIX4_DEVFN 0x90
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+
+#define PM_BUS 0
+#define PM_DEVFN (PIIX4_DEVFN+3)
+
+#define SMBUS_IO_BASE 0x1000
+#define SMBHSTSTAT 0
+#define SMBHSTCTL 2
+#define SMBHSTCMD 3
+#define SMBHSTADD 4
+#define SMBHSTDAT0 5
+#define SMBHSTDAT1 6
+#define SMBBLKDAT 7
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }while((byte &1) == 1);
+#if 1
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+#endif
+}
+
+#if 0
+void ifthenelse(void)
+{
+ int i;
+ if (5 > 2) {
+ i = 1;
+ }
+ else {
+ i = 2;
+ }
+ i = i + 3;
+}
+#endif
+#if 0
+static int add(int left, int right)
+{
+ {
+ return left + right;
+ }
+}
+#else
+#if 0
+static int add(int left, int right)
+{
+ return left + right;
+}
+#endif
+#endif
+
+#if 0
+static void assign(void)
+{
+ int i, j;
+ i = j = 1;
+}
+#endif
+
+#if 0
+static void and(void)
+{
+ int i, j, k;
+ i = 1;
+ j = 2;
+ k = i && j;
+
+}
+static void and_test(void)
+{
+ and();
+}
+#endif
+#if 0
+#define INC_TEST 2
+static void inc(void)
+{
+ int i;
+ i = 5;
+#if (INC_TEST == 1)
+ i += 7;
+#endif
+#if (INC_TEST == 2)
+ ++i;
+#endif
+#if (INC_TEST == 3)
+ i++;
+#endif
+}
+
+#if 0
+static void inc_test(void)
+{
+ inc();
+}
+#endif
+#endif
+#if 0
+static void loop(void)
+{
+ int i;
+ for(i = 0; i < 10; i++) {
+ ;
+ } while(i < 10);
+}
+
+static void loop_test(void)
+{
+ loop();
+}
+#endif
+
+#if 0
+static void simple(void)
+{
+ add(1,2);
+}
+#endif
+
+#if 0
+static void fun(void)
+{
+ int bar;
+ bar = add(1, 2);
+}
+#endif
+
+
+#if 0
+static void func(void)
+{
+ int bar, baz;
+ int i;
+
+ baz = add(1, 2);
+ baz = add(1, 2);
+ bar = 1;
+ baz = 2;
+ for(i = 0; i < 10; i = i + 1) {
+ baz = i;
+ }
+ bar = 1 + 2 * 3;
+ bar = add(3, 4);
+ bar = add(bar, baz);
+}
+#endif
diff --git a/util/romcc/tests/simple_test10.c b/util/romcc/tests/simple_test10.c
new file mode 100644
index 0000000000..3e7f510d67
--- /dev/null
+++ b/util/romcc/tests/simple_test10.c
@@ -0,0 +1,31 @@
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+static void spd_set_drb(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * DRB registers which holds the ending memory address assigned
+ * to each DIMM.
+ */
+ unsigned end_of_memory;
+ unsigned char device;
+
+ end_of_memory = 0; /* in multiples of 8MiB */
+ device = SMBUS_MEM_DEVICE_START;
+ while (device <= SMBUS_MEM_DEVICE_END) {
+ unsigned side1_bits, side2_bits;
+ int byte, byte2;
+
+ side1_bits = side2_bits = -1;
+
+ /* Compute the end address for the DRB register */
+ /* Only process dimms < 2GB (2^8 * 8MB) */
+ if (side1_bits < 8) {
+ end_of_memory += (1 << side1_bits);
+ }
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+}
+
diff --git a/util/romcc/tests/simple_test11.c b/util/romcc/tests/simple_test11.c
new file mode 100644
index 0000000000..7e6b0fbef8
--- /dev/null
+++ b/util/romcc/tests/simple_test11.c
@@ -0,0 +1,13 @@
+static void spd_set_drb(void)
+{
+ unsigned char ch;
+ char *str;
+ str = "test_string";
+ ch = *str;
+ __builtin_outb(ch, 0xab);
+}
+
+void sdram_set_spd_registers(void)
+{
+ spd_set_drb();
+}
diff --git a/util/romcc/tests/simple_test12.c b/util/romcc/tests/simple_test12.c
new file mode 100644
index 0000000000..52c965fc96
--- /dev/null
+++ b/util/romcc/tests/simple_test12.c
@@ -0,0 +1,9 @@
+static void spd_set_drb(void)
+{
+ unsigned char ch;
+ char *str;
+ str = "test_string";
+ ch = *str;
+ __builtin_outb(ch, 0xab);
+}
+
diff --git a/util/romcc/tests/simple_test13.c b/util/romcc/tests/simple_test13.c
new file mode 100644
index 0000000000..563ba54bc4
--- /dev/null
+++ b/util/romcc/tests/simple_test13.c
@@ -0,0 +1,23 @@
+static void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+static void uart_init(void)
+{
+
+ int a;
+ if (1 == 1) {
+ a = 1;
+ outb(a, 0x3f8);
+ } else {
+ a = 2;
+ outb(a, 0x3f8);
+ }
+ outb(a, 0x3f8);
+}
+
+static void main(void)
+{
+ uart_init();
+}
diff --git a/util/romcc/tests/simple_test14.c b/util/romcc/tests/simple_test14.c
new file mode 100644
index 0000000000..cc2f67c8a4
--- /dev/null
+++ b/util/romcc/tests/simple_test14.c
@@ -0,0 +1,288 @@
+static void ram_set_registers(void)
+{
+ static const unsigned int register_values[] = {
+ 0x000c, 0x00000000,
+ 0x0010, 0x90000008,
+ 0x0014, 0x00000000,
+ 0x002c, 0x74541022,
+ 0x0030, 0x00000000,
+ 0x0034, 0x000000a0,
+ 0x0038, 0x00000000,
+ 0x0040, 0x00000001,
+ 0x0044, 0x00000000,
+ 0x0050, 0x0016000b,
+ 0x0058, 0x00000000,
+ 0x0060, 0xd02950e1,
+ 0x0064, 0x00000000,
+ 0x00a0, 0x0030c002,
+ 0x00a4, 0x1f000b77,
+ 0x00a8, 0x00000b21,
+ 0x00ac, 0x00000000,
+ 0x00b0, 0x00000100,
+ 0x00b4, 0x00010900,
+ 0x00b8, 0x00000000,
+ 0x00c0, 0x00600008,
+ 0x00c4, 0x11110020,
+ 0x00c8, 0x00000020,
+ 0x00cc, 0x00350522,
+ 0x00d0, 0x00350002,
+ 0x00d4, 0x00000000,
+ 0x00e0, 0x000d0808,
+ 0x00e4, 0x000c0808,
+ 0x00e8, 0x00130f0f,
+ 0x00ec, 0x00000000,
+ 0x00f0, 0x00040008,
+ 0x00f4, 0x00000000,
+
+
+
+
+
+ 0x080c, 0x00012000,
+ 0x0810, 0x00000000,
+ 0x0818, 0x20010100,
+ 0x081c, 0x2220c1c1,
+ 0x0820, 0xe1f0e000,
+ 0x0824, 0xdff0d800,
+ 0x0828, 0x00000000,
+ 0x083c, 0x000c00ff,
+ 0x0840, 0x00000000,
+
+
+
+
+
+ 0x300c, 0x00012000,
+ 0x3010, 0x00000000,
+ 0x3018, 0x20020200,
+ 0x301c, 0x220000f0,
+ 0x3020, 0xe3f0e200,
+ 0x3024, 0x0000fff0,
+ 0x3028, 0x00000000,
+ 0x3034, 0x000000c0,
+ 0x3038, 0x00000000,
+ 0x303c, 0x000600ff,
+ 0x3040, 0x00000000,
+ 0x3060, 0x06040000,
+ 0x3064, 0x00000000,
+ 0x30c0, 0x0086f008,
+ 0x30c4, 0x00000020,
+ 0x30c8, 0x000000d0,
+ 0x30cc, 0x00010022,
+ 0x30d0, 0x00000002,
+ 0x30d4, 0x00000000,
+ 0x30e0, 0x000d0008,
+ 0x30e4, 0x000e0008,
+ 0x30e8, 0x0016000f,
+ 0x30ec, 0x00000000,
+ 0x30f0, 0x80000008,
+ 0x30f4, 0x00000000,
+
+
+
+
+
+ 0x3a0c, 0x00002000,
+ 0x3a10, 0x0000d401,
+ 0x3a14, 0x00000000,
+ 0x3a2c, 0x746a1022,
+ 0x3a30, 0x00000000,
+ 0x3a3c, 0x0000040c,
+ 0x3a40, 0x0c050002,
+ 0x3a44, 0x746a1022,
+ 0x3a48, 0x00000006,
+ 0x3a4c, 0x00000000,
+
+
+
+
+
+ 0x3b0c, 0x00002000,
+ 0x3b10, 0x00000000,
+ 0x3b2c, 0x746b1022,
+ 0x3b30, 0x00000000,
+ 0x3b40, 0x84099100,
+ 0x3b44, 0x00000000,
+ 0x3b48, 0x00500420,
+ 0x3b4c, 0x00000000,
+ 0x3b50, 0x00008101,
+ 0x3b54, 0xc5ba000f,
+ 0x3b58, 0x00005001,
+ 0x3b5c, 0x00000000,
+ 0x3b60, 0x06800000,
+ 0x3b64, 0x00000013,
+ 0x3b68, 0x00000000,
+ 0x3b70, 0xd54b2906,
+ 0x3b74, 0x0000000c,
+ 0x3b78, 0x00000000,
+ 0x3b7c, 0x746b1022,
+ 0x3b80, 0x00000000,
+ 0x3b84, 0x00000001,
+ 0x3b88, 0x00000000,
+ 0x3bf0, 0x0072ff93,
+ 0x3bf4, 0x00000000,
+
+
+
+
+
+ 0x900c, 0x00800000,
+ 0x9010, 0x00000000,
+ 0x9014, 0x00000000,
+ 0x9018, 0x00000000,
+ 0x901C, 0x00000000,
+ 0x9020, 0x00000000,
+ 0x9024, 0x00000000,
+ 0x9028, 0x00000000,
+ 0x902C, 0x00000000,
+ 0x9030, 0x00000000,
+ 0x9034, 0x00000080,
+ 0x9038, 0x00000000,
+ 0x903C, 0x00000000,
+ 0x9040, 0x00010101,
+ 0x9044, 0x00000000,
+ 0x9048, 0x00000000,
+ 0x904C, 0x00000000,
+ 0x9050, 0x00000000,
+ 0x9054, 0x00000000,
+ 0x9058, 0x00000000,
+ 0x905C, 0x00000000,
+ 0x9060, 0x00000000,
+ 0x9064, 0x000000e4,
+ 0x9068, 0x0f008c0f,
+ 0x906c, 0x0000002c,
+ 0x9070, 0x00000000,
+ 0x9074, 0x00000000,
+ 0x9078, 0x00000000,
+ 0x907C, 0x00000000,
+ 0x9080, 0x21010008,
+ 0x9084, 0x11110020,
+ 0x9088, 0x80750522,
+ 0x908c, 0x00000002,
+ 0x9090, 0x02510456,
+ 0x9094, 0x00ff0000,
+ 0x9098, 0x00000007,
+ 0x909c, 0x00000000,
+ 0x90a0, 0x00000000,
+ 0x90a4, 0x00000000,
+ 0x90a8, 0x00000000,
+ 0x90aC, 0x00000000,
+ 0x90b0, 0x00000000,
+ 0x90b4, 0x00000000,
+ 0x90b8, 0x00000000,
+ 0x90bC, 0x00000000,
+ 0x90c0, 0x00000000,
+ 0x90c4, 0x00000000,
+ 0x90c8, 0x00000000,
+ 0x90cC, 0x00000000,
+
+
+
+
+ 0x910c, 0x00800000,
+ 0x9110, 0x00000000,
+ 0x9140, 0x00000003,
+ 0x9144, 0x001f0000,
+ 0x9148, 0x00200000,
+ 0x914c, 0x00000001,
+ 0x9150, 0x00200000,
+ 0x9154, 0x00000002,
+ 0x9158, 0x00200000,
+ 0x915c, 0x00000003,
+ 0x9160, 0x00200000,
+ 0x9164, 0x00000004,
+ 0x9168, 0x00200000,
+ 0x916c, 0x00000005,
+ 0x9170, 0x00200000,
+ 0x9174, 0x00000006,
+ 0x9178, 0x00200000,
+ 0x917c, 0x00000007,
+ 0x9180, 0x00e00003,
+ 0x9184, 0x00e1ff00,
+ 0x9188, 0x00d80003,
+ 0x918c, 0x00dfff00,
+ 0x9190, 0x00e20003,
+ 0x9194, 0x00e3ff00,
+ 0x9198, 0x00000000,
+ 0x91b0, 0x00000a03,
+ 0x91b4, 0x00000b00,
+ 0x91b8, 0x00200003,
+ 0x91bc, 0x00fe0b00,
+ 0x91c0, 0x0000c003,
+ 0x91c4, 0x0000c000,
+ 0x91c8, 0x00001013,
+ 0x91cc, 0x000ff000,
+ 0x91d0, 0x00000000,
+ 0x91e0, 0xff000003,
+ 0x91e4, 0x00000000,
+ 0x9200, 0x11021022,
+ 0x9204, 0x00000000,
+ 0x9208, 0x06000000,
+ 0x920c, 0x00800000,
+ 0x9210, 0x00000000,
+ 0x9240, 0x00000001,
+ 0x9244, 0x00800001,
+ 0x9248, 0x01000001,
+ 0x924c, 0x01800001,
+ 0x9250, 0x00000000,
+ 0x9260, 0x0060fe00,
+ 0x9270, 0x00000000,
+ 0x9280, 0x00000022,
+ 0x9284, 0x00000000,
+ 0x9288, 0x03623125,
+ 0x928c, 0x00000130,
+ 0x9290, 0x080c8000,
+ 0x9294, 0x0e2b0a06,
+ 0x9298, 0x00000000,
+ 0x92b0, 0xd1e8eb05,
+ 0x92b4, 0x000000cc,
+ 0x92b8, 0xdfbfe7ad,
+ 0x92bc, 0xdf4bdfae,
+ 0x92c0, 0x00000003,
+ 0x92c4, 0x00000000,
+ 0x92cc, 0x9f1f0000,
+ 0x92d0, 0xfbf177f5,
+ 0x92d4, 0x3fefda0e,
+ 0x92d8, 0x33bd35dc,
+ 0x92dc, 0x578d89c1,
+ 0x92e0, 0xdae70105,
+ 0x92e4, 0xfa835cfc,
+ 0x92e8, 0x404e87e6,
+ 0x92ec, 0xba35df44,
+ 0x92f0, 0x00000000,
+
+
+
+
+
+ 0x930c, 0x00800000,
+ 0x9310, 0x00000000,
+ 0x9340, 0x00003bff,
+ 0x9344, 0x00000040,
+ 0x9348, 0x00000000,
+ 0x935c, 0xfe3fb540,
+ 0x9360, 0x00000090,
+ 0x9364, 0x00000000,
+ 0x9370, 0x51020111,
+ 0x9374, 0x50008011,
+ 0x9378, 0x08003800,
+ 0x937c, 0x0000221b,
+ 0x9380, 0x21272321,
+ 0x9384, 0x00232123,
+ 0x9388, 0x00000000,
+ 0x9390, 0x00000005,
+ 0x9394, 0x00000068,
+ 0x9398, 0x001fe800,
+ 0x939c, 0x00000000,
+ 0x93b8, 0xe000001d,
+ 0x93bc, 0x000000bb,
+ 0x93c0, 0x00000000,
+ 0x93d4, 0x000d0001,
+ 0x93d8, 0x00000000,
+ 0x93e4, 0x00001520,
+ 0x93e8, 0x00000108,
+ 0x93ec, 0x00000000,
+ };
+ int max;
+ max = sizeof(register_values);
+}
diff --git a/util/romcc/tests/simple_test15.c b/util/romcc/tests/simple_test15.c
new file mode 100644
index 0000000000..d02eaefd35
--- /dev/null
+++ b/util/romcc/tests/simple_test15.c
@@ -0,0 +1,47 @@
+static void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+static unsigned char inb(unsigned short port)
+{
+ return __builtin_inb(port);
+}
+static int uart_can_tx_byte(void)
+{
+ return inb(0x3f8 + 0x05) & 0x20;
+}
+
+static void uart_wait_to_tx_byte(void)
+{
+ while(!uart_can_tx_byte())
+ ;
+}
+
+static void uart_wait_until_sent(void)
+{
+ while(!(inb(0x3f8 + 0x05) & 0x40))
+ ;
+}
+
+static void uart_tx_byte(unsigned char data)
+{
+ uart_wait_to_tx_byte();
+ outb(data, 0x3f8 + 0x00);
+
+ uart_wait_until_sent();
+}
+
+static void print_debug(const char *str)
+{
+ unsigned char ch;
+ while((ch = *str++) != '\0') {
+ uart_tx_byte(ch);
+ }
+}
+
+static void main(void)
+{
+ print_debug("one\r\n");
+ print_debug("two\r\n");
+}
diff --git a/util/romcc/tests/simple_test2.c b/util/romcc/tests/simple_test2.c
new file mode 100644
index 0000000000..aef936a8ff
--- /dev/null
+++ b/util/romcc/tests/simple_test2.c
@@ -0,0 +1,36 @@
+void outl(unsigned int value, unsigned short port)
+{
+ __builtin_outl(value, port);
+}
+
+#define PIIX4_DEVFN 0x90
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+
+static void spd_set_drb(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * DRB registers which holds the ending memory address assigned
+ * to each DIMM.
+ */
+ unsigned end_of_memory;
+ unsigned device;
+
+ end_of_memory = 0; /* in multiples of 8MiB */
+ device = SMBUS_MEM_DEVICE_START;
+ while (device <= SMBUS_MEM_DEVICE_END) {
+ unsigned side1_bits;
+
+ side1_bits = -1;
+
+ /* Compute the end address for the DRB register */
+ /* Only process dimms < 2GB (2^8 * 8MB) */
+ if (side1_bits < 8) {
+ end_of_memory += (1 << side1_bits);
+ }
+ outl(end_of_memory, 0x1234);
+ }
+}
diff --git a/util/romcc/tests/simple_test3.c b/util/romcc/tests/simple_test3.c
new file mode 100644
index 0000000000..008d0ab528
--- /dev/null
+++ b/util/romcc/tests/simple_test3.c
@@ -0,0 +1,38 @@
+static void spd_set_drb(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * DRB registers which holds the ending memory address assigned
+ * to each DIMM.
+ */
+ unsigned end_of_memory;
+ unsigned device;
+
+ end_of_memory = 0; /* in multiples of 8MiB */
+ device = 0x50;
+ while (device <= 0x53) {
+ unsigned side1_bits, side2_bits;
+ int byte, byte2;
+
+ side1_bits = side2_bits = -1;
+
+ /* rows */
+ byte = -1;
+ if (1) {
+ /* now I have the ram size in bits as a power of two (less 1) */
+ /* Make it mulitples of 8MB */
+ side1_bits -= 25;
+ }
+
+ /* Compute the end address for the DRB register */
+ /* Only process dimms < 2GB (2^8 * 8MB) */
+ if (1) {
+ end_of_memory += side1_bits;
+ }
+ __builtin_outl(end_of_memory, 0x1234);
+
+ if (1) {
+ end_of_memory += side2_bits;
+ }
+ }
+}
diff --git a/util/romcc/tests/simple_test4.c b/util/romcc/tests/simple_test4.c
new file mode 100644
index 0000000000..bfc05d9e0d
--- /dev/null
+++ b/util/romcc/tests/simple_test4.c
@@ -0,0 +1,509 @@
+#define HAVE_STRING_SUPPORT 1
+#define HAVE_CAST_SUPPORT 1
+#define HAVE_STATIC_ARRAY_SUPPORT 1
+#define HAVE_POINTER_SUPPORT 1
+#define HAVE_CONSTANT_PROPOGATION 1
+#define CALCULATE_DRB_REG 1
+
+void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+void outw(unsigned short value, unsigned short port)
+{
+ __builtin_outw(value, port);
+}
+
+void outl(unsigned int value, unsigned short port)
+{
+ __builtin_outl(value, port);
+}
+
+unsigned char inb(unsigned short port)
+{
+ return __builtin_inb(port);
+}
+
+unsigned char inw(unsigned short port)
+{
+ return __builtin_inw(port);
+}
+
+unsigned char inl(unsigned short port)
+{
+ return __builtin_inl(port);
+}
+
+static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where)
+{
+ return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3);
+}
+
+static unsigned char pcibios_read_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inb(0xCFC + (where & 3));
+}
+
+static unsigned short pcibios_read_config_word(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inw(0xCFC + (where & 2));
+}
+
+static unsigned int pcibios_read_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inl(0xCFC);
+}
+
+
+static void pcibios_write_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned char value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outb(value, 0xCFC + (where & 3));
+}
+
+static void pcibios_write_config_word(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned short value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outw(value, 0xCFC + (where & 2));
+}
+
+static void pcibios_write_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned int value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+int log2(int value)
+{
+ /* __builtin_bsr is a exactly equivalent to the x86 machine
+ * instruction with the exception that it returns -1
+ * when the value presented to it is zero.
+ * Otherwise __builtin_bsr returns the zero based index of
+ * the highest bit set.
+ */
+ return __builtin_bsr(value);
+}
+
+
+/* Base Address */
+#ifndef TTYS0_BASE
+#define TTYS0_BASE 0x3f8
+#endif
+
+#ifndef TTYS0_BAUD
+#define TTYS0_BAUD 115200
+#endif
+
+#if ((115200%TTYS0_BAUD) != 0)
+#error Bad ttys0 baud rate
+#endif
+
+#define TTYS0_DIV (115200/TTYS0_BAUD)
+
+/* Line Control Settings */
+#ifndef TTYS0_LCS
+/* Set 8bit, 1 stop bit, no parity */
+#define TTYS0_LCS 0x3
+#endif
+
+#define UART_LCS TTYS0_LCS
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+int uart_can_tx_byte(void)
+{
+ return inb(TTYS0_BASE + UART_LSR) & 0x20;
+}
+
+void uart_wait_to_tx_byte(void)
+{
+ while(!uart_can_tx_byte())
+ ;
+}
+
+void uart_wait_until_sent(void)
+{
+ while(!(inb(TTYS0_BASE + UART_LSR) & 0x40))
+ ;
+}
+
+void uart_tx_byte(unsigned char data)
+{
+ uart_wait_to_tx_byte();
+ outb(data, TTYS0_BASE + UART_TBR);
+ /* Make certain the data clears the fifos */
+ uart_wait_until_sent();
+}
+
+void uart_init(void)
+{
+ /* disable interrupts */
+ outb(0x0, TTYS0_BASE + UART_IER);
+ /* enable fifo's */
+ outb(0x01, TTYS0_BASE + UART_FCR);
+ /* Set Baud Rate Divisor to 12 ==> 115200 Baud */
+ outb(0x80 | UART_LCS, TTYS0_BASE + UART_LCR);
+ outb(TTYS0_DIV & 0xFF, TTYS0_BASE + UART_DLL);
+ outb((TTYS0_DIV >> 8) & 0xFF, TTYS0_BASE + UART_DLM);
+ outb(UART_LCS, TTYS0_BASE + UART_LCR);
+}
+
+void __console_tx_char(unsigned char byte)
+{
+ uart_tx_byte(byte);
+}
+void __console_tx_nibble(unsigned nibble)
+{
+ unsigned char digit;
+ digit = nibble + '0';
+ if (digit > '9') {
+ digit += 39;
+ }
+ __console_tx_char(digit);
+}
+void __console_tx_hex8(unsigned char byte)
+{
+ __console_tx_nibble(byte >> 4);
+ __console_tx_nibble(byte & 0x0f);
+}
+
+void __console_tx_hex32(unsigned char value)
+{
+ __console_tx_nibble((value >> 28) & 0x0f);
+ __console_tx_nibble((value >> 24) & 0x0f);
+ __console_tx_nibble((value >> 20) & 0x0f);
+ __console_tx_nibble((value >> 16) & 0x0f);
+ __console_tx_nibble((value >> 12) & 0x0f);
+ __console_tx_nibble((value >> 8) & 0x0f);
+ __console_tx_nibble((value >> 4) & 0x0f);
+ __console_tx_nibble(value & 0x0f);
+}
+
+#if HAVE_STRING_SUPPORT
+void __console_tx_string(char *str)
+{
+ unsigned char ch;
+ while((ch = *str++) != '\0') {
+ __console_tx_char(ch);
+ }
+}
+#else
+void __console_tx_string(char *str)
+{
+}
+#endif
+
+
+void print_emerg_char(unsigned char byte) { __console_tx_char(byte); }
+void print_emerg_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_emerg_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_emerg(char *str) { __console_tx_string(str); }
+
+void print_alert_char(unsigned char byte) { __console_tx_char(byte); }
+void print_alert_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_alert_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_alert(char *str) { __console_tx_string(str); }
+
+void print_crit_char(unsigned char byte) { __console_tx_char(byte); }
+void print_crit_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_crit_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_crit(char *str) { __console_tx_string(str); }
+
+void print_err_char(unsigned char byte) { __console_tx_char(byte); }
+void print_err_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_err_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_err(char *str) { __console_tx_string(str); }
+
+void print_warning_char(unsigned char byte) { __console_tx_char(byte); }
+void print_warning_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_warning_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_warning(char *str) { __console_tx_string(str); }
+
+void print_notice_char(unsigned char byte) { __console_tx_char(byte); }
+void print_notice_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_notice_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_notice(char *str) { __console_tx_string(str); }
+
+void print_info_char(unsigned char byte) { __console_tx_char(byte); }
+void print_info_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_info_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_info(char *str) { __console_tx_string(str); }
+
+void print_debug_char(unsigned char byte) { __console_tx_char(byte); }
+void print_debug_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_debug_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_debug(char *str) { __console_tx_string(str); }
+
+void print_spew_char(unsigned char byte) { __console_tx_char(byte); }
+void print_spew_hex8(unsigned char value) { __console_tx_hex8(value); }
+void print_spew_hex32(unsigned int value) { __console_tx_hex32(value); }
+void print_spew(char *str) { __console_tx_string(str); }
+
+#define PIIX4_DEVFN 0x90
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+
+#define PM_BUS 0
+#define PM_DEVFN (PIIX4_DEVFN+3)
+
+#if HAVE_CONSTANT_PROPOGATION
+#define SMBUS_IO_BASE 0x1000
+#define SMBHSTSTAT 0
+#define SMBHSTCTL 2
+#define SMBHSTCMD 3
+#define SMBHSTADD 4
+#define SMBHSTDAT0 5
+#define SMBHSTDAT1 6
+#define SMBBLKDAT 7
+
+static void smbus_wait_until_ready(void)
+{
+ while((inb(SMBUS_IO_BASE + SMBHSTSTAT) & 1) == 1) {
+ /* nop */
+ }
+}
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }while((byte &1) == 1);
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+}
+
+int smbus_read_byte(unsigned device, unsigned address)
+{
+ unsigned char host_status_register;
+ unsigned char byte;
+ int result;
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* read results of transaction */
+ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+
+ result = byte;
+ if (host_status_register != 0x02) {
+ result = -1;
+ }
+ return result;
+}
+
+#else /* !HAVE_CONSTANT_PROPOGATION */
+
+#define SMBUS_IO_HSTSTAT 0x1000
+#define SMBUS_IO_HSTCTL 0x1002
+#define SMBUS_IO_HSTCMD 0x1003
+#define SMBUS_IO_HSTADD 0x1004
+#define SMBUS_IO_HSTDAT0 0x1005
+#define SMBUS_IO_HSTDAT1 0x1006
+#define SMBUS_IO_HSTBLKDAT 0x1007
+
+
+static void smbus_wait_until_ready(void)
+{
+ while((inb(SMBUS_IO_HSTSTAT) & 1) == 1) {
+ /* nop */
+ }
+}
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_HSTSTAT);
+ }while((byte &1) == 1);
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_HSTSTAT);
+ }
+}
+
+short smbus_read_byte(unsigned char device, unsigned char address)
+{
+ unsigned char host_status_register;
+ short result;
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_HSTCTL) & (~1), SMBUS_IO_HSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_HSTADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_HSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_HSTCTL) & 0xE3) | 8, SMBUS_IO_HSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_HSTSTAT), SMBUS_IO_HSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_HSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_HSTCTL) | 0x40), SMBUS_IO_HSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_HSTSTAT);
+
+ /* read results of transaction */
+ result = inb(SMBUS_IO_HSTDAT0);
+
+ if (host_status_register != 0x02) {
+ result = -1;
+ }
+ return result;
+}
+#endif /* HAVE_CONSTANT_PROPOGATION */
+
+#define I440GX_BUS 0
+#define I440GX_DEVFN ((0x00 << 3) + 0)
+
+
+static void spd_set_drb(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * DRB registers which holds the ending memory address assigned
+ * to each DIMM.
+ */
+ unsigned end_of_memory;
+ unsigned char device;
+ unsigned char drb_reg;
+
+ end_of_memory = 0; /* in multiples of 8MiB */
+ device = SMBUS_MEM_DEVICE_START;
+#if !CALCULATE_DRB_REG
+ drb_reg = 0x60;
+#endif
+ while (device <= SMBUS_MEM_DEVICE_END) {
+ unsigned side1_bits, side2_bits;
+ int byte, byte2;
+
+ side1_bits = side2_bits = -1;
+
+ /* rows */
+ byte = smbus_read_byte(device, 3);
+ if (byte >= 0) {
+ side1_bits += byte & 0xf;
+
+ /* columns */
+ byte = smbus_read_byte(device, 4);
+ side1_bits += byte & 0xf;
+
+ /* banks */
+ byte = smbus_read_byte(device, 17);
+ side1_bits += log2(byte);
+
+ /* Get the module data width and convert it to a power of two */
+ /* low byte */
+ byte = smbus_read_byte(device, 6);
+
+ /* high byte */
+ byte2 = smbus_read_byte(device, 7);
+#if HAVE_CAST_SUPPORT
+ side1_bits += log2((((unsigned long)byte2 << 8)| byte));
+#else
+ side1_bits += log2((((byte2 << 8) | byte));
+#endif
+
+ /* now I have the ram size in bits as a power of two (less 1) */
+ /* Make it mulitples of 8MB */
+ side1_bits -= 25;
+
+ /* side two */
+
+ /* number of physical banks */
+ byte = smbus_read_byte(device, 5);
+ if (byte > 1) {
+ /* for now only handle the symmetrical case */
+ side2_bits = side1_bits;
+ }
+ }
+
+ /* Compute the end address for the DRB register */
+ /* Only process dimms < 2GB (2^8 * 8MB) */
+ if (side1_bits < 8) {
+ end_of_memory += (1 << side1_bits);
+ }
+#if CALCULATE_DRB_REG
+ drb_reg = ((device - SMBUS_MEM_DEVICE_START) << 1) + 0x60;
+#endif
+
+#if HAVE_STRING_SUPPORT
+ print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n");
+#endif
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg, end_of_memory);
+
+ if (side2_bits < 8 ) {
+ end_of_memory += (1 << side2_bits);
+ }
+#if HAVE_STRING_SUPPORT
+ print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n");
+#endif
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg +1, end_of_memory);
+
+#if !CALCULATE_DRB_REG
+ drb_reg += 2;
+#endif
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+}
diff --git a/util/romcc/tests/simple_test5.c b/util/romcc/tests/simple_test5.c
new file mode 100644
index 0000000000..efc1e9489a
--- /dev/null
+++ b/util/romcc/tests/simple_test5.c
@@ -0,0 +1,310 @@
+#define HAVE_STRING_SUPPORT 0
+#define HAVE_CAST_SUPPORT 0
+#define HAVE_STATIC_ARRAY_SUPPORT 0
+#define HAVE_POINTER_SUPPORT 0
+#define HAVE_CONSTANT_PROPOGATION 0
+
+void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+void outw(unsigned short value, unsigned short port)
+{
+ __builtin_outw(value, port);
+}
+
+void outl(unsigned int value, unsigned short port)
+{
+ __builtin_outl(value, port);
+}
+
+unsigned char inb(unsigned short port)
+{
+ return __builtin_inb(port);
+}
+
+unsigned char inw(unsigned short port)
+{
+ return __builtin_inw(port);
+}
+
+unsigned char inl(unsigned short port)
+{
+ return __builtin_inl(port);
+}
+
+static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where)
+{
+ return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3);
+}
+
+static unsigned char pcibios_read_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inb(0xCFC + (where & 3));
+}
+
+static unsigned short pcibios_read_config_word(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inw(0xCFC + (where & 2));
+}
+
+static unsigned int pcibios_read_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inl(0xCFC);
+}
+
+
+static void pcibios_write_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned char value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outb(value, 0xCFC + (where & 3));
+}
+
+static void pcibios_write_config_word(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned short value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outw(value, 0xCFC + (where & 2));
+}
+
+static void pcibios_write_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned int value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+int log2(int value)
+{
+ /* __builtin_bsr is a exactly equivalent to the x86 machine
+ * instruction with the exception that it returns -1
+ * when the value presented to it is zero.
+ * Otherwise __builtin_bsr returns the zero based index of
+ * the highest bit set.
+ */
+ return __builtin_bsr(value);
+}
+
+#define PIIX4_DEVFN 0x90
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+
+#define PM_BUS 0
+#define PM_DEVFN (PIIX4_DEVFN+3)
+
+#if HAVE_CONSTANT_PROPOGATION
+#define SMBUS_IO_BASE 0x1000
+#define SMBHSTSTAT 0
+#define SMBHSTCTL 2
+#define SMBHSTCMD 3
+#define SMBHSTADD 4
+#define SMBHSTDAT0 5
+#define SMBHSTDAT1 6
+#define SMBBLKDAT 7
+
+static void smbus_wait_until_ready(void)
+{
+ while((inb(SMBUS_IO_BASE + SMBHSTSTAT) & 1) == 1) {
+ /* nop */
+ }
+}
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }while((byte &1) == 1);
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+}
+
+int smbus_read_byte(unsigned device, unsigned address)
+{
+ unsigned char host_status_register;
+ unsigned char byte;
+ int result;
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* read results of transaction */
+ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+
+ result = byte;
+ if (host_status_register != 0x02) {
+ result = -1;
+ }
+ return result;
+}
+
+#else /* !HAVE_CONSTANT_PROPOGATION */
+
+#define SMBUS_IO_HSTSTAT 0x1000
+#define SMBUS_IO_HSTCTL 0x1002
+#define SMBUS_IO_HSTCMD 0x1003
+#define SMBUS_IO_HSTADD 0x1004
+#define SMBUS_IO_HSTDAT0 0x1005
+#define SMBUS_IO_HSTDAT1 0x1006
+#define SMBUS_IO_HSTBLKDAT 0x1007
+
+
+static void smbus_wait_until_ready(void)
+{
+ while((inb(SMBUS_IO_HSTSTAT) & 1) == 1) {
+ /* nop */
+ }
+}
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_HSTSTAT);
+ }while((byte &1) == 1);
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_HSTSTAT);
+ }
+}
+
+int smbus_read_byte(unsigned device, unsigned address)
+{
+ unsigned char host_status_register;
+ int result;
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_HSTCTL) & (~1), SMBUS_IO_HSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_HSTADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_HSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_HSTCTL) & 0xE3) | 8, SMBUS_IO_HSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_HSTSTAT), SMBUS_IO_HSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_HSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_HSTCTL) | 0x40), SMBUS_IO_HSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_HSTSTAT);
+
+ /* read results of transaction */
+ result = inb(SMBUS_IO_HSTDAT0);
+
+ if (host_status_register != 0x02) {
+ result = -1;
+ }
+ return result;
+}
+#endif /* HAVE_CONSTANT_PROPOGATION */
+
+
+#define I440GX_BUS 0
+#define I440GX_DEVFN ((0x00 << 3) + 0)
+
+void sdram_no_memory(void)
+{
+#if HAVE_STRING_SUPPORT
+ print_err("No memory!!\n");
+#endif
+ while(1) ;
+}
+
+static void spd_enable_refresh(void)
+{
+ /*
+ * Effects: Uses serial presence detect to set the
+ * refresh rate in the DRAMC register.
+ * see spd_set_dramc for the other values.
+ * FIXME: Check for illegal/unsupported ram configurations and abort
+ */
+#if HAVE_STATIC_ARRAY_SUPPORT
+ static const unsigned char refresh_rates[] = {
+ 0x01, /* Normal 15.625 us -> 15.6 us */
+ 0x05, /* Reduced(.25X) 3.9 us -> 7.8 us */
+ 0x05, /* Reduced(.5X) 7.8 us -> 7.8 us */
+ 0x02, /* Extended(2x) 31.3 us -> 31.2 us */
+ 0x03, /* Extended(4x) 62.5 us -> 62.4 us */
+ 0x04, /* Extended(8x) 125 us -> 124.8 us */
+ };
+#endif
+ /* Find the first dimm and assume the rest are the same */
+ int status;
+ int byte;
+ unsigned device;
+ unsigned refresh_rate;
+ byte = -1;
+ status = -1;
+ device = SMBUS_MEM_DEVICE_START;
+ while ((byte < 0) && (device <= SMBUS_MEM_DEVICE_END)) {
+ byte = smbus_read_byte(device, 12);
+ device += SMBUS_MEM_DEVICE_INC;
+ }
+ if (byte < 0) {
+ /* We couldn't find anything we must have no memory */
+ sdram_no_memory();
+ }
+ byte &= 0x7f;
+ /* Default refresh rate be conservative */
+ refresh_rate = 5;
+ /* see if the ram refresh is a supported one */
+ if (byte < 6) {
+#if HAVE_STATIC_ARRAY_SUPPORT
+ refresh_rate = refresh_rates[byte];
+#endif
+ }
+ byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57);
+ byte &= 0xf8;
+ byte |= refresh_rate;
+ pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, byte);
+}
+
+void sdram_enable_refresh(void)
+{
+ spd_enable_refresh();
+}
+
diff --git a/util/romcc/tests/simple_test6.c b/util/romcc/tests/simple_test6.c
new file mode 100644
index 0000000000..3dac72d0fb
--- /dev/null
+++ b/util/romcc/tests/simple_test6.c
@@ -0,0 +1,269 @@
+#define HAVE_CONSTANT_PROPOGATION 1
+
+void outb(unsigned char value, unsigned short port)
+{
+ __builtin_outb(value, port);
+}
+
+void outw(unsigned short value, unsigned short port)
+{
+ __builtin_outw(value, port);
+}
+
+void outl(unsigned int value, unsigned short port)
+{
+ __builtin_outl(value, port);
+}
+
+unsigned char inb(unsigned short port)
+{
+ return __builtin_inb(port);
+}
+
+unsigned char inw(unsigned short port)
+{
+ return __builtin_inw(port);
+}
+
+unsigned char inl(unsigned short port)
+{
+ return __builtin_inl(port);
+}
+
+static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where)
+{
+ return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3);
+}
+
+static unsigned char pcibios_read_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inb(0xCFC + (where & 3));
+}
+
+static unsigned short pcibios_read_config_word(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inw(0xCFC + (where & 2));
+}
+
+static unsigned int pcibios_read_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ return inl(0xCFC);
+}
+
+
+static void pcibios_write_config_byte(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned char value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outb(value, 0xCFC + (where & 3));
+}
+
+static void pcibios_write_config_word(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned short value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outw(value, 0xCFC + (where & 2));
+}
+
+static void pcibios_write_config_dword(
+ unsigned char bus, unsigned devfn, unsigned where, unsigned int value)
+{
+ outl(config_cmd(bus, devfn, where), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+int log2(int value)
+{
+ /* __builtin_bsr is a exactly equivalent to the x86 machine
+ * instruction with the exception that it returns -1
+ * when the value presented to it is zero.
+ * Otherwise __builtin_bsr returns the zero based index of
+ * the highest bit set.
+ */
+ return __builtin_bsr(value);
+}
+
+#define PIIX4_DEVFN 0x90
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+
+#define PM_BUS 0
+#define PM_DEVFN (PIIX4_DEVFN+3)
+
+#if HAVE_CONSTANT_PROPOGATION
+#define SMBUS_IO_BASE 0x1000
+#define SMBHSTSTAT 0
+#define SMBHSTCTL 2
+#define SMBHSTCMD 3
+#define SMBHSTADD 4
+#define SMBHSTDAT0 5
+#define SMBHSTDAT1 6
+#define SMBBLKDAT 7
+
+static void smbus_wait_until_ready(void)
+{
+ while((inb(SMBUS_IO_BASE + SMBHSTSTAT) & 1) == 1) {
+ /* nop */
+ }
+}
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }while((byte &1) == 1);
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+ }
+}
+
+int smbus_read_byte(unsigned device, unsigned address)
+{
+ unsigned char host_status_register;
+ unsigned char byte;
+ int result;
+
+ smbus_wait_until_ready();
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADD);
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+
+ /* start the command */
+ outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+
+ /* read results of transaction */
+ byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+
+ result = byte;
+ if (host_status_register != 0x02) {
+ result = -1;
+ }
+ return result;
+}
+
+#else /* !HAVE_CONSTANT_PROPOGATION */
+
+#define SMBUS_IO_HSTSTAT 0x1000
+#define SMBUS_IO_HSTCTL 0x1002
+#define SMBUS_IO_HSTCMD 0x1003
+#define SMBUS_IO_HSTADD 0x1004
+#define SMBUS_IO_HSTDAT0 0x1005
+#define SMBUS_IO_HSTDAT1 0x1006
+#define SMBUS_IO_HSTBLKDAT 0x1007
+
+
+static void smbus_wait_until_ready(void)
+{
+ while((inb(SMBUS_IO_HSTSTAT) & '\1') == '\1') {
+ /* nop */
+ }
+}
+
+static void smbus_wait_until_done(void)
+{
+ unsigned char byte;
+ do {
+ byte = inb(SMBUS_IO_HSTSTAT);
+ }while((byte &1) == 1);
+ while( (byte & ~1) == 0) {
+ byte = inb(SMBUS_IO_HSTSTAT);
+ }
+}
+
+short smbus_read_byte(unsigned char device, unsigned char address)
+{
+ unsigned char host_status_register;
+ short result;
+
+ smbus_wait_until_ready(); /* 2 */
+
+ /* setup transaction */
+ /* disable interrupts */
+ outb(inb(SMBUS_IO_HSTCTL) & (~1), SMBUS_IO_HSTCTL); /* 3 */
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, SMBUS_IO_HSTADD); /* 1 + 3 */
+ /* set the command/address... */
+ outb(address & 0xFF, SMBUS_IO_HSTCMD); /* 1 + 3 */
+ /* set up for a byte data read */
+ outb((inb(SMBUS_IO_HSTCTL) & 0xE3) | 8, SMBUS_IO_HSTCTL); /* 3 */
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(inb(SMBUS_IO_HSTSTAT), SMBUS_IO_HSTSTAT); /* 3 */
+
+ /* clear the data byte...*/
+ outb(0, SMBUS_IO_HSTDAT0); /* 3 */
+
+ /* start the command */
+ outb((inb(SMBUS_IO_HSTCTL) | 0x40), SMBUS_IO_HSTCTL);
+
+ /* poll for transaction completion */
+ smbus_wait_until_done();
+
+ host_status_register = inb(SMBUS_IO_HSTSTAT);
+
+ /* read results of transaction */
+ result = inb(SMBUS_IO_HSTDAT0);
+
+ if (host_status_register != 0x02) {
+ result = -1;
+ }
+ return result;
+}
+#endif /* HAVE_CONSTANT_PROPOGATION */
+
+
+static void test(void)
+{
+ short byte;
+ unsigned device;
+ unsigned char i, j, k, l, m, n, o;
+ i = 1;
+ j = 2;
+ k = 3;
+ l = 4;
+ m = 5;
+ n = 6;
+ o = 7;
+ device = inb(SMBUS_MEM_DEVICE_START);
+ byte = smbus_read_byte(device, 3);
+ outb(i, 0xab);
+ outb(j, 0xab);
+ outb(k, 0xab);
+ outb(l, 0x1234);
+#if 1
+ outb(m, 0xab);
+#endif
+#if 0
+ outb(n, 0xab);
+#endif
+#if 0
+ outb(o, 0xab);
+#endif
+}
diff --git a/util/romcc/tests/simple_test7.c b/util/romcc/tests/simple_test7.c
new file mode 100644
index 0000000000..571f2cdb71
--- /dev/null
+++ b/util/romcc/tests/simple_test7.c
@@ -0,0 +1,12 @@
+void main(void)
+{
+ int i;
+ i = 0;
+ do {
+ int j;
+ __builtin_outb(i, 0xab);
+ j = i++;
+ __builtin_outb(j, 0xdc);
+ } while(i <= 9);
+
+}
diff --git a/util/romcc/tests/simple_test8.c b/util/romcc/tests/simple_test8.c
new file mode 100644
index 0000000000..0b6b853e19
--- /dev/null
+++ b/util/romcc/tests/simple_test8.c
@@ -0,0 +1,12 @@
+
+
+void main(void)
+{
+ static const char msg[] = "hello world\r\n";
+ char *str;
+ char ch;
+ str = msg;
+ while(1) {
+ ch = *str++;
+ }
+}
diff --git a/util/romcc/tests/simple_test9.c b/util/romcc/tests/simple_test9.c
new file mode 100644
index 0000000000..e8df1b9afb
--- /dev/null
+++ b/util/romcc/tests/simple_test9.c
@@ -0,0 +1,12 @@
+
+
+void main(void)
+{
+ static const char msg[] = "hello world\r\n";
+ char *str;
+ char ch;
+ str = msg;
+ do {
+ ch = *str++;
+ } while(ch);
+}