summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-04mb/intel/{galileo,wtm2}: Use macro instead of magic numberElyes HAOUAS
Change-Id: Ib8a08e9f854b2b0786c69943d6dbb66abe3ad4d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33438 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04mb/google/kukui: Extend FMAP to 8MB layoutHung-Te Lin
The SPI flash component requirement for Kukui family is 8M so we should update FMAP for that: - Add more comments for alignment and size recommendation. - Enlarge RO to 4M, and RW_SECTION_{A,B} both ~1.5M. - BOOTBLOCK: 32K->128K, aligned with other ARM boards. - Preserve RW_DDR_TRAINING for new calibration. - Reorder the sections for better alignment. - RW_MISC to contain RW sections that should be merged when creating AU image. BUG=b:134624821 TEST=Built Kukui image and boots. dump_fmap -h image-kukui.bin: # name start end size RW_LEGACY 00700000 00800000 00100000 RW_SHARED 006f7000 00700000 00009000 RW_UNUSED 006f8000 00700000 00008000 SHARED_DATA 006f7000 006f8000 00001000 RW_SECTION_B 00580000 006f7000 00177000 RW_FWID_B 006f6f00 006f7000 00000100 FW_MAIN_B 00582000 006f6f00 00174f00 VBLOCK_B 00580000 00582000 00002000 RW_MISC 00577000 00580000 00009000 RW_ELOG 0057f000 00580000 00001000 RW_DDR_TRAINING 0057d000 0057f000 00002000 RW_NVRAM 0057b000 0057d000 00002000 RW_VPD 00577000 0057b000 00004000 RW_SECTION_A 00400000 00577000 00177000 RW_FWID_A 00576f00 00577000 00000100 FW_MAIN_A 00402000 00576f00 00174f00 VBLOCK_A 00400000 00402000 00002000 WP_RO 00000000 00400000 00400000 RO_VPD 003f8000 00400000 00008000 RO_SECTION 00000000 003f8000 003f8000 RO_FRID 003f7f00 003f8000 00000100 GBB 003f5000 003f7f00 00002f00 COREBOOT 00021000 003f5000 003d4000 FMAP 00020000 00021000 00001000 BOOTBLOCK 00000000 00020000 00020000 Change-Id: Id342d57dc95c6197d05b8a265742a2866c35ae09 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-04mb/facebook/fbg1701: Remove ONBOARD_MICRON_MEMFrans Hendriks
ONBOARD_MICRON_MEM and ONBOARD_SAMSUNG_MEM are available. These are used to determine if Samsung or Micron onboard memory is assembled. This can not detected run-time. Choice is replaced by one config. Only oldest HW revision contains Samsung module, so set CONFIG_ONBOARD_SAMSUNG memory to default No. BUG=N/A TEST=Boot and verified on Facebook FBG-1701 Change-Id: Id65e92bd4b8d4fe3a6b87dec9bf77e3a62e1be96 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04mb/supermicro/x11-lga1151-series: rework documentationMichael Niewöhner
This splits the x11-lga1151-series' documentation into a generic and a board specific section as a preparation for CB:35427. Additionally this adds some more information on the x11ssh board. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I40ddd0b5cce0b1a3306eae22fc0a0bc6b2a6263c Reviewed-on: https://review.coreboot.org/c/coreboot/+/35547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04device/pci_device.c: Use verified boot to check opromFrans Hendriks
Before oprom is executed, no check is performed if rom passes verification. Add call to verified_boot_should_run_oprom() to verify the oprom. verified_boot_should_run_oprom() expects and rom address as input pointer. *rom is added as input parameter to should_run_oprom() which must be parsed to verified_boot_should_run_oprom().. BUG=N/A TEST=Created verified binary and verify logging on Facebook FBG1701 Change-Id: Iec5092e85d34940ea3a3bb1192ea49f3bc3e5b27 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-04soc/skl/vr_config: fix KBL-U GT3 detection bugMaxim Polyakov
Some VR parameter values for KBL-U with GT3 graphics are different from values for other CPUs in this series [1]. However, GT3 iGPU will never be detected, since the igd_id variable is compared with the LPC device PCI ID. The patch fixes this bug. [1] page 109, 7th Generation Intel(R) Processor Families for U/Y Platforms and 8th Generation Intel(R) Processor Family for U Quad Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019. Document Number: 334661-006 Change-Id: I33527d90550a1de78c9375d3d3b0e046787a559b Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04soc/skl/vr_config: fix GT Loadline for KBL-U/GT3Maxim Polyakov
According to the documentation[1], the Loadline in the unslased GT VR domain should be 2 mOhms for KBL-U (2 Core, GT3 + OPC). [1] page 109, 7th Generation Intel(R) Processor Families for U/Y Platforms and 8th Generation Intel(R) Processor Family for U Quad Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019. Document Number: 334661-006 Change-Id: I433036e76d456a725ab27cf57c9bc2fe01a7ace1 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35781 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04src/pci_ids: add missing Intel Kaby Lake iGPU PCIIDsMaxim Polyakov
Adds missing Intel HD/Iris iGPU PCI IDs for Kaby Lake processors and updates the platform report for these devices. These changes are in accordance with the documentation: [*] page 10, Intel(R) Open Source HD Graphics and Intel Iris(TM) Plus Graphics for the 2016 - 2017 Intel Core(TM) Processors, Celeron(TM) Processors, and Pentium(TM) Processors based on the "Kaby Lake" Platform. Programmer's Reference Manual. Volume 4: Configurations. January 2017, Revision 1.0 Doc Ref # IHD-OS-KBL-Vol 4-1.17 [*] Linux kernel sources: include/drm/i915_pciids.h Change-Id: I1cd1e4ab82f756141f8f13edf1c17f726166dffb Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04src/pci_ids: add missing Intel Skylake iGPU PCIIDsMaxim Polyakov
Adds missing Intel HD/Iris iGPU PCI IDs for Skylake processors These changes are in accordance with the documentation: [*] page 11-12, Intel(R) Open Source HD Graphics, Intel Iris(TM) Graphics, and Intel Iris(TM) Pro Graphics, Programmer's Reference Manual. Volume 4: Configurations. May 2016, Revision 1.0 Doc Ref # IHD-OS-SKL-Vol 4-05.16 Change-Id: I0ba6e58ec3916dceea00519ac5a51503573e8935 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35493 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04soc/skl/vr_config: set Iccmax_gt depends on CPU/GTMaxim Polyakov
According to the DC Current Specifications [1], the current limit for the graphical VR domain (Iccmax_gt) isn't same for different Kaby Lake S CPUs. This value should depend on the iGPU model and processor TDP: +---------------------+-----+------------+ | Segment | TDP | Icc_max GT | +---------------------+-----+------------+ | Dual Core GT2/GT1 | 35W | | | Dual Core GT2 | 51W | 48 A | | Dual Core GT1 | 54W | | +---------------------+-----+------------+ | Quad Core GT2 | 35W | 35 A | +---------------------+-----+------------+ | Quad Core GT2 | 65W | 45 A | | Quad Core GT2 K-SKU | 91W | | +---------------------+-----+------------+ This patch adds the remaining Iccmax_gt current limit values from the documentation [1]. [1] 7th Generation Intel(R) Processor Families for S Platforms and Intel(R) Core(TM) X-Series Processor Family Datasheet, Volume 1, December 2018, Document Number: 335195-003 Change-Id: I19766e4f8fab6b48565b65ed4cf13efbc213e654 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04mb/facebook/fbg1701: Add measured boot supportFrans Hendriks
No support is available in mainboard. Add support to mainboard: - Add mb_log_list[] - Add routine mb_crtm() BUG=N/A TEST=Boot Embedded Linux 4.20 and verify logging on Facebook FBG-1701 Change-Id: I5120ffb6af0b41520056e1773f63b7b2f34a2460 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-10-04mb/facebook/fbg1701: Add verified boot tablesFrans Hendriks
The vendorcode for verified boot is uploaded, but not used by a mainboard. Add support to the mainboard for verified boot. The items to be verifed are placed in board_verified_boot.c BUG=N/A TEST=Boot Embedded Linux 4.20 and verify logging on Facebook FBG-1701 rev 0-2 Change-Id: I3ea0a95287977df0dea13e05acedd5406538a6ee Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33463 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04vendorcode/eltan/security/verified_boot: Add verified boot supportFrans Hendriks
Create verified boot support, which includes verifiication of bootblock. This feature use the vendorcode/eltan/security/lib. cbfs_locator is used to init the verified boot support. vendor_secure_prepare() and vendor_secure_locate() are used to preform the required action in each stage. The next lists will be used for verification: * bootblock_verify_list * postcar_verify_list * romstage_verify_list * ramstage_verify_list BUG=N/A TEST=Created binary and verify logging on Facebook FBG-1701 Change-Id: If6c1423b0b4a309cefb7fe7a29d5100ba289e0b4 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-04vendorcode/eltan/security/mboot: Add measured boot supportFrans Hendriks
Create measured boot. This feature uses the vendorcode/eltan/security/lib. Measure boot can work with and without Verified boot enabled. The function mb_measure() is starting point for the support. This function will be called by the common Verified boot code. BUG=N/A TEST=Created binary and verify logging on Facebook FBG-1701 Change-Id: I7f880a17e240515dd42d57383b5ddddf576985b0 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-04arch/x86/acpi: Add SSDT for QEMUPatrick Rudolph
Add a SSDT on qemu and place BOOT0000 inside it to allow testing the google firmware kernel module in qemu. Tested on Qemu Q35. Change-Id: Ibd1b2c2f4fc3db9ae8f338b0d53b2d00ea2c4190 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HIMANSHU SAHDEV <sahdev.himan@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-03Update arm-trusted-firmware submodule to upstream masterPatrick Georgi
Updating from commit id 42cdeb93: 2019-09-13 12:09:21 +0000 - (Merge "stm32mp1: manage CONSOLE_FLAG_TRANSLATE_CRLF and cleanup driver" into integration) to commit id ace23683: 2019-09-27 09:54:27 +0000 - (Merge changes from topic "ld/stm32-authentication" into integration) This brings in 83 new commits. Change-Id: I273b5014db76d307d8735d78a8fdd5db3d07146c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-03cpu/intel/: Fix regression with smmrelocateKyösti Mälkki
Fix regression with commit d53fd70 intel/smm/gen1: Use smm_subregion(). The bitmask on SMRR register parameter was inverted for selected models. Change-Id: Ia572ca3bdd4da371985691b5d249f998382fbe48 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-03ec/google/chromec: Default EC_GOOGLE_CHROMEEC_LPC to disabledMartin Roth
Don't set a default bus type for the Chrome EC on x86. The platform must select the bus, typically LPC or ESPI. BUG=b:140055300 TEST=Build tested only Change-Id: I736cb9e43292a1b228cd083ca81a8e5db383e878 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-03mb/[google/intel]/*: Specify Chrome EC bus - LPC or ESPIMartin Roth
Previously all boards using eSPI for the Chrome EC just called it LPC as the code for the chrome EC is the same between the two busses. I'm adding a new Kconfig symbol to specify eSPI, so switch the boards that actually use eSPI to that symbol and add the LPC symbol to all the others. The EC_GOOGLE_CHROMEEC_LPC symbol will no longer default to enabled for x86 platforms, so one symbol or the other needs to be specified for each platform. BUG=b:140055300 TEST=Build tested only. Change-Id: Icf242ca2b7d8b1470feda4e44b47a2cdc20680f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-03southbridge/intel: Add config option to validate firmware descriptorMathew King
Add new config option to validate the Intel firmware descriptor against the fmap layout. This will prevent a firmware descriptor from being used that could corrupt regions of the bootimage in certian circumstances. BUG=chromium:992215 TEST=Build firmware image with mismached decriptor and fmp Without VALIDATE_INTEL_DESCRIPTOR set firmware builds With VALIDATE_INTEL_DESCRIPTOR set error is shown with mismached regions Change-Id: I9e8bb20485e96026cd594cf4e9d6b11b2bf20e1f Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03ifdtool: Add validate option to ifdtoolMathew King
Add an option to ifdtool which validates that the flash regions defined in the descriptor match the coresponding areas in the FMAP. BUG=chromium:992215 TEST=Ran 'ifdtool -t' with a good bios image and verify no issues run 'ifdtool -t' with a bad bios image and verify expected issues Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Idebf105dee1b8f829d54bd65c82867af7aa4aded Reviewed-on: https://review.coreboot.org/c/coreboot/+/34802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03libpayload: refactor fetching cbmem pointersPatrick Georgi
There's a recurring pattern of reading cbtable entries that point into cbmem entries. Move that pattern into its own function. Coccinelle patch used for this: @@ identifier T, T2; expression TARGET; @@ -struct cb_cbmem_tab *const T2 = (struct cb_cbmem_tab *)T; -TARGET = phys_to_virt(T2->cbmem_tab); +TARGET = get_cbmem_ptr(T); Change-Id: I7bd4a7ad8baeeaebf0fa7d4b4de6dbc719bc781f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03sb/intel/i82801gx: Use symbolic name for register, code reworkPetr Cvek
An original code had a wrong register address 0x27 for AHCI BAR. The value was aligned incidentally by the code specific of the pci_read_config32 function to the correct address 0x24. All 0x24 values in sata.c were changed to the symbolic name PCI_BASE_ADDRESS_5 and the code was optimized. An equivalent code was tested on a real hardware. Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Change-Id: I33509befe86ff6e333c559c87a0f45886d737df9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35737 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03mb/facebook/fbg1701/devicetree.cb: Use 64MB framebuffer sizeFrans Hendriks
Connected 4K monitor is not configured at max resolution. The framebuffer size is too small. Increase the framebuffer size to 64MB. This is sufficient for max configuration of 1 HDMI monitor combined with internal LCD panel. BUG=N/A TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701 Change-Id: I25d2cd696830fc5bda84ea2b87538f526373998e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-03soc/intel/braswell/chip.h: Add IGD_MEMSIZE_xxMBFrans Hendriks
Add defines to have some more readable code for devcietree.cb. BUG=N/A TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701 Change-Id: Ifc1a7657a528d1fc570dd16df66b078e37e014cb Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-03mb/facebook/fbg1701: Add mainboard_read_pcb_version()Frans Hendriks
PCB version is determined using inb() in actual code. Create function mainboard_read_pcb_version to read pcb version. BUG=N/A TEST=Boot and verified on Facebook FBG-1701 Change-Id: I7c16627f468d84ca4ad2aab8bf9fb555f50dc23c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-03Update chromeec submodule to upstream masterPatrick Georgi
Updating from commit id 860fe2962: 2018-12-29 05:45:29 -0800 - (mt_scp/ipi: Support host command.) to commit id a1afae4e0: 2019-10-02 11:47:45 +0000 - (juniper: initial setup) This brings in 1723 new commits. Change-Id: Ieb4f00b21a4354bb634c3427c73260123b54ac2a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03Update opensbi submodule to upstream masterPatrick Georgi
Updating from commit id ce228ee: 2019-07-02 11:11:08 +0530 - (include: Bump-up version to 0.4) to commit id e561c63: 2019-10-02 17:03:58 +0530 - (lib: Fix coldboot race condition observed on emulators/simulators) This brings in 44 new commits. Change-Id: Ide6e3c2bb98e79750b40a9b8ca9f2f1d2c123628 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03Update vboot submodule to upstream masterPatrick Georgi
Updating from commit id e6700f4c: 2019-08-13 04:36:52 +0000 - (vboot: update vboot2 functions to use new vb2_error_t) to commit id b2c8984d: 2019-10-01 06:01:59 +0000 - (vboot: fix compile error with MOCK_TPM) This brings in 71 new commits. Change-Id: Id7cefa3ad5b30c955d18e469494fec32f6f58a48 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03intel/fsp_baytrail: Drop some PCI scratchpad register definitionsKyösti Mälkki
These were unused and somewhat cryptic, assumed purpose was to store pre-CBMEM timestamps in various PCI config space locations. Change-Id: I074294446501d49a9bd3c823a2a794c33f443168 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35731 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03util/release: add gerrit stats scriptMartin Roth
This tool downloads, caches and analyzes commits pushed to gerrit for a specified range of commits. Currently it only works over SSH. Data that is printed about the range of commits: CSV Data about each individual commit: - Commit ID - Commit Date - Author - Commiter - Submitter - Lines added - Lines removed - Title - Reviewers It then prints the analysis it did on the data: - Total Commits - Total lines added - Total lines removed - Total difference - Authors - Number of commits - Total Authors - Authors - Lines added - Authors - Lines removed - Reviewers - Number of patches reviewed - Submitters - Number of patches submitted The script relies on a number of perl modules which must be installed separately. Change-Id: I74896a97b5fe370c0b08562ac85d29435e438a31 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/14225 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03buildgcc: Run aclocal before configureStefan Reinauer
Ubuntu 19.04 will fail looking for aclocal-1.15 if the scripts are not regenerated because 19.04 ships with 1.16. There are not enough eyes to roll when working with GNU autotools. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I4aa9f520499930ffc984ab0b0144c9c6b2e544a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03util/crossgcc: Add patch for __alloca missing on ubuntu 18.04Martin Roth
Bring this over from the HEADS repo. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I36dc9860f4c4a2675fd3fa24fa3e534215ceb43e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-02intel/quark: Drop xx_DEV_FUNCKyösti Mälkki
Intel adopted xx_DEVFN_xx naming for macros expanding to PCI_DEVFN() starting with apollolake. The ones named xx_DEV_FUNC are being renamed, or dropped, if they were generally not used at all for a platform. Change-Id: Ice1062d10b793dcbeb5b2ce9e2788fd3b6b6250b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02intel/skylake: Refactor IRQ assignmentsKyösti Mälkki
When creating the IRQ routing, referenced device and function number are always of the same PCI device. Change-Id: Ifc4795245187f8d70650242a56e6ce771ef2167a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35735 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02intel/pci_devs: Regroup PCI xx_DEVID entriesKyösti Mälkki
Change-Id: I953e9a7746232b4c40deca55eb6cb3bd7af91496 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02libpayload: Add fmap_cache to sysinfo_tFurquan Shaikh
Now that FMAP is cached in CBMEM and its pointer is added to coreboot table for quick lookup, this change adds a new member "fmap_cache" to sysinfo_t that can be used by payloads to get to FMAP cache. BUG=b:141723751 Change-Id: If894c20c2de89a9d8564561bc7780c86f3f4135a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02mb/google/drallion: Disable GBE in firmware for drallion variantsThejaswani Putta
BUG: None TEST: Build successful, checked the CBMEM log if 1f.6 is disabled with this patch Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.corp-partner.google.com> Change-Id: I4e74b259ce8f5f70833dce94692dcbe33e8504db Reviewed-on: https://review.coreboot.org/c/coreboot/+/35509 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02intel/baytrail: Replace config_of(dev) with config_of_soc()Kyösti Mälkki
The function does not otherwise need dev. Change-Id: I75d3283b537151258ed48f7e4e0991dff53a803c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35670 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel: Replace config_of_path() with config_of_soc()Kyösti Mälkki
The previously provided device path made no difference, all integrated PCI devices point back to the same chip_info structure. Change reduces the exposure of various SA_DEVFN_xx and PCH_DEVFN_xx from (ugly) soc/pci_devs.h. Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02coreinfo/coreinfo.c: Support both lower and upper case alphabetsHimanshu Sahdev
Modify handle_category_key to handle both upper and lower case alphabets in the coreinfo payload. Change-Id: I3ccbf69e90ba7824ad6ec85d2ca59aa8f40b3006 Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-02mb/google/drallion: Dynamicly disable memory channelEric Lai
Disable memory channel by HW strap pin. Using for factory debug. BUG=b:139773082 BRANCH=N/A TEST=Rework HW strap pin and check /proc/mem_info Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic5f53f0ba3bd432fbcb7513d2a8aa49d42f7a23e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
Two fields of struct sdram_params are renamed for future CL of DRAM full calibration. Field 'impedance' is also removed. BUG=none BRANCH=none TEST=emerge-kukui coreboot Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02sb/intel/common/smihandler: Hook up smmstoreArthur Heymans
TESTED on Asus P5QC. Change-Id: I20b87f3dcb898656ad31478820dd5153e4053cb2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30012 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel/skylake: devicetree: introduce PchHdaVcType fsp parameterMichael Niewöhner
Make the the FSP Parameter PchHdaVcType a devicetree setting and make use of it in the devicetrees of all boards that currently set it. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2019-10-01Documentation/mainboard/amd: Add padmelon documentation and imagesRichard Spiegel
Create documentation on padmelon, including how to program the SPI. Also include an index.md pointing to the documentation, as currently there's no maiboard documentation folder for AMD. BUG=none. TEST=none. Change-Id: I1a684c1acd3fb9441df71e2bc0fffa6131148b98 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-01Documentation/soc/amd: Add Family 15hRichard Spiegel
Create documentation for AMD Family 15h. BUG=none. TEST=none. Change-Id: Iaab4edc431329a691283121494595f3797c566c6 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-10-01mediatek/mt8183: Allow modifying vcore voltageHsin-Hsiung Wang
Because vcore is the power of ddrphy in the soc, DRAM DVFS needs to be calibrated with different vcore voltages to get correct parameters. A new API is added to allow changing vcore voltage. BUG=b:80501386 BRANCH=none TEST=measure vcore voltage with multimeter Change-Id: Ic43d5efe7e597121775dc853a3e2a08ebc59657d Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33391 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-01cpu/intel/common: Move intel_ht_sibling() to common folderPatrick Rudolph
Make intel_ht_sibling() available on all platforms. Will be used in MP init to only write "Core" MSRs from one thread on HyperThreading enabled platforms, to prevent race conditions and resulting #GP if MSRs are written twice or are already locked. Change-Id: I5d000b34ba4c6536dc866fbaf106b78e905e3e35 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-01mb/kontron/986lcd-m: Add gameport base allocation workaroundPetr Cvek
A missing definition of gameport base (PNP io 0x60) will cause an automatic address assignment during PCI/PNP enumeration, which won't obey limit 0x7ff. This will cause the enumeration to fail as other devices already have the values enabled. The symptoms are: not working USB, PS/2, garbled UART console, not working PCIe GPUs and crashes. Probably because of wrongly assigned IO ports. Example of log (shortened): Done reading resources. Setting resources... !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.0 1c * [0x0 - 0xfff] io !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.1 1c * [0x1000 - 0x1fff] io !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.2 1c * [0x2000 - 0x2fff] io !! Resource didn't fit !! aligned base 400 size 10 limit 2e7 40f needs to be <= 2e7 (limit) PCI: 00:1f.2 20 * [0x3080 - 0x308f] io !! Resource didn't fit !! ... ERROR: PCI: 00:02.0 14 io size: 0x0000000008 not assigned ... ERROR: PCI: 00:1f.2 10 io size: 0x0000000008 not assigned ERROR: PCI: 00:1f.2 14 io size: 0x0000000004 not assigned ERROR: PCI: 00:1f.2 18 io size: 0x0000000008 not assigned ERROR: PCI: 00:1f.2 1c io size: 0x0000000004 not assigned ERROR: PCI: 00:1f.2 20 io size: 0x0000000010 not assigned ... PCI: 00:1b.0 subsystem <- 8086/27d8 PCI: 00:1b.0 cmd <- 102 PCI: 00:1c.0 bridge ctrl <- 0003 PCI: 00:1c.0 subsystem <- 8086/27d0 PCI: 00:1c.0 cmd <- 107 PCI: 00:1c.1 brids70c01mcu0PeC: 0 dV0i8s0immicrocode: upd10a00000y0025 x666600CPU physiaB 0 0 e k MTRR cheaeu60zeAttemfWaiting for 1st Sot AP: slot 1 apic_L0ecl0zsax a aInitiNntt kac:oIG0 Ua dUrSGSGL Ct0C07fintel_vga_int15_h VGA Option ROM wa7..Azalia0Azalia: codkAbCiPCI: 00:1c.0 init finished We can see the ports probably started to collide after the activation of 00:1c.0 device. A debug run with compiled SPEW shows the problem with enumeration: PCI: 00:1f.1 18 * [0x50b8 - 0x50bf] io PCI: 00:1f.2 10 * [0x50c0 - 0x50c7] io PCI: 00:1f.2 18 * [0x50c8 - 0x50cf] io PCI: 00:1f.1 14 * [0x50d0 - 0x50d3] io PCI: 00:1f.1 1c * [0x50d4 - 0x50d7] io PCI: 00:1f.2 14 * [0x50d8 - 0x50db] io PCI: 00:1f.2 1c * [0x50dc - 0x50df] io PNP: 002e.7 60 * [0x50e0 - 0x50e0] io <-- gameport base DOMAIN: 0000 io: base: 50e1 size: 40e1 align: 12 gran: 0 limit: 7ff done Notice a weird base for DOMAIN, along with the limit. Adding a definition of gameport (0x220) as a workaround fixes the problems. The gameport should be still disabled thanks to disable bits (W83627THF datasheet is little bit chaotic). I didn't find any info if the gameport is available on some pads of the motherboard. Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Change-Id: Ie8e42552ac5e638e91e5c290655edcce1f64e408 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 04:49:38 +0000