summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-01nb/intel/haswell: Add a PCI ID for a Mini-HD audio controllerTristan Corrick
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS. Change-Id: I3679d1ab0ae08726bff04c5985d6d93437b2fb81 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-01nb/intel/haswell: Add a PCI ID for a desktop memory controllerTristan Corrick
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS. Change-Id: Ie162cb7a27e313ffe612659e8444657a3772d3c9 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-01arch/x86: clarify raw CAR_GLOBAL access guardsAaron Durbin
Romstage is where DRAM comes online. Therefore, allow raw CAR_GLOBAL object access in all cache-as-ram stages that are not romstage. In practice, this should be a nop. However, the explicit check for romstage is clearer. Change-Id: I31454c05029140a946ef663b8fa1b2fa6a788154 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/29401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-01arch/x86: allow global .bss objects without CAR_GLOBALAaron Durbin
For platforms utilizing CONFIG_NO_CAR_GLOBAL_MIGRATION there's no need to automatically migrate globals. Because of this it's possible to automatically allow for uninitialized global variables which reside in the .bss section without needing to decorate those objects with CAR_GLOBAL. Change-Id: Icae806fecd936ed2ebf0c13d30ffa07c77a95150 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/29359 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-01sb/intel/lynxpoint: Add a PCI ID for an SMBus controllerTristan Corrick
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS. Change-Id: Idc222392a0973f9ea62b943d18dd762b48c76d17 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-01sb/intel/lynxpoint: Add PCI IDs for more SKUsTristan Corrick
The PCI IDs were taken from the Intel Lynx Point datasheet [1]. [1] Intel® 8 Series/C220 Series Chipset Family Platform Controller Hub (PCH) Datasheet, revision 003, document number 328904. Change-Id: Ie4a264e9325d185334c3d7f7d2ed3c394ac33059 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-01mb/google/fizz/variants/karma: Rename kalista to karmaDavid Wu
Change the variant name from kalista to karma. According to the CL:1298319, the baseboard name is kalista and the board name is karma. BUG=none BRANCH=master TEST=emerge-kalista coreboot chromeos-bootimage Change-Id: Idea295cc14249721a6dc0fc4e2ef6470d43e16eb Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29314 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-01sb/intel/common/pciehp.h: Add missing license headerElyes HAOUAS
Change-Id: Ia669b25683c138d96be00db90d01cf406db4c2eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29404 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-01src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-31soc/amd/stoneyridge: Fix get_cpu_count()Martin Roth
In commit 41baf0c3ff (soc/amd/stoneyridge: Remove dev_find_slot where possible), the register being read was changed accidentally from HT_DEV (Device 18h, Func 0) to NB_DEV (Device 18h, Func 5) This doesn't return the correct value, and causes Grunt to reboot. BUG=b:118721473 TEST=Boot grunt Change-Id: I7b73358a074dd27639aafead7c8b39f0fad5685f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/29367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-31soc/amd/stoneyridge: Get rid of domain_read_resourcesMartin Roth
The function domain_read_resources() didn't have any code to actually reserve any resources - it was just creating an empty resource entry. I looked at fixing it to actually reserve the space, but the values in the registers at the point when this runs aren't the final values that we want to reserve anyway, they're temp values with a range much larger than we want to reserve. I next looked at moving the amd_initcpuio() function earlier so that we could get the correct values for the registers, but even that doesn't give us what we really want. Ultimately removing this whole function seems to be the right thing. BUG=None TEST=Verify that the only resource that changes is the empty resource: PCI: 00:18.0 resource base 0 size 0 align 0 gran 0 limit 0 flags 1 index 1080 Change-Id: I83bd3ea8db141416632c12fc883386070363f2f1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/29345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-31ec/google/wilco: Unmute audio on initDuncan Laurie
The speakers start up muted, and the EC must be told by the BIOS to unmute it. This helps prevent popping noises on boot/resume. Change-Id: I693f1d01e46e19362ef8fd0d5b3f4930967b5a12 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29203 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add ACPI SuperIO devicesDuncan Laurie
Add ACPI devices for the basic SuperIO functionality provided by the EC for PS/2 keyboard, PS/2 mouse (trackpad emulation), and legacy UART. The specific defines to enable these devices should be declared by the mainboard before including this ASL, the same as the Chrome EC behavior. Change-Id: I910940ebf26b8758ab12d695e1eba9c668c640c6 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI EC event handlersDuncan Laurie
Add methods to handle ACPI EC events at runtime. Currently only some common events are handled like lid switch and battery info, and the event status is printed for debug on other events. Change-Id: Ic0bd070940c8a2dfa6a251f3464301418bdb69c1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI battery and AC objectsDuncan Laurie
Add the expected objects (_BST, _BIF, _BIX) for reading battery information and status from the embedded controller, and the expected objects for reporting AC power status. The battery was tested by booting with a battery attached and checking that it is present in /sys/class/power_supply/BAT0 and that the values are consistent and within expected ranges. The AC device was tested by checking the AC status in sysfs when AC is inserted or removed while the system is running. Change-Id: Ie996891c383c9e990736690aef9795512ad6d35a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add ACPI EC infrastructureDuncan Laurie
Add the base ACPI support for the Wilco embedded controller, using ASL 2.0 syntax throughout. This includes the EC device and its resources, as well as the layout for the EC RAM and the functions needed to read and write to the EC RAM. The EC RAM address space is typically read/write, and so the ACPI EC device expects that a defined Field can be read and/or written. With this EC the read and write address spaces are different. For example, a read from address zero will return data that is unrelated to what a write to address zero expects. This makes using a typical OperationRegion to describe the EC RAM address space somewhat impracticle, since field definitions would overlap. Instead, methods are provided for reading and writing to an EC RAM offset, and the EC RAM layout is defined as a Package that describes offset+mask for read or write fields within the EC RAM. Change-Id: If8cfdf2633db1ccad4306fe877180ba197ee7414 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31ec/google/wilco: Add a bootblock function for early initDuncan Laurie
Add a function for use in bootblock stage that performs early init of the EC, in particular setting it up for UART passthrough so a legacy serial port can be used by the host. This needs to be called by the mainboard that intends to use it in bootblock in order for the UART to be available in later stages. Some of the PNP style programming may look odd, but it is following the EC specification which is not entirely standard. This code has been tested on a board with this EC and it is functional. Change-Id: I9d6935a9fdf0d7290a94bf2ee565ef2a7c00ecc7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29121 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Save and restore PS/2 data for S3Duncan Laurie
Send a command to the EC on the way into S3 suspend state telling it to save the PS/2 data, and on resume send it a command for restoring the PS/2 data that was previously saved. Change-Id: Ic4b5d6d2656dbb1c476b9211b0d60c71b0cd7b32 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29120 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add SMM handlersDuncan Laurie
Add EC handlers for specific SMM actions: - on entry to sleep state tell the EC to save state and to prepare for the host to enter sleep - on ACPI enable/disable send command to the EC - add a function to print SMI reasons when eSPI SMI is received These need to be called by the mainboard handlers which will be done when a board is added that uses this EC. Change-Id: Ibabdc1462e0a8df405f9520244b83684e2ccf2f5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29119 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Report BIOS progress to the ECDuncan Laurie
The EC expects to receive updates about the BIOS boot progress. This is used for the EC logging to track system boot completeness. If the EC is not informed about BIOS progress it will turn the system off 30 seconds after the boot starts. Change-Id: I693c3930117db2b69a119aee0380d6f303c4881c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29118 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add devicetree chip infrastructureDuncan Laurie
Add a chip_operations structure for Wilco EC and hook it into the device tree so it can be initialized at boot. Reserve the device resources specified in Kconfig, which will also create the device IO windows if they have not been created in bootblock. If the IO windows already exist (becauase they were specified in the mainboard devicetree.cb) then this will find the existing entry instead. During device init stage prepare the keyboard for use, which is required for it to be functional in firmware and OS with this EC. Also send a command to the EC telling it to pass the power button through to the host for processing. Change-Id: I0adb01cf394f939f4a28aeb47fe4d0bcda5957d9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29117 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add power related mailbox commandsDuncan Laurie
Add EC mailbox commands that are related to the power and state of the system. These commands include: - read the power status registers from the EC - read & clear the power status registers - helper function to read the current lid state - tell the EC why the host is about to power off - tell the EC that the host is about to enter a sleep state Change-Id: Iaa7051b4006e3c1687933e0384d962516220621f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29116 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add mailbox commandsDuncan Laurie
Add basic supported mailbox commands for this embedded contrlller, and define some command functions to retrieve and print information about the EC. Change-Id: Ibcef7d58e1852fdb2e52b97acd4b51a26dd8cd77 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add mailbox helper functionsDuncan Laurie
Add helper functions that make it more convenient to send and receive the most common types of commands to the Wilco embedded controller. Change-Id: I9cee1a3b2f9d507f6ecdfae9f4a34ba59056cb91 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29114 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-31ec/google/wilco: Add Wilco EC mailbox interfaceDuncan Laurie
The Google "Wilco" Embedded Controller is a new embedded controller that will be used in some future devices. The mailbox interface is simliar to the existing Chromium EC protocol version 3, but not close enough that it was convenient to re-use the full Chrome EC driver. This commit adds the basic mailbox interface for ramstage which will be used by future commits to send varous mailbox commands during the boot process. The IO base addresses for the mailbox interface are defined in Kconfig so they can be changed by the mainboard if needed. Change-Id: I8520dadfa982c9d14357cf2aa644e255cef425c2 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31Veyron: add Hynix H9CCNNNBKTMLBR-NTD ddr with RAMID '00Z1'Loop_Wu
Confirm with RK, H9CCNNNBKTMLBR-NTD uses this sdram config. sdram-lpddr3-hynix-4GB.inc BUG=b:117967129 BRANCH=master TEST=None Change-Id: I98afc33fd2cb61343be0dcdc007add75bee9c2af Signed-off-by: Loop_Wu <Loop_Wu@asus.com> Reviewed-on: https://review.coreboot.org/29366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-31reset: Finalize move to new APINico Huber
Move soft_reset() to `southbridge/amd/common/` it's only used for amdfam10 now. Drop hard_reset() for good. Change-Id: Ifdc5791160653c5578007f6c1b96015efe2b3e1e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-31security/tpm: Add function to measure a region deviceWerner Zeh
Add a new function which can hash a given region device and extend a PCR in the TPM with the result. The needed SHA algorithms are included from 3rdparty/vboot and thus not duplicated in the coreboot tree. For now VB2_LIB is not usable in postcar stage. Follow-up commits will add the ability to use the lib in postcar as well. Once this feature is ready, the library will be included in postcar stage to make this function available in every stage. Change-Id: I126cc3500fd039d63743db78002a04d201ab18aa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/29234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-31security/vboot: build vboot_fw20.a per stagePatrick Georgi
When used more widely across the tree, we don't want to have to worry if all its users are on the same architecture (eg. aarch32 vs aarch64), so just build their own library for each stage. Change-Id: Ib6807ff73c2713f3b23f43055325b2c40ff1a17d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-31soc/intel/apollolake: Revert the w/a nWR_24 settingJohn Zhao
GLK FSP 2.0.6.0 has properly determined MR1 value during InitializeJedec. Revert the w/a code "odt_config |= nWR_24" in coreboot. BUG=b:118422998 CQ-DEPEND=CL:*703187 TEST=Verified booting to kernel. Change-Id: I6dd3c14b2048259a5518e1f72ff1061b9c5c7dfe Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-31mb/google/poppy/variants/nami: Perform PL2 setting for syndraJohn Su
According to syndra thermal table, PL2 need to check cpu id. Set up syndra PL2 value. 1. KBL_U PL2 is 25w. 2. KBL_R PL2 is 29w. Refer to b:116836990#comment10. BUG=b:116836990 TEST=The thermal team verify OK Change-Id: I766a886121a089683565608252b4c176c70e88a3 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Shelley Chen <shchen@google.com>
2018-10-31soc/intel/icelake: Open ports 0x60,0x64 for keyboard controllerShelley Chen
BUG=b:112110028 BRANCH=none TEST=boot into recovery in ec console: kblog on (type on keyboard) kblog make sure buffer is not empty Change-Id: I6525c2a46eef835dc64682466364a5b8fbb35226 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/29327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-10-30src: Move shared amd64 and IA32 MSRs to <cpu/x86/msr.h>Elyes HAOUAS
Change-Id: Ic9022a98878a2fcc85868a64aa9c2ca3eb2e2c4e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29177 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-30{cpu,drivers,nb,sb}/amd: Replace {MSR,MTRR} addresses with macrosElyes HAOUAS
Change-Id: I7e8de35dcdad52bb311b34bfa9b272d17ed3186b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29243 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-30soc/amd/stoneyridge: Set IOMMU support to follow device settingMartin Roth
Instead of forcing the IOMMU to be enabled, change it to only be enabled if the device is enabled in devicetree. BUG=b:118612241 TEST=Verify that IOMMU is disabled. Change-Id: I6cfd6c81f47de23c54a49ec7cf87b219215ced5e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/29343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-10-30mb/google/kahlee: Disable IOMMUMartin Roth
Unfortunately Stoney has an issue where enabling the IOMMU causes a 10%-50% decrease in the integrated graphics performance. It is also disabled by default on other stoney platforms. BUG=b:118612241 TEST=Verify that IOMMU is disabled. Change-Id: Ia396c7227cb21461ec8afbdf746721d4fb28083d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/29342 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-30soc/amd/stoneyridge: Remove dev_find_slot where possibleRichard Spiegel
The procedure dev_find_slot has 3 main uses. To find configuration (devicetree), to verify if a particular device is enabled at build \ time, and to get the address for PCI access while in bootblock/romstage. The third use can be hidden by using macros defined in pci_devs.h, making it very clear what PCI device is being accessed. replace the temporary pointers to device used with PCI access with SOC_XXX_DEV where XXX is the device being accessed, and remove the setting of the temporary pointers. BUG=b:117917136 TEST=Build grunt. Change-Id: Ic38ea04bfcc1ccaa12937b19e9442a26d869ef11 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-30siemens/mc_apl3: Add new mainboard variant mc_apl3Mario Scheithauer
This mainboard is based on mc_apl1. In a first step, it concerns a copy of mc_apl1 directory with minimum changes. Special adaptations for mc_apl3 mainboard will follow in separate commits. Change-Id: I963ec63bccf71296c3fdabfcf9f3009c2febc791 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/29353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-10-30drivers/spi: Winbond specific write-protection enablePatrick Rudolph
Extend the SPI interface to enable write-protection. Tested on Cavium EVB CN81xx using W25Q128. Change-Id: Ie3765b013855538eca37bc7800d3f9d5d09b8402 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-30security/tpm: Fix references to tpm_setup functionJonathan Neuschäfer
Change-Id: Ia97ddcd5471f8e5db50f57b67a766f08a08180b1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/29349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-30src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: I6a9d71e69ed9230b92f0f330875515a5df29fc06 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29312 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-30Documentation/riscv: Improve `index.md`Paul Menzel
1. Add dot/period to the end of sentences 2. Remove blank line at the end of the file 3. Break lines after 75 characters 4. Use RISC-V spelling 5. Add comma for clarity Change-Id: Icbe803dfbe92ca7850204a1a9f7175befe9c8bcf Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/28654 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-30riscv: simplify timer interrupt handlingPhilipp Hug
Just disable the timer interrupt and notify supervisor. To receive another timer interrupt just set timecmp and enable machine mode timer interrupt again. TEST=Run linux on sifive unleashed Change-Id: I5d693f872bd492c9d0017b514882a4cebd5ccadd Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/29340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-10-30src/arch/riscv/misaligned.c: Fix an off-by-one error when loading the opcodePhilipp Hug
Pointer to opcode increases by unit uint16_t not byte. Change-Id: I2986ca5402ad86d80e0eb955478bfbdc5d50e1f5 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/29339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-10-30sifive/fu540: correct cbmem supportPhilipp Hug
Return correct memory location for cbmem instead of incorrectly returning memory size. Change-Id: If7f490a46edebb04c2280bf317d1adacef08f30d Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/29197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xiang Wang <wxjstz@126.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-30Add selfboot to the romstageRonald G. Minnich
Now that bounce buffers are gone, and we can elide the selfload checking code at build time, it is safe to add selfboot to the romstage. Make it so. This required a few other tweaks to rules.h and selfboot.c to make it buildon ARM. Change-Id: Ib6540921ad7cd7d58bfeab881d3978325b303cc2 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/29338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-29x86/mp_init: Add configurable stack size for SMM relocateMarshall Dawson
A stack overrun has been observed on AMD64 CPUs during the SMM module relocation process. Change the assumed required size from equaling the save structure's size to a Kconfig symbol. A value of 0x400 doubles the size used by AMD64 systems and maintains the size used by EM64T. BUG=b:118420852 TEST=S3 on Grunt and verify 0x2f000-0x30000 uncorrupted Change-Id: Ib1d590ee4afb06ca649afd6ad253cdfd969ae777 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-29mb/google/poppy/variants/nami: Add field to identify single channel DDRShelley Chen
Variants of Nami need to accommodate single channel DDR. Will use GPP_D10 on nami for identification. GPP_D10 will return 1 when device is using single channel DDR and 0 when using dual channel DDR. BUG=b:117194353 BRANCH=None TEST=dmidecode | grep Channel and make sure that the correct number of channels gets returned. Change-Id: If86ab2c5404c4e818ce496ea935227ab5e51730a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/29233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-29src/drivers/pc80/tpm/tis.c: Dont use port value when invalid.Frans Hendriks
port is allocated in ACPI, without checking for value. Don't use port value when zero. BUG=N/A TEST=Portwell PQ-M107 Change-Id: Ia44281b82d003b29bffbf985b774ddd661b65c4e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/29331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-29mb/lenovo/t430: Set USB always on when calling SMI sleepPeter Lemenkov
Looks like we must do it in the same way as in l520, t420, t420s, t430s, t520, t530, x201, x220, x230 models. No idea why t430 should be handled differently. Change-Id: Ic4851022267caca267b667b4e3c327838e0a0b66 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29031 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 03:52:18 +0000