summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-09ifdtool: Add locking/unlocking and dumping of access permissionsStefan Reinauer
ifdtool will now dump access permissions of system comonents to certain IFD sections: Found Master Section FLMSTR1: 0xffff0000 (Host CPU/BIOS) Platform Data Region Write Access: enabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: enabled Platform Data Region Read Access: enabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR2: 0x0c0d0000 (Intel ME) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: enabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: enabled Requester ID: 0x0000 FLMSTR3: 0x08080118 (GbE) Platform Data Region Write Access: disabled GbE Region Write Access: enabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: disabled Flash Descriptor Write Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: enabled Intel ME Region Read Access: disabled Host CPU/BIOS Region Read Access: disabled Flash Descriptor Read Access: disabled Requester ID: 0x0118 Also, ifdtool -u /path/to/image will unlock the host's access to the firmware descriptor and ME region. ifdtool -l /path/to/image will lock down the host's access to the firmware descriptor and ME region. Change-Id: I3e081b80a9bcb398772416f143b794bf307b1c36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1755 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-09mc146818rtc: Remove the hyphen to build on NetBSD and DarwinZheng Bao
http://netbsd.gw.com/cgi-bin/man-cgi?date++NetBSD-current The NetBSD manual tells us the date in NetBSD doesn't take any flags to enable or disable padding in the format. By default, date pads numeric fields with zeroes. This will convert the number to octal one. So add "0x" to convert it to BCD directly. Change-Id: Icd44312acf01b8232f1da1fbaa70630d09007b40 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1804 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09mc146818rtc: Update the Day of Week in CMOS in the right way.Zheng Bao
The range of weekday in CMOS is 01-07, while the Sunday is 1, and Saturday is 7. The comand date in coreutils defines %u day of week (1..7); 1 is Monday %w day of week (0..6); 0 is Sunday There are 1 day offset for each week day. So we use "%w" and plus 1 before we update the weekday in CMOS. Change-Id: I3fab4e95f04924ff0ba10a7012b57da1d3f0d1a5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1802 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09Makefile.inc: Delete trailing space in build.hZheng Bao
Change-Id: I0c5ed84a405dc9e98e8912ccf1a2f83c4c601fc7 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1803 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09Fix abuild output in JenkinsStefan Reinauer
Ignore the harmless broken pipe messages from "yes" Building amd/pistachio; i386: ok, using i386-elf-gcc Using payload /srv/jenkins/payloads/seabios/bios.bin.elf Creating config file... (blobs, ccache) yes: standard output: Broken pipe yes: write error ok; Compiling image on 4 cpus in parallel .. ok. (took 10s) Change-Id: Ic53e246aac3ab6d7ea7a006a8dfac1c3f85797bc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1813 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09Fix Segmentation Fault in ifdtoolStefan Reinauer
If a section is bigger than the FD file it is injected into, and the FD lies about the size of the FD file, ifdtool would crash because reading in the section writes beyound the FD file in memory. Change-Id: Idcfac2b1e2b5907fad34799e44a8abfd89190fcc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1754 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-08mainboard/roda/rk886ex: Disable CHECK_SLFRCS_ON_RESUMENico Huber
This makes resume from S3 work again. The check is new and fails on other boards, too. Change-Id: I0ada569e4ba649b9ac82768b0888e16104c621e8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1809 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08Add utility for parsing/modifying DTD arrayVadim Bendebury
Detailed timing descriptor (DTD) is an 18 byte array describing video mode (screen resolution, display properties, etc.) in Intel Option ROM. Option ROM can support multiple video modes, specific mode is picked by the BIOS through the appropriate Option ROM callback function. The new utility allows to interpret the 18 byte hex DTD dump, and/or modify certain values, and generate a new DTD. To parse the DTD contents just pass the 18 bytes to the utility in the command line. To modify the existing contents and generate a new dump precede the 18 bytes with '-m' and follow prompts. Change-Id: Ib00bdaf42c350b98b5a48d08e6bb347b5ec25a8b Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1711 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08Refactor the endianness conversion functions and header files.Gabe Black
The endianness of an architecture is now set up automatically using Kconfig and some common code. The available conversion functions were also expanded to go to or from a particular endianness. Those use the abbreviation le or be for little or big endian. Built for Stumpy and saw coreinfo cbfs support work which uses network byte order. Used the functions which convert to little endian to implement an AHCI driver. The source arch is also little endian, so they were effectively (and successfully) inert. Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Update libpayloads understanding of the coreboot tables.Gabe Black
Give it somewhere to put the new info in sysinfo, and tell it how to parse the new tables which it doesn't yet understand. Change-Id: I01d3318138696e6407553c27c1814f79e3fbc4f8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Log unexpected post code from the previous bootDuncan Laurie
Read out the post code from the previous boot and log it if the code is not one of the expected values. Test: 1) interrupt the boot of the system, this is easiest with warm reset button when servo is attached 2) check the event log with mosys 65 | 2012-09-09 12:32:11 | Last post code in previous boot | 0x9d Change-Id: Id418f4c0cf005a3e97b8c63de67cb9a09bc57384 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1744 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08Add support for storing POST codes in CMOSDuncan Laurie
This will use 3 bytes of CMOS to keep track of the POST code for the current boot while also leaving a record of the previous boot. The active bank is switched early in the bootblock. Test: 1) clear cmos 2) reboot 3) use "mosys nvram dump" to verify that the first byte contains 0x80 and the second byte contains 0xF8 4) powerd_suspend and then resume 5) use "mosys nvram dump" to verify that the first byte contains 0x81 and the second byte contains 0xFD Change-Id: I1ee6bb2dac053018f3042ab5a0b26c435dbfd151 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08x86 memcpy: Copy 4 bytes at onceStefan Reinauer
This is a slight improvement over the rep movsb loop Change-Id: Id71d9bfe5330b154a5c62fac85ce3955ae89b057 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08RTC: Don't clear pending interrupt in resume pathDuncan Laurie
The linux kernel relies on the RTC reporting pending interrupts if the RTC alarm was used to wake the system. If we clear these flags here then the rtc-cmos driver in the kernel will think that no interrupts are pending and will not re-start the timerqueue to handle the alarm timerqueue node. This flag doesn't exist in SMM but the rtc code is compiled there. Since rtc_init() is not called by SMM it is guarded with an ifdef. I performed several thousand suspend/resume cycles without seeing an issue where hwclock was unable to read from /dev/rtc. There still is a potential kernel issue where the timerqueue can stall but this makes that much less likely to happen on resume. Change-Id: I5a343da4ce5c4c8ec4783b4e503869ccfa5077f0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1741 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08smi: make tseg_relocate check pointer offsetDuncan Laurie
In case tseg_relocate() is called again on a pointer we should not relocate it again. Change-Id: Ida1f9c20dc94b448c773b14d8864afe585369119 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1740 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08elog: add extended management engine eventDuncan Laurie
We are seeing ME disabled and ME error events on some devices and this extended info can help with debug. Also fix a potential issue where if the log does manage to get completely full it will never try to shrink it because the only call to shrink the log happens after a successful event write. Add a check at elog init time to shrink the log size. Change-Id: Ib81dc231f6a004b341900374e6c07962cc292031 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08spi: fix erase in SMM while SPIBAR is lockedDuncan Laurie
The handling of write enable was not entirely correct, the opcode needs to be skipped when the controller is locked down. Addresses were not getting set properly for erase commands which seemed to mostly work when the previous command had set an address. Tested by adding events to the event log at runtime on a freslhy flashed device (with locked down SPI controller) until the log log shrink happens to ensure it does not hang: hexdump -C elog.event.kernel_clean 00000000 01 00 00 00 ad de 00 00 00 00 for x in $(seq 1 232); do cat elog.event.kernel_clean > /sys/firmware/gsmi/append_to_eventlog done mosys eventlog list | tail -6 154 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown 155 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown 156 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown 157 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown 158 | 2012-09-01 13:54:43 | Log area cleared | 1030 159 | 2012-09-01 13:54:43 | Kernel Event | Clean Shutdown Change-Id: I3a50dae54422a9ff37daefce3632f8bcbe4eb89f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1717 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Get more informative output from cbmem.pyVadim Bendebury
This is a cosmetic change which formats timestamp information retrieved by cbmem.py. Instead of printing timestamps in a single line, print them one per line and add time (in us) elapsed since the previous timestamp. time base 4149594, total entries 18 1:56,928 2:58,851 (1,923) 3:175,230 (116,378) 4:175,340 (109) 8:177,199 (1,859) 9:214,368 (37,168) 10:214,450 (81) 30:214,462 (11) 40:215,205 (743) 50:217,180 (1,974) 60:217,312 (132) 70:436,984 (219,671) 75:436,993 (8) 80:441,424 (4,431) 90:442,487 (1,062) 99:553,777 (111,289) 1000:556,513 (2,736) 1100:824,621 (268,107) Change-Id: I0d25cafe766c10377017697e6b206276e1a92992 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1716 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Fix cbmem to work on 64 bit platformsVadim Bendebury
For some reason which I fail to understand, specifying endiannes using '@' (which means 'native' and should be the same as '<' on x86 platforms) causes cbmem.py to crash the machine on 64 bit systems. What happens is that the addresses read from various table headers' struct representations do not make sense, when bogus address gets passed to get_phys_mem, the crash happens while that function is executed. dlaurie@ found out that replacing "@" with "<" in fact fixes the issue. After some investigation I am just submitting this fix without much understanding of the root cause. Change-Id: Iaba9bc72a3f6b1d0407a5f1e3b459ccf5063969d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1715 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Make option rom init more verboseStefan Reinauer
When bringing up VGA by running the option rom it's sometimes useful to get more information about the mode that gets set, or the reason why the mode could not be set or a picture could not be displayed. Also prefix the output from VBE mode setting with VBE: Copying VGA ROM Image from fff0fd78 to 0xc0000, 0x10000 bytes Real mode stub @00000600: 867 bytes Calling Option ROM... int15_handler: INT15 function 5fac! ... Option ROM returned. VBE: Getting information about VESA mode 4161 VBE: resolution: 1280x1024@16 VBE: framebuffer: d0000000 VBE: Setting VESA mode 4161 VGA Option ROM has been loaded Change-Id: I2be11f095dc62ed3c99e0d4272ad9d6521608a44 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08cbfstool: add offset parameter to create commandStefan Reinauer
CBFS allows coreboot rom images that are only partially covered by the filesystem itself. The intention of this feature was to allow EC / ME / IMC firmware to be inserted easily at the beginning of the image. However, this was never implemented in cbfstool. This patch implements an additional parameter for cbfstool. If you call cbfstool like this: cbfstool coreboot.rom create 8192K bootblock.bin 64 0x700000 it will now create an 8M image with CBFS covering the last 1M of that image. Test: cbfstool coreboot.rom create 8192K bootblock.bin 64 0x700000 creates an 8M image that is 7M of 0xff and 1M of CBFS. Change-Id: I5c016b4bf32433f160b43f4df2dd768276f4c70b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1708 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08ELOG: Find flash base in FMAP if possibleDuncan Laurie
Now that we have FMAP support in coreboot use it to find the offset in flash for ELOG to use. If coreboot has elog configured with a smaller size then use that over the FMAP size. This is because I set aside a 16KB region in the FMAP but we only use 4KB of it to keep the impact to boot/resume speed to a minimum. FMAP: Found "FMAP" version 1.0 at ffe10000. FMAP: base = 0 size = 800000 #areas = 32 FMAP: area RW_ELOG found FMAP: offset: 3f0000 FMAP: size: 16384 bytes FMAP: No valid base address, using 0xff800000 ELOG: base=0x003f0000 base_ptr=0xffbf0000 ELOG: MEM @0x00190ad8 FLASH @0xffbf0000 ELOG: areas are 4096 bytes, full threshold 3072, shrink size 1024 Change-Id: I3d826812c0f259d61f41b42797c58dd179f9f1c8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1706 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-07ELOG: Don't disable SPI controller lockdownDuncan Laurie
Now that WREN prefix is handled properly ELOG is able to write when the SPI controller is locked down. To test, ensure that runtime SPI write via ELOG is successful by checking the event log for a kernel shutdown reason code: 5 | 2012-08-27 11:09:48 | Kernel Event | Clean Shutdown 6 | 2012-08-27 11:09:50 | System boot | 26 7 | 2012-08-27 11:09:50 | System Reset Change-Id: If6d0dced7cb0f5ca7038b3d758f31b856826d30b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1712 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07SPI: opmenu special case for WREN as atomic prefixDuncan Laurie
The code that attempts to use the opmenu needs to have a special case for write enable now that it is handled as an atomic prefix and not as a standalone opcode. To test, ensure that runtime SPI write via ELOG is successful by checking the event log for a kernel shutdown reason code: 5 | 2012-08-27 11:09:48 | Kernel Event | Clean Shutdown 6 | 2012-08-27 11:09:50 | System boot | 26 7 | 2012-08-27 11:09:50 | System Reset Change-Id: I527638ef3e2a5ab100192c5be6e6b3b40916295a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1710 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07RTC: Write build date in BCD when clearing RTC CMOSDuncan Laurie
Check the RTC on boot after RTC battery failure and ensure that the reported build date matches what is reported: > grep ^rtc /proc/driver/rtc rtc_time : 01:00:21 rtc_date : 2012-08-16 Change-Id: If23f436796754c68ae6244ef7633ff4fa0a93603 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1709 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Turn the "debug" #define into the usb_debug static inline function.Gabe Black
The "debug" macro used internally in the libpayload USB subsystem was very generically named and would leak into consumers of the library that included usb.h directly or indirectly. This change turns that #define from a macro into a static inline function to move away from the preprocessor, and also renames it to usb_debug so it's less likely to collide with something unrelated. Change-Id: I18717df111aa9671495f8a2a5bdb2c6311fa7acf Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1738 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Take usb_poll out of usb_initialize.Gabe Black
While it might be slightly more convenient to not have to call usb_poll manually after calling usb_initialize, you'll still likely want to call it before trying to use a USB device since one have have been hotplugged since you last looked. By not calling usb_poll, usb_initialize completes quickly and can be called unconditionally without a long delay. The delay can be put off until later when we're sure it's necessary. Change-Id: Ib8b1bdea996702c42d1b7021f492d9f8e174d304 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1737 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Make usb_initialize more efficient and fix style problems.Gabe Black
The usb_initialize function would scan for USB host controllers by brute force iterating over all possible busses, devices, and functions. This change makes it recursively scan busses only if it finds them on the other side of a bridge, and only scan for functions beyond function 0 if the device claims to be multifunction. This change also takes the opportunity to clean up some style problems throughout the file. Change-Id: I0f5e8b9a454a42a76d30bccca898c8e1af770b2b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1736 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Add definitions for more config space registers.Gabe Black
Change-Id: I02cf353ce7c955cb11ca11c0d5b8aa630cf15fdb Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1735 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Add the format attribute to functions in stdio.h.Gabe Black
gcc recognizes the format function attribute which tells the compiler to expect the format string to look a certain way and for its arguments to be of appropriate types. This helps to prevent errors like the one that was recently fixed in libpayload's assert. Change-Id: I284ae8bff32f72cfd2d1a250d126c729b38a5730 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1731 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Fix the format string of the assert macro.Gabe Black
The assert macro in libpayload was using a format string which printed the line number with %s. The line number came from the __LINE__ predefined macro which resolves to an integer constant. Change-Id: I0e00d42a1569802137cf440af3061d7f397fdd27 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1730 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Add faster, architecture specific versions of memset and memcpy.Gabe Black
Change-Id: I0f3a82de860fd3afa10a557b37fb90fe6b06ae90 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1726 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Make the symbols in memory.c weak so they can be overridden.Gabe Black
The implementations for various stdlib functions in libc/memory.c are very generic and should work under just about any circumstances. They are unfortunately also very slow. This change makes them weak symbols so that faster versions can be defined on a per architecture basis which will automatically take the place of the slow versions. Change-Id: Ia1ac90d9dcd45962b2a15f61ecc74b0a4676048d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1725 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Update the way serial info is read from the coreboot tables.Gabe Black
This information is now stored in a structure instead of in a few seperate fields. libpayload hadn't been updated to reflect the new layout or to consume the new information intelligently. Change-Id: Ice3486ffcdcdbe1f16f9c84515120c591d8dc882 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1724 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Move the definition of ipchksum into its own header file.Gabe Black
Change-Id: Ifb7c18f9ca566bd50ca138ffd8af951375089537 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1722 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Discard .note sections when linking.Gabe Black
These end up being loaded at 0 otherwise and overwrite some coreboot tables. Built and booted on Stumpy. Saw that the coreboot tables were no longer overwritten. Change-Id: Ia9f521d976d0ad544a8205323ae0ddfa8d253d29 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1721 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07Include stdint.h in libpayload's rdtsc.h.Gabe Black
This file uses uint*_t types but hadn't included stdint.h itself. Change-Id: Ib883f62951bae1ece5134c6bd0f4799a80740e8e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1720 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07cbfstool: respect dependencies when building locallyStefan Reinauer
cbfstool was not looking at any dependencies when building by running make in util/cbfstool. By fixing this it's not required to make clean every time you edit a file in there. Change-Id: I544fd54d4b9dd3b277996c21ade56dc086b84800 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1707 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07SMI: Change order of SMI_EN and PM1_EN initDuncan Laurie
This appears to fix an infrequent resume hang on Ivybridge. Tested on 2 devices with 15k suspend/resume cycles each Change-Id: I53618bc7966824413f1720a2be3cbd2550e29473 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1704 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07EC: Prepare to read and log last post code from previous bootDuncan Laurie
(elog portion, support in EC code pending) - Use a new EC command to read the last post code from the previous boot - If the post code is not well-known final boot or resume code then log it Change-Id: Id6249e9a182243eb87c777edd56f48de72125e77 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1703 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07SandyBridge/IvyBridge: Use flash map to find MRC cacheStefan Reinauer
Until now, the MRC cache position and size was hard coded in Kconfig. However, on ChromeOS devices, it should be determined by reading the FMAP. This patch provides a minimalistic FMAP parser (libflashmap was too complex and OS centered) to allow reading the in-ROM flash map and look for sections. This will also be needed on some partner devices where coreboot will have to find the VPD in order to set up the device's mac address correctly. The MRC cache implementation demonstrates how to use the FMAP parser. Change-Id: I34964b72587443a6ca4f27407d778af8728565f8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1701 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Strip quotes from $(objcbfs)Stefan Reinauer
Otherwise object paths will look like build/cbfs/"fallback"/... Change-Id: I3e60f90f7490e71b0da075d3ea8fc847abc07938 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1700 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Add missing newline in error messageStefan Reinauer
This is purely cosmetic. All error messages in the Sandybridge raminit code printed a newline at the end. Change-Id: I880d291928291d487039850a2a3d53a1101124ba Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1699 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: add explicit dependency on build.hVincent Palatin
build.h is generated at build time, with highly parallel builds, we might try to compile the rtc driver too early. Change-Id: I9a2681484d58b67ed3061669fbdf52ac5ad14dab Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1698 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: erase CMOS memory after power failureVincent Palatin
When a power failure happens on the RTC rail, the CMOS memory (including the RTC registers) is filled with garbage. So, we erase the full first bank (112 bytes) and we reset the RTC date to the build date. To test, disconnect the CMOS battery to produce an RTC power failure, then boot the machine and observe the RTC date is the build date using "cat /sys/class/rtc/rtc0/date" Change-Id: I684bb3ad5079f96825555d4ed84dc0f7914e9884 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1697 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07AMD G34 CPU: change lapic_id in northbridge.c to accommodate G34 CPUSiyuan Wang
Each G34 socket has two node. Previous lapic algorithm is written for the CPU which has one node per socket. I test the code on h8qgi with 4 family 15 CPUs(8 cores per CPU). The topology is: socket 0 --> Node 0, Node 1 socket 2 --> Node 2, Node 3 socket 1 --> Node 4, Node 5 socket 3 --> Node 6, Node 7 Each node has 4 cores. I change the code according to this topology. Change-Id: I45f242e0dfc61bd9b18afc952d7a0ad6a0fc3855 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1659 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-07CMOS: Move MRC seed offset into upper bankDuncan Laurie
This will allow the lower bank to be cleared without impacting the ability to suspend/resume. Change-Id: Iaec3c9e7e40c334053c814eaddd1f614df245a73 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1696 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: force mc146818 register D to a correct valueVincent Palatin
On Panther Point PCH (and maybe cougar point), when some of the register D reserved bits are set, the RTC starts misbehaving (e.g. incrementing the year byte every second). There are probably undocumented features implemented behind those bits. Let's reset register D to a known state to ensure we get the expected RTC behavior. Change-Id: I7e2c2a2c6130a974bccb3d760b41eaa579a58b67 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1695 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Fix CONFIG_ use in i8254.cStefan Reinauer
We always define CONFIG_ variables, even if they're not set. Hence, remove the check whether CONFIG_UDELAY_TIMER2 is defined Change-Id: Iefdf2389941f2cc63ae4f13ac6b213da4c96b201 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1694 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Add POST code for "All devices initialized"Stefan Reinauer
Right now we only had a post code for "All devices enabled" which was emitted at the wrong time (after the device initialize stage rather than the device enable stage) Change-Id: Iee82bff020de844c7095703f8d6521953003032c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1693 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-26 06:31:51 +0000