summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-25nb/amd/mct_ddr3: Scale lane delays for each DIMM after MEMCLK changeTimothy Pearson
When more than one DIMM is installed on a DCT, only the first DIMM delay values are scaled to the new memory clock frequency after a memory clock change during write leveling. Store the previous memory clock of each DIMM during write leveling to ensure that every DIMM has its delay values rescaled. Change-Id: I56e816d3d3256925598219d92783246f5f4ab567 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14479 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-25board_status/to-wiki: Indicate age of test results by background colorTimothy Pearson
A major issue with the board-status Wiki page is that it shows all test results equally regardless of age. As a test result ages it becomes more likely that the board no longer works peroperly under coreboot due to code churn. Visually indicate board-test status "at a glance" by smoothly fading the background color of the test result from green to yellow as the test result ages. This patch sets the full yellow transition to 255 days after test for programming convenience, however the number of days required to fully "stale" a test result could be modified relatively easily. Change-Id: I5a076a6cc17d53fda8e4681e38074fc1f46c0e12 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14457 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2016-04-25payloads/Makefile.inc: Add phony targetsMartin Roth
Add 'nvramcui' target to make it easier to build and test. Put both nvramcui & coreinfo targets into .PHONY because they both exist as directories. Change-Id: I9cf76785e69f3c8e47fe92f1b1648fd0f7a63c3e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14481 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-24Reject duplicate results in board-status.Huimin Zhang
This is in response to issue #28: board-status should reject duplicate uploads. Change-Id: Iff99be154b35e8c0f9f05f9470d1c2dcff8510b8 Signed-off-by: Huimin Zhang <thehobn@gmail.com> Reviewed-on: https://review.coreboot.org/14187 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22fmaptool: Make sure strings are not destroyed on hdestroy()Stefan Reinauer
On Mac OS X hdestroy seems to overwrite node->name. Hence duplicate the string before stuffing it into the hash search table. Change-Id: Ieac2025f5c960cdb8d509dde7e92ba0dd32644b0 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14443 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-22drivers/ricoh: Fully switch to src/drivers/[X]/[Y]/ schemeStefan Reinauer
The previous commit removed Kconfig, but not Makefile.inc Change-Id: If46a0a3e253eea9d286d8ab3b1a6ab67ef678ee4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14419 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22soc/intel/quark: Fix MTRR readsLee Leahy
Remove offset override improperly added in the "Disable the ROM shadow" patch TEST=Build and run on Galileo Gen2 Change-Id: I32fb2da48e3769d59a49619539053f9afdf63b04 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14450 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22soc/intel/quark: Fix uninitialized variable d_variantLee Leahy
Initialize the d_variant variable. Found-by: CID 1353356 Uninitialized variable TEST=Build and run on Galileo Gen2 Change-Id: I26fba4e77f91d53b6ff9028669aa0186d3174639 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14338 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22Revert "nb/amd/mct_ddr3: Disable MCE framework during DRAM training"Timothy Pearson
After substantial testing it has been determined that it is neither required nor safe to disable the DRAM MCA during initial startup. This (mostly) reverts commit c094d9961144871c472698c41ce634e58abb6a32. The minor debugging enhancements from that commit were left in place. Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Config-RAM: 1x Kingston 9965516-483.A00LF Change-Id: I58fcc296b8c45ecaedf540951c365e4ce52baaf5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14446 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Enhance debugging around MEMCLK frequency changeTimothy Pearson
Change-Id: I5056cf885b7063a97c095bfaaf01dd8da777a425 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14447 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Fix RDIMM training on certain DIMMsTimothy Pearson
Certain RDIMMs have inherently large write levelling delays, in some cases exceeding 1.5 MEMCLK. When these DIMMs are utilized, the phase recovery system requires special handling due to the resultant offset exceeding the phase recovery reporting capabilities. Fix an old error where delays > 1.5 MEMCLK were not being programmed (gross delay high bit was not in set range), and restore special delay handling for delays greater than 1.5 MEMCLK. Also enhance debugging for x4 DIMMs around the affected code. Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Change-Id: I0fb5454c4d5a9f308cc735597607f095fe9188db Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14441 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Run fence training on each node after memory clock changeTimothy Pearson
The BKDG requires phy fences to be re-trained after a memory clock change. Memory training on the ASUS KGPE-D16 and KCMA-D8 somehow "mostly" worked -- without actually following this requirement -- ! Fix the single typo that caused several weeks of delay in putting servers with Kingston RAM (and others) into production... Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Change-Id: I197e6728d2b0ac8c1535740599459d080b17af33 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14445 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22soc/intel/apollolake: Flush L1D to L2 only if loaded segment is in CARFurquan Shaikh
In program_segment_loaded, flush L1D to L2 only if the address of the loaded segment lies in the CAR region. Add an assert to ensure that the loaded segment does not cross CAR boundaries. Change-Id: Ie43e99299ed82f01518c8a1c1fd2bc64747d0c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14449 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-22intel/i82801ax: Fix IDE setup console logPatrick Georgi
Fixes two issues: 1. In (the unlikely) case that dev->chip_info is NULL, the output was depending on an unknown value near the start of the address space. 2. Output for the secondary interface actually printed the primary interface's configuration. Change-Id: Id0f499a85e6e2410b4efd63baf7fffb2fcaa3103 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14361 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-22lint/checkpatch.pl: escape \{ in perl regex to fix warningsAlexander Couzens
Fix warnings: Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\#\s*define.*do\s{ <-- HERE / at util/lint/checkpatch.pl line 3261. marked by <-- HERE in m/\(.*\){ <-- HERE / at util/lint/checkpatch.pl line 3750. marked by <-- HERE in m/do{ <-- HERE / at util/lint/checkpatch.pl line 3751. marked by <-- HERE in m/^\({ <-- HERE / at util/lint/checkpatch.pl line 4194. Change-Id: If0c1f07a16df9e6cd1c1393a31af8b8ea6a66b01 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14310 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-21util/lint: Find unsigned variables with no length specifiedMartin Roth
The coding guidelines say that all objects should have fully qualified types (unsigned int instead of unsigned). This script finds violations of that rule. Steps for the filter: 1) Find all lines in the coreboot tree that have the word 'unsigned' followed by a space. 2) Exclude directories that aren't in the include list or are specifically excluded. 3) Exclude files that aren't specifically included. 4) Filter out legimitate uses 'unsigned int' or 'unsigned long' for example. 5) Filter out lines that begin with '/*' or '*' Change-Id: I46213c6a168e6aafa29a50af814bf7e0fcd32eb6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14269 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-21libpayload: time: split time.h from libpayload.hStef van Os
Move time functions and prototypes from libpayload.h to time.h. In a similar manner to other c libary headers, this change makes porting existing applications to libpayload easier. Change-Id: I71e27c6dddde6e77e0e9b4d7be7cd5298e03a648 Signed-off-by: Stef van Os <stef.van.os@prodrive-technologies.com> Reviewed-on: https://review.coreboot.org/14437 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-21lint: Add check for amd & apple mainboard license headersMartin Roth
Change-Id: Idda4b7179e3e7b3f5b70be810b428b0651c1cd67 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21coreinfo: Build libpayload in coreinfo directoryIru Cai
When building libpayload, make the build directory and .config outside libpayload source directory so it'll not pollute the libpayload source and cause conflicts with other builds. Change-Id: Idcfbc7dbe4d52a3559229d8450c3efaafd33b93b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14389 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-21lib: add common write_tables() implementationAaron Durbin
In order to de-duplicate common patterns implement one write_tables() function. The new write_tables() replaces all the architecture-specific ones that were largely copied. The callbacks are put in place to handle any per-architecture requirements. Change-Id: Id3d7abdce5b30f5557ccfe1dacff3c58c59f5e2b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14436 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/coreboot_table: add architecture hooks for adding tablesAaron Durbin
Add a architecture specific function, arch_write_tables(), that allows an architecture to add its required tables for booting. This callback helps write_tables() to be de-duplicated. Change-Id: I805c2f166b1e75942ad28b6e7e1982d64d2d5498 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14435 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/bootmem: allow architecture specific bootmem rangesAaron Durbin
A architecture-specific function, named bootmem_arch_add_ranges(), is added so that each architecture can add entries into the bootmem memory map. This allows for a common write_tables() implementation to avoid code duplication. Change-Id: I834c82eae212869cad8bb02c7abcd9254d120735 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14434 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib: add helper for constructing coreboot forwarding tableAaron Durbin
The x86 architecture needs to add a forwarding table to the real coreboot table. Provide a helper function to do this for aligning the architectures on a common write_tables() implementation. Change-Id: I9a2875507e6260679874a654ddf97b879222d44e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14433 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/x86: remove low coreboot table supportAaron Durbin
In addition to being consistent with all other architectures, all chipsets support cbmem so the low coreboot table path is stale and never taken. Also it's important to note the memory written in to that low area of memory wasn't automatically reserved unless that path was taken. To that end remove low coreboot table support for x86. Change-Id: Ib96338cf3024e3aa34931c53a7318f40185be34c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14432 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/x86: clean up write_tables()Aaron Durbin
There were quite a number of #if/#endif guards in the write_tables() code. Clean up that function by splitting up the subcomponents into their own individual functions. The same ordering and logic is kept maintained. The changes also benefit the goal of using a common core write_tables() logic so that other architectures don't duplicate large swaths of code. Change-Id: I93f6775d698500f25f72793cbe3fd4eb9d01a20c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14431 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch: only print cbmem entries in one placeAaron Durbin
Each arch was calling cbmem_list() in their own write_tables() function. Consolidate that call and place it in common code in write_coreboot_table(). Change-Id: If0d4c84e0f8634e5cef6996b2be4a86cc83c95a9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14430 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch: use Kconfig variable for coreboot table sizeAaron Durbin
Instead of hard coding a #define in each architecture's tables.c for the coreboot table size in cbmem use a Kconfig varible. This aids in aligning on a common write_tables() implementation instead of duplicating the code for each architecture. Change-Id: I09c0f56133606ea62e9a9c4c6b9828bc24dcc668 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14429 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/riscv/tables: remove confusion over write_tables()Aaron Durbin
Apparently the memo was missed about the write_tables() signature. Fix the confusion. Change-Id: I8ef367345dd54584c57e9d5cd8cc3d81ce109fef Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14421 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/power8/tables: remove confusion over write_tables()Aaron Durbin
Apparently the memo was missed about the write_tables() signature. Fix the confusion. Change-Id: I63924be47d3507d2d7ed006a553414f4ac60d2f9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14420 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21soc/intel/apollolake: Set default memory type to uncacheableFurquan Shaikh
Set the default memory type in MTRRCap register to 0. This ensures that even if the MTRR Enable bit is set in MTRRCap register, the default memory type is still uncacheable. Change-Id: I63e7993f8b65dabbab60e7c1bb8d6d89ef4da9ee Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14428 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-21AGESA vendorcode: Fix type mismatchKyösti Mälkki
Fix is required to compile AGESA ramstage without raminit. Change-Id: I783883fa7a12e8a647aa432535bb990a47257e9b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14416 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com>
2016-04-21xcompile: support being called from payloads/external/.../.../Stefan Reinauer
Change-Id: Icc1361fdd3a8369c4b442ce5b8807c549519c93a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14387 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21imgtec/pistachio: Fix memlayout ASSERT with new binutilsStefan Reinauer
With binutils 2.26 our memlayout ASSERT for mirrored SRAM regions gets confused due to the lack of parentheses grouping the expressions. This fixes the following issue: LINK cbfs/fallback/bootblock.debug mipsel-elf-ld.bfd: bootblock and gram_bootblock do not match! mipsel-elf-ld.bfd: romstage and kseg0_romstage do not match! Change-Id: Ib406e229b8a552d9ffc4538b55ee0269bfed62a8 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14440 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-04-21mainboard/apple: add license headersNoah Glovsky
Change-Id: Id9487212411e5c237d26eb4e5663135f7d0720d1 Signed-off-by: Noah Glovsky <noah.glovsky@watershedschool.org> Reviewed-on: https://review.coreboot.org/14425 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-21mainboard/amd: add license headersNoah Glovsky
Change-Id: Ida8e81c88b2016d90cc8305edfb199143f859ec2 Signed-off-by: Noah Glovsky <noah.glovsky@watershedschool.org> Reviewed-on: https://review.coreboot.org/14422 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-20intel/fsp_broadwell_de: fix SPD CBFS file typeStef van Os
File type for SPD in this soc is defined as CBFS_TYPE_RAW in Makefile, but CBFS_TYPE_SPD in code. Causes DDR SPD not to be loaded on memory down. Tested on Prodrive Technologies Broadwell-D 1548 module: http://prodrive-technologies.com/amc-ix5-intel-broadwell-de-platform/ Change-Id: I44525b4742b3f93d33f0c5bd9ed642c6fb06f23f Signed-off-by: Stef van Os <stef.van.os@prodrive-technologies.com> Reviewed-on: https://review.coreboot.org/14415 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: York Yang <york.yang@intel.com>
2016-04-20soc/intel/apollolake: add definitions for direct IRQBora Guvendik
Change-Id: Ife26f5cf6a06a1a5bf965bbeed7a740a990e8f7f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/14399 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-20mainboard/amenia: add the inital files for amenia boardZhao, Lijian
Add amenia board files Change-Id: I6731a348b4c0550d3b9381adb5fb83719f90a5da Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/14352 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-20soc/intel/apollolake: configure interrupt trigger modeJagadish Krishnamoorthy
Provide trigger option to configure APIC, sci, smi, nmi interrupts. Change-Id: I1b553fb4ed1b43aba62346f5b758f8d082606510 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/14353 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-20vboot: Compile loader in postcar as wellAndrey Petrov
Change-Id: Ide3202fca75c77ccebf17d61d93945ba7834a13b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14398 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-20add nvramcui as a secondary payloadIru Cai
Change-Id: Ie38a358ebd2d040ce32b3eeaeb664c568d4dc51e Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14378 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-04-20nvramcui: Update MakefileIru Cai
* use crossgcc to build nvramcui * build libpayload dependency Change-Id: Ife3054aeb03b4da0568ad47f96c633460d6c07ae Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14377 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-20AGESA vendorcode: Suppress maybe-uninitialized warningsKyösti Mälkki
Compiling libagesa with -O2 would throws error on these. Change-Id: I04afa42f0ac76677f859ca72f9df2e128762ad3c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14413 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-20AGESA vendorcode: Fix logic errorKyösti Mälkki
We have not really hit this error, due the test on AGESA_UNSUPPORTED above. Change-Id: I6e7d136a1bb46138cc347225bc4c82cfeaff385d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-20AMD CIMX: Drop unused codeKyösti Mälkki
We never define B1_IMAGE or B2_IMAGE. These are about building CIMx as separate binary modules, while coreboot builds these into same romstage or ramstage module. Change-Id: I9cfa3f0bff8332aff4b661d56d0e7b340a992992 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kerry Sheh <shekairui@gmail.com>
2016-04-20mb/lenovo/x220: disable MEAlexander Couzens
The ME hangs, the lspci shows no memory and the linux kernel tries to request irq 0 twice. After suspend-resume the linux kernel warns about double used irq. genirq: Flags mismatch irq 0. 00000080 (mei_me) vs. 00015a00 (timer) mei_me 0000:00:16.0: request_threaded_irq failed: irq = 0. dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -16 PM: Device 0000:00:16.0 failed to resume async: error -16 Change-Id: I56ef66388e58dddcfb858294ba274621c55fbef6 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14309 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-04-20crossgcc/Makefile.inc: Update jenkins-build-toolchainMartin Roth
Because the builders have the coreboot cross-compilers in their path, the XGCCPATH variable needs to be set after building the new toolchain before it will be used. - Add $DEST/bin to $PATH if $DEST is set, add the default location for toolchain builds otherwise. Because the jenkins build image puts the tools in the path, we ca - Add KEEP_SOURCES option to help speed up compilation (Slightly). - Log .xcompile for verification that the right toolchain was used. - Verify that test-toolchain passes. Change-Id: I7c270dab94be7e8f801d527169767018a24986e4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14231 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-19MAINTAINERS: Add maintainer for Pineview & x4x chipsets & boardsMartin Roth
Change-Id: I3c34f6e69b3760a10e67bdc41c8ef0e629beb881 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14129 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-19drivers/ricoh: Switch to src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Change-Id: I3cf32ec58ba40db11fae3dda6dcb2375002e7cb4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14052 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-19drivers/generic: Switch to src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Change-Id: Ide0d48405d85ea2e889916f778e1556287651707 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14057 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-04 15:53:22 +0000