diff options
Diffstat (limited to 'util')
| -rw-r--r-- | util/superiotool/winbond.c | 66 |
1 files changed, 65 insertions, 1 deletions
diff --git a/util/superiotool/winbond.c b/util/superiotool/winbond.c index 96b082e090..03985f0a74 100644 --- a/util/superiotool/winbond.c +++ b/util/superiotool/winbond.c @@ -233,7 +233,71 @@ static const struct superio_registers reg_table[] = { {0x00,0x48,0x48,0x48,0x48,0x00,0x00,0x48,0x00,0x00, EOT}}, {EOT}}}, - {0xa23, "W83627UHG", {/* TODO: Not yet in sensors-detect */ + {0xa23, "W83627UHG = NCT6627UD", { /* TODO: Not yet in sensors-detect */ + {NOLDN, NULL, /* CR2B (485) is only valid for chip rev.E */ + {0x02,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28, + 0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT}, + {0x00,0xa2,NANA,0xff,0xF0,MISC,0x00,MISC,RSVD,0x00, + 0x00,0x00,0x00,0x02,0x00,0x00,0x00,EOT}}, + {0x0, "Floppy", + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,0xf5, + EOT}, + {0x01,0x03,0xf0,0x06,0x02,0x8e,0x00,0xff,0x00,0x00, + EOT}}, + {0x1, "Parallel port", + {0x30,0x60,0x61,0x70,0x74,0xf0,EOT}, + {0x01,0x03,0x78,0x07,0x04,0x3f,EOT}}, + {0x2, "UART A", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x01,0x03,0xf8,0x04,0x00,EOT}}, + {0x3, "UART B", + {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT}, + {0x01,0x02,0xf8,0x03,0x00,0x00,EOT}}, + {0x5, "Keyboard", + {0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT}, + {0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x83,EOT}}, + {0x6, "UART C", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x01,0x03,0xE0,0x04,0x00,EOT}}, + {0x7, "GPIO 3, GPIO 4", + {0x30,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,EOT}, + {0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00,EOT}}, + {0x8, "WDTO#, PLED, GPIO 5,6 & GPIO Base Address", + {0x30,0x60,0x61, + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7, + 0xF5,0xF6,0xF7,EOT}, + {0x02,0x00,0x00, + 0xFF,0x00,0x00,0x00,0xFF,0x1F,0x00,0x00, + 0x00,0x00,0x00,EOT}}, + {0x9, "GPIO 1, GPIO 2 and SUSLED", + {0x30, + 0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7, + 0xF3,EOT}, + {0x00, + 0xff,0x00,0x00,0x00,0xff,0x00,0x00,0x00, + 0x00,EOT}}, + {0xa, "ACPI", + {0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7, + 0xe8,0xe9,0xf2,0xf3,0xf4,0xf6,0xf7,0xfe,EOT}, + {0x00,0x00,0x01,0x00,0xff,0x08,0x00,0x00,0x1c,0x00, + RSVD,RSVD,0x3e,0x00,0x00,0x00,0x00,0x00,EOT}}, + {0xb, "Hardware monitor", + {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,EOT}, + {0x00,0x00,0x00,0x00,RSVD,RSVD,0x00,EOT}}, + {0xc, "PECI, SST", + {0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8, + 0xf1,0xf2,0xf3,0xfe,0xff,EOT}, + {0x00,0x48,0x48,0x48,0x48,0x00,RSVD,RSVD,0x00, + 0x48,0x50,0x10,0x23,0x5A,EOT}}, + {0xD, "UART D", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x02,0xe0,0x03,0x00,EOT}}, + {0xE, "UART E", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x03,0xe8,0x04,0x00,EOT}}, + {0xF, "UART F", + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x02,0xe8,0x03,0x00,EOT}}, {EOT}}}, {0xa51, "W83667HG", { /* See also: http://lists.lm-sensors.org/pipermail/lm-sensors/2008-July/023683.html */ |